首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 421 毫秒
1.
Abstract— The Lockne and Tvären craters formed about 455 million years ago in an epicontinental sea where seawater and mainly limestones covered a crystalline basement. The target water depth for Tvären (apparent basement crater diameter D = 2 km) was probably not over 150 m, and for Lockne (D = 7.5 km) recent best‐fit numerical simulations suggest the target water depth of 500–700 m. Lockne has crystalline ejecta that partly cover an outer crater (14 km diameter) apparent in the target sediments. Tvären is eroded with only the crater infill preserved. We have line‐logged cores through the resurge deposits within the craters in order to analyze the resurge flow. The focus was clast lithology, frequencies, and size sorting. We divide the resurge into “resurge proper,” with water and debris shooting into the crater and ultimately rising into a central water plume, “anti‐resurge,” with flow outward from the collapsing plume, and “oscillating resurge” (not covered by the line‐logging due to methodological reasons), with decreasing flow in diverse directions. At Lockne, the deposit of the resurge proper is coarse and moderately sorted, whereas the anti‐resurge deposit is fining upwards and better sorted. The Tvären crater has a smoothly fining‐up section deposited by the resurge proper and may lack anti‐resurge deposits. At Lockne, the content of crystalline relative to limestone clasts generally decreases upwards, which is the opposite of Tvären. This may be a consequence of factors such as crater size (i.e., complex versus simple) and the relative target water depth. The mean grain size (i.e., the mean ‐phi value per meter, ø) and standard deviation, i.e., size sorting (s?) for both craters, can be expressed by the equation s? = 0.60ø ? 1.25.  相似文献   

2.
Abstract— The Lockne and Tvären craters formed in the Late Ordovician Baltoscandian epicontinental sea. Both craters demonstrate similarities concerning near‐synchronous age, target seabed, and succeeding resurge deposits; however, the water depths at the impact sites and the sizes of the craters were not alike. The post‐impact sedimentary succession of carbonates, i.e., the Dalby Limestone, deposited on top of the resurge sediments in the two craters, is nevertheless similar. At least three main facies of the Dalby Limestone were established in the Lockne crater, depending on sea‐floor topography, location with respect to the crater, and local water currents. The dominating nodular argillaceous facies, showing low values of inorganic carbon (IC), was distributed foremost in the deeper and quiet areas of the crater floor and depressions. At the crater rim, consisting of crushed crystalline basement ejecta, a rim facies with a reef‐like fauna was established, most certainly due to topographical highs and substrate‐derived nutrients. Between these facies are occurrences of a relatively thick‐bedded calcilutite rich in cephalopods (cephalopod facies). In Tvären, the lower part of the succession consists of an analogous argillaceous facies, also showing similar low IC values as in Lockne, followed by calcareous mudstones with an increase of IC. Occasionally biocalcarenites with a distinctive fauna occur in the Tvären succession, probably originating as detritus from a facies developed on the rim. They are evident as peaks in IC and lows in organic carbon (Corg). The fauna in these biocalcarenites corresponds very well with those of erratic boulders derived from Tvären; moreover, they correspond to the rim facies of Lockne except for the inclusion of photosynthesizing algae, indicating shallower water at Tvären than Lockne. Consequently, we suggest equivalent distribution patterns for the carbonates of the Dalby Limestone in Lockne and Tvären.  相似文献   

3.
The Flynn Creek impact structure is an approximately 3.8 km diameter, marine‐target impact structure, which is located in north central Tennessee, USA. The target stratigraphy consists of several hundreds of meters of Ordovician carbonate strata, specifically Knox Group through Catheys‐Leipers Formation. Like other, similarly sized marine‐target impact craters, Flynn Creek's crater moat‐filling deposits include, in stratigraphic order, gravity‐driven slump material, aqueous resurge deposits, and secular (postimpact) aqueous settling deposits. In the present study, we show that Flynn Creek also possesses previously undescribed erosional resurge gullies and an annular, sloping surface that comprises an outer crater rim surrounding an inner, nested bowl‐shaped crater, thus forming a concentric crater structure. Considering this morphology, the Flynn Creek impact structure has a crater shape that has been referred to at other craters as an “inverted sombrero.” In this paper, we describe the annular rim and the inner crater at Flynn Creek using geographic information system technology. We relate these geomorphic features to the marine environment of crater formation, and compare the Flynn Creek impact structure with other marine‐target impact structures having similar features.  相似文献   

