共查询到20条相似文献，搜索用时 218 毫秒
1.
Introduction The effect of local topographies on seismic wave propagation is one of the most attractive topics in seismology. It may be resolved by either an analytical method or a numerical method. Here, the analytical method is the wave function expansion method; numerical methods include the finite difference, finite element, boundary integration equation, and discrete wave number method, etc. The advantage of these numerical methods is that they can be applied to local inhomogeneity and ir… 相似文献
2.
Introduction Scattering of incident waves by local topographies is one of the most attractive topics in the field of engineering seismology. They can be resolved by either a numerical method or an analyti-cal method. The numerical methods include finite difference method, finite element method, boundary element method, etc. The analytical method is the wave function expansion method. Al-though numerical methods can be used for arbitrary-shaped topographies, the analytical solutions are still … 相似文献
3.
Scattering of plane P waves by circular-arc layered alluvial valleys: An analytical solution 总被引：1，自引：0，他引：1
IntroductionThe site effect of local inhomogeneity and irregularity on seismic wave propagation is one of the most attractive topics in seismology. The problem may be resolved by either analytical method or numerical method. Here, the analytical method is the wave function expansion method; numerical methods include the finite difference, finite element, boundary integration equation, and discrete wave number method, etc. Although these numerical methods can be applied for sites of arbitrary s… 相似文献
4.
Transient analysis of 1D inhomogeneous media by dynamic inhomogeneous finite element method 总被引：1，自引：1，他引：0
The dynamic inhomogeneous finite element method is studied for use in the transient analysis of one dimensional inhomogeneous media. The general formula of the inhomogeneous consistent mass matrix is established based on the shape function. In order to research the advantages of this method, it is compared with the general finite element method. A linear bar element is chosen for the discretization tests of material parameters with two fictitious distributions. And, a numerical example is solved to observe the differences in the results between these two methods. Some characteristics of the dynamic inhomogeneous finite element method that demonstrate its advantages are obtained through comparison with the general finite element method. It is found that the method can be used to solve elastic wave motion problems with a large element scale and a large number of iteration steps. 相似文献
5.
Introduction There are two kinds of methods for the mathematic study on electro-magnetic induction in geo-field: one is analytic method, such as integral equation method; the other is numerical model-ing method, such as finite difference method and finite element method. The analytic method can only be applied to the conductor with very simple shape, such as sphere, circular cylinder, etc. With the increasing of computing speed and popularity of computer, the numerical modeling methods are use… 相似文献
6.
In numerical simulation of wave scattering under oblique incident body waves using the finite element method, the free field motion at the incident lateral boundary induced by the background layered half-space complicates the computational area. In order to replace the complex frequency domain method, a time-domain method to calculate the free field motion of a layered half-space subjected to oblique incident body waves is developed in this paper. The new method decouples the equations of motion used in the finite element method and offers an interpolation formula of the free field motion. This formula is based on the fact that the apparent horizontal velocity of the free field motion is constant and can be calculated exactly. Both the theoretical analysis and numerical results demonstrate that the proposed method offers a high degree of accuracy. 相似文献
7.
An improved pseudo-static method for seismic resistant design of underground structures 总被引：1，自引：0，他引：1
This paper describes a commonly used pseudo-static method in seismic resistant design of the cross section of underground structures. Based on dynamic theory and the vibration characteristics of underground structures, the sources of errors when using this method are analyzed. The traditional seismic motion loading approach is replaced by a method in which a one-dimensional soil layer response stress is differentiated and then converted into seismic live loads. To validate the improved method, a comparison of analytical results is conducted for internal forces under earthquake shaking of a typical shallow embedded box-shaped subway station structure using four methods： the response displacement method, finite element response acceleration method, the finite element dynamic analysis method and the improved pseudo-static calculation method. It is shown that the improved finite element pseudo-static method proposed in this paper provides an effective tool for the seismic design of underground structures. The evaluation yields results close to those obtained by the finite element dynamic analysis method, and shows that the improved finite element pseudo-static method provides a higher degree of precision. 相似文献
8.
