首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 811 毫秒
1.
At the Dänischer Wohld Peninsula coastal sections (North West Germany), subglacial deformation was found at three scales. At the smallest scale, features typical of deforming bed tills were found, i.e. small boudins, tectonic laminations and low fabric strength till. At an intermediate scale, large lenses of glaciolacustrine sediments were found within subglacially deformed till. At the largest scale, there were large (over 5 m high) subglacial folds. We suggest that these styles of sedimentation/deformation were associated with a series of readvances during overall glacial retreat: subglacial deformation occurred during each advance and glaciolacus trine sedimentation occurred during each retreat. This led to glaciolacustrine sediments and deforming bed tills being folded together during subsequent readvances. Where the rheology was relatively weak, the lacustrine sediments were totally incorporated into the diamicton and lost their previous identity. However, where the glaciolacustrine sediments were relatively strong, they survived. We suggest that this style of deformation is typical of the conditions just upglacier from the ice margin and is associated with a relatively thick deforming layer and a high input of subglacial sediment. We conclude that the evidence found at this site provides further indications that the southern margins of the Fenno-Scandinavian ice sheet were coupled with the glacier bed and underwent deforming bed conditions.  相似文献   

2.
In central and northern Sweden, glacial sediments and landforms, formed during Early and Middle Weichselian stadials and their transition into interstadials, are often preserved in spite of having been overridden by later glacial advances. This study presents an OSL‐dated glacial stratigraphy from Idre in west‐central Sweden, expanding the area in which Middle Weichselian ice‐free conditions have been identified. Three sedimentary units were identified, with the lowermost unit consisting of glaciolacustrine sand, deposited in a stagnant water‐body. Nine OSL samples gave ages ranging from 54 to 41 ka, suggesting deposition during a deglacial phase in MIS 3. Normal faults and silt veins, formed after deposition, indicate that the area was ice‐free for a prolonged period, enabling the melting of buried stagnant ice. Above an erosional unconformity is a sediment unit characterized by gravels and sands deposited in a proximal braided‐river environment. OSL ages range from 180 to 41 ka, indicating poor sediment bleaching during deposition. We thus consider them to give a maximum age of the sedimentation, indicating deposition at or after 41 ka. The uppermost unit consists of a stacked succession of subglacial traction tills and glaciotectonite beds, representing the Late Weichselian glaciation of the area, probably during the inception phase with a wet‐based glacier regime. At the last deglaciation of the area there was extensive meltwater erosion, eroding all sedimentary units and forming a landscape with terraces and channels, and erosional remnants of the uppermost diamict as free‐standing hummocks.  相似文献   

3.
Swift, D. A., Sanderson, D. C. W., Nienow, P. W., Bingham, R. G. & Cochrane, I. C. 2010: Anomalous luminescence of subglacial sediment at Haut Glacier d'Arolla, Switzerland – a consequence of resetting at the glacier bed? Boreas, Vol. 40, pp. 446–458. 10.1111/j.1502‐3885.2010.00196.x. ISSN 0300‐9483. Luminescence has the potential to elucidate glacial geomorphic processes because primary glacial sediment sources and transport pathways are associated with contrasting degrees of exposure to light. Most notably, sediment entrained from extraglacial sources should be at least partially reset, whereas sediment produced by glacial erosion of subglacial bedrock should retain substantial luminescence commensurate with a geological irradiation history. We set out to test the validity of this assumption at Haut Glacier d'Arolla, Switzerland using sediment sampled extraglacially and from the glacier bed. Contrary to our expectations, the subglacial samples exhibited natural signals that were substantially lower than those of other sample groups, and further (albeit limited) analyses have indicated no obvious differences in sample‐group luminescence characteristics or behaviour that could account for this observation. For glaciological reasons, we can eliminate the possibilities that the subglacial sediment has been extraglacially reset or exposed in situ to heat or light. We therefore advocate investigation of possible resetting processes related to subglacial crushing and grinding, and speculate that such processes, if more generally present, may enable the dating of subglacially deposited tills using luminescence‐based techniques.  相似文献   

