首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
A new modified magnitude scale M S (20R) is elaborated. It permits us to extend the teleseismic magnitude scale M S (20) to the regional epicenter distances. The data set used in this study contains digital records at 12 seismic stations of 392 earthquakes that occured in the northwest Pacific Ocean in the period of 1993–2008. The new scale is based on amplitudes of surface waves of a narrow range of the periods (16–25 s) close to the period of 20 s, for distances of 80–3000 km. The digital Butterworth filter is used for processing. On the basis of the found regional features concerning distance dependence for seismic wave attenuation, all the stations of the region have been subdivided into two groups, namely, “continental” and “island-arc.” For each group of stations, its own calibration function is proposed. Individual station corrections are used to compensate for the local features.  相似文献   

2.
We use 576 earthquakes of magnitude, M w, 3.3 to 6.8 that occurred within the region 33° N–42.5° N, 19° E–30° E in the time period 1969 to 2007 to investigate the stability of the relation between moment magnitude, M w, and local magnitude, M L, for earthquakes in Greece and the surrounding regions. We compare M w to M L as reported in the monthly bulletins of the National Observatory of Athens (NOA) and to M L as reported in the bulletins of the Seismological Station of the Aristotle University of Thessaloniki. All earthquakes have been analyzed through regional or teleseismic waveform inversion, to obtain M w, and have measured maximum trace amplitudes on the Wood–Anderson seismograph in Athens, which has been in operation since 1964. We show that the Athens Wood–Anderson seismograph performance has changed through time, affecting the computed by NOA M L by at least 0.1 magnitude units. Specifically, since the beginning of 1996, its east–west component has been recording systematically much larger amplitudes compared to the north–south component. From the comparison between M w and M L reported by Thessaloniki, we also show that the performance of the sensors has changed several times through time, affecting the calculated M L’s. We propose scaling relations to convert the M L values reported from the two centers to M w. The procedures followed here can be applied to other regions as well to examine the stability of magnitude calculations through time.  相似文献   

3.
A disastrous earthquake with a magnitude M S = 8.0 (M W = 7.9), in China called “the 5.12 Wenchuan earthquake,” occurred on May 12, 2008, in Sichuan province on the border between the Sino-Tibetan Mountains and the Sichuan depression. The instrumental epicenter was registered in the southeastern part of Wenchuan county, and the hypocenter depth was 14 km. As the strongest and most destructive earthquake within mainland China, it caused numerous human losses and destruction of buildings and infrastructure. The seismic effect from the main shock and aftershocks was felt in many counties, towns, and villages, though Sichuan province suffered the most. The maximum intensity of the shocks was estimated at 11 degrees, according to the Chinese macroseismic scale. In the process of source opening, from the southern part of Wenchuan county to the vicinities of Quingchuan, a seismic fault system with a total length up to 240 km out-cropped on the earth’s surface, confined to the Longmenshan fault belt. The seismic fault system disturbed the original ground, resulting in the collapse or damage to various constructions, such as buildings, homes, bridges, roads, etc. Fault offsets had a dextral strike-slip and thrust kinematic combination. The earthquake generated several tens of thousands of landslides, rockfalls, and debris flows. Many dammed ponds appeared in the epicentral zone due to the activation of landslides. Thus, the geological effects turned out to be the most destructive factor in this case. At the same time, the seismic intensity of surface shaking was abnormally low even in direct proximity to the seismic fault system. Usually it was no more than 7–8 degrees. This macroseismic phenomenon may turn out to be rather typical for many major earthquakes.  相似文献   

