共查询到20条相似文献，搜索用时 46 毫秒
1.
Stress‐driven integration strategies and m‐AGC tangent operator for Perzyna viscoplasticity and viscoplastic relaxation: application to geomechanical interfaces 
下载免费PDF全文
下载免费PDF全文 The paper proposes a stress‐driven integration strategy for Perzyna‐type viscoplastic constitutive models, which leads also to a convenient algorithm for viscoplastic relaxation schemes. A generalized trapezoidal rule for the strain increment, combined with a linearized form of the yield function and flow rules, leads to a plasticity‐like compliance operator that can be explicitly inverted to give an algorithmic tangent stiffness tensor also denoted as the m‐AGC tangent operator. This operator is combined with the stress‐prescribed integration scheme, to obtain a natural error indicator that can be used as a convergence criterion of the intra‐step iterations (in physical viscoplasticity), or to a variable time‐step size in viscoplastic relaxation schemes based on a single linear calculation per time step. The proposed schemes have been implemented for an existing zero‐thickness interface constitutive model. Some numerical application examples are presented to illustrate the advantages of the new schemes proposed. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
2.
从内能角度分析发生蠕变的机制,基于应变能理论,采用Perzyna黏塑性理论与西原正夫元件模型相结合,建立了一种能描述衰减蠕变、稳定蠕变和加速蠕变3个阶段全过程的蠕变统一本构模型。该模型考虑了应力状态对加速蠕变的影响,通过定义加速蠕变临界应变能密度值可以有效判断加速蠕变发生时刻,并在统一蠕变本构模型基础上进行简化,采用Drucker-Prager（D-P）屈服准则结合相关联流动法则,用过屈服应力比反映加速阶段蠕变应变速率变化,建立了一个实用的能预测加速蠕变并能反映蠕变3阶段全过程的简化蠕变本构模型,结果表明,数值模拟结果与试验数据基本吻合,研究成果为岩石蠕变断裂过程研究提供了一种新的思路。 相似文献
3.
This paper reappraises Perzyna-type viscoplasticity for the constitutive modelling of granular geomaterials, with emphasis on the simulation of rate/time effects of different magnitude. An existing elasto-plastic model for sands is first recast into a Perzyna viscoplastic formulation and then calibrated/validated against laboratory test results on Hostun sand from the literature. Notable model features include (1) enhanced definition of the viscous nucleus function and (2) void ratio dependence of stiffness and viscous parameters, to model the pycnotropic behaviour of granular materials with a single set of parameters, uniquely identified against standard creep and triaxial test results. The comparison between experimental data and numerical simulations points out the predicative capability of the developed model and the complexity of defining a unique viscous nucleus function to capture sand behaviour under different loading/initial/boundary and drainage conditions. It is concluded that the unified viscoplastic simulation of both drained and undrained response is particularly challenging within Perzyna's framework and opens to future research in the area. The discussion presented is relevant, for instance, to the simulation of multiphase strain localisation phenomena, such as those associated to slope stability problems in variably saturated soils. 相似文献
4.
This paper presents the development, calibration, and validation of a smoothed particle hydrodynamics (SPH) model for the simulation of seismically induced slope deformation under undrained condition. A constitutive model that combines the isotropic strain softening viscoplasticity and the modified Kondner and Zelasko rule is developed and implemented into SPH formulations. The developed SPH model accounts for the effects of wave propagation in the sliding mass, cyclic nonlinear behavior of soil, and progressive reduction in shear strength during sliding, which are not explicitly considered in various Newmark‐type analyses widely used in the current research and practice in geotechnical earthquake engineering. Soil parameters needed for the developed model can be calibrated using typical laboratory shear strength tests, and experimental or empirical shear modulus reduction curve and damping curve. The strain‐rate effects on soil strength are considered. The developed SPH model is validated against a readily available and well‐documented model slope test on a shaking table. The model simulated slope failure mode, acceleration response spectra, and slope deformations are in excellent agreement with the experimental data. It is thus suggested that the developed SPH model may be utilized to reliably simulate earthquake‐induced slope deformations. This paper also indicates that if implemented with appropriate constitutive models, SPH method can be used to model large‐deformation problems with high fidelity. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
5.
The paper presents a constitutive model for simulating the high strain‐rate behavior of sands. Based on the concepts of critical‐state soil mechanics, the bounding surface plasticity theory and the overstress theory of viscoplasticity, the constitutive model simulates the high strain‐rate behavior of sands under uniaxial, triaxial and multi‐axial loading conditions. The model parameters are determined for Ottawa and Fontainebleau sands, and the performance of the model under extreme transient loading conditions is demonstrated through simulations of split Hopkinson pressure bar tests up to a strain rate of 2000/s. The constitutive model is implemented in a finite‐element analysis software Abaqus to analyze underground tunnels in sandy soil subjected to internal blast loads. Parametric studies are conducted to examine the effect of relative density and type of sand and of the depth of tunnel on the variation of stresses and deformations in the soil adjacent to the tunnels. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
6.
