首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The general nature of bulk flow within bedrock single‐channel reaches has been considered by several studies recently. However, the flow structure of a bedrock‐constrained, large river with a multiple channel network has not been investigated previously. The multiple channel network of the Siphandone wetlands in Laos, a section of the Mekong River, was modelled using a steady one‐dimensional hydraulic model. The river network is characterized by a spatially‐varying channel‐form leading to significant changes in the bulk flow properties between and along the channels. The challenge to model the bulk flow in such a remote region was the lack of ideal boundary conditions. The flow models considered both low flow, high inbank and overbank flows and were calibrated using SPOT satellite sensor imagery and limited field data concerning water levels. The application of the model highlighted flow characteristics of a large multi‐channel network and also further indicated the field data that would be required to properly characterize the flow field empirically. Important results included the observation that adjacent channels within the network had different water surface slopes for the same moments in time; thus calibration data for modelling similar systems needs to account for these significant local differences. Further, the in‐channel hydraulic roughness coefficient strongly varied from one cross‐section to the next (Manning's ‘n’ range: 0·01 to 0·10). These differences were amplified during low flow but persisted in muted form during high discharges. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

2.
This article presents results from an investigation of the hydraulic characteristics of overbank flows on topographically‐complex natural river floodplains. A two‐dimensional hydraulic model that solves the depth‐averaged shallow water form of the Navier–Stokes equations is used to simulate an overbank flow event within a multiple channel reach of the River Culm, Devon, UK. Parameterization of channel and floodplain roughness by the model is evaluated using monitored records of main channel water level and point measurements of floodplain flow depth and unit discharge. Modelled inundation extents and sequences are assessed using maps of actual inundation patterns obtained using a Global Positioning System, observational evidence and ground photographs. Simulation results suggest a two‐phase model of flooding at the site, which seems likely to be representative of natural floodplains in general. Comparison of these results with previous research demonstrates the complexity of overbank flows on natural river floodplains and highlights the limitations of laboratory flumes as an analogue for these environments. Despite this complexity, frequency distributions of simulated depth, velocity and unit discharge data closely follow a simple gamma distribution model, and are described by a shape parameter (α) that exhibits clear systematic trends with changing discharge and floodplain roughness. Such statistical approaches have the potential to provide the basis for computationally efficient flood routing and overbank sedimentation models. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

3.
Floods can destroy fish habitat. During a flood a fish has to seek shelters (refuges) to survive. It is necessary to know the maximum discharge that the fish can sustain against the strong current. Ecological and hydraulic engineers can simulate the flow condition of high flow for designing the refuge when restoring and enhancing the rivers are needed. Based on the average ratio of the mean and maximum velocities invariant with time, discharge and water level, this paper tries to introduce the concept of ecological high flow. The mean‐maximum velocity ratio can be used to estimate the mean velocity of the river. If the maximum velocity of the cross section is replaced by the maximum sustained swimming speeds of fish, the mean velocity of ecological high flow can be calculated with the constant ratio. The cross‐sectional area can be estimated by the gage height. Then the ecological high flow can be estimated as the product of mean velocity of ecological high flow multiplied by the cross‐sectional area. The available data of the upstream of the Dacha River where is the habitat of the Formosan landlocked salmon were used to illustrate the estimation of the ecological high flow. Any restoration project at Sonmou that try to improve the stream habitat can use the ecological high flow to design the hydraulic structure at suitable location to offer refuges for the Formosan landlocked salmon that is an endangered species in Taiwan Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

