首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Based on simple CIPW norms for the proposed terrestrial upper mantle material, it is shown that if the Moon fissioned from the Earth and gravitationally differentiated, it could have a 72 km thick anorthosite (An97) crust, a calcium poor (3.8% by weight) pyroxenite upper mantle 100 Mg/Mg + Fe = 75 to 80) ending at a depth of 313 km and a dunite (Fo93_95) lower mantle below a depth of 313 km. Refinements of these simple norm models, based on the cooling history, crystallization sequence and the variations of the 100 Mg/Mg + Fe ratio of the liquid and crystals during the crystallization sequence, indicate that the final form of such a Moon could have the following properties: (1) a primitive, cumulate anorthosite - minor troctolite crust with intrusive and extrusive feldspathic basalts and KREEP rich norites; the thickness of this crust would be 75 km; (2) a zone in the bottom of the crust and the top of the upper mantle which is rich in KREEP, the incompatible elements, silica, and possibly voltiles; this zone would be the source area for the upland feldspathic basalts, KREEP rich norites and KREEP and silica rich fluids; (3) an upper mantle between the depths of 75 km and 350 to 400 km which consists of peridotite containing 80–85% pyroxene (Wo10En68_72Fs18_22) and 15–20% olivine (Fo75_80); the Al2O3 content of the upper mantle is 3%; the peridotite layer would be the source area for mare basalts and; (4) a lower mantle below a depth of 350–400 km which consists of dunite (Fo93_97).The cooling history of such a moon indicates that the primitive anorthosite crust would have been completely formed within 108 yr after fission. The extrusion and intrusion of upland basalts and KREEP rich norites and the metamorphism of the crustal rocks via KREEP and silica rich fluids would have ended about 4 × 109 yr ago when cooling well below the solidus reached a depth of 150 km. As cooling continied, the only source of magmas after 4 × 109 yr ago would have been the peridotite upper mantle, i.e. the source area of the mare basalts. Extrusion of mare basalts ended when cooling below the solidus reached the top of the refractory dunite lower mantle 3-3.3 × 109 yr ago.Thus, it is shown that the chemistry, primary lithology, structure and developmental history of a fissioned Moon readily match those known for the real Moon. As such, the models presented in this paper strongly support the fission origin of the Moon.Guest Scientist, supported by the Alexander von Humboldt-Stiftung.Permanent Address.  相似文献   

2.
Abstract– Lunar meteorite Northeast Africa (NEA) 001 is a feldspathic regolith breccia. This study presents the results of electron microprobe and LA‐ICP‐MS analyses of a section of NEA 001. We identify a range of lunar lithologies including feldspathic impact melt, ferroan noritic anorthosite and magnesian feldspathic clasts, and several very‐low titanium (VLT) basalt clasts. The largest of these basalt clasts has a rare earth element (REE) pattern with light‐REE (LREE) depletion and a positive Euanomaly. This clast also exhibits low incompatible trace element (ITE) concentrations (e.g., <0.1 ppm Th, <0.5 ppm Sm), indicating that it has originated from a parent melt that did not assimilate KREEP material. Positive Eu‐anomalies and such low‐ITE concentrations are uncharacteristic of most basalts returned by the Apollo and Luna missions, and basaltic lunar meteorite samples. We suggest that these features are consistent with the VLT clasts crystallizing from a parent melt which was derived from early mantle cumulates that formed prior to the separation of plagioclase in the lunar magma ocean, as has previously been proposed for some other lunar VLT basalts. Feldspathic impact melts within the sample are found to be more mafic than estimations for the composition of the upper feldspathic lunar crust, suggesting that they may have melted and incorporated material from the lower lunar crust (possibly in large basin‐forming events). The generally feldspathic nature of the impact melt clasts, lack of a KREEP component, and the compositions of the basaltic clasts, leads us to suggest that the meteorite has been sourced from the Outer‐Feldspathic Highlands Terrane (FHT‐O), probably on the lunar farside and within about 1000 km of sources of both Low‐Ti and VLT basalts, the latter possibly existing as cryptomaria deposits.  相似文献   

