首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Fluid inclusions were investigated in successive generations of quartz-calcite boudins and veins in the vicinity of, and within, the low-angle detachment fault (of Early Miocene age) exposed on Tinos Island (Cyclades, Greece). Abundant boudins, veins, tension gashes and mineral segregations were formed during various stages of ductile and brittle shear along the detachment indicating fluid flow at various crustal levels, assisted motion and slip along the detachment. Three generations of fluid inclusions were identified: (1) syn-deformation aqueous inclusions; (2) local- late-deformation H2O-CO2 inclusions; (3) post-slip deformation, partly decrepitated aqueous and H2O-CO2 inclusions. The conditions of inclusion trapping correspond to the greenschist facies, at temperatures between 300 and 450°C and pressures in the range of 1.5–4.0 kb. A gradient of pressure of about 0.5 kb from the fault zone to the rocks of upper and lower plates is suggested. The results indicate that the syn-deformation fluid was NaCl-KCl-sulfate-dominated with a salinity of about 5 wt% NaCl equiv. Downward infiltration of meteoric water is a suitable source for this fluid. During the late stage of fault activity, in the brittle field, fluid was of H2O-CO2 composition. Very rapid exhumation of the entire section (unrelated to motion on the investigated fault) is marked by numerous decrepitation clusters of the fluid inclusions.  相似文献   

2.
The Larafella Au-prospect (Burkina Faso) lies within dacitic rocks of the Palaeoproterozoic Birimian greenstone belts. Gold mineralization is intimately associated with zones of cataclastic deformation. Whilst the lode-vein mineralization is closely associated with CO2-rich fluid inclusions, the barren quartz veins are characterized by H2O ± salt-bearing inclusions. Geochemical studies on the immediate wall-rock of the quartz veins have shown an increase of As in zones of gold enrichment, while alteration overprints such as carbonatization and chloritization cannot be correlated unequivocally with Au-mineralization. Consequently, fluid inclusion studies of quartz veins and As-anomalies constitute important exploration tools for mesothermal gold mineralization, since Au-rich zones can be distinguished from Au-depleted zones.  相似文献   

3.
The Bangbu gold deposit is a large orogenic gold deposit in Tibet formed during the AlpineHimalayan collision. Ore bodies(auriferous quartz veins) are controlled by the E-W-trending Qusong-Cuogu-Zhemulang brittle-ductile shear zone. Quartz veins at the deposit can be divided into three types: pre-metallogenic hook-like quartz veins, metallogenic auriferous quartz veins, and postmetallogenic N-S quartz veins. Four stages of mineralization in the auriferous quartz veins have been identified:(1) Stage S1 quartz+coarse-grained sulfides,(2) Stage S2 gold+fine-grained sulfides,(3) Stage S3 quartz+carbonates, and(4) Stage S4 quartz+ greigite. Fluid inclusions indicate the oreforming fluid was CO_2-N_2-CH_4 rich with homogenization temperatures of 170–261°C, salinities 4.34–7.45 wt% Na Cl equivalent. δ~(18)Ofluid(3.98‰–7.18‰) and low δDV-SMOW(-90‰ to-44‰) for auriferous quartz veins suggest ore-forming fluids were mainly metamorphic in origin, with some addition of organic matter. Quartz vein pyrite has δ~(34)SV-CDT values of 1.2‰–3.6‰(an average of 2.2‰), whereas pyrite from phyllite has δ~(34)SV-CDT 5.7‰–9.9‰(an average of 7.4‰). Quartz vein pyrites yield 206Pb/204 Pb ratios of 18.662–18.764, 207Pb/204 Pb 15.650–15.683, and ~(208)Pb/204 Pb 38.901–39.079. These isotopic data indicate Bangbu ore-forming materials were probably derived from the Langjiexue accretionary wedge. 40Ar/39 Ar ages for sericite from auriferous sulfide-quartz veins yield a plateau age of 49.52 ± 0.52 Ma, an isochron age of 50.3 ± 0.31 Ma, suggesting that auriferous veins were formed during the main collisional period of the Tibet-Himalayan orogen(~65–41 Ma).  相似文献   