4.
In‐channel rock vane structures are widely used in stream restoration as a way to reduce stream channel erosion and create pool or riffle features. When these structures change hydraulic gradients they may affect ecological stream functions, such as hyporheic exchange flow (HEF) patterns. A study of constructed in‐channel structure controls on HEF was conducted in the third‐order Batavia Kill, New York using stream and hyporheic temperature amplitude analysis and computational fluid dynamics (CFD) hydraulic simulations. Temperature monitors were installed in the water column and channel bed at six locations around each of seven in‐channel restoration structures (three cross‐vanes and four J‐hooks) at baseflow in 2007. Elevation surveys of the structures were then used to simulate HEF using CFD. The results indicate a pattern of pronounced upwelling in the run section just below the structure, upwelling transitioning to downwelling within the pool, and pronounced downwelling in the glide out of the pool. This pattern is consistent with natural riffle pool sequences. The direction of HEF inferred from the temperature amplitude analysis agreed with the direction of flow simulated with CFD at 80% of the locations, and the few disagreements were expected due to model limitations. CFD simulation demonstrated that increasing stream flows result in changes in HEF spatial patterns and magnitude at each structure. This work illustrates how CFD simulations can guide design of in‐channel restoration structures for HEF function. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

5.
  相似文献   

6.
The distribution of particulate matter within river channels, including sediments, nutrients and pollutants, is fundamental to the survival of aquatic organisms. However, the interactions between flow and sediment transport at the patch scale of river systems represents an under‐researched component of physical habitat studies, particularly those concerning the characterization of ‘physical biotopes’ (riffles, runs, pools, glides). This paper describes a field methodology for exploring the transfer of particulate matter at small scales within river channels, which may be used to aid hydraulic habitat characterization. The field protocol combines field measurement of high frequency flow properties, to characterize hydraulic habitat units, and deployment of spatial arrays of turbidity probes, to detect the passage of artificially‐induced sediment plumes through different biotope units. Sediment plumes recorded by the probes are analysed quantitatively in the manner of the flood hydrograph, and qualitative inferences are made on the dominant mixing processes operating within different parts of the channel. Relationships between the nature of spatio‐temporal hydraulic variations within glide, riffle and pool biotopes, and the character and mixing behaviour of sediment plumes within these habitat units are identified. Results from these preliminary experiments suggest that investigating and characterizing the transfer and storage of sediments, nutrients and pollutants within and between different biotopes is a viable avenue for further research, with potential to contribute to improved physical habitat characterization for river management and habitat restoration. The experiments are also an illustration of the value of neglected synergies between process geomorphology, ecology and river hydraulics. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

7.
Submerged aquatic vegetation affects flow, sediment and ecological processes within rivers. Quantifying these effects is key to effective river management. Despite a wealth of research into vegetated flows, the detailed flow characteristics around real plants in natural channels are still poorly understood. Here we present a new methodology for representing vegetation patches within computational fluid dynamics (CFD) models of vegetated channels. Vegetation is represented using a Mass Flux Scaling Algorithm (MFSA) and drag term within the Reynolds‐averaged Navier–Stokes Equations, which account for the mass and momentum effects of the vegetation, respectively. The model is applied using three different grid resolutions (0.2, 0.1 and 0.05 m) using time‐averaged solution methods and compared to field data. The results show that the model reproduces the complex spatial flow heterogeneity within the channel and that increasing the resolution leads to enhanced model accuracy. Future applications of the model to the prediction of channel roughness, sedimentation and key eco‐hydraulic variables are presented, likely to be valuable for informing effective river management. © 2016 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.  相似文献   

8.
The distribution of Atlantic salmon redds was recorded during two spawning seasons (2005 and 2006) along a 4?km braided reach of the river Feshie in the Cairngorm mountains, Scotland. Within this complex reach, four main channels types were differentiated on the basis of geographical water sources, channel morphology and hydrochemistry: (1) the main braided channels of the river Feshie; (2) groundwater channels fed by seepage at the edge of the floodplain; (3) hillslope tributary channels and (4) mixed channels downstream of confluences of two or more of types 1?C3. The 2005 season was characterised by high and variable flows. In total, 223 redds were observed which were mainly (64%) located in groundwater channels, with relatively few (9%) in the more extensive sections of main channel. The second year had much lower and more stable flows. Here, a total of 337 redds were observed. The largest number were again located in the groundwater channels (44%), though spawning was more evenly distributed in the other channel types, including the main river (19%). It is hypothesised that the apparently more suitable characteristics of groundwater-fed channels relate to a more stable, richer environment for embryo development and juvenile growth, whilst hydraulic conditions and sediment stability in the main channel may create more adverse conditions for successful recruitment.  相似文献   

