共查询到20条相似文献，搜索用时 62 毫秒
1.
Xavier Le Pichon Toshimishi Iiyama Jacques Boulgue Jacques Charvet Michel Faure Kenichi Kano Siegfried Lallemant Hakuyu Okada Claude Rangin Asahiko Taira Tetsuro Urabe Seiya Uyeda 《Earth and Planetary Science Letters》1987,83(1-4)
Eight submersible dives between 3000 and 4200 m water depth were made off southern Japan in the eastern Nankai subduction zone. Benthic communities associated with chemosynthetic processes were discovered along the 800 m wide active tectonic zone, at the toe of the accretionary prism. A benthic community was also discovered along a zone of active compression, at the foot of Zenisu Ridge, 30 km south of Nankai Trough. Temperature measurements within the sediments below the benthic communities confirm that upward motion of interstitial water occurs there. Studies of water samples indicate advection of methane and light hydrocarbons. Specimens of the benthic community have been shown to have included in their shells carbonate resulting from methane consumption. Thus the benthic communities are related to overpressure-driven fluid advection along tectonic zones with active surface deformation. A 300 m high active scarp at the toe of the accretionary prism is related to relative motion in a 280° direction which is close to the 305° average direction of subduction in this area. The dives establish further that compressive deformation is presently occurring at the foot of Zenisu Ridge. The previous interpretation of the Zenisu Ridge as a zone of recent north-south intraplate shortening, 40 km south of the Nankai Trench, is confirmed. We conclude that tectonic evolution might well lead to future detachment of the Zenisu Ridge and overthrusting of this large piece of oceanic crust over the continental margin. Such a process might be an efficient one to emplace ophiolites over continents. 相似文献
2.
Abstract The Nankai Trough, off southwest Japan, is one of the best sites for the study of geomorphic characteristics of a clastic accretionary prism. A recent multibeam survey over the central and eastern parts of the Nankai accretionary prism has revealed a large variation of the topography along the trough axis. Analysis of the bathymetric data suggests the existence of prism deformational features of different scales, such as depressions, embayment structures and cusps. These structures are the results of slope instability caused by basement relief of subducted oceanic plate. Unstable slopes recover by new accretion and development of a low angle thrust. Small-scale deformation due to the subduction of a small isolated seamount is then adjusted to the regional trend. By contrast, a 30 km indentation of the wedge observed in the eastern part of the Nankai Trough, the Tenryu Cusp, has seemed to retain its geometry. The subducted Philippine Sea plate has deformed greatly near the eastern end of the Nankai Trough, because of the collision between the Izu-Ogasawara (Bonin) arc and central Japan. Therefore, the indentation may be the result of the continuous subduction of a basement high, such as the Zenisu Ridge, which has been formed under north-south compression due to the arc-arc collision. 相似文献
3.
X. Le Pichon T. Iiyama H. Chamley J. Charvet M. Faure H. Fujimoto T. Furuta Y. Ida H. Kagami S. Lallemant J. Leggett A. Murata H. Okada C. Rangin V. Renard A. Taira H. Tokuyama 《Earth and Planetary Science Letters》1987,83(1-4)
Seabeam mapping and detailed geophysical surveying have been conducted over the Nankai Trough where the fossil Shikoku Ridge is subducted below southwest Japan. The geometry of the oceanic lithosphere bending under the margin as well as the three-dimensional structure of the accretionary prism have thus been determined in detail. Three 350° trending, probably transform faults have been identified in the area of the survey. They do not extend further south and appear to be limited to the last phase of spreading within the Shikoku Basin, probably between 15 and 12 Ma; this last phase of spreading would then have been accompanied by a sharp change in spreading direction from east-west to N 350°. The two eastern transform faults limit a zone of reduced Nankai trench fill of turbidites opposite to the Tosa Bae Embayment. This observation suggests that the Tosa Bae Embayment actually results from this reduced supply of trench fill to the imbricate thrusting process. The accretionary prism can be divided into three different tectonic provinces separated by continuous mappable thrusts, the Lower and Upper Main Thrusts. Surface shortening is limited to the lower accretionary prism south of the Upper Main Thrust (UMT) whereas uplift with possible extension characterizes the prism above the UMT. Deformation, due to the relative plate motion, mostly affects the lower accretionary prism south of the UMT. 相似文献
4.
