共查询到20条相似文献，搜索用时 140 毫秒
1.
Rock formations in Glutenite reservoirs typically display highly variable lithology and permeability, low and complex porosity, and significant heterogeneity. It is difficult to predict the pathway of hydraulic fractures in such rock formations. To capture the complex hydraulic fractures in rock masses, a numerical code called Rock Failure Process Analysis (RFPA2D) is introduced. Based on the characteristics of a typical Glutenite reservoir in China, a series of 2D numerical simulations on the hydraulic fractures in a small-scale model are conducted. The initiation, propagation and associated stress evolution of the hydraulic fracture during the failure process, which cannot be observed in experimental tests, are numerically simulated. Based on the numerical results, the hydraulic fracturing path and features are illustrated and discussed in detail. The influence of the confining stress ratio, gravel sizes (indicated by the diameter variation), and gravel volume content (VC) on the hydraulic fracturing pattern in a conglomerate specimen are numerically investigated, and the breakdown pressure is quantified as a function of these variables. Five hydraulic fracturing modes are identified: termination, deflection, branching (bifurcation), penetration, and attraction. The propagation trajectory of the primary hydraulic fractures is determined by the maximum and minimum stress ratios, although the fracturing path on local scales is clearly influenced by the presence of gravels in the conglomerate, particularly when the gravels are relatively large. As the stress ratio increases, the fractures typically penetrate through the gravels completely rather than propagating around the gravels, and the breakdown pressure decreases with increasing stress ratio. Furthermore, the breakdown pressure is affected by the size and volume content of the gravel in the conglomerate: as the gravel size and volume content increase, the breakdown pressure increases. 相似文献
2.
储层岩体中的天然结构面对水力压裂缝网改造具有重要的影响。本文采用真实破裂过程分析软件RFPA2D-Flow,在考虑岩体非均质性和岩体渗流-应力-损伤破裂特性的基础上,对不同尺度天然结构面影响的水力压裂裂缝扩展与演化行为进行了模拟分析和讨论,研究结果表明:（1）当水力裂缝遇天然非闭合裂隙时,在水力裂缝靠近非闭合裂隙区间形成拉张应力区,水力裂缝与区间非闭合裂隙间微元体累进性张拉破坏是导致水力裂缝与非闭合裂隙贯通的主要机制;（2）层理等优势结构对水力压裂裂缝扩展及缝网形态影响十分显著,当最大主应力方向与层理面走向小角度相交时,层理结构面对水力裂隙的扩展起主要作用,当最大主应力方向与层理面走向大角度相交时,最大主压应力与层理面共同对缝网扩展起主导作用,随着优势结构面的增多和差应力的增大,水力压裂形成的缝网范围和复杂性程度随之增大;（3）储层水力压裂是一种局部范围内的短暂动力扰动过程,尽管断层的存在可以极大地影响水力裂缝的扩展模式,增大水力裂隙扩展高度,但相比于储层埋深,水力压裂对断层封闭性的破坏范围和断层活动性的扰动程度十分有限。 相似文献
3.
水力压裂可显著提高页岩气等致密储层岩体的渗透性以增加油气产量,然而受多因素影响,水力压裂形成缝网结构的机理和压裂优化设计一直是研究的焦点和难点。本研究基于渗流-应力-破坏耦合计算模拟方法,对不同水力加载条件下的非均质储层水力压裂过程进行了模拟和对比研究。研究结果表明:水力压裂过程中起始注水压力和增量大小对水力压裂缝网扩展和改造区域形态有着显著的影响。当起始注水压力小于等于模型材料体抗拉强度,并缓慢增压致裂时,压裂过程可近似视为稳态应力-破坏-渗流耦合作用过程的不同阶段,这种情况下仅在压裂井孔周围形成两组对称式的伞状水力裂缝带。当对模型体施加高于模型材料体破裂压力的注水压力时,相当于对压裂孔快速施加高动水压力,水力裂缝沿压裂孔全方位迅速萌生并快速扩展,当注水压力值高于破裂压力一定幅值时,压裂改造可形成围绕压裂井全方位的放射状裂缝网络,使压裂储层得以最大范围改造。在拟静力和拟动力两种加载条件下,不同水岩相互作用机理是造成不同水力加载条件出现不同缝网结构的力学机制,而对于实际的页岩气储层改造,压裂产生围绕压裂井全方位放射状的缝网结构则是一种最优的体积压裂改造。 相似文献
4.