Simulation of the seismic response of sedimentary basins with constant-gradient velocity along arbitrary direction using boundary element method:SH case 
下载免费PDF全文
下载免费PDF全文 Zengxi Ge 《地震科学（英文版）》2010,23(2):149-155
We presented a boundary element method using the approximate analytical Green's function given by Sánchez-Sesma et al.Coordinate transform is introduced to extend the method to deal with the model with constant-gradient velocity along oblique direction.The method is validated by comparing the numerical results with other independent methods.This method provides a useful tool for analyzing local site effects.We computed seismic response for two series of models.The results in both frequency and time domains are analyzed and show complex amplification patterns.The fundamental mode of resonance is dependent not only on the velocity at the free surface but also on the velocity distribution of the whole basin.For the higher modes of vibration the heterogeneous basin also has its own characteristic. 相似文献
9.
基于三角网格的有限差分法叠后逆时偏移 总被引：1，自引：1，他引：0
Compared with other migration methods, reverse-time migration is based on a precise wave equation, not an approximation, and performs extrapolation in the depth domain rather than the time domain. It is highly accurate and not affected by strong subsurface structure complexity and horizontal velocity variations. The difference method based on triangular grids maintains the simplicity of the difference method and the precision of the finite element method. It can be used directly for forward modeling on models with complex top surfaces and migration without statics preprocessing. We apply a finite difference method based on triangular grids for post-stack reverse-time migration for the first time. Tests on model data verify that the combination of the two methods can achieve near-perfect results in application. 相似文献
10.
Consideration of structure-foundation-soil dynamic interaction is a basic requirement in the evaluation of the seismic safety of nuclear power facilities. An efficient and accurate dynamic interaction numerical model in the time domain has become an important topic of current research. In this study, the scaled boundary finite element method （SBFEM） is improved for use as an effective numerical approach with good application prospects. This method has several advantages, including dimensionality reduction, accuracy of the radial analytical solution, and unlike other boundary element methods, it does not require a fundamental solution. This study focuses on establishing a high performance scaled boundary finite element interaction analysis model in the time domain based on the acceleration unit-impulse response matrix, in which several new solution techniques, such as a dimensionless method to solve the interaction force, are applied to improve the numerical stability of the actual soil parameters and reduce the amount of calculation. Finally, the feasibility of the time domain methods are illustrated by the response of the nuclear power structure and the accuracy of the algorithms are dynamically verified by comparison with the refinement of a large-scale viscoelastic soil model. 相似文献
11.
12.
13.
Rayleigh波在浅圆凹陷地形附近的散射:高频解答 总被引：4，自引：1，他引：4
利用波函数展开法给出了Rayleigh波在浅圆凹陷地形附近散射的一个高频解析解，并分析了入射频率、凹陷地形宽度和深度等因素对波散射的影响。数值结果表明，由于Rayleigh波幅值随深度而衰减，凹陷地形表面位移幅值整体上较小，且随着凹陷地形深度的增加而减小；由于Rayleigh波幅值还随频率而衰减，随着入射频率的升高，凹陷地形表面位移幅值逐渐减小；由于凹陷地形的屏障作用，在人射波的近端，地表位移分布变得相对复杂，地表位移峰值出现在左角点附近，而在入射波远端，地表位移分布相对简单，地表位移峰值出现在距凹陷地形较远的地方。 相似文献
14.
圆弧状沉积盆地与软土单覆盖层出平面地表运动对比 总被引：2，自引：0，他引：2
采用解析方法，通过圆弧状沉积盆地与同样参数的软土均匀单覆盖层的对比，研究沉积盆地对平面SH波二维散射效应和其出平面地表运动。数值对比结果表明：（1）波垂直入射时盆地中央地表位移幅值反应，其随频率变化形式与软土单覆盖层的地表运动有较强的对应性，且此时单覆盖层地表位移幅值为其下降；（2）盆地的二维散射效应特点显著波的汇聚作用使盆地中的地表运动显著放大，总体上较软土单覆盖层的地表位移幅值要大，其频域内的最大反应则明显大于单覆盖层情况，但最大反应在盆地表面出现的位置依赖于入射波角度、盆地深宽比和盆地的软硬程度；（3）沉积盆地中地表位移运动有强烈扭转效应，且随盆地变软和入射波频率增高而增强。 相似文献
15.
