首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Receiver functions are widely employed to detect P-to-S converted waves and are especially useful to image seismic discontinuities in the crust. In this study we used the P receiver function technique to investigate the velocity structure of the crust beneath the Northwest Zagros and Central Iran and map out the lateral variation of the Moho boundary within this area. Our dataset includes teleseismic data (M b ≥ 5.5, epicentral distance from 30° to 95°) recorded at 12 three-component short-period stations of Kermanshah, Isfahan and Yazd telemetry seismic networks. Our results obtained from P receiver functions indicate clear Ps conversions at the Moho boundary. The Moho depths were firstly estimated from the delay time of the Moho converted phase relative to the direct P wave beneath each network. Then, we used the P receiver function inversion to find the properties of the Moho discontinuity such as depth and velocity contrast. Our results obtained from PRF are in good agreement with those obtained from the P receiver function modeling. We found an average Moho depth of about 42 km beneath the Northwest Zagros increasing toward the Sanandaj-Sirjan Metamorphic Zone and reaches 51 km, where two crusts (Zagros and Central Iran) are assumed to be superposed. The Moho depth decreases toward the Urmieh-Dokhtar Cenozoic volcanic belt and reaches 43 km beneath this area. We found a relatively flat Moho beneath the Central Iran where, the average crustal thickness is about 42 km. Our P receiver function modeling revealed a shear wave velocity of 3.6 km/s in the crust of Northwest Zagros and Central Iran increasing to 4.5 km/s beneath the Moho boundary. The average shear wave velocity in the crust of UDMA as SSZ is 3.6 km/s, which reaches to 4.0 km/s while in SSZ increases to 4.3 km/s beneath the Moho.  相似文献   

2.
Variations in crustal thickness in the Zagros determined by joint inversion of P wave receiver functions (RFs) and Rayleigh wave group and phase velocity dispersion. The time domain iterative deconvolution procedure was employed to compute RFs from teleseismic recordings at seven broadband stations of INSN network. Rayleigh wave phase velocity dispersion curves were estimated employing two-station method. Fundamental mode Rayleigh wave group velocities for each station is taken from a regional scale surface wave tomographic imaging. The main variations in crustal thickness that we observe are between stations located in the Zagros fold and thrust belt with those located in the Sanandaj–Sirjan zone (SSZ) and Urumieh–Dokhtar magmatic assemblage (UDMA). Our results indicate that the average crustal thickness beneath the Zagros Mountain Range varies from ～46 km in Western and Central Zagros beneath SHGR and GHIR up to ～50 km beneath BNDS located in easternmost of the Zagros. Toward NE, we observe an increase in Moho depth where it reaches ～58 km beneath SNGE located in the SSZ. Average crustal thickness also varies beneath the UDMA from ～50 km in western parts below ASAO to ～58 in central parts below NASN. The observed variation along the SSZ and UDMA may be associated to ongoing slab steepening or break off in the NW Zagros, comparing under thrusting of the Arabian plate beneath Central Zagros. The results show that in Central Iran, the crustal thickness decrease again to ～47 km below KRBR. There is not a significant crustal thickness difference along the Zagros fold and thrust belt. We found the same crystalline crust of ～34 km thick beneath the different parts of the Zagros fold and thrust belt. The similarity of crustal structure suggests that the crust of the Zagros fold and thrust belt was uniform before subsidence and deposition of the sediments. Our results confirm that the shortening of the western and eastern parts of the Zagros basement is small and has only started recently.  相似文献   

3.
The 28 February, 2006 Tiab earthquake (Mw 6.0), is the first earthquake to have occurred in the transition zone between the Zagros continental collision and the Makran subduction zone for which the aftershock sequence is recorded by a temporary local seismic network. The epicentral distribution of the aftershocks is diffuse and we cannot define a simple alignment at the surface. The depth of the aftershocks increases gently northward and they are primarily concentrated between 15 and 21 km depth, implying a deeper seismogenic layer than the Zagros. Very low-angle thrust faulting deduced from this local study supports thrusting of the Arabian plate beneath central Iran at the southeastern end of the Zagros as suggested previously based on teleseismic data. The focal mechanism of the main shock indicates a thrust mechanism similar to that of other strong earthquakes in this region, while most of the focal mechanisms of the aftershocks are dominantly strike-slip. We propose that the strike-slip mechanisms belong to right-lateral fault systems that accommodate differential motion at the transition between the Zagros collision zone and the Makran subduction zone. If so, this suggests that the convergence between Arabia and central Iran is at present accommodated along the transition zone by a partitioning process.  相似文献   