4.
Fluid inclusions were studied in samples from the Ashanti, Konongo-Southern Cross, Prestea, Abosso/Damang and Ayanfuri gold deposits in the Ashanti Belt, Ghana. Primary fluid inclusions in quartz from mineralised veins of the Ashanti, Prestea, Konongo-Southern Cross, and Abosso/Damang deposits contain almost exclusively volatile species. The primary setting of the gaseous (i.e. the fluid components CO2, CH4 and N2) fluid inclusions in clusters and intragranular trails suggests that they represent the mineralising fluids. Microthermometric and Raman spectroscopic analyses of the inclusions revealed a CO2 dominated fluid with variable contents of N2 and traces of CH4. Water content of most inclusions is below the detection limits of the respective methods used. Aqueous inclusions are rare in all samples with the exception of those from the granite-hosted Ayanfuri mineralisation. Here inclusions associated with the gold mineralisation contain a low salinity (<6 eq.wt.% NaCl) aqueous solution with variable quantities of CO2. Microthermometric investigations revealed densities of the gaseous inclusions of 0.65 to 1.06 g/cm3 at Ashanti, 0.85 to 0.98 g/cm3 at Prestea, up to 1.02 g/cm3 at Konongo-Southern Cross, and 0.8 to 1.0 g/cm3 at Abosso/Damang. The fluid inclusion data are used to outline the PT ranges of gold mineralisation of the respective gold deposits. The high density gaseous inclusions found in the auriferous quartz at Ashanti and Prestea imply rather high pressure trapping conditions of up to 5.4 kbar. In contrast, mineralisation at Ayanfuri and Abosso/Damang is inferred to have occurred at lower pressures of only up to 2.2 kbar. Mesothermal gold mineralisation is generally regarded to have formed from fluids characterized by H2O > CO2 and low salinity ( ±  6 eq.wt.%NaCl). However, fluid inclusions in quartz from the gold mineralisations in the Ashanti belt point to distinctly different fluid compositions. Specifically, the predominance of CO2 and CO2 >> H2O have to be emphasized. Fluid systems with this unique bulk composition were apparently active over more than 200␣km along strike of the Ashanti belt. Fluids rich in CO2 may present a hitherto unrecognised new category of ore-forming fluids. Received: 30 May 1996 / Accepted: 8 October 1996  相似文献   

5.
以南天山中段萨恨托亥-大山口成矿带内控矿韧性剪切带为例,对韧性剪切带的金成矿作用进行了初步探讨.通过对地质体的构造变形特点、变形演化过程的分析表明,韧性剪切带的构造属性控制了金矿的产状及规模,金矿化阶段与韧性剪切带的变形演化过程密切相关.矿化类型、矿化强度及矿化方式受韧性剪切带发展阶段制约,剪切带内物质组分迁移变化揭示出韧性剪切带与金在剪切带内的迁移富集、沉淀成矿的内在联系.韧性剪切带成矿作用是南天山成矿带中段重要的金矿成矿作用.  相似文献   

6.
The small Pirilä gold deposit, which is located in the southeastern part of the Svecofennian complex near the Archean/Proterozoic boundary, is hosted by quartz veins and lenses occurring in mica schist. The rocks of the area were metamorphosed under conditions of amphibolite facies. Gold is invariably associated with sulphides. Microthermometry of fluid inclusions in quartz indicates four types of inclusions: (1) weakly saline H2O-CO2 (< 4.0 eq.wt% NaCl) with small amounts of CH4 (< 10 mole% CH4); (2) CO2 (< 10 mole% CH4); (3) CH4; and (4) H2O (< 25 eq.wt% NaCl) with less than 0.85 mole% CO2 in the vapour phase. Texturally these inclusion types are classified as primary (H2O-CO2) and secondary (H2O, CO2 and CH4). Leachate analysis shows that, in addition to Na, the aqueous fluids contain Ca and Fe with minor amounts of K and Mg. The primary H2O-CO2 and the secondary H2O inclusions contain sulphide and unidentified opaque grains, respectively. The secondary CH4 inclusions are often associated with short trails of arsenopyrite grains. Fluid inclusion and geological data suggest ore mineral mobilization, crystallization of host quartz, and deposition of sulphides controlled by the D2 and D3 structures in the presence of a H2O-CO2 fluid mainly during the plastic D3 deformation and during the amphibolite facies metamorphism (i.e. 3.4 kbars/540–670°C). During ductile-brittle deformation (probably D4), precipitation of tectonic remobilized gold from sulphides in fractures occurred in the presence of CH4 and H2O fluids at lowered temperature (< 440°C) and pressure (< 2 kbars).  相似文献   

7.
The Tirek gold deposit hosted in the Archean shield is one of the richest sources of mined gold for Algeria. The deposit is controlled by the East Ouzzal shear zone (EOSZ), a transcurrent N–S lithospheric fault. The EOSZ is a late Pan-African dextral-ductile shear zone separating two contrasting Precambrian domains: the Archean In Ouzzal block to the west (Orthogenesis with subordinate metasediments reworked and granulitized during the ca. 2 Ga Eburnean event) and a middle Proterozoic block to the east involved in the ca. 600 Ma Pan-African event. The auriferous quartz veins are mainly oriented in two directions, N–S veins hosted in mylonitic rocks and NE–SW veins hosted in gabbroic or gneissic bands. The NE–SW veins contain the richest ore. Gold ore is found in a system of veins and lenticular quartz veinlets arranged in anastomosing networks. The hydrothermal alteration associated with these veins is characteristically a carbonate-sericite-albite-pyrite assemblage. Gold is the main metal of economic importance; it is disseminated in the quartz as grains or fibers along microcracks and as microscopic grains in the host rocks. Microthermometric results and Raman laser data from fluid inclusions demonstrate that the ore-forming fluids contained H2O-CO2±CH4 and were low salinity. Homogenization temperatures are commonly 250–310 °C. In the Tirek deposit, the role of the shear zone that hosts the mineralization was to drain the hydrothermal fluid. Interactions between the fluid and the mafic host rocks and CO2 also contributed to the formation of the hydrothermal gold deposit at Tirek.  相似文献   