Abstract The deformation style of the Torlesse Terrane along the southern Kaikoura coast, South Island, New Zealand, records shallow level deformation processes within an accretionary prism during the Early Cretaceous. The beds exhibit complicated structural features resulting from multistage deformations in a lithological unit, that were intimately related with the dewatering and lithification of terrigenous sediments. The earliest phase of deformation throughout the transect studied was the development of pinch-and-swell structures and boudinage fabrics due to layer-parallel extension while the beds were poorly consolidated. This was followed locally by mesoscopic tight to close recumbent folding. The beds are cut locally by two phases of mudstone intrusions. The earlier phase was initiated by 'in situ' fluidization of mudstone layers, whereas the later phase represented intrusion of siliceous claystone probably derived from an overpressured decollement. Minor faults at high-angles to bedding by layer-normal shortening then disrupted the beds throughout the transect. The deformation was followed by formation of meso- and macroscopic scale open to gentle folds by layer-parallel shortening. Kilometer-scale differential stratal rotations were produced during the final main tectonic phase that occurred in association with post-accretion Neogene regional disturbance. 相似文献
5.
Strength and deformation behavior of the Shimanto accretionary complex across the Nobeoka thrust 
下载免费PDF全文
下载免费PDF全文 A rapid reduction in sediment porosity from 60 to 70 % at seafloor to less than 10 % at several kilometers depth can play an important role in deformation and seismicity in the shallow portion of subduction zones. We conducted deformation experiments on rocks from an ancient accretionary complex, the Shimanto Belt, across the Nobeoka Thrust to understand the deformation behaviors of rocks along plate boundary faults at seismogenic depth. Our experimental results for phyllites in the hanging wall and shale‐tuff mélanges in the footwall of the Nobeoka Thrust indicate that the Shimanto Belt rocks fail brittlely accompanied by a stress drop at effective pressures < 80 MPa, whereas they exhibit strain hardening at higher effective pressures. The transition from brittle to ductile behavior in the shale–tuff mélanges lies on the same trend in effective stress–porosity space as that for clay‐rich and tuffaceous sediments subducting into the modern Nankai subduction zone. Both the absolute yield strength and the effective pressure at the brittle–ductile transition for the phyllosilicate‐rich materials are much lower than for sandstones. These results suggest that as the clay‐rich or tuffaceous sediments subduct and their porosities are reduced, their deformation behavior gradually transitions from ductile to brittle and their yield strength increases. Our results also suggest that samples of the ancient Shimanto accretionary prism can serve as an analog for underthrust rocks at seismogenic depth in the modern Nankai Trough. 相似文献
6.
Abstract The Nankai accretionary prism, off southwest Japan represents one of the best developed clastic prisms in the world. A combination of swath mapping including Sea Beam and 'IZANAGI' sidescan sonar and closely spaced seismic reflection data was used to investigate the relationship between the progressive landward change in surface morphology and the internal structural evolution of the prism. The prism surface is divided into three zones sub-parallel to the trough axis on the basis of the IZANAGI backscattering image. The frontal part of the prism is characterized by several continuous lineaments that are approximately perpendicular to the plate convergence direction. These lineaments correspond to anticlinal ridges caused by active imbricate thrusting. Landward, these anticlinal ridges become progressively masked by fine-grained hemipelagic slope sediments that are constantly supplied to the entire prism slope. However, these overlying sediments show little deformation. This implies a change in deformation style from frontal thrusting with fault-bend folds to internal refolding of thrust sheets. In the middle to upper prism slope, the IZANAGI image shows numerous landslide features and large fault scarps, suggesting that exposed sediments are lithified enough to fail in brittle mode compared with the wet sediment deformation at the prism toe. Prism evolution is strongly affected by the decollement depth which may be indirectly controlled by oceanic basement relief; a topographic embayment coincides with a regional minimum of sediment offscraping where a basement high has been subducted. The small tapered prism observed in the embayment may be due to lateral supply of overpressured pore fluids from the adjacent prism. Strain caused by the differential rate of prism growth across the basement relief forms faults trending at high angles to the trough axis. 相似文献
7.
