首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 390 毫秒
1.
The high As and F− groundwaters from Datong Basin are mostly soda waters with a Na/(Cl+SO4) (meq) ratio greater than unity, As and F− up to 1550 μg/L and 10.4 mg/L, respectively, and with pH between 7.6 and 9.1. Geochemical modeling indicates that the waters are oversaturated with respect to calcite and clay minerals such as kaolinite, and undersaturated with respect to primary rock-forming minerals such as anorthite and albite. The water chemistry also is affected by evapotranspiration. The degree of evaporative enrichment is up to 85 in terms of Cl−. Results of the hydrogeochemical studies indicate that the occurrence of soda water at Datong is the result of incongruent dissolution of aluminosilicates at one stage of their interaction with groundwater when the water is oversaturated with respect to calcite and evapotranspiration-related salt accumulation is not too strong. Studying the genesis of soda waters provides new insights into mechanism of As and F− enrichment in the aquifer system. Due to CaF2 solubility control and OH−–F− exchange reactions, F− can be enriched in soda water. And the high pH condition of soda water favors As desorption from oxyhydroxide surfaces, thereby increasing the concentration of As in the aqueous phase.  相似文献   

2.
Dissolution of evaporite formations, emergence of salty water springs, and intrusion of deep saline waters are important causes in changing the quality of surface water. The study area is part of the reservoir and downstream of Chamshir Dam, which is located in watershed of the Zohreh River 20?km southeast of Gachsaran City (southwest Iran). To construct powerhouse and related structures for supplying water to agricultural lands located in downstream of dam, water quality of Zohreh River was studied by eight sampling stations in the study area. Early studies showed that water quality of the Zohreh River decreases severely downstream of the Chamshir Dam. Spatial variations diagram of major ions, Piper and composition diagrams of water samples in selected stations mark the presence of two slight and major contaminating zones at sampling station R4 and R5. In these zones, concentration of Ca, SO4 and Na, Cl ions increase suddenly. Results of hydrogeological, hydrochemical, lithological and tectonics studies showed that even though there are several low discharges springs in the contaminated zone they cannot be related to surface dissolution of evaporate layers by Zohreh River. There is an important fault zone including Chamshir faults I and II in the contamination zones through which intrusion of sulfate brackish and chloride brine waters occur along the fault zone and then enter Zohreh River below its base level. In the absence of any surface evidence, the fault zone is the main cause of salinity. Evaluation of water balance salinity in contaminated zones shows that the discharge rate of saline waters to the river is not low and cannot be separated. These findings show that there are serious restrictions upon the purposes of the project.  相似文献   

3.
Contents of rare earth elements in waters and bottom sediments are maximum in the most mineralized soda lakes. It is shown that REE occur in waters mainly as carbonate (LnСО3)+ and oxyhydroxide LnO2H, LnO+, (LnO2)– complexes, whose activity in the La → Lu series changes in opposite directions. It has been determined that increase of mineralization leads mainly to higher concentrations of the dissolved HREE. Prevalence of the absolute values of MREE and HREE is recorded in basins with the development of bacterial processes. Geochemical barrier for the accumulation of LREE in waters can be represented by fluorcarbonates, whose saturation degree in the soda lake waters can be several orders of magnitude higher than the solubility products (SP). Oxidative and reductive settings in lakes are favorable for the formation of Ce(OH)4 and Ce(OH)3, respectively.  相似文献   

