共查询到20条相似文献，搜索用时 31 毫秒
1.
2.
The roll damping characteristics of three models of a 3-ton class fishing vessel representing the bare hull, hull with bilge keels, and hull with bilge keels and a central wing are investigated by the free roll decay tests in calm water and also in uniform head waves in a towing tank. Speed and roll initial angle and OG (distance between the centers of gravity and roll) are varied to check their dependence on roll damping. The experimental results are compared with the numerical results of mathematical modeling by the energy method and the energy dissipation patterns are also compared for these three models. The bilge keel contributes significantly to the increment of the roll damping for zero speed but as speed increases, the lift generated by the central wing contributes significantly to the roll damping increase. In addition, it is shown that the roll damping is more or less influenced by the regular head waves. 相似文献
3.
Mark A. Gammon 《Ocean Engineering》2011,38(10):1054-1064
A fishing boat hull is used as an example of how hull form optimization can be accomplished using a Multi-Objective Genetic Algorithm (MOGA). The particular MOGA developed during this study allows automatic selection of a few Pareto Optimal results for examination by the designers while searching the complete Pareto Front. The optimization uses three performance indices for resistance, seakeeping and stability to modify the hull shape to obtain optimal hull offsets as well as optimal values for the principal parameters of length, beam and draft. The modification of the 148/1-B fishing boat hull, the parent hull form of the ?stanbul Technical University (?TÜ) series of fishing boats, is presented by first fixing the principal parameters and allowing the hull offsets to change, and secondly by simultaneously allowing variation of both the principal parameters and the hull offsets. Improvements in all three objectives were found. For further research the methodology can be modified to allow for the addition of other performance objectives, such as cost or specific mission objectives, as well as the use of enhanced performance prediction solvers. In addition, one or more hulls could be evaluated by experiment to validate the results of using this particular optimization approach. 相似文献
4.
海洋调查船是了解认知与开发利用海洋的关键基础设施。欧洲海洋调查船运作组织(ERVO)推动这一关键基础设施协同的努力颇具代表性。它面对欧洲海洋调查船多元化且无权威主体的境地,通过会员制构建协同平台,明晰了业务主导、可持续发展的协作目标;它通过年会聚焦海洋调查船及相关仪器装备,交流运行管理,研讨技术创新、改造更新以及与海洋调查船相关的共性话题,以促进欧洲海洋调查船和相关装备具有最佳的运行成效;它与相关海洋调查与研究组织机构联动,跻身于欧洲海洋调查船发展战略层,推动欧洲海洋调查船在项目层面组队共享。文章解析了欧洲海洋调查船运作组织的背景和运作模式,同时针对我国海洋调查船协作多头发力缺乏合纵连横的状况,提议发起中国海洋调查船协同论坛,组建联合工作组做好长期务实的基础性工作,筹划中国及关系国调查船协调计划,以建立我国海洋调查船协同机制并逐步跻身国际海洋调查船战略协同层。 相似文献
5.
6.
When a vessel is damaged, seawater floods into the damaged compartments and subsequently influences the motion of the vessel. Furthermore, the vessel’s behaviour affects the floodwater motion. In this paper, a Navier-Stokes (NS) solver with a free surface capturing technique, i.e., the volume of fluid (VOF) method, was developed to numerically simulate water flooding into a damaged vessel. To verify the developed solver, a 2-D and a 3-D dam break problems were tested. The numerical results coincide well with the experimental results and with the published numerical results. Additionally, it was used to solve the problems of linear and non-linear liquid sloshing in a hexahedral tank. The numerical results are satisfactory in comparison with the experimental results and analytical solutions. Finally, the phenomenon of water flooding into a damaged compartment of a Ro-Ro ferry was simulated numerically. The computed results are in good agreement with the experimental data. 相似文献
7.
Tan Jiahua Ma Wei Pan Bin Associate Professor Shanghai Jiao Tong University Shanghai Lecturer shanghai Jiao Tong University Shanghai 《中国海洋工程》1992,(1)
The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined. 相似文献
8.
结合模型试验和数值计算对大潜深、带大开口的球形耐压结构静态力学性能进行了研究。研究中考虑到材料非线性、非弹性的因素,通过对材料拉伸试验曲线的分析,得到了材料应力-应变的近似表达式;并且利用超声测厚仪对结构模型的几何缺陷进行了测量。同时基于参数化设计语言建立了有随机几何缺陷的有限元模型,并利用接触单元考虑了大开口观察窗与耐压结构的联系。试验验证表明论文提出的利用有限元软件分析大潜深、大开口耐压壳体力学性能的计算方法和计算策略是准确可靠的,所获得的结果可供设计使用。 相似文献
9.
