首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
A two-dimensional boundary integral method to analyse the flow of contaminant in fractured media having a two- or three-dimensional orthogonal fracture network is presented. The method assumes that the fractures provide the paths of least resistance for transport of contaminants while the matrix, because of its low permeability, acts as ‘storage blocks’ into which the contaminant diffuses. Laplace transform is used to eliminate the time variable in the governing equation in order to facilitate the formulation of a boundary integral equation in the Laplace transform space. Conventional boundary element techniques are applied to solve for the contaminant concentrations at specified locations in the spatial domain. The concentration in the time domain is then obtained by using an efficient inversion technique developed by Talbot. The method is able to analyse the behaviour of waste repositories which have diminishing concentration due to the mass transport of the contaminant into the surrounding fractured media.  相似文献   

2.
A three-dimensional (3D) mass transport numerical model is presented. The code is based on a particle tracking technique: the random-walk method, which is based on the analogy between the advection–dispersion equation and the Fokker–Planck equation. The velocity field is calculated by the mixed hybrid finite element formulation of the flow equation. A new efficient method is developed to handle the dissimilarity between Fokker–Planck equation and advection–dispersion equation to avoid accumulation of particles in low dispersive regions. A comparison made on a layered aquifer example between this method and other algorithms commonly used, shows the efficiency of the new method. The code is validated by a simulation of a 3D tracer transport experiment performed on a laboratory model. It represents a heterogeneous aquifer of about 6-m length, 1-m width, and 1-m depth. The porous medium is made of three different sorts of sand. Sodium chloride is used as a tracer. Comparisons between simulated and measured values, with and without the presented method, also proves the accuracy of the new algorithm.  相似文献   

3.
Laboratory simulation of geogas microbubble flow   总被引:3,自引:0,他引:3  
Preliminary laboratory tests provided first data on the behavior of gas microbubbles through porous media in the framework of the geogas theory. Under experimented conditions with laboratory equipment arranged for pressure controlled gas-tracer injection and sampling, gas microbubbles moved up to ten times faster than singlephase flow in dry media under the same injection pressure. Microbubbles were determined to be very sensitive to changes in injection pressure and their terminal velocity seems to be described with good approximation by the Stokes formula. The capability of microbubbles to pick up and transport upward for short distances solid ultra-small particles (metallic and radionuclide compounds) has been proved. Results are consistent with a time-dependent process linked to the transport properties of microbubbles (e.g., flotation), such as that reported by some authors.  相似文献   

4.
A new semi-analytical solution for the transport of a conservative contaminant species in a fractured medium having a regular two- or three-dimensional fracture network is presented. The application of the technique and some of the practical implications arising from an examination of contaminant migration in fractured systems is discussed. Particular consideration is given to the effects of Darcy velocity, fracture spacing, matrix porosity, dispersivity and the mass of contaminant available for transport. The implications of uncertainty with respect to fracture opening size and ground-water velocity is also discussed and it is shown that provided one can obtain a reasonable estimate of the hydraulic gradient and hydraulic conductivity for the rock mass, uncertainty regarding the magnitude of the opening size and the groundwater velocity does not have a significant effect on predicted contaminant migration for the class of problems being considered.  相似文献   

5.
A DNA tracer used in column tests for hydrogeology applications   总被引:1,自引:1,他引:0  
Tracing techniques are commonly used to investigate groundwater quality and dynamics, as well as to measure the hydrogeological parameters of aquifers. The last decade has seen a growing interest in environmentally friendly tracers, including single-stranded DNA molecules. In this study, an electrolytic tracer and a synthetic DNA tracer are comparatively evaluated in laboratory scale tests to assess their potential application in field studies aimed at investigating groundwater environments. A real-time quantitative Polymerase Chain Reaction assay was developed and optimized to detect and quantify the DNA tracer, while tracer column tests were performed to investigate the DNA tracer behavior and to compare it to the electrolytic tracer. The results show that the DNA tracer has an almost pure convective flow, while the KCl tracer experiences dispersive behavior. The tracing method proposed can be applied in hydrogeological field studies involving calcareous fractured rock systems, with the DNA tracer particularly suitable in tracing karst systems, which are often characterized by several conduits of flow. To test the DNA tracer in operation, a preliminary test was conducted in the field.  相似文献   