9.
Periods of summertime low flows are often critical for fish. This study quantified the impacts of forest clear‐cutting on summertime low flows and fish habitat and how they evolved through time in two snowmelt‐dominant headwater catchments in the southern interior of British Columbia, Canada. A paired‐catchment analysis was applied to July–September water yield, the number of days each year with flow less than 10% of mean annual discharge, and daily streamflow for each calendar day. The postharvest time series were divided into treatment periods of approximately 6–10 years, which were analysed independently to evaluate how the effects of forestry changed through time. An instream flow assessment using a physical habitat simulation‐style approach was used to relate streamflow to the availability of physical habitat for resident rainbow trout. About two decades after the onset of logging and as the extent of logging increased to approximately 50% of the catchments, reductions in daily summertime low flows became more significant for the July–September yield (43%) and for the analysis by calendar day (11–68%). Reductions in summertime low flows were most pronounced in the catchment with the longest postharvest time series. On the basis of the temporal patterns of response, we hypothesize that the delayed reductions in late‐summer flow represent the combined effects of a persistent advance in snowmelt timing in combination with at least a partial recovery of transpiration and interception loss from the regenerating forests. These results indicate that asymptotic hydrological recovery as time progresses following logging is not suitable for understanding the impacts of forest harvesting on summertime low flows. Additionally, these reductions in streamflow corresponded to persistent decreases in modelled fish habitat availability that typically ranged from 20% to 50% during the summer low‐flow period in one of the catchments, suggesting that forest harvest may have substantial delayed effects on rearing salmonids in headwater streams.  相似文献   

10.
We propose an improvement of the overland‐flow parameterization in a distributed hydrological model, which uses a constant horizontal grid resolution and employs the kinematic wave approximation for both hillslope and river channel flow. The standard parameterization lacks any channel flow characteristics for rivers, which results in reduced river flow velocities for streams narrower than the horizontal grid resolution. Moreover, the surface areas, through which these wider model rivers may exchange water with the subsurface, are larger than the real river channels potentially leading to unrealistic vertical flows. We propose an approximation of the subscale channel flow by scaling Manning's roughness in the kinematic wave formulation via a relationship between river width and grid cell size, following a simplified version of the Barré de Saint‐Venant equations (Manning–Strickler equations). The too large exchange areas between model rivers and the subsurface are compensated by a grid resolution‐dependent scaling of the infiltration/exfiltration rate across river beds. We test both scaling approaches in the integrated hydrological model ParFlow. An empirical relation is used for estimating the true river width from the mean annual discharge. Our simulations show that the scaling of the roughness coefficient and the hydraulic conductivity effectively corrects overland flow velocities calculated on the coarse grid leading to a better representation of flood waves in the river channels.  相似文献   

11.
Relative to those at sub‐bankfull flow, hydraulic conditions at overbank flow, whether in the channel or on the floodplain, are poorly understood. Here, velocity conditions are analysed over an unusually wide range of flows in the arid zone river of Cooper Creek with its complex system of anastomosing channels and large fluctuations in floodplain width. At‐a‐station hydraulic geometry relationships reveal sharp discontinuities in velocity at the inbank–overbank transition, the nature of the discontinuity varying with the degree of flow confinement and the level of channel–floodplain interaction. However, despite inter‐sectional differences, velocities remain modest throughout the flow range in this low‐gradient river, and the large increases in at‐a‐station discharge are principally accommodated by changes in cross‐sectional area. Velocity distribution plots suggest that within‐channel conditions during overbank flow are characterized by a central band of high velocity which penetrates far toward the bed, helping to maintain already deep cross‐sections. Floodplain resistance along Cooper Creek is concentrated at channel bank tops where vegetation density is highest, and the subsequent flow retardation is transmitted across the surface of the channels over distances as large as 50–70 m. The rough floodplain surface affects flood wave transmission, producing significant decreases in wave speeds downstream. The character of the wave‐speed–discharge relationship also changes longitudinally, from log–linear in the upper reaches to nonlinear where the floodplain broadens appreciably. The nonlinear form is similar in several respects to relationships proposed for more humid rivers, with flood wave speed reaching an intermediate maximum at about four‐fifths bankfull discharge before decreasing to a minimum at approximately Q2·33. It does not regain the value at the intermediate maximum until the 10 year flood, by which time floodplain depths have become relatively large and broad floodways more active. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