3.
Mare basalts provide insights into the composition and thermal history of the lunar mantle. The ages of mare basalts suggest a first peak of magma activity at 3.2–3.8 Ga and a second peak at ~2 Ga. In this study, we reassess the correlation between the titanium contents and the eruption ages of mare basalt units using the compositional and chronological data updated by SELENE (Kaguya). Using morphological and geological criteria, we calculated the titanium content of 261 mare units across a representative area of each mare unit. In the Procellarum KREEP Terrane, where the latest eruptions are located, an increase in the mean titanium content is observed during the Eratosthenian period, as reported by previous studies. We found that the increase in the mean titanium content occurred within a relatively short period near approximately 2.3 Ga, suggesting that the magma source of the mare basalts changed at this particular age. Moreover, the high‐titanium basaltic eruptions are correlated with a second peak in volcanic activity near ~2 Ga. The high‐titanium basaltic eruptions occurring during the last volcanic activity period can be explained by the three possible scenarios (1) the ilmenite‐bearing cumulate rich layer in the core‐mantle boundary formed after the mantle overturn, (2) the basaltic material layers beneath the lunar crust formed through upwelling magmas, and (3) ilmenite‐bearing cumulate blocks remained in the upper mantle after the mantle overturn.  相似文献   

4.
The regolith samples returned by the Chang'E-5 mission (CE-5) contain the youngest radiometrically dated mare basaltic clasts, which provide an opportunity to elucidate the magmatic activities on the Moon during the late Eratosthenian. In this study, detailed petrographic observations and comprehensive geochemical analyses were performed on the CE-5 basaltic clasts. The major element concentrations in individual plagioclase grain of the CE-5 basalts may vary slightly from core to rim, whereas pyroxene has clear chemical zonation. The crystallization sequence of the CE-5 mare basalts was determined using petrographic and geochemical relations in the basaltic clasts. In addition, both fractional crystallization (FC) and assimilation and fractional crystallization models were applied to simulate the chemical evolution of melt equilibrated with plagioclase in CE-5 basalts. Our results reveal that the melt had a TiO2 content of ~3 wt% and an Mg# of ~45 at the onset of plagioclase crystallization, suggesting a low-Ti parental melt of the CE-5 basalts. The relatively high FeO content (>14.5 wt%) in melt equilibrated with plagioclase could have resulted in extensive crystallization of ilmenite, unlike in Apollo low-Ti basalts. Furthermore, our calculations showed that the geochemical evolution of CE-5 basaltic melt could not have occurred in a closed system. On the contrary, the CE-5 basalts could have assimilated mineral, rock, and glass fragments that have higher concentrations of KREEP elements (potassium, rare earth elements, and phosphorus) in the regolith during magma flow on the Moon's surface. The presence of the KREEP signature in the CE-5 basalts is consistent with literature remote sensing data obtained from the CE-5 landing site. These KREEP-bearing fragments could originate from KREEP basaltic melts that may have been emplaced at the landing site earlier than the CE-5 basalts.  相似文献   

5.
The titanium contents of lunar mare basalts   总被引：1，自引：0，他引：1  
Abstract— Lunar mare basalt sample data suggest that there is a bimodal distribution of TiO2 concentrations. Using a refined technique for remote determination of TiO2, we find that the maria actually vary continuously from low to high values. The reason for the discrepancy is that the nine lunar sample return missions were not situated near intermediate basalt regions. Moreover, maria with 2–4 wt% TiO2 are most abundant, and abundance decreases with increasing TiO2. Maria surfaces with TiO2 >5 wt% constitute only 20% of the maria. Although impact mixing of basalts with differing Ti concentrations may smear out the distribution and decrease the abundance of high‐Ti basalts, the distribution of basalt Ti contents probably reflects both the relative abundances of ilmenite‐free and ilmenite‐bearing mantle sources. This distribution is consistent with models of the formation of mare source regions as cumulates from the lunar magma ocean.  相似文献   