4.
The glacier Sefstrombreen in Spitsbergen surged across an arm of the sea between 1882 and 1886 and rode up onto the island Coraholmen. Marine and terrestrial geological observations and archive records show that the glacier advanced on a deforming carpet of marine mud which was eroded from its original location, transported, and smeared over the sea bed and Coraholmen as a deformation till. The glacier emplaced about 2108M3 (0.2 km3) of drift in the terminal 2 km of its advance in a maximum of 14 years, leaving a thickness of up to 20 m on Coraholmen, which was doubled in size as a result.During the surge, subglacial muds were characterised by high water pressures, low effective pressures and low frictional resistance to glacier movement. Original sedimentary inhomogenities permit fold structures to be identified, but repeated refolding and progressive remoulding produce mixing and homogenisation of deformation tills.The surge was probably shortlived, and as the heavily crevassed glacier stagnated, underlying water saturated muds were intruded into crevasses and then extruded on the glacier surface. Reticulate “crevasse-intrusion” ridges on Coraholmen and the sea floor reflect the orientation of surge generated crevasses. Water and sediment was also extruded beyond the glacier at its maximum extent, to form extensive flows producing “till tongues” both on Coraholmen and the sea floor extending over 1.3 km from the glacier.It is argued that subglacial deformation of pre-existing sediment will almost invariably be associated with glaciation of marine areas and that this process will not only produce deformation tills through remoulding of pre-existing sediments, but will also play a fundamental role in glacier dynamics. Criteria which permit glacial tills produced by such events from marine and glaciomarine muds are discussed.  相似文献   

5.
Structural, stratigraphic, and lithologic data from a section 69 m long of Catfish Creek drift (north shore of Lake Erie) tell a complex story of two competing glacial lobes. Stone surface features and orientations indicate that stones rotated in viscously deforming, fine-medium textured subglacial till prior to final emplacement. Fractures, shears, and attenuated sediment lenses in tills reveal that they experienced some brittle shear superposed on ductile shear during till dewatering and stiffening. The Huron-Georgian Bay lobe advanced first from the northwest, deforming interstadial sediments and depositing subglacial till. Next, southward confluent flow of the Huron, Georgian Bay, and Erie lobes carved subglacial troughs into sediments and deposited (then deformed) bouldery deformation till by squeeze flow. The northwest flowing Erie lobe then prevailed, depositing deformation till, subglacial aquatic sediments, and mudflows. Finally, a pavement-bearing, hybrid deformation-lodgement till covered the section. Till formation was mainly by subglacial viscous flow with minor lodgement superposed as water content decreased and some fines were probably winnowed. This implies that till deformation probably accounted for much of the glacier movement. Therefore, rapid ice flow could have occurred over the section, along the southern margin of the Laurentide Ice Sheet.  相似文献   

6.
JANE K. HART 《Sedimentology》2006,53(1):125-146
The subglacial processes at Briksdalsbreen, Norway, are examined by a combination of sedimentology, thin section and scanning electron microscope (SEM) analysis of till samples from an exposed subglacial surface and from beneath the glacier. Studies of a fluted surface indicate that subglacial deformation is occurring on a field scale with flutes forming behind most clasts 0·6 m high. At the thin section scale (0·014–2·0 mm) it is seen that deformation is by rotation and attenuation and is dependent on till texture. At the SEM scale (0·1–0·4 mm) it is seen that erosion is controlled by abrasion and percussion which produces distinct grain ‘styles’ as part of an erosional continuum. Overall it is shown that rotation and attenuation is a dominant process at all scales and that the clast interactions associated with different scale perturbations within the shear zone control erosion and deposition, as well as landform and fabric production.  相似文献   

