首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 36 毫秒
1.
Simulation of a Summer Urban Breeze Over Paris   总被引:4,自引:0,他引:4  
Numerical simulations for an anticyclonic summer episode in the Paris area have been performed at the meso- scale for a 48-hour period, and compared to observations from a dense operational observational network. The meteorological stations have been classified, according to the extent of urbanization of their surroundings, into four classes (central Paris, urban, suburban, and rural). The atmospheric model, coupled with an urban surface scheme, correctly reproduces the temperature (within 1 K from the observations) and humidity. The intense urban heat island during the night is also well represented.Following the validation, the model is used to quantify atmospheric effects of Paris on the boundary layer, through a comparison with a purely rural simulation. At night, the model simulates a neutral or even slightly unstable boundary layer to a depth of 200 m over the city. In contrast, a very stable layer formed in the countryside. During the day, the boundary layer was more turbulent and 500 m deeper over Paris; vertical velocities of up to 1 m s-1 were created over the city. This leads to an urban breeze with convergence at low levels (with winds around 5 to 7 m s-1), and divergence at the boundary-layer top (with similar wind speeds). The horizontal extent of the breeze reaches for more than 50 km from the city centre, and could have an important impact on pollutant diffusion in the area for calm days.Finally, three other spring cases are presented briefly. These show that an urban breeze develops if the synoptic wind is weak enough or disorganized; an urban plume develops otherwise.  相似文献   

2.
The relative roles of land-use and orography on the meteorological fields in the Paris area are studied by means of numerical simulations of two Special Observing Periods (SOP), of the ECLAP experiment. Sensitivity experiments have been performed with flat orography to investigate the strength of the urban effects, and with a uniform land-use surface to replace the surface heterogeneities, to isolate the orographic forcing. Comparisons of the simulated fields with a reference simulation including all forcing are analysed. It is found that during these two SOP of spring-time conditions, despite the low terrain elevation, the orographic effect is the main forcing of the dynamic field but that although the land use is the dominant factor reproducing the thermal evolution of the boundary layer, the orography alone also plays a role in the temperature pattern with slope flows in and out of the Paris basin.  相似文献   

3.
4.
We explore the ability of a simple urban surface parametrization, embedded in a mesoscale meteorological model, to correctly reproduce observed values of the urban heat island (UHI) intensity, which is defined as the urban-rural surface air temperature difference. To do so, a simple urban scheme was incorporated into the Advanced Regional Prediction System (ARPS). Subsequently, a simulation was performed with the coupled model over the wider area of Paris, for a 12-day period in June 2006 that was characterised by conditions prone to UHI development. Simulated 2-m air temperature was compared with observed values for urban and rural stations, yielding mean errors of 1.4 and 1.5 K, respectively. More importantly, it was found that the model also displayed an overall good capability of reproducing the observed temperature differences. In particular, the magnitude (up to 6 K) and timing of the diurnal cycle of the UHI intensity was simulated well, the model exhibiting a mean error of 1.15 K. As a result, our conclusion is that the ARPS model, extended with simple urban surface physics, is able to capture observed urban-rural air temperature differences well, at least for the domain and period studied.  相似文献   

5.
应用城市冠层模式研究建筑物形态对城市边界层的影响   总被引:5,自引:1,他引:4  
文中将城市冠层模式耦合到南京大学城市尺度边界层模式中,通过模拟对比发现,耦合模式对城市地区气温模拟结果更接近于观测值,尤其是对城市地区夜间气温模拟的改进.运用改进耦合模式通过多个敏感性试验的模拟,从城市面积扩张、建筑物高度增加、建筑物分布密度变化等角度研究城市建筑物三维几何形态变化对城市边界层及城市气象环境的影响,试验结果表明:(1)城市面积扩张使得城市下垫面的热通量增大,热力湍流活动增强,动量通量输送增强,城市湍能增大,湍流扩散系数变大,城市气温升高,且对不同时刻城市区域大气层结稳定度均有不同程度的影响.(2)建筑物高度增加增大了城市下垫面的粗糙度和零平面位移.同时也增大了城市街渠高宽比.城市建筑物越高,白天城市地区地表热通量越小,城市上空大气温度越低,平均风速减小,湍能减小;夜间由于高大建筑物释放储热比低矮建筑物要多,其热力湍流相对活跃,地表热通量增大,使得城市区域气温较高.(3)建筑物密度增大,会减小城市下垫面的粗糙度同时增强街渠对辐射的影响.建筑物密度增大在白天会减小地表热通量和动量通量,使城市气温降低,平均风速增大,城市湍流活动能力减弱;夜间城市释放较多储热使得气温较高.  相似文献   

