共查询到20条相似文献，搜索用时 15 毫秒
1.
2.
鄂尔多斯晚三叠世湖盆异重流沉积新发现 总被引：15，自引：4，他引：11
水下重力流沉积作为重要的油气储层,已成为当前学术研究和油气工业共同关注的焦点.在鄂尔多斯盆地南部延长组长7~长6油层组深湖相沉积中,发现一种不同于砂质碎屑流沉积和滑塌浊积岩的重力流成因砂岩.其沉积特征为一系列向上变粗的单元(逆粒序层)和向上变细的单元(正粒序层)成对出现;每一个粒序层组合内部的泥质含量变化(高-低-高)与粒度变化一致;上部正粒序层与下部逆粒序层之间可见层内微侵蚀界面;砂岩与灰黑色纯泥岩、深灰色粉砂质泥岩互层;粉砂质泥岩层内也表现出类似的粒度变化特征.通过岩芯观察和薄片鉴定,认为该岩石组合形成于晚三叠世深湖背景下的异重流(hyperpycnal flow)沉积.其沉积产物--hyperpycnite(异重岩?)以发育逆粒序和层内微侵蚀面而区别于其它浊积岩,逆粒序代表洪水增强期的产物,上部的正粒序层为洪水衰退期的沉积,逆粒序-正粒序的成对出现代表一次洪水异重流事件沉积旋回;层内微侵蚀面是洪峰期流速足以对同期先沉淀的逆粒序沉积层侵蚀造成的.鄂尔多斯盆地延长组异重岩的发现,不仅为探索陆相湖盆环境下的异重流沉积提供了一个范例,而且对于深水砂体成因研究、储层预测和油气勘探具有理论和现实意义. 相似文献
3.
4.
This paper presents a model of facies distribution within a set of early Cretaceous, deep‐lacustrine, partially confined turbidite fans (Sea Lion Fan, Sea Lion North Fan and Otter Fan) in the North Falkland Basin, South Atlantic. As a whole, ancient deep‐lacustrine turbidite systems are under‐represented in the literature when compared with those documented in marine basins. Lacustrine turbidite systems can form extensive, good quality hydrocarbon reservoirs, making the understanding of such systems crucial to exploration within lacustrine basins. An integrated analysis of seismic cross‐sections, seismic amplitude extraction maps and 455 m of core has enabled the identification of a series of turbidite fans. The deposits of these fans have been separated into lobe axis, lobe fringe and lobe distal fringe settings. Seismic architectures, observed in the seismic amplitude extraction maps, are interpreted to represent geologically associated heterogeneities, including: feeder systems, terminal mouth lobes, flow deflection, sinuous lobe axis deposits, flow constriction and stranded lobe fringe areas. When found in combination, these architectures suggest ‘partial confinement’ of a system, something that appears to be a key feature in the lacustrine turbidite setting of the North Falkland Basin. Partial confinement of a system occurs when depositionally generated topography controls the flow‐pathway and deposition of subsequent turbidite fan deposits. The term ‘partial confinement’ provides an expression for categorising a system whose depositional boundaries are unconfined by the margins of the basin, yet exhibit evidence of internal confinement, primarily controlled by depositional topography. Understanding the controls that dictate partial confinement; and the resultant distribution of sand‐prone facies within deep‐lacustrine turbidite fans, is important, particularly considering their recent rise as hydrocarbon reservoirs in rift and failed‐rift settings. 相似文献
5.