水平井中多条水力裂缝间的应力干扰行为,造成了压裂液排量的非均匀分配,影响了水力裂缝的几何形态。采用边界元法研究岩体在压裂液作用下的变形程度,以幂律流体泊肃叶平板流动方程来研究水力裂缝内部的压裂液流场,考虑了多条裂缝间应力干扰和压裂液流量分配,建立了流-固耦合的水平井多条水力裂缝同步扩展模型。模型可模拟水平井多条水力裂缝几何形态、应力干扰情况和压裂液排量的分配情况,可解释水力裂缝之间的竞争机制。多条裂缝同步扩展时,压裂液排量并非均等地分配到各个裂缝之中,进入到内部裂缝的压裂液流量最小,内部裂缝宽度最小;内部的水力裂缝增长一定长度后,停止增长,并且在应力干扰下逐渐闭合。 相似文献
5.
储层非均质性对水力压裂的影响 总被引：1，自引：0，他引：1
从岩石细观非均质性的特点出发,采用RFPA2D-Flow软件对单孔和双孔数值模型进行压裂计算,研究岩石非均质性对水力压裂的响应,重点探讨双孔模型孔间吸引效应对裂纹演化形态的影响。岩石细观单元的力学、水力学特性由统计分布生成以体现岩石的随机不均质性,水力压裂过程中流体压力传递通过单元渗流-损伤耦合迭代来实现。数值计算结果表明:(1)岩石非均质性影响裂缝的扩展形态,导致水力裂纹尖端微裂纹的分支。随着均质度的增加,水力裂纹的扩展形态变得更加平直光滑,单孔模型两侧裂纹更加对称,双孔间裂纹的连通性变差。(2)岩石的非均匀性对于岩石的起裂压力和地层破裂压力影响较大。随着均质度的增大,起裂应力和地层破裂应力增大,并且两者间的差值逐渐变小,在储层为均质的条件下,两者几乎相等。(3)相同的边界条件下,均质模型的应力分布曲线光滑连续,非均质模型的应力分布曲线呈现出明显波动,井眼对称剖面上的应力分布不尽相同,反映了细观单元强度非均匀性及裂缝扩展形态对应力分布的影响。(4)双孔模型孔间存在孔隙水压力增加带,孔间产生吸引效应,双孔方位影响临界压力。研究结果对水压裂试验设计和现场压裂施工具有一定的参考意义。 相似文献
6.
水力压裂作为一种主要的地热能开采手段,其压裂效果除与岩体基本物理力学性质有关外,还与裂隙分布、地应力状态、压裂工程参数等密切相关.为了探究以上因素对水力压裂过程中裂缝扩展行为的影响,以冀中坳陷碳酸盐岩储层岩体为研究对象,基于扩展有限元法,建立裂缝扩展流固耦合模型,分析了水平应力差、射孔方位角、注入液排量和压裂液黏度等参数对裂缝扩展行为的影响.结果表明:单裂缝扩展时,射孔方位角越小、注入量越大、越有利于裂缝扩展;双裂缝扩展时,水平应力差增大,裂缝偏转程度变小;水力裂缝与天然裂缝相交时,较小水平应力差有利于天然裂缝开启. 相似文献
7.
8.
Flowback analysis recently has been considered as a potential tool for assessing induced fractures through corresponding pressure analyses and rate transient analysis. In this paper, we study fracture closure mechanisms during the flowback of fracturing fluid after hydraulic fracturing treatments. Although it is known that flowback can be significantly affected by the geometry of the fractures and closure stress, there has not been any effort to understand the problem from the geomechanical point of view; rather, available studies assume that a fracture closes uniformly with constant fracture compressibility. The coupled geomechanics and fluid flow model presented in this paper help to elucidate how geostresses may affect fracturing fluid recovery under different conditions. We perform a scaling analysis to formulate the occurrence of different fracture closure modes and then use numerical analyses to verify our scaling parameters. The factors governing the flowback process include the mechanical and petrophysical properties of the rock as well as preexisting discontinuities such as natural fractures. Three different closure modes for fracture networks are described and numerically verified. The occurrence of each mode can dramatically affect fracturing fluid recovery. The role of fluid leakoff into the formation, fractures conductivity, and drawdown strategy are examined for each fracture closure scenario. 相似文献
9.
