首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
D. J. Booker 《水文研究》2003,17(3):577-599
In urban rivers, flow regime and channel morphology are the drivers of physical habitat quality for aquatic species. Peak discharges are increased at high flows as a result of impermeable catchments and channel engineering for flood protection schemes. Hazardous conditions and flashy hydrographs mean that measurement of velocities at high flows is a difficult task. This research uses a three‐dimensional computational fluid dynamics (3D‐CFD) model to simulate hydraulic patterns in two urban river channels. A 3D‐CFD code, called SSIIM, was used to simulate hydraulic conditions in two engineered river reaches of the River Tame, Birmingham, UK. These two sites represent channels with different levels of engineering. Models were calibrated and tested using field measurements. Results show that modelled water surface levels and velocity profiles are well simulated. Calibrated roughness heights are compared with those derived from field measurement of sediment size. Numerical experiments are used to assess the relationship between grid resolution in the vertical dimension and the form of the modelled velocity profiles. Biologists have used laboratory experiments to determine maximum sustainable swimming speeds (MSSS) of fish, often in order to assess what level of a particular pollutant may be tolerable. In this work, simulations of high‐flow hydraulic patterns are used to compare velocity patterns with fish MSSS. Results show that when the water levels rise to fill the first channel of the two‐stage channels at the sites, which occurred 16 times in 2000, MSSS are surpassed in the majority of available habitat, suggesting that excessive velocities at high flows are one factor that limits fish habitat. A comparison between the two reaches shows that there is less available habitat in the more modified reach. Conclusions suggest that an approach that integrates water quality issues and physical channel characteristics must be taken in river rehabilitation schemes, as improvements to water quality alone may not be sufficient to improve habitat quality to the desired level. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

2.
Geomorphic and hydraulic units in river channels are closely linked to geodiversity and habitats, and thus to biodiversity. In a ~ 200 km reach of the lower Sabine River, in the northern Gulf of Mexico Coastal Plain, 72 different hydraulic units (HU) were identified in six geomorphic zones or river styles. Richness–area relationships indicate a linear or logarithmic increase of HUs, as opposed to the less steep power functions generally found in biogeographic species–area curves or in soil richness–area analyses. Different results are obtained when starting from the upstream or downstream end of the study area, indicating the importance of directionality in such analyses. These results show that HUs (and related habitats and biotopes) are both richer and more variable than a repeated sequence of units. The number of HUs inundated increases linearly with flow stage categories, indicating the importance of high within‐bank flows in maintaining and activating HUs. Aggregated HUs (AHUs) associated with similar geomorphic units are highly connected, both with respect to patterns of spatial adjacency and potential connectivity at similar flow levels. Spectral graph theory metrics applied to a graph representation of spatial adjacency shows a highly complex network with a high potential for rapid propagation of changes—and even more so for a graph based on flow connectivity. The flow connectivity graph shows far higher synchronization as indicated by algebraic connectivity. Thus suggests more rapid and coherent changes for processes driven by river flow, as opposed to phenomena driven by other factors between flow events. These findings have important implications for understanding relationships between geodiversity and habitat diversity, managing habitat and biodiversity, and linking the latter to instream flows. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

3.
Because of the significant reduction of flow velocity relative to the main current there is an accumulation of sediment material in the centre of the groyne fields over time (years to decades) up to a maximum of 1.5 m. Based on the element‐ and compound‐specific depth functions of this fine‐grained material with high organic matter content the sedimentation history of the Elbe River sediments concerning the environmentally relevant nutrients and pollutants can be reconstructed. It could be shown that the fresh sediments are less polluted than the deeper older ones. During the extreme flood of the river Elbe in August 2002 the critical erosion shear stress in the groyne fields was high enough to remobilise a considerable portion of the sediment depot. The hazard to the environment is high due to the fact that a significant part of the remobilised polluted sediments was distributed over the recent floodplain which is normally used as pasture. Thus these groyne field sediments represent a temporary danger for the water quality of the river Elbe. But the hazard of the solids sedimented in the recent floodplain of the river can be viewed as long‐lasting.  相似文献   

