首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 765 毫秒
1.
Cathodoluminescence (CL) analyses were carried out on maskelynite and lingunite in L6 chondrites of Tenham and Yamato-790729. Under CL microscopy, bright blue emission was observed in Na-lingunite in the shock veins. Dull blue-emitting maskelynite is adjacent to the shock veins, and aqua blue luminescent plagioclase lies farther away. CL spectroscopy of the Na-lingunite showed emission bands centered at ~330, 360–380, and ~590 nm. CL spectra of maskelynite consisted of emission bands at ~330 and ~380 nm. Only an emission band at 420 nm was recognized in crystalline plagioclase. Deconvolution of CL spectra from maskelynite successfully separated the UV–blue emission bands into Gaussian components at 3.88, 3.26, and 2.95 eV. For comparison, we prepared K-lingunite and experimentally shock-recovered feldspars at the known shock pressures of 11.1–41.2 GPa to measure CL spectra. Synthetic K-lingunite has similar UV–blue and characteristic yellow bands at ~550, ~660, ~720, ~750, and ~770 nm. The UV–blue emissions of shock-recovered feldspars and the diaplectic feldspar glasses show a good correlation between intensity and shock pressure after deconvolution. They may be assigned to pressure-induced defects in Si and Al octahedra and tetrahedra. The components at 3.88 and 3.26 eV were detectable in the lingunite, both of which may be caused by the defects in Si and Al octahedra, the same as maskelynite. CL of maskelynite and lingunite may be applicable to estimate shock pressure for feldspar-bearing meteorites, impactites, and samples returned by spacecraft mission, although we need to develop more as a reliable shock barometer.  相似文献   

2.
Abstract— We studied the infrared reflectance (IR), Raman, and cathodoluminescence (CL) spectroscopic signatures and scanning electron microscope‐cathodoluminescence (SEM‐CL) images of three different types of impact glasses: Aouelloul impact glass, a Muong Nong‐type tektite, and Libyan desert glass. Both backscattered electron (BSE) and CL images of the Muong Nong‐type tektite are featureless; the BSE image of the Libyan desert glass shows only weak brightness contrasts. For the Aouelloul glass, both BSE and CL images show distinct brightness contrast, and the CL images for the Libyan desert glass show spectacular flow textures that are not visible in any other microscopic method. Compositional data show that the SiO2 composition is relatively higher and the Al2O3 content is lower in the CL‐bright areas than in the CL‐dark regions. The different appearance of the three glass types in the CL images indicates different peak temperatures during glass formation: the tektite was subjected to the highest temperature, and the Aouelloul impact glass experienced a relatively low formation temperature, while the Libyan desert glass preserves a flow texture that is only visible in the CL images, indicating a medium temperature. All IR reflectance spectra show a major band at around 1040 to 1110 cm?1 (antisymmetric stretching of SiO4 tetrahedra), with minor peaks between 745 and 769 cm?1 (Si‐O‐Si angle deformation). Broad bands at 491 and 821 cm?1 in the Raman spectra in all samples are most likely related to diaplectic glass remnants, indicating early shock amorphization followed by thermal amorphization. The combination of these spectroscopic methods allows us to deduce information about the peak formation temperature of the glass, and the CL images, in particular, show glass flow textures that are not preserved in other more conventional petrographic images.  相似文献   

3.
Highly forsteritic olivine (Fo: 99.2–99.7) in the Kaba meteorite emits bright cathodoluminescence (CL). CL spectra of red luminescent forsterite grains have two broad emission bands at approximately 630 nm (impurity center of divalent Mn ions) in the red region and above 700 nm (trivalent Cr ions) in the red–IR region. The cores of the grains show CL blue luminescence giving a characteristic broad band emission at 400 nm, also associated with minor red emissions related to Mn and Cr ions. CL color variation of Kaba forsterite is attributed to structural defects. Electron probe microanalyzer (EPMA) analysis shows concentrations of Ca, Al, and Ti in the center of the forsterite grain. The migration of diffusible ions of Mn, Cr, and Fe to the rim of the Kaba meteoritic forsterite was controlled by the hydrothermal alteration at relatively low temperature (estimated at about 250 °C), while Ca and Al ions might still lie in the core. A very unusual phase of FeO (wüstite) was also observed, which may be a terrestrial alteration product of FeNi‐metal.  相似文献   

