首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 328 毫秒
1.
The well known least squares collocation model (I) $$\ell = Ax + \left[ {\begin{array}{*{20}c} O \\ I \\ \end{array} } \right]^T \left[ {\begin{array}{*{20}c} s \\ {s' + n} \\ \end{array} } \right]$$ is compared with the model (II) $$\ell = Ax + \left[ {\begin{array}{*{20}c} R \\ I \\ \end{array} } \right]^T \left[ {\begin{array}{*{20}c} s \\ n \\ \end{array} } \right]$$ The basic differences of these two models in the framework of physical geodesy are pointed out by analyzing the validity of the equation $$s' = Rs$$ that transforms one model into the other, for different cases. For clarification purposes least squares filtering, prediction and collocation are discussed separately. In filtering problems the coefficient matrix R becomes the unit matrix and by this the two models become identical. For prediction and collocation problems the relation s′=Rs is only fulfilled in the global limit where s becomes either a continuous function on the earth or an intinite set of spherical harmonic coefficients. Applying Model (II), we see that for any finite dimension of s the operator equations of physical geodesy are approximated by a finite matrix relation whereas in Model (I) the operator equations are applied in their correct form on a continuous, approximate function \(\tilde s\) .  相似文献   

2.
A simple method for determining leaf area index (LAI), absorbed photosynthetically active radiation (APAR), dry biomass and yield in pearl millet (Pennisetum glaucum (L.) R. Br.) crop from remote sensing data is presented. The dry matter and yield can be simulated with maximum accuracy by normalised difference (ND) data during milking stage using the following models: $$\begin{array}{l} DM = - 435.45 + 786.86ND R^2 = 0.90 \\ Yield = - 95.43 + 180.00ND R^2 = 0.62 \\ \end{array}$$   相似文献   

3.
Large-scale mass redistribution in the terrestrial water storage (TWS) leads to changes in the low-degree spherical harmonic coefficients of the Earth’s surface mass density field. Studying these low-degree fluctuations is an important task that contributes to our understanding of continental hydrology. In this study, we use global GNSS measurements of vertical and horizontal crustal displacements that we correct for atmospheric and oceanic effects, and use a set of modified basis functions similar to Clarke et al. (Geophys J Int 171:1–10, 2007) to perform an inversion of the corrected measurements in order to recover changes in the coefficients of degree-0 (hydrological mass change), degree-1 (centre of mass shift) and degree-2 (flattening of the Earth) caused by variations in the TWS over the period January 2003–January 2015. We infer from the GNSS-derived degree-0 estimate an annual variation in total continental water mass with an amplitude of \((3.49 \pm 0.19) \times 10^{3}\) Gt and a phase of \(70^{\circ } \pm 3^{\circ }\) (implying a peak in early March), in excellent agreement with corresponding values derived from the Global Land Data Assimilation System (GLDAS) water storage model that amount to \((3.39 \pm 0.10) \times 10^{3}\) Gt and \(71^{\circ } \pm 2^{\circ }\), respectively. The degree-1 coefficients we recover from GNSS predict annual geocentre motion (i.e. the offset change between the centre of common mass and the centre of figure) caused by changes in TWS with amplitudes of \(0.69 \pm 0.07\) mm for GX, \(1.31 \pm 0.08\) mm for GY and \(2.60 \pm 0.13\) mm for GZ. These values agree with GLDAS and estimates obtained from the combination of GRACE and the output of an ocean model using the approach of Swenson et al. (J Geophys Res 113(B8), 2008) at the level of about 0.5, 0.3 and 0.9 mm for GX, GY and GZ, respectively. Corresponding degree-1 coefficients from SLR, however, generally show higher variability and predict larger amplitudes for GX and GZ. The results we obtain for the degree-2 coefficients from GNSS are slightly mixed, and the level of agreement with the other sources heavily depends on the individual coefficient being investigated. The best agreement is observed for \(T_{20}^C\) and \(T_{22}^S\), which contain the most prominent annual signals among the degree-2 coefficients, with amplitudes amounting to \((5.47 \pm 0.44) \times 10^{-3}\) and \((4.52 \pm 0.31) \times 10^{-3}\) m of equivalent water height (EWH), respectively, as inferred from GNSS. Corresponding agreement with values from SLR and GRACE is at the level of or better than \(0.4 \times 10^{-3}\) and \(0.9 \times 10^{-3}\) m of EWH for \(T_{20}^C\) and \(T_{22}^S\), respectively, while for both coefficients, GLDAS predicts smaller amplitudes. Somewhat lower agreement is obtained for the order-1 coefficients, \(T_{21}^C\) and \(T_{21}^S\), while our GNSS inversion seems unable to reliably recover \(T_{22}^C\). For all the coefficients we consider, the GNSS-derived estimates from the modified inversion approach are more consistent with the solutions from the other sources than corresponding estimates obtained from an unconstrained standard inversion.  相似文献   

