首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到18条相似文献,搜索用时 656 毫秒
1.
地壳磁化强度模型和居里等温面   总被引:3,自引:0,他引:3       下载免费PDF全文
利用卫星观测的长波磁异常,用等效偶极源方法推导了中国地区的视磁化强度分布.因卫星的高度远大于磁性地壳的厚度,将视磁化强度转换成磁化强度的垂直积分,它代表地壳内磁性物质的区域变化,利用视磁化强度与地表热流相应关系,计算了中国的新疆和东部一些地区居里等温面的深度.新疆地区的居里面深度为35-50km,其分布形态与塔里木盆地和准噶尔盆地的地貌比较相似;中国东部一些地区居里面深度在20-40km之间,与一些作者用航磁等数据得到的居里深度十分接近.  相似文献   

2.
地壳磁化强度模型和居里等温面   总被引:1,自引:0,他引:1       下载免费PDF全文
利用卫星观测的长波磁异常,用等效偶极源方法推导了中国地区的视磁化强度分布.因卫星的高度远大于磁性地壳的厚度,将视磁化强度转换成磁化强度的垂直积分,它代表地壳内磁性物质的区域变化,利用视磁化强度与地表热流相应关系,计算了中国的新疆和东部一些地区居里等温面的深度.新疆地区的居里面深度为35-50km,其分布形态与塔里木盆地和准噶尔盆地的地貌比较相似;中国东部一些地区居里面深度在20-40km之间,与一些作者用航磁等数据得到的居里深度十分接近.  相似文献   

3.
巴颜喀拉块体东南缘地质构造的航磁反演成像   总被引:3,自引:0,他引:3       下载免费PDF全文
本文对研究区(98°E~103°E, 315°N~34°N) 1∶50万航磁资料的476条南北向剖面采用磁性标量层析成像方法进行了2-D成像反演.每条剖面资料点距1 km,反演的磁性柱体剖面方向宽度1 km,共约277个柱体,深度方向共8层柱体,每层厚度4 km.反演的476个断面的磁性柱体相对磁化强度幅值组成了3-D磁性数据体.对5.5、17.5、21.5、29.5 km深的磁性水平切片和7个北东向的磁性垂直切片表现的磁性特征进行了研究,并进行了地质解释.结合研究区已经公布的地质、地球物理资料,讨论了磁性细结构能提供工程地质灾害数值模拟仿真结构模型的信息,得到了反演的磁性细结构特征比场的特征能提供更多的断层和岩体3.D细节信息的初步认识.  相似文献   

4.
前兆地电阻率资料处理的剥皮法   总被引:2,自引:1,他引:2       下载免费PDF全文
毛先进  钱家栋 《地震学报》2001,24(6):645-650
在台址下电阻率分层均匀的前提下,针对我国绝大多数前兆地电台单极距观测的事实与现状,提出一种试图从这种观测所获得的视电阻率时间序列中识别电阻率表层变化和深部变化的等效模型方法.分析表明,在保持布极方式和观测结果不变的前提下,任意多层的地电结构都可以视为一个二层地电结构——等效模型.本文中,等效模型上层的地电参数(电阻率和厚度)与实际模型第一层相同,下层的地电参数(电阻率)则根据等效要求,由实际模型第二层及其以下各层的地电参数经计算得到,因此,等效模型的下层包含了实际模型第二层及其以下各层的综合影响.初步研究表明,这种方法是可行的.   相似文献   

5.
多层等效源曲面磁异常转换方法   总被引:1,自引:0,他引:1       下载免费PDF全文
李端  陈超  杜劲松  梁青 《地球物理学报》2018,61(7):3055-3073
在磁异常数据处理中,利用等效源技术重构磁异常场具有较好的稳定性和较高的计算精度,因而被广泛应用.传统方法是采用设置在近地表的单层等效源拟合实测磁异常数据,尽管拟合精度很高,但向上延拓之后往往会出现较大的拟合误差,即可能存在磁异常信号的"泄漏",尤其在原始数据中存在背景场时更容易出现此种误差.本文提出一种多层等效源技术方案,应用分布于不同深度范围内的等效源模拟实测数据,减少了等效源参数设置的盲目性.理论模型试验表明,采用多层等效源方法重构的磁异常及其梯度与分量,较单层等效源方法具有更高精度,可以吸收更完整的实测磁异常信息.论文详细地讨论了如何优化多层等效源设置、等效源参数选择以及计算方法,通过二维和三维理论模型试验,验证了在复杂条件下多层等效源方法的可行性和适应性,并且将该方法应用于广西某地的实测磁异常数据转换之中,取得了较好的应用效果.  相似文献   