6.
Accurate simulation of air quality at neighbourhood scales (on order of 1-km horizontal grid spacing) requires detailed meteorological fields inside the roughness sub-layer (RSL). Since the assumptions of the roughness approach, used by most of the mesoscale models, are unsatisfactory at this scale, a detailed urban and rural canopy parameterisation, called DA-SM2-U, is developed inside the Penn State/NCAR Mesoscale Model (MM5) to simulate the meteorological fields within and above the urban and rural canopies. DA-SM2-U uses the drag-force approach to represent the dynamic and turbulent effects of the buildings and vegetation, and a modified version of the soil model SM2-U, called SM2-U(3D), to represent the thermodynamic effects of the canopy elements. The turbulence length scale is also modified inside the canopies. SM2-U(3D) assesses the sensible and latent heat fluxes from rural and urban surfaces in each of the computational layers inside the canopies by considering the shadowing effect, the radiative trapping by the street canyons, and the storage heat flux by the artificial surfaces. DA-SM2-U is tested during one simulated day above the city of Philadelphia, U.S.A. It is shown that DA-SM2-U is capable of simulating the important features observed in the urban and rural RSL, as seen in the vertical profiles of the shear stress, turbulent kinetic energy budget components, eddy diffusivity, potential air temperature, and specific humidity. Within the canopies, DA-SM2-U simulates the decrease of the wind speed inside the dense canopies, the skirting of the flow around the canopy blocks, warmer air inside the vegetation canopy than above open areas during the night and conversely during the day, and constantly warmer air inside the urban canopy. The comparison with measurements shows that the surface air temperature above rural and urban areas is better simulated by DA-SM2-U than by the `standard version' of MM5.  相似文献   

7.
An urban canopy model is developed for use in mesoscale meteorological and environmental modelling. The urban geometry is composed of simple homogeneous buildings characterized by the canyon aspect ratio (h/w) as well as the canyon vegetation characterized by the leaf aspect ratio (σ l ) and leaf area density profile. Five energy exchanging surfaces (roof, wall, road, leaf, soil) are considered in the model, and energy conservation relations are applied to each component. In addition, the temperature and specific humidity of canopy air are predicted without the assumption of thermal equilibrium. For radiative transfer within the canyon, multiple reflections for shortwave radiation and one reflection for longwave radiation are considered, while the shadowing and absorption of radiation due to the canyon vegetation are computed by using the transmissivity and the leaf area density profile function. The model is evaluated using field measurements in Vancouver, British Columbia and Marseille, France. Results show that the model quite well simulates the observations of surface temperatures, canopy air temperature and specific humidity, momentum flux, net radiation, and energy partitioning into turbulent fluxes and storage heat flux. Sensitivity tests show that the canyon vegetation has a large influence not only on surface temperatures but also on the partitioning of sensible and latent heat fluxes. In addition, the surface energy balance can be affected by soil moisture content and leaf area index as well as the fraction of vegetation. These results suggest that a proper parameterization of the canyon vegetation is prerequisite for urban modelling.  相似文献   

