首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
It is noticed that few geophysical studies have been carried out to decipher the crustal structure of southwestern part of the Northeast India comprising of Tripura fold belt and Bengal basin as compared to the Shillong plateau and the Brahmaputra basin. This region has a long history of seismicity that is still continuing. We have determined first-order crustal features in terms of Moho depths (H) and average VP/VS ratios (κ) using H-κ stacking technique. The inversion of receiver functions data yields near surface thick sedimentary layer in the Bengal basin, which is nearly absent in the Shillong plateau and Tripura fold belt. Our result suggests that the crust is thicker (38–45 km) in the Tripura fold belt region with higher shear-wave velocity in the lower crust than the Shillong plateau. The distribution of VP/VS ratio indicates heterogeneity throughout the whole region. While low to medium value of Poisson’s ratio (1.69–1.75) indicates the presence of felsic crust in the Shillong plateau of the extended Indian Archean crust. The medium to high values of VP/VS ratio (> 1.780) in the Bengal basin and the Tripura fold belt region represent mafic crust during the formation of the Bengal delta and the Tripura fold belt creation in the Precambrian to the Permian age. The depth of the sediments in the Bengal basin is up to 8 km on its eastern margin, which get shallower toward its northeastern and southeastern margins.  相似文献   

2.
Inversion of local earthquake travel times and joint inversion of receiver functions and Rayleigh wave group velocity measurements were used to derive a simple model for the velocity crustal structure beneath the southern edge of the Central Alborz (Iran), including the seismically active area around the megacity of Tehran. The P and S travel times from 115 well-located earthquakes recorded by a dense local seismic network, operated from June to November 2006, were inverted to determine a 1D velocity model of the upper crust. The limited range of earthquake depths (between 2 km and 26 km) prevents us determining any velocity interfaces deeper than 25 km. The velocity of the lower crust and the depth of the Moho were found by joint inversion of receiver functions and Rayleigh wave group velocity data. The resulting P-wave velocity model comprises an upper crust with 3 km and 4 km thick sedimentary layers with P wave velocities (Vp) of ～5.4 and ～5.8 km s?1, respectively, above 9 km and 8 km thick layers of upper crystalline crust (Vp ～6.1 and ～6.25 km s?1 respectively). The lower crystalline crust is ～34 km thick (Vp ～ 6.40 km s?1). The total crustal thickness beneath this part of the Central Alborz is 58 ± 2 km.  相似文献   

3.
The North China Craton (NCC) is one of the oldest cratons on earth. Several important tectonic transformations of Mesozoic-Cenozoic tectonic regime led to the destruction of the North China craton. The knowledge of crustal structure can provide important constraints for the formation and evolution of cratons. New maps of sediment thickness, crustal thickness (H) and vP/vS (κ) in the central and western NCC were obtained using sequential H-κ stacking. P-wave receiver functions are calculated using teleseismic waveform data recorded by 405 stations from ChinArray project. Benefiting from the densely distribution of temporary seismic stations, our results reveal details of the crustal structure in the study area. The thickness of sedimentary layer in North China ranges from 0–6.4 km, and the thickest sedimentary layer is in Ordos block and its surroundings (about 2.8–6 km); The thickness of sedimentary layer in the Mongolia fold belt and Yinshan orogenic belt is relatively thin (less than 1 km). The crustal thickness of the study area varies between 27–48 km, of which the crust of the North China Plain is about 30–33 km, the central NCC is about 33–40 km, and the Ordos block is 40–48 km thick. The average vP/vS ratios in the study area is mostly between 1.66 and 1.90, and that in the Yanshan-Taihang mountain fold belt is between 1.70 and 1.85, and that in the Ordos block is between 1.65 and 1.90, with an average value of 1.77, indicating the absence of a thick basaltic lower crust. The obvious negative correlation between crustal thickness and average vP/vS ratio within Ordos and Central Asia orogenic belt may be related to magmatic underplating during the crustal formation. There is no significant correlation between the crustal thickness and the vP/vS ratio in the Lüliang-Taihang mountain fold belt, which may be related to the multiple geological processes such as underplating and crustal extension and thinning in this area. The lack of correlation between crust thickness and topography in the central orogenic belt and the North China Basin indicates the topography of these areas are controlled not only by crustal isostatic adjustment but also by the lithospheric mantle processes.  相似文献   