6.
本文以Hanson R.O.和Miyazaki Y.的论文(1984)为基础定义了"曲化平用最佳等效源模型",并利用这一模型研制出了能快速、高精度地对大面积位场观测数据实施曲化平处理的软件程序.在严格推导该模型"单位位场正演表达式"的过程中,作者根据模型与其位场正演表达式之间的映射关系,提出了推导位场正演公式的"模型变换法".采用该方法很容易地导出了该模型的形式极其简短的"单位位场正演表达式". 作者认为,推导位场正演表达式的模型变换法可能具有普遍性,建议位场理论和方法技术研究者对此给予关注,以便在自己的研究实践中遇到类似问题时,参考、试用,并予以发展和完善.  相似文献   

7.
亚洲地区视磁化强度分布   总被引:2,自引:0,他引:2  
利用等效偶极源方法对MAGSAT卫星地磁总强度异常数据进行分析,得到了亚洲地区地壳内部的视磁化强度分布图.该分布图基本反映了中亚和东亚地区地球深部磁性结构,表明视磁化强度异常分布与地质构造具有较好的相关性.亚洲地区各地块上(哈萨克斯坦地块、塔里木地块、扬子地块、印度地块、中朝地块、青藏地块、印度支那地块和日本海地块等)都有独立的异常显示;盆地、平原和海盆为较低磁化强度区;高原和海岭为较高磁化强度区.同时,异常边界与断裂带、一些山脉和海沟相吻合.中国中部的南北构造带两侧异常差异明显:青藏高原与印度地区交界处异常梯度大,其两边覆盖着明显不同的磁化强度异常;郯庐断裂带为正负磁化强度异常分界,这条分界线还向西南方向延伸,与三江断裂带汇合.此外,在异常图上中国东南沿海的褶皱带界线明显.  相似文献   

8.
基于最小反演拟合差的重磁场源深度计算方法   总被引:2,自引:1,他引:1       下载免费PDF全文
以等效源及位场物性反演为基础,本文提出一种新的求取重磁场源深度的方法.该方法将一层等效源以一定的间隔从浅部向深部移动,并将等效源作为初始模型进行反演,当反演拟合差最小时,停止反演,此时的等效源底深即为所求场源的中心深度.由于仅需要反演一层等效源,比传统的物性反演计算时间大大减少,并且不需要进行深度加权约束.理论模型数据处理结果表明该方法能够获得较准确的场源深度:以长宽比为7.5的薄板模型为例,深度计算误差约为1个点距(25 m);以长宽比为0.5~1.5的厚板模型为例,深度计算误差小于1个点距(25m).将该方法应用于实测航磁梯度数据,计算的磁源中心深度在200~250m之间,钻井资料显示该异常由埋藏深度在200~300m的闪长岩引起,计算结果与钻井资料较吻合.  相似文献   

9.
中国南北地震带磁性层构造特征   总被引:3,自引:0,他引:3       下载免费PDF全文
吴刚  余钦范 《地震地质》1990,12(3):207-214
本文首先给出磁性层下界面反演的等效模型和其在球坐标系下变地磁倾角的二维反演方法,利用航磁资料研究了南北地震带的磁性层结构构造及其与地震活动性的关系为:1.磁性层南北两端厚,中间薄;2.下界面呈南北向的宽隆起带,北浅南深;3.磁性层所处的层位温压条件适于积累应力能量产生粘滑错动,地震多发生在磁性层内,往往位于磁性层由厚变薄的过渡处,并多伴有断裂、温泉、岩浆活动  相似文献   

