共查询到20条相似文献，搜索用时 31 毫秒
1.
Selected gas pulse tests on initially saturated claystone samples under isotropic confinement pressure are simulated using a 3D thermo‐hydro‐mechanical code. The constitutive model considers the hydro‐mechanical anisotropy of argillaceous rocks. A cross‐anisotropic linear elastic law is adopted for the mechanical behaviour. Elements for a proper modelling of gas flow along preferential paths include an embedded fracture permeability model. Rock permeability and its retention curve depend on strains through a fracture aperture. The hydraulic and mechanical behaviours have a common anisotropic structure. Small‐scale heterogeneity is considered to enhance the initiation of flow through preferential paths, following the direction of the bedding planes. The numerical simulations were performed considering two different bedding orientations, parallel and normal to the imposed flow in the test. Simulations are in agreement with recorded upstream and downstream pressures in the tests. The evolution of fluid pressures, degree of saturation, element permeability and stress paths are presented for each case analysed. This information provides a good insight into the mechanisms of gas transport. Different flow patterns are obtained depending on bedding orientation, and the results provide an explanation for the results obtained in the tests. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
2.
假定准饱和黏土由饱和基质（土骨架和水）和封闭气体组成,采用饱和基质塑性体应变和气体塑性体应变作为硬化参数以反映准饱和黏土的塑性硬化行为,在综合考虑气体溶解系数随温度和水中含盐量变化、预固结应力随封闭气体的变化等关键因素的基础上,基于临界状态土力学理论提出了可以反映封闭气体气压变化对准饱和黏土力学影响的弹塑性本构模型。模型共计10个材料参数,均可通过等向压缩试验和三轴剪切试验获得。通过与已有试验数据对比分析,结果显示本模型可以较好地模拟准饱和黏土在不排水应力路径下的应力-应变关系、孔隙水压力发展以及饱和度的演变规律;所建立模型形式简单,参数易于确定,为准饱和黏土地基中岩土工程问题的设计、计算及灾变控制提供了重要的理论基础。 相似文献
3.
Massimiliano Ferronato Giuseppe Gambolati Carlo Janna Pietro Teatini 《国际地质力学数值与分析法杂志》2008,32(6):633-657
The stress variation induced by gas/oil production may activate pre‐existing regional faults. This may enhance the expected land subsidence due to the generation of mechanically weak points close to the producing field. A class of elasto‐plastic interface elements (IE), specifically designed to address the mechanical behaviour of faults over a regional scale, is integrated into a finite element (FE) geomechanical model and used to investigate the role exerted by active faults in anthropogenic land subsidence. The importance of regional faults depends on a variety of factors including depth of the depleted reservoir, fault number, orientation and size, geomechanical properties of porous medium, pore pressure drawdown induced by fluid production, etc. With the aid of some representative examples, a useful indication is provided as to where and how fault activation may influence both magnitude and extent of the land subsidence bowl above producing gas/oil reservoirs, pointing to a generally limited impact on the ground surface. The simulation of a real faulted gas reservoir in a complex 3‐D setting shows that the proposed IE can be simply and efficiently incorporated into a FE geomechanical model, thus improving the quality of the stress and displacement prediction. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
4.
A hierarchical thermo‐hydro‐plastic constitutive model for unsaturated soils and its numerical implementation 
下载免费PDF全文
下载免费PDF全文 《国际地质力学数值与分析法杂志》2018,42(15):1785-1805
Unsaturated soils are highly heterogeneous 3‐phase porous media. Variations of temperature, the degree of saturation, and density have dramatic impacts on the hydro‐mechanical behavior of unsaturated soils. To model all these features, we present a thermo‐hydro‐plastic model in which the hydro‐mechanical hardening and thermal softening are incorporated in a hierarchical fashion for unsaturated soils. This novel constitutive model can capture heterogeneities in density, suction, the degree of saturation, and temperature. Specifically, this constitutive model has 2 ingredients: (1) it has a “mesoscale” mechanical state variable—porosity and 3 environmental state variables—suction, the degree of saturation, and temperature; (2) both temperature and mechanical effects on water retention properties are taken into account. The return mapping algorithm is applied to implement this model at Gauss point assuming an infinitesimal strain. At each time step, the return mapping is conducted only in principal elastic strain space, assuming no return mapping in suction and temperature. The numerical results obtained by this constitutive model are compared with the experimental results. It shows that the proposed model can simulate the thermo‐hydro‐mechanical behavior of unsaturated soils with satisfaction. We also conduct shear band analysis of an unsaturated soil specimen under plane strain condition to demonstrate the impact of temperature variation on shear banding triggered by initial material heterogeneities. 相似文献
5.