4.
Well credited and widely used ionospheric models, such as the International Reference Ionosphere or NeQuick, describe the variation of the electron density with height by means of a piecewise profile tied to the F2-peak parameters: the electron density, $N_m \mathrm{F2}$ N m F 2 , and the height, $h_m \mathrm{F2}$ h m F 2 . Accurate values of these parameters are crucial for retrieving reliable electron density estimations from those models. When direct measurements of these parameters are not available, the models compute the parameters using the so-called ITU-R database, which was established in the early 1960s. This paper presents a technique aimed at routinely updating the ITU-R database using radio occultation electron density profiles derived from GPS measurements gathered from low Earth orbit satellites. Before being used, these radio occultation profiles are validated by fitting to them an electron density model. A re-weighted Least Squares algorithm is used for down-weighting unreliable measurements (occasionally, entire profiles) and to retrieve $N_m \mathrm{F2}$ N m F 2 and $h_m \mathrm{F2}$ h m F 2 values—together with their error estimates—from the profiles. These values are used to monthly update the database, which consists of two sets of ITU-R-like coefficients that could easily be implemented in the IRI or NeQuick models. The technique was tested with radio occultation electron density profiles that are delivered to the community by the COSMIC/FORMOSAT-3 mission team. Tests were performed for solstices and equinoxes seasons in high and low-solar activity conditions. The global mean error of the resulting maps—estimated by the Least Squares technique—is between $0.5\times 10^{10}$ 0.5 × 10 10 and $3.6\times 10^{10}$ 3.6 × 10 10 elec/m $^{-3}$ ? 3 for the F2-peak electron density (which is equivalent to 7 % of the value of the estimated parameter) and from 2.0 to 5.6 km for the height ( $\sim $ ～ 2 %).  相似文献   

5.
We present new insights on the time-averaged surface velocities, convergence and extension rates along arc-normal transects in Kumaon, Garhwal and Kashmir–Himachal regions in the Indian Himalaya from 13 years of high-precision Global Positioning System (GPS) time series (1995–2008) derived from GPS data at 14 GPS permanent and 42 campaign stations between $29.5{-}35^{\circ }\hbox {N}$ and $76{-}81^{\circ }\hbox {E}$ . The GPS surface horizontal velocities vary significantly from the Higher to Lesser Himalaya and are of the order of 30 to 48 mm/year NE in ITRF 2005 reference frame, and 17 to 2 mm/year SW in an India fixed reference frame indicating that this region is accommodating less than 2 cm/year of the India–Eurasia plate motion ( ${\sim }4~\hbox {cm/year}$ ). The total arc-normal shortening varies between ${\sim }10{-}14~\hbox {mm/year}$ along the different transects of the northwest Himalayan wedge, between the Indo-Tsangpo suture to the north and the Indo-Gangetic foreland to the south indicating high strain accumulation in the Himalayan wedge. This convergence is being accommodated differentially along the arc-normal transects; ${\sim } 5{-}10~\hbox {mm/year}$ in Lesser Himalaya and 3–4 mm/year in Higher Himalaya south of South Tibetan Detachment. Most of the convergence in the Lesser Himalaya of Garhwal and Kumaon is being accommodated just south of the Main Central Thrust fault trace, indicating high strain accumulation in this region which is also consistent with the high seismic activity in this region. In addition, for the first time an arc-normal extension of ${\sim }6~\hbox {mm/year}$ has also been observed in the Tethyan Himalaya of Kumaon. Inverse modeling of GPS-derived surface deformation rates in Garhwal and Kumaon Himalaya using a single dislocation indicate that the Main Himalayan Thrust is locked from the surface to a depth of ${\sim }15{-}20~\hbox {km}$ over a width of 110 km with associated slip rate of ${\sim }16{-}18~\hbox {mm/year}$ . These results indicate that the arc-normal rates in the Northwest Himalaya have a complex deformation pattern involving both convergence and extension, and rigorous seismo-tectonic models in the Himalaya are necessary to account for this pattern. In addition, the results also gave an estimate of co-seismic and post-seismic motion associated with the 1999 Chamoli earthquake, which is modeled to derive the slip and geometry of the rupture plane.  相似文献   