Yusuf Surachman Djajadihardja Asahiko Taira Hidekazu Tokuyama Kan Aoike Christian Reichert Martin Block Hans U. Schluter Sonke Neben 《Island Arc》2004,13(1):1-17
Abstract Seismic reflections across the accretionary prism of the North Sulawesi provide excellent images of the various structural domains landward of the frontal thrust. The structural domain in the accretionary prism area of the North Sulawesi Trench can be divided into four zones: (i) trench area; (ii) Zone A; (iii) Zone B; and (iv) Zone C. Zone A is an active imbrication zone where a decollement is well imaged. Zone B is dominated by out‐of‐sequence thrusts and small slope basins. Zone C is structurally high in the forearc basin, overlain by a thick sedimentary sequence. The subducted and accreted sedimentary packages are separated by the decollement. Topography of the oceanic basement is rough, both in the basin and beneath the wedge. The accretionary prism along the North Sulawesi Trench grew because of the collision between eastern Sulawesi and the Bangai–Sula microcontinent along the Sorong Fault in the middle Miocene. This collision produced a large rotation of the north arm of Sulawesi Island. Rotation and northward movement of the north arm of Sulawesi may have resulted in southward subduction and development of the accretionary wedge along North Sulawesi. Lateral variations are wider in the western areas relative to the eastern areas. This is due to greater convergence rates in the western area: 5 km/My for the west and 1.5 km/My for the east. An accretionary prism model indicates that the initiation of growth of the accretionary prism in the North Sulawesi Trench occurred approximately 5 Ma. A comparison between the North Sulawesi accretionary prism and the Nankai accretionary prism of Japan reveals similar internal structures, suggesting similar mechanical processes and structural evolution. 相似文献
8.
Kazuya Shiraishi Masako Robb Karl Hosgood Yasuhiro Yamada 《Geophysical Prospecting》2019,67(2):317-330
To better image deformation structures within the inner accretionary wedge of the Nankai Trough, Japan, we apply common reflection angle migration to a legacy two-dimensional seismic data set acquired with a 6 km streamer cable. In this region, many seismic surveys have been conducted to study the seismogenic zone related to plate subduction. However, the details of the accreted sediments beneath the Kumano forearc basin are still unclear due to the poor quality of seismic images caused by multiple reflections, highly attenuated signals, and possibly complex geological structures. Generating common image gathers in the subsurface local angle domain rather than the surface offset domain is more advantageous for imaging geological structures that involve complex wave paths and poor illumination. By applying this method, previously unseen structures are revealed in the thick accreted sediments. The newly imaged geometric features of reflectors, such as the folds in the shallow part of the section and the deep reflectors with stepwise discontinuities, imply deformation structures with multiple thrust faults. The reflections within the deep accreted sediments (approximately 5 km) are mainly mapped to far angles (30°–50°) in the common reflection angles, which correspond to the recorded offset distances greater than 4.5 km. This result indicates that the far offset/angle information is critical to image the deformation structures at depth. The new depth image from the common reflection angle migration provides seismic evidence of multiple thrust faults and their relationship with the megathrust fault that is essential for understanding the structure and evolution of the Nankai Trough seismogenic zone. 相似文献
9.