4.
Earthquake surface rupture is the result of transformation from crustal elastic strain accumulation to permanent tectonic deformation. The surface rupture zone produced by the 2001 Kunlunshan earthquake (M w 7.8) on the Kusaihu segment of the Kunlun fault extends over 426 km. It consists of three relatively independent surface rupture sections: the western strike-slip section, the middle transtensional section and the eastern strike-slip section. Hence this implies that the Kunlunshan earthquake is composed of three earthquake rupturing events, i.e. the M w =6.8, M w =6.2 and M w ⩽=7.8 events, respectively. The M w =7.8 earthquake, along the eastern section, is the main shock of the Kunlunshan earthquake, further decomposed into four rupturing subevents. Field measurements indicate that the width of a single surface break on different sections ranges from several meters to 15 m, with a maximum value of less than 30 m. The width of the surface rupture zone that consists of en echelon breaks depends on its geometric structures, especially the stepover width of the secondary surface rupture zones in en echelon, displaying a basic feature of deformation localization. Consistency between the Quaternary geologic slip rate, the GPS-monitored strain rate and the localization of the surface ruptures of the 2001 Kunlunshan earthquake may indicate that the tectonic deformation between the Bayan Har block and Qilian-Qaidam block in the northern Tibetan Plateau is characterized by strike-slip faulting along the limited width of the Kunlun fault, while the blocks themselves on both sides of the Kunlun fault are characterized by block motion. The localization of earthquake surface rupture zone is of great significance to determine the width of the fault-surface-rupture hazard zone, along which direct destruction will be caused by co-seismic surface rupturing along a strike-slip fault, that should be considered before the major engineering project, residental buildings and life line construction. Supported by the National Natural Science Foundation of China (Grant No. 40474037) and the National Basic Research Program of China (Grant No. 2004CB418401)  相似文献   

5.
A great earthquake of M S=8.1 took place in the west of Kunlun Pass on November 14, 2001. The epicenter is located at 36.2°N and 90.9°E. The analysis shows that some main precursory seismic patterns appear before the great earthquake, e.g., seismic gap, seismic band, increased activity, seismicity quiet and swarm activity. The evolution of the seismic patterns before the earthquake of M S=8.1 exhibits a course very similar to that found for earthquake cases with M S≥7. The difference is that anomalous seismicity before the earthquake of M S=8.1 involves in the larger area coverage and higher seismic magnitude. This provides an evidence for recognizing precursor and forecasting of very large earthquake. Finally, we review the rough prediction of the great earthquake and discuss some problems related to the prediction of great earthquakes.  相似文献   

6.
The paper considers the Argun earthquake of July 22, 2011 (M w = 4.5), which occurred in the Argun River valley in a low-seismicity territory in China. The focal parameters of the earthquake (depth of the hypocenter, moment magnitude, scalar seismic moment, and focal mechanism) were determined by calculating the seismic moment tensor from the amplitude spectra of surface waves and the data on the signs of the first arrivals of body waves at regional stations. The solution of the focal mechanism makes it possible to assume a relationship between the earthquake focus and a fault with a northeastern strike bordering the southeastern side of the Argun Basin (in Chinese territory). The Argun earthquake was felt in Russia with an intensity of II–III to V at the epicentral distances up to 255 km. The intensity of shaking did not exceed values suggested by new GSZ-2012 and GSZ-2014 seismic zoning maps of Russian territory. Nevertheless, the question on the possible occurrence of stronger earthquakes in the studied region remains open.  相似文献   

7.
The seismic waves excited by the M w 7.6 Olyutorskii earthquake that occurred on April 20, 2006 in the Koryak Upland gave rise to water-level changes in five wells situated in continental areas of Kamchatka at hypocentral distances of 750–1150 km. We describe the effects due to seismic waves, as well as the water-level anomalies for February–April 2006 before the earthquake. We used an original technique for the processing of water-level records based on the study of barometric and tidal water-level responses in order to estimate the volume strain in water-saturated rocks during synchronous level variations at two wells. We discuss possible mechanisms for producing anomalous water-level changes due to elastic deformation of monitored groundwater reservoirs and to crack dilatancy in the water-saturated rocks.  相似文献   