新疆油田某地区油藏的储隔层岩性组合复杂,呈现突出的薄互层产状特征,研究合、分压判断条件有利于提高压裂效率,增强储层动用程度与压后改造效果。水力裂缝在薄互层中的穿层与裂缝扩展行为受薄互层地质特征与压裂施工参数的影响。基于此,开展了薄互层物理模型压裂试验,研究界面胶结、岩层分布、岩层厚度、压裂液黏度与注液排量对薄互层中水力裂缝垂向扩展的影响分析。试验结果表明：薄互层的地层特征界面胶结与岩层分布是水力裂缝垂向扩展的主要控制因素,界面胶结强度对裂缝垂向扩展行为的影响强于岩层分布;由于弱胶结界面的存在,水力裂缝垂向扩展穿层时可发生方向偏转,抑制裂缝垂向扩展;提高压裂液黏度与注液排量有利于薄互层中水力裂缝的穿层垂向扩展。 相似文献
10.
Yongquan Hu Zhiqiang Li Jinzhou Zhao Zhengwu Tao Pan Gao 《Environmental Earth Sciences》2017,76(15):546
The ultra-low-permeability shale gas reservoir has a lot of well-developed natural fractures. It has been proven that hydraulic fracture growth pattern is usually a complex network fracture rather than conventional single planar fractures by micro-seismic monitoring, which can be explained as the shear and tensile failure of natural fractures or creation of new cracks due to the increase in reservoir pore pressure caused by fluid injection during the process of hydraulic fracturing. In order to simulate the network fracture growth, a mathematical model was established based on full tensor permeability, continuum method and fluid mass conservation equation. Firstly, the governing equation of fluid diffusivity based on permeability tensor was solved to obtain the reservoir pressure distribution. Then Mohr–Coulomb shear failure criterion and tensile failure criterion were used to decide whether the rock failed or not in any block on the basis of the calculated reservoir pressure. The grid-block permeability was modified according to the change of fracture aperture once any type of rock failure criterion was met within a grid block. Finally, the stimulated reservoir volume (SRV) zone was represented by an enhancement permeability zone. After calibrating the numerical solution of the model with the field micro-seismic information, a sensitivity study was performed to analyze the effects of some factors including initial reservoir pressure, injection fluid volume, natural fracture azimuth angle and horizontal stress difference on the SRV (shape, size, bandwidth and length). The results show that the SRV size increases with the increasing initial pore reservoir and injection fluid volume, but decreases with the increase in the horizontal principal stress difference and natural fracture azimuth angle. The SRV shape is always similar for different initial pore reservoir and injection fluid volume. The SRV is observed to become shorter in length and wider in bandwidth with the decrease in natural fracture azimuth angle and horizontal principal stress difference. 相似文献
11.
水力压裂作为煤层强化增透技术的一种,其应力演化特征及裂隙形态与扩展范围的判断尤为重要。采用离散元数值方法,以导向压裂为背景,建立水力压裂流固耦合模型;通过应力路径、裂纹热点图等手段,探究水力压裂过程中压裂排量、泊松比、天然裂隙密度对应力演化和裂隙演化的影响及其细观规律。结果表明:不同压裂排量下的应力演化方向及最终应力路径曲线形状有着明显的不同,低排量下裂隙附近的应力比值逐渐增大,而在高排量下先增大后减小;煤层泊松比越大,平均压裂半径越低,但对起裂时间及裂隙的扩展形态影响不明显;天然裂隙的发育情况对水力裂隙的扩展起着关键性作用,高裂隙发育煤层水力裂隙扩展的方向性无法预测,应力演化方向会出现反转现象;压裂过程中不同区域的应力演化特征能够反映出裂隙的扩展状态,现场可通过监测压裂区域附近应力变化,判断水力压裂缝网的扩展范围。 相似文献
12.
The paper deals with two-dimensional (2D) numerical modelling of hydro-fracking (hydraulic fracturing) in rocks at the meso-scale. A numerical model was developed to characterize the properties of fluid-driven fractures in rocks by combining the discrete element method (DEM) with computational fluid dynamics (CFD). The mechanical behaviour of the rock matrix was simulated with DEM and the behaviour of the fracturing fluid flow in newly developed and pre-existing fractures with CFD. The changes in the void geometry in the rock matrix were taken into account. The initial 2D hydro-fracking simulation tests were carried out for a rock segment under biaxial compression with one injection slot in order to validate the numerical model. The qualitative effect of several parameters on the propagation of a hydraulic fracture was studied: initial porosity of the rock matrix, dynamic viscosity of the fracking fluid, rock strength and pre-existing fracture. The characteristic features of a fractured rock mass due to a high-pressure injection of fluid were realistically modelled by the proposed coupled approach.