Toshihiro Ike Gregory F. Moore Shin'ichi Kuramoto Jin-Oh Park Yoshiyuki Kaneda Asahiko Taira 《Island Arc》2008,17(3):358-375
Abstract When seamounts and other topographic highs on an oceanic plate are subducted, they cause significant deformation of the overriding plate and may act as asperities deeper in the seismogenic zone. Kashinosaki Knoll (KK) is an isolated basement high of volcanic origin on the subducting Philippine Sea Plate that will soon be subducted at the eastern Nankai Trough. Seismic reflection imaging reveals a thick accumulation of sediments (∼1200 m) over and around the knoll. The lower portion of the sedimentary section has a package of high-amplitude, continuous reflections, interpreted as turbidites, that lap onto steep basement slopes but are parallel to the gentler basement slopes. Total sediment thickness on the western and northern slopes is approximately 40–50% more than on the summit and southeastern slopes of KK. These characteristics imply that the basal sedimentary section northwest of KK was deposited by infrequent high-energy turbidity currents, whereas the area southeast of KK was dominated by hemipelagic sedimentation over asymmetric basement relief. From the sediment structure and magnetic anomalies, we estimate that the knoll likely formed near the spreading center of the Shikoku Basin in the early Miocene. Its origin differs from that of nearby Zenisu Ridge, which is a piece of the Shikoku Basin crust uplifted along a thrust fault related to the collision of the Izu–Bonin arc and Honshu. KK has been carried into the margin of the Nankai Trough, and its high topography is deflecting Quaternary trench turbidites to the south. When KK collides with the accretionary prism in about 1 My, the associated variations in sediment type and thickness around the knoll will likely result in complex local variations in prism deformation. 相似文献
10.
11.
The origin of strata within the inner accretionary prism of Nankai Trough: Evidence from clay mineral assemblages along the NanTroSEIZE transect 下载免费PDF全文
下载免费PDF全文 Michael B. Underwood 《Island Arc》2018,27(3)
One of the more prominent architectural elements of the Nankai subduction margin, offshore southwest Japan, is an out‐of‐sequence thrust fault (megasplay) that separates the inner accretionary prism from the outer prism. The inner prism (hanging wall of the megasplay) is dominated by mudstone, which is enigmatic when the sedimentary facies is compared to coeval deposits in the Shikoku Basin (i.e. inputs from the subducting Philippine Sea plate) and to coarser‐grained turbidite sequences from the Quaternary trench wedge. Clay mineral assemblages amplify the mismatches of sedimentary facies. Mudstones from the inner prism are uniformly depleted in smectite, with average bulk values of 23–24 wt%, whereas the Shikoku Basin deposits show progressive decreases in proportions of smectite over time, from averages of 46–48 wt% at 10 Ma to 17–21 wt% at 1 Ma. Plate‐boundary reconstructions for the Philippine Sea region provide one solution to the conundrum. Between 15 Ma and 10 Ma, the Pacific plate subducted near the NanTroSEIZE transect, and a trench‐trench‐trench triple junction migrated to the northeast. Accretion during that period involved sediments that had been deposited on the Pacific plate. Motion of the Philippine Sea plate changed from 10 Ma to 6 Ma, resulting in sinistral slip along the proto‐Nankai Trough. Sediments accreted during that period probably had been deposited near the triple junction, with a hybrid detrital provenance. Renewed subduction of the Philippine Sea plate at 6 Ma led to reorganization of watersheds near the Izu–Honshu collision zone and gradual incision of large submarine canyons on both sides of the colliding Izu arc. Accreted Pliocene mudstones share more of an affinity to the triple junction paleoenvironment than they do to Shikoku Basin. These differences between subducting Shikoku Basin strata and accreted Pacific plate sediments have important implications for interpretations of frictional properties, structural architecture, and diagenetic fluid production. 相似文献
12.