4.
The study of mantle lithosphere plays a key role to reveal predominant tectonic setting process of a region. The current geological and tectonic setting of Iran is due to the ongoing continental–continental collision of the Arabian and Eurasian plates. We applied a combined P and S receiver function analysis to the teleseismic data of nine permanent broadband seismic stations of the International Institute of Earthquake Engineering and Seismology located in different tectonic zones of Iranian plateau. More than 4 years of data were used to estimate the thickness of the crust and mantle lithosphere. According to our results, the crust is 50 km thick beneath the Zagros fold and thrust belt (ZFTB). We found the maximum Moho depth of approximately 70 km under the Sanandaj-Sirjan zone (SSZ) indicating the overthrusting of the crust of Central Iran onto the Zagros crust along the main Zagros thrust (MZT). Below the northeasternmost part of the Urumieh–Dokhtar Magmatic Arc (UDMA) and Central Iran, the Moho becomes shallower and lies at 40 km depth. Towards northeast, beneath the Alborz zone, the crust is 55 km thick. Based on S receiver functions, we provided new insights into the thickness of the Arabian and Eurasian lithospheres. The location of the boundary between these plates was estimated to be beneath the SSZ, which is slightly shifted northeastward relative to the surficial expression of the MZT. Furthermore, the Arabian plate is characterized by the relatively thick lithosphere of about 130 km beneath the ZFTB reaching 150 km beneath the SSZ, where the thickest crust was also observed. This may imply that the shortening across the Zagros is accommodated by lithospheric thickening. In contrast, UDMA and Central Iran are recognized by the thin lithosphere of about 80–85 km. This thin lithosphere may be associated with the asthenospheric upwelling caused by either lithospheric delamination or Neo-Tethys slab detachment beneath the Zagros collision zone.  相似文献   

5.
The microseismicity of the southeastern-most Zagros is examined by high-resolution data recorded by a temporary dense local seismic network. The seismicity defines a diffuse pattern, mostly located beneath folds in the southern part of the High Zagros Fault (HZF). Seismicity dips gently northward in the depth range 6–25 km, implying slip on a major intracrustal thrust fault extending to the north of the Main Zagros Reverse Fault (MZRF) which seems to connect to the Mountain Frontal Fault (MFF). Furthermore, observed focal mechanisms suggest transpressive motion on the HZF located west of the Zendan-Minab-Palami (ZMP) fault system and striking obliquely to the convergent motion. These observations suggest that the transition zone between the Zagros continental collision zone and the Makran oceanic subduction zone is not confined to the east of the ZMP and some part of the this diffuse transition is accommodated north of the Hormuz Strait in the west by partitioning between strike-slip and shortening components. The Zagros reverse domain is terminated by a transpressive tectonic regime. Moho depth beneath the MZRF, deduced from receiver functions, is almost 45 km thinner than is observed in the central and northern parts of the Zagros. These observations support a model of active underthrusting of the Arabian plate beneath central Iran in the southeastern-most Zagros.  相似文献   

6.
For the first time, we present the variation of crust–mantle boundary beneath the northeast Iran continental collision zone which is genetically part of the Alpine–Himalayan orogeny and beneath Central Iran which is a less-deformed tectonic block. The boundary was imaged by stacking teleseismic P–S converted phases and shows a strong variation of Moho from 27.5 km under Central Iran to 55.5 km beneath the Binalud foreland basin. The thickest crust is not located beneath the high topography of the Kopeh Dagh and Binalud mountain ranges suggesting that these mountain ranges are not supported by a crustal root. The simple gravity modeling of the Bouguer anomaly supports this idea.  相似文献   

7.
We invert S-wave velocities for the 3D upper-mantle temperatures, in which the position with a temperature crossing the 1300℃ adiabat is corresponding to the top of the seismic low velocity zone. The temperatures down to the depth of 80 km are then calculated by solving steady-state thermal conduction equation with the constraints of the inverted upper-mantle temperatures and the surface temperatures, and then surface heat flows are calculated from the crustal temperatures. The misfit between the calculated and observed surface heat flow is smaller than 20% for most regions. The result shows that, at a depth of 25 km, the crustal temperature of eastern China (500―600℃) is higher than that of western China (<500℃). At a depth of 100 km, temperatures beneath eastern and southeastern China are higher than the adiabatic temperature of 1300℃, while that beneath west China is lower. The Tarim craton and the Sichuan basin show generally low temperature. At a depth of 150 km, temperatures beneath south China, eastern Yangtze craton, North China craton and around the Qiangtang terrane are higher than the adiabatic temperature of 1300℃, but is the lowest beneath the Sichuan basin and the regions near the Indian-Eurasian collision zone. At a depth of 200 km, very low temperature occurs beneath the Qinghai-Tibet Plateau and the south to the Tarim craton.  相似文献   