8.
MM5模式中城市冠层参数化方案的设计及其数值试验   总被引:15,自引:5,他引:15  
文中在综合国外一些较先进的中尺度模式城市作用参数化方案的基础上 ,从城市下垫面结构对城市边界层大气作用的物理机制及实际应用两方面出发 ,对城市下垫面结构和人为活动等因素对边界层结构的影响及中尺度模式中城市化作用的合理体现等问题进行了较全面的考虑 ,改进和设计出能够较全面、细致地描述城市结构对大气边界层动力、热力结构的影响 ,且适合中尺度模式结构特点的城市冠层参数化方案 (UCP) ,并实现了其与MM5模式的耦合。进行了耦合后的UCP方案及采用原城市作用方案的MM5模式对BECAPEX试验期间北京地区气象条件多重嵌套细尺度进行了模拟试验 ,并与观测结果对比 ,结果表明 :相比于MM 5模式中原有表示城市作用的参数化方案来讲 ,设计的UCP方案在很大程度上提高了MM 5模式对城市边界层热力和动力结构的模拟能力。  相似文献   

9.
The urban impact on the sea breeze is studied by means of a mesoscale model with a detailed urban parameterisation. Four simulations are carried out on an idealised two-dimensional flat domain. In the base case, half of the domain is characterised by seaand the other half by rural land. In the urban case, an urban area 10 km wide is added near the shoreline. Simulations are performed for a moist rural soil (weak sea breeze) and for a dry rural soil (strong sea breeze). Results are analysed in order to evaluate the impact of the city on the wind, temperature and turbulent kinetic energy fields. The dispersion of a passive tracer emitted near the coastline is, also, used in the comparison. Results show that the city accelerates the sea-breeze formation in the morning (combinations of urban circulation and sea breeze), but it slows thesea-breeze front penetration. Moreover, the presence of the city enhances the recirculation processes and strongly modifies the pollutant dispersion. These effects are enhanced for a moist rural soil.  相似文献   

10.
The spatial variation of the nocturnal urban boundary-layer structure is described and the time variation of the mixing height, and the nocturnal inversion top and strength after sunrise is presented for urban sites located upwind, downwind, and near the center of the heat island, and at an upwind rural site. Observations were derived from high resolution temperature profiles obtained by a helicopter during 35 intensive morning experiments in St. Louis, Missouri.The nocturnal urban boundary layer increased in depth from the upwind edge of the urban area. Far downwind, in suburban and rural areas, a remnant of the urban boundary layer existed between a stable surface-based layer and an upper inversion that resembled the upwind rural inversion.The mixing height (base of the inversion) evolved in a parabolic manner after sunrise at the urban locations. A rise in the inversion top after sunrise at the urban locations is believed to be due to low-level convergence which caused the entire inversion layer to be lifted. Due to large horizontal temperature gradients associated with the urban heat island, cold air advection tended to counteract the urban-induced lifting effect by inhibiting mixing-height growth at urban locations upwind of the heat-island center. Advection also caused the maximum height and fastest growth rate of the urban mixed layer to be shifted downwind of the urban area with time. However, mean mixing-height growth rates at various urban locations did not differ significantly. The rural mixing-height growth rate was about twice as large as urban values for up to 3 hr after sunrise. Spatial differences in the mixing height became small near the time of inversion dissipation, which appeared to occur at about the same time at all locations.On assignment from the National Oceanic and Atmospheric Administration, U.S. Department of Commerce.  相似文献   