4.
Aggregation processes of fine sediments have rarely been integrated in numerical simulations of cohesive sediment transport in riverine systems. These processes, however, can significantly alter the hydrodynamic characteristics of suspended particulate matter (SPM), modifying the particle settling velocity, which is one of the most important parameters in modelling suspended sediment dynamics. The present paper presents data from field measurements and an approach to integrate particle aggregation in a hydrodynamic sediment transport model. The aggregation term used represents the interaction of multiple sediment classes (fractions) with corresponding multiple deposition behaviour. The k–ε–turbulence model was used to calculate the coefficient of vertical turbulent mixing needed for the two‐dimensional vertical‐plane simulations. The model has been applied to transport and deposition of tracer particles and natural SPM in a lake‐outlet lowland river (Spree River, Germany). The results of simulations were evaluated by comparison with field data obtained for two levels of river discharge. Experimental data for both discharge levels showed that under the prevailing uniform hydraulic conditions along the river reach, the settling velocity distribution did not change significantly downstream, whereas the amount of SPM declined. It was also shown that higher flow velocities (higher fluid shear) resulted in higher proportions of fast settling SPM fractions. We conclude that in accordance with the respective prevailing turbulence structures, typical aggregation mechanisms occur that continuously generate similar distribution patterns, including particles that settle toward the river bed and thus mainly contribute to the observed decline in the total SPM concentration. In order to determine time‐scales of aggregation and related mass fluxes between the settling velocity fractions, results of model simulations were fitted to experimental data for total SPM concentration and of settling velocity frequency distributions. The comparison with simulations for the case of non‐interacting fractions clearly demonstrated the practical significance of particle interaction for a more realistic modelling of cohesive sediment and contaminant transport. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

5.
Pollution of coastal regions of the Great Barrier Reef World Heritage Area (GBRWHA) is dominated by river discharge associated with agricultural development of the adjacent catchments. Runoff of sediment, nutrients and pesticides has sharply increased since European settlement. Since 1991 plumes from river discharge entering the GBRWHA have been mapped by aerial mapping of plume edges and concentrations of contaminants in plumes measured. Plume dispersion is governed primarily by wind speed and direction. Most plumes spread in a band up to 50 km from the coast. Particulate material discharged in the plumes is trapped within 10 km of the coast. Dissolved nutrients disperse much further and elevated nutrient concentrations are measurable at distances of hundreds of kilometres from river mouths. This differential transport of particulate versus dissolved nutrients is important for the potential effects of these materials and management of their generation on the Great Barrier Reef catchment.  相似文献   

6.
Xunhong Chen 《水文研究》2011,25(2):278-287
Characterization of streambed hydraulic conductivity from the channel surface to a great depth below the channel surface can provide needed information for the determination of stream‐aquifer hydrologic connectedness, and it is also important to river restoration. However, knowledge on the streambed hydraulic conductivity for sediments 1 m below the channel surface is scarce. This study describes a method that was used to determine the distribution patterns of streambed hydraulic conductivity for sediments from channel surface to a depth of 15 m below. The method includes Geoprobe's direct‐push techniques and Permeameter tests. Direct‐push techniques were used to generate the electrical conductivity (EC) logs and to collect sequences of continuous sediment cores from river channels, as well as from the alluvial aquifer connected to the river. Permeameter tests on these sediment cores give the profiles of vertical hydraulic conductivity (Kv) of the channel sediments and the aquifer materials. This method was applied to produce Kv profiles for a streambed and an alluvial aquifer in the Platte River Valley of Nebraska, USA. Comparison and statistical analysis of the Kv profiles from the river channel and from the proximate alluvial aquifer indicates a special pattern of Kv in the channel sediments. This depth‐dependent pattern of Kv distribution for the channel sediments is considered to be produced by hyporheic processes. This Kv‐distribution pattern implied that the effect of hyporheic processes on streambed hydraulic conductivity can reach the sediments about 9 m below the channel surface. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