7.
This is a study of Late Devensian drumlins formed in southern Anglesey and Arvon, northwest Wales. This area was affected by ice sheet coalescence when the Welsh ice sheet met with the lrish Sea ice sheet, and drumlins were formed once the two had coalesced. It is suggested that the drumlins were the result of net subglacial soft-bed erosion, and that they represent more resistant cores within the subglacial deforming layer. The drumlins have either gravel or till cores, and where the core was deformable, large-scale compressive glaciotectonic structures were seen (e.g. Dinas Dinlle) with local subglacial compression of –59%. Where the cores were more resistant (e.g. Lleiniog) these were not deformed but remained as more competent masses within the deforming layer. It is suggested that the less competent material flowed around the cores, some remaining as a thin carapace, but most of the material being removed down glacier, leaving the drumlins as erosional remnants. In northwest Wales there is a multi-till sequence that traditionally has been interpreted as having been deposited as the result of separate ice-sheet advances and retreats. However, in this study, it is suggested that the different tills were deposited as the result of ice-sheet coalescence, and that sites such as Dinas Dinlle do not show evidence of a major readvance in the retreat of the Devensian ice, but are indicative of continuously changing conditions within the subglacial deforming bed.  相似文献   

8.
希夏邦马峰东南富曲河谷的冰川沉积和冰川构造   总被引：2，自引：0，他引：2  
在希夏邦马峰（海拔８０１２ｍ）东南富曲河谷，中更新世以来有三次冰期；即聂拉木、富曲和普罗冰期。它们均可再分为两个亚阶段。聂拉木南的高冰碛平台长３.５ｍ，宽１.５ｋｍ，厚２００ｍ。属于中更新世聂拉木冰期（聂聂雄拉冰期）的巨大山谷冰川沉积，中尼公路从高冰碛平台尾端通过，形成数公里长的冰碛剖面，呈现出美丽多姿的冰川成因类型沉积和冰川构造现象，包括冰下，冰上融出碛，冰内.冰下河道沉积，冰湖沉积，坠碛，流磺等。冰川运动时造成的冰川构造，如断层、滑动面-…等也很清楚，代表了海洋型（暖冰川）冰川沉积和冰川构造特征，是中国目前研究冰川构造最理想的场所。  相似文献   

9.
The winter–spring transition is a dynamic time within the glacier system, because it marks a period of instability as the glacier undergoes a change in state from winter to summer. This period is normally associated with sudden pressure fluctuations resulting in hydrological instabilities within the subglacial drainage system. New data are presented from wireless multi-sensor subglacial probes incorporated within the till at Briksdalsbreen, Norway. Water pressure readings recorded a two-phase winter–spring transition. Event 1 occurred early in the year (December–January) and marked the start of activity within the subglacial environment following the winter. However, this did not result in any permanent changes in subglacial activity and was followed by a period of quiescence. Event 2 occurred later in the year in accordance with changing external weather conditions and the retreat of the snow pack. It was characterized by high-magnitude pressure peaks and diurnal oscillations in connected regions. The variations in sensor trends that followed this event suggested that a transition in the morphology of the subglacial drainage system had occurred in response to these pressure fluctuations. Event 2 also showed some similarities with spring events recorded at valley glaciers in the Alps. A conceptual model is presented associating the form of the winter–spring transition with respect to the location of the probes within connected and unconnected regions of the subglacial drainage system. These data provide further evidence for temporal and spatial heterogeneous subglacial drainage systems and processes. The identification and analysis of subglacial activity during the winter–spring transition can contribute to the interpretation of hydro-mechanical processes occurring within the subglacial environment and their effect on glacier dynamics.  相似文献   