4.
Abstract— Our current understanding of marine‐impact cratering processes is partly inferred from the geological structure of the Lockne crater. We present results of a mapping campaign and structural data indicating that this crater is not pristine. In the western part of the crater, pre‐impact, impact, and post‐impact rocks are incorporated in Caledonian thrust slices and are subjected to folding and faulting. A nappe outlier in the central crater depression is a relic of the Caledonian nappe cover that reached a thickness of more than 5 km. The overthrusted crater is gently deformed. Strike of strata and trend of fold axes deviate from standard Caledonian directions (northeast‐southwest). Radially oriented crater depressions, which were previously regarded as marine resurge gullies formed when resurging seawater erosively cut through the crater brim, are interpreted to be open synclines in which resurge deposits were better preserved. The presence of the impact structure influenced orogenesis due to morphological and lithological anomalies of the crater: i) a raised crater brim zone acted as an obstacle during nappe propagation, (ii) the occurrence of a central crater depression caused downward sagging of nappes, and (iii) the lack of an appropriate detachment horizon (alum shale) within the crater led to an enhanced mechanical coupling and internal deformation of the nappe and the overthrusted foreland. Preliminary results of 3‐D‐analogue experiments suggest that a circular high‐friction zone representing the crater locally hinders nappe propagation and initiates a circumferentially striking ramp fault that delineates the crater. Crustal shortening is also partitioned into the crater basement and decreases laterally outward. Deformation of the foreland affected the geometry of the detachment and could be associated with the activation of a deeper detachment horizon beneath the crater. Strain gradients both vertically and horizontally result in non‐plane strain deformation in the vicinity of the crater. The strain tensors in the hanging and foot walls may deviate up to 90° from each other and rotated by up to 45° with respect to the standard regional orientation. The observed deflection of strata and fold axes within the Lockne crater area as revealed by field mapping is in agreement with the pattern of strain partitioning shown in the analogue models.  相似文献   

5.
Abstract— The Lockne impact event took place in a Middle Ordovician (455 Ma) epicontinental sea. The impact resulted in an at least 13.5 km wide, concentric crater in the sea floor. Lockne is one of very few locations where parts of an ejecta layer have been preserved outside the crater structure. The ejecta from the Lockne impact rests on progressively higher stratigraphic levels with increasing distance from the crater, hence forming a slightly inclined discontinuity surface in the pre‐impact strata. We report on a ～30 cm thick sandy layer at Hallen, 45 km south of the crater centre. This layer has a fining upward sequence in its lower part, followed by low‐angle cross‐laminations indicating two opposite current directions. It is rich in quartz grains with planar deformation features and contains numerous, up to 15 cm large, granite clasts from the crystalline basement at the Lockne impact site. The layer is within a sequence dated to the Baltoniodus gerdae conodont subzone. The dating is corroborated by chitinozoans indicating the latest Kukruse time below and the late Idavere above the impact layer. According to the chitinozoans biostratigraphy, some erosion may have occurred because of deposition of the impact layer. The Hallen outcrop, today 45 km from the centre of the Lockne crater, is at present the most distant accessible occurrence of ejecta from the Lockne impact. It is also the most distant location so far found where the resurge of water towards the crater has affected the bottom sediments. A greater crater diameter than hitherto assumed, thus representing greater impact energy, might explain the extent of the ejecta blanket. Fluidisation of ejecta, to be expected at a marine‐target impact, might furthermore have facilitated the wide distribution of ejecta.  相似文献   