Deepwater/deep-marine turbidite lobes are the most distal part of a siliciclastic depositional system and hold the largest sediment accumulation on the seafloor. As many giant hydrocarbon provinces have been discovered within deepwater lobe deposits, they represent one of the most promising exploration targets for hydrocarbon industry. Deepwater exploration is characterized by high cost, high risk but insufficient data because of the deep/ultra–deepwater depth. A thorough understanding of the deepwater turbidite lobe architecture, hierarchy, stacking pattern and internal facies distribution is thus vital. Recently, detailed outcrop characterizations and high–resolution seismic studies have both revealed that the deepwater lobe deposits are characterized into four–fold hierarchical arrangements from "beds", to "lobe elements", to "lobes" and to "lobe complex". Quantitative compilations have shown that hierarchical components of lobe deposits have similar length to width ratios but different width to thickness ratios depending on different turbidite systems. At all hierarchical scales, sand–prone hierarchical lobe units are always separated by mud–prone bounding units except when the bounding units are eroded by their overlying lobe units thus giving rise to vertical amalgamation and connectivity. Amalgamations often occur at more proximal regions suggesting high flow energy. A mixed flow behavior may occur towards more distal regions, resulting in deposition of "hybrid event beds". These synthesized findings could(1) help understand the lobe reservoir distribution and compartmentalization therefore benefit the exploration and development of turbidite lobes within the deep marine basins(e.g. South China Sea) and(2) provide rules and quantitative constraints on reservoir modeling. In addition, the findings associated with deepwater turbidite lobes might be a good starting point to understand the sedimentology, architecture and hierarchy of turbidites in deep lacustrine environment. 相似文献
6.
Depositional architecture and evolution of progradationally stacked lobe complexes in the Eocene Central Basin of Spitsbergen 总被引：1，自引：0，他引：1
Sten‐Andreas Grundvåg Erik P. Johannessen William Helland‐Hansen Piret Plink‐Björklund 《Sedimentology》2014,61(2):535-569
The down‐dip portion of submarine fans comprises terminal lobes that consist of various gravity flow deposits, including turbidites and debrites. Within lobe complexes, lobe deposition commonly takes place in topographic lows created between previous lobes, resulting in an architecture characterized by compensational stacking. However, in some deep water turbidite systems, compensational stacking is less prominent and progradation dominates over aggradation and lateral stacking. Combined outcrop and subsurface data from the Eocene Central Basin of Spitsbergen provide a rare example of submarine fans that comprise progradationally stacked lobes and lobe complexes. Evidence for progradation includes basinward offset stacking of successive lobe complexes, a vertical change from distal to proximal lobe environments as recorded by an upward increase in bed amalgamation, and coarsening and thickening upward trends within the lobes. Slope clinoforms occur immediately above the lobe complexes, suggesting that a shelf‐slope system prograded across the basin in concert with deposition of the lobe complexes. Erosive channels are present in proximal axial lobe settings, whereas shallow channels, scours and terminal lobes dominate further basinward. Terminal lobes are classified as amalgamated, non‐amalgamated or thin‐bedded, consistent with turbidite deposition in lobe axis, off‐axis and fringe settings, respectively. Co‐genetic turbidite–debrite beds, interpreted as being deposited from hybrid sediment gravity flows which consisted of both turbulent and laminar flow phases, occur frequently in lobe off‐axis to fringe settings, and are rare and poorly developed in channels and axial lobe environments. This indicates bypass of the laminar flow phase in proximal settings, and deposition in relative distal unconfined settings. Palaeocurrent data indicate sediment dispersal mainly towards the east, and is consistent with slope and lobe complex progradation perpendicular to the NNW–SSE trending basin margin. 相似文献
7.
Turbidite depositional architecture across three interconnected deep-water basins on the north-west African margin 总被引：1，自引：0，他引：1
Russell B. Wynn Philip P. E. Weaver Douglas G. Masson Dorrik A. V. Stow 《Sedimentology》2002,49(4):669-695
ABSTRACT The Moroccan Turbidite System (MTS) on the north‐west African margin extends 1500 km from the head of the Agadir Canyon to the Madeira Abyssal Plain, making it one of the longest turbidite systems in the world. The MTS consists of three interconnected deep‐water basins, the Seine Abyssal Plain (SAP), the Agadir Basin and the Madeira Abyssal Plain (MAP), connected by a network of distributary channels. Excellent core control has enabled individual turbidites to be correlated between all three basins, giving a detailed insight into the turbidite depositional architecture of a system with multiple source areas and complex morphology. Large‐volume (> 100 km3) turbidites, sourced from the Morocco Shelf, show a relatively simple architecture in the Madeira and Seine Abyssal Plains. Sandy bases form distinct lobes or wedges that thin rapidly away from the basin margin and are overlain by ponded basin‐wide muds. However, in the Agadir Basin, the turbidite fill is more complex owing to a combination of multiple source areas and large variations in turbidite volume. A single, very large turbidity current (200–300 km3 of sediment) deposited most of its sandy load within the Agadir Basin, but still had sufficient energy to carry most of the mud fraction 500 km further downslope to the MAP. Large turbidity currents (100–150 km3 of sediment) deposit most of their sand and mud fraction within the Agadir Basin, but also transport some of their load westwards to the MAP. Small turbidity currents (< 35 km3 of sediment) are wholly confined within the Agadir Basin, and their deposits pinch out on the basin floor. Turbidity currents flowing beyond the Agadir Basin pass through a large distributary channel system. Individual turbidites correlated across this channel system show major variations in the mineralogy of the sand fraction, whereas the geochemistry and micropalaeontology of the mud fraction remain very similar. This is interpreted as evidence for separation of the flow, with a sand‐rich, erosive, basal layer confined within the channel system, overlain by an unconfined layer of suspended mud. Large‐volume turbidites within the MTS were deposited at oxygen isotope stage boundaries, during periods of rapid sea‐level change and do not appear to be specifically connected to sea‐level lowstands or highstands. This contrasts with the classic fan model, which suggests that most turbidites are deposited during lowstands of sea level. In addition, the three largest turbidites on the MAP were deposited during the largest fluctuations in sea level, suggesting a link between the volume of sediment input and the magnitude of sea‐level change. 相似文献
8.