8.
The Junction gold deposit, in Western Australia, is an orogenic gold deposit hosted by a differentiated, iron‐rich, tholeiitic dolerite sill. Petrographic, microthermometric and laser Raman microprobe analyses of fluid inclusions from the Junction deposit indicate that three different vein systems formed at three distinct periods of geological time, and host four fluid‐inclusion populations with a wide range of compositions in the H2O–CO2–CH4–NaCl ± CaCl2 system. Pre‐shearing, pre‐gold, molybdenite‐bearing quartz veins host fluid inclusions that are characterised by relatively consistent phase ratios comprising H2O–CO2–CH4 ± halite. Microthermometry suggests that these veins precipitated when a highly saline, >340°C fluid mixed with a less saline ≥150°C fluid. The syn‐gold mineralisation event is hosted within the Junction shear zone and is associated with extensive quartz‐calcite ± albite ± chlorite ± pyrrhotite veining. Fluid‐inclusion analyses indicate that gold deposition occurred during the unmixing of a 400°C, moderately saline, H2O–CO2 ± CH4 fluid at pressures between 70 MPa and 440 MPa. Post‐gold quartz‐calcite‐biotite‐pyrrhotite veins occupy normal fault sets that slightly offset the Junction shear zone. Fluid inclusions in these veins are predominantly vapour rich, with CO2?CH4. Homogenisation temperatures indicate that the post‐gold quartz veins precipitated from a 310 ± 30°C fluid. Finally, late secondary fluid inclusions show that a <200°C, highly saline, H2O–CaCl2–NaCl–bearing fluid percolated along microfractures late in the deposit's history, but did not form any notable vein type. Raman spectroscopy supports the microthermometric data and reveals that CH4–bearing fluid inclusions occur in syn‐gold quartz grains found almost exclusively at the vein margin, whereas CO2–bearing fluid inclusions occur in quartz grains that are found toward the centre of the veins. The zonation of CO2:CH4 ratios, with respect to the location of fluid inclusions within the syn‐gold quartz veins, suggest that the CH4 did not travel as part of the auriferous fluid. Fluid unmixing and post‐entrapment alteration of the syn‐gold fluid inclusions are known to have occurred, but cannot adequately account for the relatively ordered zonation of CO2:CH4 ratios. Instead, the late introduction of a CH4–rich fluid into the Junction shear zone appears more likely. Alternatively, the process of CO2 reduction to CH4 is a viable and plausible explanation that fits the available data. The CH4–bearing fluid inclusions occur almost exclusively at the margin of the syn‐gold quartz veins within the zone of high‐grade gold mineralisation because this is where all the criteria needed to reduce CO2 to CH4 were satisfied in the Junction deposit.  相似文献   

9.
The late Archaean (ca. 2.7 Ga) Ilomantsi greenstone belt hosts a large number of small mesozonal gold occurrences. The Rämepuro deposit is spatially related to a feldspar porphyry dyke which has intruded the contact between metagreywackes and intermediate metavolcanic rocks. It consists of gold-bearing quartz-tourmaline-sulphide veins located mainly within an intensively altered and sheared zone about 20-30 m in width. Two types of fluid inclusions were distinguished in the quartz veins: (1) H2O-CH4 (Й equiv. wt% NaCl), and (2) H2O-CO2 (⢬ equiv. wt% NaCl). The two compositionally different fluid-inclusion types occur in separate veins. The compositions of decrepitate residues indicate that the type 1 fluid inclusions consist predominantly of Na, S, Ca, Cl, and in lesser proportions of K and Fe. The residues of the type 2 fluid inclusions are dominated by Na, Ca, Cl and minor K. For the type 1 and type 2 fluid inclusions, microthermometric experiments indicate average homogenisation temperatures of 310-350 and 220-250 °C respectively. Both types of fluid inclusions contain 1-3 anisotropic solids (Ca/Mg carbonate?, nahcolite?, tourmaline?). Sulphide daughter minerals occur only in the type 1 fluid inclusions. This fluid type is also often associated with short trails of sulphide inclusions which suggest mobilisation and redistribution of ore constituents. Some type 1 fluid inclusions display distinct morphological features ("implosion textures") related to post-trapping re-equilibration. The presence of the fluid-inclusion re-equilibration textures in some auriferous quartz veins and their absence in other gold-bearing quartz veins suggest an age difference between them. This conclusion is also supported by the compositionally different fluid regimes associated with the different quartz veins, indicating a change from reducing (CH4) to a more oxidising (CO2) fluid environment. The fluid-inclusion evidence suggests two separate gold mineralisation events, one related to late Archaean regional metamorphism, the other to Palaeoproterozoic thrusting and metamorphism.  相似文献   