6.
The Målingen structure is an approximately 700 m wide, rimmed, sediment‐filled, circular depression in Precambrian crystalline basement approximately 16.2 km from the concentric, marine‐target Lockne crater (inner, basement crater diameter approximately 7.5 km, total diameter in sedimentary strata approximately 13.5 km). We present here results from geologic mapping, a 148.8 m deep core drilling from the center of the structure, detailed biostratigraphic dating of the structure's formation and its age correlation with Lockne, chemostratigraphy of the sedimentary infill, and indication for shock metamorphism in quartz from breccias below the crater infill. The drill core reveals, from bottom to the top, approximately 33 m of basement rocks with increased fracturing upward, approximately 10 m of polymict crystalline breccia with shock features, approximately 97 m of slumped Cambrian mudstone, approximately 4.7 m of a normally graded, polymict sedimentary breccia that in its uppermost part grades into sandstone and siltstone (cf. resurge deposits), and approximately 1.6 m of secular sediments. The combined data set shows that the Målingen structure formed in conjunction with the Lockne crater in the same marine setting. The shape and depth of the basement crater and the cored sequence of crystalline breccias with shocked quartz, slumped sediments, and resurge deposits support an impact origin. The stratigraphic and geographic relationship with Lockne suggests the Lockne and Målingen craters to be the first described doublet impact structure by a binary asteroid into a marine‐target setting.  相似文献   

7.
Abstract— Observations of impact craters on Earth show that a water column at the target strongly influences lithology and morphology of the resultant crater. The degree of influence varies with the target water depth and impactor diameter. Morphological features detectable in satellite imagery include a concentric shape with an inner crater inset within a shallower outer crater, which is cut by gullies excavated by the resurge of water. In this study, we show that if oceans, large seas, and lakes existed on Mars for periods of time, marine‐target craters must have formed. We make an assessment of the minimum and maximum amounts of such craters based on published data on water depths, extent, and duration of putative oceans within “contacts 1 and 2,” cratering rate during the different oceanic phases, and computer modeling of minimum impactor diameters required to form long‐lasting craters in the seafloor of the oceans. We also discuss the influence of erosion and sedimentation on the preservation and exposure of the craters. For an ocean within the smaller “contact 2” with a duration of 100,000 yr and the low present crater formation rate, only ?1–2 detectable marine‐target craters would have formed. In a maximum estimate with a duration of 0.8 Gyr, as many as 1400 craters may have formed. An ocean within the larger “contact 1‐Meridiani,” with a duration of 100,000 yr, would not have received any seafloor craters despite the higher crater formation rate estimated before 3.5 Gyr. On the other hand, with a maximum duration of 0.8 Gyr, about 160 seafloor craters may have formed. However, terrestrial examples show that most marine‐target craters may be covered by thick sediments. Ground penetrating radar surveys planned for the ESA Mars Express and NASA 2005 missions may reveal buried craters, though it is uncertain if the resolution will allow the detection of diagnostic features of marine‐target craters. The implications regarding the discovery of marine‐target craters on Mars is not without significance, as such discoveries would help address the ongoing debate of whether large water bodies occupied the northern plains of Mars and would help constrain future paleoclimatic reconstructions.  相似文献   

8.
Lockne is a concentric impact structure due to a layered target where weak sediments and seawater covered a crystalline basement. A matrix‐supported, sedimentary breccia is interlayered between the crystalline breccia lens and the resurge deposits in the crater infill. As the breccia is significantly different from the direct impact breccia and the resurge deposit, we propose a separate unit name, Tramsta Breccia, based on the type locality (i.e., the LOC02 drilling at Tramsta). We use granulometry and a novel matrix line‐log method to characterize the sedimentology of the Tramsta Breccia. The obliquity of impact combined with the layered target caused an asymmetric, concentric transient crater, which upon its collapse controlled the deposition of the breccia. On the wide‐brimmed downrange side of the crater where the sedimentary target succession was removed during crater excavation, wide, overturned basement crater ejecta flaps prevented any slumping of exterior sediments. Instead, the sediments most likely originated from the uprange side where the brim was narrow and the basement crater rim was poorly developed, sediment‐rich, and relatively unstable. Here, the water cavity wall remained in closer proximity to the basement crater and, aided by the pressure of the collapsing water wall, unconsolidated black mud would flow back into the crater. The absence of interlayered resurge deposits in the Tramsta Breccia and the evidence for reworking at the contact between the overlying resurge deposits and the Tramsta Breccia indicate that the slumping was a rapid process (<75 s) terminating well before the resurge entered the crater.  相似文献   