12.
We adopt a multidisciplinary approach toward the quantitative assessment of juvenile fish habitats in Alpine rivers using analytical modeling. The study focuses on braided and single-thread channel configurations together with their associated hydrodynamic patterns. A distinct difference between flows in these channels is the number and spatial arrangement of recirculation zones. These are due to the separation of flow from the river banks and result in a higher retention of flow in braided channels. Braided channels were also shown to provide more favourable shelter and nursing conditions for fish larvae and juveniles by mitigating high velocities during floods, by maintaining relatively shallow areas of flow, and by significant adjustments in the thermal regime. A historical analysis revealed a significant reduction of braided reaches along Alpine rivers that have most likely led to a significant degradation of the fish fauna.  相似文献   

13.
Tian Zhou  Ted Endreny 《水文研究》2012,26(22):3378-3392
River restoration projects have installed j‐hook deflectors along the outer bank of meander bends to reduce hydraulic erosion, and in this study we use a computational fluid dynamics (CFD) model to document how these deflectors initiate changes in meander hydrodynamics. We validated the CFD with streamwise and cross‐channel bankfull velocities from a 193° meander bend flume (inlet at 0°) with a fixed point bar and pool equilibrium bed but no j‐hooks, and then used the CFD to simulate changes to flow initiated by bank‐attached boulder j‐hooks (1st attached at 70°, then a 2nd at 160°). At bankfull and half bankfull flow the j‐hooks flattened transverse water surface slopes, formed backwater pools upstream of the boulders, and steepened longitudinal water slopes across the boulders and in the conveyance region off the mid‐channel boulder tip. Streamwise velocity and mass transport jets upstream of the j‐hooks were stilled, mid‐channel jets were initiated in the conveyance region, eddies with a cross‐channel axis formed below boulders, and eddies with a vertical axis were shed into wake zones downstream of the point bar and outer bank boulders. At half bankfull depth conveyance region flow cut toward the outer bank downstream of the j‐hook boulders and the secondary circulation cells were reshaped. At bankfull depth the j‐hook at 160° was needed to redirect bank‐impinging flow sent by the upstream j‐hook. The hooked boulder tip of both j‐hooks funneled surface flow into mid‐channel plunging jets, which reversed the secondary circulation cells and initiated 1 to 3 counter rotating cells through the entire meander. The main outer bank collision zone centered at 50° without the j‐hook was moved by the j‐hook to within and just beyond the 70° j‐hook boulder region, which displaced other mass transport zones downstream. J‐hooks re‐organized water surface slopes, streamwise and cross‐channel velocities, and mass transport patterns, to move shear stress from the outer bank and into the conveyance and mid‐channel zones at bankfull flow. At half bankfull flows a patch of high shear re‐attached to the outer bank below the downstream j‐hook. J‐hook geometry and placement within natural meanders can be analyzed with CFD models to help restoration teams reach design goals and understand hydraulic impacts. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

14.
This paper, the first of two, hypothesizes that: (1) the temporal variation of stream power of a river channel at a given station with varying discharge is accomplished by the temporal variation in channel form (flow depth and channel width) and hydraulic variables, including energy slope, flow velocity and friction; (2) the change in stream power is distributed among the changes in flow depth, channel width, flow velocity, slope, and friction, depending on the boundary conditions that the channels has to satisfy. The second hypothesis is a result of the principle of maximum entropy and the theory of minimum energy dissipation or its simplified minimum stream power. These two hypotheses lead to families of at‐a‐station hydraulic geometry relations. The conditions under which these families of relations can occur in the field are discussed. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