4.
Abstract— Twenty‐three moldavites from a new locality, the Cheb Basin in Western Bohemia, were analyzed by instrumental neutron activation analysis for 45 major and trace elements. Detailed comparison of the Cheb Basin moldavites with moldavites from other substrewn fields in both major and trace element composition shows that the Cheb Basin is a separate substrewn field. The geochemical data obtained are discussed with respect to the source materials and processes leading to formation of moldavites. The data show that three groups of Cheb Basin moldavites exist. Ten samples of group 1 are characterized by the lowest content of Al, Fe, Na, and other elements representing phyllosilicate minerals, and by high Ca + Mg contents related probably to carbonates. They resemble the “poisonous green” moldavites, a subgroup of the Southern Bohemian moldavites. Seven samples of group 2 and 6 samples of group 3 are similar to typical moldavites of the Southern Bohemian substrewn field. These two groups differ from each other mainly in Al contents; with higher contents of Al and the elements associated with phyllosilicate minerals (namely Ba and Sr), group 3 also resembles the Moravian moldavites. Significant positive correlations between K, Ca, Mg, and Mn found in group 2 of the Cheb Basin moldavites and the enrichment in these elements observed generally in all moldavites, as well as other facts, e.g., high K/Na and K/Rb ratios and the reduced conditions during formation of moldavites, have been attributed to possible contribution to the moldavite source materials of the ash produced by burning of vegetation and soil organic matter present at the pre‐impact area.  相似文献   

5.
Moldavites represent tektites derived from the Ries impact structure (~24 km diameter, ~15 Myr old) in southern Germany. Two new localities with parautochthonous moldavites in southwestern Poland were found. In these localities, fluvial sediments of the so‐called Gozdnicka formation host the moldavites. Characteristic tektite features, especially bubbles and inclusions of lechatelierite, are reported. The moldavites' size distribution and their abraded shapes indicate that they were redeposited from the nearby Lusatia substrewn field.  相似文献   

6.
Lithium abundances and isotope compositions are presented for a suite of sediments from the surroundings of the Ries Impact structure, paralleled by new Li data for central European tektites (moldavites) from several substrewn fields (South Bohemia, Moravia, Cheb Basin, Lusatia), including a specimen from the newly discovered substrewn field in Poland. The data set was supplemented by three clay fractions isolated from sedimentary samples. Moldavites measured in this study show a very narrow range in δ7Li values (?0.6 to 0.3‰ relative to L‐SVEC) and Li contents (23.9–48.1 ppm). This contrasts with sediments from the Ries area which show remarkable range in Li isotope compositions (from ?6.9 to 13.4‰) and Li contents (0.6–256 ppm). The OSM sediments which, based on chemical similarity, formed the major part of moldavites, show a range in δ7Li values from ?2.0 to 7.9‰ and Li contents from 5.8 to 78.9 ppm. Therefore, the formation of moldavites was apparently accompanied by large‐scale mixing, paralleled by chemical and isotope homogenization of their parent matter. The proposed Li mixing model indicates that sands, clayey sediments, and low volumes of carbonates are the major components for tektite formation whereas residual paleokarst sediments could have been a minor but important component for a subset of moldavites. Striking homogenization of Li in tektites, combined with limited Li loss during impacts, may suggest that moderately volatile elements are not scavenged and isotopically fractionated during large‐scale collisions, which is consistent with recent models. In general, whether homogenization of bodies with distinct Li isotope systematics takes place, or collision of bodies with similar Li systematics operates cannot be resolved at present stage but Li isotope homogeneity of solar system planets and asteroidal bodies tentatively implies the latter.  相似文献   