9.
Abstract– To better understand the impact cratering process and its environmental consequences at the local to global scale, it is important to know when in the geological record of an impact crater the impact‐related processes cease. In many instances, this occurs with the end of early crater modification, leaving an obvious sedimentological boundary between impactites and secular sediments. However, in marine‐target craters the transition from early crater collapse (i.e., water resurge) to postimpact sedimentation can appear gradual. With the a priori assumption that the reworked target materials of the resurge deposits have a different chemical composition to the secular sediments we use chemostratigraphy (δ13Ccarb, %Corg, major elements) of sediments from the Chesapeake Bay, Lockne, and Tvären craters, to define this boundary. We show that the end of impact‐related sedimentation in these cases is fairly rapid, and does not necessarily coincide with a visual boundary (e.g., grain size shift). Therefore, in some cases, the boundary is more precisely determined by chemostratigraphy, especially carbonate carbon isotope variations, rather than by visual inspection. It is also shown how chemostratigraphy can confirm the age of marine‐target craters that were previously determined by biostratigraphy; by comparing postimpact carbon isotope trends with established regional trends.  相似文献   

10.
Abstract– Previous workers have proposed that a northern ocean existed early during Martian geologic history and the shorelines of that ocean would coincide roughly with the crustal dichotomy that divides the smooth, northern lowlands with the cratered, southern highlands. Arabia Terra is a region on Mars that straddles the crustal dichotomy, and several proposed shorelines are located in the area. Shallow marine impact craters on Mars likely would exhibit features like those on Earth, including characteristic morphological features that are distinctly different from that of craters formed on land. Common attributes of terrestrial marine impact craters include features of wet mass movement such as gravity slumps and debris flows; radial gullies leading into the crater depression; resurge deposits and blocks of dislocated materials; crater rim collapse or breaching of the crater wall; a central peak terrace or peak ring terrace; and subdued topography (an indicator of both age and possible flood inundation immediately following impact). In this article, these features have been used to evaluate craters on Mars as to a possible marine origin. This study used a simple quantification system to approximately judge and rank shallow marine impact crater candidates based on features observed in terrestrial analogs. Based on the quantification system, 77 potential shallow marine impact craters were found within an area bounded by 20°N and 40°N as well as 20°W and 20°E. Nine exemplary candidates were ranked with total scores of 70% or more. In a second, smaller study area, impact craters of approximately similar size and age were evaluated as a comparison and average total scores are 35%, indicating that there is some morphological difference between craters inside and outside the proposed shorelines. Results of this type of study are useful in helping to develop a general means of classification and characterization of potential marine craters.  相似文献   

11.
Abstract— The Lockne impact crater in central Sweden, with a diameter of about 7 km, formed in the mid‐Ordovician in a marine environment that was deeper than present shelf seas. The present dip of the so‐called sub‐Cambrian peneplain in the target area of the impact is about 0.85° toward the northwest. The peneplain is cut by a set of northwest‐striking, nearly vertical faults with a throw of up to just over 100 m, collectively. The identification of the peneplain and its deformation by faulting allows us to infer that the part of the crater that is exposed to the east of Lake Locknesjön has been lowered by about 100 m relative to parts exposed to the west of the lake and that it has, therefore, been spared from significant erosion. Therefore, the preservation of the whole crater is even better than was assumed in previous work. The peneplain extends to 600–700 m from the rim of the inner crater. Hence, the structural uplift of the rim is quite subdued compared to the craters that formed on land.  相似文献   