Well-exposed, vertically dipping, glacially polished outcrops of the Neoproterozoic Windermere Supergroup in the southern Canadian Cordillera include basin-floor deposits of the Upper Kaza Group overlain by slope channel complexes of the Isaac Formation. Within the 2·5 km thick Kaza and Isaac succession is an up to 360 m thick interval composed of diverse deep-water stratal elements including scour and interscour deposits, distributary channels, fine-grained turbidites, terminal splays, mass-transport deposits, erosional and levéed channels and avulsion splays, which collectively were formed during the development of an ancient passive-margin channel-lobe system. The proportion and vertical and lateral arrangement of stratal elements reveal three distinct complexes. The lower complex, consisting mostly of distributary channels and small and large scours, is interpreted to represent the detachment of lobes from an upflow levéed channel, wherein a well-developed channel-lobe transition zone was formed by efficient, siliciclastic flows during a period of sustained transport bypass and limited deposition coincident with the onset of falling relative sea level. The middle, comparatively thicker and more sandstone-rich complex, comprises distributary channel fills, fine-grained turbidites and lesser terminal splays that are interspersed with small scours, capped by a slope levéed channel filled with coarser-grained siliciclastic sediment. The abundance of basin-floor elements suggests negligible separation between the levéed channel and lobe, and therefore a poorly-developed channel-lobe transition zone, resulting from inefficient, siliciclastic-rich depositional flows that became dominant during lowstand and/or ensuing transgression. The stratal makeup of the upper complex resembles the lower detached complex, suggesting a return to efficient flows, and an abrupt change to mixed carbonate–siliciclastic sediments associated with highstand conditions. Accordingly, the stratigraphic architecture and stacking pattern of the Kaza–Isaac interval, which relate to the formation of multiple channel-lobe transition zones, were controlled by temporal changes in sediment supply and flow characteristics during the long-term progradation of the Laurentian continental margin. 相似文献
9.
Sedimentology and evolution of the Martinsburg Formation (Upper Ordovician) fine-grained turbidite depositional system, central Appalachians 总被引：1，自引：0，他引：1
GARY G. LASH 《Sedimentology》1988,35(3):429-447
The Upper Ordovician Martinsburg Formation of eastern Pennsylvania consists of mudstone, siltstone, and sandstone turbidites that accumulated in a tectonically active foreland basin. The mudstone-rich Bushkill Member, the stratigraphically lowest unit of the Martinsburg in this area, grades upward into approximately equal proportions of mudstone, siltstone, and sandstone of the Ramseyburg Member. Many of the turbidites of these units are arranged in small-scale (1–9 m) fining-upward sequences that are interpreted as reflecting the influence of external or allocyclic controls such as variations in the local rate of sea-level rise and/or variations in the intensity of tectonic activity in shelf/nearshore or hinterland areas rather than more commonly cited autocyclic mechanisms. The thick (approximately 2000 m) Bushkill-Ramseyburg coarsening-upward sequence records progradation of a muddy turbidite depositional system along the axis of the foreland basin. Although this sequence accumulated during a Caradocian eustatic rise in sea-level, sedimentation rates landward of the shoreline were apparently great enough to allow for long-term seaward progradation of the shelf source. The paucity of depositional lobe-like facies (coarsening-upward sequences) in the Bushkill Member allows for tentative comparison of the progradational Bushkill-Ramseyburg system with the active fan lobe of the Mississippi Fan. Progradation of the Bushkill-Ramseyburg system ceased abruptly when mudstone turbidites and laminated black shale of the upper unit of the Martinsburg, the Pen Argyl Member, accumulated. The great thickness of some mudstone turbidite beds of the Pen Argyl Member is interpreted to record topographic confinement of the central Appalachian foreland basin, which may have helped to preclude continued progradation of the Bushkill-Ramseyburg turbidite system. 相似文献
10.