The objective of this study is to derive an effective stress‐based constitutive law capable of predicting rate‐dependent stress–strain, stress path and undrained shear strength and creep behavior. The flow rule used in the MIT‐E3 model and viscoplasticity theory is employed in the derivation. The model adopts the yield surface capable of representing the yield behavior of the Taipei silty clay and assumes that it is initially symmetric about the K0‐line. A method is then developed to compute the gyration and expansion of the loading surface to simulate the anisotropic behavior due to the principal stress rotation after shear. There are 11 parameters required for the model to describe the soil behavior and six of them are exactly the same as those used in the Modified Cam‐clay model. The five additional parameters can be obtained by parametric studies or conventional soil tests, such as consolidation tests, triaxial compression and extension tests. Finally, verification of the model for the anisotropic behavior, creep behavior and the rate‐dependent undrained stress–strain and shear strength of the Taipei silty clay is conducted. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
7.
A constitutive model for crushed salt is presented in this paper. A creep constitutive model is developed first and compared with test results. The constitutive model presented here concentrates on creep deformation because saline media behave basically in a ductile and time‐dependent way. An idealized geometry is used as a common framework to obtain stress–strain macroscopic laws based on two deformation mechanisms: fluid‐assisted diffusional transfer creep and dislocation creep. The model is able to predict strain rates that compare well with results from laboratory tests under isotropic and oedometric conditions. Macroscopic laws are written using a non‐linear viscous approach, which incorporates also a viscoplastic component, based on critical state theory. The viscoplastic term is intended for non‐creep deformation mechanisms such as grain reorganization and crushing. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
8.
Bounding surface‐based modeling of compacted silty sand exhibiting suction dependent postpeak strain softening 下载免费PDF全文
下载免费PDF全文 Ujwalkumar D. Patil Laureano R. Hoyos Mathilde Morvan Anand J. Puppala 《国际地质力学数值与分析法杂志》2018,42(14):1741-1761
This article focuses on modeling the strain hardening‐softening response of statically compacted silty sand as observed from a comprehensive series of suction‐controlled, consolidated‐drained triaxial tests accomplished in a fully automated, double‐walled triaxial test system via the axis‐translation technique. The constitutive model used in this work is based on the theory of Bounding Surface (BS) plasticity and is formulated within a critical state framework. The essential BS model parameters are calibrated using the full set of triaxial test results and then used for predictions of compacted silty sand response at matric suction states varying from 50 to 750 kPa. Complementary simulations using the Barcelona Basic Model have also been included, alongside BS model predictions, in order to get further enlightening insights into some of the main limitations and challenges facing both frameworks within the context of the experimental evidence resulting from the present research effort. In general, irrespective of the value of matric suction applied, the Barcelona Basic Model performs relatively well in predicting response at peak and critical state failure under low net confining pressure while the Bounding Surface Model performs relatively well under high net confining pressures. 相似文献
9.
The experimental evidence that cohesive and granular soils possess an elastic range in which the elasticity is both nonlinear and anisotropic—with stiffness and directional characteristics strongly dependent on stress and plastic strain (the so‐called ‘stress history’)—is given a formulation based on hyperelasticity. This is accomplished within the framework of elastoplastic coupling, through a new proposal of elastic potentials and a combined use of a plastic‐strain‐dependent fabric tensor and nonlinear elasticity. When used within a simple elastoplastic framework, the proposed model is shown to yield very accurate simulations of the evolution of elastic properties from initial directional stiffening to final isotropic degradation. Within the proposed constitutive framework, it is shown that predictions of shear band formation and evolution become closer to the existing experimental results, when compared to modelling in which elasticity does not evolve. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
10.
Jianhong Jiang Hoe I. Ling Victor N. Kaliakin Xiangyong Zeng Ching Hung 《Acta Geotechnica》2017,12(2):335-348
An anisotropic time-dependent bounding surface model for clays is developed by generalizing a previous time-independent model that adopts a flexible bounding surface. It is based on the framework for coupled elastoplasticity–viscoplasticity for clays and Perzyna’s overstress theory. Three viscoplastic parameters were introduced and explained in detail. The model was validated against undrained creep tests for both isotropically and anisotropically consolidated clays, undrained and drained stress relaxation tests on some undisturbed clays, and undrained triaxial tests with varying strain rates on natural Hong Kong marine deposit clay. The general agreement between the model simulations and test results was satisfactory. The varying effects of lower-level parameters were discussed on the undrained multistage stress relaxation response for normally consolidated soils which had been ignored in literature. The flexibility of the model in capturing the shear strengths, which is the unique feature of the current model, was shown in the simulations of time-dependent triaxial tests on Taipei silty clay. All the simulations show that the proposed model is a relatively practical model considering both anisotropy and time dependency of clays. 相似文献
11.