11.
A Physically-Based Scheme For The Urban Energy Budget In Atmospheric Models   总被引:28,自引:1,他引:27  
An urban surface scheme for atmospheric mesoscale models ispresented. A generalization of local canyon geometry isdefined instead of the usual bare soil formulation currently usedto represent cities in atmospheric models. This allows refinement ofthe radiative budgets as well as momentum, turbulent heat and ground fluxes.The scheme is aimed to be as general as possible, in order to representany city in the world, for any time or weather condition(heat island cooling by night, urban wake, water evaporation after rainfalland snow effects).Two main parts of the scheme are validated against published data.Firstly, it is shown that the evolution of the model-predictedfluxes during a night with calm winds is satisfactory, considering both the longwave budget and the surface temperatures. Secondly, the original shortwave scheme is tested off-line and compared to the effective albedoof a canyon scale model. These two validations show that the radiative energy input to the urban surface model is realistic.Sensitivity tests of the model are performed for one-yearsimulation periods, for both oceanic and continental climates. The scheme has the ability to retrieve, without ad hoc assumptions, the diurnal hysteresis between the turbulent heat flux and ground heat flux. It reproduces the damping of the daytime turbulent heat flux by the heat storage flux observed in city centres. The latent heat flux is negligible on average,but can be large when short time scales are considered (especially afterrainfall). It also suggests that in densely built areas, domesticheating can overwhelm the net radiation, and supply a continuous turbulentheat flux towards the atmosphere. This becomes very important inwinter for continental climates. Finally, a comparison with a vegetation scheme shows that the suburban environment can be represented with a bare soil formulation for large temporal or spatial averages (typical of globalclimatic studies), but that a surface scheme dedicated to the urban surface is necessary when smaller scales are considered: town meteorological forecasts, mesoscale or local studies.  相似文献   

12.
Profiles of velocity variances based on observations in flat rural areas are well established, and are used for modelling turbulent dispersion in all types of regions including those of complex terrain and urban areas. Surface-based and balloon observations are used to assess the profiles in both rural and urban areas. It is shown that, with good meteorological inputs for the locality of friction velocity and surface sensible heat flux, the profiles are equally well suited to urban areas. The sensitivity of the profiles to the input meteorological data, in particular using numerical weather prediction (NWP) data, is discussed. This highlights the limitations of NWP data for dispersion modelling and stresses the importance of schemes for modelling urban meteorology.The British Crowns right to retain a non-exclusive royalty-free license in and to any copyright is acknowledged.  相似文献   

13.
苏州夏季城市热岛现状及影响因子分析研究   总被引:9,自引:4,他引:5  
利用2007年夏季常规和自动站气象观测资料,分析研究苏州城市热岛及其与影响因子关系.气温分布表明,市中心干将桥气温相对较高,而靠近太湖的新区镇湖镇、东山等郊区气温相对较低.苏州城市热岛强度日变化呈现双峰分布,两个峰值分别出现在10时和20时左右,最低值出现在16时左右.热岛强度与气象条件关系分析表明:(1)热岛强度受云量的影响较大;(2)与城区气温分布关系密切,相关系数为0.62;(3)与风向有关,城区风向为西风时的热岛强度大于东风时热岛强度;而城区热岛强度与风速关系不明显.另外相关站点的合理选取对城市热岛研究也十分重要.  相似文献   

14.
The accurate determination of surface-layer turbulent fluxes over urban areas is critical to understanding urban boundary layer (UBL) evolution. In this study, a remote-sensing technique using a large aperture scintillometer (LAS) was investigated to estimate surface-layer turbulent fluxes over a highly heterogeneous urban area. The LAS system, with an optical path length of 2.1 km, was deployed in an urban area characterized by a complicated land-use mix (residential houses, water body, bare ground, etc.). The turbulent sensible heat (Q H) and momentum fluxes (τ) were estimated from the scintillation measurements obtained from the LAS system during the cold season. Three-dimensional LAS footprint modeling was introduced to identify the source areas ("footprint") of the estimated turbulent fluxes. The analysis results showed that the LAS-derived turbulent fluxes for the highly heterogeneous urban area revealed reasonable temporal variation during daytime on clear days, in comparison to the land-surface process-resolving numerical modeling. A series of sensitivity tests indicated that the overall uncertainty in the LAS-derived daytime Q H was within 20%-30% in terms of the influence of input parameters and the non-dimensional similarity function for the temperature structure function parameter, while the estimation errors in τ were less sensitive to the factors of influence, except aerodynamic roughness length. The 3D LAS footprint modeling characterized the source areas of the LAS-derived turbulent fluxes in the heterogeneous urban area, revealing that the representative spatial scales of the LAS system deployed with the 2.1 km optical path distance ranged from 0.2 to 2 km2 (a "micro-α scale"), depending on local meteorological conditions.  相似文献   