6.
Abstract— Dhofar 287 (Dho 287), a recently found lunar meteorite, consists in large part (95%) of low‐Ti mare basalt (Dho 287A) and a minor, attached portion (?5%) of regolith breccia (Dho 287B). The present study is directed mainly at the breccia portion of this meteorite. This breccia consists of a variety of lithic clasts and mineral fragments set in a fine‐grained matrix and minor impact melt. The majority of clasts and minerals appear to have been mainly derived from the low‐Ti basalt suite, similar to that of Dho 287A. Very low‐Ti (VLT) basalts are a minor lithology of the breccia. These are significantly lower in Mg# and slightly higher in Ti compared to Luna 24 and Apollo 17 VLT basalts. Picritic glasses constitute another minor component of the breccia and are compositionally similar to Apollo 15 green glasses. Dho 287B also contains abundant fragments of Mg‐rich pyroxene and anorthite‐rich plagioclase grains that are absent in the lithic clasts. Such fragments appear to have been derived from a coarse‐grained, Mg#‐rich, Na‐poor lithology. A KREEP component is apparent in chemistry, but no highlands lithologies were identified. The Dho 287 basaltic lithologies cannot be explained by near‐surface fractionation of a single parental magma. Instead, magma compositions are represented by a picritic glass; a low‐Ti, Na‐poor glass; and a low‐Ti, Na‐enriched source (similar to the Dho 287A parental melt). Compositional differences among parent melts could reflect inhomogeneity of the lunar mantle. Alternatively, the low‐Ti, Na‐poor, and Dho 287A parent melts could be of hybrid compositions, resulting from assimilation of KREEP by picritic magma. Thus, the Dho 287B breccia contains lithologies from multiple magmatic eruptions, which differed in composition, formational conditions, and cooling histories. Based on this study, the Dho 287 is inferred to have been ejected from a region located distal to highlands terrains, possibly from the western limb of the lunar nearside, dominated by mare basalts and KREEP‐rich lithologies.  相似文献   

7.
C.C. Reese  V.S. Solomatov 《Icarus》2006,184(1):102-120
The evolution of a melt region produced by a large impact during Mars formation is addressed. While some impact induced melt is redistributed during crater excavation, sufficiently large impacts (much larger than basin forming impacts) generate an intact melt region which is retained beneath the excavation zone, i.e., a local magma ocean. Local magma ocean evolution depends on the effective rheology controlling large scale deformation of the solid part of the planet, mechanism of crystallization, and melt region size. Within the uncertainties of various parameters, two scenarios are possible. For sufficiently weak rheology or large melt region size, evolution is characterized by rapid extrusion and formation of a global magma ocean. For sufficiently strong rheology or small melt region size, in situ crystallization to a partially molten solid state occurs prior to isostatic adjustment. Subsequent to in situ crystallization, local magma ocean evolution depends on melt region size and efficiency of lateral redistribution compared to bulk conductive cooling. For large melt regions, lateral spreading occurs via plastic deformation and results in an asymmetric, global, partial melt layer. For small melt region size, viscous spreading viscous can result in bulk cooling below the solidus prior to formation of a global layer. A hypothesis for the origin of the hemispherical crustal dichotomy and Tharsis rise is suggested. The dichotomy is associated with a global partial melt layer produced by evolution of a large, local magma ocean. After dichotomy formation, evolution of a second, smaller, local magma ocean is related to Tharsis development.  相似文献   

8.
Abstract— The oxygen fugacity of olivine‐phyric martian basalts is estimated using olivine‐pyroxene‐spinel equilibria, supported by detailed petrography. Results are plotted, along with previous oxygen fugacity estimates, against La/Yb, which is used as a proxy for long‐term incompatible‐element depletion or enrichment in martian basalt reservoirs. In general, the correlation between oxygen fugacity and La/Yb observed by Herd et al. (2002a) holds for the olivine‐phyric basalts. The implications of the correlation are re‐evaluated in light of work by Borg et al. (Forthcoming), which indicates that the variations in radiogenic isotopic composition can be modeled by mixing of mantle sources established by 4.5 Ga through crystallization of a magma ocean in lieu of assimilation of crustal material. The results demonstrate that the crust‐like component, interpreted as trapped liquid in a magma ocean cumulate pile, must be oxidized to explain the oxygen fugacity of the martian basalts. Consequently, the pre‐eruptive water contents of the more oxidized basalts are expected to be higher, although water is not called upon as the cause of the oxidation. Unmixing of mantle components provides an important context for the interpretation of oxygen isotopes, demonstrated here, and of samples returned from the martian surface.  相似文献   