12.
Abstract— Marine impacts are one category of crater formation in volatile targets. At target water depths exceeding the diameter of the impactor, the zones of vaporization, melting, and excavation of the standard land‐target cratering model develop partially or entirely in the water column. The part of the crater that has a potential of being preserved (seafloor crater) may to a great extent be formed by material emplacement and excavation processes that are very different from land‐target craters. These processes include a high‐energy, water‐jet‐driven excavation flow. At greater water depths, the difference in strength of the target layers causes a concentric crater to evolve. The crater consists of a wide water cavity with a shallow excavation flow along the seabed surrounding a nested, deeper crater in the basement. The modification of the crater is likewise influenced by the water through its forceful resurge to fill the cavity in the water mass and the seafloor. The resurge flow is strongly erosive and incorporates both ejecta and rip‐up material from the seabed surrounding the excavated crater. A combination of field observations and impact experiments has helped us analyze the processes affecting the zone between the basement crater and the maximum extent of the water cavity. The resurge erosion is facilitated by fragmentation of the upper parts of the solid target caused by a) spallation and b) vibrations from the shallow excavation flow and, subsequently, c) the vertical collapse of the water cavity rim wall. In addition, poorly consolidated and saturated sediments may collapse extensively, possibly aided by a violent expansion of the pore water volume when it turns into a spray during passage of the rarefaction wave. This process may also occur at impacts into water‐saturated targets without an upper layer of seawater present. Our results have implications for impacts on both Earth and Mars, and possibly anywhere in the solar system where volatiles exist/have existed in the upper part of the target.  相似文献   

13.
Most impacts occur at an angle with respect to the horizontal plane. This is primarily reflected in the ejecta distribution, but at very low angle structural asymmetries such as elongation of the crater and nonradial development of the central peak become apparent. Unfortunately, impact craters with pristine ejecta layers are rare on Earth and also in areas with strong past or ongoing surface erosion on other planetary bodies, and the structural analysis of central peaks requires good exposures or even on‐site access to outcrop. However, target properties are known to greatly influence the shape of the crater, especially the relatively common target configuration of a weaker layer covering a more rigid basement. One such effect is the formation of concentric craters, i.e., a nested, deeper, inner crater surrounded by a shallow, outer crater. Here, we show that with decreasing impact angle there is a downrange shift of the outer crater with respect to the nested crater. We use a combination of (1) field observation and published 3‐D numerical simulation of one of the best examples of a terrestrial, concentric impact crater formed in a layered target with preserved ejecta layer: the Lockne crater, Sweden; (2) remote sensing data for three pristine, concentric impact craters on Mars with preserved ejecta layers further constraining the direction of impact; as well as (3) laboratory impact experiments, to develop the offset in crater concentricity into a complementary method to determine the direction of impact for layered‐target craters with poorly preserved ejecta layers.  相似文献   

14.
Abstract— The Lockne and Tvären impact craters in Sweden formed in a marine environment during the Ordovician The contrast in density between the impact breccias and the surrounding target rock of these two craters is significantly lower than what has been found in craters formed in crystalline targets on land. Another marine‐target structure, the Estonian Kärdla structure, demonstrates intermediate contrast in impact breccia and target rock, which we attribute to the interpreted shallowness of the sea at the Kärdla impact site. We conclude that the main cause for these low‐density contrasts is pore and fracture filling of calcite with subordinate quartz and fluorite. Calcite is the most abundant cement, and its density differs most from that of fractured and brecciated bedrock with a low degree of cementation. Furthermore, from the studied cases, it is concluded that the target rock to impact rock contrast is generally the highest in craters formed on land in crystalline targets and the lowest in craters formed at sea, while craters formed on land in sedimentary targets are intermediate. The low density contrasts should decrease the negative gravity anomalies of marine craters.  相似文献   

