首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Flow properties of turbidity currents in Bute Inlet, British Columbia   总被引：1，自引：0，他引：1  
Bute Inlet, a fiord along the southwestern coast of British Columbia, Canada, includes a sea-floor sedimentation system 70 km in length which resembles those developed on some large submarine fans. Turbidity currents originate at the head of the flord on the submerged delta fronts of the Homathko and Southgate rivers. They move downslope for about 30 km within a single large incised channel, spill onto a depositional area termed the channel lobe complex, and finally spread out over a low-relief distal splay area that passes 55 km downslope into a flat basin floor. During the present study, turbidity currents in Bute Inlet were studied using sea-floor morphology, bottom sediment distribution, and in-situ instrument packages. The mean velocities of the most recent flows, estimated from surface sediment grain size, has varied between 100–120 cm s–1 in the incised channel, 20–50 cms–1 in the channel lobe complex, and < 5 cm s–1 on the basin floor. Velocities based on channel morphology are poorly constrained but are in the range of 160-425 cm s–1 in the upper part of the incised channel and 66 cm s–1 in the lower channel. Calculated flow densities range from 1.049 to 1.028g cm–3. Turbidity flows monitored in 1986 using submerged instrument packages exceeded 32 m in thickness in the upper part of the incised channel, where the maximum measured velocity was 330 cm s–1. At the head of the channel lobe complex the maximum velocity had declined to 75 cm s–1. The density of the monitored flows is estimated at 1.025-1.03g cm–3. The cored sediments and channel morphology yield estimates of mean flow velocities that are generally greater than those measured by the in-situ instrument packages and estimated from modern surface sediments. The former suggest past flow velocities up to 500 cm s–1 in the incised channel, about 20 cm s–1 in spillover deposits along the lower part of the incised channel, and 100-140 cm s–1 in the distal splay. The contrast between the velocities of modern and past flows suggests that past flows may have been considerably larger and more energetic than those presently occurring in Bute Inlet. The size properties of sediments in the monitored turbidity flows suggest a strong vertical size gradient in the suspended load during transport. The surface and cored sediments fine downslope from the channel lobe complex to distal splay area. Distinctive sedimentary sequences are recognized in cores from the spillover lobes, channel lobe complex, distal splay, and basin floor depositional areas. Many individual turbidites grade downslope from massive Ta divisions in the channel lobe complex and probably in the incised channel to Ta divisions overlain by slurried divisions on the distal splay and largely slurried beds on the basin floor. These facies suggest that individual currents commonly evolve from largely cohesionless suspensions in the incised channel and channel lobe complex to dilute cohesive slurries downslope on the distal splay and basin floor. Many flows in Bute Inlet fail to develop a traction state of sedimentation and the resulting turbidites lack well-developed Tb. Tc, and Td divisions.  相似文献   

2.
Subaqueous liquefied and fluidized sediment flows and their deposits   总被引：3，自引：0，他引：3  
A clear distinction must be made between liquefied and fluidized systems. In liquefied beds and flows, the solids settle downward through the fluid, displacing it upward, whereas, in fluidized beds, the fluid moves upward through the solids, which are temporarily suspended without net downward movement. Many recent references to fluidized sediment gravity flows refer, in fact, to flows of liquefied debris. Most uniformly liquefied beds of well-sorted sand- or gravel-sized sediment will resediment as simple two-layer systems. Liquefied flows can originate either by liquefaction followed by failure, as in many retrogressive flow slides, or by failure followed by liquefaction, as in the case of some slumps. Empirical and theoretical estimates of flow velocity, thickness, and travel distance suggest that natural laminar liquefied flows of fine-grained sand will generally resediment after moving a kilometre or less. Laminar flows of coarse-grained sand will resediment after moving only a few metres. Grain dispersive pressure is thought to be of little significance in the development or maintenance of liquefied flows. Many surficial submarine sand beds are apparently susceptible to liquefaction, including submarine canyon and continental rise deposits. Within submarine canyons and narrow fjords, steep slopes and channels promote the evolution of liquefied flows from slumps by liquefaction after failure and of high density turbidity currents from liquefied flows by the development of turbulence. Upon moving into the lower parts of submarine canyons or into proximal fan channels, liquefied flows will resediment and high density turbidity currents will tend to decline to flows transitional between liquefied flows and turbidity currents. The liquefied, coarser detritus within such transitional flows will be deposited while finer-grained debris will remain in suspension and continue downslope as dilute turbidity currents. Resedimentation of the liquefied portions of such flows may be responsible for the deposition of the A-subdivision of many turbidites and many thick, structureless ‘proximal turbidites’ or ‘fluxoturbidites’. Similar units can originate by liquefaction of the traction deposits of normal turbidity currents. Fluidized flows are probably uncommon, thin, and, where formed, originate through fluidization of the fine-grained tops of liquefied graded beds.  相似文献   