10.
Sq电流体系的反演与地磁日变模型的建立   总被引:4,自引:0,他引:4  
地磁场的标量位满足拉普拉斯方程.在球坐标系中,拉普拉斯方程的解可以写成球谐级数的形式.借助球谐分析的方法,地磁场可以被分为起源于地球内部的内源场和起源于地球外部的外源场.本文的内容主要包括:(1)阐述了利用球谐分析来反演Sq电流体系的方法.反演了1997年各月的Sq空间等效电流体系,并重点分析了南北半球Sq空间等效电流体系的位形和强度随季节的变化情况.(2)基于1997年的地磁观测数据建立各月静日期间中国地区地磁日变随纬度和AE指数变化的模型.将模型的计算结果与地磁台站的观测数据进行了对比分析.  相似文献   

11.
The general problem of magnetic modelling involves accounting for the effect of both remanent magnetization and the application of an external magnetic field. However, as far as the disturbing field of a magnetic body in a magnetic environment is concerned, there is an equivalence between the effects of these two causations that allows the remanence to be represented in terms of an equivalent primary magnetic H field. Moreover, due to the linearity of the magnetic field in terms of its causations, the general modelling problem involving an applied magnetic field in the presence of remanence can be simply and more efficiently dealt with in terms of an equivalent primary field acting in the absence of any remanent magnetization.  相似文献   

12.
总强度磁异常(ΔT1)常规处理方法通常将其近似当作磁异常矢量在地磁正常场方向上的投影(ΔT2).然而对于高磁环境如磁铁矿处的磁异常场幅值可达104 nT甚至更大的情况,上述近似假设则不再成立,如采用常规处理方法可能会带来明显的误差.本文针对该问题,提出一种基于等效源的总强度磁异常非线性处理方法;该方法根据总强度磁异常获取流程,直接反演实测地磁场总强度幅值与正常场强度幅值之差来求取等效场源.本文首先通过模型试验,分析ΔT1与ΔT2的差异;然后将ΔT1当作ΔT2采用常规处理方法以及ΔT1采用新方法得到的结果作对比分析,结果表明新方法处理结果与理论值的差异为常规方法处理结果的1/5甚至更小,充分说明了新方法的有效性;最后将该方法应用于铁矿实测总强度磁异常处理实例中来转换计算磁异常总模量,其实际应用效果进一步体现了高幅值总强度磁异常数据处理过程中采用新方法的必要性.  相似文献   

13.
为了解极光电集流在sawtooth事件期间的响应情形,本文利用北半球高纬地磁台站的磁场数据,建立了以球元基本电流系反演法求得大尺度电离层水平等效电流系分布的方法,以此研究了2000年9月30日同步轨道LANL卫星观测到的sawtooth事件期间极光电集流的变化.本文将sawtooth注入事件后极区电离层夜侧西向电集流增长的特征,与中低纬地基磁场北向分量正弯扰的特征做比较分析.两者的观测结果都表明在本sawtooth注入事件期间有电流楔的形成,且电流楔约有11 h磁地方时(MLT)的宽度.此外,中低纬磁弯扰达到最大扰动值的时间一般比高纬电集流达到最大扰动值的时间长,说明影响中低纬磁弯扰变化的电流源较丰富.  相似文献   

14.
基于概率成像技术的低纬度磁异常化极方法   总被引:7,自引:4,他引:3       下载免费PDF全文
骆遥  薛典军 《地球物理学报》2009,52(7):1907-1914
化极转换是磁异常解释的重要基础,为了克服在地磁纬度较低的地区尤其是磁赤道附近化极不稳定的问题,出现了多种化极方法.本文基于概率成像技术提出了一种等效物性的反演方法,实现对地下等效场源的反演成像,取得了对低纬度磁异常稳定化极的效果.化极反演中逐次对剩余异常进行反演成像,实现由概率模型到物性模型的复杂映射,避免了类似反演中需要大型方程组求解等问题,并将概率模型的构制、物性参数的反演和反演评价有机地集成到一起,加速了反演成像的进程,使反演成像速度与目前概率成像的计算速度达到可相比拟的程度.对理论模型和实际资料的计算表明,该方法对低纬度磁异常化极处理是稳定有效的,而且可以较好地压制噪声干扰,能够在噪声干扰条件下进行反演化极.  相似文献   