Morphologic and geologic observations suggest that subduction of bathymetric highs, such as aseismic ridges, chains of seamounts, and fracture zones, are important in the development of many forearc features and that those features form during relatively brief episodes of intense tectonism. A bathymetric high obliquely entering a subduction zone tends to compress sediments along its leading edge, resulting in arcward compression of the accretionary wedge. A landward deflection of the trench axis and a steepened inner wall result from this deformation. If a significant component of oblique slip occurs along the subduction zone, then along-strike movement of the accretionary wedge may also occur. Stresses resulting from subduction of bathymetric features with sufficient buoyancy or high relief extend farther landward than in the case of smaller, less buoyant features, inducing uplift of the leading edge of the overriding plate. Tectonic erosion of the base of the overriding plate and along-strike transport of are material may also occur. The accelerated tectonism observed along several convergent margins can be attributed to the consumption of bathymetric irregularities on the seafloor rather than temporally abrupt changes in rates and directions of plate motions or other episodic events in the accretionary prism. 相似文献
13.
Abstract We propose that a change in convergence between the Pacific and Eurasian plates and the demise of the Kula-Pacific spreading centre at ca 43 Ma resulted in an ∼40° counterclockwise rotation in shortening direction within the Eocene Shimanto accretionary prism of southwest Japan. Evidence for this interpretation comes from: (1) structural studies of the accreted, deep-sea rocks of the Eocene Shimanto Belt from four widely separated localities; and (2) new plate reconstructions that incorporate the geological history of east Asia as well as the recently recognized reorganization of the Kula and Pacific plates at the time of anomaly 24. These reconstructions suggest that the Philippine Sea plate formed as the Kula-Pacific spreading centre reoriented at the time of anomaly 24 and that the Kula plate was being subducted beneath southwest Japan until ca 43 Ma. Our reconstructions and structural studies suggest that after ca 43 Ma, plate convergence in southwest Japan was oblique to the trend of the continental margin. Oblique convergence was apparently recorded at this time because arc volcanism had decreased and the accretionary prism was not detached from the arc massif. Moreover, the transition from cataclasis and faulting to pressure solution within the accreted sediments may have resulted in a stronger basal décollément, resulting in higher shear stresses along this boundary. We therefore propose that where the arc region and the décollément are of similar strengths, structures within accretionary prisms may record changing plate motions, including oblique convergence. 相似文献
14.
Abstract The Miura Group (Miocene-Pliocene) of south-central Japan shows a number of unique lithological and structural features. The group is composed of volcanic arc-derived marine sediments, and those in the south of the Mineoka Tectonic Belt particularly show various kinds of complex structures such as layer-parallel faults, thrust duplexes, imbricate thrusts and vein structures, yet the degree of compaction of the sediments is still remarkably low. These structures involve deformations at a very early stage and at shallow depths. They arose shortly after sedimentation within the Izu fore arc, and continued during accretion to the Honshu fore arc. The deformational stages are classified here into three stages, the first comprises bedding-parallel faulting associated with gravitational sliding and sediment injection. The first vein structures formed during this stage in the Izu fore arc area. These structures are cut by features developed during the second and third stages: especially thrusting, including duplex and imbricate thrusts. This horizontal shortening occurred during the accretionary prism formation on the subduction plate boundary. The second vein structures formed during this stage in the accretionary prism formation. The origin of the vein structures was discussed both by field observation and laboratory experiments. The latter suggests earthquake origin and the formative process is explained in relation to the field evidence. 相似文献
15.
Toshihiro Ike Gregory F. Moore Shin'ichi Kuramoto Jin-Oh Park Yoshiyuki Kaneda Asahiko Taira 《Island Arc》2008,17(3):342-357
Abstract We documented regional and local variations in basement relief, sediment thickness, and sediment type in the Shikoku Basin, northern Philippine Sea Plate, which is subducting at the Nankai Trough. Seismic reflection data, tied with ocean drilling program drill cores, reveal that variations in the incoming sediment sequences are correlated with basement topography. We mapped the three-dimensional seismic facies distribution and measured representative seismic sequences and units. Trench-parallel seismic profiles show three regional provinces in the Shikoku Basin that are distinguished by the magnitude of basement relief and sediment thickness: Western (<200–400 m basement relief, >600 m sediment thickness), Central (>1500 m relief, ∼2000 m sediments), and Eastern (<600 m relief, ∼1200 m sediments) provinces. The total thickness of sediment in basement lows is as much as six times greater than that over basement highs. Turbidite sedimentation in the Shikoku Basin reflects basement control on deposition, leading to the local presence or absence of turbidite units deposited during the middle Oligocene to the middle Miocene. During the first phase of sedimentation, most basement lows were filled with turbidites, resulting in smooth seafloor morphology that does not reflect basement relief. A second phase of turbidite deposition in the Eastern Province was accompanied by significant amounts of hemipelagic sediments interbedded with turbidite layers compared to the other provinces because of its close proximity to the Izu–Bonin Island Arc. Both regional and local variations in basement topography and sediment thickness/type have caused lateral heterogeneities on the underthrusting plate that will, in turn, influence lateral fluid flow along the Nankai accretionary prism. 相似文献
16.