3.
M. Felix 《Sedimentology》2002,49(3):397-419
A two‐dimensional numerical model is used to describe the flow structure of turbidity currents in a vertical plane. To test the accuracy of the model, it is applied to historical flows in Bute Inlet and the Grand Banks flow. The two‐dimensional spatial and temporal distributions of velocity and sediment concentration and non‐dimensionalized vertical profiles of velocity, turbulent kinetic energy and sediment concentration are discussed for several simple computational currents. The flows show a clear interaction between velocity, turbulence and sediment distribution. The results of the numerical tests show that flows with fine‐grained sediment have low vertical and high horizontal gradients of velocity and sediment concentration, show little increase in flow thickness and decelerate slowly. Steadiness and uniformity in these flows are comparable for velocity and concentration. In contrast, flows with coarse‐grained sediment have high vertical and low horizontal velocity gradients and high horizontal concentration gradients. These flows grow considerably in thickness and decelerate rapidly. Steadiness and uniformity in flows with coarse‐grained sediment are different for velocity and concentration. The results show the influence of spatial and temporal flow structure on flow duration and sediment transport.  相似文献   

4.
碎屑流与浊流的流体性质及沉积特征研究进展   总被引：5，自引：1，他引：4  
受浊流沉积模式(即鲍马序列和浊积扇模式)的驱动和浊积岩思维定势的影响,自1970s浊流与浊积岩的概念逐渐扩大,特别是通过"高密度浊流"术语的引入,以及将水下浊流与陆上河流的错误类比,使得一部分碎屑流与底流的沉积被认为是浊积岩。随着现代观测设备的应用以及详细的岩芯观察,碎屑流(特别是砂质碎屑流)和浊流被重新认识。浊流是一种具牛顿流变性质和紊乱状态的沉积物重力流,其沉积物支撑机制是湍流。碎屑流是一种具塑性流变性质和层流状态的沉积物重力流,其沉积物支撑机制主要是基质强度和颗粒间的摩擦强度。浊流沉积具特征的正粒序韵律结构,底部为突变接触而顶部为渐变接触;碎屑流沉积一般具上、下两层韵律结构,即下部发育具平行碎屑结构的层流段,上部发育具块状层理的"刚性"筏流段。但当碎屑流被周围流体整体稀释改造且改造不彻底时,强碎屑流可变为中—弱碎屑流,相应自下而上可形成逆—正粒序的沉积韵律结构,其中发育有呈漂浮状的石英颗粒和泥质撕裂屑等碎屑颗粒,明显区别于浊流沉积单一的正粒序韵律结构特征。碎屑流沉积顶、底部均为突变接触。浊流的沉积模式为简单的具平坦盆底的坡底模式,而碎屑流则为复杂的斜坡模式。  相似文献   