9.
Solar magnetic indices are used to model the solar irradiance and ultimately to forecast it. However, the observation of such indices is generally limited to the Earth-facing hemisphere of the Sun. Seismic maps of the far side of the Sun have proven their capability to locate and track medium–large active regions at the non-visible hemisphere. We present here the possibility of using the average signal from these seismic far-side maps, combined with similarly calculated near-side maps, as a proxy to the full-Sun magnetic activity.  相似文献   

10.
Abstract— Available evidence strongly suggests that the HED (howardite, eucrite, diogenite) meteorites are samples of asteroid 4 Vesta. Abundances of the moderately siderophile elements (Ni, Co, Mo, W and P) in the HED mantle indicate that the parent body may have been completely molten during its early history. During cooling of a chondritic composition magma ocean, equilibrium crystallization is fostered by the suspension of crystals in a convecting magma ocean until the crystal fraction reaches a critical value near 0.80, when the convective system freezes and melts segregate from crystals by gravitational forces. The extruded liquids are similar in composition to Main Group and Stannern trend eucrites, and the last pyroxenes to precipitate out of this ocean (before convective lockup) span the compositional range of the diogenites. Subsequent fractional crystallization of a Main Group eucrite liquid, which has been isolated as a body of magma, produces the Nuevo Laredo trend and the cumulate eucrites. The predicted cumulate mineral compositions are in close agreement with phase compositions analyzed in the cumulate eucrites. Thus, eucrites and diogenites are shown to have formed as part of a simple and continuous crystallization sequence starting with a magma ocean environment on an asteroidal size parent body that is consistent with Vesta.  相似文献   

11.
Petrological analysis of the Martian meteorites suggests that rheologically significant amounts of water are present in the Martian mantle. A bulk mantle water content of at least a few tens of ppm is thus expected to be present despite the potentially efficient degassing during accretion, magma ocean solidification, and subsequent volcanism. We examine the dynamical consequences of different thermochemical evolution scenarios testing whether they can lead to the formation and preservation of mantle reservoirs, and compare model predictions with available data. First, the simplest scenario of a homogenous mantle that emerges when ignoring density changes caused by the extraction of partial melt is found to be inconsistent with the isotopic evidence for distinct reservoirs provided by the analysis of the Martian meteorites. In a second scenario, reservoirs can form as a result of partial melting that induces a density change in the depleted mantle with respect to its primordial composition. However, efficient mantle mixing prevents these reservoirs from being preserved until present unless they are located in the stagnant lid. Finally, reservoirs could be formed during fractional crystallization of a magma ocean. In this case, however, the mantle would likely end up being stably stratified as a result of the global overturn expected to accompany the fractional crystallization. Depending on the assumed density contrast, little secondary crust would be produced and the lithosphere would be extremely cool and dry, in contrast to observations. In summary, it is very challenging to obtain a self‐consistent evolution scenario that satisfies all available constraints.  相似文献   

12.
We report results of systematic experimental simulation of fractional crystallization of a lunar magma ocean (LMO) with the Lunar Primitive Upper Mantle bulk composition. These results complement prior work that simulated equilibrium crystallization. In contrast to previous numerical models for investigating magma ocean solidification processes and implications, our combined program simulates these processes directly using petrologic experimentation. Our experiments mimic LMO crystallization that is fractional throughout the process, rather than switching from initially equilibrium to fractional crystallization partway through. To do this, we adopted an iterative approach in which the starting material for each run is synthesized using the composition of the melt phase from the prior run. We compare our results to those from long-standing numerical models of LMO crystallization and show that although some features of those models are broadly reproduced, there are key differences in liquid lines of descent and the cumulate lithologies generated. Our results can be used to estimate the possible thickness of a primordial lunar crust formed from flotation of plagioclase during magma ocean solidification. Our estimate is greater than that from the recent Gravity Recovery and Interior Laboratory (GRAIL) mission, but consistent with the criteria on which the starting bulk composition was originally calculated. It assumes perfectly efficient separation of all plagioclase formed from the crystallizing magma ocean, which is likely not the case. We also demonstrate that a non-chondritic bulk composition, with respect to trace elements, is not required in order to generate a KREEP (potassium, rare earth elements, and phosphorus) signature from magma ocean crystallization.  相似文献   