4.
Serpentinization of the mantle wedge is an important process that influences the seismic and mechanical properties in subduction zones. Seismic detection of serpentines relies on the knowledge of elastic properties of serpentinites, which thus far has not been possible in the absence of single-crystal elastic properties of antigorite. The elastic constants of antigorite, the dominant serpentine at high-pressure in subduction zones, were measured using Brillouin spectroscopy under ambient conditions. In addition, antigorite lattice preferred orientations (LPO) were determined using an electron back-scattering diffraction (EBSD) technique. Isotropic aggregate velocities are significantly lower than those of peridotites to allow seismic detection of serpentinites from tomography. The isotropic VP/VS ratio is 1.76 in the Voigt–Reuss–Hill average, not very different from that of 1.73 in peridotite, but may vary between 1.70 and 1.86 between the Voigt and Reuss bonds. Antigorite and deformed serpentinites have a very high seismic anisotropy and remarkably low velocities along particular directions. VP varies between 8.9 km s? 1 and 5.6 km s? 1 (46% anisotropy), and 8.3 km s? 1 and 5.8 km s? 1 (37%), and VS between 5.1 km s? 1 and 2.5 km s? 1 (66%), and 4.7 km s? 1 and 2.9 km s? 1 (50%) for the single-crystal and aggregate, respectively. The VP/VS ratio and shear wave splitting also vary with orientation between 1.2 and 3.4, and 1.3 and 2.8 for the single-crystal and aggregate, respectively. Thus deformed serpentinites can present seismic velocities similar to peridotites for wave propagation parallel to the foliation or lower than crustal rocks for wave propagation perpendicular to the foliation. These properties can be used to detect serpentinite, quantify the amount of serpentinization, and to discuss relationships between seismic anisotropy and deformation in the mantle wedge. Regions of high VP/VS ratios and extremely low velocities in the mantle wedge of subduction zones (down to about 6 and 3 km.s?1 for VP and VS, respectively) are difficult to explain without strong preferred orientation of serpentine. Local variations of anisotropy may result from kilometer-scale folding of serpentinites. Shear wave splittings up to 1–1.5 s can be explained with moderately thick (10–20 km) serpentinite bodies.  相似文献   

5.
We use 15 seismic stations,crossing the Qinling orogen(QO),Weihe graben(WG)and Ordos block(OB),to study the crustal structures by receiver functions(RFs)methods.The results show quite a difference in crustal structures and materials of three tectonic units(orogenic belt,extentional basin and stable craton).The average crustal thickness in the northern QO is 37.8 km,and Poisson ratio is 0.247,which indicates the increase of felsic materials in QO.In the southern OB,the average crustal thickness is 39.2 km and Poisson ratio is 0.265.Comparatively high value of Poisson ratio is related with old crystallized base in the lower crust and shallow sediments.The artificial RFs reveal that low-velocity and thick sediments have a significant effect on phases of the Mohorovi i discontinuity(Moho).As a result,the Moho phases in WG are tangled.S-wave velocity(VS)inversion shows that there are shallow sediment layers with 4–8 km’s thickness and high velocity zones in the middle-lower crust in WG.Complex Moho structure and high velocity zone may have been induced by the activities of the Weihe faults series.  相似文献   