10.
Understanding the processes that deposit till below modern glaciers provides fundamental information for interpreting ancient subglacial deposits. A process‐deposit‐landform model is developed for the till bed of Saskatchewan Glacier in the Canadian Rocky Mountains. The glacier is predominantly hard bedded in its upper reaches and flows through a deep valley carved into resistant Palaeozoic carbonates but the ice margin rests on a thick (<6 m) soft bed of silt‐rich deformation till that has been exposed as the glacier retreats from its Little Ice Age limit reached in 1854. In situ tree stumps rooted in a palaeosol under the till are dated between ca 2900 and 2700 yr bp and record initial glacier expansion during the Neoglacial. Sedimentological and stratigraphic observations underscore the importance of subglacial deformation of glaciofluvial outwash deposited in front of the advancing glacier and mixing with glaciolacustrine carbonate‐rich silt to form a soft bed. The exposed till plain has a rolling drumlinoid topography inherited from overridden end moraines and is corrugated by more than 400 longitudinal flute ridges which record deformation of the soft bed and fall into three genetically related types: those developed in propagating incipient cavities in the lee of large subglacial boulders embedded in deformation till, and those lacking any originating boulder and formed by pressing of wet till up into radial crevasses under stagnant ice. A third type consists of U‐shaped flutes akin to barchan dunes; these wrap around large boulders at the downglacier ends of longitudinal scours formed by the bulldozing of boulders by the ice front during brief winter readvances across soft till. Pervasive subglacial deformation during glacier expansion was probably facilitated by large boulders rotating within the soft bed (‘glacioturbation’).  相似文献   

11.
Western Lake Geneva (le Petit-Lac) was filled during the Quaternary over a major erosion surface truncating the cemented, folded and thrusted Tertiary sediments of the foreland Alpine basin. The carving of the lake occurred during Quaternary glaciations with ice originating from the Rhone valley catchment basin flowing in two branches oriented SW and NE over the Swiss Plateau. Lake Geneva is situated on the South-Western branch of this paleo ice-cap.For the first time, a dense grid of high-resolution seismic profiles (airgun 5-inch3, airgun 1-inch3 and echosounder) has imaged the whole Quaternary sequence, providing a paleoenvironmental interpretation and a detailed reconstruction of the Rhone glacier retreat stages during glacial events that led to the formation of western Lake Geneva.The Quaternary sequence filling up the bedrock valley is exceptionally thick with up to 220 m of deposits and consists of glacial, glacio-lacustrine and lacustrine sediments. Fourteen seismic units have been defined (units U1–U14). Unit U1 represents the remnants of glacial deposits older than the last glacial cycle, preserved in the deepest part of the lake and in secondary bedrock valleys. Unit U2 represents gravel and sands deposited by meltwater circulation at the bottom of the glacial valley. Unit U3 is a thick, stratified unit marking the beginning of the deglaciation, when the Rhone glacier became thinner and buoyant and allowed the formation of a subglacial lake. Younger glacial units (units U4, U5, U7, U9, U11) are acoustically chaotic sediments deposited subglacially under the water table (undermelt tills), while the glacier was thinning. These glacial units are bounded by synform erosion surfaces corresponding to readvances of the glacier.The transition from a glacial to a glacio-lacustrine environment started with the appearance of a marginal esker-fan system (unit U6). Esker formation was followed by a small advance–retreat cycle leading to the deposition of unit U7. Then, the ice front receded and stratified sediments were deposited in a glacio-lacustrine environment (units U8, U10 and U12). This retreat was punctuated by two readvances – Coppet (unit U9) and Nyon (unit U11) – producing large push moraines and proglacial debris flows. Finally, a lacustrine environment with a characteristic lake current pattern and mass movement deposits took place (units U13 and U14).Except for unit U1, the sedimentary sequence records the Würmian deglaciation in a fjord-like environment occupied by a tidewater glacier with a steep, calving ice front. The presence of an esker-fan system reveals the importance of subglacial meltwater flow in continental deglaciation. Push-moraines and erosion surfaces below the glacier indicate at least 5 readvances during the deglaciation thus revealing that oscillations of ice front are the key process in deglaciation of perialpine fjord-lakes. The dating of these continental glacier fluctuations would allow correlation with oceanic and ice records and help to understand the climatic mechanisms between oceans and continents.  相似文献   