7.
Abstract– Tektites, natural silica‐rich glasses produced during impact events, commonly contain bubbles. The paper reviews published data on pressure and composition of a gas phase contained in the tektite bubbles and data on other volatile compounds which can be released from tektites by either high‐temperature melting or by crushing or milling under vacuum. Gas extraction from tektites using high‐temperature melting generally produced higher gas yield and different gas composition than the low‐temperature extraction using crushing or milling under vacuum. The high‐temperature extraction obviously releases volatiles not only from the bubbles, but also volatile compounds contained directly in the glass. Moreover, the gas composition can be modified by reactions between the released gases and the glass melt. Published data indicate that besides CO2 and/or CO in the bubbles, another carbon reservoir is present directly in the tektite glass. To clarify the problem of carbon content and carbon isotopic composition of the tektite glass, three samples from the Central European tektite strewn field—moldavites—were analyzed. The samples contained only 35–41 ppm C with δ13C values in the range from ?28.5 to ?29.9‰ VPDB. This indicates that terrestrial organic matter was a dominant carbon source during moldavite formation.  相似文献   

8.
We examined 16 white opaque inclusions exposed on two polished slices of a Muong Nong‐type Australasian tektite from Muong Phin, Laos. The inclusions usually consist of a core, surrounded by a froth layer, and a quartz neoblast layer. The cores are composed primarily of a mixture of silica glass, coesite, and quartz in varying proportions. A thin (up to ~4 μm) layer of SiO2‐poor glass enriched in FeO, MgO, CaO, Al2O3, and TiO2 is observed as a bright halo in backscattered electron images around the quartz neoblasts and in places contains μm‐sized crystals, which may be Fe,Mg‐rich spinel. The distribution and textural relationships between the coesite‐bearing inclusions and the tektite matrix point to an in situ formation of the coesite due to an impact, rather than to infall, from a nearby impact, into tektite melt produced by the aerial burst of a bolide. The quartz neoblasts probably formed by crystallization of silica melt squeezed out of the inclusion core during the development of the froth layer. The bright halo may be the result of silica diffusing from the adjacent tektite melt into the growing quartz neoblasts. We propose that the survival of coesite was possible due to the froth layer that acted as a heat sink during bubble expansion and then as a thermal insulator.  相似文献   

9.
Abstract— Five indochinites from Hainan Island and the Leizhou Peninsula, China were analyzed for noble gas abundances and isotopic ratios. These splash‐form tektites show vesiculation ranging from 0.4 vol% to 8 vol%, as determined by digital image analysis (software SXM®) on thin section photographs. To study the distribution of noble gases in vesicles and in glass, the gases were extracted by heating and by crushing, respectively, on 2 aliquots of the same sample. The results show that 5 to 53% of the total measured 20Ne resides in vesicles. The calculated concentration of neon dissolved in the glass is higher (0.7‐1 times 10?7 cm3STP/g) than that expected from solubility equilibrium (1 times 10?8 cm3STP/g), assuming solubility data from MORB glasses. The neon concentration of splash‐form tektites, those analyzed in this work and those from other strewn‐fields worldwide, is correlated with the SiO2 content of glass and with the nonbridging oxygen per tetrahedral cation in the melt (hereafter NBO/T ratio), the latter being an index of the free‐volume in the silica network where neon could be dissolved. These correlations suggest that the glass structure of tektite has a larger free‐volume available for dissolving noble gases than MORB glasses.  相似文献   