13.
The lunar interior is comprised of two major petrological provinces: (1) an outer zone several hundred km thick which experienced partial melting and crystallization differentiation 4.4–4.6 b.y. ago to form the lunar crust together with an underlying complementary zone of ultramafic cumulates and residua, and (2) the primordial deep interior which was the source region for mare basalts (3.2–3.8 b.y.) and had previously been contaminated to varying degrees with highly fractionated material derived from the 4.4–4.6 b.y. differentiation event. In both major petrologic provinces, basaltic magmas have been produced by partial melting. The chemical characteristics and high-pressure phase relationships of these magmas can be used to constrain the bulk compositions of their respective source regions.Primitive low-Ti mare basalts (e.g., 12009, 12002, 15555 and Green Glass) possessing high normative olivine and high Mg and Cr contents, provide the most direct evidence upon the composition of the primordial deep lunar interior. This composition, as estimated on the basis of high pressure equilibria displayed by the above basalts, combined with other geochemical criteria, is found to consist of orthopyroxene + clinopyroxene + olivine with total pyroxenes > olivine, 100 MgO/(MgO + FeO) = 75–80, about 4% of CaO and Al2O3 and 2× chondritic abundances of REE, U and Th. This composition is similar to that of the earth's mantle except for a higher pyroxene/olivine ratio and lower 100 MgO/(MgO + FeO).The lunar crust is believed to have formed by plagioclase elutriation within a vast ocean of parental basaltic magma. The composition of the latter is found experimentally by removing liquidus plagioclase from the observed mean upper crust (gabbroic anorthosite) composition, until the resulting composition becomes multiply saturated with plagioclase and a ferromagnesian phase (olivine). This parental basaltic composition is almost identical with terrestrial oceanic tholeiites, except for partial depletion in the two most volatile components, Na2 and SiO2. Similarity between these two most abundant classes of lunar and terrestrial basaltic magmas strongly implies corresponding similarities between their source regions. The bulk composition of the outer 400 km of the Moon as constrained by the 4.6-4.4 b.y. parental basaltic magma is found to be peridotitic, with olivine > pyroxene, 100 MgO/ (MgO + FeO) 86, and about 2× chondritic abundances of Ca, Al and REE. The Moon thus appears to have a zoned structure, with the deep interior (below 400 km) possessing somewhat higher contents of FeO and SiO2 than the outer 400 km. This zoned model, derived exclusively on petrological grounds, provides a quantitative explanation of the Moon's mean density, moment of inertia and seismic velocity profile.The bulk composition of the entire Moon, thus obtained, is very similar to the pyrolite model composition for the Earth's mantle, except that the Moon is depleted in Na (and other volatile elements) and somewhat enriched in iron. The similarity in major element composition extends also to the abundances of REE, U and Th. These compositional similarities, combined with the identity in oxygen isotope ratios between the Moon and the Earth's mantle, are strongly suggestive of a common genetic relationship.  相似文献   

14.
This study uses experimentally determined plagioclase‐melt D values to estimate the trace element concentrations of Sr, Hf, Ga, W, Mo, Ru, Pd, Au, Ni, and Co in a crystallizing lunar magma ocean at the point of plagioclase flotation. Similarly, experimentally determined metal‐silicate partition experiments combined with a composition model for the Moon are used to constrain the concentrations of W, Mo, Ru, Pd, Au, Ni, and Co in the lunar magma ocean at the time of core formation. The metal‐silicate derived lunar mantle estimates are generally consistent with previous estimates for the concentration of these elements in the lunar mantle. Plagioclase‐melt derived concentrations for Sr, Ga, Ru, Pd, Au, Ni, and Co are also consistent with prior estimates. Estimates for Hf, W, and Mo, however, are higher. These elements may be concentrated in the residual liquid during fractional crystallization due to their incompatibility. Alternatively, the apparent enrichment could reflect the inappropriate use of bulk anorthosite data, rather than data for plagioclase separates.  相似文献   