15.
Knowledge of locomotion of fish near river confluences is important for prediction of fish distribution in a river network.The flow separation zone near the confluence of a river network is a favorite habitat and feeding place for silver carp,which is one of the four major species of Chinese carp and usually provides positive rheotaxis to water flow.In the current study,a series of laboratory experiments were done to determine the behavioral responses of juvenile silver carp to the hydrodynamic ...  相似文献   

16.
Geomorphic and hydraulic units in river channels are closely linked to geodiversity and habitats, and thus to biodiversity. In a ~ 200 km reach of the lower Sabine River, in the northern Gulf of Mexico Coastal Plain, 72 different hydraulic units (HU) were identified in six geomorphic zones or river styles. Richness–area relationships indicate a linear or logarithmic increase of HUs, as opposed to the less steep power functions generally found in biogeographic species–area curves or in soil richness–area analyses. Different results are obtained when starting from the upstream or downstream end of the study area, indicating the importance of directionality in such analyses. These results show that HUs (and related habitats and biotopes) are both richer and more variable than a repeated sequence of units. The number of HUs inundated increases linearly with flow stage categories, indicating the importance of high within‐bank flows in maintaining and activating HUs. Aggregated HUs (AHUs) associated with similar geomorphic units are highly connected, both with respect to patterns of spatial adjacency and potential connectivity at similar flow levels. Spectral graph theory metrics applied to a graph representation of spatial adjacency shows a highly complex network with a high potential for rapid propagation of changes—and even more so for a graph based on flow connectivity. The flow connectivity graph shows far higher synchronization as indicated by algebraic connectivity. Thus suggests more rapid and coherent changes for processes driven by river flow, as opposed to phenomena driven by other factors between flow events. These findings have important implications for understanding relationships between geodiversity and habitat diversity, managing habitat and biodiversity, and linking the latter to instream flows. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

17.
This is the first substantial field measurement of river-bank erosion around fallen logs in rivers. Whilst numerous studies have established that living trees can stabilize river banks, and that fallen trees can cause scour of the river bed, knowledge of bank erosion effects from logs is largely restricted to qualitative observations. Recent flume studies suggest that a single log can increase near-bank velocity (and thus erosion) and this increase is related to the blockage ratio of the log and the distance between the log and bank. However, hydraulic interactions between logs can reduce this increase or even decrease the near-bank velocity. These theories, developed in a straight flume, have not been tested in the field. We measured erosion rates (relative to controls) on river banks adjacent to 35 large logs for 2 years, and velocity distributions around 11 logs during a near-bankfull flow in anabranching channels of the River Murray, SE Australia. These channels have abundant large instream logs, consistent bank material, and consistent regulated high flows. The field results generally supported the velocity changes caused by single and multiple logs in the flume studies, with single logs increasing near-bank velocity, but with the hydraulic interactions between successive logs tending to reduce this increase. Flow patterns caused by logs adjacent to curved banks were more complicated as the local effects of logs reinforced or weakened recirculating flows. Instream logs did not change overall, average, bank erosion rates, but they tended to shift the erosion from bank top to bank toe. However, individual logs increased or decreased bank erosion rates in patterns that generally concur with the near-bank velocity changes predicted in flume studies: that isolated logs increased erosion rates whilst hydraulically interacting logs did not increase erosion rates. © 2020 John Wiley & Sons, Ltd.  相似文献   