15.
An iterative algorithm is proposed for magnetic induction modulus inversion. The iterative process is based on a recurrence relation for the squared induction modulus, which can be represented at each iteration step by a system of linear algebraic equations for components of the magnetization vector. Formulas for the calculation of matrix elements of this system and the determination of the magnetization at the next iteration step are given. Model and practical examples illustrating the reconstruction of magnetization and anomalous field components are presented.  相似文献   

16.
Paleomagnetic, rock magnetic, and sedimentary micro-textural data from an early Miocene mudstone sequence exposed in Okhta River, Sakhalin, Russia, indicate the presence of pyrrhotite and magnetite at different stratigraphic levels. Sites that contain only magnetite have a reversed polarity characteristic remanent magnetization (ChRM) with a low-coercivity overprint, which coincides with the present-day geomagnetic field direction. Pyrrhotite-bearing sites have stable normal polarity ChRMs that are significantly different from the present-day field direction. After correction for bedding tilt, the ChRM data fail a reversals test. However, the normal polarity pyrrhotite ChRM directions become antipodal to the tilt-corrected magnetite ChRM directions and are consistent with the expected geocentric axial dipole field direction at the site latitude after 40% partial unfolding. These data suggest that the pyrrhotite magnetization was acquired during folding and after lock-in of the magnetite remanences. Electron microscope observations of polished sections indicate that fluid-associated halos surround iron sulphide nodules. Pyrrhotite is present in randomly oriented laths in and around the nodules, and the nodules do not appear to have been deformed by sediment compaction. This observation is consistent with a late diagenetic origin of pyrrhotite. Documentation of a late diagenetic magnetization in pyrrhotite-bearing sediments here, and in recent studies of greigite-bearing sediments, suggests that care should be taken to preclude a late origin of magnetic iron sulphides before using such sediments for geomagnetic studies where it is usually crucial to establish a syn-depositional magnetization.  相似文献   

17.
Reduction to pole and other transformations of total field magnetic intensity data are often challenging to perform at low magnetic latitudes, when remanent magnetization exists, and when large topographic relief exists. Several studies have suggested the use of inversion-based equivalent source methods for performing such transformations under those complicating factors. However, there has been little assessment of the importance of erroneous edge effects that occur when fundamental assumptions underlying the transformation procedures are broken. In this work we propose a transformation procedure that utilizes magnetization vector inversion, inversion-based regional field separation and equivalent source inversion on unstructured meshes. We investigated whether edge effects in transformations could be reduced by performing a regional separation procedure prior to equivalent source inversion. We applied our proposed procedure to the transformation of total field magnetic intensity to all three Cartesian magnetic field components using a complicated synthetic example based on a real geological scenario from mineral exploration. While the procedure performed acceptably on this test example, the results could be improved. We pose many questions regarding the various choices and control parameters used throughout the procedure, but we leave the investigation of those questions to future work.  相似文献   

18.
Early in the history of planetary evolution portions of Martian crust became magnetized by dynamo-generated magnetic field. A lateral distribution of the secondary magnetic field generated by crustal remanent sources containing magnetic carriers of certain grain size and mineralogy is able to produce an ambient magnetic field of larger intensity than preexisting dynamo. This ambient field is capable of magnetizing portions of deeper crust that cools through its blocking temperatures in an absence of dynamo. We consider both magnetite (Fe3O4) and hematite (α-Fe2O3) as minerals contributing to the overall magnetization. Analysis of magnetization of magnetic minerals of various grain size and concentration reveals that magnetite grains less than 0.01 mm in size, and hematite grains larger than 0.01 mm in size can become effective magnetic source capable of magnetizing magnetic minerals contained in surrounding volume. Preexisting crustal remanence (for example ∼250 A/m relates to 25% of multi-domain hematite) can trigger a self-magnetizing process that can continue in the absence of magnetic dynamo and continue strengthening and/or weakening magnetic anomalies on Mars. Thickness of the primary magnetic layer and concentration of magnetic carriers allow specification of the temperature gradient required to trigger a self-magnetization process.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号