15.
It is proposed that the primitive suite of upland rocks formed as a result of the cumulation of plagioclase which crystallized in disequilibrium from a convecting magma containing previously crystallized and co-crystallizing olivine and pyroxene. As the plagioclase was removed from this magma by flotation, it carried with it melt and mafic crystals in varying, but predictable proportions. This model successfully accounts for the major petrological characteristics of the upland suite of rocks, in particular, the reversed An vs Mg' trend, the quartz normative anorthosites and the olivine to pyroxene ratio variations vs plagioclase content of the rocks.It is shown that the crystallization sequence for the Moon is one where the pyroxenes of the peridotite upper mantle and crust were formed as a result of the reaction olivine + quartz (melt) pyroxene. This reaction occurred at depth (100–300 km) in the moon after the dunite lower mantle had formed, but while olivine was still crystallizing at the surface. As a result of this reaction, the crystallization of the last 20% of the Moon took place mainly along the olivine-plagioclase cotectic and not at the olivine-pyroxene-plagioclase peritectic as previously proposed. This crystallization sequence leads directly to an explanation of the fact that olivine rich rocks make up a significant fraction of the crust, despite the presence of a pyroxene dominated upper mantle directly below the crust. Also the reaction olivine + quartz (melt) pyroxene is exothermic and as such provided heat energy at the bottom of the magma system needed to set it into strong convective motion. As a result, the magma was kept stirred and the olivine and pyroxene in the cooling magma were kept in equilibrium with the melt, thus finally producing the relatively uniform peridotite of the upper mantle.A refined model for the distribution of U, Th and K in the crust of a pyroline moon is presented. It is demonstrated that the KREEP layer, which formed at the crust-upper mantle interface at the end of the crystallization of the Moon, was quickly destroyed by impact excavation and the upwards migration of the low melting KREEP materials. As a result of these processes the KREEP layer no longer exists in the Moon and all of its components are mixed in the crust. As a result, the crust contains about 80% of the heat producing U, Th and K of the Moon. The predicted values of the concentrations of U, Th and K in the crust based on this model are almost exactly those found for the average upland crust by the orbiting-ray experiment. This result not only strongly supports the models proposed in this paper but also supports the suggestion that the mean heat flow of the moon is 13–14 ergs/cm2/sec, i.e. that predicted for a Moon of fission origin in an earlier paper.The results and models presented in this paper further support the hypothesis that the Moon is a gravitationally differentiated body which originated by fission from a protoearth.Contribution No. 127, Institut für Geophysik, Kiel.  相似文献   