6.
Two-dimensional crustal velocity models are derived from passive seismic observations for the Archean Karelian bedrock of north-eastern Finland. In addition, an updated Moho depth map is constructed by integrating the results of this study with previous data sets. The structural models image a typical three-layer Archean crust, with thickness varying between 40 and 52 km. P wave velocities within the 12–20 km thick upper crust range from 6.1 to 6.4 km/s. The relatively high velocities are related to layered mafic intrusive and volcanic rocks. The middle crust is a fairly homogeneous layer associated with velocities of 6.5–6.8 km/s. The boundary between middle and lower crust is located at depths between 28 and 38 km. The thickness of the lower crust increases from 5–15 km in the Archean part to 15–22 km in the Archean–Proterozoic transition zone. In the lower crust and uppermost mantle, P wave velocities vary between 6.9–7.3 km/s and 7.9–8.2 km/s. The average Vp/Vs ratio increases from 1.71 in the upper crust to 1.76 in the lower crust.The crust attains its maximum thickness in the south-east, where the Archean crust is both over- and underthrust by the Proterozoic crust. A crustal depression bulging out from that zone to the N–NE towards Kuusamo is linked to a collision between major Archean blocks. Further north, crustal thickening under the Salla and Kittilä greenstone belts is tentatively associated with a NW–SE-oriented collision zone or major shear zone. Elevated Moho beneath the Pudasjärvi block is primarily explained with rift-related extension and crustal thinning at ∼2.4–2.1 Ga.The new crustal velocity models and synthetic waveform modelling are used to outline the thickness of the seismogenic layer beneath the temporary Kuusamo seismic network. Lack of seismic activity within the mafic high-velocity body in the uppermost 8 km of crust and relative abundance of mid-crustal, i.e., 14–30 km deep earthquakes are characteristic features of the Kuusamo seismicity. The upper limit of seismicity is attributed to the excess of strong mafic material in the uppermost crust. Comparison with the rheological profiles of the lithosphere, calculated at nearby locations, indicates that the base of the seismogenic layer correlates best with the onset of brittle to ductile transition at about 30 km depth.We found no evidence on microearthquake activity in the lower crust beneath the Archean Karelian craton. However, a data set of relatively well-constrained events extracted from the regional earthquake catalogue implies a deeper cut-off depth for earthquakes in the Norrbotten tectonic province of northern Sweden.  相似文献   

7.
To better understand the relationship between crustal heterogeneity and seismotectonics in the National Capital Region (NCR), Delhi, India, we carried out local P- and S-velocity tomography beneath the NCR. First arrival times of the first P- and S-wave from 275 crustal earthquakes recorded by the Seismic Telemetry Network in and around Delhi of the India Meteorological Department, India, are inverted to obtain crustal P-, S-velocity and V P /V S variations in the region. Our tomographic images of the upper crust reflect well the surface geological and tectonic features. The Delhi fold belt is identified as low V P, high V S and low V P/V S. The Sohna hot spring region is appearing as low V P, low V S and high V P /V S correlating with the possible presence of fluid-filled rocks. The crustal seismicity is distributed in both the high- and low-velocity zones, but most distinctly in the low V P /V S region.  相似文献   

8.
The paper presents an analysis of the crust and upper mantle structure in the central Fennoscandian shield based on new P- and S-wave 2D velocity models of the BALTIC wide-angle reflection and refraction profiles. Using reprocessing of the old data, new P- and S-wave velocity models and V P /V S ratio distribution were developed. Moving from SW to NE, the thickness of the crust varies strongly, from ∼36 km to extremely thick, 58–64 km, crossing Wiborg rapakivi massif, Saimaa and Outokumpu areas, and Eastern Finland complex. Based on the lateral variations of V P , V P /V S and thickness of the crust, three main blocks of the crust and upper mantle were distinguished from SW to NE: southwestern, associated with Wiborg rapakivi massif; the central, having the highest thickness of the crust; and the northeastern, not well documented, with Archaean basement.  相似文献   

9.
Using the seismic records of 83 temporary and 17 permanent broadband seismic stations deployed in Tangshan earthquake region and its adjacent areas (39°N–41.5°N, 115.5°E–119.5°E), we conducted a nonlinear joint inversion of receiver functions and surface wave dispersion. We obtained some detailed information about the Tangshan earthquake region and its adjacent areas, including sedimentary thickness, Moho depth, and crustal and upper mantle S-wave velocity. Meanwhile, we also obtained the vP/vS structure along two sections across the Tangshan region. The results show that: (1) the Moho depth ranges from 30 km to 38 km, and it becomes shallower from Yanshan uplift area to North China basin; (2) the thickness of sedimentary layer ranges from 0 km to 3 km, and it thickens from Yanshan uplift region to North China basin; (3) the S-wave velocity structure shows that the velocity distribution of the upper crust has obvious correlation with the surface geological structure, while the velocity characteristics of the middle and lower crust are opposite to that of the upper crust. Compared with the upper crust, the heterogeneity of the middle and lower crust is more obvious; (4) the discontinuity of Moho on the two sides of Tangshan fault suggests that Tangshan fault cut the whole crust, and the low vS and high vP/vS beneath the Tangshan earthquake region may reflect the invasion of mantle thermal material through Tangshan fault.  相似文献   

