首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 265 毫秒
1.
日照港30万吨油码头船舶泊稳物理模型试验研究   总被引:1,自引:0,他引:1  
王世江 《海岸工程》2006,25(4):25-30
日照港拟在岚北港区建设30万吨级原油码头,通过实验测定了船舶在风、浪、流作用下对码头结构的作用力、船舶运动量最大值、最大缆绳拉力、船舶对护舷撞击能量和撞击力,为工程结构设计和操船规程的制定提供可靠依据。  相似文献   

2.
在潮汐流作用下25万吨级油轮系缆力的模型试验研究   总被引:2,自引:0,他引:2  
通过25万吨级油轮泊系福建炼油厂码头的室内系缆力模型试验,研究不同潮汐和流速下油轮泊系时的系缆力,讨论了一些主要因素的影响和计算方法,指出首缆力、尾缆力和倒缆力是最主要的系缆力,流速是对系缆力影响最大的因素,提出了系缆方式和安全措施。  相似文献   

3.
王世明  赵飞  田卡 《海洋工程》2016,34(5):109-116
基于现有波浪能和潮流能发电装置研究现状,为达到波浪和潮流同时利用的目的,设计了一种以卧式轮机形式同时吸收水平波浪螺旋力和潮流能动力的新型浪流发电装置。通过正交试验设计得到三指标最佳叶片参数组合后,进行FLUENT流场分析,从流体角度出发,在其扭矩、推力以及轮机功率三方面对比分析,阐明了叶片参数对于轮机流场的作用趋势,并以此趋势为参考择出最佳模型。后期水槽实验有效验证了该卧式浪流轮机的浪流结合吸收的可行性。  相似文献   

4.
法向承力锚是一种新型的适用于深海工程的系泊基础,其极限抗拔力是锚在工程应用中的关键指标。尝试用两种不同的方法评估法向承力锚的极限抗拔力,其一是基于塑性上限分析理论;其二是运用非线性有限元数值方法。与已有的经验公式相比,所建立的计算模型不仅可考虑海床土性质,还能反映锚板定位(嵌入深度及角度)以及系缆力角度对锚极限抗拔力的影响。在与已有评估方法进行比较的基础上,还特别对锚板的嵌入深度、角度以及系缆力角度变化对极限抗拔力的影响规律进行了分析,对三种方法的适用性进行了评述。  相似文献   

5.
金塘水道南岸西口建有中石化镇海炼化公司算山码头区和北仑港电厂两大工程,其中镇海炼化公司共建有25万t、5万t级及其它码头5个,最东侧为25万t级原油码头,与北仑港电厂取排水口毗邻。此码头东侧距电厂取水口130m,而电厂排水口位于该码头侧后方约860m。电厂采用明渠排水方式,排水通道会在低潮位时直冲码头工作平台。1998年曾发生25万t级船舶系泊作用时断缆使船舶产生漂移的险情。研究断缆导致船舶产生漂移的原因的同时,并提出了对策措施以确保船舶安全系泊作业。  相似文献   

6.
深水绷紧式系泊系统以合成纤维材料系缆作为主体系缆,由于系缆复杂的力学特性以及绷紧式系泊方式的特点,在设计、分析和工程应用中会带来新的有待深入认识的问题。以一系泊浮体的动力响应分析为例,考察了循环载荷作用下纤维系缆的动刚度特性,比较了悬链式系泊与绷紧式系泊动力响应的特点。分析表明,绷紧式系泊具有优良的系泊性能,但同时会发生复杂的张力响应。这些认识对于绷紧式系泊系统的研发和工程应用具有重要的参考价值。  相似文献   

7.
通过物理模型试验,得到了3种船型在不同工况组合下的偏荡幅度、偏荡周期以及系泊力实测数据。试验得出了船舶在台风与波、浪、流共同作用下,单点系泊力的主要影响因素为风速、流速、波浪、船舶种类、水线上下侧投影面积比和系泊系统的刚性。选出了本文理论意义明确合理的适合单点系泊系统使用的防风系泊力表达形式,即奎因公式。采用系泊力试验数据在奎因公式的基础上导出的防风系泊系统系泊力计算公式,并给出了公式中的重要参数表达式。  相似文献   

8.
深海平台系缆形状和张力分析   总被引:1,自引:0,他引:1  
考虑海底地形的变化、系缆的拉伸形变及海流力等因素,研究了深海平台系缆形状和张力分析方法采用集中质量法,得到系缆方程组,采用牛顿法求解该非线性系缆方程组,建立系缆形状和张力的计算方法。计算了平坦海底和海底地形凹凸变化时水深1 018 m情况下的系缆形状、系泊张力和浮体平衡位置。计算结果表明,海底地形对于深海系泊系统张力影响较大,而计算系缆形状和张力、系泊浮体的运动时,需要考虑海底地形的影响。  相似文献   