15.
Abstract— The late Eocene Chesapeake Bay impact structure (CBIS) on the Atlantic margin of Virginia is one of the largest and best‐preserved “wet‐target” craters on Earth. It provides an accessible analog for studying impact processes in layered and wet targets on volatile‐rich planets. The CBIS formed in a layered target of water, weak clastic sediments, and hard crystalline rock. The buried structure consists of a deep, filled central crater, 38 km in width, surrounded by a shallower brim known as the annular trough. The annular trough formed partly by collapse of weak sediments, which expanded the structure to ?85 km in diameter. Such extensive collapse, in addition to excavation processes, can explain the “inverted sombrero” morphology observed at some craters in layered targets. The distribution of crater‐fill materials in the CBIS is related to the morphology. Suevitic breccia, including pre‐resurge fallback deposits, is found in the central crater. Impact‐modified sediments, formed by fluidization and collapse of water‐saturated sand and silt‐clay, occur in the annular trough. Allogenic sediment‐clast breccia, interpreted as ocean‐resurge deposits, overlies the other impactites and covers the entire crater beneath a blanket of postimpact sediments. The formation of chaotic terrains on Mars is attributed to collapse due to the release of volatiles from thick layered deposits. Some flat‐floored rimless depressions with chaotic infill in these terrains are impact craters that expanded by collapse farther than expected for similar‐sized complex craters in solid targets. Studies of crater materials in the CBIS provide insights into processes of crater expansion on Mars and their links to volatiles.  相似文献   

16.
Sedimentological (line‐logging) analysis of two drill cores, FC77‐3 and FC67‐3, situated, respectively, in the northwestern and southeastern quadrants of the Flynn Creek impact structure's crater‐moat area reveals that the ~27 m thick crater moat‐filling breccia consists of three subequal parts. These parts, which were deposited during early modification stage of this marine‐target impact structure, are distinguished on the basis of vertical trends in sorting, grain size, and counts of clasts per meter in comparison with other well‐known marine‐target impact structures, namely Lockne, Tvären, and Chesapeake Bay. The lower part is interpreted to represent mainly slump deposits, and the middle part is interpreted to represent a stage intermediate between slump and marine resurge, that is, a traction flow driven by overriding suspension flow. The upper part (size graded, and relatively well sorted and fine grained) is interpreted to represent marine resurge flow only. The upper part is capped by a relatively thin and relatively fine‐grained calcarenite to calcisiltite deposit.  相似文献   

17.
Målingen is the 0.7 km wide minor crater associated to the 10 times larger Lockne crater in the unique Lockne–Målingen doublet. The craters formed at 458 Ma by the impact of a binary asteroid related to the well-known 470 Ma Main Belt breakup event responsible for a large number of Ordovician craters and fossil meteorites. The binary asteroid struck a target sequence including ~500 m of sea water, ~80 m of limestone, ~30 m of dark mud, and a peneplainized Precambrian crystalline basement. Although the Lockne crater has been extensively studied by core drillings and geophysics, little is known about the subsurface morphology of Målingen. We performed magnetic susceptibility and remanence, as well as density, measurements combined with gravity, and magnetic field surveys over the crater and its close vicinity as a base for forward magnetic and gravity modeling. The interior of the crater shows a general magnetic low of 90–100 nT broken by a clustered set of high-amplitude, short wavelength anomalies caused by bodies of mafic rock in the target below the crater and as allogenic blocks in the crater infill. The gravity shows a general −1.4 mgal anomaly over the crater caused by low-density breccia infill and fractured crystalline rocks below the crater floor. The modeling also revealed a slightly asymmetrical shape of the crater that together with the irregular ejecta distribution supports an oblique impact from the east, which is consistent with the direction of impact suggested for the Lockne crater.  相似文献   