10.
The late Triassic to early Tertiary Coast Mountains Batholith (CMB) of British Columbia provides an ideal locale to study the processes whereby accreted terranes and subduction-related melts interact to form stable continental crust of intermediate to felsic composition and complementary ultramafic residuals. Seismic measurements, combined with calculated elastic properties of various CMB rock compositions, provide a window into the deep-crustal lithologies that are key to understanding the processes of continental growth and evolution. We use a combination of seismic observations and petrologic modeling to construct hypothetical crustal sections at representative locations across the CMB, then test the viability of these sections via forward modeling with synthetic seismic data. The compositions that make up our petrologic forward models are based on calculations using the free energy minimization program Perple_X to predict mineral assemblages at depth for the bulk compositions of exposed plutonic rocks collected in the study area. Seismic data were collected along two transects in west-central British Columbia: a southern line that crossed the CMB near the town of Bella Coola (near 52° N), and a northern line centered on the towns of Terrace and Kitimat (near 54° N). Along both transects, seismic receiver functions reveal high Vp/Vs ratios near the Insular/Intermontane terrane boundary and crustal thickness increasing from 26 ± 3 km to 34 ± 3 km (at the 1 sigma certainty level) from west to east across the Coast Shear Zone (CSZ). On the southern line, we observe an anomalous region of complex receiver functions and diminished Moho signals beneath the central portion of the CMB. Our petrologic and seismic profiles show that observed seismic data from much of the CMB can be well-matched in terms of crustal thickness and structure, average Vp/Vs, and amplitude of the Moho converted phase, without including ultramafic residual material in the lower crust.  相似文献   

11.
The Tian Shan is a vast range that spans several countries in Asia. Understanding its evolutionary history may provide valuable insights into intracontinental orogenic dynamics. In this study, we explored the crustal characteristics of the Tian Shan and their relationships to the tectonic evolution of the region. A new H-stacking method that combines the P receiver function and gravity anomalies was used to estimate the thickness and ratio of P- to S-wave velocities (vP/vS) for 91 broadband seismic stations in the central and western Tian Shan. Our results revealed significant lateral variations in crustal thickness and vP/vS. A ~45-km-thick crust and an intermediate-high vP/vS (~1.74–1.84) were found in the Kazakh Shield and Tarim Basin, which we interpreted to indicate a mafic crystalline basement and lower crust. The central Tian Shan varied greatly in crustal thickness (40–64 km) and vP/vS ratio (1.65–2.00), which may be due to crustal shortening, mafic underplating, and crustal melting. In contrast, we observed a relatively thin crust (42–50 km) with an intermediate vP/vS ratio (~1.78) in the western Tian Shan. The differences in the crustal structures between the western and central Tian Shan imply that the Talas-Fergana Fault may be trans-lithospheric.  相似文献   

12.
Accurate determination of seismic velocity of the crust is important for understanding regional tectonics and crustal evolution of the Earth. We propose a stepwise joint linearized inversion method using surface wave dispersion, Rayleigh wave ZH ratio (i.e., ellipticity), and receiver function data to better resolve 1D crustal shear wave velocity (v S) structure. Surface wave dispersion and Rayleigh wave ZH ratio data are more sensitive to absolute variations of shear wave speed at depths, but their sensitivity kernels to shear wave speeds are different and complimentary. However, receiver function data are more sensitive to sharp velocity contrast (e.g., due to the existence of crustal interfaces) and v P/v S ratios. The stepwise inversion method takes advantages of the complementary sensitivities of each dataset to better constrain the v S model in the crust. We firstly invert surface wave dispersion and ZH ratio data to obtain a 1D smooth absolute v S model and then incorporate receiver function data in the joint inversion to obtain a finer v S model with better constraints on interface structures. Through synthetic tests, Monte Carlo error analyses, and application to real data, we demonstrate that the proposed joint inversion method can resolve robust crustal v S structures and with little initial model dependency.  相似文献   

13.
We analyzed receiver function of teleseismic events recorded at twelve Indonesian-GEOFON (IA-GE) broadband stations using nonlinear Neighbourhood Algorithm (NA) inversion and H-k stacking methods to estimate crustal thickness, V p /V s ratios and S-wave velocity structure along Sunda-Banda arc transition zone. We observed crustal thickness of 34–37 km in Timor Island, which is consistent with the previous works. The thick crust (> 30 km) is also found beneath Sumba and Flores Islands, which might be related to the arc-continent collision causing the thickened crust. In Timor and Sumba Islands, we observed high V p /V s ratio (> 1.84) with low velocity zone that might be associated with the presence of mafic and ultramafic materials and fluid filled fracture zone. The high V p /V s ratio observed at Sumbawa and Flores volcanic Islands might be an indication of partial melt related to the upwelling of hot asthenosphere material through the subducted slab.  相似文献   