4.
《Applied Geochemistry》1995,10(1):65-83
The chemical and isotopic compositions of co-produced waters can be used to monitor the processes that take place during in situ combustion. Anticipated processes include mixing of waters, production of CO2, production of high concentrations of dissolved sulphate and variations in water chemistry associated with heated zones. Water sources include pore waters in oil-bearing strata, waters in overlying or underlying aquifers, water condensed from previously injected steam, and waters associated with combustion. Waters from all sources may mix during production and interpretation of the combustion process can be refined by an understanding of water sources. Produced fluids from the BP-Wolf Lake pilot site in Alberta have been examined to evaluate the effectiveness of the chemical composition of water and the isotopic compositions of aqueous species for monitoring in situ combustion.Produced waters do not show simple conservative mixing behaviour. This suggests that multiple sources of water and other processes, including water-rock reactions, act to modify water compositions. At least three sources of produced waters can be recognized and these are interpreted to be formation water, injected steam and waters that have low Cl and high HCO3 due to combustion. It is not possible to distinguish waters in the oil-bearing formation from regional waters present in aquifers that underlie the stimulated intervals. Dissolved aqueous species, such as SiO2, Na, K (as Na/K) and Cl can be used to monitor the approach of the combustion front. Sulphate has been suggested as an indicator of approaching combustion and, although sulphate concentrations rise as combustion approaches a producing well, this indicator is not reliable in all cases. The use of all the above chemical parameters is recommended for detection of combustion zones during operation.The isotope composition of produced waters confirms that there has been significant water-rock interaction during combustion. Carbon isotope compositions of HCO3 that range from −8 to −25% δ13C show that oil oxidation is a major contributor of CO2 at high temperatures, but CO2 produced by carbonate mineral dissolution becomes more significant as temperature decreases. Sulphate concentrations in waters produced during combustion can be an order of magnitude higher than those observed during steam stimulation. Both the oil (bitumen) and pyrite (FeS2) are significant sulphur sources. Typically, the sulphur in both phases is in a reduced state and is available through oxidation associated with combustion. The δ34S of dissolved sulphate in produced waters does not unequivocally identify either of the two major sources of sulphur. However, the relatively depleted δ34 values for SO4 suggest that the high sulphate concentrations generally associated with the approach of the combustion front result from the oxidation of pyrite.  相似文献   

5.
One of the undesirable characteristics of some groundwater sources is hardness, which has some adverse effects on water pipes, boilers and soap consumption. Therefore several treatment processes have been introduced to remove or reduce the hardness from hard waters. One of the new innovations in this regard is crystallization process. Hardness can be removed from hard waters by growth of calcium carbonate crystals in a fluidized bed reactor called pellet reactor. The design, setting up, starts up and reaching optimal condition for calcium carbonate crystallization process in a pellet reactor which has been initially seeded with sand as a crystal citation can be a successful solution for treatment of hard waters. The chemistry of pellet softening process is essentially the same as conventional softening process, instead of precipitation of calcium carbonate which does not have any useful consumption and must be removed once in a while some how, crystallization process in a fluidized bed reactor produces pure solid grain of calcite. These pellets can be used in some industries and are in fact an economic commodity. For this purpose a pilot was set up as a crystallization reactor and water with total hardness ranging from 150 up to 500 mg/l as CaCO3 was fed to the system with a flow rate of 24 l/hr. To remove hardness, caustic and soda, lime milk was fed to the system separately at first stage at then together. The formation of CaCO3 crystals on the surface of sands represented the reduction of hardness. An analysis is made for the characteristics of a softed water resulted from the use of caustic soda, lime milk or both as regent.  相似文献   

6.
I.R. Plimer 《Lithos》1974,7(1):43-51
Pipe deposits of quartz-bismuthinite-molybdenite in the roof zone of a granitic pluton metasomatised to a leucocratic soda syenite are surrounded by concentric spessartitic and sericitic alteration zones. Chemical and petrographic data on the alteration zones are presented. It is suggested that the alteration has formed from laterally moving acidic hydrothermal solutions which changed in composition as a result of reaction. The lateral change in MoS2 from the 2H polytype of the pipes to mixtures of the 2H and 3R polytypes in the surrounding altered rocks may reflect the lateral changes of solution chemistry.  相似文献   

7.
The abundance of various chemical elements (including trace, rare-earth, and radioactive) in the carbon dioxide mineral waters of the Choigan complex has been investigated. Three groups of waters are recognized according to the geochemical conditions and chemical composition: groundwaters of regional-jointing zone with oxidizing conditions; CO2-enriched groundwaters of regional-jointing zone with oxidizing conditions; and groundwaters of fault zones with reducing conditions. It is shown that water–rock interaction intensified by high temperature and carbon dioxide action is the main process determining the chemical composition of groundwaters.  相似文献   

8.
The paper reviews data (acquired in 2007–2016) on aliphatic and polycyclic aromatic hydrocarbons in comparison with data on concentrations of lipids, Corg, and chlorophyll a in the water and bottom sediments the river–sea geochemical barrier (for the Northern Dvina, Ob, Yenisei, and Lena rivers). It was established that the concentrations of anthropogenic hydrocarbons decrease and these compounds precipitate like other organic compounds and particulate matter, where riverine and marine waters mix. Relatively pure water flows in the pelagic zones of seas. In spite of low temperatures in the Arctic, anthropogenic hydrocarbons transform so rapidly that natural compounds dominate in the water and bottom sediments: autochthonous in the seawater and allochthonous in the bottom sediments.  相似文献   