10.
Abstract— We studied unshocked and experimentally (at 12, 25, and 28 GPa, with 25, 100, 450, and 750°C pre‐shock temperatures) shock‐metamorphosed Hospital Hill quartzite from South Africa using cathodoluminescence (CL) images and spectroscopy and Raman spectroscopy to document systematic pressure or temperature‐related effects that could be used in shock barometry. In general, CL images of all samples show CL‐bright luminescent patchy areas and bands in otherwise nonluminescent quartz, as well as CL‐dark irregular fractures. Fluid inclusions appear dominant in CL images of the 25 GPa sample shocked at 750°C and of the 28 GPa sample shocked at 450°C. Only the optical image of our 28 GPa sample shocked at 25°C exhibits distinct planar deformation features (PDFs). Cathodoluminescence spectra of unshocked and experimentally shocked samples show broad bands in the near‐ultraviolet range and the visible light range at all shock stages, indicating the presence of defect centers on, e.g., SiO4 groups. No systematic change in the appearance of the CL images was obvious, but the CL spectra do show changes between the shock stages. The Raman spectra are characteristic for quartz in the unshocked and 12 GPa samples. In the 25 and 28 GPa samples, broad bands indicate the presence of glassy SiO2, while high‐pressure polymorphs are not detected. Apparently, some of the CL and Raman spectral properties can be used in shock barometry.  相似文献   

11.
Planar deformation features (PDFs) in quartz are one of the most reliable and most widely used forms of evidence for hypervelocity impact. PDFs can be identified in scanning electron microscope cathodoluminescence (SEM‐CL) images, but not all PDFs show the same CL behavior: there are nonluminescent and red luminescent PDFs. This study aims to explain the origin of the different CL emissions in PDFs. Focused ion beam (FIB) thin foils were prepared of specific sample locations selected in composite color SEM‐CL images and were analyzed in a transmission electron microscope (TEM). The FIB preparation technique allowed a direct, often one‐to‐one correlation between the CL images and the defect structure observed in TEM. This correlation shows that composite color SEM‐CL imaging allows distinction between amorphous PDFs on one hand and healed PDFs and basal Brazil twins on the other: nonluminescent PDFs are amorphous, while healed PDFs and basal Brazil twins are red luminescent, with a dominant emission peak at 650 nm. We suggest that the red luminescence is the result of preferential beam damage along dislocations, fluid inclusions, and twin boundaries. Furthermore, a high‐pressure phase (possibly stishovite) in PDFs can be detected in color SEM‐CL images by its blue luminescence.  相似文献   

12.
Abstract— Tektites are natural glasses formed from terrestrial material that was melted and displaced by the impact of an extraterrestrial body. The surface and near-surface compositions of tektite glass results from fractionation during impact and ejection, and/or postsolidification weathering. The first goal of this study was to characterise the surface and near-surface (in the order of tens of angstroms) chemical composition of two tektites by x-ray photoelectron spectroscopy (XPS), and to estimate the importance of weathering vs. fractionation during flying. In order to separate the chemical modification due to weathering from that due to fractionation during ballistic flight, we studied two samples from the Australasian tektite strewn field. One of them was collected in a hot desert area (Nullarbor Plain, Australia) and the other, in a humid climate (Thailand). Our study reveals the presence of well-developed leached layers in both tektites. In the Australian tektite, Si is depleted in the topmost layers (a few tens of angstroms). A more complex chemical zoning is defined in the tektite from Thailand. These leached layers are comparable to those observed in weathered glasses, and therefore we conclude that weathering is responsible for the chemical composition of the surface and near-surface compositions. The second goal was to investigate the chemical environment of O, N and C in the glass. The O peak was resolved into two bridging O components (Si-O-Si and Al-O-Si) that are comparable to O environments in artificial glasses. The binding energy of the C1s electron is typical for C-C and C-H bonds in hydrocarbons; minor organic acid components are also present. Nitrogen is only observed on the surface of the Thailand tektite. The binding energy of N1s is comparable to that of ammonia, and the surface enrichment in N is interpreted as due to sorption related to interactions between glass and fluid buffered by the organic material in the soil.  相似文献   

