共查询到20条相似文献，搜索用时 671 毫秒
1.
Luděk Klimeš 《Studia Geophysica et Geodaetica》2018,62(2):255-260
For a given stiffness tensor (tensor of elastic moduli) of a generally anisotropic medium, we can estimate the extent to which the medium is transversely isotropic, and determine the direction of its reference symmetry axis. In this paper, we rotate the given stiffness tensor about this reference symmetry axis, and determine the reference transversely isotropic (uniaxial) stiffness tensor as the average of the rotated stiffness tensor over all angles of rotation. The obtained reference transversely isotropic (uniaxial) stiffness tensor represents an analytically differentiable approximation of the given generally anisotropic stiffness tensor. The proposed analytic method is compared with a previous numerical method in two numerical examples. 相似文献
2.
The coupling ray theory is usually applied to anisotropic common reference rays, but it is more accurate if it is applied to reference rays which are closer to the actual wave paths. If we know that a medium is close to uniaxial (transversely isotropic), it may be advantageous to trace reference rays which resemble the SH–wave and SV–wave rays. This paper is devoted to defining and tracing these SH and SV reference rays of elastic S waves in a heterogeneous generally anisotropic medium which is approximately uniaxial (approximately transversely isotropic), and to the corresponding equations of geodesic deviation (dynamic ray tracing). All presented equations are simultaneously applicable to ordinary and extraordinary reference rays of electromagnetic waves in a generally bianisotropic medium which is approximately uniaxially anisotropic. The improvement of the coupling–ray–theory seismograms calculated along the proposed SH and SV reference rays, compared to the coupling–ray–theory seismograms calculated along the anisotropic common reference rays, has already been numerically demonstrated by the authors in four approximately uniaxial velocity models. 相似文献
3.
The behaviour of the actual polarization of an electromagnetic wave or elastic S–wave is described by the coupling ray theory, which represents the generalization of both the zero–order isotropic and anisotropic ray theories and provides continuous transition between them. The coupling ray theory is usually applied to anisotropic common reference rays, but it is more accurate if it is applied to reference rays which are closer to the actual wave paths. In a generally anisotropic or bianisotropic medium, the actual wave paths may be approximated by the anisotropic–ray–theory rays if these rays behave reasonably. In an approximately uniaxial (approximately transversely isotropic) anisotropic medium, we can define and trace the SH (ordinary) and SV (extraordinary) reference rays, and use them as reference rays for the prevailing–frequency approximation of the coupling ray theory. In both cases, i.e. for the anisotropic–ray–theory rays or the SH and SV reference rays, we have two sets of reference rays. We thus obtain two arrivals along each reference ray of the first set and have to select the correct one. Analogously, we obtain two arrivals along each reference ray of the second set and have to select the correct one. In this paper, we suggest the way of selecting the correct arrivals. We then demonstrate the accuracy of the resulting prevailing–frequency approximation of the coupling ray theory using elastic S waves along the SH and SV reference rays in four different approximately uniaxial (approximately transversely isotropic) velocity models. 相似文献
4.
In an acoustic transversely isotropic medium, there are two waves that propagate. One is the P-wave and another one is the S-wave (also known as S-wave artefact). This paper is devoted to analyse the S-wave in two-dimensional acoustic transversely isotropic media with a tilted symmetry axis. We derive the S-wave slowness surface and traveltime function in a homogeneous acoustic transversely isotropic medium with a tilted symmetry axis. The S-wave traveltime approximations in acoustic transversely isotropic media with a tilted symmetry axis can be mapped from the counterparts for acoustic transversely isotropic media with a vertical symmetry axis. We consider a layered two-dimensional acoustic transversely isotropic medium with a tilted symmetry axis to analyse the S-wave moveout. We also illustrate the behaviour of the moveout for reflected S-wave and converted waves. 相似文献
5.