8.
Crustal structure of Dabieshan orogenic belt   总被引：2，自引：0，他引：2  
The crustal structures ofP velocity and density on the deep seismic sounding profile across the Ilabieshan orogenic belt are presented. There is a 5-km-thick crustal “root” between the Yuexi and Xiaotian where the elevation is highest on the profile. An apparent Moho offset of 4. 5 km beneath the Xiaotian-Mozitan fault marks the paleo-suture of the Triassic collision. A high-velocity anomaly zone at the depth below 3 km beneath the ultra-high pressure (UHP) zone may be correlated to the higher content of UHP metamorphic rocks. Project supported by the National Natural Science Foundation of China and the Joint Earthquake Science Foundation.  相似文献   

9.
Two-dimensional crustal velocity models are derived from passive seismic observations for the Archean Karelian bedrock of north-eastern Finland. In addition, an updated Moho depth map is constructed by integrating the results of this study with previous data sets. The structural models image a typical three-layer Archean crust, with thickness varying between 40 and 52 km. P wave velocities within the 12–20 km thick upper crust range from 6.1 to 6.4 km/s. The relatively high velocities are related to layered mafic intrusive and volcanic rocks. The middle crust is a fairly homogeneous layer associated with velocities of 6.5–6.8 km/s. The boundary between middle and lower crust is located at depths between 28 and 38 km. The thickness of the lower crust increases from 5–15 km in the Archean part to 15–22 km in the Archean–Proterozoic transition zone. In the lower crust and uppermost mantle, P wave velocities vary between 6.9–7.3 km/s and 7.9–8.2 km/s. The average Vp/Vs ratio increases from 1.71 in the upper crust to 1.76 in the lower crust.The crust attains its maximum thickness in the south-east, where the Archean crust is both over- and underthrust by the Proterozoic crust. A crustal depression bulging out from that zone to the N–NE towards Kuusamo is linked to a collision between major Archean blocks. Further north, crustal thickening under the Salla and Kittilä greenstone belts is tentatively associated with a NW–SE-oriented collision zone or major shear zone. Elevated Moho beneath the Pudasjärvi block is primarily explained with rift-related extension and crustal thinning at ∼2.4–2.1 Ga.The new crustal velocity models and synthetic waveform modelling are used to outline the thickness of the seismogenic layer beneath the temporary Kuusamo seismic network. Lack of seismic activity within the mafic high-velocity body in the uppermost 8 km of crust and relative abundance of mid-crustal, i.e., 14–30 km deep earthquakes are characteristic features of the Kuusamo seismicity. The upper limit of seismicity is attributed to the excess of strong mafic material in the uppermost crust. Comparison with the rheological profiles of the lithosphere, calculated at nearby locations, indicates that the base of the seismogenic layer correlates best with the onset of brittle to ductile transition at about 30 km depth.We found no evidence on microearthquake activity in the lower crust beneath the Archean Karelian craton. However, a data set of relatively well-constrained events extracted from the regional earthquake catalogue implies a deeper cut-off depth for earthquakes in the Norrbotten tectonic province of northern Sweden.  相似文献   

10.
We determined crustal structure along the latitude 30°N through the eastern Tibetan Plateau using a teleseismic receiver function analysis. The data came mostly from seismic stations deployed in eastern Tibet and western Sichuan region from 2004 to 2006. Crustal thickness and Vp/Vs ratio at each station were estimated by the H–k stacking method. On the profile, the mean crustal thickness and Vp/Vs ratio were found to be 62.3 km and 1.74 in the Lhasa block, 71.2 km and 1.79 near the Bangong–Nujiang suture, 66.3 km and 1.80 in the Qiangtang block, 59.8 km and 1.81 in the Songpan–Garze block, and 42.9 km and 1.76 in the Yangtze block, respectively. The estimated crustal thicknesses are consistent with predictions based on the topography and the Airy isostasy, except near the Bangong–Nujiang suture and in the Qiangtang block where the crust is 5–10 km thicker than predicted, indicating that the crust may be denser, possibly due to mafic underplating. We also inverted receiver functions for crustal velocity structure along the profile, which reveals a low S-wave velocity zone in the lower crust beneath the eastern Tibetan Plateau, although the extent of the low-velocity zone varies considerably. The low-velocity zone, together with previous results, suggests limited partial melting and localized crustal flow in the lower crust of the eastern Tibetan Plateau.  相似文献   

