共查询到20条相似文献，搜索用时 390 毫秒
1.
This paper proposes an extension to the key‐block method, called ‘key‐group method’, that considers not only individual key blocks but also groups of collapsable blocks into an iterative and progressive analysis of the stability of discontinuous rock slopes. The basics of the key‐block method are recalled herein and then used to prove how key groups can be identified. We reveal that a key group must contain at least one basic key block, yet this condition is not entirely sufficient. The second block candidate for grouping must be another key block or a block whose movement‐preventing faces are common to one or more single key blocks. We also show that the proposed method yields more realistic results than the basic key‐block method and a comparison with results obtained using a distinct element analysis demonstrates the ability of this new method. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
2.
The methods used in conducting static stability analyses have remained pertinent to this day for reasons of both simplicity and speed of execution. The most well‐known of these methods for purposes of stability analysis of fractured rock masses is the key‐block method (KBM). This paper proposes an extension to the KBM, called the ‘key‐group method’ (KGM), which combines not only individual key‐blocks but also groups of collapsable blocks into an iterative and progressive analysis of the stability of discontinuous rock slopes. To take intra‐group forces into account, the Sarma method has been implemented within the KGM in order to generate a Sarma‐based KGM, abbreviated ‘SKGM’. We will discuss herein the hypothesis behind this new method, details regarding its implementation, and validation through comparison with results obtained from the distinct element method. Furthermore, as an alternative to deterministic methods, reliability analyses or probabilistic analyses have been proposed to take account of the uncertainty in analytical parameters and models. The FOSM and ASM probabilistic methods could be implemented within the KGM and SKGM framework in order to take account of the uncertainty due to physical and mechanical data (density, cohesion and angle of friction). We will then show how such reliability analyses can be introduced into SKGM to give rise to the probabilistic SKGM (PSKGM) and how it can be used for rock slope reliability analyses. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
3.
A rigid block based lower bound limit analysis method for analyzing stability of fractured rock mass in 2D and 3D conditions is proposed. The rock bridge effects are considered in the general formation. No assumptions are imposed on the inter-element forces, and the solution obtained is statically admissible. The proposed method is theoretically rigorous and simple. The validation and efficiency of the proposed method have been demonstrated through three typical types of slopes, indicating that apart from the fractures, rock bridge plays a key role in stabilizing rock blocks, which should be greatly concerned in stability analysis of rock mass. 相似文献
4.
岩质边坡关键块体的搜索方法及工程应用 总被引：1，自引：0，他引：1
工程边坡开挖所揭露的某些结构面组合块体在破坏原有静力平衡状态后,进行应力重新分配,进而块体会发生失稳、滑动等变形,甚至影响到整个边坡发生破坏,因此,结构面组合块体的稳定性是决定岩质边坡稳定的重要因素。本文通过对某工程开挖边坡地形和结构面三维实体模型的建立,实现了边坡结构面与开挖地形实体模型在AutoCAD平台上的可视化操作,剖切不同位置的二维图形预测分析了边坡开挖后可能存在的结构面组合块体,采用块体计算程序(Swegde)验证关键块体并进行稳定性评价。结果表明:三维实体模型及剖切技术与块体计算方法的结合,易于搜索关键块体。事实证明,该方法操作简便,计算结果准确,搜索方法具备可行性。 相似文献
5.
In natural rock masses, the shapes of three‐dimensional (3‐D) blocks cut by arbitrary fracture networks may be very complex. Owing to the geometric complexity and difficulty of mesh discretization of 3‐D blocks and fracture facets, explicit consideration of fracture networks in flow analysis of fractured porous medium (FPM) is very challenging. Using the numerical manifold method based on independent covers (NMMIC), an FPM flow model was proposed that can deal with very complex 3‐D fracture networks. In this paper, the convergence of NMMIC was first demonstrated. The theoretical basis of the arbitrary refinement of computational meshes was proven. Moreover, three peculiarities of NMMIC meshes, that is, arbitrary shape, arbitrary connection, and arbitrary refinement of independent covers, were concluded. Finally, some two‐dimensional (2‐D) tunnel flow examples were analyzed and the numerical results were compared with the analytical results. 3‐D examples with complex fracture distributions were also analyzed. In addition, the computational scale of the developed program was tested by increasing the number of computational elements. The results show that our model can accurately analyze the groundwater flow of rocks surrounding tunnels with complex fracture distributions. 相似文献
6.