8.
The recent seismicity catalogue of metropolitan France Sismicité Instrumentale de l’Hexagone (SI-Hex) covers the period 1962–2009. It is the outcome of a multipartner project conducted between 2010 and 2013. In this catalogue, moment magnitudes (M w) are mainly determined from short-period velocimetric records, the same records as those used by the Laboratoire de Détection Géophysique (LDG) for issuing local magnitudes (M L) since 1962. Two distinct procedures are used, whether M L-LDG is larger or smaller than 4. For M L-LDG >4, M w is computed by fitting the coda-wave amplitude on the raw records. Station corrections and regional properties of coda-wave attenuation are taken into account in the computations. For M L-LDG ≤4, M w is converted from M L-LDG through linear regression rules. In the smallest magnitude range M L-LDG <3.1, special attention is paid to the non-unity slope of the relation between the local magnitudes and M w. All M w determined during the SI-Hex project is calibrated according to reference M w of recent events. As for some small events, no M L-LDG has been determined; local magnitudes issued by other French networks or LDG duration magnitude (M D) are first converted into M L-LDG before applying the conversion rules. This paper shows how the different sources of information and the different magnitude ranges are combined in order to determine an unbiased set of M w for the whole 38,027 events of the catalogue.  相似文献   

9.
In this paper, we calculated the seismic pattern of instrumental recorded small and moderate earthquakes near the epicenter of the 1303 Hongtong M=8 earthquake, Shanxi Province. According to the spatial distribution of small and moderate earthquakes, 6 seismic dense zones are delineated. Temporal distribution of M L≥2 earthquakes since 1970 in each seismic dense zone has been analyzed. Based on temporal distribution characteristics and historical earthquake activity, three types of seismicities are proposed. The relationship between seismic types and crustal medium is analyzed. The mechanism of three types is discussed. Finity of strong earthquake recurrence is proposed. Seismic hazard in mid-long term and diversity of earthquake disaster in Shanxi seismic belt are discussed.  相似文献   

10.
Sliding-window cross-correlation method is firstly adopted to identify sPn phase, and to constrain focal depth from regional seismograms, by measuring the time separation between sPn and Pn phases. We present the focal depths of the 17 moderate-sized aftershocks (M S⩾5.0) of the Wenchuan M S8.0 earthquake, using the data recorded by the regional seismic broadband networks of Shaanxi, Qinghai, Gansu, Yunnan and Sichuan. Our results show focal depths of aftershocks range from 8 to 20 km, and tend to cluster at two average depths, separate at 32.5°N, i.e., 11 km to the south and 17 km to the north, indicating that these aftershocks are origin of upper-to-middle crust. Combined with other results, we suggest that the Longmenshan fault is not a through-going crustal fault and the Pingwu-Qingchuan fault may be not the northward extension of the Longmenshan thrust fault. Supported by the National Natural Science Foundation of China (Grant Nos. 40604009 and 40574040) and Special Project for the Fundamental R & D of Institute of Geophysics, China Earthquake Administration (Grant No.DQJB08B20)  相似文献   