14.
Crustal structure and the Moho depth are exceptionally well known beneath Europe. The first digital, high-resolution map of the Moho depth for the whole European Plate was compiled in 2007 and recently published in Geophysical Journal International. In the past few years, considerable developments have taken place in the receiver function techniques. Different receiver function techniques provide new, independent information, in particular on the S-wave velocity distribution in the crust and on the Moho depth. This gives an opportunity to compare the Moho depth from the Moho depth map of the European Plate (H MM) and the Moho depth from receiver function studies (H RF). Herein, we also compile and analyze the uncertainty of the crustal thickness determinations data obtained with receiver function analysis. The uncertainty is found to be ±2 km for 20-km-thick crust and about ±4 km for 60-km-thick crust. Comparison of the Moho depths shows an approximately linear trend between H RF and H MM. For the Moho depth of 30–40 km, the values are approximately equal, while for thin crust, H RF is about 5 km shallower than H MM, and for thick crust, it is about 5 km deeper than H MM. Possible reasons for this, the observed discrepancy between the Moho depths HMM and HRF, are discussed.  相似文献   

15.
Receiver function study in northern Sumatra and the Malaysian peninsula   总被引：1，自引：0，他引：1  
In this receiver function study, we investigate the structure of the crust beneath six seismic broadband stations close to the Sunda Arc formed by subduction of the Indo-Australian under the Sunda plate. We apply three different methods to analyse receiver functions at single stations. A recently developed algorithm determines absolute shear-wave velocities from observed frequency-dependent apparent incidence angles of P waves. Using waveform inversion of receiver functions and a modified Zhu and Kanamori algorithm, properties of discontinuities such as depth, velocity contrast, and sharpness are determined. The combination of the methods leads to robust results. The approach is validated by synthetic tests. Stations located on Malaysia show high-shear-wave velocities (V S) near the surface in the range of 3.4–3.6 km s − 1 attributed to crystalline rocks and 3.6–4.0 km s − 1 in the lower crust. Upper and lower crust are clearly separated, the Moho is found at normal depths of 30–34 km where it forms a sharp discontinuity at station KUM or a gradient at stations IPM and KOM. For stations close to the subduction zone (BSI, GSI and PSI) complexity within the crust is high. Near the surface low V S of 2.6–2.9 km s − 1 indicate sediment layers. High V S of 4.2 km s − 1 are found at depth greater than 6 and 2 km at BSI and PSI, respectively. There, the Moho is located at 37 and 40 km depth. At station GSI, situated closest to the trench, the subducting slab is imaged as a north-east dipping structure separated from the sediment layer by a 10 km wide gradient in V S between 10 and 20 km depth. Within the subducting slab V S ≈ 4.7 km s − 1. At station BSI, the subducting slab is found at depth between 90 and 110 km dipping 20° ± 8° in approximately N 60° E. A velocity increase in similar depth is indicated at station PSI, however no evidence for a dipping layer is found.  相似文献   

16.
S-wave velocity structure beneath the Ailaoshan-Red River fault was obtained from receiver functions by using teleseismic body wave records of broadband digital seismic stations. The average crustal thickness, Vp/Vs ratio and Poisson’s ratio were also estimated. The results indicate that the interface of crust and mantle beneath the Ailaoshan-Red River fault is not a sharp velocity discontinuity but a characteristic transition zone. The velocity increases relatively fast at the depth of Moho and then increases slowly in the uppermost mantle. The average crustal thickness across the fault is 36―37 km on the southwest side and 40―42 km on the northeast side, indicating that the fault cuts the crust. The relatively high Poisson’s ratio (0.26―0.28) of the crust implies a high content of mafic materials in the lower crust. Moreover, the lower crust with low velocity could be an ideal position for decoupling between the crust and upper mantle.  相似文献   

