共查询到20条相似文献，搜索用时 93 毫秒
1.
三维复杂地形近地表速度估算及地震层析静校正 总被引：18，自引：6，他引：18
在地表一致性模型的基础上提出一种可适用于宽线剖面、弯曲测线、传统的二维和目前广泛使用的三维地震观测.在地形及近地表低降速带地质结构复杂的探区，低降速带厚度及速度估算的精度是静校正处理的关键.本研究根据三维地震观测的初至走时数据，利用最小平方与QR分解相结合的算法，在三维空间重建近地表低降速带速度模型，根据重建速度模型实现了静校正长波长分量与短波长分量的同步计算.分析了复杂的近地表低降速带模型初至波的性质，在观测值的自动拾取以及理论值的计算中充分考虑了可能成为初至波的直达波、折射波和反射波的利用，提高了低降速带速度模型反演的精度.在初至走时观测数据的拾取中，本研究采用分形算法克服了初至波波形差异以及折射波相位反转导致的拾取误差，实现了三维初至拾取的大规模全自动化运算.在射线路径与初至波理论走时的计算中，本研究采用一种计算量与模型复杂程度无关的三维射线追踪方法，该方法以最小走时射线路径保证了与观测数据有同等意义的初至波的射线追踪及理论走时的计算.野外实际资料的处理结果表明了方法的有效性. 相似文献
2.
3.
Determination of a shallow velocity–depth model from seismic refraction data by coherence inversion1
Seismic refractions have different applications in seismic prospecting. The travel- times of refracted waves can be observed as first breaks on shot records and used for field static calculation. A new method for constructing a near-surface model from refraction events is described. It does not require event picking on prestack records and is not based on any approximation of arrival times. It consists of the maximization of the semblance coherence measure computed using shot gathers in a time window along refraction traveltimes. Time curves are generated by ray tracing through the model. The initial model for the inversion was constructed by the intercept-time method. Apparent velocities and intercept times were taken from a refraction stacked section. Such a section can be obtained by appling linea moveout corrections to common-shot records. The technique is tested successfully on synthetic and real data. An important application of the proposed method for solving the statics problem is demonstrated. 相似文献
4.
Improving modelling and inversion in refraction seismics with a first-order Eikonal solver 总被引：1，自引：0，他引：1
Isabelle Lecomte Håvar Gjøystdal ers Dahle & Ole Christian Pedersen 《Geophysical Prospecting》2000,48(3):437-454
A first-order Eikonal solver is applied to modelling and inversion in refraction seismics. The method calculates the traveltime of the fastest wave at any point of a regular grid, including head waves as used in refraction. The efficiency, robustness and flexibility of the method give a very powerful modelling tool to find both traveltimes and raypaths. Comparisons with finite-difference data show the validity of the results. Any arbitrarily complex model can be studied, including the exact topography of the surface, thus avoiding static corrections. Later arrivals are also obtained by applying high-slowness masks over the high-velocity zones. Such an efficient modelling tool may be used interactively to invert for the model, but a better method is to apply the refractor-imaging principle of Hagedoorn to obtain the refractors from the picked traveltime curves. The application of this principle has already been tried successfully by previous authors, but they used a less well-adapted Eikonal solver. Some of their traveltimes were not correct in the presence of strong velocity variations, and the refractor-imaging principle was restricted to receiver lines along a plane surface. With the first-order Eikonal solver chosen, any topography of the receiving surface can be considered and there is no restriction on the velocity contrast. Based on synthetic examples, the Hagedoorn principle appears to be robust even in the case of first arrivals associated with waves diving under the refractor. The velocities below the refractor can also be easily estimated, parallel to the imaging process. In this way, the model can be built up successively layer by layer, the refractor-imaging and velocity-mapping processes being performed for each identified refractor at a time. The inverted model could then be used in tomographic inversions because the calculated traveltimes are very close to the observed traveltimes and the raypaths are available. 相似文献
5.