13.
Cover     
Left image: Composite backscattered electron image of Paris‐6, one of the three sections of Paris surveyed by Yves Marrocchi et al. in their study. Right image: Composite EDX elemental map of Mg (red), Al (blue), and Ca (green) of Paris‐6 revealing the distribution of chondrules, CAIs, and matrix. For details their article on pp. 1232–1249. Image courtesy of Anton T. Kearsley.  相似文献   

14.
Cover     
Combined elemental, Mg‐Ca‐Al (red‐green‐blue), composition map for a section of Yamato‐82094. The image shows abundant chondrules, Al‐rich chondrules and CAIs. Matrix, dark red in color, is low in abundance. These features indicate that Y‐82094 is a new type of carbonaceous chondrite. Image was collected using the Cameca SX‐100 at the American Museum of Natural History, NY.  相似文献   

15.
Abstract— In previous studies, intersample variation between compositions of different tektites from one particular group were studied and, in a few cases, major element variations within single tektites. No data for intra‐sample trace element variations existed. Thus, we sectioned a Muong Nong‐type tektite fragment from Vietnam and a splash‐form tektite fragment from the Philippines into eleven and six pieces, respectively, and analyzed the individual fragments for major and trace element contents. The compositions obtained agree well with those found in previous studies, supporting argument that tektites have been derived from terrestrial upper crustal sediments. Chemical variations within the tektite fragments are present, but do not show any systematic trends, probably reflecting incomplete mixing of parent rocks. The intra‐sample heterogeneity of the Muong Nong‐type tektite is more pronounced than that in the philippinite. For the Muong Nong‐type tektite, the intra‐sample variation in the trace element contents is higher than that for the major elements, again reflecting target rock properties. For the philippinite the intra‐sample variations mostly do not exceed the limits imposed by the precision of the analytical data, confirming that the splash form tektites are indeed well homogenized.  相似文献   

16.
Abstract— Four samples from Libyan Desert glass, one sample from Muong-Nong-type tektite, labelled Guang-Dong, and one sample from Czech Moldavite were analysed using the fission-track dating method. The Moldavite was unaffected by partial thermal track annealing, whereas the ages of Libyan Desert glass and Guang-Dong tektite appear to have been thermally lowered. Fission-track ages of the latter impact glasses were corrected using the plateau method. Apparent ages of Libyan Desert glass (between 26.0 ± 1.8 Ma and 29.0 ± 1.8 Ma) and Guang-Dong tektite (0.61 ± 0.05 Ma), as well as plateau ages (weighted mean: 28.5 ± 0.8 Ma for Libyan Desert glass and 0.77 ± 0.08 Ma for Guang-Dong) resulted in close agreement with previous determinations published in the late 1970s by Storzer and Wagner (1977). The age of the Moldavite (15.2 ± 0.08 Ma) also resulted in agreement with previous fission track and K-Ar determinations.  相似文献   

17.
Cover          下载免费PDF全文
Phase map of an iddingsite vein in an olivine grain from the Nakhla meteorite made using multiple linear least squares fitting of electron energy loss spectroscopy data (green ‐ olivine, blue ‐ siderite, pink ‐ ferric oxyhydroxide, orange ‐ Fe‐Mg silicate). The detailed structure of the Fe‐Mg silicate is shown in the inset, which is a spectroscopic map of iron (red), magnesium (green) and silicon (blue) showing the nanoscale structure of opal‐A spheres in a Fe‐Mg‐rich matrix. Martin Lee et al. discuss the details in their article on pp. 1362–1377. Image prepared by Ian MacLaren.  相似文献   