Griffiths Gwyn; Enoch Peter; Millard Nicholas W. 《ICES Journal of Marine Science》2001,58(6):1195-1200
10.
近年来,国内兴起了大力发展半潜式起重平台的势头,系泊系统的设计与优化是该类型平台开发中的关键问题之一。采用时域方法对半潜式起重平台系泊系统进行耦合动力分析,研究系泊系统主要参数对其动力响应特性的影响,并给出主要参数的设计优化流程,在此基础上,以能够满足安全校核且性能较优的系泊方案为目标,对该半潜式起重平台的系泊系统进行优化设计,并研究单根系泊缆发生破断对整个系泊系统的影响。结果表明:基于主要参数对系泊性能的影响规律,经优化设计得到的系泊方案,预留的安全欲度适中,能够保障半潜式起重平台在恶劣海况下的生存能力,同时具备较好的经济性。 相似文献
11.
Until recently, vessel collisions with small cetaceans were presumed rare, mainly as a consequence of limited reporting. Observations on dolphin wound healing from propeller strike injuries also remain scarce. We present an extreme case of a bottlenose dolphin (Tursiops truncatus) with multiple propeller wounds, including a penetration to the bone, where survival was possible for at least 23 days post injury. We used photographic records in conjunction with field observations to describe wound progression in the absence of treatment. Considering the severity of the wounds, it was surprising that the injuries were not immediately fatal. A practical solution remains to be found for the problem of odontocete vessel collisions, in particular for small highly mobile species using neritic waters. In view of the ongoing problem in the Hauraki Gulf and, indeed, worldwide, we recommend continued evaluation of cases and reporting of incidents, in addition to investigations into mechanisms that may reduce the risk of occurrence of vessel collisions with cetaceans. 相似文献
12.
采用移动粒子半隐式法(moving particle semi-implicit,简称MPS)对自由漂浮二维方舱的破舱瞬时进水过程进行数值模拟。首先,采用基于GPU平台自主开发的MPS软件模拟破舱进水问题,并与其他方法得到的数值模拟结果进行对比验证。然后,对该二维方舱的各种模型进行了数值模拟,其中开孔位于不同位置以表示舷侧不同高度下的损坏。此外,还研究了不同类型的挡板对破舱进水后方舱稳定性的影响。结果表明损坏的孔洞和内部挡板会影响损坏舱段的运动特性,开孔距静水面的距离越大引起舱段的横摇等运动幅度越大,垂直挡板比水平挡板对舱内洪水的影响更大。 相似文献
13.
新型双船起重拆除平台试验研究 总被引：1，自引：1，他引：0
拆除大型海上结构物是一项非常复杂且充满挑战的工程。现提出一种新型海上平台拆除方案,该方案利用三条半潜船来代替具有重型起重装置的单一船舶,通过两艘相同的半潜船将平台上层建筑托起,随后运至第三艘半潜船上完成平台拆除。在风浪流作用下,半潜船和平台的所处方位和运动姿态一直处于动态变化中,这对船舶调节压载的稳定性以及双船运动的同步性提出了要求。为了确保该方案的高效性和安全性,设计了一套完整的模型试验装置,包括船舶模型、平台拆卸辅助设备、六自由度运动采集与分析系统、控制系统、无线通讯系统以及测量系统。开展了相应的水池试验,试验结果验证了双船起重拆除平台方案中双船协同运输这一关键环节的可行性和安全性。 相似文献
14.
Mohammad Saeed SEIF Ebrahim JAHANBAKHSH Roozbeh PANAHI Mohammad Hossein KARIMI 《海洋工程》2009,(3):517-528
High speed planing hulls have complex hydrodynamic behaviors. The trim angle and drafts are very sensitive to speed and location of the center of gravity. Therefore, motion simulation for such vessels needs a strong coupling between rigid body motions and hydrodynamic analysis. In addition, free surface should be predicted with good accuracy for each time step. In this paper, velocity and pressure fields are coupled by use of the fractional step method. On the basis of integration of the two-phase viscous flow induced stresses over the hull, acting loads (forces and moments) are calculated. With the strategy of boundary-fitted body-attached mesh and calculation of 6-DoF motions in each time step, time history of ship motions including displacements, speeds and accelerations are evaluated. For the demonstration of the software capabilities, circular cylinder slamming is simulated as a simple type of water slamming. Then, a high-speed planing catamaran is investigated in the case of steady forward motion. All of the results are in good concordance with experimental data. The present method can be widely implemented in design as well as in performance prediction of high-speed vessels. 相似文献
15.