6.
Derecke Palmer 《Geophysical Prospecting》2006,54(5):589-604
The performance of refraction inversion methods that employ the principle of refraction migration, whereby traveltimes are laterally migrated by the offset distance (which is the horizontal separation between the point of refraction and the point of detection on the surface), can be adversely affected by very near‐surface inhomogeneities. Even inhomogeneities at single receivers can limit the lateral resolution of detailed seismic velocities in the refractor. The generalized reciprocal method ‘statics’ smoothing method (GRM SSM) is a smoothing rather than a deterministic method for correcting very near‐surface inhomogeneities of limited lateral extent. It is based on the observation that there are only relatively minor differences in the time‐depths to the target refractor computed for a range of XY distances, which is the separation between the reverse and forward traveltimes used to compute the time‐depth. However, any traveltime anomalies, which originate in the near‐surface, migrate laterally with increasing XY distance. Therefore, an average of the time‐depths over a range of XY values preserves the architecture of the refractor, but significantly minimizes the traveltime anomalies originating in the near‐surface. The GRM statics smoothing corrections are obtained by subtracting the average time‐depth values from those computed with a zero XY value. In turn, the corrections are subtracted from the traveltimes, and the GRM algorithms are then re‐applied to the corrected data. Although a single application is generally adequate for most sets of field data, model studies have indicated that several applications of the GRM SSM can be required with severe topographic features, such as escarpments. In addition, very near‐surface inhomogeneities produce anomalous head‐wave amplitudes. An analogous process, using geometric means, can largely correct amplitude anomalies. Furthermore, the coincidence of traveltime and amplitude anomalies indicates that variations in the near‐surface geology, rather than variations in the coupling of the receivers, are a more likely source of the anomalies. The application of the GRM SSM, together with the averaging of the refractor velocity analysis function over a range of XY values, significantly minimizes the generation of artefacts, and facilitates the computation of detailed seismic velocities in the refractor at each receiver. These detailed seismic velocities, together with the GRM SSM‐corrected amplitude products, can facilitate the computation of the ratio of the density in the bedrock to that in the weathered layer. The accuracy of the computed density ratio improves where lateral variations in the seismic velocities in the weathered layer are known. 相似文献
7.
A new algorithm for tomographic inversion of traveltimes of reflected and refracted seismic waves is developed. The inversion gives interface configurations and velocity distributions in layers. The important features of the algorithm are: (a) the inclusion of shot time delays in the list of unknown parameters; (b) the regularization is applied in such a way that the most probable model is characterized by the similarity of neighbouring interfaces. As the problem under consideration is non-linear, several iterations are necessary in order to obtain the final model. In the case of a very inexact initial model, a 'layer-by-layer' inversion strategy is recommended as a first inversion step. The inversion program is supplied with a user interface, thanks to which one can: (a) pick interactively and identify seismic traveltimes; (b) build and edit depth/velocity models; and (c) display calculated traveltime curves and compare them with picked traveltimes as well as with the original seismic sections. The efficiency of the inversion software developed is illustrated by a numerical example and a field example in which shallow seismic data are considered. Application to wide-aperture reflection/refraction profiling (WARRP) data is also possible. 相似文献
8.
全球造山带及中国大陆中西部普遍具有强烈起伏的地形条件.复杂地形条件下的地壳结构成像问题像一面旗帜引领了当前矿产资源勘探和地球动力学研究的一个重要方向.深地震测深记录中反射波的有效探测深度可达全地壳乃至上地幔顶部,而初至波通常仅能探测上地壳浅部.为克服和弥补初至波探测深度的不足,本文基于前人对复杂地形条件下初至波成像的已有研究成果,采用数学变换手段将笛卡尔坐标系的不规则模型映射到曲线坐标系的规则模型,并将快速扫描方法与分区多步技术相结合,发展了反射波走时计算和射线追踪的方法.进而利用反射波走时反演,实现起伏地形下高精度的速度结构成像,从而为起伏地形下利用反射波数据高精度重建全地壳速度结构提供了一种全新方案.数值算例从正演计算精度、反演中初始模型依赖性、反演精度、纵横向分辨率以及抗噪性等方面验证了算法的正确性和可靠性. 相似文献
9.