7.
Confluence–diffluence units are key elements within many river networks, having a major impact upon the routing of flow and sediment, and hence upon channel change. Although much progress has been made in understanding river confluences, and increasing attention is being paid to bifurcations and the important role of bifurcation asymmetry, most studies have been conducted in laboratory flumes or within small rivers with width:depth (aspect) ratios less than 50. This paper presents results of a field‐based study that details the bed morphology and 3D flow structure within a very large confluence–diffluence in the Río Paraná, Argentina, with a width:depth ratio of approximately 200. Flow within the confluence–diffluence is dominated largely by the bed roughness, in the form of sand dunes; coherent, channel‐scale, secondary flow cells, that have been identified as important aspects of the flow field within smaller channels, and assumed to be present within large rivers, are generally absent in this reach. This finding has profound implications for flow mixing rates, sediment transport rates and pathways, and thus the interpretation of confluence–diffluence morphology and sedimentology. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

8.
Many urban rivers receive significant inputs of metal‐contaminated sediments from their catchments. Restoration of urban rivers often creates increased slack water areas and in‐channel vegetation growth where these metal‐contaminated sediments may accumulate. Quantifying the accumulation and retention of these sediments by in‐channel vegetation in urban rivers is of importance in terms of the planning and management of urban river restoration schemes and compliance with the Water Framework Directive. This paper investigates sediment properties at four sites across three rivers within Greater London to assess the degree to which contaminated sediments are being retained. Within paired restored and unrestored reaches at each site, four different bed sediment patch types (exposed unvegetated gravel, sand, and silt/clay (termed ‘fine’) sediments, and in‐channel vegetated sediments) were sampled and analysed for a range of metals and sediment characteristics. Many samples were found to exceed Environment Agency guidelines for copper (Cu), lead (Pb) and zinc (Zn) and Dutch Intervention Values for Cu and Zn. At all sites, sediments accumulating around in‐channel vegetation were similar in calibre and composition to exposed unvegetated fine sediments. Both bed sediment types contained high concentrations of pseudo‐total and acetic acid extractable metal concentrations, potentially due to elevated organic matter and silt/clay content, as these are important sorbtion phases for metals. This implies that the changed sediment supply and hydraulic conditions associated with river restoration may lead to enhanced retention of contaminated fine sediments, particularly around emergent plants, frequently leading to the development of submerged and emergent landforms and potential river channel adjustments. High pseudo‐total metal concentrations were also found in gravel bed sediments, probably associated with iron (Fe) and manganese (Mn) oxyhydroxides and discrete anthropogenic metal‐rich particles. These results highlight the importance of understanding the potential effects of urban river restoration upon sediment availability and channel hydraulics and consequent impacts upon sediment contaminant dynamics and storage. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

9.
This paper explores changes in suspended sediment transport and fine sediment storage at the reach and patch scale associated with the reintroduction of partial large wood (LW) jams in an artificially over‐widened lowland river. The field site incorporates two adjacent reaches: a downstream section where LW jams were reintroduced in 2010 and a reach immediately upstream where no LW was introduced. LW pieces were organized into ‘partial’ jams incorporating several ‘key pieces’ which were later colonized by substantial stands of aquatic and wetland plants. Reach‐scale suspended sediment transport was investigated using arrays of time‐integrated suspended sediment samplers. Patch‐scale suspended sediment transport was explored experimentally using turbidity sensors to track the magnitude and velocity of artificially generated sediment plumes. Fine sediment storage was quantified at both reach and patch scales by repeat surveys of fine sediment depth. The results show that partial LW jams influence fine sediment dynamics at both the patch and reach scale. At the patch‐scale, introduction of LW led to a reduction in the concentration and increase in the time lag of released sediment plumes within the LW, indicating increased diffusion of plumes. This contrasted with higher concentrations and lower time lags in areas adjacent to the LW; indicating more effective advection processes. This led to increased fine sediment storage within the LW compared with areas adjacent to the LW. At the reach‐scale there was a greater increase in fine sediment storage through time within the restored reach relative to the unrestored reach, although the changes in sediment transport responsible for this were not evident from time‐integrated suspended sediment data. The results of the study have been used to develop a conceptual model which may inform restoration design. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