介质的弹性常数为三维四阶张量的分量,共有８１个,由于应力张量和应变张量的对称性及能量密度是应变的二次函数,一般各向异常性介质的独立弹性常数可减为２１个,如果介质具有较高的对称性,独立弹性常数的数目会更少。 对于地壳和上地幔,具有５个独立弹性常数的横向各向同性介质是一个非常好的近似,本研究中横向各向同性介质的对称轴方向可以是任意的（即对称轴可以不平等于铅直方向）,在此情况下,需要进行坐标变换,如果已知介质在某一坐标系（其坐标轴平行或垂直于介质的对称轴）中的弹性常数,我们能够容易地利用变换公式得到变换后新坐标系中的弹性常数。 本文提出了一种方案,利用伪谱法既能模拟横向各向同性介质中的平面波,也能模拟点源激发的波场。在勘探地球物理和地震学中,模拟横向各向同性介拮中传播的平面波及区域源产生的波是最重要的研究课题之一。然而在一般各向异性介质中,很难或不可能确定弹性波的相速度和偏振方向,但在横向各向同性介质中,则可以通过坐标变换来实现,这里我们所提出的方法可以用于横向各向同性介质中弹性波的模拟。 相似文献
6.
7.
假设横向各向同性(TI)介质的对称轴是垂直的(VTI)或者水平的(HTI)能给实际资料处理带来便利,然而实际TI介质的对称轴往往是倾斜的(TTI),忽略对称轴倾角可能给各向异性参数提取和成像带来偏差,因此需要研究是否能、以及什么条件下能忽略TTI介质对称轴倾角.本文通过理论研究和数值分析研究了与TTI介质弹性性质最接近的VTI介质(OAVTI)的弹性常数和各向异性参数与原TTI介质的弹性常数和各向异性参数之间的联系与差别.结果表明:OAVTI介质各向异性参数与原TTI介质各向异性参数之间的差别可统一表示成F(α0/β0,ε,δ,γ)ξ2的形式,其中F(α0/β0,ε,δ,γ)是无量纲各向异性参数(ε, δ, γ)的线性函数,ξ是对称轴倾角;ξ的大小对各参数的误差起主导作用,一般不建议忽略20°~25°以上的对称轴倾角;当ξ较小时,即使是对强各向异性的TTI介质作VTI近似,引起的P波各向异性参数误差也很小,因此在纵波资料处理中忽略TTI介质对称轴倾角通常是可行的;即使在小ξ条件下,倾斜对称轴对SV波也有显著影响,因此在转换波资料处理中,不建议忽略TTI介质的对称轴倾角.本文的研究为分析忽略TTI介质对称轴倾角的可行性提供了理论依据和简便的判据. 相似文献
8.
Michael A. Schoenberg 《Geophysical Prospecting》2009,57(2):169-185
A vertically fractured transversely isotropic (VFTI) elastic medium is one in which any number of sets of vertical aligned fractures (each set has its normal lying in the horizontal x1, x2‐plane) pervade the medium and the sets of aligned fractures are the only features of the medium disturbing the axi‐symmetry about the x3‐axis implying that in the absence of fractures, the background medium is transversely isotropic (TI). Under the assumptions of long wavelength equivalent medium theory, the compliance matrix of a fractured medium is the sum of the background medium's compliance matrix and a fracture compliance matrix. For sets of parallel rotationally symmetric fractures (on average), the fracture compliance matrix is dependent on 3 parameters − its normal and tangential compliance and its strike direction. When one fracture set is present, the medium is orthorhombic and the analysis is straightforward. When two (non‐orthogonal) or more sets are present, the overall medium is in general elastically monoclinic; its compliance tensor components are subject to two equalities yielding an 11 parameter monoclinic medium. Constructing a monoclinic VFTI medium with n embedded vertical fracture sets, requires 5 TI parameters plus 3×n fracture set parameters. A deconstruction of such an 11 parameter monoclinic medium involves using its compliance tensor to find a background transversely isotropic medium and several sets of vertical fractures which, in the long wavelength limit, will behave exactly as the original 11 parameter monoclinic medium. A minimal deconstruction, would be to determine, from the 11 independent components, the transversely isotropic background (5 parameters) and two fracture sets (specified by 2 × 3 = 6 parameters). Two of the background TI medium's compliance matrix components are known immediately by inspection, leaving nine monoclinic components to be used in the minimal deconstruction of the VFTI medium. The use of the properties of a TI medium, which are linear relations on its compliance components, allows the deconstruction to be reduced to solving a pair of non‐linear equations on the orientations of two fracture sets. A single root yielding a physically meaningful minimum deconstruction yields a unique minimal representation of the monoclinic medium as a VFTI medium. When no such root exists, deconstruction requires an additional fracture set and uniqueness is lost. The boundary between those monoclinic media that have a unique minimal representation and those that do not is yet to be determined. 相似文献
9.