11.
In order to investigate crustal structure beneath the eastern Marmara region, a seismic refraction survey was conducted across the North Anatolian Fault (NAF) zone in north west Turkey. Two reversed profiles across two strands of the NAF zone were recorded in the Armutlu Highland where a tectonically active region was formed by different continents. We used land explosions in boreholes and quarry blasts as seismic sources. A reliable crustal velocity and depth model is obtained from the inversion of first arrival travel times. The velocity-depth model will improve the positioning of the earthquake activities in this active portion of the NAF. A high velocity anomaly (5.6–5.8 km s−1) in the central highland of Armutlu block and the low velocity (4.90 km s−1) pattern north of Iznik Lake are the two dominant features. The crustal thickness is about 26 ± 2 km in the north and increases to about 32 ± 2 km beneath the central Armutlu block in the south. P-wave velocities are about 3.95 km s−1 to 4.70 km s−1 for the depth range between about 1 km and 5 km in the upper crust. The eastern Marmara region has different units of upper crust with velocities varying with depth to almost 8 km. The high upper crust velocities are associated with Armutlu metamorphic rocks, while the low velocity anomalies are due to unconsolidated sedimentary sequences. The western side of Armutlu block has complex tectonics and is well known for geothermal sources. If these sources are continuous throughout the portions of the crust, it may be associated with a granitic intrusion and deformation along the NAF zone. That is, the geothermal sources associated with the low velocity may be due to the occurrence of widespread shear heating, even shear melting. The presence of shear melting may indicate the presence of crustal fluid imposed by two blocks of the NAF system.  相似文献   

12.
利用2014年完成的穿过银川盆地人工源宽角反射与折射剖面的3炮长观测距资料,采用基于地震波走时反演方法的Rayinvr算法得到了研究区地壳和上地幔的速度结构.结果表明:研究区地壳厚度为42—48 km,莫霍面沿剖面展布形态呈现出东西两侧浅、中部较深的特征,莫霍面最深的区段位于贺兰山下方. P波速度沿剖面随着深度的增加呈正梯度增大,然而在深度约为90—103 km的岩石圈地幔中,识别出两组较明显的反射界面,两组界面之间并未发现P波速度随深度而显著增加,表明研究区下方存在与地球平均模型中速度随深度增加而增大不相符的速度结构,推测银川盆地下方岩石圈与软流圈之间可能存在速度过渡带.   相似文献   

13.
We computed P and S receiver functions to investigate the lithospheric structure beneath the northwest Iran and compute the Vp/Vs ratio within the crust of this seismologically active area. Our results enabled us to map the lateral variations of the Moho as well as those of the lithosphere–asthenosphere boundary (LAB) beneath this region. We selected data from teleseismic events (Mb > 5.5, epicentral distance between 30° and 95° for P receiver functions and Mb > 5.7, epicentral distance between 60° and 85° for S receiver functions) recorded from 1995 to 2008 at 8 three-component short-period stations of Tabriz Telemetry Seismic Network. Our results obtained from P receiver functions indicate clear conversions at the Moho boundary. The Moho depth was firstly estimated from the delay time of the Moho converted phase relative to the direct P wave. Then we used the H-Vp/Vs stacking algorithm of Zhu and Kanamori to estimate the crustal thickness and Vp/Vs ratio underneath the stations with clear Moho multiples. We found an average Moho depth of 48 km, which varies between 38.5 and 53 km. The Moho boundary showed a significant deepening towards east and north. This may reveal a crustal thickening towards northeast possibly due to the collision between the Central Iran and South Caspian plates. The obtained average Vp/Vs ratio was estimated to be 1.76, which varies between 1.73 and 1.82. The crustal structure was also determined by modeling of P receiver functions. We obtained a three-layered model for the crust beneath this area. The thickness of the layers is estimated to be 6–11, 18–35, and 38–53 km, respectively. The average of the shear wave velocity was calculated to be 3.4 km/s in the crust and reaches 4.3 km/s below the Moho discontinuity. The crustal thickness values obtained from P receiver functions are in good agreement with those derived by S receiver functions. In addition, clear conversions with negative polarity were observed at ~8.7 s in S receiver functions, which could be related to the conversion at the LAB. This may show a relatively thin continental lithosphere of about 85 km implying that the lithosphere was influenced by various geodynamical reworking processes in the past.  相似文献   