10.
An idealised model is presented and analysed to gain more fundamental understanding about the dynamics of phytoplankton blooms in well-mixed, suspended sediment dominated estuaries. The model describes the behaviour of subtidal currents, suspended sediments, nutrients and phytoplankton in a channel geometry. The initial growth of phytoplankton and its spatial distribution is calculated by solving an eigenvalue problem. The growth rates depend on the position in the estuary due to along-estuary variations in nutrient concentration and suspended sediment concentration. The model yields an insight into how the onset of blooms in the model depends on physical and biological processes (turbulent mixing, fresh water discharge, light attenuation, imposed nutrient concentrations at the river and sea side). In particular, the model demonstrates that the joint action of spatial variations in turbidity and in nutrients causes the maximum phytoplankton concentrations to occur seaward of the estuarine turbidity maximum.  相似文献   

11.
Excessive mobilization and delivery of fine sediments to water bodies has detrimental impacts on those biotic elements used for waterbody status classification, including macroinvertebrates, fish and macrophytes. The relationship between fine sediment and diatoms is a reciprocal one, with diatoms influencing the production and retention of fine sediments, as well as being impacted by fine sediment derived from the catchment. Diatoms can increase the retention of fine sediments in benthic environments as a result of various mechanisms, including shear stress modification, surface adhesion and bed clogging. Enhanced retention of fines can have important implications for the transfer and fate of sediment‐associated nutrients and contaminants. Excessive fine sediment loadings impact diatom assemblages via shading, burial and scouring. Indirect impacts of increased fine sediment stress can result from changes in habitat availability, herbivory or predator changes, which cascade down the food chain. Indices based on the relative abundance of motile species have been proposed for using diatoms to assess waterbody status. However, disentangling the potential confounding impacts of alternative environmental stressors on these simplistic indices remains a significant challenge. Coupling sediment pressure models, capable of predicting the potential impact of mitigation, with meaningful diatom‐based indices, remains a challenge for catchment planning for sediment abatement and the attainment of improved, or protection of, ecological status. Existing targets for sediment management in river catchments are largely based on relationships between sediment stress and impacts on fish, but these thresholds have been widely criticized. There remains a need to develop generic modelling toolkits coupling sediment stress and impacts on a range of biological quality elements to support a weight‐of‐evidence approach. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

12.
In this work, numerical modeling is used to evaluate and interpret a series of detailed and well‐controlled two‐dimensional bench‐scale conservative tracer tank experiments performed to investigate transverse mixing in porous media. The porous medium used consists of a fine matrix and a more permeable lens vertically aligned with the tracer source and the flow direction. A sensitivity analysis shows that the tracer distribution after passing the lens is only slightly sensitive to variations in transverse dispersivity, but strongly sensitive to the contrast of hydraulic conductivities. A unique parameter set could be calibrated to closely fit the experimental observations. On the basis of calibrated and validated model, synthetic experiments with different contrasts in hydraulic conductivity and more complex setups were performed and the efficiency of mixing evaluated. Flux‐related dilution indices derived from these simulations show that the contrasts in hydraulic conductivity between matrix and high‐permeable lenses as well as the spatial configuration of tracer plumes and lenses dominate mixing, rather than the actual pore scale dispersivities. These results indicate that local material distributions, the magnitude of permeability contrasts, and their spatial and scale relation to solute plumes are more important for macro‐scale transverse dispersion than the micro‐scale dispersivities of individual materials. Local material characterization by thorough site investigation hence is of utmost importance for the evaluation of mixing‐influenced or ‐governed problems in groundwater, such as tracer test evaluation or an assessment of contaminant natural attenuation.  相似文献   

13.
The mathematical model for simulating deformations of river channels composed of heterogeneous alluvium has been developed. The combination of shallow water equations and a three-layer model is used to describe the fluid flow and non-uniform sediment transport in bed (layer II) and suspended (layer III) loads. Changes in the fractional composition of unerodible bottom sediments (layer I) are also considered. The algorithm provides mass conservation for each fraction. The comparison of calculations results and experimental data (hydraulic washing of a desilting basin from sediments and armoring processes in heterogeneous soils) confirms the operability of the model. The model is applied to calculate the silting and hydraulic washes of the reservoir of a hydroelectric power station on a mountain river.  相似文献   