9.
连宇顺  刘海笑 《海洋工程》2019,37(1):142-154
在回顾合成纤维缆绳的分类和工程应用的基础上,概述了各类纤维缆绳的优缺点和工程适用性。介绍了合成纤维系缆实验技术的国内外研究进展,并综述了合成纤维缆绳的破断强度、动刚度、蠕变、蠕变回复、蠕变破断和疲劳破坏的研究现状,在此基础上展望了今后需要继续开展的合成纤维系缆研究方向。这将为海洋系泊工程中合成纤维系缆的研究和应用提供重要参考。  相似文献   

10.
由于聚酯缆绳具备优异的力学性能,促使以其为主体系缆的绷紧式系泊系统得以广泛应用和发展。但聚酯系缆具有复杂的黏弹性和黏塑性,且由于在安装和使用过程中可能产生不同程度的损伤,使得聚酯系缆的动刚度特性发生演变,从而对系泊系统的动力响应产生直接影响。以一系泊于1 020 m水深的Spar平台为例,运用ABAQUS软件建立了由聚酯缆绳组成的系泊系统有限元模型,并利用ABAQUS子程序将损伤缆绳动刚度经验公式进行导入计算,以更好地反映系缆真实的动刚度变化。基于该有限元模型,计算了在相同水流、波浪工况下,不同损伤度、不同损伤系缆的系缆张力历程和平台的横荡、纵荡位移响应,分析了不同损伤度、不同损伤系缆对系缆张力及平台位移的影响。这些成果对把握绷紧式系泊系统在聚酯系缆有损伤情况下的非线性动力响应及其安全应用具有重要的参考价值。  相似文献   

11.
1 .IntroductionWhenatankerisberthedormooredtoanoceanplatform ,whichisusuallyinopenseas,thetankerwillsufferforcesgeneratedbywaves ,windandcurrent.Inmostofthepreviousstudies ,thein fluenceofcurrentorthecombinedwaveandcurrentwasconsideredtobethemainobject.Ins…  相似文献   

12.
重力式与碟形网箱的锚绳受力特性比较   总被引:6,自引:0,他引:6  
针对常见的重力式、碟形和拟碟形网箱在不同下潜深度状态下的锚绳受力特性进行了试验研究.试验共设模型4组,分别在纯流、纯波以及波流联合条件下进行.测力通过系缚于锚绳底端的4个拉力传感器获得.试验结果表明水流作用力的大小在很大程度上受网箱结构形式的影响,而在波浪条件下其影响相对较小.重力式网箱的配重形式及下潜形式对网箱的受力具有重要影响.另外,网箱在波流组合条件下的受力并不是纯流及纯波单独作用下的简单叠加.最后,在综合比较网箱价格和性能的前提下,对网箱结构形式的选择进行了一些讨论,并提出若干建议.  相似文献   

13.
以Spar型浮式风机为研究对象,研究涡激力对于浮式风机系统运动的影响。对多体动力学软件FAST进行二次开发,加入涡激力的计算接口,实现了在平台涡激、波激、空气动力载荷及系泊联合作用下的Spar浮式风机系统的运动响应的计算。计算了在风、浪、流联合作用下,频率锁定现象发生时,Spar基础的运动响应,分析了风浪下Spar风机运动响应的涡激运动特性,并研究了不同的入流角度的影响。结果表明:考虑涡激力后,Spar基础的横荡运动明显增大;风浪流同向时,风浪的存在会抑制流载荷引起的横荡在涡泄频率的运动;在流与风浪垂直时,会激发Spar基础的更大的纵荡运动响应。  相似文献   

14.
《Coastal Engineering》2006,53(10):799-815
Using the volume of fluid (VOF) method, a numerical model is developed to estimate the nonlinear dynamics of a pontoon type moored submerged breakwater under wave action and the forces acting on the mooring lines, for both the vertical and inclined mooring alignments. The model is developed for a two-dimensional wave field in a vertical plane. The finite displacements of the breakwater such as sway, heave and roll in a very small time step are considered and the numerical grid cells intersected by the breakwater surfaces for changing its position due to wave action are treated using the concept of porous body model. Also, two-dimensional experimental studies are carried out to investigate the performance of the proposed model. The comparison of the computed and measured results reveals that the developed numerical model can reproduce well the dynamics of the floating body and the mooring line forces.  相似文献   