6.
针对观测向量和系数矩阵权分配不合理、验前随机模型不准确的情况,以部分误差变量（partial errors-in-variables,PEIV）模型为基础,推导了附有相对权比的总体最小二乘平差算法;通过在平差准则中加入相对权比,自适应调整观测向量和系数矩阵随机元素对模型参数估计的贡献,给出了确定相对权比的验前单位权方差法和判别函数最小化迭代算法,该算法普遍适用于一般性的系数矩阵和权矩阵。通过直线拟合和坐标转换模拟算例的比较分析,发现当观测值和系数矩阵的验前单位权方差已知,且较准确时,验前单位权方差法确定相对权比和参数估计的效果较好;而以${{\overline{\mathit{{\mathit{\Phi}}}}}_{1}}\left( \hat{\varepsilon },{{{\hat{\varepsilon }}}_{a}} \right)={{\hat{\varepsilon }}^{\text{T}}}\hat{\varepsilon }+\hat{\varepsilon }_{a}^{\text{T}}{{\hat{\varepsilon }}_{a}} $作为判别函数是判别函数最小化迭代算法中效果最好的。  相似文献   

7.
We can map zenith wet delays onto precipitable water with a conversion factor, but in order to calculate the exact conversion factor, we must precisely calculate its key variable $T_\mathrm{m}$ . Yao et al. (J Geod 86:1125–1135, 2012. doi:10.1007/s00190-012-0568-1) established the first generation of global $T_\mathrm{m}$ model (GTm-I) with ground-based radiosonde data, but due to the lack of radiosonde data at sea, the model appears to be abnormal in some areas. Given that sea surface temperature varies less than that on land, and the GPT model and the Bevis $T_\mathrm{m}$ – $T_\mathrm{s}$ relationship are accurate enough to describe the surface temperature and $T_\mathrm{m}$ , this paper capitalizes on the GPT model and the Bevis $T_\mathrm{m}$ – $T_\mathrm{s}$ relationship to provide simulated $T_\mathrm{m}$ at sea, as a compensation for the lack of data. Combined with the $T_\mathrm{m}$ from radiosonde data, we recalculated the GTm model coefficients. The results show that this method not only improves the accuracy of the GTm model significantly at sea but also improves that on land, making the GTm model more stable and practically applicable.  相似文献   

8.
The integral formulas of the associated Legendre functions   总被引：1，自引：0，他引：1  
A new kind of integral formulas for ${\bar{P}_{n,m} (x)}$ is derived from the addition theorem about the Legendre Functions when n ? m is an even number. Based on the newly introduced integral formulas, the fully normalized associated Legendre functions can be directly computed without using any recursion methods that currently are often used in the computations. In addition, some arithmetic examples are computed with the increasing degree recursion and the integral methods introduced in the paper respectively, in order to compare the precisions and run-times of these two methods in computing the fully normalized associated Legendre functions. The results indicate that the precisions of the integral methods are almost consistent for variant x in computing ${\bar{P}_{n,m} (x)}$ , i.e., the precisions are independent of the choice of x on the interval [0,1]. In contrast, the precisions of the increasing degree recursion change with different values on the interval [0,1], particularly, when x tends to 1, the errors of computing ${\bar{P}_{n,m} (x)}$ by the increasing degree recursion become unacceptable when the degree becomes larger and larger. On the other hand, the integral methods cost more run-time than the increasing degree recursion. Hence, it is suggested that combinations of the integral method and the increasing degree recursion can be adopted, that is, the integral methods can be used as a replacement for the recursive initials when the recursion method become divergent.  相似文献   