12.
Streamlined subglacial landforms that include drumlins in three study areas, the upper Chandra valley around Chandra Tal, the upper Spiti Valley and the middle Yunam Valley of the NW Himalaya of India were mapped and studied using geomorphic, sedimentological and geochronological methods. These streamlined subglacial landforms include a variety of morphological types, including: (i) half egg‐shaped forms; (ii) complex superimposed forms; (iii) dome‐shaped forms; (iv) inverse forms; and (v) flat‐topped symmetrical forms. Sedimentological data indicate that subglacial deformational processes are responsible for the formation of the streamlined subglacial landforms in the Chandra Tal and upper Spiti Valley study areas. In contrast, streamlined landforms in the middle Yunam Valley are the result of melt‐out and subglacial erosional processes. In the Yunam Valley study area, 11 new cosmogenic 10Be surface exposure ages were obtained for boulders inset into the crests of streamlined subglacial landforms and moraines, and also for a bedrock surface. The streamlined landforms date to 8–7 ka, providing evidence of an early Holocene valley glaciation, and older moraines date to ～17–15 and 79–52 ka, representing other significant valley glacial advances in the middle Yunam Valley. The subglacial landforms in the Chandra Valley provide evidence for a ≥300‐m‐thick Lateglacial glacier that advanced southeast, overtopping the Kunzum Range, and advancing into the upper Spiti Valley. The streamlined subglacial landforms in these study areas of the NW Himalaya highlight the usefulness of such landforms in developing glacial chronostratigraphy and for understanding the dynamics of Himalayan glaciation.  相似文献   

13.
This study of tills from the Eastern Alps, Austria, illustrates the insights obtained using microsedimentology on subglacial tills in the context of palaeogeographical reconstructions of glacier advances. Investigations of several sites with tills derived from both local glaciers and the ice‐sheet streaming of the Inn Glacier during the Last Glacial Maximum and its termination reveal a detailed picture of subglacial sedimentology that provides evidence of soft sediment subglacial deformation under polythermal conditions. All the tills exhibit microstructures that are proxy evidence of significant changes in till rheology. The tills originate from multiple sources, incorporating older tills and other deposits picked up by the subglacial deformation within a polythermal but dominantly warm temperate subglacial thermal regime. The analyses of till microstructures reveal a direct relationship between basal ice strain conditions and their development. A hypothesis is derived, from the various microstructures observed in these Austrian tills formed under soft sediment deforming basal ice conditions, that suggests that with basal thermal changes and fluctuations in clay content, pore‐water content and pressure, microstructures form in a non‐random manner. It is postulated that in clay‐deficient sediments, edge‐to‐edge events are most likely to occur first; and where clay content increases, grain stacks, rotation structures, deformation bands and, finally, shear zones are likely to evolve in an approximate sequential manner. After repeated transport, emplacement, reworking and, probably, further shearing and deformation events, an emplaced ‘till’, as observed in these Austrian tills, will form that carries most, if not all of these microstructures, in varying percentages. Finally, the impact of the Inn Glacier Ice Stream on these tills is not easily detected and/or differentiated, but indications of high pore water and probable dilatant events leading to reductions in the number of edge‐to‐edge events point to the impact of fast or thick ice upon these subglacial tills.  相似文献   

14.
Subglacial and subaqueous sediments deposited near the margin of a Late-glacial ice-dammed lake near Achnasheen, northern Scotland, are described and interpreted. The subglacial sediments consist of deformation tills and glacitectonites derived from pre-existing glaciolacustrine deposits, and the subaqueous sediments consist of ice-proximal outwash and sediment flow deposits, and distal turbidites. Sediment was delivered from the glacier to the lake by two main processes: (1) subglacial till deformation, which fed debris flows at the grounding line; and (2) meltwater transport, which fed sediment-gravity flows on prograding outwash fans. Beyond the ice-marginal environment, deposition was from turbidity currents, ice-rafting and settling of suspended sediments. The exposures support the conclusion that the presence of a subglacial deforming layer can exert an important influence on sedimentation at the grounding lines of calving glaciers.  相似文献   