15.
码头系泊船舶模型试验   总被引:14,自引:0,他引:14  
通过对一艘50kDWG码头系泊船舶的模型试验,得出了系泊缆绳张力随外载荷变化的一般规律,对码头系泊有一定的参考价值。  相似文献   

16.
In this paper, the impact analysis of air gap concerning the parameters of mooring system for the semi-submersible platform is conducted. It is challenging to simulate the wave, current and wind loads of a platform based on a model test simultaneously. Furthermore, the dynamic equivalence between the truncated and full-depth mooring system is still a tuff work. However, the wind and current loads can be tested accurately in wind tunnel model. Furthermore, the wave can be simulated accurately in wave tank test. The full-scale mooring system and the all environment loads can be simulated accurately by using the numerical model based on the model tests simultaneously. In this paper, the air gap response of a floating platform is calculated based on the results of tunnel test and wave tank. Meanwhile, full-scale mooring system, the wind, wave and current load can be considered simultaneously. In addition, a numerical model of the platform is tuned and validated by ANSYS AQWA according to the model test results. With the support of the tuned numerical model, seventeen simulation cases about the presented platform are considered to study the wave, wind, and current loads simultaneously. Then, the impact analysis studies of air gap motion regarding the length, elasticity, and type of the mooring line are performed in the time domain under the beam wave, head wave, and oblique wave conditions.  相似文献   

17.
通过建立波浪作用下锚碇沉管管段运动的时域数值计算模型,对锚碇沉管的运动响应及锚碇缆受力特性进行了研究。应用集中质量法求解锚碇缆力,应用四阶Runge-Kutta法求解管段时域运动方程,计算了在不同沉深、不同周期、不同波高和不同波向条件下沉管管段的运动幅值和锚碇缆力。数值计算的结果表明:锚碇沉管的锚碇缆对沉管管段的运动起到一定的约束作用,在沉放深度较浅、波浪周期较大时,锚碇缆对沉管管段运动幅度的制约更为明显。通过五种布缆方式的计算与分析,探讨了布缆方式对沉管管段运动响应及锚碇缆受力的影响,并给出了较为合理的布缆方案。  相似文献   

18.
概念性地设计了一种新型半潜式海上风力机基础,确定了结构的型式和尺寸,对风浪联合作用下不同工况的风力机基础稳性进行了校核.考虑黏性阻尼和二阶波浪力的作用,计算分析了风力机基础的水动力系数、幅频运动以及动力响应特性.结果表明,经过改进的新型风力机基础具有良好的稳性和水动力性能,特别是在垂荡性能上有大幅的提升.波浪入射角度对垂荡的影响不大,但对其他自由度RAOs影响较大.垂荡、横摇和纵摇RAOs均存在一个主峰值和次峰值,但峰值周期均远离波能集中区.此外还发现,不同工况下风浪入射角对风机系统的动力响应和系泊力均有较大影响,相对于工作工况,极端工况下所受风荷载较小,但是系泊力更大.  相似文献   

19.
Hybrid model testing technique is widely used in verification of a deepwater floating structure and its mooring system,but the design of the truncated mooring systems which can reproduce both static and dynamic response same as the full-depth mooring system is still a big challenge,especially for the mooting systems with large truncation.A Cell-Tress Spar operated in 1500 m water depth is verified in a wave basin with 4 m water depth.A large truncation factor arises even though a small model scale 1:100 is adopted.Computer program modules for analyzing the static and frequency domain dynamic response of mooting line are combined with multi-objective genetic algorithm NSGA-II to optimize the truncared mooting system.Considering the asymmetry of layout of mooring hnes,two different truncated mooring systems are respectively designed for both directions in which the restoring forces of the.mooting system are quite,different.Not only the static characteristics of the mooting systems are calibrated,but also the dynamic responses of the single truncated mooting line are evaluated through time domain numerical simulation and model tests.The model test results of 100-year storm in the GOM are reconstructed and extrapolated to a full depth.It is found that the experimental and numerical resuits of Spar wave frequency motion agree well,and the dynamic responses of the full-depth mooring lines are better reproduced,but the low frequency surge motion is overestimated due to the smaller mooring-induced damping.It is a feasible method adopting different truncated mooring systems for different directions in which the restoring force characteristics are quite different and cannot be simulated by one truncated mooring system.Hybrid verification of a deepwater platform in wave basin with shallow water depth is still feasible if the truncated mooring systems are properly designed,and numerical extrapolation is necessary.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号