共查询到17条相似文献，搜索用时 156 毫秒
1.
磁流变阻尼器对高层建筑风振反应的半主动控制 总被引：21，自引：3，他引：21
本文探讨了磁流变阻尼器在高层建筑风振控制中的应用，在经典线性最优控制理论的基础上，根据磁流变阻尼器的特点，提出了一种新型的半主动控制策略，应有该方法对一40层的钢结构的风振反应进行了计算机模拟，结果表明，采用磁流变阻尼器对高层建筑进行半主动控制的能够有效减小结构的风振反应。 相似文献
2.
设置TMD,TLD控制系统的高层建筑风振分析与设计方法 总被引：15，自引：0，他引：15
本文结合我国现行风荷载规范，研究设置ＴＭＤ、ＴＬＤ控制系统的高层建筑风振分析与抗风设计的实用方法。首先，ＴＭＤ、ＴＬＤ系统的风振控制效果归并到了受控结构的内荷载折减上；其次，导出了满足舒适度标准的结构动侧移界限的相应的计算公式；第三，比较了ＴＭＤ、ＴＬＤ系统的控制效果以及分别对高层钢和钢筋混凝土结构的控制效果；最后，通过大量的计算和分析，分别确定了ＴＭＤ、ＴＬＤ系统参数的最佳取值区间以及参数之间的 相似文献
3.
高层建筑利用TLD减小风振反应的研究 总被引：1，自引：0，他引：1
本文利用调频液体阻尼器（TLD）对高层建筑风振响应进行了控制研究。通过理论计算与分析探讨了TLD中液体质量变化及TLD安装位置的不同对所研究的高层结构风振控制作用的影响，给出了合理的计算结果。 相似文献
4.
磁流变阻尼器作为一种比较典型的半主动控制元件,具有构造简单、响应速度快、耐久性好、阻尼力大且连续可调等优点。即使地震中能源中断,磁流变阻尼器仍可以作为被动耗能装置继续工作发挥作用,可靠性高。设计合理有效的磁流变阻尼器半主动控制方法,对于整体结构的减震效果尤其重要。提出一种改进的磁流变阻尼器的半主动控制策略-改进的Bang-Bang控制策略,对装有磁流变阻尼器的减震控制3层框架结构进行了一系列的实时混合模拟试验,对多种半主动控制方法下的振动控制效果进行试验分析。试验结果表明:磁流变阻尼器对框架结构的减震效果显著,并验证了提出的磁流变阻尼器半主动控制策略的有效性。 相似文献
5.
设置TMD、TLD控制系统的高层建筑风振分析与设计方法 总被引：24，自引：2，他引：24
本文结合我国现行风荷载规范,研究设置TMD、TLD控制系统的高层建筑风振分析与抗风设计的实用方法。首先,将TMD、TLD系统的风振控制效果归并到了受控结构的风荷载折减上;其次,导出了满足舒适度标准的结构动侧移界限和相应的计算公式;第三,比较了TMD、TLD系统的控制效果以及分别对高层钢和钢筋混凝土结构的控制效果;最后,通过大量的计算和分析,分别确定了TMD、TLD系统参数的最佳取值区间以及参数之间的最佳匹配关系。 相似文献
6.
依据自回归(AR)法,确立了考虑风速时程空间相关性的模拟方法,并利用Matlab语言编制了相应的程序。基于上述方法,模拟了某体育场挑篷结构的风速时程,并对所得风速时程离散值进行数理统计分析,结果表明模拟谱与目标谱吻合较好。根据结构风振响应分析的需要,将模拟风速转变为风荷载对结构进行时程分析,获得了结构风振响应,为结构抗风设计提供依据。计算表明,基于风速时程的结构风振响应分析方法可有效分析体育场挑篷的风振响应。 相似文献
7.
8.
针对磁流变阻尼器存在的磁流变液体沉淀、结构复杂、阻尼通道设计不尽合理等问题和工程应用中多自由度减振的实际需求,采用阻尼通道的锥形孔结构、平行圆盘缝隙式设计和分体式结构、实现磁流变阻尼器易安装、散热好、效率高和多自由度减振使用的目的.通过台架试验研究,分析了控制电流、激振频率和振幅对阻尼器阻尼特件的影响,结果表明所设计的... 相似文献
9.
磁流变阻尼器在受控结构中的优化布置 总被引：4，自引：0，他引：4
高层建筑结构中由于地震引起的结构体系的振动是十分严重的,利用磁流变阻尼器进行振动控制的方法可以有效减小体系的振动反应、这种振动控制的效果,不仅取决于阻尼器出力大小和控制算法的优化,也取决于阻尼器在高层结构中的布置位置。首先对近年来出现的许多优化布置方法进行了阐述,论述了这些方法的优缺点,然后选用了一种优化布置方法并结合一个结构体系进行了阻尼器的优化布置研究,最后给出了阻尼器优化布置的几个原则。研究的结果表明通过阻尼器在高层结构中的优化布置可以有效提高振动控制的效果． 相似文献
10.
磁流变阻尼器的构造设计及其阻尼力性能的试验研究 总被引：21，自引：2，他引：21
本文根据磁流变液的材料特点和磁路设计原则，设计并制作了一个双出 杆的剪切阀式磁流阻尼器，在伺服试验机上对所设计制作的磁流变阻尼器的阻尼力性能进行了试验研究，并分析了影响阻尼力的各种因素。结果表明：所设计制作的磁流变阻尼器具有一定的剩磁，但剩磁对阻尼力可调系数的影响很小；所设计制作的磁流变阻尼器能够达到的最大阻尼力和阻尼力可调系数都很理想。由此得出结论，本文所设计制作的磁流变阻尼器具有卓越的阻尼性能，可在土木工程结构的半主动振动控制设计中加以推广和应用。 相似文献
11.