17.
We determined crustal structure along the latitude 30°N through the eastern Tibetan Plateau using a teleseismic receiver function analysis. The data came mostly from seismic stations deployed in eastern Tibet and western Sichuan region from 2004 to 2006. Crustal thickness and Vp/Vs ratio at each station were estimated by the H–k stacking method. On the profile, the mean crustal thickness and Vp/Vs ratio were found to be 62.3 km and 1.74 in the Lhasa block, 71.2 km and 1.79 near the Bangong–Nujiang suture, 66.3 km and 1.80 in the Qiangtang block, 59.8 km and 1.81 in the Songpan–Garze block, and 42.9 km and 1.76 in the Yangtze block, respectively. The estimated crustal thicknesses are consistent with predictions based on the topography and the Airy isostasy, except near the Bangong–Nujiang suture and in the Qiangtang block where the crust is 5–10 km thicker than predicted, indicating that the crust may be denser, possibly due to mafic underplating. We also inverted receiver functions for crustal velocity structure along the profile, which reveals a low S-wave velocity zone in the lower crust beneath the eastern Tibetan Plateau, although the extent of the low-velocity zone varies considerably. The low-velocity zone, together with previous results, suggests limited partial melting and localized crustal flow in the lower crust of the eastern Tibetan Plateau.  相似文献   

18.
Modeling of multimode surface wave group velocity dispersion data sampling the eastern and the western Ganga basins, reveals a three layer crust with an average Vs of 3.7 km s?1, draped by ～2.5 km foreland sediments. The Moho is at a depth of 43 ± 2 km and 41 ± 2 km beneath the eastern and the western Ganga basins respectively. Crustal Vp/Vs shows a felsic upper and middle crust beneath the eastern Ganga basin (1.70) compared to a more mafic western Ganga basin crust (1.77). Due to higher radiogenic heat production in felsic than mafic rocks, a lateral thermal heterogeneity will be present in the foreland basin crust. This heterogeneity had been previously observed in the north Indian Shield immediately south of the foreland basin and must also continue northward below the Himalaya. The high heat producing felsic crust, underthrust below the Himalayas could be an important cause for melting of midcrustal rocks and emplacement of leucogranites. This is a plausible explanation for abundance of leucogranites in the east-central Himalaya compared to the west. The uppermost mantle Vs is also significantly lower beneath the eastern Ganga basin (4.30 km s?1) compared to the west (4.44 km s?1).  相似文献   

19.
We performed a receiver function analysis on teleseismic data recorded along two dense seismic profiles and from 4 broadband regional seismic stations across the northeastern Tibetan plateau. The crustal thickness and vP/vS ratio were measured by the H-κ domain search algorithm. The Moho discontinuity across the Haiyuan arc fault zone was also revealed by common conversion point (CCP) imaging. Our study results show that the crustal thickness and the vP/vS ratio were 42–56 km and 1.60–1.88, respectively. The crustal thickening on the northeastern margin indicates that the crust is shortening or that there was a superimposition of crusts during the collision of the Tibetan plateau with Eurasian block. Our results suggest that Haiyuan fault likely resulted from the interactions of high temperature and pressure conditions during the collision of the Indian and Asian continents. The Moho beneath the Haiyuan tectonic region exhibits an obvious offset and a vague discontinuity according to CCP imaging. This study suggests that the Haiyuan arc fault zone is a trans-crustal fault that cuts through the Moho in the northeastern Tibetan Plateau. Moreover, there are indications of strong deformation in the intensive crustal extrusion from the interior of the Tibetan Plateau to its northeastern margin.  相似文献   

20.
The P receiver function includes P-to-SV converted phases and multiple reverberations of the discontinuities in the crust and mantle. The time of these phases is related to the crustal thickness and vP/vS ratio, and the amplitude of these phases is mainly controlled by the velocity and density contrast of interfaces. By using H-κ stacking method, this work estimated the crustal thickness and vP/vS ratio beneath the stations in the Guangdong province of South China. The velocity and density contrast (δβ-δρ) scanning stacking algorithm of the receiver function is applied to constrain the velocity and density contrast of the Moho in Guangdong province. This work analyzed the results of the crustal thickness, vP/vS ratio, and the velocity and density contrasts of Moho. The results indicate that the velocity contrast is higher beneath Yangjiang area in western Guangdong province and Nanao area in eastern Guangdong, which has a strong correlation with the distribution of geothermal springs in local areas and the characteristics of high heat flow. The velocity contrast of Moho has also a good correlation with the vP/vS ratio and the crustal thickness, which indicates that there is a strong material composition contrasts of the Moho in the study area. Velocity and density contrasts of Moho in some local area (such as western Guangdong) are somewhat consistent with the seismic activities.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号