地震走时层析成像是反演地层各向异性参数分布的有效方法,但是关于地震各向异性介质走时层析成像的研究并不多,其技术远远没有达到成熟的阶段.在野外数据采集时,地表反射波观测方式相对井间和垂直地震剖面观测方式的成本更低,利用qP反射波走时反演各向异性参数具有更加广泛的实用价值.本文实现的TI介质地震走时层析成像方法结合了TI介质反射波射线追踪算法、走时扰动方程和非线性共轭梯度算法,它可以对任意强度的TI介质模型进行反演,文中尝试利用qP反射波走时重建TI介质模型的参数图像.利用qP反射波对层状介质模型和块状异常体模型进行走时反演,由于qP波相速度对弹性模量参数和Thomsen参数的偏微分不同,所以可以分别反演弹性模量参数和Thomsen参数.数值模拟结果表明:利用qP反射波可以反演出TI介质模型的弹性模量参数与Thomsen参数,不同模型的走时迭代反演达到了较好的收敛效果,与各向同性介质走时反演结果相比较,各向异性介质走时反演结果具有较好的识别能力. 相似文献
10.
地震走时层析成像方法是解决复杂近地表模型速度建模问题的重要技术.该方法是一种迭代反演方法,在反演过程中需要反复计算地震射线走时.故而,高效高精度且能适应复杂模型的走时计算方法是地震走时层析成像实用化的关键技术之一.本文引入医学成像领域研究的MSFM(Multi-stencils Fast Marching Methods)用于地震层析反演中的走时计算.该方法在标准FMM(Fast Marching Methods)基础上利用坐标旋转生成新的FMM计算模板,使计算网格点对角方向邻点参与计算,改善了标准FMM存在对角方向误差大的缺陷.本文分析对比了MSFM和标准FMM的计算精度和计算效率;针对地震层析成像技术解决的起伏地表模型建模问题,研究了起伏地表模型地震走时计算的MSFM实现方法;采用炮点邻近区域局部细分网格技术只需增加很少的计算量即可大幅提高计算精度.理论分析和模型试算表明MSFM算法明显改善了FMM的计算精度,同时保持了FMM算法的高效性.文章通过对崎岖地表模型的正演和层析反演试算,验证了基于MSFM的地震走时计算方法对复杂模型有很强的适应能力.研究表明该方法作为地震走时层析反演中高效高精度的正演算法,有很好的应用价值. 相似文献
11.
V.B. Piip 《Geophysical Prospecting》2001,49(4):461-482
A method using simple inversion of refraction traveltimes for the determination of 2D velocity and interface structure is presented. The method is applicable to data obtained from engineering seismics and from deep seismic investigations. The advantage of simple inversion, as opposed to ray‐tracing methods, is that it enables direct calculation of a 2D velocity distribution, including information about interfaces, thus eliminating the calculation of seismic rays at every step of the iteration process. The inversion method is based on a local approximation of the real velocity cross‐section by homogeneous functions of two coordinates. Homogeneous functions are very useful for the approximation of real geological media. Homogeneous velocity functions can include straight‐line seismic boundaries. The contour lines of homogeneous functions are arbitrary curves that are similar to one another. The traveltime curves recorded at the surface of media with homogeneous velocity functions are also similar to one another. This is true for both refraction and reflection traveltime curves. For two reverse traveltime curves, non‐linear transformations exist which continuously convert the direct traveltime curve to the reverse one and vice versa. This fact has enabled us to develop an automatic procedure for the identification of waves refracted at different seismic boundaries using reverse traveltime curves. Homogeneous functions of two coordinates can describe media where the velocity depends significantly on two coordinates. However, the rays and the traveltime fields corresponding to these velocity functions can be transformed to those for media where the velocity depends on one coordinate. The 2D inverse kinematic problem, i.e. the computation of an approximate homogeneous velocity function using the data from two reverse traveltime curves of the refracted first arrival, is thus resolved. Since the solution algorithm is stable, in the case of complex shooting geometry, the common‐velocity cross‐section can be constructed by applying a local approximation. This method enables the reconstruction of practically any arbitrary velocity function of two coordinates. The computer program, known as godograf , which is based on this theory, is a universal program for the interpretation of any system of refraction traveltime curves for any refraction method for both shallow and deep seismic studies of crust and mantle. Examples using synthetic data demonstrate the accuracy of the algorithm and its sensitivity to realistic noise levels. Inversions of the refraction traveltimes from the Salair ore deposit, the Moscow region and the Kamchatka volcano seismic profiles illustrate the methodology, practical considerations and capability of seismic imaging with the inversion method. 相似文献
12.