15.
应用卫星资料分析苏州夏季城市热岛效应   总被引:5,自引:3,他引:2  
朱焱  朱莲芳 《气象科学》2009,29(1):77-83
利用苏州2004-2007年自动气象站资料以及购自中国科学院对地观测与数字地球科学中心的Landsat 5卫星(25 m分辨率)资料,分析研究苏州地区城市热岛总体特点以及分布规律,并对可能变化做一些探讨.分析认为,由于城市热岛效应,苏州地区气温呈中间高两侧低的分布特征,气温高值中心呈西北-东南走向,沿太湖及沿江地区气温相对较低;苏州城市地表温度呈明显的放射型分布,以市区中心向四周呈放射状分布.  相似文献   

16.
The influence of mesoscale circulations induced by urban-rural differential surface sensible heat flux and roughness on convective boundary-layer (CBL) flow statistics over an isolated urban area has been examined using large-eddy simulation (LES). Results are analyzed when the circulations influence the entire urban area under a zero background wind. For comparison, the CBL flow over an infinite urban area with identical urban surface characteristics under the same background meteorological conditions is generated as a control case (without circulations). The turbulent flow over the isolated urban area exhibits a mix of streaky structure and cellular pattern, while the cellular pattern dominates in the control case. The mixed-layer height varies significantly over the isolated urban area, and can be lower near the edge of the urban area than over the rural area. The vertical profiles of turbulence statistics over the isolated urban area vary horizontally and are dramatically different from the control case. The turbulent kinetic energy (TKE) sources include wind shear, convergence, and buoyancy productions, compared to only buoyancy production in the control case. The normalized vertical velocity variance is reduced compared to the control case except in the central urban area where it is little affected. The low-level flow convergence is mainly responsible for the enhanced horizontal velocity variance in the central urban area, while wind shear is responsible for the additional local maximum of the horizontal velocity variance near the middle of the CBL outside the central area. Parameterizations in the prognostic equation for TKE used in mesoscale models are evaluated against the LES results over the isolated urban area. We also discuss conditions under which the urban-induced circulations occur and when they may affect the entire urban area. Given that urban-induced circulations can influence the entire urban area within hours for an urban area of a realistic size, it is inappropriate to directly apply empirical relations of turbulence statistics derived under horizontally-homogenous flow conditions to an urban area.  相似文献   

17.
北京冬季城市边界层结构形成机制的初步数值研究   总被引:7,自引:1,他引:6  
利用耦合了城市冠层参数化方案的MM5模式对2001年冬季北京地区一次典型的城市边界层过程进行成功模拟的基础上,对北京城市化作用、周边地形以及城市化进程发展对城市边界层结构的影响等问题进行了一系列的数值模拟试验。城市化作用的因子分离试验发现,城市化的总体作用即城市下垫面结构对大气热力及动力的综合影响导致了北京冬季城市边界层结构主要特征的形成。此外,揭示了城市结构的不同影响因子———动力因子、热力因子和热动力因子间的相互作用在北京冬季城市边界层结构形成和演变过程中的不同作用。在夜间,城市结构的动力因子对于城市边界层主要特征如市区悬浮逆温、近地层中小的风速及较强的湍流动能等的形成起着主导作用;在白天,城市结构的热力因子则成为影响市区混合层强度以及湍流运动特征等边界层结构的主导因素;热、动力因子间的相互作用对城市边界层结构的形成和演变也有着重要作用,但其影响特征比较复杂。北京周边地形作用的敏感性试验的结果表明,北京周边的特殊地形条件对城市边界层热力结构特征如悬浮逆温层及城市热岛等的结构及分布特征的形成也有着明显的影响,使其具有特殊的局地化特征,同时,它也是北京地区近地层主要气流特征的强迫源。不同城市化程度的敏感性试验结果揭示,随着北京城市建筑高度和密度的增加,市区风速将减小、湍流动能将加强,夜间城市悬浮逆温层底的高度会有所提高,城市热岛的强度也将加强,并可能在白天出现比较明显的城市热岛效应。  相似文献   