18.
The 455 Ma old Lockne crater in central Sweden is a well-preserved and accessible instance of marine impact crater. The process of formation of the over 7 km wide crater (referred to as inner crater) in crystalline Proterozoic basement is numerically modeled under the assumption of a 45° oblique impact of an asteroid-like impactor. The 3D version of the SOVA multi-material hydrocode is used to model the shock wave propagation through the target, transient crater growth, material ejection in water and basement target, and water and fragmented rock ejecta expansion. The model results in a crater formation with the greatest ejection and melting transferred in the downrange direction. The model reproduces the growth of the water crater accompanied by the growth of a “wall” of ejected water at its outer margin. The basement ejecta are mostly trapped in this transient “water wall”. Only the largest ejected rock fragments could break through this water wall and thus reach distances farther than about 6 km from the center of the target. The model predicts approximately of impact melt formation, less than 10% of which is ejected outside of the inner (basement) crater, whereas the rest is reckoned to have remained within the inner crater. We assume that most of the ejected melt occurs as sand-sized fragments in the resurge sediments that formed subsequent to the collapse of the water crater that resulted in the powerful backflow of water. The model results are in accordance with several important details of the known geology of the crater. The model also outlines the difference in the marine crater formation processes in contrast to a crater with similar size formed on land.  相似文献   

19.
The lower Cambrian Vakkejokk Breccia is a proximal ejecta layer from a shallow marine impact. It is exposed for ~7 km along a steep mountainside in Lapland, northernmost Sweden. In its central parts, the layer is up to ~27 m thick. Here the breccia shows a vertical differentiation into (1) a lower subunit consisting of strongly deformed target sediments mixed with up to decameter size, mainly crystalline basement clasts (i.e., lower polymict breccia [LPB]); (2) a middle subunit consisting of a polymict, blocky to gravelly breccia, commonly graded (i.e., graded polymict breccia [GPB]), that, in turn, is sporadically overlain by (3) a few dm thick, sandy bed (i.e., top sandstone [TS]). Previous work interpreted the graded beds as deposited by resurging water during early crater modification. We made three short (<1.35 m) core drillings through the graded beds. The line‐logging technique previously used on cores from other marine‐target craters was complemented by logging of equal‐sized cells in photos made along the cores. Granulometry and clast lithology determinations provide further evidence for the top beds of the breccia being resurge deposits. However, the magnitude of this resurge can only be assessed by future deep core drilling of the infill of the crater hidden below the mountain.  相似文献   

20.
The ejecta blankets of impact craters in volatile‐rich environments often possess characteristic layered ejecta morphologies. The so‐called double‐layered ejecta (DLE) craters are characterized by two ejecta layers with distinct morphologies. The analysis of high‐resolution image data, especially HiRISE and CTX, provides new insights into the formation of DLE craters. A new phenomenological excavation and ejecta emplacement model for DLE craters is proposed based on a detailed case study of the Martian crater Steinheim—a well‐preserved DLE crater—and studies of other DLE craters. The observations show that the outer ejecta layer is emplaced as medial and distal ejecta that propagate outwards in a debris avalanche or (if saturated with water) a debris flow mode after landing, overrunning previously formed secondary craters. In contrast, the inner ejecta layer is formed by a translational slide of the proximal ejecta deposits during the emplacement stage that overrun and superimpose parts of the outer ejecta layer. Based on our model, DLE craters on Mars are the result of an impact event into a rock/ice mixture that produces large amounts of shock‐induced vaporization and melting of ground ice, leading to high ejection angles, proximal landing positions, and an ejecta curtain with relatively wet (in terms of water in liquid form) composition in the distal part versus dryer composition in the proximal part. As a consequence, basal melting of ice components in the ejecta at the transient crater rim, which is induced by frictional heating and the enhanced pressure at depth, initiates an outwards directed collapse of crater rim material in a translational slide mode. Our results indicate that similar processes may also be applicable for other planetary bodies with volatile‐rich environments, such as Ganymede, Europa, and the Earth.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号