共查询到20条相似文献，搜索用时 109 毫秒
1.
一、海洋浮标网的发展海洋浮标的研制始于40年代末至50年代初,到60年代,浮标开始在海洋调查中试用,70年代中期才进入实用阶段。此后,美国、苏联、加拿大、英国、法国、日本等国都相继在各自近岸海域和世界大洋的若干海域构成局部浮标观测网。随着卫星遥感和卫星通讯设备的进一步完善,海洋浮标网得到了 相似文献
2.
海底地下水排泄(SGD)是近岸海洋化学和生态系统演化的重要驱动因素，其携带的大量物质对珊瑚礁发育和退化具有非常重要的影响。本文综述了珊瑚礁区的SGD特征及其对珊瑚礁发育和退化的潜在生态环境效应，SGD的珊瑚替代指标以及全球各海域SGD的高分辨率珊瑚记录研究进展，并以南海北部为例探讨珊瑚礁退化的主导因素及SGD的潜在影响。研究发现，目前珊瑚礁区，尤其是岸礁区长时间序列的SGD动态变化记录的研究极为薄弱；利用珊瑚骨骼的地球化学指标来重建局部海域的SGD通量的动态历史变化具有较强的可操作性；虽然SGD极有可能是以南海北部为代表的珊瑚礁区珊瑚礁退化的重要因素，但目前无论是政府机构还是公众对SGD的关注和重视相当有限。未来的研究应该聚焦于珊瑚礁区SGD及其携带物质通量的高分辨率珊瑚记录，进而探讨SGD对珊瑚礁发育和退化影响的关键过程与机制，并提出科学合理的应对建议。 相似文献
3.
海洋浮标是一种现代新的海洋观测工具。它的多种功能和长期连续探测能力,在海上现场监测手段中具有明显的优势。国外海洋浮标技术的研制始于四十年代末——五十年代初。六十年代,在海洋调查中开始试用海洋浮标。七十年代中期,浮标技术趋于成熟,进入实用阶段。近年来,随着电子技术、卫星通讯和微处理技术的发展和应用,海洋浮标技术获得了新的进展。一方面提高了锚泊浮标的测量能力,收集较多的海洋环境参数;另一方面研制了一批新型的专用浮标和漂流浮标,进行范围广泛的大洋调查及专题研究,为军事部门、气象部门、航海运输、鱼业捕捞、 相似文献
4.
近年来,受全球气候变化及极端天气的影响,全球范围频繁出现珊瑚礁白化现象,遥感SST已广泛应用于珊瑚白化的监测和预警中。海南岛近岸及北部湾海域的珊瑚礁近年也倍受白化压力,然而,遥感SST在海南岛近岸及北部湾海域珊瑚白化预警中的适用性尚不清楚。为此,本研究比较了3种常用的遥感SST数据（OISST、GHRSST和CoralTemp）在研究海域的异同及其在夏季珊瑚白化预警中的适用性。结果表明,GHRSST的SST最高、CoralTemp次之、OISST最低,OISST的偏差在2013年以前比较明显,GHRSST和CoralTemp在2003年之后比较接近;与浮标的现场观测值相比,2006—2020年CoralTemp的平均偏差和均方根误差分别为0.03 ℃和0.92 ℃,GHRSST为0.08 ℃和0.96 ℃,OISST为-0.25 ℃和1.21 ℃,CoralTemp在研究区域内更为准确;3种遥感SST计算的DHW与使用现场SST计算的趋势一致,CoralTemp的结果更为接近现场SST。因此,3种遥感SST资料中,CoralTemp相对来说更适用于研究海域。 相似文献
5.
介绍了我国船型海洋资料浮标体和锚泊系统的设计方案，该浮标可适用于远海、深海海域布放，定点实时获取布放海域的水文、气象等有关要素的现场参数。 相似文献
6.
暖水珊瑚礁生态系统是热带海域最具生物多样性和代表性的生态系统之一。本研究分析了全球变化背景下暖水珊瑚礁生态系统的变化和风险,开展了受损暖水珊瑚礁生态系统退化和消失的致灾因子归因分析,综述了暖水珊瑚礁生态系统的适应性与修复技术研究。分析表明:①过去几十年来,暖水珊瑚礁生态系统快速退化,包括大面积白化和死亡、多样性明显减少和生态功能显著衰退,主要归因于海洋升温与人类活动等致灾因子的影响;②在温室气体高排放浓度情景下(RCP 8.5),相比工业革命前,到本世纪中叶,南海升温将可能远超过2℃,这表明南海暖水珊瑚礁生态系统正在逼近其气候临界点,即全球升温高于2℃时,90%~99%以上的暖水珊瑚将消失;③1980年代以来,海洋升温、海洋热浪和强热带气旋等海洋气候变化致灾因子对南海暖水珊瑚的危害性(影响的强度、范围和时间)明显增加,对暖水珊瑚礁生态系统产生了严重的影响;与此同时,近岸海域的过度或破坏性捕捞、采挖和潜水等人类活动,对暖水珊瑚造成了严重损害,增加了暖水珊瑚的气候脆弱性,而这种人类活动既是局部的,也是全球性的现象,使得暖水珊瑚更难以适应全球变暖的影响。分析还表明,为了增强暖水珊瑚适应气候与环境变化的恢复力(韧性),人们开展了诸多受损珊瑚礁生态系统的适应性与修复研究,但主要是采用无性繁殖或结合人工基质的修复方式,而应用有性繁殖技术恢复受损珊瑚礁的方式仍较少;最近,暖水珊瑚耐热的基因适应性研究取得了重要进展,为暖水珊瑚适应全球变暖提供了一种新的途径。本研究最后探讨了中国受损珊瑚礁生态系统的修复问题与对策。 相似文献
7.