Through an analysis of their coarse-grain composition (>63 μm), pumice-rich sandy layers from deep sea cores were identified as shelf-derived turbidites rather than deposits due to ash rain or drifting pumice. A comparison of median sizes of individual grain types and total samples yielded significant vertical and horizontal sorting trends, which allowed apparently unrelated samples from different cores to be grouped into proximal and distal parts of one turbidite type. A discrimination of samples belonging to unrelated turbidite layers was also possible. In addition, whatever the grain size, planktonic molluscs and foraminifera have Md-diameters 1·1–2·75 times larger than those of pumice. Weathered shallow-water skeletals have Md-diameters approximately equal to pumice, whereas those of augite and hornblende are 1·25–2·3 times smaller. This results in a different proportion of components in proximal and distal turbidite samples. The Md-values of planktonic foraminifera reach their upper natural limit at 250–350 μm. 相似文献
11.
Recognition of cyclic steps in sandy and gravelly turbidite sequences,and consequences for the Bouma facies model 总被引：2，自引：0，他引：2
Preservation of cyclic steps contrasts markedly with that of subcritical‐flow bedforms, because cyclic steps migrate upslope eroding their lee face and preserving their stoss side. Such bedforms have not been described from turbidite outcrops and cores as yet. A conceptual block diagram for recognition of cyclic steps in outcrop has been constructed and is tested by outcrop studies of deep water submarine fan deposits of the Tabernas Basin in south‐eastern Spain. Experimental data indicate that depositional processes on the stoss side of a cyclic step are controlled by a hydraulic jump, which decelerates the flow and by subsequent waxing of the flow up to supercritical conditions once more. The hydraulic jump produces a large scour with soft‐sediment deformation (flames) preserved in coarse‐tail normal‐graded structureless deposits (Bouma Ta), while near‐horizontal, massive to stratified top‐cut‐out turbidite beds are found further down the stoss side of the bedform. The architecture of cyclic steps can best be described as large, up to hundreds of metres, lens‐shaped bodies that are truncated by erosive surfaces representing the set boundaries and that consist of nearly horizontal lying stacks of top‐cut‐out turbidite beds. The facies that characterize these bedforms have traditionally been described as turbidite units in idealized vertical sequences of high‐density turbidity currents, but have not yet been interpreted to represent bedforms produced by supercritical flow. Their large size, which is in the order of 20 m for gravelly and up to hundreds of metres for sandy steps, is likely to have hindered their recognition in outcrop so far. 相似文献
12.
The Middle Albian Ondarroa turbidite system is a coarse grained, deep water unit which outcrops in the north-eastern part of the Basque-Cantabrian region, west of the Pyrenees. It is about 18 km long and 7 km wide, and shows an unusual ‘L’shape resulting from both a direct morphotectonic confinement and the presence of nearby shallow water carbonate buildups. Eight main facies have been distinguished within this turbidite system: (1) clast-supported conglomerates; (2) mud-supported conglomerates; (3) slump deposits; (4) normally graded pebbly sandstones; (5) cross stratified sandstones; (6) interbedded graded sandstones and mudstones; (7) interbedded non-graded sandstones and mudstones: and (8) mudstones. Inner system, middle system, outer system and basin plain divisions have been distinguished. The inner turbidite system is characterized by stacked channel fill conglomerates and lesser sandy turbidites and mudstones. The middle system consists of sandy and conglomeratic fining upwards sequences, normally several metres thick. The outer system has alternating non-channellized sandstones and mudstones, without any predictable vertical arrangement. The basin plain is characterized by mudstone-siltstone laminations and lesser, randomly occurring thin bedded sandy turbidites. Three main channel fills make up the inner turbidite system. Although all of them can be compared with the valley channel fills of the modern Mississippi Fan, and thus their bases can be interpreted as sequence boundaries, only the lowermost and the uppermost channel bases are documented as allocyclic boundaries. The Ondarroa turbidite system was deposited in an immature passive margin subjected to transtensional movements. It filled a composite pull apart depression with coarse clastics derived from a narrow platform to the north of the present outcrops which was invaded by fan deltas. A major pattern of sinistral strike-slip faulting linked to the opening of the Bay of Biscay is invoked to explain the Ondarroa turbidite system appearance and its tectonic confinement. 相似文献
13.