由于构造运动等作用,TI介质对称轴往往沿空间任意方向分布,具有任意空间取向对称轴的TI（ATI）介质更符合实际地质情况.VTI介质与ATI介质的相速度在形式上具有一致性,VTI介质中地震波的相角对应ATI介质对称轴与地震波传播方向的夹角.本文基于Tsvankin的VTI介质精确相速度公式,利用TI介质对称轴和地震波传播方向上单位向量的数量积和向量积来计算ATI介质的精确相速度.根据弱各向异性假设,导出qP波和qSV波的近似相速度,分析了近似公式的误差,讨论总结了ATI介质qP波和qSV波的相速度特征.本文中的单位向量采用观测坐标系表示,通过相角关系,可以较为方便地由ATI介质近似相速度导出频散关系,然后借助傅里叶逆变换推导出时间-波数域qP波和qSV波解耦的波动方程.数值算例表明本文的波动方程是qP波和qSV波解耦的,波场计算结果稳定,未出现明显的数值频散,验证了本文方法的有效性. 相似文献
10.
11.
Two-dimensional seismic processing is successful in media with little structural and velocity variation in the direction perpendicular to the plane defined by the acquisition direction and the vertical axis. If the subsurface is anisotropic, an additional limitation is that this plane is a plane of symmetry. Kinematic ray propagation can be considered as a two-dimensional process in this type of medium. However, two-dimensional processing in a true-amplitude sense requires out-of-plane amplitude corrections in addition to compensation for in-plane amplitude variation. We provide formulae for the out-of-plane geometrical spreading for P- and S-waves in transversely isotropic and orthorhombic media. These are extensions of well-known isotropic formulae.
For isotropic and transversely isotropic media, the ray propagation is independent of the azimuthal angle. The azimuthal direction is defined with respect to a possibly tilted axis of symmetry. The out-of-plane spreading correction can then be calculated by integrating quantities which describe in-plane kinematics along in-plane rays. If, in addition, the medium varies only along the vertical direction and has a vertical axis of symmetry, no ray tracing need be carried out. All quantities affecting the out-of-plane geometrical spreading can be derived from traveltime information available at the observation surface.
Orthorhombic media possess no rotational symmetry and the out-of-plane geometrical spreading includes parameters which, even in principle, are not invertible from in-plane experiments. The exact and approximate formulae derived for P- and S-waves are nevertheless useful for modelling purposes. 相似文献
For isotropic and transversely isotropic media, the ray propagation is independent of the azimuthal angle. The azimuthal direction is defined with respect to a possibly tilted axis of symmetry. The out-of-plane spreading correction can then be calculated by integrating quantities which describe in-plane kinematics along in-plane rays. If, in addition, the medium varies only along the vertical direction and has a vertical axis of symmetry, no ray tracing need be carried out. All quantities affecting the out-of-plane geometrical spreading can be derived from traveltime information available at the observation surface.