以Biot饱和多孔介质动力学理论为基础,利用Fourier Bessel级展开法,给出了饱和多孔介质半空间中半球形凹陷地形对入射平面SV波散射问题的解析解.利用这一解析解数值计算地表位移幅值,分析入射角、入射波频率对地表位移幅值的影响,并与现存的单相介质情况下三维半球形凹陷问题解析解进行对比得出如下结论：(1)本文两相介质模型与单相介质模型有很大区别;(2)入射角、入射频率对场地表面位移分量有重要影响;(3)随着入射角、入射频率的增大,地表位移分布变得更复杂,且放大效应比单相介质模拟结果更加显著. 相似文献
16.
This paper presents an analytical solution for two-dimensional scattering and diffraction of plane P waves by circular-arc alluvial valleys with shallow saturated soil deposits. The solution is based on Biot's dynamic theory for saturated porous media, and derived by employing Fourier–Bessel series expansion technique. In this analysis, soil deposits in the circular-arc valley are modeled as saturated porous media based on Biot's dynamic theory, and the circular-arc valley is assumed to be imbedded in an infinite half-space, filled with elastic single-phase media. Numerical results from this solution show that the amplitudes of displacement at the surface of an alluvial valley are mainly relative to the angle of incidence, the dimensionless frequency of incident P wave, the degree of saturation and porosity of soil deposits, and the stiffness and Poisson's ratio of the solid skeleton of the soil deposits. Furthermore, the proposed solution is compared with the previous solution, in which the soil deposit was modeled as an elastic single-phase solid. 相似文献
17.
Three-dimensional scattering of seismic waves by a cylindrical alluvial valley embedded in a layered half-space is investigated by using the combination of the boundary integral representation and the finite element method. The surface displacements due to incident plane harmonic body waves (P, SV and SH) propagating at an arbitrary angle to the axis of the cylindrical valley are evaluated numerically for two semi-elliptical alluvial valleys. The presence of the layer is found to have a strong effect on the amplification of the surface displacements in some cases. The three-dimensional motion seems to be quite critical and may cause large amplification. The surface ground motion becomes significant when compared with corresponding free-field motion as the wavelengths become comparable to the characteristic length of the valley. The maximum amplification always occurs atop the valley. Numerical results show that the amplitude and the amplification pattern of the surface displacement strongly depend upon the frequency, the angle and the type of the incident waves. 相似文献
18.
利用波函数的Fourier-Bessel级数展开法,推导出了含任意多个圆弧状沉积层的谷地在平面SV波入射下稳态动力响应的解析解,并分析了该级数形式的解析解随着截断项数的收敛问题.其结果表明,该级数解能够在一个非常宽的频带范围内收敛;通过在简化条件下与现有其他解析解的比较,验证了该解析解的正确性;并利用该解析解,以稳态地面运动的位移幅值和相位差为基本参数,在一个较宽的频带范围内讨论了谷地中沉积介质的成层性对地面运动的影响,其结果表明对于多层谷地而言,当入射波频率较高时,散射波之间的干涉显著并且出现了能量聚焦现象. 相似文献
19.
20.
针对层状半空间中沉积谷地对斜入射瑞雷波的三维散射问题, 采用直接刚度法计算自由场波场, 以层状半空间中移动斜线均布荷载动力格林影响函数求解三维散射波场, 建立了求解该问题的间接边界元方法. 通过与已有结果的比较, 验证了该方法的正确性, 并以均匀半空间以及弹性基岩上单一土层场地中沉积谷地为例进行了计算分析. 研究结果表明: 层状半空间与均匀半空间中沉积谷地对瑞雷波的散射存在显著差别; 层状半空间中瑞雷波的振动模态对沉积附近位移幅值有着重要影响; 土层刚度和厚度等参数也对沉积附近位移幅值大小及空间分布有着显著的影响. 相似文献