13.
初至波走时层析反演技术作为建立近地表速度模型的重要手段,是解决陆地资料复杂静校正问题的关键技术。而折射波广泛发育的海洋地震资料,对折射波信息的关注与运用并没有得到广泛的重视。本文首次将层析反演方法应用于海洋拖缆地震数据的近海底速度模型的建立。本文方法与陆地资料层析反演的主要区别在于:①在震源信号的最小相位化处理后进行初至时间的拾取,避免了混合相位子波初至拾取不准带来的误差;②以海水深度与海水速度作为反演约束条件,减小了迭代误差。实测二维资料的层析反演结果表明,本文方法可反演出较为精确的海洋地层速度结构。 相似文献
14.
First breaks of 2D deep reflection data were used to construct velocity-depth models for improved static corrections to a deeper datum level and for geological interpretations. The highly redundant traveltime data were automatically picked and transformed directly into a velocity-depth model by maximum depth methods such as the Giese- and the Slichter-method. Comparisons with the results of synthetic calculations and a tomographic approach using iterative inversion methods (ART, SIRT) showed that maximum depth methods provide reliable velocity models as a basis for the computation of static corrections. These methods can economically be applied during data acquisition in the field. They provide particularly long-period static anomalies, which are of the order of 20–40 ms (0.5-1 wavelength) within CMP gathers of an example of a deep reflection profile in SW-Germany sited on crystalline basement. Reprocessing of this profile, which was aimed at the comparison between the effects of the originally used and the new statics, did not result in dramatically improved stacking quality but showed a subtle influence on the detailed appearance of deep crustal events. 相似文献
15.
本文介绍了根据反射地震数据进行波速成象的一种方法,其基础为多种反演技术的综合。由于要求的波速图象C（x,z）具有间断性,除利用走时数据T（x,t）外,在地层比较水平的情况下,还利用了均方根速度V（x,t）和统计子波W（t）的数据来成象。计算机层析成象过程分为三步:首先重做速度分析,取得与初次反射走时一致的均方根速度数据;然后用反射走时与均方根速度联合反演对应分析道的层速度和界面深度;最后由联合反演结果和反射面走时求波速图象函数的数字化版。文中还给出了波速成象方法在我国西北某沉积盆地上的应用及验证结果。 相似文献
16.
17.
将遗传算法和单纯形算法相结合,得到了一种高效、健全的2D混合地震走时反演方法.把速度场划分为不同的空间尺度,定义网格节点上的速度作为待反演参数,采用双三次样条函数模型参数化,正问题采用有限差分走时计算方法,反问题采用多尺度混合反演方法.首先在较大的空间尺度内反演,然后减小空间尺度,将大尺度的反演结果作为次一级尺度反问题的初始模型,再进行混合反演,如此类推逐次逼近全局最优解.一个低速度异常体的数值模拟试验和抗走时扰动试验表明该方法是有效和健全的.我们将该方法应用到青藏高原东北缘阿尼玛卿缝合带东段上部地壳速度结构研究中,并与前人的成果进行了对比. 相似文献
18.