5.
The late Pleistocene and Holocene stratigraphy of Navy Fan is mapped in detail from more than 100 cores. Thirteen 14C dates of plant detritus and of organic-rich mud beds show that a marked change in sediment supply from sandy to muddy turbidites occurred between 9000 and 12,000 years ago. They also confirm the correlation of several individual depositional units. The sediment dispersal pattern is primarily controlled by basin configuration and fan morphology, particularly the geometry of distributary channels, which show abrupt 60° bends related to the Pleistocene history of lobe progradation. The Holocene turbidity currents are depositing on, and modifying only slightly, a relict Pleistocene morphology. The uppermost turbidite is a thin sand to mud bed on the upper-fan valley levées and on parts of the mid-fan. Most of its sediment volume is in a mud bed on the lower fan and basin plain downslope from a sharp bend in the mid-fan distributary system. Little sediment occurs farther downstream within this distributary system. It appears that most of the turbidity current overtopped the levée at the channel bend, a process referred to as flow stripping. The muddy upper part of the flow continued straight down to the basin plain. The residual more sandy base of the flow in the distributary channel was not thick enough to maintain itself as gradient decreased and the channel opened out on to the mid-fan lobe. Flow stripping may occur in any turbidity current that is thick relative to channel depth and that flows in a channel with sharp bends. Where thick sandy currents are stripped, levée and mid-fan erosion may occur, but the residual current in the channel will lose much of its power and deposit rapidly. In thick muddy currents, progressive overflow of mud will cause less declaration of the residual channelised current. Thus both size and sand-to-mud ratio of turbidity currents feeding a fan are important factors controlling morphologic features and depositional areas on fans. The size-frequency variation for different types of turbidity currents is estimated from the literature and related to the evolution of fan morphology.  相似文献   

6.
ABSTRACT The Moroccan Turbidite System (MTS) on the north‐west African margin extends 1500 km from the head of the Agadir Canyon to the Madeira Abyssal Plain, making it one of the longest turbidite systems in the world. The MTS consists of three interconnected deep‐water basins, the Seine Abyssal Plain (SAP), the Agadir Basin and the Madeira Abyssal Plain (MAP), connected by a network of distributary channels. Excellent core control has enabled individual turbidites to be correlated between all three basins, giving a detailed insight into the turbidite depositional architecture of a system with multiple source areas and complex morphology. Large‐volume (> 100 km3) turbidites, sourced from the Morocco Shelf, show a relatively simple architecture in the Madeira and Seine Abyssal Plains. Sandy bases form distinct lobes or wedges that thin rapidly away from the basin margin and are overlain by ponded basin‐wide muds. However, in the Agadir Basin, the turbidite fill is more complex owing to a combination of multiple source areas and large variations in turbidite volume. A single, very large turbidity current (200–300 km3 of sediment) deposited most of its sandy load within the Agadir Basin, but still had sufficient energy to carry most of the mud fraction 500 km further downslope to the MAP. Large turbidity currents (100–150 km3 of sediment) deposit most of their sand and mud fraction within the Agadir Basin, but also transport some of their load westwards to the MAP. Small turbidity currents (< 35 km3 of sediment) are wholly confined within the Agadir Basin, and their deposits pinch out on the basin floor. Turbidity currents flowing beyond the Agadir Basin pass through a large distributary channel system. Individual turbidites correlated across this channel system show major variations in the mineralogy of the sand fraction, whereas the geochemistry and micropalaeontology of the mud fraction remain very similar. This is interpreted as evidence for separation of the flow, with a sand‐rich, erosive, basal layer confined within the channel system, overlain by an unconfined layer of suspended mud. Large‐volume turbidites within the MTS were deposited at oxygen isotope stage boundaries, during periods of rapid sea‐level change and do not appear to be specifically connected to sea‐level lowstands or highstands. This contrasts with the classic fan model, which suggests that most turbidites are deposited during lowstands of sea level. In addition, the three largest turbidites on the MAP were deposited during the largest fluctuations in sea level, suggesting a link between the volume of sediment input and the magnitude of sea‐level change.  相似文献   

7.
鲍玛序列的多解性   总被引：1，自引：0，他引：1       下载免费PDF全文
鲍玛序列作为浊积岩的识别标志被广泛认可,但随着对深水沉积过程认识的深入,鲍玛序列逐渐被重新认识。近年来对深水沉积物重力流的研究发现:鲍玛序列不是浊流的唯一产物,深水环境中其它沉积过程也可形成鲍玛序列。因此,在野外识别浊积岩的过程中,要慎重使用鲍玛序列进行判别。  相似文献   

