共查询到20条相似文献，搜索用时 93 毫秒
1.
海岸线是海洋的重要组成部分,对于海域管理具有重要意义。本文根据岸线位置确定原理,即将多时相瞬时水边线上边界近似作为海岸线,提出了一种基于多时相水边线的海岸线自动提取方法,该方法应用区域生长与边缘检测相结合的方法提取瞬时水边线,然后采用海岸线自动判别算法进行海岸线的提取。首先计算归一化水体指数（normalized difference water index,NDWI）图像,利用区域生长算法进行海陆分割,得到海陆分割二值图;然后利用Canny边缘检测对海陆分割结果进行边缘检测,得到瞬时水边线;最后利用海岸线自动判别算法得到多时相瞬时水边线上界作为海岸线。本文以马六甲海峡部分海岸作为研究区域,应用多期Landsat 8遥感影像进行了海岸线提取和分析。为验证海岸线提取精度,对获取时间接近高潮时的一景哨兵二号影像进行目视解译得到人工解译的海岸线,与本文提取海岸线进行对比。结果显示,本文算法得到的海岸线平均偏移量和均方根误差分别为21.01 m和21.96 m,能够满足30 m分辨率遥感图像的精度要求,相比采用单景影像提取海岸线,精度有明显提高。 相似文献
2.
厦门海岸线遥感动态监测研究 总被引：4，自引：0，他引：4
海岸线是指多年大潮高潮位时的海陆界线。不同类型海岸有各自的地貌特征，它们在遥感影像上的解译标志与提取方法也存在差异。目前大部分海岸线自动提取研究只是解译出遥感影像中的水边线，即卫星在过顶时刻所记录的海水与陆地的瞬时交界线，并不是真正意义上的海岸线。本文以厦门地区海岸影像为研究对象，根据不同海岸类型的地貌特点采用不同的海岸线解译方法，提取出1987年、1997年和2007年的海岸线，并进行岸线变迁原因分析。实践表明：人工海岸、基岩海岸、砂质海岸及红土海岸的海岸线解译标志明显，提取效果较好，基本能够实现计算机自动提取；淤泥质海岸在遥感图像上呈现复杂的边缘，仍没有理想的线性特征自动提取技术，是海岸线提取中的难点。 相似文献
3.
4.
海岸线对于海岸带保护与管理具有重要意义。海岸线现场测绘施测周期长且在地形复杂的区域施测难度大,基于遥感影像的海岸线判绘对解译人员的要求高,难以获取严格意义的海岸线。针对上述问题,本文提出一种基于机载LiDAR与潮汐推算的自然岸线遥感提取方法:基于机载LiDAR系统获取的航空正射影像解译瞬时水边线,应用LiDAR系统提取的DEM和建立的高程系统转换模型,通过潮汐数据推算研究区域的海岸线。通过与“908专项”航空遥感调查岸线结果比对,按本文方法所提取的3种自然岸线(砂质岸线、基岩岸线和淤泥质岸线)的均方根误差分别为1.66,5.23和32.48 m。结果表明,该方法可用于砂质岸线和基岩岸线的提取,且具有无需开展现场测量工作的优势,可提高海岸线提取的效率。 相似文献
5.
6.
准确提取海岸水边线是海岸线变迁研究中必不可少的基本工作。本文以海南省陵水黎族自治县2016年的GF-2影像为数据源,在大气校正和正射校正等预处理的基础上,结合数学形态学处理等方法,采用NDWI（Normalized Difference Water Index）阈值法、ISOADTA（Iterative Self-Organizing Data Analysis Technique Algorithm）、SVM（Support Vector Machine）和面向对象法（Object-Oriented Classification,OOC）等四种不同方法来对海岸水边线进行提取,并对其提取结果进行定性和定量评估,进而分析比较了这四种方法在提取人工海岸、砂质海岸和基岩海岸等三种不同海岸类型的水边线时的提取效果和提取精度。结果表明,SVM方法在三种海岸水边线上的总体提取效果最好,总体提取精度最高。 相似文献
7.
8.
9.
海岸线是海岛海岸带研究的基础要素,对于海岸带资源开发利用具有重要意义。遥感技术凭借其宏观、多光谱且周期短等特点成为快速提取海岸线的重要技术手段。本文采用高分辨率遥感数据WorldView-2对海岸线两侧地物的表观反射率进行分析,并开展特征分析,构建了海岸线提取指数。在此基础上,进一步结合纹理特征提取方法,成功提取了马来西亚棉花岛的海岸线。基于线目标匹配法对提取结果进行精度评价,其中长度误差为-1.38%,在缓冲半径为6个像素单位时,完整度为96.96%,正确度为95.37%。结果表明,用该方法提取的海岸线精度较高,可满足遥感调查的需要。 相似文献
10.
基于多光谱数据的黄河三角洲岸线自动提取 总被引：3，自引：1，他引：2
基于多光谱数据对海岸线自动提取的问题研究已久。针对国内外岸线提取方法较为单一的现状,提出兼顾光谱特征与空间关系的海岸线自动提取方法:将2014年黄河三角洲Landsat8-OLI影像与实测地物反射率光谱对比,选择敏感波段建立提取模型,之后对研究岸段进行分类并自动提取,同时基于908专项山东省修测海岸线标准的目视解译方法对实验部分的海岸线进行提取,最后通过ROC曲线原则对提取结果分别进行0.5与1像元精度评价,实验证明该方法在1个像元精度(提取置信度均高于90%)范围内能快速、准确地提取黄河三角洲复杂地貌类型地区的海岸线,所得到的矢量岸线可直接用于地理信息系统(GIS)分析。 相似文献
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
13.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
14.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
15.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
16.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
20.