大连国贸大厦高层水箱风振控制研究及应用 总被引：3，自引：1，他引：2
本文针对一实际工程结构———大连国贸大厦,研究了风荷载作用下调液阻尼器的减振控制作用。首先建立了该结构的简化计算模型,利用Davenport谱给出了模拟风荷载。在大厦所处位置进行多次测量,得到实际风速样本。选取其中风速较大、过程平稳的样本,对实测样本和模拟样本的频谱进行比较,验证了模拟风荷载的合理性。文中将大厦顶层的生活水箱设计成可减小结构位移及加速度反应的控制装置TLD(tuned liqu id damper),根据不同工况进行数值计算,选出最佳方案,设计出可实际应用、并达到一定减振效果的减振水箱,以提高大厦在风荷载作用下的舒适度。 相似文献
12.
This paper proposes a semiactive control system to reduce the coupled lateral and torsional motions in asymmetric buildings subjected to horizontal seismic excitations. Magnetorheological (MR) dampers are applied as semiactive control devices and the control input determination is based on a clipped‐optimal control algorithm which uses absolute acceleration feedback. The performance of this method is studied experimentally using a 2‐story building model with an asymmetric stiffness distribution. An automated system identification methodology is implemented to develop a control‐oriented model which has the natural frequencies observed in the experimental system. The parameters for the MR damper model are identified using experimental data to develop an integrated model of the structure and MR dampers. To demonstrate the performance of this control system on the experimental structure, a shake table is used to reproduce an El Centro 1940 N–S earthquake as well as a random white noise excitation. The responses for the proposed control system are compared to those of passive control cases in which a constant voltage is applied to the MR damper. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
13.
Adding dampers is a commonly adopted seismic risk mitigation strategy for modern buildings, and the corresponding design procedure of dampers has been well established by the Chinese Building Code. Even though all types of dampers are designed by the same procedure, actual seismic performance of the building may differ from one to the others. In this study, a nine-story benchmark steel building is established, and three different and typical types of dampers are designed according to the Chinese Building Code to realize structural vibration control under strong earthquake excitation. The seismic response of the prototype building equipped with a viscoelastic damper, viscous damper and buckling-restrained brace(BRB) subjected to 10 earthquake records are calculated, and Incremental Dynamic Analysis(IDA) is performed to describe progressive damage of the structure under increasing earthquake intensity. In the perspective of fragility, it shows that the viscoelastic damper has the highest collapse margin ratio(CMR), and the viscous damper provides the best drift control. Both the BRB and viscoelastic dampers can effectively reduce the floor acceleration responses in the mid-rise building. 相似文献
14.
A fuzzy‐logic control algorithm, based on the fuzzification of the MR damper characteristics, is presented for the semiactive control of building frames under seismic excitation. The MR damper characteristics are represented by force–velocity and force–displacement curves obtained from the sinusoidal actuation test. The method does not require any analytical model of MR damper characteristics, such as the Bouc‐Wen model, to be incorporated into the control algorithm. The control algorithm has a feedback structure and is implemented by using the fuzzy‐logic and Simulink toolboxes of MATLAB. The performance of the algorithm is studied by using it to control the responses of two example buildings taken from the literature—a three‐storey building frame, in which controlled responses are obtained by clipped‐optimal control and a ten‐storey building frame. The results indicate that the proposed scheme provides nearly the same percentage reduction of responses as that obtained by the clipped‐optimal control with much less control force and much less command voltage. Position of the damper is found to significantly affect the controlled responses of the structure. It is observed that any increase in the damper capacity beyond a saturation level does not improve the performance of the controller. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
15.
Shear‐type buildings with Maxwell model‐based brace–damper systems are studied in this paper with a primary emphasis on the effects of brace stiffness. A single‐story building with a viscous damper installed on top of a Chevron‐brace is first investigated. Closed‐form solutions are derived for the simple structure, relating the brace stiffness and damper coefficient to the targeted reduction in response displacement or acceleration. For a given brace stiffness, the solution is minimized to give a set of formulae that will allow the optimal damper coefficient to be determined, assuring the desired performance. The model is subsequently extended to multistory buildings with viscous dampers installed on top of Chevron‐braces. For a targeted reduction in the mean square of the interstory drift, floor acceleration or base shear force, the minimum brace stiffness and optimal damper coefficients are obtained through an iterative procedure. The response reduction, which signifies the improved performance, is achieved by a combination of brace stiffness and viscous damper coefficients, unlike conventional approaches where damper coefficients are typically optimized independent of brace stiffnesses. Characteristics of multi‐degree‐of‐freedom systems are studied using a 2‐story and a 10‐story buildings where the effects of brace stiffness on the overall performance of the building can be quantified. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
16.
17.
钢框架高层建筑结构是当前高层建筑设计中使用最为广泛的技术,为提升其抗震性能,本文研究将调谐质量阻尼器安装在钢框架高层建筑结构顶部,考虑到建筑空间需求、防止集中荷载和提升控制效果等因素,在相同楼层或同顶部接近楼层中设置数个较小的、频率一致的子控制装置,通过设置调谐质量阻尼器受控结构等效阻尼比求极值的方法,获取最优刚度与最优阻尼系数;将获取的结果在有限元软件中进行模态分析获取模态质量,实现钢框架高层建筑结构扭转振动的减振控制。实验结果表明,地震荷载下,该方法使得建筑结构顶层角位移峰值和角加速度峰值分别降低50%和30%左右,建筑结构响应下降19%～26%,提高了高层建筑结构的稳定性。 相似文献