Heather Schijns Suvi Heinonen Douglas R. Schmitt Pekka Heikkinen Ilmo T. Kukkonen 《Geophysical Prospecting》2009,57(6):997-1008
A traveltime inversion technique is applied to model the upper ∼40 m of the subsurface of a glaciated shield rock area in order to calculate static corrections for a multi-azimuth multi-depth walk-away vertical seismic profile and a surface seismic reflection profile. First break information from a seismic refraction survey is used in conjunction with a ray-tracing program and an iterative damped least-squares inversion algorithm to create a two-dimensional model of the subsurface. The layout of the seismic survey required crooked seismic lines and substantial gaps in the source and receiver coverage to be accounted for. Additionally, there is substantial topographical variation and a complex geology consisting of glaciofluvial sediment and glacial till overlying a crystalline bedrock. The resolution and reliability of the models is measured through a parameter perturbation technique, normalized χ2 values, root means square traveltime residuals and comparison to known geology. 相似文献
19.
The ever-growing size of data sets for active and passive seismic imaging makes the availability of automatic procedures for rapid analysis more and more valuable. Such procedures are especially important for time-critical applications like emergency decisions or re-orienting of ongoing seismic surveys. In this paper a new, iterative scheme for 3D traveltime tomography is presented. The technique, based on a tool originally developed for earthquake data, uses cross-correlation to examine waveform similarity and to adjust arrival times on seismic sections. A preliminary set of reference arrival times is first corrected by the cross-correlation lag and then used to build an initial 3D tomographic velocity model through a standard inversion code; traveltimes calculated from this model are then taken as new reference arrivals and the process of pick adjustment is repeated. The result is a tomographic image, upgraded and refined at each iteration of the procedure. The test performed on the waveform data set recorded during the 2001 SERAPIS active seismic survey in the gulfs of Naples and Pozzuoli (Southern Italy) shows that the 3D iterative tomography scheme produces a velocity image of the structure of the Campi Flegrei caldera which is consistent with the results from previous studies, employing just a fraction of the time needed by a human analyst to identify first breaks. We believe that this technique can be effectively employed for rapid analysis of large data-sets within time-critical or time-dependent tasks and for automatic 4D tomographic investigations. 相似文献
20.
Robert Bloor 《Geophysical Prospecting》1996,44(2):197-213
The near-surface layer is modelled as a constant-velocity layer with varying thickness. The base of the layer is described by a B-spline curve. The optimum model is calculated by minimizing, with respect to the model parameters, the difference between traveltimes predicted by the model and those observed in the data. Once a model has been produced, corrections that are dependent on the raypath geometry through the near-surface layer can be calculated. The effect of the near-surface layer is normally considered to be consistent at each shot or geophone station for all traveltimes arriving at that location (the surface-consistent approximation). This assumption linearizes the problem, allowing timeshifts to be calculated and the traveltimes corrected to a chosen datum, representing static corrections. The single correction at each point is an averaged correction, based on an assumption that is particularly inaccurate in the presence of lateral variations of velocity or thickness of the surface layer, in the presence of large surface layer velocities or in the presence of a thick surface layer. The method presented considers the non-linear relationship between data and model explicitly, hence the correction that is dependent on the raypath. Linearization removes this dependence and reduces the problem to a surface-consistent approximation. The method is applied to synthetic data calculated from a model with surface layer variations. Comparisons are made between the corrected data resulting from the method described here and the conventional surface-consistent approach. From these results it becomes apparent that the near-surface layer inversion method presented here can reproduce accurate models and correct for near-surface layer effects in cases where conventional methods encounter difficulties. Additionally the method can be readily extended to 3D. 相似文献