A coupled poroplastic damage model accounting for cracking effects on both hydraulic and mechanical properties of unsaturated media 下载免费PDF全文
下载免费PDF全文 Tuan Anh Bui Henry Wong Frederic Deleruyelle Annan Zhou Xiaoqin Lei 《国际地质力学数值与分析法杂志》2016,40(5):625-650
Damage induced by microcracking affects not only the mechanical behaviour of geomaterials but also their hydraulic properties. Evaluating these impacts is important for many engineering applications, such as the safety assessment of radioactive waste disposal facilities. This paper presents a new constitutive model accounting simultaneously for the impact of damage on hydraulic and mechanical properties of unsaturated poroplastic geomaterials. The hydro‐mechanical coupling is formulated by means of the thermodynamic framework for partially saturated media, extended by taking into account isotropic damage and plasticity. State and complementary laws are governed by the so‐called plastic effective stress and equivalent pore pressure. Assuming a bimodal pore size distribution for cracked porous media, the hydraulic part (water retention curve and hydraulic conductivity) is modelled using phenomenological functions of damage variable. The participation of damage on both mechanical and hydraulic part enables this model to describe bilateral couplings between them. This coupled model is then validated against a number of experimental data obtained from Callovo‐Oxfordian argillite, which is the possible host rock for a radioactive waste disposal in France. Parametric studies are also carried out to check the consistency and to better demonstrate the bilateral couplings in the model. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
6.
We present a numerical modelling of elastoplastic damage due to drying shrinkage of concrete in the framework of mechanics of partially saturated porous media. An elastoplastic model coupled with isotropic damage is first formulated. Two plastic flow mechanisms are involved, controlled by applied stress and suction, respectively. A general concept of net effective stress is used in take into account effects of capillary pressure and material damage on stress‐controlled plastic deformation. Damage evolution depends both on elastic and plastic strains. The model's parameters are determined or chosen from relevant experimental data. Comparisons between numerical simulations and experimental data are presented to show the capacity of model to reproduce mains features of concrete behaviour under mechanical loading and during drying shrinkage of concrete. An example of application concerning drying of a concrete wall is finally presented. The results obtained allow to show potential capacity of proposed model for numerical modelling of complex coupling processes in concrete structures. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
7.
To accurately predict soil volume changes under thermal cycles is of great importance for analysing the performance of many earth structures such as the energy pile and energy storage system. Most of the existing thermo‐mechanical models focus on soil behaviour under monotonic thermal loading only, and they are not able to capture soil volume changes under thermal cycles. In this study, a constitutive model is proposed to simulate volume changes of saturated soil subjected to cyclic heating and cooling. Two surfaces are defined and used: a bounding surface and a memory surface. The bounding surface and memory surface are mainly controlled by the preconsolidation pressure (a function of plastic volumetric strain) and the maximum stress experienced by the soil, respectively. Under thermal cycles, the distance of the two surfaces and plastic modulus increase with an accumulation of plastic strain. By adopting the double surface concept, a new elastoplastic model is derived from an existing single bounding surface thermo‐mechanical model. Comparisons between model predictions and experimental results reveal that the proposed model is able to capture soil volume changes under thermal cycles well. The plastic strain accumulates under thermal cycles, but at a decreasing rate, until stabilization. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
8.