10.
The Red Lake greenstone belt is one of the foremost Au mining camps in Canada and hosts the world-class Campbell-Red Lake Au deposit. Belt-scale hydrothermal alteration is characterized by proximal ferroan dolomite zones associated with Au mineralization surrounded by distal calcite zones, both being accompanied by potassic alterations (sericite, muscovite, and biotite). At the Campbell-Red Lake and Cochenour deposits Au mineralization (in particular high-grade ore) is associated with silica and sulfides (especially arsenopyrite) that replace carbonate ± quartz veins and the host rocks. The prevalence of carbonic fluid inclusions and rare occurrence of aqueous-bearing inclusions in carbonate–quartz–Au veins in the Campbell-Red Lake deposit, and the consistency of homogenization temperatures of carbonic inclusions within individual fluid inclusion assemblages (FIA), have been interpreted to indicate that H2O-poor, CO2-dominated fluids were responsible for the carbonate veining and Au mineralization. Further studies of fluid inclusions in carbonate–quartz veins within and outside the deformation zone hosting the Campbell-Red Lake deposit (the Red Lake Mine trend) including the Cochenour Au deposit, the Redcon Au prospect, and outcrops in the distal calcite zone also reveal the dominance of carbonic fluid inclusions in vein minerals. These studies indicate that CO2-dominated fluids were flowing through fractures during carbonate vein formation and Au mineralization both within and outside major structures. The carbonic fluid may have been initially undersaturated with water, or it may have resulted from phase separation of an H2O–CO2–NaCl fluid. In the latter case, phase separation modeling indicates that the initial fluid likely had XCO2XCO2 values larger than 0.8. Calculations based on hydrothermal mineral assemblages indicate XCO2XCO2 values in the host rocks from 0.025 to 0.85, reflecting a change from CO2-dominated fluids in the fractures (veins) to H2O-dominated fluids in the host rocks away from the fractures. The CO2-dominated fluids were likely advected from granulite facies in the deeper crust, whereas the H2O-dominated fluids were derived from the ambient host rocks of amphibole to greenschist facies. Calculations based on CO2 requirements and source constraints indicate that the mineralizing fluids were likely two orders of magnitude more enriched in Au than the commonly assumed values of a few μg/L, which may explain why the Campbell-Red Lake deposit has a very high-grade of Au (average 21 g/t for the whole deposit and 81 g/t for the Goldcorp High-Grade zone). Fluid inclusion data suggest that the carbonate veining and Au mineralization likely took place at depths from 7 to 14 km. The development of crustiform–colloform structures in the carbonate ± quartz veins, which was previously interpreted to indicate relatively shallow environments, may alternatively have been related to extremely high fluid pressures and the CO2-dominated nature of the fluids, which could have enhanced the brittle properties of the rocks due to their high wetting angles.  相似文献   

11.
The Sawayaerdun gold deposit, located in Wuqia County, Southwest Tianshan, China, occurs in Upper Silurian and Lower Devonian low‐grade metamorphic carbonaceous turbidites. The orebodies are controlled by a series of NE‐NNE‐trending, brittle–ductile shear zones. Twenty‐four gold mineralized zones have been recognized in the Sawayaerdun ore deposit. Among these, the up to 4‐km‐long and 200‐m wide No. IV mineralized zone is economically the most important. The average gold grade is 1–6 g/t. Gold reserves of the Sawayaerdun deposit have been identified at approximately 37 tonnes and an inferred resource of 123 tonnes. Hydrothermal alteration is characterized by silicification, pyritization, arsenopyritization, sericitization, carbonatization and chloritization. On the basis of field evidence and petrographic analysis, five stages of vein emplacement and hydrothermal mineralization can be distinguished: stage 1, early quartz stage, characterized by the occurrence of quartz veins; stage 2, arsenopyrite–pyrite–quartz stage, characterized by the formation of auriferous quartz veinlets and stockworks; stage 3, polymetallic sulfide quartz stage, characterized by the presence of auriferous polymetallic sulfide quartz veinlets and stockworks; stage 4, antimony–quartz stage, characterized by the formation of stibnite–jamesonite quartz veins; and stage 5, quartz–carbonate vein stage. Stages 2 and 3 represent the main gold mineralization, with stage 4 representing a major antimony mineralization episode in the Sawayaerdun deposit. Two types of fluid inclusion, namely H2O–NaCl and H2O–CO2–NaCl types, have been recognized in quartz and calcite. Aqueous inclusions show a wide range of homogenization temperatures from 125 to 340°C, and can be correlated with the mineralization stage during which the inclusions formed. Similarly, salinities and densities of these fluids range for each stage of mineralization from 2.57 to 22 equivalent wt% NaCl and 0.76 to 1.05 g/cm3, respectively. The ore‐forming fluids thus are representative of a medium‐ to low‐temperature, low‐ to medium‐salinity H2O–NaCl–CO2–CH4–N2 system. The δ34SCDT values of sulfides associated with mineralization fall into a narrow range of ?3.0 to +2.6‰ with a mean of +0.1‰. The δ13CPDB values of dolomite and siderite from the Sawayaerdun gold deposit range from ?5.4 to ?0.6‰, possibly reflecting derivation of the carbonate carbon from a mixed magmatic/sedimentary source. Changes in physico‐chemical conditions and composition of the hydrothermal fluids, water–rock exchange and immiscibility of hydrothermal fluids are inferred to have played important roles in the ore‐forming process of the Sawayaerdun gold–antimony deposit.  相似文献   