9.
Computation of broadcast ephemerides is a fundamental task in satellite navigation and positioning. The GPS constellation is composed of medium-earth-orbit (MEO) satellites, and therefore can employ a uniform parameter set to produce broadcast ephemerides. However, other navigation satellite systems such as Compass and IRNSS may include a mixture of inclined-geosynchronous-orbit (IGSO), geostationary-earth-orbit (GEO) and MEO satellites, requiring different parameter sets for each type of orbit. We analyze the variational characteristics of satellite ephemerides with respect to orbital elements; then present a method to design an optimal parameter set for broadcast ephemerides, and derive the parameter sets for IGSO, GEO, and MEO satellites. The computational complexities of the user algorithms for the optimal parameter sets are equivalent to that of the standard GPS user algorithm. Simulation and statistical analyses indicate that the optimal parameter set is $ \left\{ {\sqrt {A_{0} } ,e_{0} ,i_{0} ,\Upomega_{0} ,M_{0} ,\omega_{0} ,\dot{\Upomega },\dot{u},\dot{i},C_{\Upomega c3} ,C_{\Upomega s3} ,C_{uc2} ,C_{us2} ,C_{rc2} ,C_{rs2} } \right\} $ for IGSO and GEO satellites, and $ \left\{ {\sqrt {A_{0} } ,e_{0} ,i_{0} ,\Upomega_{0} ,M_{0} ,\omega_{0} ,\dot{\Upomega },\dot{u},\dot{i},C_{uc2} ,C_{us2} ,C_{rc2} ,C_{rs2} ,C_{ic2} ,C_{is2} } \right\} $ for MEO satellites.  相似文献   

10.
In this paper, we investigate the impact of ambient temperature changes on the gravity reading of spring-based relative gravimeters. Controlled heating experiments using two Scintrex CG5 gravimeters allowed us to determine a linear correlation (R \(^{2}>\) 0.9) between ambient temperature and gravity variations. The relation is stable and constant for the two CG5 we used: ?5 nm/s\(^{2}/^\circ \)C. A linear relation is also seen between gravity and residual sensor temperature variations (R \(^{2}>\) 0.75), but contrary to ambient temperature, this relation is neither constant over time nor similar between the two instruments. The linear correction of ambient temperature on the controlled heating time series reduced the standard deviation at least by a factor of 2, to less than 10 nm/s\(^{2}\). The laboratory results allowed for reprocessing the data gathered on a field survey that originally aimed to characterize local hydrological heterogeneities on a karstic area. The correction of two years of monthly CG5 measurements from ambient temperature variations halved the standard deviation (from 62 to 32 nm/s\(^{2}\)) and led us to a better hydrological interpretation. Although the origin of this effect is uncertain, we suggest that an imperfect control of the sensor temperature may be involved, as well as a change of the properties of an electronic component.  相似文献   

11.
Determining how the global mean sea level (GMSL) evolves with time is of primary importance to understand one of the main consequences of global warming and its potential impact on populations living near coasts or in low-lying islands. Five groups are routinely providing satellite altimetry-based estimates of the GMSL over the altimetry era (since late 1992). Because each group developed its own approach to compute the GMSL time series, this leads to some differences in the GMSL interannual variability and linear trend. While over the whole high-precision altimetry time span (1993–2012), good agreement is noticed for the computed GMSL linear trend (of $3.1\pm 0.4$  mm/year), on shorter time spans (e.g., ${<}10~\hbox {years}$ ), trend differences are significantly larger than the 0.4 mm/year uncertainty. Here we investigate the sources of the trend differences, focusing on the averaging methods used to generate the GMSL. For that purpose, we consider outputs from two different groups: the Colorado University (CU) and Archiving, Validation and Interpretation of Satellite Oceanographic Data (AVISO) because associated processing of each group is largely representative of all other groups. For this investigation, we use the high-resolution MERCATOR ocean circulation model with data assimilation (version Glorys2-v1) and compute synthetic sea surface height (SSH) data by interpolating the model grids at the time and location of “true” along-track satellite altimetry measurements, focusing on the Jason-1 operating period (i.e., 2002–2009). These synthetic SSH data are then treated as “real” altimetry measurements, allowing us to test the different averaging methods used by the two processing groups for computing the GMSL: (1) averaging along-track altimetry data (as done by CU) or (2) gridding the along-track data into $2^{\circ }\times 2^{\circ }$ meshes and then geographical averaging of the gridded data (as done by AVISO). We also investigate the effect of considering or not SSH data at shallow depths $({<}120~\hbox {m})$ as well as the editing procedure. We find that the main difference comes from the averaging method with significant differences depending on latitude. In the tropics, the $2^{\circ }\times 2^{\circ }$ gridding method used by AVISO overestimates by 11 % the GMSL trend. At high latitudes (above $60^{\circ }\hbox {N}/\hbox {S}$ ), both methods underestimate the GMSL trend. Our calculation shows that the CU method (along-track averaging) and AVISO gridding process underestimate the trend in high latitudes of the northern hemisphere by 0.9 and 1.2 mm/year, respectively. While we were able to attribute the AVISO trend overestimation in the tropics to grid cells with too few data, the cause of underestimation at high latitudes remains unclear and needs further investigation.  相似文献   