6.
Precipitation-dissolution reactions are important for a number of applications such as isotopic tracer transport in the subsurface. Analytical solutions have been developed for tracer transport in both single-fracture and multiple-fracture systems associated with these reactions under transient and steady-state transport conditions. These solutions also take into account advective transport in fractures and molecular diffusion in the rock matrix. For studying distributions of disturbed tracer concentration (the difference between actual concentration and its equilibrium value), effects of precipitation-dissolution reactions are mathematically equivalent to a “decay” process with a decay constant proportional to the corresponding bulk reaction rate. This important feature significantly simplifies the derivation procedure by taking advantage of the existence of analytical solutions for tracer transport associated with radioactive decay in fractured rock. It is also useful for interpreting tracer breakthrough curves, because the impact of a decay process is relatively easy to analyze. Several illustrative examples are presented, which show that the results are sensitive to fracture spacing, matrix diffusion coefficient (fracture surface area), and bulk reaction rate (or “decay” constant), indicating that the relevant flow and transport parameters may be estimated by analyzing tracer signals.  相似文献   

7.
A laboratory study was undertaken to determine the transport and deposition rate of suspended particles in columns of saturated porous media (gravel and glass beads), where the porous media were subjected to steady-state flow. Silt particles with a mode of 14 μm diameter (used as the suspended particles) and fluorescein (as the conservative tracer) were injected into the columns in short pulses. The breakthrough curves were competently described with the analytical solution of a convection–dispersion equation with a first-order deposition rate. The experiments were performed using different flow rates. The suspended particle size distribution, the porous media, and the flow rates themselves were the main factors retained in this study to investigate the mechanisms governing the transport and deposition kinetics in detail. The results showed the existence of a flow rate, beyond which suspended particles travel faster than the conservative tracer. A decrease of the deposition rate of suspended particles beyond a critical flow velocity was also observed. Such behaviour led to consideration of the couple hydrodynamic-gravity forces at high flow rates. As the hydrodynamic force increases, particle deposition rates are reduced due to the effect of hydrodynamic forces inhibiting the deposition.  相似文献   

8.
Analysis of contaminant transport through fractured crystalline rocks has received considerable attention, particularly with regard to subsurface nuclear waste repositories. Most of the studies have employed the dual continuum approach, with the fractures and the rock matrix as the two continuums, assuming that fractures control the overall conductivity of the rock and the porous matrix just provides storage. However, field observations of rock fractures have shown that the real situation can be very complex. Based on some recent investigations, it has been reported that the portion of the rock matrix adjacent to many open fractures is physically and chemically altered. These alterations, referred to as the fracture skin, can have different sorption and diffusion properties compared to those of the undisturbed rock matrix and this may influence the transport of solutes through such formations. In the present study, a numerical model is developed to simulate conservative solute transport in a fractured crystalline rock formation using the triple continuum approach ?? with the fracture, fracture skin and the rock matrix as the three continuums. The model is solved using a fully implicit finite difference scheme. Contaminant migration in the fractured formation with and without skin has been simulated. It is observed that contaminant penetration along the fracture is enhanced at large flow velocities. The effect of flow velocity on conservative solute transport is investigated for different fracture apertures and fracture skin thicknesses. The influence of flow velocity on contaminant transport is demonstrated to be more with change in fracture aperture than with change in skin thickness.  相似文献   

9.
In fractured-rock aquifers, the geometric and hydraulic properties of the fractures commonly have a dominant influence on transport. Tracer tests are often used to estimate directly the gross transport properties of a fractured rock mass. The prospects for understanding characteristics of the heterogeneities in a fractured porous medium were explored from evidence provided by tracer experiments. The approach was to simulate flow and transport on a large set of prescribed fracture networks in a two-dimensional homogeneous permeable medium, thus generating synthetic tracer test data. The fracture orientation, aperture, spacing and network geometry were systematically altered from one case to the next. A classification scheme was devised for the tracer breakthrough curves using principal component analysis and this classification was linked to the fracture pattern properties. Even under highly simplified and controlled conditions, quite different fracture patterns can produce very similar breakthrough curves. The classification scheme thus demonstrates that a single breakthrough curve cannot reveal the fracture geometry with any precision. However, the scheme provided a methodology for rejecting geometric properties that do not belong to the fracture pattern under investigation, thus reducing the uncertainty in fracture geometry.  相似文献   