15.
The cumulative effect of repeated extensive glaciations represents a poorly constrained component in the understanding of landscape evolution in mid-latitude mountain ranges such as the Alps. Timing, extent, and paleo-climatic conditions of these glaciations are generally poorly understood due to the often-fragmentary character of terrestrial Quaternary records. In this context, the sedimentary infills of subglacial basins may serve as important archives to complement the Quaternary stratigraphy over several glacial–interglacial cycles. In this study, sedimentary facies, valley-fill architecture, and luminescence dating are used to describe nine erosional and depositional cycles (Formations A–I) in the Lower Glatt valley, northern Switzerland. These cycles can be related to the ‘Birrfeld’ Glaciation (~ MIS2), the ‘Beringen’ Glaciation (~ MIS6), and up to three earlier Middle Pleistocene glaciations that can be tentatively correlated to the regional glaciation history. Evidence suggests that deep bedrock trough incision and/or partial re-excavation last occurred mainly during the ‘Beringen’ and ‘Habsburg’ Glaciations. Second-order, ‘inlaid’ glacial basins document separate glacier re-advances during the Beringen Glaciation. The arrangement of subglacial basins in the Glatt valley with different sub-parallel or bifurcating bedrock troughs, re-excavated segments, and inlaid basins document changes in the magnitude and the spatial focus of subglacial erosion over time. The Glatt valley may thus serve as a key example for the glacial landscape evolution in many other repeatedly glaciated forelands.  相似文献   

16.
《Quaternary Science Reviews》2007,26(19-21):2354-2374
The glacial sediments of north Norfolk are a type site for subglacial deforming bed sediments. This investigation focussed on subglacial shear zone process at the field and thin section scale, in order to understand subglacial processes, as well as considering the implications for regional stratigraphies. The sandy and chalky tills from three sites (within 1 km) at Weybourne, Norfolk, showed evidence for subglacial deformation associated with simple shear, producing extension, compression and rotation. It was demonstrated how these processes interacted to cause chalk fragmentation and predictable fabric strengths (dependant on sorting and grain size). It is suggested that the ‘Marly Drift’ is a diachronous unit, and the resultant stratigraphy at Weybourne reflects one deformation till, resulting from a series of ice advances, but with a lithology derived from the local chalk bed rock (with some far travelled erratics), which have undergone different degrees of chalk fragmentation reflecting the nature and duration of the subglacial deformation.  相似文献   

17.
The efficiency of subglacial drainage is known to have a profound influence on subglacial deformation and glacier dynamics with, in particular, high meltwater contents and/or pressures aiding glacier motion. The complex sequence of Middle Pleistocene tills and glacial outwash sediments exposed along the north Norfolk coast (Eastern England) were deposited in the ice-marginal zone of the British Ice Sheet and contain widespread evidence for subglacial deformation during repeated phases of ice advance and retreat. During a phase of easterly directed ice advance, the glacial and pre-glacial sequences were pervasively deformed leading to the development of a thick unit of glacitectonic mélange. Although the role of pressurised meltwater has been recognised in facilitating deformation and mélange formation, this paper provides evidence for the subsequent development of a channelised subglacial drainage system beneath this part of the British Ice Sheet filled by a complex assemblage of sands, gravels and mass flow deposits. The channels are relatively undeformed when compared to the host mélange, forming elongate, lenticular to U-shaped, flat-topped bodies (up to 20–30 m thick) located within the upper part of this highly deformed unit. This relatively stable channelised system led to an increase in the efficiency of subglacial drainage from beneath the British Ice Sheet and the collapse of the subglacial shear zone, potentially slowing or even arresting the easterly directed advance of the ice sheet.  相似文献   