14.
Groundwater is a primary source of drinking water worldwide, but excess nutrients and emerging contaminants could compromise groundwater quality and limit its usage as a drinking water source. As such contaminants become increasingly prevalent in the biosphere, a fundamental understanding of their fate and transport in groundwater systems is necessary to implement successful remediation strategies. The dynamics of surface water-groundwater (hyporheic) exchange within a glacial, buried-valley aquifer system are examined in the context of their implications for the transport of nutrients and contaminants in riparian sediments. High conductivity facies act as preferential flow pathways which enhance nutrient and contaminant delivery, especially during storm events, but transport throughout the aquifer also depends on subsurface sedimentary architecture (e.g. interbedded high and low conductivity facies). Temperature and specific conductance measurements indicate extensive hyporheic mixing close to the river channel, but surface water influence was also observed far from the stream-aquifer interface. Measurements of river stage and hydraulic head indicate that significant flows during storms (i.e., hot moments) alter groundwater flow patterns, even between consecutive storm events, as riverbed conductivity and, more importantly, the hydraulic connectivity between the river and aquifer change. Given the similar mass transport characteristics among buried-valley aquifers, these findings are likely representative of glacial aquifer systems worldwide. Our results suggest that water resources management decisions based on average (base) flow conditions may inaccurately represent the system being evaluated, and could reduce the effectiveness of remediation strategies for nutrients and emerging contaminants.  相似文献   

15.
  相似文献   

16.
Observations of sediment dispersal from the Santa Clara River of southern California during two moderately sized river discharge events suggest that river sediment rapidly formed a negatively buoyant (hyperpycnal) bottom plume along the seabed within hours of peak discharge. An array of acoustic and optical sensors were placed at three stations 1 km from the Santa Clara River mouth in 10-m water depth during January–February 2004. These combined observations suggest that fluid mud concentrations of suspended sediment (>10 g/l) and across-shore gravity currents (∼5 cm/s) were observed in the lower 20–40 cm of the water column 4–6 h after discharge events. Gravity currents were wave dominated, rather than auto-suspending, and appeared to consist of silt-to-clay sized sediment from the river. Sediment mass balances suggest that 25–50% of the discharged river sediment was transported by these hyperpycnal currents. Sediment settling purely by flocs (∼1 mm/s) cannot explain the formation of the observed hyperpycnal plumes, therefore we suggest that some enhanced sediment settling from mixing, convective instabilities, or diverging plumes occurred that would explain the formation of the gravity currents. These combined results provide field evidence that high suspended-sediment concentrations from rivers (>1 g/l) may rapidly form hyperpycnal sediment gravity currents immediately offshore of river mouths, and these pathways can explain a significant portion of the river-margin sediment budget. The fate of this sediment will be strongly influenced by bathymetry, whereas the fate of the remaining sediment will be much more influenced by ocean currents.  相似文献   

17.
Submerged aquatic vegetation affects flow, sediment and ecological processes within rivers. Quantifying these effects is key to effective river management. Despite a wealth of research into vegetated flows, the detailed flow characteristics around real plants in natural channels are still poorly understood. Here we present a new methodology for representing vegetation patches within computational fluid dynamics (CFD) models of vegetated channels. Vegetation is represented using a Mass Flux Scaling Algorithm (MFSA) and drag term within the Reynolds‐averaged Navier–Stokes Equations, which account for the mass and momentum effects of the vegetation, respectively. The model is applied using three different grid resolutions (0.2, 0.1 and 0.05 m) using time‐averaged solution methods and compared to field data. The results show that the model reproduces the complex spatial flow heterogeneity within the channel and that increasing the resolution leads to enhanced model accuracy. Future applications of the model to the prediction of channel roughness, sedimentation and key eco‐hydraulic variables are presented, likely to be valuable for informing effective river management. © 2016 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.  相似文献   