16.
Mohammad Saeed SEIF Ebrahim JAHANBAKHSH Roozbeh PANAHI Mohammad Hossein KARIMI 《中国海洋工程》2009,23(3):517-528
High speed planing hulls have complex hydrodynamic behaviors. The trim angle and drafts are very sensitive to speed and location of the center of gravity. Therefore, motion simulation for such vessels needs a strong coupling between rigid body motions and hydrodynamic analysis. In addition, free surface should be predicted with good accuracy for each time step. In this paper, velocity and pressure fields are coupled by use of the fractional step method. On the basis of integration of the two-phase viscous f... 相似文献
17.
Stability of the marine vessels in different conditions is one of the most important problems in the design of a planing vessel. In this research, the effects of some important design parameters (mass, longitudinal center of mass, deadrise angle, and length) of DTMB 62 model 4667-1 planing hull on the drag and also on the longitudinal dynamic stability (porpoising) are investigated in the velocity range of 2.12–8.486 m/s in calm water. In this paper, both numerical simulation of Reynolds Average Naiver Stokes (RANS) equations and semi-empirical formulas of Savitsky are used to analyze the motion of a 4667 planing vessel in calm water with two degrees of freedom (2DOF). For this purpose a finite volume, ANSYS-FLUENT, code is used to solve the Navier-Stokes equations for the simulation of the flow field around the vessel. In addition, an explicit VOF scheme and SST- Kω model is used with dynamic mesh scheme to capture the interface of a two-phase flow and to model the turbulence respectively, in 2DOF model (heave and pitch). Also, the results of both methods are compared with each other. According to the present results, changing the aspect ratio of the vessel and also the longitudinal center of gravity have the most effect on the porpoising region. 相似文献
18.
Analysis of a craft with two degrees of freedom (2DOF) consumes time more than simulation of a craft with a fixed trim condition; therefore in most of the previous researches fixed trim condition is taken into account to analyze the flow field around a craft in shallow water and head sea wave conditions. In this paper numerical simulation of Reynolds Average Naiver Stokes (RANS) equations are used to analyze the motion of DTMB 62 model 4667-1 planing vessel in calm water and head sea waves in both deep and shallow water with two degrees of freedom (heave and pitch). For this purpose, a finite volume ANSYS-FLUENT code is used to solve the Navier-Stokes equations for the simulation of the flow field around the vessel. In addition, an explicit VOF scheme and SST k-ω model is used with dynamic mesh scheme to capture the interface of a two-phase flow and to model the turbulence respectively in the 2DOF model.Regarding the results, reducing the wavelength and also the depth of the water can increase the drag force. Also comparing the results of a fixed trim vessel with the results of a free to sink and trim one in calm water shows a difference of approximately 50% in the drag force in shallow water. 相似文献
19.
关于沟弧盆构造体系下的海底热液活动,因涉及的问题繁多,一直是海洋地质学界十分注目的重要研究课题。相比之下,西太平洋沟弧盆体系的马里亚纳海槽和西南太平洋的汤加－斐济海盆中的劳海盆都有ＤＳＤＰ／ＯＤＰ的支撑,有关海底热液活动及其构造属性、地壳类型、形成时代等已有了十分明确的结论,唯冲绳海槽至今尚未有此机会。为了迎接１９９８年大洋钻探船来西太平洋海域,特建议在冲绳海槽设站钻探,可在地理座标２７°１５′～２７°３５′Ｎ,１２６°５６′～１２７°１０′Ｅ的范围、水深１３００～１５５０ｍ水域内海底热液活动活跃区选站,连续钻探４～５孔,其目的拟解决以下４个问题：１．冲绳海槽现代海底热液活动通道在岩层中的最大透过深度及其岩石学性质;２．冲绳海槽的热液类型和成岩成矿作用;３．热液活动与地壳性质;４．热液活动在沟弧盆体系演化中的意义。 相似文献
20.
Maiorano Luigi; Bartolino Valerio; Colloca Francesco; Abella Alvaro; Belluscio Andrea; Carpentieri Paolo; Criscoli Alessandro; Jona Lasinio Giovanna; Mannini Alessandro; Pranovi Fabio; Reale Bruno; Relini Giulio; Viva Claudio; Ardizzone Gian Domenico 《ICES Journal of Marine Science》2009,66(1):137-146