16.
Abstract— New data for lunar meteorites and a synthesis of literature data have significant implications for the interpretation of global Th data and for the Moon's bulk composition. As presently calibrated (Prettyman et al. 2002), the Lunar Prospector gamma‐ray data imply that the average global surface Th = 1.58 μg/g. However, that calibration yields implausibly high concentrations for the three most Th‐poor documented sampling sites, it extrapolates to a nonzero Lunar Prospector Th, ?0.7 μg/g, at zero sample Th, and it results in a misfit toward too‐high Th when compared with the global regolith Th spectrum as constrained using mainly lunaite regolith breccias. Another problem is manifested by Th versus K systematics. Ground truth data plot consistently to the high‐Th/K side of the Prospector data trend, offset by a factor of 1.2. A new calibration is proposed that represents a compromise between the Th levels indicated by ground truth constraints and the Prettyman et al. (2002) calibration. Conservatively assuming that the Th versus K issue is mostly a K problem, the average global surface Th is estimated to be ?1.35 μg/g. The Moon's remarkable global asymmetry in KREEP abundance is even more pronounced than previously supposed. The surface Th concentration ratio between the hemisphere antipodal to the Procellarum basin and the hemisphere centered on Procellarum is reduced to 0.24 in the new calibration. This extreme disparity is most simply interpreted as a consequence of Procellarum's origin at a time when the Moon still contained at least a thin residual layer of a global magma ocean. Allowing for diminution of Th with depth, the extrapolated bulk crustal Th is ?0.73 μg/g. Further extrapolation to bulk Moon Th yields ?0.07 μg/g, which is nearly identical to the consensus estimate for Earth's primitive mantle. Assuming chondritic proportionality among refractory lithophile elements implies Al2O3 of approximately 3.8 wt%. The Moon's bulk mantle mg ratio is only weakly constrained by seismic and mare‐basaltic data. KREEP‐and mare‐free lunaite regolith samples, other thoroughly polymict lunar meteorites, and a few KREEP‐free Apollo highland samples manifest a remarkable anticorrelation on a plot of Al2O3 versus mg. This trend implies that an important component of the Moon is highly magnesian. The bulk Moon is inferred to have an Earth‐like oxide mg ratio of ?87–88 mol%. The close resemblance between the bulk Moon and Earth's primitive mantle extends to moderately volatile elements, most clearly Mn. Unless major proportions of Cr and V are sequestered into deep mantle spinel, remarkably Earth‐like depletions (versus chondrites) are also inferred for bulk Moon Cr and V.  相似文献   

17.
Magma genesis in the Moon could have been significantly altered by large impacts if they melted solidified residual liquids and late cumulates from the ‘magma ocean’. Calculations of the heat required to melt these materials, under different assumed conditions, are compared to estimates of the total kinetic energy of the Imbrium impact. For a significant amount of these materials to have been melted, they must have been near their solidus temperatures, the impacts must have been very large, and the lunar lithosphere must have been locally heated at depths of 70 to 140 km. Unless the Imbrium impact released at least the maximum estimated kinetic energy, only larger impacts, e.g., the proposed ‘Gargantuan’ impact, could have augmented the intrinsic lunar heat budget enough to locally alter the abundance, timing of eruption, and chemical compositions of lunar magmas. The mechanical and thermal energy generated by such an impact could have been critical in creating (1) the higher concentrations of radioactive elements in the Imbrium/Procellarum area by migration of residual liquids driven by differential lithospheric thickness; and (2) hybrid mare basalts (representing varying proportions of late cumulates and/or residual liquids incorporated into primitive magmas rising from the partially molten lunar interior). Complete compositional spectra of lunar basalts are to be expected, from primitive mare basalts to pure KREEP and to Ti-rich varieties. Comparison of the Gargantuan/Imbrium area with ancient basins in the eastern nearside area suggests that the interplay between the Moon's internal heat engine and the timing of large impacts was a crucial factor in determining the time of tunar volcanism and the chemical composition of the lavas.  相似文献   

18.
Lithium isotope and abundance data are reported for Apollo 15 and 17 mare basalts and the LaPaz low‐Ti mare basalt meteorites, along with lithium isotope data for carbonaceous, ordinary, and enstatite chondrites, and chondrules from the Allende CV3 meteorite. Apollo 15 low‐Ti mare basalts have lower Li contents and lower δ7Li (3.8 ± 1.2‰; all uncertainties are 2 standard deviations) than Apollo 17 high‐Ti mare basalts (δ7Li = 5.2 ± 1.2‰), with evolved LaPaz mare basalts having high Li contents, but similar low δ7Li (3.7 ± 0.5‰) to Apollo 15 mare basalts. In low‐Ti mare basalt 15555, the highest concentrations of Li occur in late‐stage tridymite (>20 ppm) and plagioclase (11 ± 3 ppm), with olivine (6.1 ± 3.8 ppm), pyroxene (4.2 ± 1.6 ppm), and ilmenite (0.8 ± 0.7 ppm) having lower Li concentrations. Values of δ7Li in low‐ and high‐Ti mare basalt sources broadly correlate negatively with 18O/16O and positively with 56Fe/54Fe (low‐Ti: δ7Li ≤4‰; δ56Fe ≤0.04‰; δ18O ≥5.7‰; high‐Ti: δ7Li >6‰; δ56Fe >0.18‰; δ18O <5.4‰). Lithium does not appear to have acted as a volatile element during planetary formation, with subequal Li contents in mare basalts compared with terrestrial, martian, or vestan basaltic rocks. Observed Li isotopic fractionations in mare basalts can potentially be explained through large‐degree, high‐temperature igneous differentiation of their source regions. Progressive magma ocean crystallization led to enrichment in Li and δ7Li in late‐stage liquids, probably as a consequence of preferential retention of 7Li and Li in the melt relative to crystallizing solids. Lithium isotopic fractionation has not been observed during extensive differentiation in terrestrial magmatic systems and may only be recognizable during extensive planetary magmatic differentiation under volatile‐poor conditions, as expected for the lunar magma ocean. Our new analyses of chondrites show that they have δ7Li ranging between ?2.5‰ and 4‰. The higher δ7Li in planetary basalts than in the compilation of chondrites (2.1 ± 1.3‰) demonstrates that differentiated planetary basalts are, on average, isotopically heavier than most chondrites.  相似文献   