8.
Triassic calciturbidites were studied in a 100-m long core and nearby outcrops of the basinal Buchenstein Formation to determine composition and thickness variations. The quantity of recognized turbidite sediment relative to background sediment changes from 15% (by volume) in the lower part to 60% in the upper part, reflecting the steady progradation of nearby platforms. The composition of the sand fraction of 214 turbidites was point-counted in thin sections. Micrite peloids (average 23%) and lithoclasts (16%) are by far the most dominant constituents. They are interpreted as two different varieties of in-situ precipitated micrite (automicrite), which probably formed under the influence of microbes and constitute the principal building material of the adjacent platforms. Platform-derived skeletal grains amount to only 0.5%. Variations in turbidite composition were quantified using Spearman's rank correlation and cluster analysis. The most significant compositional variations seem to be related to hydrodynamic sorting in the turbidity currents and to the gradual shift from distal to more proximal turbidites in the core as the platforms prograded basinward. Cluster analysis of the 214 samples shows a major subdivision into micrite and sparite dominated turbidites. Clusters associated with micrite-dominated turbidites are enriched in Radiolaria and thin-shelled bivalves, whereas the clusters related to sparite-dominated turbidites show an abundance of lithoclasts. This subdivision seems strongly related to sorting effects in a turbidity current. Point-counting of turbidites in nearby outcrops revealed a lateral variation in composition. Proximal turbidites are sparite-dominated and enriched in lithoclasts, distal portions are chiefly micrite with an open-ocean biota (thin-shelled bivalves, Radiolaria). This differentiation resembles the vertical change in composition of thick turbidite beds, and is attributed to different settling rates of the various grains in the turbidity current. There is no indication that turbidite composition fluctuated significantly under the influence of sea-level fluctuations. This is not surprising because the dominant automicrite facies of the platforms only migrates laterally, but does not change much during sea-level cycles.  相似文献   

9.
Recognition of the occurrence and extent of hemipelagic and pelagic deposits in turbidite sequences is of considerable importance for environmental analysis (palaeodepth, circulation, distance from land, hemipelagic or pelagic versus turbidite sedimentation rates) of ancient basins. Differentiation between the finegrained parts (E-division) of turbidites and the (hemi-) pelagic layers (F-division of turbidite-pelagite alternations) is facilitated in basins where carbonate turbidites were deposited below the carbonate compensation depth (CCD) such as the Flysch Zone of the East Alps but may be difficult in other basins where less compositional contrast is developed between the fine-grained turbidites and hemipelagites. This difficulty pertains particularly in Palaeozoic and older basins. For Late Mesozoic-Cenozoic oceans with a relatively deep calcite compensation level three other types of turbidite basins may be distinguished for which differentiation becomes increasingly more difficult in the sequence from (1) to (3): (1) terrigenous turbidite basins above the CCD; (2) carbonate turbidite basins above the CCD; (3) terrigenous turbidite basins below the CCD. Criteria and methods useful for the differentiation between turbiditic and hemipelagic mudstone in the Upper Cretaceous of the Flysch Zone of the East Alps include calcium carbonate content, colour, sequential analysis, distribution of bioturbation, and microfaunal content. In modern turbidite basins clay mineral content, organic matter content, plant fragments, and grain-size (graded bedding, maximum grain diameter) have reportedly also been used as criteria (see Table 3). Deposition of muddy sediment by turbidity currents on weakly sloping sea bottoms such as the distal parts of deep-sea fans or abyssal plains is not only feasible but may lead to the accumulation of thick layers. Contrary to earlier speculation it can be explained by the hydrodynamic theory of turbidity currents, if temperature differences between the turbidity current and the ambient deep water as well as relatively high current velocities for the deposition of turbiditic muds (an order of magnitude higher on mud surfaces than commonly assumed) are taken into consideration. The former add to the capacity of turbidity currents to carry muddy sediment without creating a driving force on a low slope.  相似文献   