The Barcelona basic model cannot predict the mechanical behaviour of unsaturated expansive soils, whereas the Barcelona expansive model (BExM) can only predict the stress–strain behaviour of unsaturated expansive soils without the water‐retention behaviour being incorporated. Moreover, the micro‐parameters and the coupling function between micro‐structural and macro‐structural strains in the BExM are difficult to determine. Experimental data show that the compression curves for non‐expansive soils under constant suctions are shifted towards higher void ratios with increasing suction, whereas the opposite is true for expansive soils. According to the observed water‐retention behaviour of unsaturated expansive soils, the air‐entry value increases with density, and the relationship between the degree of saturation and void ratio is linear at constant suction. According to the above observation, an elastoplastic constitutive model is developed for predicting the hydraulic and mechanical behaviour of unsaturated expansive soils, based on the existing hydro‐mechanical model for non‐expansive unsaturated soil. The model takes into consideration the effect of degree of saturation on the mechanical behaviour and that of void ratio on the water‐retention behaviour. The concept of equivalent void ratio curve is introduced to distinguish the plastic potential curve from the yield curve. The model predictions are compared with the test results of an unsaturated expansive soil, including swelling tests under constant net stress, isotropic compression tests and triaxial shear tests under constant suction. The comparison indicates that the model offers great potential for quantitatively predicting the hydraulic and mechanical behaviour of unsaturated expansive soils. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
9.
10.
This paper presents a numerical model for the elasto‐plastic electro‐osmosis consolidation of unsaturated clays experiencing large strains, by considering electro‐osmosis and hydro‐mechanical flows in a deformable multiphase porous medium. The coupled governing equations involving the pore water flow, pore gas flow, electric flow and mechanical deformation in unsaturated clays are derived within the framework of averaging theory and solved numerically using finite elements. The displacements of the solid phase, the pressure of the water phase, the pressure of the gas phase and the electric potential are taken as the primary unknowns in the proposed model. The nonlinear variation of transport parameters during electro‐osmosis consolidation are incorporated into the model using empirical expressions that strongly depend on the degree of water saturation, whereas the Barcelona Basic Model is employed to simulate the elasto‐plastic mechanical behaviour of unsaturated clays. The accuracy of the proposed model is evaluated by validating it against two well‐known numerical examples, involving electro‐osmosis and unsaturated soil behaviour respectively. Two further examples are then investigated to study the capability of the computational algorithm in modelling multiphase flow in electro‐osmosis consolidation. Finally, the effects of gas generation at the anode, the deformation characteristics, the degree of saturation and the time dependent evolution of the excess pore pressure are discussed. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
11.
12.
Numerical modeling of the elastoplastic damage behavior of dry and saturated concrete targets subjected to rigid projectile penetration 下载免费PDF全文
下载免费PDF全文 The objective of the present paper is to present a numerical study on the penetration performance of concrete targets with 2 different water contents. Numerical analysis has been performed by using the finite element code Abaqus/Explicit, in which a coupled elastoplastic damage model has been developed for saturated/unsaturated concrete under a wide range of confining pressures. The performance of proposed model has been firstly verified by simulating the triaxial compression tests and penetration tests realized with saturated/dry concretes. Comparisons of available experimental results and numerical simulations show that the proposed model is able to reproduce satisfactorily the mechanical behavior of saturated and dry concretes. A higher failure stress and a more important pores closing are generally obtained in dry concrete samples with respect to saturated ones. Furthermore, the main observed patterns of penetration test realized with saturated concrete targets are also satisfactorily simulated by the numerical results. Therefore, the proposed model is used to numerically predict the penetration performance of dry concrete target, and the penetration performance of dry/saturated concrete target is discussed. We observe that in dry concrete target, the penetration of projectile is strongly declined, and a smaller damage zone is created. The numerical predictions and discussions can help engineers to enhance their understandings on the influence of hydraulic conditions on structural vulnerability of concrete structures subjected to near‐field detonations or impacts. 相似文献
13.
Jianjun Ma 《Rock Mechanics and Rock Engineering》2016,49(2):455-465
A unified elastoplastic model for describing the stress–strain behavior of partially saturated collapsible rocks is proposed. The elastic–plastic response due to loading and unloading is captured using bounding surface plasticity. The coupling effect of hydraulic and mechanical responses is addressed by applying the effective stress concept. Special attention is paid to the rock–fluid characteristic curve (RFCC), effective stress parameter, and suction hardening. A wide range of saturation degree is considered. The characteristics of mechanical behavior in partially saturated collapsible rocks are captured for all cases considered. 相似文献
14.