Based on an unusual data set comprises bathymetric data, backscatter imagery, seismic-reflection and Chirp profiles, and sediment cores, the Late Quaternary lobe at the mouth of the youngest turbidite channel off the western Nile deep-sea fan was investigated. The large-scale construction of the lobe through time and space is mainly controlled by 1) a pre-existing topography inherited from the downslope movement of Messinian evaporites, and 2) the type and nature of gravity flows delivered to the basin floor. The margins of the lobe are defined by high-backscatter acoustic facies that contrasts strongly with the low-backscatter facies from the surrounding abyssal-plain deposits. Within the lobe, low-backscatter facies characterise the main channel-levee systems and lobate bodies immediately beyond the end of the channels. Cores reveal that the high-backscatter facies corresponds to a series of extensive but thin debris-flow deposits with a fingered margin. These debrites comprise a muddy-sand matrix and dispersed clasts with diameter of 5 to 10 cm. The lower backscatter facies at channel mouths corresponds to alternations of thin sandy turbidites and muddy hemipelagites. Extensive thin debris flows therefore traversed surprisingly low gradients to reach the distal fringes of the lobe complex but are never found in the lobate bodies just beyond the channel mouths. Although the Nile deep-sea fan is considered as a silt/mud-rich accumulation, sand-prone deposits exist within the lobe. This sand/mud segregation results either from the presence of channelized features in the lobe and/or from the hydrodynamic process of particle transport by debris flows and turbulent flows. 相似文献
14.
15.
藏北那曲盆地中—上侏罗统拉贡塘组浊流沉积特征及微量元素地球化学 总被引：6，自引：0，他引：6
藏北那曲地区中上侏罗统拉贡塘组发育典型的深水浊流沉积,根据浊积岩鲍马序列和粒度特征,可以进一步将其区分为近源砂质浊积岩和远源细屑浊积岩。微量及稀土元素地球化学研究表明,拉贡塘组浊积岩富集Cr、Co、Sc、Th等元素,无Ce负异常或负异常不明显,沉积物物源主要来自于变质岩区或再循环的沉积岩分布区。那曲盆地是冈底斯中生代多岛弧盆系统的组成部分之一,中上侏罗世深水浊流沉积形成于活动大陆边缘中的弧后盆地环境,该弧后盆地的形成与班公湖怒江中特提斯洋盆的洋壳向南的俯冲作用有关。 相似文献
16.
The Antola Formation of Upper Cretaceous age crops out extensively in the Northern Apennines and consists of graded units of calcareous sandstones, sandstones, marlstones, and shales. It can be subdivided into the Cerreto, Antola Marlstone, Bruggi, and S. Donato Members on the basis of bed thicknesses and percentage of shales. Although the whole formation is interpreted as a deep-sea basin plain deposit, the members constitute lateral facies subdivisions which range from proximal, thick-bedded turbidities that show a prevalence of thinning upward cycles in bed thicknesses to distal turbidites that show predominantly thickening upward cycles and have a high percentage of shale. Repetitive patterns in the lithological sequence of the turbidite association are generally distinctive and are satisfactorily described as first order Markov chains. Only the Antola Marlstone Member has an additional second order Markov property. Imaginary eigenvalues of the transition probability matrices of all but the Bruggi Member demonstrate a strong cyclic character in the lithologic ordering within the formation. The behaviour of the Antola Marlstone and of the Bruggi may reflect the influence of a secondary ophiolitic intra-basinal source of clastics that contributed sandy turbidites and olistostromes. Systematic long-term variations in the sequence of bed thickness development in some sections of the Antola Formation are often subtle and equivocal, and pose special problems in interpretation. Fourier analysis was applied to the task of partitioning fundamental wavelengths from “background noise” introduced by essentially random depositional processes. In all members there is (1) strong short-term wavelength of two to three beds indicative of alternating thin and thick beds and judged to be typical of turbidite sequences; (2) an intermediate wavelength ranging from about five beds (proximal facies), eight beds (distal) to nine beds (very distal), which have both thinning and thickening upward trends, interpreted respectively as valley fill due to shifting talwegs of low density turbidity currents, and to progradational, flat turbidite lobes; (3) a poorly defined long-term wave-length of from thirty to greater than sixty beds that may be related to an unspecified trend in the evolution of the sedimentary basin. Phase angles associated with the coniputed power spectra give indications as to the asymmetry (thickening or thinning upward) or symmetry of the representative units. 相似文献
17.