10.
Turbidity currents are turbulent, sediment‐laden gravity currents which can be generated in relatively shallow shelf settings and travel downslope before spreading out across deep‐water abyssal plains. Because of the natural stratification of the oceans and/or fresh water river inputs to the source area, the interstitial fluid within which the particles are suspended will often be less dense than the deep‐water ambient fluid. Consequently, a turbidity current may initially be denser than the ambient sea water and propagate as a ground‐hugging flow, but later reverse in buoyancy as its bulk density decreases through sedimentation to become lower than that of the ambient sea water. When this occurs, all or part of the turbidity current lofts to form a buoyant sediment‐laden cloud from which further deposition occurs. Deposition from such lofting turbidity currents, containing a mixture of fine and coarse sediment suspended in light interstitial fluid, is explored through analogue laboratory experiments complemented by theoretical analysis using a ‘box and cloud’ model. Particular attention is paid to the overall deposit geometry and to the distributions of fine and coarse material within the deposit. A range of beds can be deposited by bimodal lofting turbidity currents. Lofting may encourage the formation of tabular beds with a rapid pinch‐out rather than the gradually tapering beds more typical of waning turbidity currents. Lofting may also decouple the fates of the finer and coarser sediment: depending on the initial flow composition, the coarse fraction can be deposited prior to or during buoyancy reversal, while the fine fraction can be swept upwards and away by the lofting cloud. An important feature of the results is the non‐uniqueness of the deposit architecture: different initial current compositions can generate deposits with very similar bed profiles and grading characteristics, highlighting the difficulty of reconstructing the nature of the parent flow from field data. It is proposed that deposit emplacement by lofting turbidity currents is common in the geological record and may explain a range of features observed in deep‐water massive sands, thinly bedded turbidite sequences and linked debrites, depending on the parent flow and its subsequent development. For example, a lofting flow may lead to a well sorted, largely ungraded or weakly graded bed if the fines are transported away by the cloud. However, a poorly sorted, largely ungraded region may form if, during buoyancy reversal, high local concentrations and associated hindered settling effects develop at the base of the cloud.  相似文献   

11.
High-resolution seismic boomer profiles, with a vertical resolution of less than 1 m, together with piston cores and previous side-scan sonar data, are used to describe late Quaternary sedimentation on the Var deep-sea fan. Chronological control is provided by foram biostratigraphy and radiocarbon dating in cores, and is extended over the fan by seismic correlation. Regional erosional events correspond to the oxygen isotopic stage 2 and 6 glacial maxima. Cores and seismic data define a widespread surface sand layer that is correlated with prodelta failure in 1979 and subsequent submarine cable breaks. Numerical modelling constrains the character of this 1979 turbidity current. It originated from a relatively small slide on the upper prodelta that put sufficient material in suspension to form an accelerating turbidity current which eroded sand from the Var Canyon. The turbidity current was only 30 m thick on the Upper Valley, but experienced significant flow expansion in the Middle Valley to thicknesses of more than 120 m, where it spilled over the eastern Var Sedimentary Ridge at a velocity of about 2·5 m s?1. Other Holocene turbidity currents (with a recurrence interval of 1000 years) were somewhat muddier and thicker, but also deposited sand on the levees of the Middle Valley, and are inferred to have had a similar slide-related origin. Late Pleistocene turbidity currents deposited thick mud beds on the Var Sedimentary Ridge. The presence of sediment waves and the mean cross-flow slope inferred from levee asymmetry indicates that some of these flows were many hundreds of metres thick and flowed at velocities of about 0·35 m s?1. This contrast with Holocene turbidites suggests that a slide origin is unlikely. Estimated times for deposition of thick mud beds on the levees are many days to weeks. The Late Pleistocene flows may therefore result from hyperpycnal flow of glacial outwash in the Var River. The variation in the Late Pleistocene to Holocene turbidite sedimentation is controlled more by variations in sediment supply than by sea-level change.  相似文献   

12.
Most of the Quaternary sediments of the Mozambique Fan have been derived from Africa-Madagascar and deposited by turbidity currents in Pleistocene time. Currents caused by movement of the Antarctic Bottom Water also played a significant role in reworking and redepositing sediments along the marginal areas of the fan. The inner or upper Mozambique Fan is characterized by a single, leveed valley. Due to the effects of the Coriolis force, the natural levees to the east of the valley (left, looking downstream) are higher and contain more terrigenous sediments than those to the west of the valley. The sea floor to the west of the valley returns regular hyperbolic echoes as seen on 3·5 kHz echograms, whereas to the east of the valley, the sea floor is relatively smooth. The sediments on the valley floor are coarse-grained (with median grain up to 2 mm) and poorly sorted, and occur often as massive turbidites, interbedded with hemipelagic sediments. Away from the valley, both to the east and the west, the terrigenous sediments are relatively fine-grained and have been deposited as overbank turbidite sequences. We estimate the maximum velocities of the channelized turbidity currents in the upper fan to have been 8–32 ms?1. The middle fan has several distributary channels with no levees and has a relatively flat sea floor, characterized by lack of acoustic penetration. Thick, sheet-like, turbidite sand beds, deposited primarily by unchannelized turbidity currents, characterize the middle fan. The middle fan grades, towards the margins, into the outer (lower) fan which is relatively free of channels, has good acoustic penetration and contains hemipelagic and pelagic sediments, and thin, fine-sand turbidite and/or contourite beds. A wide zone of sediment waves, formed from the reworking of the turbidity current-fed sediments by the Antarctic Bottom Water, forms part of the outer fan.  相似文献   