18.
The long‐term evolution of channel longitudinal profiles within drainage basins is partly determined by the relative balance of hillslope sediment supply to channels and the evacuation of channel sediment. However, the lack of theoretical understanding of the physical processes of hillslope–channel coupling makes it challenging to determine whether hillslope sediment supply or channel sediment evacuation dominates over different timescales and how this balance affects bed elevation locally along the longitudinal profile. In this paper, we develop a framework for inferring the relative dominance of hillslope sediment supply to the channel versus channel sediment evacuation, over a range of temporal and spatial scales. The framework combines distinct local flow distributions on hillslopes and in the channel with surface grain‐size distributions. We use these to compute local hydraulic stresses at various hillslope‐channel coupling locations within the Walnut Gulch Experimental Watershed (WGEW) in southeast Arizona, USA. These stresses are then assessed as a local net balance of geomorphic work between hillslopes and channel for a range of flow conditions generalizing decadal historical records. Our analysis reveals that, although the magnitude of hydraulic stress in the channel is consistently higher than that on hillslopes, the product of stress magnitude and frequency results in a close balance between hillslope supply and channel evacuation for the most frequent flows. Only at less frequent, high‐magnitude flows do channel hydraulic stresses exceed those on hillslopes, and channel evacuation dominates the net balance. This result suggests that WGEW exists mostly (~50% of the time) in an equilibrium condition of sediment balance between hillslopes and channels, which helps to explain the observed straight longitudinal profile. We illustrate how this balance can be upset by climate changes that differentially affect relative flow regimes on slopes and in channels. Such changes can push the long profile into a convex or concave condition. © 2018 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.  相似文献   

19.
Riverine sediments have played an important role in the morphological evolution of river channels and river deltas. However, the sediment regime in the many world's rivers has been altered in the context of global changes. In this study, temporal changes in the sediment regime of the Pearl River were examined at different time scales, that is, annual, seasonal, and monthly time scales, using the Mann–Kendall test. The results revealed that precipitation variability was responsible for monthly and seasonal distribution patterns of the sediment regime and the long‐term changes in the water discharge; however, dam operation has smoothed the seasonal distribution of water discharge and resulted in decreasing trends in the annual, wet‐season, and dry‐season sediment load series since the 1950s. Due to the different regulation magnitudes of dam operation, differences were observed in sediment regime changes among the three tributaries. In addition, human activities have altered the hysteresis of seasonal rating curves and affected hysteresis differences between increasing and decreasing water discharge stages. Sediment supply is an important factor controlling river channel dynamics, affecting channel morphology. From the 1950s to the 1980s, siltation was dominant in river channels across the West River and North River deltas in response to the sediment increases; however, scouring occurred in the East River deltas due to sediment reduction. Significant erosion occurred in river channels in the 1990s, which was mostly due to downcutting of the river bed caused by sand excavations and partly because of the reduced sediment load from upstream. Although sand excavations have been banned and controlled by authority agencies since 2000, the erosion of cross sections was still observed in the 2000s because of reduced sediment caused by dam construction. Our study examines the different effects of human activities on the sediment regime and downstream channel morphology, which is of substantial scientific importance for river management.  相似文献   

20.
Earth scientists have traditionally conceptualized rivers and streams as geomorphic machines, whose role is to transfer sediment and to sculpt the landscape. Steady‐state relationships between sediment supply and transport capacity have traditionally been considered normative in fluvial systems. Rivers are hydrological entities, however, whose function is to redistribute excess moisture on land. The geomorphic work of the river – erosion, transport, deposition, etc. – is a byproduct of the hydrological job of the river. There is therefore no reason to expect any particular relationship between sediment supply and transport capacity to develop as a normative condition in fluvial systems. The apparent steady‐state equilibrium slope adjustments of rivers are a byproduct of four basic phenomena: (1) hydraulic selection, which favors channels and branching networks over other flux patterns; (2) water flows along the available path of least resistance; (3) energy dissipation; and (4) finite relaxation times. Recognizing converging trends of stream power or slope and sediment supply as common (but far from inevitable) side effects rather than self‐regulation has important implications for interpreting and predicting fluvial systems, and for river management and restoration. Such trends are variable, transient, contingent, and far from universal. Where they occur, they are an emergent byproduct of fundamental physical mechanisms, not a goal function or attractor state. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号