18.
Studies of the effects of hydrodynamic model dimensionality on simulated flow properties and derived quantities such as aquatic habitat quality are limited. It is important to close this knowledge gap especially now that entire river networks can be mapped at the microhabitat scale due to the advent of point‐cloud techniques. This study compares flow properties, such as depth and velocity, and aquatic habitat quality predicted from pseudo‐2D and fully 2D hydrodynamic modeling. The models are supported by high‐resolution, point‐cloud derived bathymetries, from which close‐spaced cross‐sections were extracted for the 1D modeling, of three morphologically and hydraulically different river systems. These systems range from small low‐gradient meandering pool–riffle to large steep confined plane‐bed rivers. We test the effects of 1D and 2D models on predicted hydraulic variables at cross‐sections and over the full bathymetry to quantify the differences due to model dimensionality and those from interpolation. Results show that streambed features, whose size is smaller than cross‐sectional spacing, chiefly determine the different results of 1D and 2D modeling whereas flow discharge, stream size, morphological complexity and model grid sizes have secondary effects on flow properties and habitat quality for a given species and life stage predicted from 1D and 2D modeling. In general, the differences in hydraulic variables are larger in the bathymetric than in the cross‐sectional analysis, which suggests that some errors are introduced from interpolation of spatially disaggregated simulated variables with a 1D model, instead of model dimensionality 1D or 2D. Flow property differences are larger for velocity than for water surface elevation and depth. Differences in weighted usable area (WUA) derived from 1D and 2D modeling are relatively small for low‐gradient meandering pool–riffle systems, but the differences in the spatial distribution of microhabitats can be considerable although clusters of same habitat quality are spatially comparable. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

19.
D. W. Crowder  P. Diplas   《Journal of Hydrology》2000,230(3-4):172-191
Modeling of flow features that are important in assessing stream habitat conditions has been a long-standing interest of stream biologists. Recently, they have begun examining the usefulness of two-dimensional (2-D) hydrodynamic models in attaining this objective. Current modeling practices consider relatively long channel sections with their bathymetry represented in terms of large, macro-scale, topographic features. Meso-scale topographic features, such as boulders, root-wads and other obstructions are typically not considered in the modeling process. Instead, the overall effects of these flow obstructions are captured through increased values in the channel roughness parameters. Such an approach to 2-D modeling allows one to accurately predict average depth and velocity values; however, it is not capable of providing any information about the flow patterns in the vicinity of these obstructions. Biologists though have known that such meso-scale features and the complex velocity patterns generated by their presence, play an important role in the ecology of streams, and thus cannot be ignored. It is therefore evident that there is a need to develop better tools, capable of modeling flow characteristics at scales of ecological importance. The purpose of this study is to expand the utility of 2-D hydraulic models to capture these flow features that are critical for characterizing stream habitat conditions.

There exists a paucity of research addressing what types of topographic features should be included in 2-D model studies and to what extent a boulder or series of exposed boulders can influence predicted flow conditions and traditional useable habitat computations. Moreover, little research has been performed to evaluate the impact mesh refinement has on model results in natural streams. Numerical simulations, based on a natural river channel containing several large boulders, indicate that explicitly modeling local obstructions/boulders can significantly impact predicted flow parameters. The presence of these obstructions create velocity gradients, velocity shelters, transverse flows and other ecologically important flow features that are not reproduced when their geometry is not incorporated into the hydraulic model. Sensitivity analyses show that reducing element sizes in the vicinity of obstructions and banks is crucial in modeling the spatial flow patterns created by meso-scale topographic features. This information, combined with similar data obtained in future studies, can provide guidelines for the placement of fishrocks and other structures often used in stream restoration projects as well as determining what types of meso-scale topographic features might need to be incorporated into habitat suitability studies. Such information may also ultimately allow new spatial habitat metrics to be developed.  相似文献   


20.
The impact of climate change on Arctic rivers is expected to be severe. There is therefore a need for greater understanding of Arctic river temperature processes. This study quantifies the spatio-temporal variability of water temperatures in the Kårsa River, Sweden. Water temperature was monitored over two summers within the main proglacial channel and within braids fed by different sources. Longitudinal and lateral temperature patterns were assessed in relation to prevailing hydro-meteorology. Temperature metrics in the main channel increased with distance downstream but were moderated by a large lake, while temperatures in the braids were dependent upon channel source. The high temperature standard deviation and inter-site differences within the braids highlight the importance of braided channels for creating thermal habitat heterogeneity. Temperatures were dependent on hydro-meteorological conditions, with sensitivity to air temperature maximized during cooler, rainy conditions. These results shed new light on Arctic river temperature patterns and their controlling processes.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号