13.
A series of individual turbidites, correlated over distances >100 km, are present in the recent fill of the Agadir Basin, offshore northwest Africa. The aim here is to unravel multiple turbidite source areas and flow pathways, and show how turbidite provenance studies contribute to interpretation of flow processes. Agadir Basin turbidites are sourced from four main areas, with the majority originating from the siliciclastic Morocco Shelf; their sand-mud distribution is strongly controlled by flow sediment volume, with relatively low-volume flows dying out within the Agadir Basin and large-volume flows bypassing significant sediment volumes to basins further downslope. Two large-volume volcaniclastic turbidites are attributed to a Canary Islands landslide source, while several small mud-dominated turbidites are interpreted to be locally sourced from hemipelagic-draped seamounts (e.g. Turbidite AB10). Finally, Turbidite AB1 (∼1 ka) is only present in the western Agadir Basin, and is linked to recent “re-activation” of the Sahara Slide headwall. The muddy suspension clouds of three large-volume flows, all linked to large-scale landslides, have covered huge areas of seafloor and flowed along or even slightly upslope for long distances. It is proposed that northeastwards-flowing bottom currents have aided transport of these dilute flow fractions into and across the Agadir Basin.  相似文献   

14.
MATRIX OF TURBIDITES: EXPERIMENTAL APPROACH   总被引：2，自引：0，他引：2  
The matrix (< 40 μ) of turbidites forms a possible clue to the density of turbidity currents and the origin of the graywacke matrix. Experiments in a circular flume provide a mechanism to study the relation between composition of suspensions at various speeds and their deposits. There is a close analogy to the lower part of turbidity currents. The lutum content of samples with median diameters greater than 400 or 500 μ is found to correspond to the suspended load of the pore water. The higher value for finer deposits can be recalculated to suspension concentration by use of the “sedimentation factor”. Hence, each turbidite carries, as it were, a sample of its depositing current. The lutum content depends not on the ratio of sand to lutum in the current, as tacitly assumed by many authors, but mainly on the ratio lutum to water, although also influenced by velocity. The average lutum density of coarser recent deep-sea sands is 1-2%. This indicates turbidity currents with 5-10% lutum by weight (density 1.03–1.07). The sand must be added to ascertain the current density. In first approximation turbidity currents tend to have densities at their nose of 1.1–1.2, but higher and much lower values also occur. The maximum original lutum percentage of coarse turbidites is below 10%. Higher values are very scarce and are due to post-depositional mixing, or we are dealing with slides. However, in fine-grained turbidites there is more matrix up to 20% for a median of 100 p. Hence, coarse graded marine graywackes with 20 or more per cent matrix are presumably weakly metamorphic turbidites, that originally held the same modest amount of lutum as recent turbidites of the same grain size. The Trask sorting of the experimental deposits is very good, like the average of natural turbidites. Most cumulative curves of turbidite grain-size analyses on arithmetic probability paper show a characteristic bend in fine sand or silt sizes.  相似文献   

15.
The early Holocene S-1 sapropelic sequence in the northwest Hellenic Trench has been studied in six piston cores from the Zakinthos and Strofadhes basins. The S-1 sequence, 0.7-3.5 m thick, consists principally of silt to mud turbidites, with rare, thick, disorganized, sandy turbidites. These lithofacies are described and compared with fine-grained turbidites from the literature. Petrographical data, including the abundance of organic carbon and planktonic microfossils, indicate that the principal source of sediment to the turbidites was from the continental slope. On the basis of composition and texture, five turbidite units can be correlated between the two basins. These basins are fed by separate but adjacent drainage systems. The apparently synchronous occurrence of turbidites in the two drainage systems suggests that the turbidity currents were seismically triggered. Some of the turbidites show poorly organized beds which may reflect the slump origin and the short (30 km) distances of travel. Turbidites were deposited more frequently in the S-1 sapropelic interval than in the over- and underlying sediments. Application of slope stability analysis shows that on the 8° slopes above the basins, a 10-cm-thick sapropel would have a factor of safety of about 2, and would fail with earthquake accelerations in excess of 0.08 g. The frequency of earthquakes likely to produce such accelerations is similar to the observed frequency of turbidites. The low strength of the sapropelic sediment makes it particularly susceptible to such failure. Similar thin-skinned slumping may be an important process for the initiation of turbidity currents in other environments where there are steep slopes or high sedimentation rates.  相似文献   