14.
Studies on the crustal and upper-mantle structure in Antarctica have been one of the major contributions to Antarctic research since the International Geophysical Year of 1957–1958. Many refraction surveys with small charge size have been conducted in Antarctica, but long-range experiments were also made in 5 regions on the margin of the Antarctic continent.In 1979–1981, the scientific program of the Japanese Antarctic Research Expedition was focused on the earth sciences, and in particular, an explosion seismic experiment along a long survey line was the major item during these years. An experiment along a 300 km-long line with three shots and 27 observation stations was successfully made in the northern Mizuho Plateau, East Antarctica.From the analysis of travel times and the amplitude study of synthetic seismograms, the crustal structure of the northern Mizuho Plateau was determined. The depths of the Conrad and the Moho discontinuties were determined as 31 km and 42 km, respectively. The P-wave velocity and depth relation was determined as 6.0 km/s on the surface of the bedrock, 6.3 km/s at a depth of 2 km, 6.8 km/s at the Conrad and 7.9 km/s at the Moho. The velocity in the crust increases gradually. The crustal structure obtained is representative of East Antarctica.  相似文献   

15.
The Dalrymple Trough marks part of the transform plate boundary between India and Arabia in the northern Arabian Sea. Oblique extension is presently active across this portion of the boundary at a rate of a few millimetres per year, and seismic reflection profiles across the trough confirm that it is an extensional structure. We present new swath bathymetric and wide-angle seismic data from the trough. The bathymetric data show that the trough is bounded by a single, steep, 3-km-high scarp to the southeast and a series of smaller, en-echelon scarps to the northwest. Wide-angle seismic data show that a typical oceanic crustal velocity structure is present to the northwest, with a crustal thickness of ~ 6 km. There is an abrupt change in crustal thickness and velocity structure at the northwestern edge of the trough, and the trough itself is underlain by 12-km-thick crust interpreted as thinned continental crust. Therefore we infer that Dalrymple Trough is an unusual obliquely extending plate boundary at which continental crust and oceanic crust are juxtaposed. The extensional deformation is focused on a single major fault in the continental lithosphere, but distributed over a region ~ 60 km wide in the oceanic lithosphere.  相似文献   

16.
体波波形反演对青藏高原上地幔速度结构的研究   总被引：10，自引：5，他引：5       下载免费PDF全文
采用波形反演方法对青藏高原地区震中距8°-38°范围内的宽频带炸波波形进行拟合,研究该地区上地幔平均速度结构以及上地幔纵、横波速度的横向不均匀性结果表明青藏高原地区的平均地壳厚度约为68km,上地幔盖层平均厚度约为30－40km,速度约为8.10km／s雅鲁藏布江附近地壳厚度最大,约80km,相应的上地幔Pn速度为8．15km／s左右,青藏高原中部地区的地壳平均厚度约68-70km．位于拉萨地块北部的羌塘地块S波速度相对较低,其地壳和上地慢的平均S波速度分别比拉萨地块低1％和2％以上34°N以北,90°E附近的区域存在明显的上地幔P波低速异常区,P波的平均速度小于7．8km／s据此结果及前人工作,推断印度板块的俯冲可能以雅鲁藏布江缝合带附近为界,青藏高原巨大的地壳厚度是由于欧亚板块碰撞造成地壳缩短与增厚引起.  相似文献   