10.
 Two multitracer tests performed in one of the major cross-fault zones of the Lange Bramke basin (Harz Mountains, Germany) confirm the dominant role of the fault zone in groundwater flow and solute transport. Tracers having different coefficients of molecular diffusion (deuterium, bromide, uranine, and eosine) yielded breakthrough curves that can only be explained by a model that couples the advective–dispersive transport in the fractures with the molecular diffusion exchange in the matrix. For the scale of the tests (maximum distance of 225 m), an approximation was used in which the influence of adjacent fractures is neglected. That model yielded nearly the same rock and transport parameters for each tracer, which means that the single-fracture approximation is acceptable and that matrix diffusion plays an important role. The hydraulic conductivity of the fault zone obtained from the tracer tests is about 1.5×10–2 m/s, whereas the regional hydraulic conductivity of the fractured rock mass is about 3×10–7 m/s, as estimated from the tritium age and the matrix porosity of about 2%. These values show that the hydraulic conductivity along the fault is several orders of magnitude larger than that of the remaining fractured part of the aquifer, which confirms the dominant role of the fault zones as collectors of water and conductors of fast flow. Received, April 1997 Revised, January 1998, August 1998 Accepted, August 1998  相似文献   

11.
We study in this paper the transport and deposition of suspended particles in saturated porous media. Some chromatographic short-pulse tests were performed in a laboratory column with a tracer and two types of suspended particles. A mathematical model was used to determine the hydrodispersive parameters and deposition rates from the breakthrough curves. The results show that the fitted parameters obtained vary with the flow rate and the characteristics of the suspended particles. We also observe, at high flow rates, that particles have a migration velocity higher than that of the conservative tracer. To cite this article: A. Benamar et al., C. R. Geoscience 337 (2005).  相似文献   

12.
Quantification of mass and heat transport in fractured porous rocks is important to areas such as contaminant transport, storage and release in fractured rock aquifers, the migration and sorption of radioactive nuclides from waste depositories, and the characterization of engineered heat exchangers in the context of enhanced geothermal systems. The large difference between flow and transport characteristics in fractures and in the surrounding matrix rock means models of such systems are forced to make a number of simplifications. Analytical approaches assume a homogeneous system, numerical approaches address the scale at which a process is operating, but may lose individual important processes due to averaging considerations. Numerical stability criteria limit the contrasts possible in defining material properties. Here, a hybrid analytical–numerical method for transport modeling in fractured media is presented. This method combines a numerical model for flow and transport in a heterogeneous fracture and an analytical solution for matrix diffusion. By linking the two types of model, the advantages of both methods can be combined. The methodology as well as the mathematical background are developed, verified for simple geometries, and applied to fractures representing experimental field conditions in the Grimsel rock laboratory.  相似文献   

13.
岩溶热储井间连通性的示踪研究   总被引:3,自引:0,他引:3       下载免费PDF全文
岩溶热储储层的不均匀性强,采灌井之间的连通性不易确定。示踪技术可以将运移参数量化,有效刻画储层流体的特征,研究回灌井和开采井之间的水力联系,包括导水通道,流体流速等信息,对长期回灌可能引起的开采井的冷却进行预测,是岩溶热储井间连通性研究十分有效的技术。本文以华北牛驼镇地热田雄县地区为例,针对蓟县系雾迷山组岩溶热储,采用荧光素钠示踪剂,进行了1口井注入,10口井观测的群井示踪试验。采用裂隙介质溶质运移模型,对示踪试验数据进行了解释,得到优势通道的长度、渗透流速、纵向弥散度、回收率等储层性质,获得了试验区内采灌井之间的连通特征。对调整采灌井布局提出了建议。  相似文献   

14.
为实现井—地激发极化数据的快速反演,分析三维有限元正演四面体网格剖分形成的系数矩阵的元素规律,应用MSR非零元素压缩存储和SSOR-PCG方程求解技术,提高了正演执行效率。在正演基础上,利用Jacobian矩阵与正演方程的简单关系,采用共轭梯度法求解最小二乘目标函数的模型修改量,避开Jacobian矩阵的直接计算和存储,实现了三维井-地激电数据的分钟级快速反演。模型正演合成数据的反演结果表明,能基本再现已知的模型。  相似文献   