12.
Non-linear station motions in epoch and multi-year reference frames   总被引：5，自引：5，他引：0  
In the conventions of the International Earth Rotation and Reference Systems Service (e.g. IERS Conventions 2010), it is recommended that the instantaneous station position, which is fixed to the Earth’s crust, is described by a regularized station position and conventional correction models. Current realizations of the International Terrestrial Reference Frame use a station position at a reference epoch and a constant velocity to describe the motion of the regularized station position in time. An advantage of this parameterization is the possibility to provide station coordinates of high accuracy over a long time span. Various publications have shown that residual non-linear station motions can reach a magnitude of a few centimeters due to not considered loading effects. Consistently estimated parameters like the Earth Orientation Parameters (EOP) may be affected if these non-linear station motions are neglected. In this paper, we investigate a new approach, which is based on a frequent (e.g. weekly) estimation of station positions and EOP from a combination of epoch normal equations of the space geodetic techniques Global Positioning System (GPS), Satellite Laser Ranging (SLR) and Very Long Baseline Interferometry (VLBI). The resulting time series of epoch reference frames are studied in detail and are compared with the conventional secular approach. It is shown that both approaches have specific advantages and disadvantages, which are discussed in the paper. A major advantage of the frequently estimated epoch reference frames is that the non-linear station motions are implicitly taken into account, which is a major limiting factor for the accuracy of the secular frames. Various test computations and comparisons between the epoch and secular approach are performed. The authors found that the consistently estimated EOP are systematically affected by the two different combination approaches. The differences between the epoch and secular frames reach magnitudes of $23.6~\upmu \hbox {as}$ (0.73 mm) and $39.8~\upmu \hbox {as}$ (1.23 mm) for the x-pole and y-pole, respectively, in case of the combined solutions. For the SLR-only solutions, significant differences with amplitudes of $77.3~\upmu \hbox {as}$ (2.39 mm) can be found.  相似文献   

13.
A neural network model for predicting weighted mean temperature   总被引：2，自引：0，他引：2  
Maohua Ding 《Journal of Geodesy》2018,92(10):1187-1198
Water vapor is an important element of the Earth’s atmosphere, and most of it concentrates at the bottom of the troposphere. Knowledge of the water vapor measured by Global Navigation Satellite Systems (GNSS) is an important direction of GNSS research. In particular, when the zenith wet delay is converted to precipitable water vapor, the weighted mean temperature \(T_\mathrm{m}\) is a variable parameter to be determined in this conversion. The purpose of the study is getting a more accurate \(T_\mathrm{m}\) model for global users by a combination of two different characteristics of \(T_\mathrm{m}\) (i.e., the \(T_\mathrm{m}\) seasonal variations and the relationships between \(T_\mathrm{m}\) and surface meteorological elements). The modeling process was carried out by using the neural network technology. A multilayer feedforward neural network model (the NN) was established. The NN model is used with measurements of only surface temperature \(T_\mathrm{S}\). The NN was validated and compared with four other published global \(T_\mathrm{m}\) models. The results show that the NN performed better than any of the four compared models on the global scale.  相似文献   