DAVID I. M. MACDONALD 《Sedimentology》1986,33(2):243-259
Determination of geographically dependent sedimentological variation (‘proximality’) in ancient flysch deposits formed an important part of early turbidite studies. Attempts to quantify this variation highlighted anomalies which were neatly resolved by application of vertical sequence analysis and the use of fan models. However, there are many turbidite formations, such as the Lower Cretaceous Cumberland Bay Formation (CBF) of South Georgia, which cannot be described in terms of existing fan models but show strong proximal to distal sedimentological changes. The CBF is a thick sequence of volcaniclastic sandstone turbidites deposited in a linear back-arc basin, principally by currents flowing WNW, parallel to the basin margin. Four lithofacies associations are recognized on the basis of sandstone/shale ratio. The two finergrained associations are constant in character across the CBF outcrop. In the coarse-grained associations there is a change in character WNW, down the palaeocurrent direction. This is brought out by decreasing sandstone bed thickness and percentage amalgamation, but these changes are not always marked or consistent. In contrast, the internal character of the sandstone beds changes strongly, with a marked proportional increase in Tb and Tc divisions within the bed downcurrent. The evidence suggests that the system was aggradational rather than progradational: tectonic control of the basin margins prevented major migration of the depositional system, and most areas remained in the same position relative to source through time. Comparison of the CBF with other turbidite formations suggests two end-member states which will produce radically different vertical sequences. Progradational systems will produce strong vertical facies changes, where beds deposited in distal environments are overlain by beds deposited in environments progressively nearer source, however there will be no lateral change in the character of any particular facies type. In contrast in aggradational systems the major sedimentological variation will be lateral rather than vertical. 相似文献
18.
Turbidite depositional patterns and flow characteristics, Navy Submarine Fan, California Borderland 总被引：6，自引：0，他引：6
The late Pleistocene and Holocene stratigraphy of Navy Fan is mapped in detail from more than 100 cores. Thirteen 14C dates of plant detritus and of organic-rich mud beds show that a marked change in sediment supply from sandy to muddy turbidites occurred between 9000 and 12,000 years ago. They also confirm the correlation of several individual depositional units. The sediment dispersal pattern is primarily controlled by basin configuration and fan morphology, particularly the geometry of distributary channels, which show abrupt 60° bends related to the Pleistocene history of lobe progradation. The Holocene turbidity currents are depositing on, and modifying only slightly, a relict Pleistocene morphology. The uppermost turbidite is a thin sand to mud bed on the upper-fan valley levées and on parts of the mid-fan. Most of its sediment volume is in a mud bed on the lower fan and basin plain downslope from a sharp bend in the mid-fan distributary system. Little sediment occurs farther downstream within this distributary system. It appears that most of the turbidity current overtopped the levée at the channel bend, a process referred to as flow stripping. The muddy upper part of the flow continued straight down to the basin plain. The residual more sandy base of the flow in the distributary channel was not thick enough to maintain itself as gradient decreased and the channel opened out on to the mid-fan lobe. Flow stripping may occur in any turbidity current that is thick relative to channel depth and that flows in a channel with sharp bends. Where thick sandy currents are stripped, levée and mid-fan erosion may occur, but the residual current in the channel will lose much of its power and deposit rapidly. In thick muddy currents, progressive overflow of mud will cause less declaration of the residual channelised current. Thus both size and sand-to-mud ratio of turbidity currents feeding a fan are important factors controlling morphologic features and depositional areas on fans. The size-frequency variation for different types of turbidity currents is estimated from the literature and related to the evolution of fan morphology. 相似文献
19.