11.
The results of detailed seismological observations with bottom seismographs in the Central Kurile segment in August-September, 2006 are discussed. The system of six bottom seismographs was placed on the island slope of the Kurile deep-sea trench southeast of Urup Island and southwest of the Bussol Strait. Over 230 earthquakes with M LH = 0.5–5.5 were registered in the area with a radius of 150 km around the center of the observation system at depths up to 300 km during 16 days. Records of 80 earthquakes with hypocenters in the earth crust (h = 0–30 km) beneath the island slope of the Kurile deep-sea trench were first obtained by bottom seismographs. These data are inconsistent with previous concepts of aseismicity of this zone. The discovery of the unique morphological structure of the Benioff zone beneath the central Kurile Arc represents the most important result of detailed seismological observations. The zone consists of an inner seismoactive subzone, which is located beneath the island slope of the arc at depths of 15–210 km, being characterized by an angle of incline of 50° under the latter and crosses the ocean bottom approximately 80 km away from the trench axis, and outer low-activity subzone. The latter is traceable beyond the trench almost parallel to the inner zone beginning from a depth of 50 km below the sea bottom up to a depth of approximately 300 km. Due to the slightly lower incline (∼45°) of the outer subzone, both subzones gradually converge downward. The integral thickness of the Benioff zone varies from 150 km in its upper part to 125 km at depths of 210–260 km. The medium sandwiched between these subzones is practically aseismic. The reality of this defined structure is confirmed by the distribution of aftershocks of the earthquake that occurred on November 15, 2006 (M = 8.3). These seismic events served as foreshocks for the subsequent strong earthquake of January 13, 2007 (M = 8.1) with the hypocenter located beyond the trench under the ocean bottom. Such a structure of this zone within the central Kurile Arc segment is unique, having no analogues either in the flanks of the Kurile-Kamchatka Arc or other arcs. The results of detailed seismological observations obtained two months before the first of the catastrophic Central Kurile earthquakes appeared to be typical for the period of foreshocks (the lower seismic activity of the Simushir block, which hosted the hypocenter of the earthquake that occurred on November 15, 2006, particularly at depths of 0–50 km, the gentler incline of the recurrence plot, and other features).  相似文献   

12.
The complex seismotectonic studies of the pleistoseist area of the Ilin-Tas earthquake (Ms = 6.9), one of the strongest seismic events ever recorded by the regional seismic network in northeastern Russia, are carried out. The structural tectonic position, morphotectonic features of present-day topography, active faults, and types of Cenozoic deformations of the epicentral zone are analyzed. The data of the instrumental observations are summarized, and the manifestations of the strong seismic events in the Yana–Indigirka segment of the Cherskii seismotectonic zone are considered. The explanation is suggested for the dynamical tectonic setting responsible for the Andrei-Tas seismic maximum. This setting is created by the influence of the Kolyma–Omolon indenter, which intrudes into the Cherskii seismotectonic zone from the region of the North American lithospheric plate and forms the main seismogenic structures of the Yana–Indigirka segment in the frontal zone (the Ilin-Tas anticlinorium). The highest seismic potential is noted in the Andrei- Tas block—the focus of the main tectonic impacts from the Kolyma–Omolon superterrane. The general trend of this block coincides with the orientation of the major axis of isoseismal ellipses (azimuth 50°–85°), which were determined from the observations of macroseismic effects on the ground after the Uyandina (Ms = 5.6), Andrei-Tas (Ms = 6.1), and Ilin-Tas (Ms = 6.9) earthquakes.  相似文献   

13.
The work presents statistical methods for estimating the distribution parameters of rare, strong earthquakes. Using the two main theorems of extreme value theory (EVT), the distribution of T-maximum (the maximum magnitude over the time period T). Two methods for estimating the parameters of this distribution are proposed using the Generalized Pareto Distribution (GPD) and the General Extreme Value Distribution (GEV). In addition, the that allow the determination of the distribution of the T-maximum for an arbitrary value of T are proposed. The approach being used clarifies the nature of the instability of the widely accepted M max parameter. In the work, instead of unstable values of the M max parameter, the robust parameter Q T (q), the q level quantile for the distribution of the T-maximum, is proposed to be used. The described method has been applied to the Harvard Catalogue of Seismic Moments of 1977–2006 and to the Magnitude Catalogue for Fennoscandia in 1900–2005. Moreover, the estimates of parameters of the corresponding GPD and GEV distributions, in particular, the most interesting shape parameter and the values of the M max and Q T (q) parameters are given.  相似文献   