The rock mass structure determines the possible unstable blocks that can induce rock fall phenomena. The stability analyses
must therefore be based on an accurate geo-structural survey. In this work, the stability conditions of several steep slopes
along a motorway in the Far East have been evaluated through key block analysis based on traditional surveys and on laser
scanner acquisitions. Discontinuity orientations and positions on the rock face are derived from the point cloud in order
to perform the reconstruction of the rock mass and to identify blocks in the slope. Results obtained from both the traditional
and the new method is in good agreement. Stability analyses have been performed for evaluating the kinematic feasibility of
different failure mechanisms. The rock block shapes and volumes are computed by performing 2D and 3D analyses whereas the
failure mechanisms are examined using the key block method. Parametrical analyses have been carried on to evaluate the influence
of slope angle variation. DEM models have also been set up. The relative hazard is determined by statistically evaluating
the kinematical feasibility of different failure mechanisms. Hazard mapping has been utilized to identify the best methodology
for risk mitigation. 相似文献
7.
关键块体理论在评价工程裂隙岩体稳定性中得到了广泛应用。然而,一方面岩体中节理数量众多,关键块体的搜索将耗费较多机时;另一方面,极少数偶然出现的块体识别也会极大地增加计算量。因此,开发有针对性和灵活的关键块体搜索方法就非常重要。首先将研究区域分解成凸子区域,找出自由面上的闭合环路,然后利用环路的组成节理以及与其相交节理进行空间无限切割来识别该环路是否对应关键块体。该方法针对性强,能较好地适应人为规定的判别条件,如搜索楔形体以及后缘切割限定等,并能顺利实现凹面体的关键块体搜索,且编程实现简单。以某挂帮矿的顶柱为实例进行关键块体的搜索,验证了上述方法的可行性。 相似文献
8.
基于地下岩体受节理面的控制,节理面的几何和力学参数随机分布,从而导致岩体系统具有高度不确定性,提出以关键块体理论为基础,考虑节理几何和力学参数随机性的岩体开挖可靠度分析方法,并给出了块体稳定的总失效概率评价模型。以澳大利亚阿德莱德地区一铜矿地质条件为例,以节理面倾角、倾向、摩擦系数和黏聚力为随机变量,通过Monte Carlo模拟和概率图方法,进行了岩体可靠度和失效概率的计算。最后,采用条件概率的分析方法,计算了单面滑动块体的总失效概率。计算结果表明,块体沿单面滑动并且出现的概率为11.0%,总的失效概率为3.85%,超过一般岩体工程可允许的风险水平,认为该方法可以作为评价块体可靠性的依据。 相似文献
9.
The paper provides a new stereo‐analytical method, which is a combination of the stereographic method and analytical methods, to separate finite removable blocks from the infinite and tapered blocks in discontinuous rock masses. The methodology has applicability to both convex and concave blocks. Application of the methodology is illustrated through examples. Addition of this method to the existing block theory procedures available in the literature improves the capability of block theory in solving practical problems in rock engineering. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
10.
重庆武隆鸡尾山滑坡视向滑动机制分析 总被引：8，自引：0，他引：8
重庆武隆鸡尾山山体为典型的斜倾厚层灰岩山体,其破坏模式不同于常见侧向崩塌-堆积层滑坡,属于真倾向滑移变形转为视向整体滑动的特殊失稳模式。在现场地质调查的基础上,从地层岩性、岩体结构、岩溶及地下水作用、软弱夹层等影响因素分析重庆武隆鸡尾山滑坡形成原因;根据滑坡破坏机制,基于关键块体控制理论,对鸡尾山滑坡进行三维稳定性极限平衡分析;利用三维离散元软件模拟鸡尾山滑坡的初始变形破坏过程,分析了鸡尾山滑坡不同影响因素条件下的视向滑动形成机制和变形破坏特征,并探讨了节理化和溶蚀岩体的参数取值。结果分析认为,在重力的长期作用下,鸡尾山山体初始沿真倾向方向滑移,沿岩溶发育的陡倾节理裂隙逐渐产生后缘及侧向裂缝,形成块状后部驱动块体,由于地下水等因素使软弱夹层软化,驱动块体下滑力增大,前缘阻滑关键块体内部应力积累,并最终沿强度较低的岩溶发育带发生剪切破坏,从而导致整体滑动;在进行滑坡稳定性极限平衡分析时,考虑实际的滑坡机制,将滑体分为驱动块体和关键块体分别进行力的解析,并以关键块体的安全系数代表滑坡的安全系数更加合理。数值模拟显示,软弱夹层强度降低、岩溶发育带剪切破坏后,滑体进入大变形阶段,表明关键块体控制和阻滑作用明显,软弱夹层强度降低是滑坡发生的关键因素。采矿形成的采空区对山体的影响主要是使上覆岩体压应力增大,但对滑体的变形无影响。 相似文献
11.