Orthorhombic media possess no rotational symmetry and the out-of-plane geometrical spreading includes parameters which, even in principle, are not invertible from in-plane experiments. The exact and approximate formulae derived for P- and S-waves are nevertheless useful for modelling purposes. 相似文献
12.
13.
In seismic data processing, serious problems could be caused by the existence of triplication and need to be treated properly for tomography and other inversion methods. The triplication in transversely isotropic medium with a vertical symmetry axis has been well studied and concluded that the triplicated traveltime only occurs for S wave and there is no triplication for P and converted PS waves since the P wave convexity slowness always compensates the S wave slowness concavity. Compared with the vertical symmetry axis model, the research of the triplication in transversely isotropic medium with a tilted symmetry axis is still keeping blank. In order to analyse the triplication for the converted wave in the tilted symmetry axis model, we examine the traveltime of the triplication from the curvature of averaged P and S wave slowness. Three models are defined and tested in the numerical examples to illustrate the behaviour of the tilted symmetry axis model for the triplicated traveltime with the change of the rotation angle. Since the orientation of an interface is related to the orientation of the symmetry axis, the triplicated traveltime is encountered for the converted wave in the tilted symmetry axis model assuming interfaces to be planar and horizontal. The triplicated region is influenced by the place and level of the concave curvature of the P and S wave slowness. 相似文献
14.
The conventional intersection method for earthquake location in isotropic media is developed in the case of transversely isotropic
media with a tilted symmetry axis (TTI media). The hypocenter is determined using its loci, which are calculated through a
minimum travel time tree algorithm for ray tracing in TTI media. There are no restrictions on the structural complexity of
the model or on the anisotropy strength of the medium. The location method is validated by its application to determine the
hypocenter and origin time of an event in a complex TTI structure, in accordance with four hypotheses or study cases: (a)
accurate model and arrival times, (b) perturbed model with randomly variable elastic parameter, (c) noisy arrival time data,
and (d) incomplete set of observations from the seismic stations. Furthermore, several numerical tests demonstrate that the
orientation of the symmetry axis has a significant effect on the hypocenter location when the seismic anisotropy is not very
weak. Moreover, if the hypocentral determination is based on an isotropic reference model while the real medium is anisotropic,
the resultant location errors can be considerable even though the anisotropy strength does not exceed 6.10%. 相似文献
15.
Based on the pure quasi-P wave equation in transverse isotropic media with a vertical symmetry axis (VTI media), a quasi-P wave equation is obtained in transverse isotropic media with a tilted symmetry axis (TTI media). This is achieved using projection transformation, which rotates the direction vector in the coordinate system of observation toward the direction vector for the coordinate system in which the z-component is parallel to the symmetry axis of the TTI media. The equation has a simple form, is easily calculated, is not influenced by the pseudo-shear wave, and can be calculated reliably when δ is greater than ε. The finite difference method is used to solve the equation. In addition, a perfectly matched layer (PML) absorbing boundary condition is obtained for the equation. Theoretical analysis and numerical simulation results with forward modeling prove that the equation can accurately simulate a quasi-P wave in TTI medium. 相似文献
16.
The moveout approximations play an important role in seismic data processing. The standard hyperbolic moveout approximation is based on an elliptical background model with two velocities: vertical and normal moveout. We propose a new set of moveout approximations based on a perturbation series in terms of anellipticity parameters using the alternative elliptical background model defined by vertical and horizontal velocities. We start with a transversely isotropic medium with a vertical symmetry axis. Then, we extend this approach to a homogeneous orthorhombic medium. To define the perturbation coefficients for a new background, we solve the eikonal equation with horizontal velocities in transversely isotropic medium with a vertical symmetry axis and orthorhombic media. To stabilise the perturbation series and improve the accuracy, the Shanks transform is applied for all the cases. We select different parameterisations for both velocities and anellipticity parameters for an orthorhombic model. From the comparison in traveltime error, the new moveout approximations result in better accuracy comparing with the standard perturbation‐based methods and other approximations. 相似文献
17.