14.
The 2017 Guptkashi earthquake occurred in a segment of the Himalayan arc with high potential for a strong earthquake in the near future. In this context, a careful analysis of the earthquake is important as it may shed light on source and ground motion characteristics during future earthquakes. Using the earthquake recording on a single broadband strong-motion seismograph installed at the epicenter, we estimate the earthquake’s location (30.546° N, 79.063° E), depth (H?=?19 km), the seismic moment (M0?=?1.12×1017 Nm, M w 5.3), the focal mechanism (φ?=?280°, δ?=?14°, λ?=?84°), the source radius (a?=?1.3 km), and the static stress drop (Δσ s ~22 MPa). The event occurred just above the Main Himalayan Thrust. S-wave spectra of the earthquake at hard sites in the arc are well approximated (assuming ω?2 source model) by attenuation parameters Q(f)?=?500f0.9, κ?=?0.04 s, and fmax?=?infinite, and a stress drop of Δσ?=?70 MPa. Observed and computed peak ground motions, using stochastic method along with parameters inferred from spectral analysis, agree well with each other. These attenuation parameters are also reasonable for the observed spectra and/or peak ground motion parameters in the arc at distances ≤?200 km during five other earthquakes in the region (4.6?≤?M w ?≤?6.9). The estimated stress drop of the six events ranges from 20 to 120 MPa. Our analysis suggests that attenuation parameters given above may be used for ground motion estimation at hard sites in the Himalayan arc via the stochastic method.  相似文献   

15.
On August 8, 2017, a M7.0 earthquake occurred in Jiuzhaigou County, Sichuan Province, China, resulting in significant casualties and property damage. Therefore, it is critical to identify the areas of potential aftershocks before reconstruction and re-settling people to avoid future disasters. Based on the elastic dislocation theory and a multi-layered lithospheric model, we calculate the Coulomb failure stress changes caused by the Wenchuan and Jiuzhaigou earthquakes, discuss the relationship between the Mw7.9 Wenchuan and M7.0 Jiuzhaigou earthquakes, and analyze the influence of the aftershock distribution and stress changes on the major faults in this region caused by the Jiuzhaigou earthquake. The co- and post-seismic stress changes caused by the Wenchuan earthquake significantly increased the stress accumulation at the hypocenter of the Jiuzhaigou earthquake. Therefore, the occurrence of the Jiuzhaigou earthquake was probably stimulated by the Wenchuan earthquake. The aftershock distribution is well explained by the co-seismic stress changes of the Jiuzhaigou earthquake. The stress accumulation and corresponding seismic hazard on the Maqu-Heye segment of the East Kunlun fault and the northern extremity of the Huya fault has been further increased by the Jiuzhaigou earthquake.  相似文献   

16.
We described the 2014 January 17 earthquake (M w?=?4.3) occurred on the Siberian platform in the area of sublongitudinal part of the Angara river in the zone of possible influence of two large reservoirs—Ust-Ilimsk and Boguchan. This is the first event of such magnitude recorded in this previously aseismic area during the whole period of instrumental observations. A seismic moment, a moment magnitude, a hypocentral depth, and a focal mechanism of the event were calculated on the basis of surface wave amplitude spectra. Analysis of the geological and geophysical data showed that the earthquake origin is connected with high-velocity gradient zone located at the border of the Late Proterozoic cover and the Precambrian basement of the Siberian platform. Some evidences for a natural character of the earthquake were considered.  相似文献   

17.
At GMT time 13:19, August 8, 2017, an Ms7.0 earthquake struck the Jiuzhaigou region in Sichuan Province, China, causing severe damages and casualties. To investigate the source properties, seismogenic structures, and seismic hazards, we systematically analyzed the tectonic environment, crustal velocity structure in the source region, source parameters and rupture process, Coulomb failure stress changes, and 3-D features of the rupture plane of the Jiuzhaigou earthquake. Our results indicate the following: (1) The Jiuzhaigou earthquake occurred on an unmarked fault belonging to the transition zone of the east Kunlun fault system and is located northwest of the Huya fault. (2) Both the mainshock and aftershock rupture zones are located in a region where crustal seismic velocity changes dramatically. Southeast to the source region, shear wave velocity at the middle to lower crust is significantly low, but it rapidly increases northeastward and lies close to the background velocity across the rupture fault. (3) The aftershock zone is narrow and distributes along the northwest-southeast trend, and most aftershocks occur within a depth range of 5–20 km. (4) The focal mechanism of the Jiuzhaigou earthquake indicates a left-lateral strike-slip fault, with strike, dip, and rake angles of 152°, 74° and 8°, respectively. The hypocenter depth measures 20 km, whereas the centroid depth is about 6 km. The co-seismic rupture mainly concentrates at depths of 3–13 km, with a moment magnitude (Mw) of 6.5. (5) The co-seismic rupture also strengthens the Coulomb failure stress at the two ends of the rupture fault and the east segment of the Tazang fault. Aftershocks relocation results together with geological surveys indicate that the causative fault is a near vertical fault with notable spatial variations: dip angle varies within 66°–89° from northwest to southeast and the average dip angle measures ~84°. The results of this work are of fundamental importance for further studies on the source characteristics, tectonic environment, and seismic hazard evaluation of the Jiuzhaigou earthquake.  相似文献   