12.
Fluid inclusions trapped in quartz veins hosted by a leucogneiss from the southern part of the Naxos Metamorphic Core Complex (Attic‐Cycladic‐Massif, Greece) were studied to determine the evolution of the fluid record of metamorphic rocks during their exhumation across the ductile/brittle transition. Three sets of quartz veins (V‐M2, V‐BD & V‐B) are distinguished. The V‐M2 and V‐BD are totally or, respectively, partially transposed into the foliation of the leucogneiss. They formed by hydrofracturing alternating with ductile deformation accommodated by crystal‐plastic deformation. The V‐B is discordant to the foliation and formed by fracturing during exhumation without subsequent ductile transposition. Fluids trapped during crystal–plastic deformation comprise two very distinct fluid types, namely a CO2‐rich fluid and a high‐salinity brine, that are interpreted to represent immiscible fluids generated from metamorphic reactions and the crystallization of magmas respectively. They were initially trapped at ～625 °C and 400 MPa and then remobilized during subsequent ductile deformation resulting in various degrees of mixing of the two end‐members with later trapping conditions of ～350 °C and 140 MPa. In contrast, brittle microcracks contain aqueous fluids trapped at 250 °C and 80 MPa. All veins display a similar δ13C pointing to carbon that was trapped at depth and then preserved in the fluid inclusions throughout the exhumation history. In contrast, the δD signature is marked by a drastic difference between (i) V‐M2 and V‐BD veins that are dominated by carbonic, aqueous‐carbonic and high‐salinity fluids of metamorphic and magmatic origin characterized by δD between ?56‰ and ?66‰, and (ii) V‐B veins that are dominated by aqueous fluids of meteoric origin characterized by δD between ?40‰ and ?46‰. The retrograde P–T pathway implies that the brittle/ductile transition separates two structurally, chemically and thermally distinct fluid reservoirs, namely (i) the ductile crust into which fluids originating from crystallizing magmas and fluids in equilibrium with metamorphic rocks circulate through a geothermal gradient of 30 °C km?1 at lithostatic pressure, and (ii) the brittle upper crust through which meteoric fluids percolate through a high geothermal gradient of 55 °C km?1 at hydrostatic pressure.  相似文献   

13.
The Eastern Desert of Egypt is well known as a gold-mining district since ancient times. Gold mineralization is closely associated with the granitic rocks in such way that the mineralization is either hosted by or occurs immediately adjacent to the granite intrusions. Granitic rocks accompanying gold mineralization in the Eastern Desert can be grouped into three categories i.e. syn-late tectonic calc-alkaline granites, calc-alkaline to mildly alkaline granites of the transitional stage and post-tectonic alkaline granites.Tectonically, gold mineralization is linked with the tectonothermal stages that were operative during the evolution of the Arabian–Nubian Shield (ANS). During the primitive stages of the island-arc formation, pre-orogenic gold mineralization (auriferous exhalites) was formed by hot brines accompanying submarine volcanic activity. No role for the granite is observed in this stage. Syn-orogenic gold mineralization (i.e. gold hosted in altered ophiolitic serpentinites along thrust faults and in sutures, quartz veins hosted in the metavolcano-sedimentary assemblage and/or the I-type granitic rocks surrounding them) connected with the collision and accretion stage is characterized by emplacement of calc-alkaline (I-type) older granite batholiths. Shear fractures reflected in brittle–ductile shear zones and amphibolite-green schist facies regional metamorphism were broadly contemporaneous with this intense compressional tectonic regime. Available fluid inclusion microthermometry and isotopic studies reveal that both metamorphic and magmatic fluids related to the syn-late tectonic calc-alkaline granites were operative. A further indication for the role of the granites is indicated by the presence of some concentrations of Antimony, Bismuth, Molybdenum, Tungsten, Rubidium, Beryllium, Tin, Yttrium, Ytterbium, Tantalum and Niobium in some auriferous quartz veins in the Egyptian gold mines.In the cratonal development of the (ANS), the land underwent a transitional stage between the major subduction-related calc-alkaline magmatic activity and the subsequent post-tectonic plutonism represented by the alkaline granites. This transitional stage is dominated by the eruption of Dokhan volcanics and deposition of molass-type Hammamat sediments. At ~ 590–530 Ma, the Arabian–Nubian Shield was deformed by post-accretionary structures, in the form of N-trending shortening zones such as the Hamisana shear zone and NW-trending strike-slip faults such as the Najd fault system. The regional NNW–SSE directed extension opened spaces that were progressively sealed with different magmatic phases including among them a considerable proportion of rocks referred to as “younger granites” in the Egyptian literature. Late-orogenic gold mineralization connected with the transitional stage is represented principally by the gold-bearing quartz veins traversing Hammamat molasse sediments, quartz veins traversing syn-extensional younger granites and generally quartz veins in ductile to brittle shears related to the Najd fault system and within Hamisana shear zone and its splays.By the end of Pan African orogeny until the Tertiary, the basement was intermittently intruded by a number of sub-alkaline to per alkaline granite bodies that host Mo, Sn, W, Nb–Ta and U mineralization in the Eastern Desert of Egypt. Anorogenic gold mineralization connected with post-orogenic granites is represented by small amounts of the element in disseminations, stockworks and quartz veins of Sn–W–Ta–U mineralization.The present review shows that gold mineralization in Egypt is an expression of two major cycles with distinct magmatic and tectonic characteristics, and the two cycles were separated by a transitional stage. The emplacement of granites in the compressional cycle played an important role in metamorphosing the country rocks by producing the heat energy required for the regional metamorphism and the providing of the magmatic fluids. The H2O–CO2 fluids enriched in volatiles were released at the greenschist–amphibolite facies transition at 450°–500 °C and mixed with the I-type calc-alkaline granite related fluids and both moved down a temperature gradient away from the amphibolite-green schist transition at depth to a lower temperature regime in the upper levels where it is deposited in brittle–ductile shear zones. With the extensional cycle, the syn-extensional granite intrusions acted as heat engine in such way that the heat of the granite drove the convective cells to circulate through the auriferous host-granite contacts, leaching gold and other elements and depositing it in structurally favorable sites. In addition, the contrasts in competency between the granites with brittle deformational characteristics and the surrounding country rocks with a ductile response to stress, led to a generation of extensive fracture pattern within the more competent unit.  相似文献   