相似文献13.
水力压裂是青海共和盆地干热岩地热资源开发的难点技术问题之一。本文基于升级改造的大尺寸真三轴水力压裂物理模拟实验系统模拟干热岩储层高温高压环境,利用青海共和盆地露头岩心进行水力压裂物理模拟实验,揭示干热岩储层水力裂缝的起裂和扩展规律。通过物理模拟实验发现：干热岩储层裂缝起裂可以通过文中提出的起裂模型判断起裂方式和预测起裂压力;水力裂缝在岩石基质中的扩展形态简单,仅沿最大主应力方向延伸;但是水力裂缝会受到岩石中弱面的影响,发生转向沿弱面延伸,形成较复杂的裂缝形态。因此,建议在干热岩储层实际施工中,在天然裂缝发育较丰富的层段开展水力压裂,以实现复杂裂缝网络提取地热能。 相似文献
14.
In this paper a new analytical model is proposed to determine the permeability tensor for fractured rock masses based on the superposition principle of liquid dissipation energy. This model relies on the geometrical characteristics of rock fractures and the corresponding fracture network, and demonstrates the coupling effect between fluid flow and stress/deformation. This model empirically considers the effect of pre‐peak shear dilation and shear contraction on the hydraulic behavior of rock fractures and can be used to determine the applicability of the continuum approach to hydro‐mechanical coupling analysis. Results of numerical analysis presented in this paper show that the new model can effectively describe the permeability of fractured rock masses, and can be applied to the coupling analysis of seepage and stress fields. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
15.
Liao Jianxing Gou Yang Feng Wentao Mehmood Faisal Xie Yachen Hou Zhengmeng 《Acta Geotechnica》2020,15(2):279-295
Although hydraulic fracturing has been massively studied and applied as a key technique to enhance the gas production from tight formations, some problems and uncertainties exist to accurately predict and analyze the fracture behavior in complex reservoirs, especially in the naturally fractured reservoirs like shale reservoirs. This paper presents a full 3D numerical model (FLAC3D) to study hydraulic fracturing behavior under the impact of preexisting orthogonal natural fractures. In this numerical model, the hydraulic fracture propagation direction is assumed perpendicular to the minimum principal stress and activated only by tensile failure, whereas the preexisting natural fractures can be activated by tensile or shear failure or a combination of them, and only tensile failure can open the natural fracture as well. The newly developed model was used to study the impact of preexisting orthogonal natural fractures on hydraulic fracturing behavior, based on a multistage hydraulic fracturing operation in a naturally fractured reservoir from the Barnett Shale formation, northwest of Texas in USA. In this multistage operation, two more representative stages, i.e., stage 1 with a relatively large horizontal stress anisotropy of 3.3 MPa and stage 4 with a comparatively small one of 1.3 MPa, were selected to conduct the simulation. Based on the numerical results, one can observe that the interaction between hydraulic and natural fracture is driven mainly by induced stress around fracture tip. Besides, the horizontal stress anisotropy plays a key role in opening the natural fracture. Thus, no significant opened fracture is activated on natural fracture in stage 1, while in stage 4 an opened fracture invades to about 90 m into the first natural fracture. Conversely, the hydraulic fracture length in stage 1 is much longer than in stage 4, as some fluid volume is stored in the opened natural fracture in stage 4. In this work, the shear failure on natural fractures is treated as the main factor for inducing the seismic events. And the simulated seismic events, i.e., shear failure on natural fractures, are very comparable with the measured seismic events.
相似文献16.
采用真三轴物理模型试验机、水力压裂伺服系统、声发射定位系统以及压裂液中添加示踪剂等方式,在真三轴条件下对大尺寸页岩水平井进行了水力压裂物理模拟试验,通过裂缝的动态监测和压裂后剖切等分析了裂缝的扩展规律,并对页岩压裂缝网的形成机制进行了初步探讨。结果表明：（1）水力裂缝自割缝处起裂并扩展、压开或贯穿层理面,形成相对较复杂的裂缝形态;（2）裂缝中既有垂直于层理面的新生水力主裂缝,又有沿弱层理面扩展延伸的次级裂缝,形成了纵向和横向裂缝并存的裂缝网络;（3）水力裂缝在延伸过程中会发生转向而逐渐垂直最小主应力;（4）水力裂缝在扩展过程中遇到弱层理面时的止裂、分叉、穿过和转向现象是形成页岩储层复杂裂缝网络的主要原因,而弱结构面的大量存在是形成复杂裂缝的基础。其研究结果可为页岩气藏水平井分段压裂开采等提供有力技术支持。 相似文献
17.