16.
Sediment waves are commonly observed on the sea floor and often vary in morphology and geometry according to factors such as seabed slope, density and discharge of turbidity currents, and the presence of persistent contour currents. This paper documents the morphology, internal geometry and distribution of deep‐water (4000 to 5000 m) bedforms observed on the sea floor offshore eastern Canada using high‐resolution multibeam bathymetry data and seismic stratigraphy. The bedforms have wavelengths of >1 km but fundamentally vary in terms of morphology and internal stratigraphy, and are distinguished into three main types. The first type, characterized by their long‐wavelength crescentic shape, is interpreted as net‐erosional cyclic steps. These cyclic steps were formed by turbidity currents flowing through canyons and overtopping and breaching levées. The second type, characterized by their linear shape and presence on levées, is interpreted as net‐depositional cyclic steps. These upslope migrating bedforms are strongly aggradational, indicating high sediment deposition from turbidity currents. The third type, characterized by their obliqueness to canyons, is observed on an open slope and is interpreted as antidunes. These antidunes were formed by the deflection of the upper dilute, low‐density parts of turbidity currents by contour currents. The modelling of the behaviour of these different types of turbidity currents reveals that fast‐flowing flows form cyclic steps while their upper parts overspill and are entrained westward by contour currents. The interaction between turbidity currents and contour currents results in flow thickening and reduced sediment concentration, which leads to lower flow velocities. Lower velocities, in turn, allow the formation of antidunes instead of cyclic steps because the densiometric Froude number (Fr′) decreases. Therefore, this study shows that both net‐erosional and net‐depositional cyclic steps are distributed along channels where turbidity currents prevail whereas antidunes form on open slopes, in a mixed turbidite/contourite system. This study provides insights into the influence of turbidity currents versus contour currents on the morphology, geometry and distribution of bedforms in a mixed turbidite–contourite system.  相似文献   

17.
Escanaba Trough is the southernmost segment of the Gorda Ridge and is filled by sandy turbidites locally exceeding 500 m in thickness. New results from Ocean Drilling Program (ODP) Sites 1037 and 1038 that include accelerator mass spectrometry (AMS) 14C dates and revised petrographic evaluation of the sediment provenance, combined with high-resolution seismic-reflection profiles, provide a lithostratigraphic framework for the turbidite deposits. Three fining-upward units of sandy turbidites from the upper 365 m at ODP Site 1037 can be correlated with sediment recovered at ODP Site 1038 and Deep Sea Drilling Program (DSDP) Site 35. Six AMS 14C ages in the upper 317 m of the sequence at Site 1037 indicate that average deposition rates exceeded 10 m/k.yr. between 32 and 11 ka, with nearly instantaneous deposition of one approximately 60-m interval of sand. Petrography of the sand beds is consistent with a Columbia River source for the entire sedimentary sequence in Escanaba Trough. High-resolution acoustic stratigraphy shows that the turbidites in the upper 60 m at Site 1037 provide a characteristic sequence of key reflectors that occurs across the floor of the entire Escanaba Trough. Recent mapping of turbidite systems in the northeast Pacific Ocean suggests that the turbidity currents reached the Escanaba Trough along an 1100-km-long pathway from the Columbia River to the west flank of the Gorda Ridge. The age of the upper fining-upward unit of sandy turbidites appears to correspond to the latest Wisconsinan outburst of glacial Lake Missoula. Many of the outbursts, or j?kulhlaups, from the glacial lakes probably continued flowing as hyperpycnally generated turbidity currents on entering the sea at the mouth of the Columbia River.  相似文献   