Gaku Kimura Yasuyuki Nakamura Kazuya Shiraishi Gou Fujie Shuichi Kodaira Asuka Yamaguchi Rina Fukuchi Yoshitaka Hashimoto 《Island Arc》2021,30(1):e12402
The Nankai Trough, Japan, is a subduction zone characterized by the recurrence of disastrous earthquakes and tsunamis. Slow earthquakes and associated tremor also occur intermittently and locally in the Nankai Trough and the causal relationship between slow earthquakes and large earthquakes is important to understanding subduction zone dynamics. The Nankai Trough off Muroto, Shikoku Island, near the southeast margin of the rupture segment of the 1946 Nankai earthquake, is one of three regions where slow earthquakes and tremor cluster in the Nankai Trough. On the Philippine Sea plate, the rifting of the central domain of the Shikoku Basin was aborted at ~15 Ma and underthrust the Nankai forearc off Muroto. Here, the Tosa-Bae seamount and other high-relief features, which are northern extension of the Kinan Seamount chain, have collided with and indented the forearc wedge. In this study, we analyzed seismic reflection profiles around the deformation front of accretionary wedge and stratigraphically correlated them to drilling sites off Muroto. Our results show that the previously aborted horst-and-graben structures, which were formed around the spreading center of the Shikoku Basin at ~15 Ma, were rejuvenated locally at ~6 Ma and more regionally at ~3.3 Ma and have remained active since. The reactivated normal faulting has enhanced seafloor roughness and appears to affect the locations of slow earthquakes and tremors. Rejuvenated normal faulting is not limited to areas near the Nankai Trough, and extends more than 200 km into the Shikoku Basin to the south. This extension might be due to extensional forces applied to the Philippine Sea plate, which appear to be driven by slab-pull in the Ryukyu and Philippine trenches along the western margin of the Philippine Sea plate. 相似文献
17.
The Andaman–Sumatra margin displays a unique set‐up of extensional subduction–accretion complexes, which are the Java Trench, a tectonic (outer arc) prism, a sliver plate, a forearc, oceanic rises, inner‐arc volcanoes, and an extensional back‐arc with active spreading. Existing knowledge is reviewed in this paper, and some new data on the surface and subsurface signatures for operative geotectonics of this margin is analyzed. Subduction‐related deformation along the trench has been operating either continuously or intermittently since the Cretaceous. The oblique subduction has initiated strike–slip motion in the northern Sumatra–Andaman sector, and has formed a sliver plate between the subduction zone and a complex, right‐lateral fault system. The sliver fault, initiated in the Eocene, extended through the outer‐arc ridge offshore from Sumatra, and continued through the Andaman Sea connecting the Sagaing Fault in the north. Dominance of regional plate dynamics over simple subduction‐related accretionary processes led to the development and evolution of sedimentary basins of widely varied tectonic character along this margin. A number of north–south‐trending dismembered ophiolite slices of Cretaceous age, occurring at different structural levels with Eocene trench‐slope sediments, were uplifted and emplaced by a series of east‐dipping thrusts to shape the outer‐arc prism. North–south and east–west strike–slip faults controlled the subsidence, resulting in the development of a forearc basins and record Oligocene to Miocene–Pliocene sedimentation within mixed siliciclastic–carbonate systems. The opening of the Andaman Sea back‐arc occurred in two phases: an early (～11 Ma) stretching and rifting, followed by spreading since 4–5 Ma. The history of inner‐arc volcanic activity in the Andaman region extends to the early Miocene, and since the Miocene arc volcanism has been associated with an evolution from felsic to basaltic composition. 相似文献
18.