18.
The relation between the gravity variation features and M S=8.1 earthquake in Qinghai-Xizang monitoring area is analyzed preliminarily, by using spatial dynamic variation results of regional gravity field from absolute gravity and relative gravity observation in 1998 and 2000. The results show that: 1) M S=8.1 earthquake in Kulun mountain pass western occurred in the gravity variation high gradient near gravity’s high negative variation; 2) The main tectonic deformation and energy accumulation before M S=8.1 earthquake are distributed at south side of the epicenter; 3) The range of gravity’s high negative variation at east of the M S=8.1 earthquake epicenter relatively coincides with that rupture region according to field geology investigation; 4) Gravity variation distribution in high negative value region is just consistent with the second shear strain’s high value region of strain field obtained from GPS observation.  相似文献   

19.
We propose a method that employs the squared displacement integral (ID2) to estimate earthquake magnitudes in real time for use in earthquake early warning (EEW) systems. Moreover, using τ c and P d for comparison, we establish formulas for estimating the moment magnitudes of these three parameters based on the selected aftershocks (4.0 ≤ M s  ≤ 6.5) of the 2008 Wenchuan earthquake. In this comparison, the proposed ID2 method displays the highest accuracy. Furthermore, we investigate the applicability of the initial parameters to large earthquakes by estimating the magnitude of the Wenchuan M s 8.0 mainshock using a 3-s time window. Although these three parameters all display problems with saturation, the proposed ID2 parameter is relatively accurate. The evolutionary estimation of ID2 as a function of the time window shows that the estimation equation established with ID2 Ref determined from the first 8-s of P wave data can be directly applicable to predicate the magnitudes of 8.0. Therefore, the proposed ID2 parameter provides a robust estimator of earthquake moment magnitudes and can be used for EEW purposes.  相似文献   

20.
A MS8.0 earthquake occurred in Wenchuan County, Sichuan Province, China, on May 12, 2008, and subsequently, numerous aftershocks followed. We obtained the moment tensor solutions and source time functions (STFs) for the Wenchuan earthquake and its seven larger aftershocks (MS5.0～6.0) by a new technique of moment tensor inversion using the broadband and long-period seismic waveform data from the Global Seismic Network (GSN). Firstly, the theoretical background and technical flow of the new technique was briefly introduced, and an aftershock of the Wenchuan earthquake sequence was employed to illustrate the real procedure for inverting the moment tensor; secondly, the moment tensor solutions and STFs of the eight events, including the main shock, were presented, and finally, the interpretation of the results was made. The agreement of our results with the GCMT results indicates the new approach is efficient and feasible. By using this approach, not only the moment tensor solution can be obtained but also the STF can be retrieved; the inverted STFs indicate that the source rupture process may be complicated even for the moderate earthquakes. The inverted focal mechanisms of the Wenchuan earthquake sequence show that the most of the aftershocks occurred in the main faults of the Longmenshan fault zone with predominantly thrustingwith minor right-lateral strike-slip component, but some of them may have occurred in the subfaults with strike-slip faulting in the vicinity of the main faults.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号