弹粘塑性块体单元法在龙滩水电站右坝肩边坡稳定分析中的应用 总被引：1，自引：0，他引：1
介绍了三维弹粘塑性块体单元法的基本原理。该方法假定岩石块体为刚体,只考虑结构面的变形和强度特性。在建立块体系统的平衡方程、结构面的变形与块体位移的几何相容方程以及结构面上的弹粘塑性本构方程的基础上,出块体系统位移与稳定的基本方程。针对龙滩水电站右坝肩边坡地质条件复杂,块体稳定问题较为突出的情况,采用块体单元法计算了边坡中典型结构面切割形成的特定块体在不同工况下的强度储备安全系数,并针对结构面的几何参数和力学参数等重要影响因素进行了敏感性分析,为工程设计提供了依据。应用表明,作为一种新型的水工结构数值方法,块体单元法应用于复杂地质条件下的岩石高边坡的稳定和变形分析具有准确、适用和简便的特点。 相似文献
12.
《Geomechanics and Geoengineering》2013,8(4):255-262
In this study, the probabilistic key block analysis was applied to evaluate the stability of a mine ventilation shaft developed in a rock mass of granite. The key blocks were identified based on the block theory. The variations of discontinuity orientations were fitted with the Beta distribution and taken into consideration. The key block forming probabilities were analyzed. For simplification of calculations the first-order second-moment (FOSM) approximation was employed for probability estimation. With the considerations of the rock properties as random variables and applications of several statistical analysis tools, the key block failure probabilities, the probabilistic distribution of safety factors, and the probabilistic distribution of potential maximum key block volumes were analyzed. The analysis indicated that although the safety factor calculated based on the mean values of the variables was above 1.0 for the stability of the most critical key block, the block had a considerable probability of failure with a significant rock volume due to variations in discontinuity orientations and rock properties. Without promptly applying supports to the rock excavation, the shaft had a significant likelihood of failure. 相似文献
13.
块体是结构控制型岩体中常见的潜在危险源之一。利用极限平衡法及强度折减法两种方法计算了某在建特大型水电站地下厂房开挖揭露的部分块体的安全系数,并根据计算结果提出一种利用块体几何及力学参数判断其稳定性的简便图解方法,经现场监测数据验证计算结果可靠性可满足工程要求。研究表明,对同一块体而言,极限平衡法和强度折减法得到的安全系数以及对其稳定性的总体判别结果并不一致。强度折减法受软件算法及网格尺寸影响,结果偏于保守。简单块体的安全系数计算应以极限平衡法为主,而复杂形态块体的安全系数用强度折减法计算较为方便。利用垂向地应力、块体体积、最大角点深度及结构面等效强度等4个指标并结合块体稳定性判别分区图,可满足快速判断块体稳定性的需要。对于判别为不稳定的块体,应及时支护并考虑加强支护。研究成果可用于类似工程块体稳定性的快速分析。 相似文献
14.
大型地下洞室群关键块体地震响应分析 总被引：1，自引：1，他引：0
基于块体理论,针对地下厂房围岩中的关键块体,采用Newmark法进行了地震响应特征和稳定性评价方法的研究,研究表明,三向地震荷载组合作用下,在块体上引起的数值较大、作用时间很短的惯性力是关键块体产生永久位移的根本原因。块体在不同烈度地震荷载作用下其响应特征不只发生量的变化,还有运动规律、模式方面的变化。研究还发现,关键块体地震响应特征与其几何特征存在一定的相关性,并由此建立了大型地下洞室群围岩地震稳定分析的多因素、多指标评判方法。最后考虑结构面的退化效应,研究了块体地震响应特征关于结构面强度参数的敏感性,获得了一些有益的结论。 相似文献
15.