9.
Results of the chemical and isotopic analysis of the water and gases discharged from volcanic crater lakes and soda springs located along the Cameroon Volcanic Line were used to characterize and infer their genetic relationships. Variations in the solute compositions of the waters indicate the dominant influence of silicate hydrolysis. Na+ (40–95%) constitutes the major cation in the springs while Fe2+ + Mg2+ (70%) dominate in the CO2-rich lakes. The principal anion is HCO3 (>90%), except in the coastal springs where Cl-predominates. Lakes Nyos and Monoun have FeMgCaHCO3− type signatures; the soda springs are essentially NaHCO3− type, while all other lakes show similar ionic compositions to dilute surface waters. Dissolved gases show essentially CO2 (>90%), with small amounts of Ar and N2, while CH4 constitutes the principal component in the non-gassy lakes. Active volcanic gases are generally absent, except in the Lobe spring with detectable H2S. Stable isotope ratio evidence indicates that the bicarbonate waters are essentially of meteoric origin. CO2 (δ13C = −2 to −8%0 and He (3He/4He = 1 to 5.6Ra) infer a mantle contribution to the total CO2. CH4 has a biogenic source, while Ar and N2 are essentially atmospheric in origin, but mixing is quite common.  相似文献   

10.
Physico-chemical parameters, major ion chemistry and isotope composition of surface and groundwaters were determined in forested coastal catchments and adjacent coastal plains. Results showed obvious characterisation related to physical and hydrological setting, and highly variable spatial differences reflecting the complexities of these areas. All these coastal waters are dominated by Na–Cl and fall on a common dilution line; hydrochemical grouping is largely due to anionic differences (Cl, SO4 and HCO3), although Na and Mg ratios also vary. Six major hydrochemical facies were determined. For groundwaters, compositional differences are largely related to aquifer material and level of confinement; for coastal groundwaters important are tidal effects and proximity to the shoreline. Differentiation for surface waters is mainly by drainage morphology, flow regime plus proximity to the coast. Connectivity between water bodies is reflected by minor base flow to catchment streams, including with flood plain wetlands, but mostly occurs in low-lying zones where there is mixing of fresh and saline water within surface water and subterranean estuaries, or by seawater intrusion enhanced by overuse. Oxygen and hydrogen isotopic data for confined and semi-confined groundwaters along the coast indicates local recharge; fresh surface waters in the elevated catchments are shown to be sourced further inland plus have experienced evaporation.  相似文献   

11.
《Applied Geochemistry》2003,18(7):1095-1110
The exchange of 226Ra and trace metals across the tailings-water interface and the mechanisms governing their mobility were assessed via sub-centimetre resolution profiling of dissolved constituents across the tailings–water interface in Cell 14 of the Quirke Waste Management Area at Rio Algom's Quirke Mine, near Elliot Lake, Ontario, Canada. Shallow zones (<1.5 m water depth) are characterized by sparse filamentous vegetation, well-mixed water columns and fully oxygenated bottom waters. Profiles of dissolved O2, Fe and Mn indicate that the tailings deposits in these areas are sub-oxic below tailings depths of ∼3 cm. These zones exhibit minor remobilization of Ra in the upper 5 cm of the tailings deposit; 226Ra fluxes at these sites are relatively small, and contribute negligibly to the water column activity of 226Ra. The shallow areas also exhibit minor remobilization of Ni, As, Mo and U. The release of these elements to the water cover is, however, limited by scavenging mechanisms in the interfacial oxic horizons. The presence of thick vegetation (Chara sp.) in the deeper areas (>2 m water depth) fosters stagnant bottom waters and permits the development of anoxia above the benthic boundary. These anoxic tailings are characterized by substantial remobilization of 226Ra, resulting in a relatively large flux of 226Ra from the tailings to the water column. The strong correlation between the porewater profiles of 226Ra and Ba (r2=0.99), as well as solubility calculations, indicate that the mobility of Ra is controlled by saturation with respect to a poorly ordered and/or impure barite phase [(Ra,Ba)SO4]. In the anoxic zones, severe undersaturation with respect to barite is sustained by microbial SO4 reduction. Flux calculations suggest that the increase in 226Ra activity in the water cover since 1995 (from <0.5 to 2.5 Bq l−1) can be attributed to an increase in the spatial distribution of anoxic bottom waters caused by increased density of benthic flora. The anoxic, vegetated areas also exhibit minor remobilization with respect to dissolved As, Ni and Zn. The removal of trace metals in the anoxic bottom waters appears to be limited by the availability of free sulphide. Collectively, the data demonstrate that while the water cover over the U mill tailings minimizes sulphide oxidation and metal mobility, anoxic conditions which have developed in deeper areas have led to increased mobility of 226Ra.  相似文献   