The offset‐midpoint travel‐time pyramid for P‐wave in 2D transversely isotropic media with a tilted symmetry axis 
下载免费PDF全文
下载免费PDF全文 For pre‐stack phase‐shift migration in homogeneous isotropic media, the offset‐midpoint travel time is represented by the double‐square‐root equation. The travel time as a function of offset and midpoint resembles the shape of Cheops’ pyramid. This is also valid for transversely isotropic media with a vertical symmetry axis. In this study, we extend the offset‐midpoint travel‐time pyramid to the case of 2D transversely isotropic media with a tilted symmetry axis. The P‐wave analytical travel‐time pyramid is derived under the assumption of weak anelliptical property of the tilted transverse isotropy media. The travel‐time equation for the dip‐constrained transversely isotropic model is obtained from the depth‐domain travel‐time pyramid. The potential applications of the derived offset‐midpoint travel‐time equation include pre‐stack Kirchhoff migration, anisotropic parameter estimation, and travel‐time calculation in transversely isotropic media with a tilted symmetry axis. 相似文献
18.
Václav Bucha 《Studia Geophysica et Geodaetica》2012,56(2):533-552
We use Kirchhoff prestack depth migration to calculate migrated sections in 3-D simple anisotropic homogeneous velocity models in order to demonstrate the impact of anisotropy on migrated images. The recorded wave field is generated in models composed of two homogeneous layers separated by one either non-inclined or inclined curved interface. The anisotropy in the upper layer is triclinic. We apply Kirchhoff prestack depth migration to velocity models with different types of anisotropy: a triclinic anisotropic medium, an isotropic medium, transversely isotropic media with a horizontal (HTI) and vertical (VTI) symmetry axis. We observe asymmetry in migration caused by triclinic anisotropy and we show the errors of the migrated interface caused by inaccurate velocity models used for migration. The study is limited to P-waves. 相似文献
19.
The presence of triplications (caustics) can be a serious problem in seismic data processing and analysis. The traveltime curve becomes multi‐valued and the geometrical spreading correction factor tends to zero due to energy focusing. We analyse the conditions for the qSV‐wave triplications in a homogeneous transversely isotropic medium with vertical symmetry axis. The proposed technique can easily be extended to the case of horizontally layered vertical symmetry axis medium. We show that the triplications of the qSV‐wave in a multilayered medium imply certain algebra. We illustrate this algebra on a two‐layer vertical symmetry axis model. 相似文献
20.
Tariq Alkhalifah 《Geophysical Prospecting》2015,63(5):1126-1141
Wavefield extrapolation operators for elliptically anisotropic media offer significant cost reduction compared with that for the transversely isotropic case, particularly when the axis of symmetry exhibits tilt (from the vertical). However, elliptical anisotropy does not provide accurate wavefield representation or imaging for transversely isotropic media. Therefore, we propose effective elliptically anisotropic models that correctly capture the kinematic behaviour of wavefields for transversely isotropic media. Specifically, we compute source‐dependent effective velocities for the elliptic medium using kinematic high‐frequency representation of the transversely isotropic wavefield. The effective model allows us to use cheaper elliptic wave extrapolation operators. Despite the fact that the effective models are obtained by matching kinematics using high‐frequency asymptotic, the resulting wavefield contains most of the critical wavefield components, including frequency dependency and caustics, if present, with reasonable accuracy. The methodology developed here offers a much better cost versus accuracy trade‐off for wavefield computations in transversely isotropic media, particularly for media of low to moderate complexity. In addition, the wavefield solution is free from shear‐wave artefacts as opposed to the conventional finite‐difference‐based transversely isotropic wave extrapolation scheme. We demonstrate these assertions through numerical tests on synthetic tilted transversely isotropic models. 相似文献