18.
The dynamic interpretation of most current-structure sequences derives directly from experiments on the succession of bedforms produced by flows in flumes. The results of these and related studies have been used to construct stability field diagrams in which the fields of individual bedforms are usually expressed as a function of flow intensity (power, velocity, bed shear stress, etc.) and grain size. The data underlying existing stability-field diagrams were collected largely from the study of flows carrying coarse-grained sediment entrained through particle-by-particle bed erosion. Many flows, however, do not entrain sediment through simple bed erosion. Most turbidity currents originate by the development of turbulence in slumps, slides, and other slope failures. Such flows generally form with highly concentrated suspended loads and their bed-load layers derive sediment from the collapsing suspended-sediment clouds. Because the collapse properties of such clouds may be related as much to suspended particle concentration, size distribution, particle interactions, and other factors as to flow intensity, the stability fields of bedforms developed beneath such flows may differ in flow intensity-grain-size relationships from those beneath flows deriving sediment from bed erosion alone. Useful stability-field diagrams for turbidity currents must include suspended-load fallout rate as a third variable, independent of flow intensity and mean grain size. A preliminary stability-field diagram of this type indicates that Bouma Tabc sequences may theoretically form with essentially no velocity variation of the attendant flow. This type of analysis may have considerable relevance to the interpretation not only of turbidites but also of other deposits formed where bed-load layers are fed from above rather than below. These include shallow-shelf storm units deposited from highly concentrated flows and volcaniclastic layers formed where pyroclastic debris falls directly into moving water.  相似文献   

19.
A computer-based numerical model of turbidity current flow and sedimentation is presented that integrates geological observations with basic equations for fluid and sediment motion. The model quantifies those aspects of turbidity currents that make them different from better-understood fluvial processes, including water mixing across the upper flow boundary and the interactions between the suspended-sediment concentration and the flow dynamics and sedimentation. The model includes three numerical components: (1) a layer-averaged three-equation flow model for tracing downslope flow evolution using continuity and momentum equations, (2) a sedimentation/fluidization model for tracing sediment-size fractionation in sedimenting multicomponent suspensions and (3) a concentration-viscosity model for quantifying the changes in resistance of such suspensions toward fluid and sediment motion. The model traces the evolution of a model turbidity current in terms the layer-averaged flow velocity, flow thickness, sediment concentration distribution, and the rate of sedimentation and sediment size fractionation. It generates synthetic turbidites with downslope variations in thickness and grain-size structuring at each point along the flow path. This study represents an effort to evaluate quantitatively the effects of basin geometry, sediment supply and sediment properties on the mechanics of turbidity current flow and sedimentation and on the geometry and grain size characteristics of the resulting deposits.  相似文献   

20.
Turbidity currents in the ocean are driven by suspended sediment. Yet results from surveys of the modern sea floor and turbidite outcrops indicate that they are capable of transporting as bedload and depositing particles as coarse as cobble sizes. While bedload cannot drive turbidity currents, it can strongly influence the nature of the deposits they emplace. This paper reports on the first set of experiments which focus on bedload transport of granular material by density underflows. These underflows include saline density flows, hybrid saline/turbidity currents and a pure turbidity current. The use of dissolved salt is a surrogate for suspended mud which is so fine that it does not settle out readily. Thus, all the currents can be considered to be model turbidity currents. The data cover four bed conditions: plane bed, dunes, upstream‐migrating antidunes and downstream‐migrating antidunes. The bedload transport relation obtained from the data is very similar to those obtained for open‐channel flows and, in fact, is fitted well by an existing relation determined for open‐channel flows. In the case of dunes and downstream‐migrating antidunes, for which flow separation on the lee sides was observed, form drag falls in a range that is similar to that due to dunes in sand‐bed rivers. This form drag can be removed from the total bed shear stress using an existing relation developed for rivers. Once this form drag is subtracted, the bedload data for these cases collapse to follow the same relation as for plane beds and upstream‐migrating antidunes, for which no flow separation was observed. A relation for flow resistance developed for open‐channel flows agrees well with the data when adapted to density underflows. Comparison of the data with a regime diagram for field‐scale sand‐bed rivers at bankfull flow and field‐scale measurements of turbidity currents at Monterey Submarine Canyon, together with Shields number and densimetric Froude number similarity analyses, provide strong evidence that the experimental relations apply at field scale as well.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号