岩体饱和–非饱和渗流、应力耦合作用对工程岩体的强度和稳定性有十分重要的影响。目前对于裂隙岩体饱和渗流应力耦合的研究取得了一些进展,但在很多工程领域不能简单地采用饱和渗流分析。根据DDA力学计算和非饱和渗流计算原理,提出了新的基于DDA方法的非饱和渗流应力耦合模型。并给出了在库水位骤降工况下的边坡水力耦合算例,其计算结果显示在库水位骤降情况下：考虑水力耦合且库水位下降较快时的安全系数要小于库水位下降慢时的安全系数;考虑水力耦合的边坡稳定安全系数要小于不考虑耦合时的安全系数。仿真实验和工程应用表明其计算成果是符合实践规律的。 相似文献
15.
Giulia Codegone Vera Rocca Francesca Verga Christian Coti 《Geotechnical and Geological Engineering》2016,34(6):1749-1763
The multi-disciplinary work described in the paper was aimed at analyzing and predicting the cyclical ground surface movements induced by underground gas storage (UGS) activities in a depleted gas field located in the Po Plain (Italy). The field has been operated as a storage facility for nearly three decades. Currently, the possibility of delta-pressuring the reservoir (i.e. to increase the maximum operating pressure above the initial reservoir pressure) to enhance the storage performance is being considered. Significant information was collected over time: 2/3D seismic surveys, geological and sedimentological studies, 60+ logged wells, geotechnical lab tests and 50+ years of production history and monitoring were available for the development of a fully integrated static–dynamic–geomechanical analysis. The mechanical aspects of the study are the focus of this paper. The data coming from different sources at different scales were analysed and integrated to set up and characterize a 3D finite element method mechanical model to calculate the surface movements induced by UGS activity by adopting an elasto-plastic constitutive law. The model was then calibrated via a back analysis approach, i.e. the model parameters were fine-tuned so that the simulated subsidence/uplift would compare satisfactorily with the ground movements collected over nearly 10 years of monitoring via interferometric synthetic aperture radar analysis in the region under investigation. Eventually, the calibrated model was used as a forecasting tool for subsidence evaluation under different future storage strategies, including delta-pressuring conditions. Results proved that no significant subsidence is expected even if the maximum operating pressure reached 120 % of the initial formation pressure. 相似文献
16.
17.
基于各向同性弹塑性损伤和Prevost模型的基本理论,把弹塑性等向硬化、运动硬化和各向同性损伤结合起来,推导了循环荷载作用下不排水饱和软黏土的弹塑性动力损伤本构模型。由循环累积塑性偏应变建立损伤演化方程,以描述循环加载对软黏土结构的破坏作用,并通过对循环三轴试验的模拟验证了模型的有效性。结果表明,提出的模型能较好地描述饱和软黏土在循环荷载作用下的变形、孔压变化及模量损伤过程。 相似文献
18.
19.
A new formulation of the element‐free Galerkin (EFG) method is developed for solving coupled hydro‐mechanical problems. The numerical approach is based on solving the two governing partial differential equations of equilibrium and continuity of pore water simultaneously. Spatial variables in the weak form, i.e. displacement increment and pore water pressure increment, are discretized using the same EFG shape functions. An incremental constrained Galerkin weak form is used to create the discrete system equations and a fully implicit scheme is used for discretization in the time domain. Implementation of essential boundary conditions is based on a penalty method. Numerical stability of the developed formulation is examined in order to achieve appropriate accuracy of the EFG solution for coupled hydro‐mechanical problems. Examples are studied and compared with closed‐form or finite element method solutions to demonstrate the validity of the developed model and its capabilities. The results indicate that the EFG method is capable of handling coupled problems in saturated porous media and can predict well both the soil deformation and variation of pore water pressure over time. Some guidelines are proposed to guarantee the accuracy of the EFG solution for coupled hydro‐mechanical problems. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献