The hemipelagic mudrocks of the Nankai accretionary prism, Japan, contain hydrothermal deposits associated with a relict spreading center in the Shikoku Basin. Initial work on core samples from Ocean Drilling Program site 808 found several samples with elevated concentrations of calcium, magnesium, iron and manganese, at depths of between 1060 and 1111 m below sea floor. However, the origin of these sediments was uncertain, due to a lack of data. There was no recorded evidence of whether these elevated concentrations were present throughout this interval of core, or if they were present as discrete layers with the background hemipelagic mudrocks in between. In the present study the core was resampled, and the sediments with anomalous chemical compositions were found to be present in discrete layers. This fact, along with a detailed interpretation of their geochemistry, has allowed them to be identified as hydrothermal sediments, associated with the relict spreading center in the Shikoku Basin. The lower (older) two layers display a chemical composition typical of umbers, while the upper (younger) two layers are metalliferous mudrocks typical of deposits found further from the spreading center. 相似文献
19.
Chaotic rock units exposed in the upper part of the accretionary complex preserve detailed tectonic information related to the periods before, during, and immediately after accretion. Based on the detailed survey in the upper Miocene Miura–Boso accretionary complex, central Japan, three types of chaotic rock units were identified on the basis of the grain sizes and characteristics of blocks and surrounding matrices. The chaotic rock units composed of silt matrices and sandy to pebbly blocks (Type 3) formed by gravity-driven slumping upon the seafloor. The slumping occurred contemporaneously with deposition of the Misaki and Nishizaki Formations within the Izu–Bonin forearc. Vertical variations in the direction of slump vergence represent successive changes from an initially flat seabed to tilting to the northwest and finally to the southeast. Slumping with a northwest vergence indicates landward tilting of the seafloor immediately prior to accretion, whereas vergence to the southeast reflects oceanward tectonic tilting that occurred once the sediments had crossed the deformation front. Other chaotic rock units that have matrices abundant in sand and pebbles (Types 1, 2) formed as a result of subsurface liquefaction and injection associated with large earthquakes that occurred during and after accretion of the sediments. These chaotic rock units are useful in examining surface/subsurface changes such as tectonic tilting of the seafloor and earthquake events during the initial accretion process. 相似文献
20.
The Shikoku Basin hemipelagic sequence, which underlies the Nankai Trough wedge, S.W. Japan, thins by 50% between the outer edge of the trench wedge and DSDP Site 582, 14 km arcward. A sedimentation model, which incorporates changes in sedimentation rates with time and with distance from the trench wedge toe, indicates that 57% of the total thinning occurs as a result of temporally varying sedimentation rates and a time transgressive facies boundary between the trench wedge turbidites and the underlying hemipelagites. Burial-induced consolidation beneath the wedgeshaped turbiditic overburden, accounts for the remaining 43% of arcward thinning within the hemipelagic unit. Rapid dewatering, modeled as one-dimensional consolidation suggests that the excess pore water pressures are quite low during this progressive dewatering. Thus, high pore water pressures should not be assumed to occur universally in convergent margin settings. Normal faults and vein structures in the hemipelagites suggest near-horizontal extension in addition to vertical consolidation. The estimates of excess pore water pressures together with fault geometries and horizontal extensional strains, determined from the geometry of the subducting oceanic plate, can be used to constrain the stress conditions at failure. The expulsion of hot water from the rapidly dewatering sediments in the Nankai Trough may help to explain anomalously high heat flow in the central part of the trough. 相似文献