15.
This paper deals with a new strategy for initial stress identification by stress relaxation methods, coupled with finite element calculation, and applied to the overcoring test. The back-analysis of such a test uses an inversion method which consists in the minimisation, with a gradient-based algorithm, of a cost functional of least-squares type, which quantizes the difference between measured and computed strains. The computed strains are assessed by three-dimensional finite element modellings of the overcoring test. The inversion methodology is applied to a recent in situ overcoring test performed at Mont Terri laboratory, Switzerland. The inversion gave good results and allows us to validate the inversion methodology. The constitutive law considered for this application is transverse isotropic elasticity but the inversion method developed is applicable to most constitutive laws and every kind of in situ test.  相似文献   

16.
1 IntroductionIncorporation of potentially toxic metals ( e.g.Cd, Cu, Cr, Pb, Hg, As, Se, Zn, Ni) into soils ei-ther through sewage-sludge irrigation or some othersources of pollution (e.g. atmospheric deposition, ap-plication of agri-chemicals) has posed…  相似文献   

17.
Tracer concentration data from field experiments conducted in several carbonate aquifers (Malaga province, southern Spain) were analyzed following a dual approach based on the graphical evaluation method (GEM) and solute transport modeling to decipher flow mechanisms in karst systems at regional scale. The results show that conduit system geometry and flow conditions are the principal factors influencing tracer migration through the examined karst flow routes. Solute transport is mainly controlled by longitudinal advection and dispersion throughout the conduit length, but also by flow partitioning between mobile and immobile fluid phases, while the matrix diffusion process appears to be less relevant. The simulation of tracer breakthrough curves (BTCs) suggests that diffuse and concentrated flow through the unsaturated zone can have equivalent transport properties under extreme recharge, with high flow velocities and efficient mixing due to the high hydraulic gradients generated. Tracer mobilization within the saturated zone under low flow conditions mainly depends on the hydrodynamics (rather than on the karst conduit development), which promote a lower longitudinal advection and retardation in the tracer migration, resulting in a marked tailing effect of BTCs. The analytical advection-dispersion equation better approximates the effective flow velocity and longitudinal dispersion estimations provided by the GEM, while the non-equilibrium transport model achieves a better adjustment of most asymmetric and long-tailed BTCs. The assessment of karst underground flow properties from tracing tests at regional scale can aid design of groundwater management and protection strategies, particularly in large hydrogeological systems (i.e. transboundary carbonate aquifers) and/or in poorly investigated ones.  相似文献   

18.
19.
核素在裂隙介质中的迁移问题是核废物深地质处置中极为关注的问题。为了解裂隙介质中核素的迁移规律,建立了基于双重介质理论的描述核素在裂隙域和基质域中迁移的基本微分方程,利用拉普拉斯变换推导出其解析解;在对西北某核废物处置场预选区地水文地质条件分析的基础上,获取相关参数,利用一维多途径核素迁移模型,选取国内在花岗岩中研究较多的核素Cs-134、Co-57、Tc-99,模拟这几种核素的相对浓度随模拟时间、迁移距离的变化规律。模拟结果表明:在其他条件都相同的情况下,Cs-134的迁移是最快的,而Tc-99迁移是最慢的。  相似文献   

20.
The unsaturated fractured volcanic deposits at Yucca Mountain in Nevada, USA, have been intensively investigated as a possible repository site for storing high-level radioactive waste. Field studies at the site have revealed that there exist large variabilities in hydrological parameters over the spatial domain of the mountain. Systematic analyses of hydrological parameters using a site-scale three-dimensional unsaturated zone (UZ) flow model have been undertaken. The main objective of the sensitivity analyses was to evaluate the effects of uncertainties in hydrologic parameters on modeled UZ flow and contaminant transport results. Sensitivity analyses were carried out relative to fracture and matrix permeability and capillary strength (van Genuchten α) through variation of these parameter values by one standard deviation from the base-case values. The parameter variation resulted in eight parameter sets. Modeling results for the eight UZ flow sensitivity cases have been compared with field observed data and simulation results from the base-case model. The effects of parameter uncertainties on the flow fields were evaluated through comparison of results for flow and transport. In general, this study shows that uncertainties in matrix parameters cause larger uncertainty in simulated moisture flux than corresponding uncertainties in fracture properties for unsaturated flow through heterogeneous fractured rock.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号