This paper describes a constitutive approach to model the behavior of rate‐dependent anisotropic structured clay. Rate‐sensitivity is modeled using overstress viscoplasticity. Clay structure is treated as a viscous phenomenon whereby the viscosity of the undisturbed structured clay is initially very high and the viscosity degrades or decreases with plastic straining until the intrinsic or residual viscosity is reached. A microstructure tensor approach is used to make the structured viscosity anisotropic; whereas, the intrinsic viscosity is assumed to be isotropic. The behavior of the constitutive model is compared with the measured response of two clays (Gloucester and St. Vallier clay) from Eastern Canada during triaxial compression tests on specimens trimmed at different orientations to the vertical. The comparisons show that the constitutive framework is able to describe the anisotropic and rate‐sensitive response of both clays. The response of the model is also examined for the more general case of anisotropic consolidated triaxial compression and extension. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
12.
A constitutive model that captures the material behavior under a wide range of loading conditions is essential for simulating complex boundary value problems. In recent years, some attempts have been made to develop constitutive models for finite element analysis using self‐learning simulation (SelfSim). Self‐learning simulation is an inverse analysis technique that extracts material behavior from some boundary measurements (eg, load and displacement). In the heart of the self‐learning framework is a neural network which is used to train and develop a constitutive model that represents the material behavior. It is generally known that neural networks suffer from a number of drawbacks. This paper utilizes evolutionary polynomial regression (EPR) in the framework of SelfSim within an automation process which is coded in Matlab environment. EPR is a hybrid data mining technique that uses a combination of a genetic algorithm and the least square method to search for mathematical equations to represent the behavior of a system. Two strategies of material modeling have been considered in the SelfSim‐based finite element analysis. These include a total stress‐strain strategy applied to analysis of a truss structure using synthetic measurement data and an incremental stress‐strain strategy applied to simulation of triaxial tests using experimental data. The results show that effective and accurate constitutive models can be developed from the proposed EPR‐based self‐learning finite element method. The EPR‐based self‐learning FEM can provide accurate predictions to engineering problems. The main advantages of using EPR over neural network are highlighted. 相似文献
13.
14.
On the one hand, it has been observed that liquefaction‐induced shear deformation of soils accumulates in a cycle‐by‐cycle pattern. On the other hand, it is known that heating could induce plastic hardening. This study deals with the constitutive modelling of the effect that heat may have on the cyclic mechanical properties of cohesive soils, a relatively new area of interest in soil mechanics. In this paper, after a presentation of the thermo‐mechanical framework, a non‐isothermal plasticity cyclic model formulation is presented and discussed. The model calibration is described based on data from laboratory sample tests. It includes numerical simulations of triaxial shear tests at various constant temperatures. Then, the model predictions are compared with experimental results and discussed in the final section. Both drained and undrained loading conditions are considered. The proposed constitutive model shows good ability to capture the characteristic features of behaviour. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
15.
A computational framework is presented for dynamic strain localization and deformation analyses of water‐saturated clay by using a cyclic elasto‐viscoplastic constitutive model. In the model, the nonlinear kinematic hardening rule and softening due to the structural degradation of soil particles are considered. In order to appropriately simulate the large deformation phenomenon in strain localization analysis, the dynamic finite element formulation for a two‐phase mixture is derived in the updated Lagrangian framework. The shear band development is shown through the distributions of viscoplastic shear strain, the axial strain, the mean effective stress, and the pore water pressure in a normally consolidated clay specimen. From the local stress–strain relations, more brittleness is found inside the shear bands than outside of them. The effects of partially drained conditions and mesh‐size dependency on the shear banding are also investigated. The effect of a partially drained boundary is found to be insignificant on the dynamic shear band propagation because of the rapid rate of applied loading and low permeability of the clay. Using the finer mesh results in slightly narrower shear bands; nonetheless, the results manifest convergency through the mesh refinement in terms of the overall shape of shear banding and stress–strain relations. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
16.