14.
Canadian gravimetric geoid model 2010   总被引：4，自引：1，他引：3  
A new gravimetric geoid model, Canadian Gravimetric Geoid 2010 (CGG2010), has been developed to upgrade the previous geoid model CGG2005. CGG2010 represents the separation between the reference ellipsoid of GRS80 and the Earth’s equipotential surface of $W_0=62{,}636{,}855.69~\mathrm{m}^2\mathrm{s}^{-2}$ W 0 = 62 , 636 , 855.69 m 2 s ? 2 . The Stokes–Helmert method has been re-formulated for the determination of CGG2010 by a new Stokes kernel modification. It reduces the effect of the systematic error in the Canadian terrestrial gravity data on the geoid to the level below 2 cm from about 20 cm using other existing modification techniques, and renders a smooth spectral combination of the satellite and terrestrial gravity data. The long wavelength components of CGG2010 include the GOCE contribution contained in a combined GRACE and GOCE geopotential model: GOCO01S, which ranges from $-20.1$ ? 20.1 to 16.7 cm with an RMS of 2.9 cm. Improvement has been also achieved through the refinement of geoid modelling procedure and the use of new data. (1) The downward continuation effect has been accounted accurately ranging from $-22.1$ ? 22.1 to 16.5 cm with an RMS of 0.9 cm. (2) The geoid residual from the Stokes integral is reduced to 4 cm in RMS by the use of an ultra-high degree spherical harmonic representation of global elevation model for deriving the reference Helmert field in conjunction with a derived global geopotential model. (3) The Canadian gravimetric geoid model is published for the first time with associated error estimates. In addition, CGG2010 includes the new marine gravity data, ArcGP gravity grids, and the new Canadian Digital Elevation Data (CDED) 1:50K. CGG2010 is compared to GPS-levelling data in Canada. The standard deviations are estimated to vary from 2 to 10 cm with the largest error in the mountainous areas of western Canada. We demonstrate its improvement over the previous models CGG2005 and EGM2008.  相似文献   

15.
Proper understanding of how the Earth’s mass distributions and redistributions influence the Earth’s gravity field-related functionals is crucial for numerous applications in geodesy, geophysics and related geosciences. Calculations of the gravitational curvatures (GC) have been proposed in geodesy in recent years. In view of future satellite missions, the sixth-order developments of the gradients are becoming requisite. In this paper, a set of 3D integral GC formulas of a tesseroid mass body have been provided by spherical integral kernels in the spatial domain. Based on the Taylor series expansion approach, the numerical expressions of the 3D GC formulas are provided up to sixth order. Moreover, numerical experiments demonstrate the correctness of the 3D Taylor series approach for the GC formulas with order as high as sixth order. Analogous to other gravitational effects (e.g., gravitational potential, gravity vector, gravity gradient tensor), numerically it is found that there exist the very-near-area problem and polar singularity problem in the GC east–east–radial, north–north–radial and radial–radial–radial components in spatial domain, and compared to the other gravitational effects, the relative approximation errors of the GC components are larger due to not only the influence of the geocentric distance but also the influence of the latitude. This study shows that the magnitude of each term for the nonzero GC functionals by a grid resolution 15\(^{{\prime } }\,\times \) 15\(^{{\prime }}\) at GOCE satellite height can reach of about 10\(^{-16}\) m\(^{-1}\) s\(^{2}\) for zero order, 10\(^{-24 }\) or 10\(^{-23}\) m\(^{-1}\) s\(^{2}\) for second order, 10\(^{-29}\) m\(^{-1}\) s\(^{2}\) for fourth order and 10\(^{-35}\) or 10\(^{-34}\) m\(^{-1}\) s\(^{2}\) for sixth order, respectively.  相似文献   

16.
We show that the current levels of accuracy being achieved for the precise orbit determination (POD) of low-Earth orbiters demonstrate the need for the self-consistent treatment of tidal variations in the geocenter. Our study uses as an example the POD of the OSTM/Jason-2 satellite altimeter mission based upon Global Positioning System (GPS) tracking data. Current GPS-based POD solutions are demonstrating root-mean-square (RMS) radial orbit accuracy and precision of \({<}1\)  cm and 1 mm, respectively. Meanwhile, we show that the RMS of three-dimensional tidal geocenter variations is \({<}6\)  mm, but can be as large as 15 mm, with the largest component along the Earth’s spin axis. Our results demonstrate that GPS-based POD of Earth orbiters is best performed using GPS satellite orbit positions that are defined in a reference frame whose origin is at the center of mass of the entire Earth system, including the ocean tides. Errors in the GPS-based POD solutions for OSTM/Jason-2 of \({<}4\)  mm (3D RMS) and \({<}2\)  mm (radial RMS) are introduced when tidal geocenter variations are not treated consistently. Nevertheless, inconsistent treatment is measurable in the OSTM/Jason-2 POD solutions and manifests through degraded post-fit tracking data residuals, orbit precision, and relative orbit accuracy. For the latter metric, sea surface height crossover variance is higher by \(6~\hbox {mm}^{2}\) when tidal geocenter variations are treated inconsistently.  相似文献   