17.
Seismic refraction and near earthquake data of the U.S. Geological Survey for central California have been compiled into record sections along profiles and interpreted in terms of crustal structure. The profiles are located northeast of the San Andreas fault of central California and run parallel to the general structures. For the explosion seismic line through the centre of the Diablo Range, an uppermost layer (Franciscan formation) with P velocities of 3.6–5.0 km s?1 decreases in thickness towards the northwest. The lower boundaries of layers with constant velocities of 5.75 and 6.8 km s?1 are found at almost constant depths of 12 and 21 km, respectively. Between 21 and 26 km depth a well-defined low-velocity zone appears whose velocity is estimated as ～ 5.3 km s?1 with the aid of a hedgehog inversion and the calculation of amplitudes. This zone is underlain by a layer 3–5 km thick with a velocity of 7.6 km s?1. The upper-mantle velocity beneath the Moho at 29–30 km depth is 8.2 km s?1. The near earthquake profiles, located ～ 20 km southwest and parallel to the explosion seismic line, follow more or less the Hayward and Calaveras fault systems. The velocity-depth distribution derived for the earthquake data is very similar to that found beneath the Diablo Range. However, the low-velocity zone at 21–26 km depth does not seem to exist everywhere along the line. The Moho is not disturbed beneath the Calaveras, Hayward and Silver Creek faults; it rises slightly from the Diablo Range towards the southwest.  相似文献   

18.
In view of an anomalous crust–mantle structure beneath the 2001 Bhuj earthquake region, double-difference relocations of 1402 aftershocks of the 2001 Bhuj earthquake were determined, using an improved 1D velocity model constructed from 3D velocity tomograms based on data from 10 to 58 three-component seismograph stations. This clearly delineated four major tectonic features: (i) south-dipping north Wagad fault (NWF), (ii and iii) south-dipping south Wagad faults 1 and 2 (SWF1, SWF2), and (iv) a northeast dipping transverse fault (ITF), which is a new find. The relocated aftershocks correlate satisfactorily with the geologically mapped and inferred faults in the epicentral region. The relocated focal depths delineate a marked variation to the tune of 12 km in the brittle–ductile transition depths beneath the central aftershock zone that could be attributed to a lateral variation in crustal composition (more or less mafic) or in the level of fracturing across the fault zone. A fault intersection between the NWF and ITF has been clearly mapped in the 10–20 km depth range beneath the central aftershock zone. It is inferred that large intraplate stresses associated with the fault intersection, deepening of the brittle–ductile transition to a depth of 34 km due to the presence of mafic/ultramafic material in the crust–mantle transition zone, and the presence of aqueous fluids (released during the metamorphic process of eclogitisation of lower crustal olivine-rich rocks) and volatile CO2 at the hypocentral depths, might have resulted in generating the 2001 Bhuj earthquake sequence covering the entire lower crust.  相似文献   

19.
Inversion of local earthquake travel times and joint inversion of receiver functions and Rayleigh wave group velocity measurements were used to derive a simple model for the velocity crustal structure beneath the southern edge of the Central Alborz (Iran), including the seismically active area around the megacity of Tehran. The P and S travel times from 115 well-located earthquakes recorded by a dense local seismic network, operated from June to November 2006, were inverted to determine a 1D velocity model of the upper crust. The limited range of earthquake depths (between 2 km and 26 km) prevents us determining any velocity interfaces deeper than 25 km. The velocity of the lower crust and the depth of the Moho were found by joint inversion of receiver functions and Rayleigh wave group velocity data. The resulting P-wave velocity model comprises an upper crust with 3 km and 4 km thick sedimentary layers with P wave velocities (Vp) of ～5.4 and ～5.8 km s?1, respectively, above 9 km and 8 km thick layers of upper crystalline crust (Vp ～6.1 and ～6.25 km s?1 respectively). The lower crystalline crust is ～34 km thick (Vp ～ 6.40 km s?1). The total crustal thickness beneath this part of the Central Alborz is 58 ± 2 km.  相似文献   

20.
用远震接收函数研究滇西地区的深部结构   总被引：5，自引：1，他引：5       下载免费PDF全文
滇西地区地处欧亚板块碰撞或俯冲的边界地带，曾受到多期构造运动的影响，其地质环境和构造背景十分复杂，是我国地震活动比较活跃的地区之一. 本文选用国家、地方和流动数字台网的16个台站的远震记录. 其中PASSCAL甚宽频带流动地震台站4个，提取有效接收函数近2 000条. 两条测线的直线距离分别为650 km和450 km， 横切了滇西地区的一些主要构造单元. 研究表明，怒江断裂可能是一条具有俯冲性质的缝合线. 川滇菱形块体东西两侧的分界线¾红河断裂和小江断裂可能是直立的缝合线或碰撞带. 攀西构造带仍具有大陆裂谷的特征，即地表凹陷、上地幔隆起. 滇西地区的构造格局具有一定的规律性，造山带与缝合线相间分布. 滇西地区由北向南地壳厚度渐次减薄，S波速度整体偏低.   相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号