14.
《Ore Geology Reviews》2009,35(4):580-596
The Semna gold deposit is one of several vein-type gold occurrences in the central Eastern Desert of Egypt, where gold-bearing quartz veins are confined to shear zones close to the boundaries of small granitoid stocks. The Semna gold deposit is related to a series of sub-parallel quartz veins along steeply dipping WNW-trending shear zones, which cut through tectonized metagabbro and granodiorite rocks. The orebodies exhibit a complex structure of massive and brecciated quartz consistent with a change of the paleostress field from tensional to simple shear regimes along the pre-existing fault segments. Textural, structural and mineralogical evidence, including open space structures, quartz stockwork and alteration assemblages, constrain on vein development during an active fault system. The ore mineral assemblage includes pyrite, chalcopyrite, subordinate arsenopyrite, galena, sphalerite and gold. Hydrothermal chlorite, carbonate, pyrite, chalcopyrite and kaolinite are dominant in the altered metaggabro; whereas, quartz, sericite, pyrite, kaolinite and alunite characterize the granodiorite rocks in the alteration zones. Mixtures of alunite, vuggy silica and disseminated sulfides occupy the interstitial open spaces, common at fracture intersections. Partial recrystallization has rendered the brecciation and open space textures suggesting that the auriferous quartz veins were formed at moderately shallow depths in the transition zone between mesothermal and epithermal veins.Petrographic and microthermometric studies aided recognition of CO2-rich, H2O-rich and mixed H2O–CO2 fluid inclusions in the gold-bearing quartz veins. The H2O–CO2 inclusions are dominant over the other two types and are characterized by variable vapor: liquid ratios. These inclusions are interpreted as products of partial mixing of two immiscible carbonic and aqueous fluids. The generally light δ34S of pyrite and chalcopyrite may suggest a magmatic source of sulfur. Spread in the final homogenization temperatures and bulk inclusion densities are likely due to trapping under pressure fluctuation through repeated fracture opening and sealing. Conditions of gold deposition are estimated on basis of the fluid inclusions and sulfur isotope data as 226–267 °C and 350–1100 bar, under conditions transitional between mesothermal and epithermal systems.The Semna gold deposit can be attributed to interplay of protracted volcanic activity (Dokhan Volcanics?), fluid mixing, wallrock sulfidation and a structural setting favoring gold deposition. Gold was transported as Au-bisulfide complexes under weak acid conditions concomitant with quartz–sericite–pyrite alteration, and precipitated through a decrease in gold solubility due to fluid cooling, mixing with meteoric waters and variations in pH and fO2.  相似文献   