17.
  相似文献   

18.
The present paper deals with the least-squares adjustment where the design matrix (A) is rank-deficient. The adjusted parameters \(\hat x\) as well as their variance-covariance matrix ( \(\sum _{\hat x} \) ) can be obtained as in the “standard” adjustment whereA has the full column rank, supplemented with constraints, \(C\hat x = w\) , whereC is the constraint matrix andw is sometimes called the “constant vector”. In this analysis only the inner adjustment constraints are considered, whereC has the full row rank equal to the rank deficiency ofA, andAC T =0. Perhaps the most important outcome points to the three kinds of results
  1. A general least-squares solution where both \(\hat x\) and \(\sum _{\hat x} \) are indeterminate corresponds tow=arbitrary random vector.
  2. The minimum trace (least-squares) solution where \(\hat x\) is indeterminate but \(\sum _{\hat x} \) is detemined (and trace \(\sum _{\hat x} \) corresponds tow=arbitrary constant vector.
  3. The minimum norm (least-squares) solution where both \(\hat x\) and \(\sum _{\hat x} \) are determined (and norm \(\hat x\) , trace \(\sum _{\hat x} \) corresponds tow?0
  相似文献   

19.
An investigation was made of the behaviour of the variable (where ρij are the discrepancies between the direct and reverse measurements of the height of consecutive bench marks and theR ij are their distance apart) in a partial net of the Italian high precision levelling of a total length of about1.400 km. The methods of analysis employed were in general non-parametric individual and cumulative tests; in particular randomness, normality and asymmetry tests were carried out. The computers employed wereIBM/7094/7040. From the results evidence was obtained of the existence of an asymmetry in respect to zero of thex ij confirming the well-known results given firstly by Lallemand. A new result was obtained from the tests of randomness which put in evidence trends of the mean values of thex ij and explained some anomalous behaviours of the cumulative discrepancy curves. The extension of this investigation to a broader net possibly covering other national nets would be very useful to get a deeper insight into the behaviour of the errors in high precision levelling. Ad hoc programs for electronic computers are available to accomplish this job quickly. Presented at the 14th International Assembly of Geodesy (Lucerne, 1967).  相似文献   

20.
The frequency stability and uncertainty of the latest generation of optical atomic clocks is now approaching the one part in \(10^{18}\) level. Comparisons between earthbound clocks at rest must account for the relativistic redshift of the clock frequencies, which is proportional to the corresponding gravity (gravitational plus centrifugal) potential difference. For contributions to international timescales, the relativistic redshift correction must be computed with respect to a conventional zero potential value in order to be consistent with the definition of Terrestrial Time. To benefit fully from the uncertainty of the optical clocks, the gravity potential must be determined with an accuracy of about \(0.1\,\hbox {m}^{2}\,\hbox {s}^{-2}\), equivalent to about 0.01 m in height. This contribution focuses on the static part of the gravity field, assuming that temporal variations are accounted for separately by appropriate reductions. Two geodetic approaches are investigated for the derivation of gravity potential values: geometric levelling and the Global Navigation Satellite Systems (GNSS)/geoid approach. Geometric levelling gives potential differences with millimetre uncertainty over shorter distances (several kilometres), but is susceptible to systematic errors at the decimetre level over large distances. The GNSS/geoid approach gives absolute gravity potential values, but with an uncertainty corresponding to about 2 cm in height. For large distances, the GNSS/geoid approach should therefore be better than geometric levelling. This is demonstrated by the results from practical investigations related to three clock sites in Germany and one in France. The estimated uncertainty for the relativistic redshift correction at each site is about \(2 \times 10^{-18}\).  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号