8.
目前尽管国内近海浮标实现了产品化，但深远海尚无定型可靠的深海综合观测浮标系统，基于此，中国科学院海洋研究所设计制作了深海综合观测浮标系统，其浮标体为柱台型结构，采用单点锚泊系留。整个系统主要由浮标体、系留子系统、观测子系统、数据采集处理控制子系统、通信子系统、供电子系统、检测子系统、安全报警子系统和岸基数据接收处理子系统等9部分组成。浮标系统通过搭载不同类型的传感器，实现对风速/风向、气温、相对湿度、气压、能见度、雨量、波浪、表层水温、表层盐度、表层溶解氧、表层叶绿素、表层浊度、剖面流速流向、剖面温盐深（最大深度可达1 000 m）、方位及浮标位置等要素进行实时观测，从而完成对海洋气象、水文和水质等要素的长期、连续、自动监测，并支持铱星和北斗等卫星通信方式，将观测数据实时的传输到岸基数据接收处理系统。近年来，深海综合观测浮标系统在热带西太平洋海域连续进行了4次海上应用，每次应用时间长达1 a。它提供了第一手的大洋上层和海气界面长时间序列的实时连续观测资料，促进了关于气候变化和深海大洋的研究工作。所研制的深海浮标达到目前国际同类产品（美国ATLAS浮标、日本TRITON浮标）的先进水平，并且在水下感应耦合传输等方面进行了创新，形成了自有特色。 相似文献
9.
早在五十年代,海洋科技工作者已开始利用浮标布设海洋调查仪器,进行海上观测的试验工作。目前被采用的浮标系统,大体有三种类型:(1)锚泊浮标系统,利用各类自含式海洋调査仪器进行测量,定期收回资料;(2)遥测浮标系统,利用无线电遥控和收发各种海洋观测数据;(3)漂移浮标系统,利用浮标本身的漂移,进行海流和其他要素的观测。本文主要介绍浅海锚泊浮标系统的设计和使用情况。
对锚泊浮标系统的研究和实验,许多国家已做了大量有成效的工作。目前关于浮标的设计和锚泊方法尚无統一意见,但是可以看出,大多趋向于采用水下浮标张缆锚泊。这种方法使得浮标系统比起遥测浮标系统来,较为轻小、经济、方便,适合于进行多站同步观测。国外在海洋调查中经常利用这种系统作较长期的海流观测。
我所在六十年代初就已开始了锚泊浮标系统的研究、实验,1964年进行了新的研究设计工作,并在“全国海洋仪器会战”期间,完成了整套系统的计算设计与海上实验,经过鉴定,建议作小批量生产。
近年来,国家海洋局第一海洋研究所、中国科学院南海海洋研究所利用该浮标系统作过多次海上试用,取得了海流长期观测资料,初步考验了该系统的性能。我们最近又对某些部件作了一定的改进,并进行了海上实验。但是,实验也表明:此方法不宜在渔场区和台风盛行季节使用,因易被渔网拖损和丢失。现综合报告如下。 相似文献
10.
Argo-认识和预测气候变化的全球海洋观测计划 总被引：1，自引：2，他引：1
1 全球海洋观测网 (Argo)为了解全球气候的变化 ,海洋学界正在做一项雄心勃勃的事业 ,即设计并部署一个全球海洋观测系统 ,以便对海洋从季节到十年间的变化作前所未有的长期跟踪观测。这项计划的实施 ,将使人类对气候的认识和预测向前迈出一大步。全球海洋观测系统的现场支柱就是 Argo剖面浮标网 ,将为人类提供一个全球海洋次表层数据库。Argo剖面浮标观测网将由 3 0 0 0个自动仪器组成 (图 1 ) ,每个浮标每隔 1 0天发送一组取自 2 0 0 0 m到海面的温度和盐度剖面资料 (图 2、3 )。在全球大洋内每隔大约 3个经纬度布设一个浮标 ,其数据通… 相似文献
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
13.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
14.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
15.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
16.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
20.