Carbonate turbidite sequences deposited in rift-basins of the Jurassic Tethys Ocean (eastern Alps, Switzerland) 总被引：1，自引：0，他引：1
GREGOR P. EBERLI 《Sedimentology》1987,34(3):363-388
Syn-rift sediments in basins formed along the future southern continental margin of the Jurassic Tethys ocean, comprise, in the eastern Alps of Switzerland, up to 500 m thick carbonate turbidite sequences interbedded with bioturbated marls and limestones. In the fault-bounded troughs no submarine fans developed; in contrast, the fault scarps acted as a line source and the asymmetric geometry as well as the evolution of the basin determined the distribution of redeposited carbonates. The most abundant redeposits are bio- and lithoclastic grainstones and packstones, with sedimentary structures indicating a wide range of transport mechanisms from grain flow to high- and low-density turbidity currents. Huge chaotic megabreccias record catastrophic depositional events. Their main detrital components are Upper Triassic shallow-water carbonates and skeletal debris from nearby submarine highs. After an event of extensional tectonism, sedimentary prisms accumulated in the basins along the faults. Each prism is wedge-shaped with a horizontal upper boundary and consists of a thinning- and fining-upward megacycle. Within each megacycle six facies associations are distinguished. At the base of the fault scarp, an association of breccias was first deposited by submarine rockfall and rockfall avalanches. A narrow, approximately 4000 m wide depression along the fault was subsequently filled by the megabreccia association, in which huge megabreccias interfinger with thin-bedded turbidites and hemipelagic limestones. The thick-bedded turbidite association covered the megabreccias or formed, farther basinward, the base of the sedimentary column. Within the thick-bedded turbidites, thinning- and fining-upward cycles are common. The overlying thin-bedded turbidite association shows nearly no cyclicity and the monotonous sequence of fine-grained calciturbidites covers most of the basin area. With continuous filling and diminishing sediment supply, a basin-plain association developed comprising fine-grained and thin-bedded turbidites intercalated with bioturbated marls and limestones. On the gentle slopes opposite the fault escarpment, redeposited beds are scarce and marl/limestone alternations as well as weakly nodular limestones prevail. 相似文献
20.
B.Z. Xian J.H. Wang J.P. Liu Y.L. Dong C.L. Gong Z.Y. Lu 《Australian Journal of Earth Sciences》2018,65(1):135-151
Sediment avalanche from delta ramp is one of the significant development mechanisms for a turbidite system in a lacustrine basin. To advance our understanding of deep-water sedimentary processes in a lacustrine delta ramp, delta-fed turbidites in the Eocene Dongying depression of the Bohai Bay Basin were studied using core data, 3-D seismic data and well log data. Sandy debris flows, muddy debris flows, mud flows, turbidity currents, slides, sandy slumps and muddy slumps were interpreted based on the identification of lithofacies. Data indicates that deep-water sedimentary processes in the study area were dominated by debris flows and slumps, which accounted for ～68% and 25% (in thickness) of total gravity flow deposits, respectively; turbidity-current deposits only accounted for ～5%. Mapping of turbidites showed that most were deposited after short-distance transportation (<20 km), restricted by the scale of deep-water areas and local topography. Channels, depositional lobes, debris flow tongues, muddy turbiditic sheets, slides and slumps were identified in a delta-fed ramp system. Slides and slumps were dominant at the base of slopes or at the hanging walls of growth faults with strong tectonic activity. Channels and depositional lobes developed in gentle, low-lying areas, where sediments were transported longer distances. Sand-rich sediment supply, short-distance transportation and local topography were crucial factors that controlled sedimentation of this ramp system. Channels generally lacked levees and only produced scattered sandstones because of possible hydroplaning of debris flow and unstable waterways. In addition to lobes, debris flow tongues could also be developed in front of channels. These findings have significant implications for hydrocarbon exploration of deep-water sandstone fed by deltas in a lacustrine basin. 相似文献