15.
The Semna gold deposit is one of several vein-type gold occurrences in the central Eastern Desert of Egypt, where gold-bearing quartz veins are confined to shear zones close to the boundaries of small granitoid stocks. The Semna gold deposit is related to a series of sub-parallel quartz veins along steeply dipping WNW-trending shear zones, which cut through tectonized metagabbro and granodiorite rocks. The orebodies exhibit a complex structure of massive and brecciated quartz consistent with a change of the paleostress field from tensional to simple shear regimes along the pre-existing fault segments. Textural, structural and mineralogical evidence, including open space structures, quartz stockwork and alteration assemblages, constrain on vein development during an active fault system. The ore mineral assemblage includes pyrite, chalcopyrite, subordinate arsenopyrite, galena, sphalerite and gold. Hydrothermal chlorite, carbonate, pyrite, chalcopyrite and kaolinite are dominant in the altered metaggabro; whereas, quartz, sericite, pyrite, kaolinite and alunite characterize the granodiorite rocks in the alteration zones. Mixtures of alunite, vuggy silica and disseminated sulfides occupy the interstitial open spaces, common at fracture intersections. Partial recrystallization has rendered the brecciation and open space textures suggesting that the auriferous quartz veins were formed at moderately shallow depths in the transition zone between mesothermal and epithermal veins.Petrographic and microthermometric studies aided recognition of CO2-rich, H2O-rich and mixed H2O–CO2 fluid inclusions in the gold-bearing quartz veins. The H2O–CO2 inclusions are dominant over the other two types and are characterized by variable vapor: liquid ratios. These inclusions are interpreted as products of partial mixing of two immiscible carbonic and aqueous fluids. The generally light δ34S of pyrite and chalcopyrite may suggest a magmatic source of sulfur. Spread in the final homogenization temperatures and bulk inclusion densities are likely due to trapping under pressure fluctuation through repeated fracture opening and sealing. Conditions of gold deposition are estimated on basis of the fluid inclusions and sulfur isotope data as 226–267 °C and 350–1100 bar, under conditions transitional between mesothermal and epithermal systems.The Semna gold deposit can be attributed to interplay of protracted volcanic activity (Dokhan Volcanics?), fluid mixing, wallrock sulfidation and a structural setting favoring gold deposition. Gold was transported as Au-bisulfide complexes under weak acid conditions concomitant with quartz–sericite–pyrite alteration, and precipitated through a decrease in gold solubility due to fluid cooling, mixing with meteoric waters and variations in pH and fO2.  相似文献   

16.
Auriferous cherts in the Middle Carboniferous Jinchang Formation are the dominant host rocks of auriferous quartz veins and mixed orebodies comprised of gold-bearing quartz veins and cherts in the Mojiang gold deposit.The rocks exhibit sedimentary texture and structure and are composed of hot-water deposited minerals.The FeO,Fe2O3,Au and Ag contents of the auriferous cherts are high;the Cr,Ni and Co contents are also high but significantly variable;MnO/TiO2 and TFe/TiO2 ratios are relatively higy.As viewed from a few diagrams that distinguish different chert formations,the auriferous cherts are in or near the range of hot-water deposited cherts.Because the correlation coefficients between Au contents and those of Cr, Ni of the rocks are negative,a great Au amount in the cherts might not be brought about by later hydrothermal alterations.The rare-earth elements,O and Si isotopic compositions of the auriferous cherts demonstrate that the cherts belong to hot-water deposited rocks.The later hydrothermal alterations made the petrochemical compositions of the cherts deviate from the characteristics of hot-water deposition.In general,the geological and geochemical features of the auriferous cherts demonstrate that the rocks were formed by hot water deposition.  相似文献   

17.
Gold-bearing quartz lodes from the Egat gold mine, South Eastern Desert of Egypt, are associated with pervasively silicified, highly sheared ophiolitic metagabbro and island-arc metavolcanic rocks. The mineralized quartz veins and related alteration haloes are controlled by NNW-trending shear/fault zones. Microscopic and electron probe microanalyses (EPMA) data of the ore and gangue minerals reveal that fine-grained auriferous sulfarsenides represent early high-temperature (355–382 °C) phases, with formation conditions as (fS2?=??10, and fO2 around ?31). A late, low-temperature (302–333 °C) assemblage includes coarse pyrite, arsenopyrite, and free-milling gold grains (88–91 wt.% Au), with formation conditions as (fS2?=??8 and fO2 around ?30). Gold was impounded within early sulfarsenides, while free-milling gold blebs occur along microfractures in quartz veins and as inclusions in late sulfides. Infiltration of hydrothermal fluids under brittle–ductile shear conditions led to mobilization of refractory Au from early sulfarsenide phases and reprecipitated free gold, simultaneous with silicification of the host rocks. The positive correlation between Au and As favors and verifies the use of As as the best pathfinder for gold targets, along the NNW-trending shear zones.  相似文献   