18.
Abstract— During Leg 150 of the Ocean Drilling Project (ODP), two sites (903C and 904A) were cored that have sediments of the same biostratigraphic age as the upper Eocene tektite-bearing ejecta layer at Deep Sea Drilling Project (DSDP) Site 612. Core 45X from ODP Site 904A (～4 km north of Site 612) contains a 5 cm thick tektite-bearing ejecta layer, and Core 56 from Site 903C (～8 km north-northwest of Site 904) contains a 2 cm thick layer of impact ejecta without any tektite or impact glass. Shocked quartz and feldspar grains, with multiple sets of planar deformation features (PDFs), and abundant coesite-bearing grains are present at both sites. The major oxide contents, trace element compositions, and rare earth element (REE) patterns of the Site 904 tektites are similar to those of the Site 612 tektites and to North American tektites (especially bediasites). The ?Sr and ?Nd values for one composite tektite sample from Site 904 fall within the range previously obtained for the Site 612 tektites, which defines a linear trend that, if extrapolated, would intersect the values obtained for North American tektites. The water contents of eight tektite fragments from Site 904 range from 0.017 to 0.098 wt%, and, thus, are somewhat higher than is typical for tektites. The heavy mineral assemblages of the 63–125 μm size fractions from the ejecta layers at Sites 612, 903, and 904 are all similar. Therefore, we conclude that the ejecta layer at all three sites is from the same impact event and that the tektites at Sites 904 and 612 belong to the North American tektite strewn field. Clinopyroxene-bearing (cpx) spherules occur below, or in the lower part of, the main ejecta layer at all three sites. At all three sites, the cpx spherules have been partly or completely replaced with pyrite that preserved the original crystalline textures. Site 612, 903, and 904 cpx spherules are similar to those found in the Caribbean Sea, Gulf of Mexico, central equatorial Pacific, western equatorial Pacific, and eastern Indian Ocean. The cpx event appears to have preceded the North American tektite event by 10–15 ka or less. The fining-upward sequence at all three sites and concentration of the denser, unmelted impact ejecta at the top of the tektite layer at Sites 612 and 904 suggest that the tektite-bearing ejecta layers are not the result of downslope redeposition and that the unmelted ejecta landed after the glass. Geographic variations in thickness of the tektite-bearing ejecta layer, the lack of carbonate clasts in the ejecta layer, and the low CaO content of the tektite glass suggest that the ejecta (including the tektite glass) were derived from the Chesapeake Bay structure rather than from the Toms Canyon structure. A sharp decline in microfossil abundances suggests that local environmental changes caused by the impact may have had adverse effects on benthic foraminifera, radiolaria, sponges, and fish as well as the planktic foraminifera.  相似文献   

19.
Abstract— Libyan Desert Glass (LDG) is an enigmatic type of glass that occurs in western Egypt in the Libyan Desert. Fairly convincing evidence exists to show that it formed by impact, although the source crater is currently unknown. Some rare samples present dark‐colored streaks with variable amounts of Fe, and they are supposed to contain a meteoritic component. We have studied the iron local environment in an LDG sample by means of Fe K‐edge highresolution X‐ray absorption near edge structure (XANES) spectroscopy to obtain quantitative data on the Fe oxidation state and coordination number in both the Fe‐poor matrix and Fe‐rich layers. The pre‐edge peak of the high‐resolution XANES spectra of the sample studied displays small but reproducible variations between Fe‐poor matrix and Fe‐rich layers, which is indicative of significant changes in the Fe oxidation state and coordination number. Comparison with previously obtained data for a very low‐Fe sample shows that, while iron is virtually all trivalent and in tetrahedral coordination ([4]Fe3+) in the low‐Fe sample, the sample containing the Fe‐rich layers display a mixture of tetra‐coordinated trivalent iron ([4]Fe3+) and penta‐coordinated divalent iron ([5]Fe2+), with the Fe in the Fe‐rich layer being more reduced than the matrix. From these data, we conclude the following: a) the significant differences in the Fe oxidation state between LDG and tektites, together with the wide intra‐sample variations in the Fe‐oxidation state, confirm that LDG is an impact glass and not a tektite‐like glass; b) the higher Fe content, coupled with the more reduced state of the Fe, in the Fe‐rich layers suggests that some or most of the Fe in these layers may be directly derived from the meteoritic projectile and that it is not of terrestrial origin.  相似文献   

20.
  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号