19.
The early thermal evolution of Moon has been numerically simulated to understand the magnitude of the impact-induced heating and the initially stored thermal energy of the accreting moonlets. The main objective of the present study was to understand the nature of processes leading to core–mantle differentiation and the production and cooling of the initial convective magma ocean. The accretion of Moon was commenced over a time scale of 100 yr after the giant impact event around 30–100 million years in the early solar system. We studied the dependence of the planetary processes on the impact scenarios, the initial average temperature of the accreting moonlets, and the size of the protomoon that accreted rapidly beyond the Roche limit within the initial 1 yr after the giant impact. The simulations indicate that the accreting moonlets should have a minimum initial averaged temperature around 1600 K. The impacts would provide additional thermal energy. The initial thermal state of the moonlets depends upon the environment prevailing within the Roche limit that experienced episodes of extensive vaporization and recondensation of silicates. The initial convective magma ocean of depth more than 1000 km is produced in the majority of simulations along with the global core–mantle differentiation in case the melt percolation of the molten metal through porous flow from bulk silicates was not the major mode of core–mantle differentiation. The possibility of shallow magma oceans cannot be ruled out in the presence of the porous flow. Our simulations indicate the core–mantle differentiation within the initial 102 to 103 yr of the Moon accretion. The majority of the convective magma ocean cooled down for crystallization within the initial 103 to 104 yr.  相似文献   

20.
Abstract— –Sayh al Uhaymir (SaU) 169 is a composite lunar meteorite from Oman that consists of polymict regolith breccia (8.44 ppm Th), adhering to impact‐melt breccia (IMB; 32.7 ppm Th). In this contribution we consider the regolith breccia portion of SaU 169, and demonstrate that it is composed of two generations representing two formation stages, labeled II and III. The regolith breccia also contains the following clasts: Ti‐poor to Ti‐rich basalts, gabbros to granulites, and incorporated regolith breccias. The average SaU 169 regolith breccia bulk composition lies within the range of Apollo 12 and 14 soil and regolith breccias, with the closest correspondence being with that of Apollo 14, but Sc contents indicate a higher portion of mare basalts. This is supported by relations between Sm‐Al2O3, FeO‐Cr2O3‐TiO2, Sm/Eu and Th‐K2O. The composition can best be modeled as a mixture of high‐K KREEP, mare basalt and norite/troctolite, consistent with the rareness of anorthositic rocks. The largest KREEP breccia clast in the regolith is identical in its chemical composition and total REE content to the incompatible trace‐element (ITE)‐ rich high‐K KREEP rocks of the Apollo 14 landing site, pointing to a similar source. In contrast to Apollo 14 soil, SaU 169 IMB and SaU 169 KREEP breccia clast, the SaU 169 regolith is not depleted in K/Th, indicating a low contribution of high‐Th IMB such as the SaU 169 main lithology in the regolith. The data presented here indicate the SaU 169 regolith breccia is from the lunar front side, and has a strong Procellarum KREEP Terrane signature.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号