2D viscoplastic finite element modelling of slow landslides: the Portalet case study (Spain) 总被引：3，自引：1，他引：2
J. A. Fernández-Merodo J. C. García-Davalillo G. Herrera P. Mira M. Pastor 《Landslides》2014,11(1):29-42
This paper proposes a hydro-geomechanical finite element model to reproduce the kinematic behaviour of large slow landslides. The interaction between solid skeleton and pore fluids is modelled with a time dependent u–p w formulation and a groundwater model that takes into account recorded daily rainfall intensity. A viscoplastic constitutive model based on Perzyna’s theory is applied to reproduce soil viscous behaviour and the delayed creep deformation. The proposed model is applied to Portalet landslide (Central Spanish Pyrenees). This is an active paleo-landslide that has been reactivated by the construction of a parking area at the toe of the slope. The stability analysis reveals that, after the constructive solutions were undertaken, the slope is in a limit equilibrium situation. Nevertheless, time-dependent analysis reproduces the nearly constant strain rate (secondary creep) and the acceleration/deceleration of the moving mass due to hydrological changes. Overall, the model reproduces a 2-m displacement in the past 8 years that coincides with in situ monitoring data. The proposed model is useful for short- and mid-term predictions of secondary creep. However, long-time predictions remain uncertain, stability depends strongly on the position of the water table depth and new failures during tertiary creep due to soil temporal microstructural degradation are difficult to calibrate. 相似文献
17.
This paper presents a constitutive model for time‐dependent behaviour of granular material. The model consists of 2 parts representing the inviscid and viscous behaviour of granular materials. The inviscid part is a rate‐independent hypoplastic constitutive model. The viscous part is represented by a rheological model, which contains a high‐order term denoting the strain acceleration. The proposed model is validated by simulating some element tests on granular soils. Our model is able to model not only the non‐isotach behaviour but also the 3 creep stages, namely, primary, secondary, and tertiary creep, in a unified way. 相似文献
18.
This paper presents a theoretical framework to interpret the inception of unstable undrained creep in quasi‐saturated soils. For this purpose, the effect of gas bubbles occluded in the fluid phase is embedded into an augmented compressibility of the fluid mixture, while the mechanical characteristics of the solid skeleton have been simulated through a viscoplastic strain‐hardening model. This constitutive framework has been been used to formulate a theoretical platform able to detect runaway failures resulting from extended stages of undrained creep. It is shown that the conditions identifying the onset of spontaneous accelerations are governed by the same stability index associated with the initiation of static liquefaction. At variance with soils saturated by incompressible fluids, the conditions for undrained instability are altered by the appearance of the Skempton coefficient B, thus reflecting the beneficial effect of the fluid compressibility and its ability to decrease the liquefaction potential. The capabilities of the theory are verified through a sequence of undrained creep simulations showing the transition from stable to unstable behavior resulting from an increase of the degree of saturation. The proposed findings provide a conceptual framework to interpret the effects of gas bubbles in loose soils, as well as to assess effectiveness and longevity of liquefaction mitigation strategies based on desaturation technologies. 相似文献
19.
通过将Perzyna过应力理论与临界状态理论相结合,并引入Wheeler旋转硬化法则,提出一个能描述土体初始各向异性及应力诱发各向异性的三维弹黏塑性本构模型。模型考虑流变发生的下限,在三维应力空间,模型存在形状相似的静屈服面及动态加载面。采用缩放形式的幂函数。本构模型数值算法采用回映算法,借助ABAQUS软件UMAT子程序接口实现。并通过对三轴不排水蠕变试验的模拟,确定合适的积分步长。此后,分别对三轴不排水蠕变试验及常应变率三轴不排水剪切试验进行了模拟。模拟中通过设置不同参数值,可将模型退化为各向同性模型,并对这两种模拟结果进行了比较。模拟结果表明：(1) 对于三轴不排水蠕变,在低剪应力水平下,各向同性模型和各向异性模型模拟的结果相差不大,而在高剪应力水平下,各向异性模型模拟结果更接近试验结果;(2) 对于常应变率加载试验的模拟,模型合理反映了土体不排水强度随着加载速率的增大而增大现象。 相似文献
20.
A single‐surface elasto‐plastic model developed by Desai and his coworkers is used to predict the behaviour of an interface between sand and a steel plate. The loading in the experiments and in their predictions followed various stress and displacement paths. The results of predictions of the two‐ and three‐dimensional behaviour of the interface under both constant normal stress and constant normal stiffness conditions are presented. The predictions are compared with their corresponding experimental results. The model parameters were determined on the basis of 2‐D conventional experiments under the condition of constant normal stress and they were used in the prediction of the interface behaviour in various stress paths. There is, in general, a good agreement between the predicted and experimental results. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献