视岩石裂隙为一种“充填介质”,进而将有填充物和无填充物的裂隙统一处理,推导了裂隙面的刚度系数、导水系数和法向应力之间的关系式。在此基础上,根据块体单元法的应力、渗流分析的基本原理,即认为岩块为刚体、变形集中发生于裂隙面,假定岩块不透水、渗流仅通过裂隙面进行,并考虑了法向应力和裂隙面刚度、导水系数的关系式,运用两场交叉迭代法,提出了三维随机裂隙岩体渗流与应力耦合分析的块体单元模型。编写了相应的Fortran程序,该程序将块体元的应力、渗流两个分析模块整合在一起,计算效率较高。该模型的最大优势是能考虑大规模复杂的节理、裂隙,且前、后处理简单。通过沙沱重力坝的分析,验证了方法的准确性和有效性 相似文献
16.
经典块体理论在进行块体可移动性分析和稳定性计算时是分步独立进行的,默认不可移动块体是稳定的,对不可移动块体不再进行稳定性分析。实际工程中,某些阻碍岩石块体运动的“岩桥”可能发生破坏,使得不可移动块体发生滑动。当块体的规模比较大时,在重力作用下破坏局部岩桥的可能性会增高。文中提出一种考虑岩桥破坏的块体稳定性分析方法,不再默认不可移动块体绝对稳定,计算块体稳定系数时,将阻碍块体移动的岩桥的抗剪切力纳入到块体的抗滑力中。该方法首先找出块体所有可能的滑动面和裂隙交线,识别块体沿每一个方向运动时需要破坏的岩桥,基于摩尔-库仑强度准则计算出块体沿每个方向运动时的稳定系数,然后,选取最小的稳定系数作为块体的实际稳定系数,最小稳定系数对应的方向即为块体最有可能的运动方向。 相似文献
17.
断层构造是制约地下工程设计与施工的关键因素。综合考虑复杂地质构造与地下洞室群结构的耦合关系,采用三维地质建模方法建立实现了地层体、断层体与地下洞室群结构的统一模型。基于三维模型提出了断层复杂度的概念,为水利水电工程地下厂房洞室群的选址方案分析提供了一种新的手段。针对地下围岩稳定性问题,提出基于断层与断层、断层与开挖面相互切割的曲面块体识别方法,搜索地下厂房洞室群内可能的失稳区域。上述方法已成功应用在某水电工程地下厂房洞室群分析中,在设计方案优化分析中取得了良好的效果。 相似文献
18.
19.
Physical Modeling of Landslide Mechanism in Oblique Thick-Bedded Rock Slope: A Case Study 总被引：1，自引：0，他引：1
The Jiweishan landslide illustrates the failure pattern of an apparent dip slide of an oblique thick-bedded rockslide. Centrifugal modeling was performed using a model slope consisting of four sets of joints to investigate the landslide initiation mechanism. Crack strain gauges pasted between the slide blocks and the base failed in sequence from the rear to the front as the centrifugal acceleration increased. When the acceleration reached 16.3g, the instantaneous failure of the key block in the front triggered the apparent dip slide of all blocks. The physical modeling results and previous studies suggest that the strength reduction in the weak layer and the failure of the key block are the main reasons for the Jiweishan landslide. The centrifuge experiment validated the previously proposed driving-blocks–key-block model of apparent dip slide in oblique with inclined bedding rock slopes. In addition, the results from limit equilibrium method and centrifuge test suggest that even though the failure of the key block in the front is instantaneous, a progressive stable–unstable transition exists. 相似文献
20.
《Geomechanics and Geoengineering》2013,8(4):293-302
This paper presents a comparative study of two methods, Sarma's method and the discontinuous deformation analysis (DDA), for rock slope stability analysis. The comparison concerns the stability analysis of two classic rock slopes. The study shows that the DDA, which accounts for the block kinematics, provides a very different factor of safety as compared with Sarma's method. More realistic reaction forces around each rock block can be obtained by the DDA, including the thrust forces between rock blocks and the forces between the base and the blocks. The DDA's result shows two possible directions for the relative movement between two contiguous blocks at the initiation of slope failure. It also indicates that the limit equilibrium condition may not occur along the interfaces of rock blocks at the initiation of slope failure. The determination of realistic interaction forces around each block will be very important in rock slope stability analysis if nonlinear failure criteria are considered. 相似文献