18.
The stratigraphy and sedimentology of the glacial deposits exposed along the coast of east Yorkshire are reviewed. Critical sections at Filey Brigg, Barmston and Skipsea are examined to reassess the stratigraphy of Devensian Dimlington Stadial glacial deposits in the light of recent developments in glacial sedimentology. Sedimentary and glaciotectonic structures studied in the field and by using scanning electron microscopy are emphasised. Two hypotheses are considered for the genesis of the interbedded diamictons and stratified sediments. The first involves the deposition of lodgement till and/or deformation till followed by meltout till, which was overridden to produce more deformation till, reflecting periods of ice stagnation punctuated by glacier thickening. The second hypothesis, which is favoured on the basis of field evidence and micromorphology, involves the vertical accretion of a deforming till layer associated with cavity/channel or tunnel valley fills, beneath active ice. At Barmston the upper part of the diamicton contains elongate pendant structures containing gravels, indicating that the diamicton was saturated and able to flow. The diamictons, therefore, represent a complex sequence of tills deposited and deformed by active ice during the Dimlington Stadial. Previously published stratigraphical schemes involving classifications of multiple tills in east Yorkshire should be simplified and it is more appropriate to assign these to a single formation, the Skipsea Till Formation. Rhythmic glaciolacustrine and proglacial glaciofluvial sediments overlie the tills at Barmston and Skipsea. These were deposited in sag basins during deglaciation as the tills settled and deformed under thickening sediment and as buried ice melted out. Extensive sands and gravels cap the succession and were deposited on a sandur during the later stages of deglaciation.  相似文献   

19.
Analysis of till micromorphology represents a relatively new technique that has been used most frequently to infer the importance of subglacial shear in till genesis. This study aims to calibrate the technique by comparing Pleistocene tills from United Kingdom with a modern till (the UpB till) from beneath Ice Stream B, West Antarctica. Despite the fact that all of the tills examined have been interpreted as deforming‐bed deposits, the modern till has significantly less abundant and diverse microstructures than those found in the Pleistocene tills. Seventeen examined thin‐sections of the UpB till contain recognisable microstructures over only 0–30% of individual thin‐section area. The most common microstructures are: (i) birefringent clay patterns that are interpreted as shear zones and (ii) adherent matrix structures, which we interpret as uncomminuted remnants of the parent glacial/glaciomarine diamictons. Fourteen thin‐sections of the Pleistocene tills were covered by microstructures in 10–95% of their area. The Pleistocene microstructures include birefringent clays and adherent matrix structures, as in the UpB till, but also laminations and deformed pods made of chalk and sorted sediments. We conclude that the same till‐forming process, i.e. subglacial deformation, may result in distinctly different till micromorphology. This is a consequence of the fact that microstructural characteristics are strongly influenced by factors other than shear deformation. We identify three controls that may be important for forming contrasting microstructural assemblages: (i) strain magnitude, (ii) the degree of heterogeneity of parent material, and (iii) relative importance of sediment sorting by flowing water in the subglacial environment. Thus till micromorphology is sensitive to multiple factors, which with proper calibration may enhance the existing capability to interpret past subglacial conditions from microstructures. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

20.
贡嘎山海螺沟冰川沉积特征与冰下过程研究   总被引：4，自引：3，他引：1  
贡嘎山海螺沟冰川是典型的海洋性冰川,粒度分析表明:冰下融出碛的细粒组分中粉砂占优势,压碎组分与磨碎组分界线在0.5 mm附近,说明其经历充分的研磨细化.与西藏枪勇冰川和天山乌鲁木齐河源冰川的矿物组成和化学成分对比,海螺沟冰川沉积物的经历的化学风化作用更强,即海洋性冰川冰下化学作用比大陆性冰川活跃.显微层理构造、正粒序层理和沉积透镜体反映海洋性冰川底部存在周期性沉积机制和明显的流水作用,显微滞碛是较常见的冰下融出碛类型.沉积物中显微褶皱和断层等反映海洋性冰川强烈滑动、剪切变形过程机制.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号