18.
北京地区城郊极端温度事件的变化趋势及差异分析   总被引:1,自引:0,他引:1  
利用北京地区城郊16个气象观测站1979~2008年逐日平均、最高和最低温度的均一化资料,分析了近30年北京地区城、郊区极端温度事件发生频次(强度)的变化趋势,并对比了城郊差异以及城市热岛强度对城郊差异的影响.研究结果显示:从发生频次来看,近30年城区极端低温事件的减小幅度[5.94 d (10 a)-1]高于郊区的减小幅度[-5.28 d (10 a)-1],而极端高温事件的增加幅度在城区[4.33 d (10 a)-1]和郊区[4.42 d (10 a)-1]之间差别不大,定量化的诊断结果进一步证明了城区和郊区在极端温度事件发生频次上的差别很小.从发生强度来看,近30年城区极端温度事件的年平均发生强度明显高于郊区,但在变化趋势上,城区极端低温事件的减弱幅度略高于极端高温事件的增强幅度,相差0.042℃(10 a)-1,而在郊区极端低温事件的减弱幅度却略低于极端高温事件的增强幅度,相差0.052℃(10 a)-1.城郊差异的定量化分析结果表明,极端温度事件在城区强度一般大于郊区强度,城区与郊区强度差值均为正值(除1982年和1985年极端高温事件强度差值为负).热岛强度与极端温度事件城郊差异的相关性统计发现,极端温度事件发生频次和发生强度在城郊之间的差别与热岛强度均没有明显的相关特征,该结果说明城市热岛效应对北京超大城市市区和郊区影响基本一致,其差异性是有限的.  相似文献   

19.
The specific problems of determining and simulating the surface energy balance (SEB) and the mixing height (MH) over urban areas are examined. The SEB and MH are critical components of algorithms and numerical models for the urban boundary layer, though the constituent parts of the SEB and the MH are not routinely measured by national weather services. Parameterisations are thus needed in applications. In this investigation, several recently developed algorithms and models for estimating the SEB and MH were applied to new datasets and assessed. Results are discussed in terms of the need for spatial resolution and the parameters needed to describe the urban atmosphere. Limitations of models are identified and recommendations for further development and observations are given. Having identified gaps in knowledge, key findings from new urban experiments and numerical modelling for the SEB and MH are given. The diurnal cycle for the SEB is significantly different from rural conditions—urban heat storage is needed in urban parameterisations. The urban MH is increased over the rural MH, as shown by several numerical schemes and careful sodar analyses. This work has been carried out within the COST-715 Action “Meteorology applied to urban air pollution problems (1998–2004). COST 715 reached a consensus proposing representatively sited measurements of meteorological parameters and turbulent fluxes above roof-tops, and recognised that such data are needed to improve numerical models of the urban surface processes.  相似文献   

20.
周志恩  蒋维楣  胡非  奚文 《气象科学》2003,23(3):292-299
目前 ,我国气象部门相当普遍地拥有气象卫星观测资料 ,但是 ,这些资料如何在城市气象服务以及为城市建设规划等方面的决策研究中发挥作用 ,急待进一步研究并开展工作。本文试图通过合理的反演处理 ,给出卫星观测对地面温度的测量结果 ,由此可比较细致地分析了解地面热状况及其与土地利用类型 ,地面覆盖性质等的关系。本文利用有限的 NOAA- AVHRR气象卫星遥感资料 ,采用修正的 Ulivieri分裂窗方法反演出同期的地表温度场 ,通过对北京地区的卫星观测资料进行算例分析 ,揭示出一个 2 0 0 km× 2 0 0 km范围内的地面温度分布特征。反演结果可以明显地揭示出城市热岛现象的变化规律 ,并且能较为清楚地反映出相对的高温区和低温区  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号