18.
Gold mineralization of the Hutti mine, southern India, is situated in closely spaced laminated quartz veins and associated alteration haloes along steeply dipping shear zones within a sequence of rather uniform amphibolites. Intense shearing has resulted in large-scale mylonitization of the wall rocks. Anastomosing shear zones, with intervening lensoid bodies of unsheared amphibolites, are characteristic features of the deposit. The general pattern of symmetrical alteration comprises a distal zone of chlorite-rich rock, with a proximal biotite-rich zone adjacent to laminated quartz veins. Arsenopyrite thermometry yielded a temperature range of 350-477 °C for the biotite alteration zone, which preceded the formation of the laminated quartz veins. Mass balance calculations on the alteration zones indicate a gradual mass and volume loss during alteration. The alteration is accompanied by intense potash metasomatism and addition of sulfur, which resulted in the formation of arsenopyrite, pyrrhotite, and pyrite. Results of fluid inclusion studies suggest that low salinity (3.9-13.5 wt% NaCl equivalent) H2O-CO2 rich fluids were responsible for gold-rich laminated quartz vein formation in the Hutti deposit. These fluids constituted a later counterpart of the protracted fluid activity that first formed the biotite alteration zone. The estimated P-T values range from 1.0 to 1.7 kbar at 280-320 °C. These data, along with the alteration assemblages and the characteristic gold-sulfide association, both in the altered wall rock and laminated quartz veins, suggest that gold, transported as reduced bisulfide complexes, was deposited in response to sulfidation reactions in the wall rocks. Comparison of P-T conditions of formation of gold-quartz veins at Hutti with two other large gold deposits in the eastern Dharwar Craton, namely Kolar (1.8 kbar/280 °C) and western Ramagiri (1.45-1.7 kbar/240-270 °C), indicates broadly similar lode-gold forming conditions in the Dharwar Craton.  相似文献   

19.
The Taparko gold deposit, located in the eastern branch of the Proterozoic Birimian Bouroum-Yalogo greenstone belt (Burkina Faso) consists of a network of quartz veins developed in a N 170° trending shear zone (250 m wide, 4 km long) superimposed on the regional Birimian structural pattern. The quartz vein network is composed of: (a) a dominant array of quartz veins (type 1), parallel to the shear zone and comprising strongly deformed dark quartz exhibiting foliation, layering, ribbon, tension gashes, etc.; (b) oblique and subparallel related veins (type 2) of gray to white weakly deformed quartz crosscutting the dominant quartz veins resulting in breccia structures; and (c) shallow dipping veins (type 3), cross-cutting veins types 1 and 2 and filled by undeformed white buck structure quartz. Cross-cutting relationships and different quartz types in different veins and within individual veins imply a concomitant filling of the veins during the progressive deformation. Initial sinistral transcurrent shearing evolved with time to sinistral reverse shearing. Metallic minerals occur only in type 1 and 2 veins and were deposited in two stages, with native gold being related to second stage sulfides. Gold (and chalcopyrite) precipitated preferentially upon the surfaces of fractured pyrite grains in low-pressure sites (pressure shadow zones) around and/or within the sulfide grains (along subsequently annealed fractures). The formation of the South Taparko deposit can be divided into a succession of events: (a) during the first event, N 170°-directed sinistral transcurrent shearing resulted in a N 20° mylonitic foliation and fractured rock which allowed H2O-, CO2- and SiO2-rich fluids to circulate and deposit quartz with buck texture; (b) during the second event, type 1 quartz was strongly deformed and type 2 veins formed with sigmoidal shapes as viewed on a horizontal plane; and (c) during the third event, the sinistral transcurrent shearing evolved to sinistral reverse shearing and the deformation style evolved correspondingly from ductile to brittle-ductile. During the last phase of deformation gold nucleated and deposited in low-pressure zones. Received: 9 July 1997 / Accepted: 23 March 1998  相似文献   

20.
In the Sanandaj-Sirjan zone of metamorphic belt of Iran, the area south of Hamadan city comprises of metamorphic rocks, granitic batholith with pegmatites and quartz veins. Alvand batholith is emplaced into metasediments of early Mesozoic age. Fluid inclusions have been studied using microthermometry to evaluate the source of fluids from which quartz veins and pegmatites formed to investigate the possible relation between host rocks of pegmatites and the fluid inclusion types. Host minerals of fluid inclusions in pegmatites are quartz, andalusite and tourmaline. Fluid inclusions can be classified into four types. Type 1 inclusions are high salinity aqueous fluids (NaCleq >12 wt%). Type 2 inclusions are low to moderate salinity (NaCleq <12 wt%) aqueous fluids. Type 3 and 4 inclusions are carbonic and mixed CO2-H2O fluid inclusions. The distribution of fluid inclusions indicate that type 1 and type 2 inclusions are present in the pegmatites and quartz veins respectively in the Alvand batholith. This would imply that aqueous magmatic fluids with no detectable CO2 were present during the crystallization of these pegmatites and quartz veins. Types 3 and 4 inclusions are common in quartz veins and pegmatites in metamorphic rocks and are more abundant in the hornfelses. The distribution of the different types of fluid inclusions suggests that CO2 fluids generated during metamorphism and metamorphic fluids might also contribute to the formation of quartz veins and pegmatites in metamorphic terrains.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号