查明不同煤体结构煤水力压裂时裂缝延伸规律能为合理井网部署奠定基础。以沁水盆地柿庄区块为研究对象,对钻井煤心裂隙进行观测,划分出4种裂隙发育程度煤。基于岩体力学理论,建立了水力压裂过程中裂缝尖端应力场计算模型和水力裂缝能否穿过天然裂隙的判断准则。根据煤层气井实测资料,验证了理论分析的可靠性,得出了不同煤体结构煤的水力压裂裂缝延伸规律。结果表明:考虑诱导应力前后,2组天然裂隙发育煤的水力裂缝延伸规律不同,随着缝长增加,诱导应力随之增大,水力裂缝单一延伸方向变为双向延伸;1组天然裂隙发育煤的发育方向与最大主应力方向夹角较小,导致考虑诱导应力前后水力裂缝的延伸方向变化不明显,整体延伸趋于天然裂隙发育方向;在粒状偶见及粉状无裂隙发育煤中,水力裂缝总是沿着最大主应力方向延伸。研究成果为该区不同应力和裂隙发育下井网合理布置提供了理论依据。 相似文献
18.
Hydraulic fracturing is the method of choice to enhance reservoir permeability and well efficiency for extraction of shale gas. Multi‐stranded non‐planar hydraulic fractures are often observed in stimulation sites. Non‐planar fractures propagating from wellbores inclined from the direction of maximum horizontal stress have also been reported. The pressure required to propagate non‐planar fractures is in general higher than in the case of planar fractures. Current computational methods for the simulation of hydraulic fractures generally assume single, symmetric, and planar crack geometries. In order to better understand hydraulic fracturing in complex‐layered naturally fractured reservoirs, fully 3D models need to be developed. In this paper, we present simulations of 3D non‐planar fracture propagation using an adaptive generalized FEM. This method greatly facilitates the discretization of complex 3D fractures, as finite element faces are not required to fit the crack surfaces. A solution strategy for fully automatic propagation of arbitrary 3D cracks is presented. The fracture surface on which pressure is applied is also automatically updated at each step. An efficient technique to numerically integrate boundary conditions on crack surfaces is also proposed and implemented. Strongly graded localized refinement and analytical asymptotic expansions are used as enrichment functions in the neighborhood of fracture fronts to increase the computational accuracy and efficiency of the method. Stress intensity factors with pressure on crack faces are extracted using the contour integral method. Various non‐planar crack geometries are investigated to demonstrate the robustness and flexibility of the proposed simulation methodology. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
19.
20.
Yao Yao 《Rock Mechanics and Rock Engineering》2012,45(3):375-387
Hydraulic fracturing technology is being widely used within the oil and gas industry for both waste injection and unconventional
gas production wells. It is essential to predict the behavior of hydraulic fractures accurately based on understanding the
fundamental mechanism(s). The prevailing approach for hydraulic fracture modeling continues to rely on computational methods
based on Linear Elastic Fracture Mechanics (LEFM). Generally, these methods give reasonable predictions for hard rock hydraulic
fracture processes, but still have inherent limitations, especially when fluid injection is performed in soft rock/sand or
other non-conventional formations. These methods typically give very conservative predictions on fracture geometry and inaccurate
estimation of required fracture pressure. One of the reasons the LEFM-based methods fail to give accurate predictions for
these materials is that the fracture process zone ahead of the crack tip and softening effect should not be neglected in ductile
rock fracture analysis. A 3D pore pressure cohesive zone model has been developed and applied to predict hydraulic fracturing
under fluid injection. The cohesive zone method is a numerical tool developed to model crack initiation and growth in quasi-brittle
materials considering the material softening effect. The pore pressure cohesive zone model has been applied to investigate
the hydraulic fracture with different rock properties. The hydraulic fracture predictions of a three-layer water injection
case have been compared using the pore pressure cohesive zone model with revised parameters, LEFM-based pseudo 3D model, a
Perkins-Kern–Nordgren (PKN) model, and an analytical solution. Based on the size of the fracture process zone and its effect
on crack extension in ductile rock, the fundamental mechanical difference of LEFM and cohesive fracture mechanics-based methods
is discussed. An effective fracture toughness method has been proposed to consider the fracture process zone effect on the
ductile rock fracture. 相似文献