12.
Mineral waters in Sarissky Stiavnik and Radoma are formed on the tectonic fault zones of the Zlin formation and Makovica sandstones. Precipitation waters flow downwards thus becoming enriched in TDS content. The process is enhanced by inflow of CO2 rich mineral waters of the Obidowa-Slopnice-Zboj unit, pushed by carbon dioxide and methane. Mineral waters in Sarissky Stiavnik and Radoma are of the Na-HCO3 chemical type, typical for the mineral water springs of the Magura unit in this part of the flysch belt. The origin of chloride component in the TDS content can be found in the waters with thalasogenic mineralization beneath the Magura unit, where the Obidowa-Slopnice-Zboj unit is to be found. Hydrogeological structures in Sarissky Stiavnik and Radoma can be classified as combined hydrogeological structures, where the upper partial hydrogeological structure is opened (Magura unit) and the lower structure is semi-closed (unit Obidowa-Slopnice-Zboj).  相似文献   

13.
《Applied Geochemistry》2005,20(1):41-54
The Pisa plain contains a multilayered confined aquifer made up of Pleistocene sands and gravels. The groundwater from the wells tapping these horizons are generally of poor quality: they exhibit significant TDS, relatively high Cl content and considerable hardness. During geothermal prospecting of the Pisa plain, about 80 wells ranging in depth from 20 to 250 m were sampled, and both chemical (major ions) and isotope analyses were conducted. The data collected show that TDS is strongly influenced by HCO3 and Cl, and that a 3-component mixing process affects the groundwater’s chemical composition. The end members of this mixing process have been identified as: (a) diluted HCO3 meteoric water, which enters the plain mainly from the eastern and northern sides of the study area; (b) Cl-rich water, which largely characterizes the shallow sandy horizons of the multilayered aquifer system and has been attributed to the presence of seawater, as also suggested by δ18O data; and (c) SO4-rich groundwater, which is linked to the hot groundwater circulation within Mesozoic carbonate formations and, at first sight, seemed to affect only the gravelly aquifer. A SO4-rich water also contributes to the sandy aquifer; it probably enters the plain both laterally, from the margins of the Pisan Mountains and from depth, but promptly undergoes substantial SO4 reduction processes by bacteria. That such processes are at work is suggested both by the low SO4 and high HCO3 concentrations found in the well waters and by their C and S isotope compositions. The collected data have allowed zones with higher quality waters to be identified, which may someday be used for the local water supply.  相似文献   

14.
Germanium concentrations in geothermal waters in Iceland lie mostly in the range 2–30 ppb. There is an overall positive relation between the germanium content of the water and its temperature. Most of the germanium occurs as Ge(OH)?5in solution but Ge(OH)4 may also be present in significant amounts in saline waters when above 200°C. Evidence indicates that aqueous germanium concentrations are controlled by exchange reactions where it substitutes for silica in silicates and iron in sulphides. It is the rate of dissolution and the relative abundance of the alteration minerals which take up germanium to a variable extent that ultimately fix Ge(OH)4 concentrations in the water. This, together with water pH, fixes total dissolved germanium. It is mostly the primary rock composition that dictates the relative abundance of the alteration minerals. Conductive cooling in upflow zones favours removal of germanium from solution. During the initial stages of boiling of rising hot water dissolution is enhanced but precipitation at later stages.Thermodynamic data of various aqueous germanium species and several minerals are summarized and dissociation constants and solubilities estimated at elevated temperatures using available predictive methods.  相似文献   

15.
Surface and ground waters, collected over a period of three years from the Osamu Utsumi uranium mine and the Morro do Ferro thorium/rare-earth element (Th/REE) deposits, were analyzed and interpreted to identify the major hydrogeochemical processes. These results provided information on the current geochemical evolution of ground waters for two study sites within the Poços de Caldas Natural Analogue Project.The ground waters are a K---Fe---SO4---F type, a highly unusual composition related to intense weathering of a hydrothermally altered and mineralized complex of phonolites. Tritium and stable isotope data indicate that ground waters are of meteoric origin and are not affected significantly by evaporation or water-rock interactions. Recharging ground waters at both study sites demonstrate water of less than about 35 years in age, whereas deeper, more evolved ground waters are below 1 TU but still contain in most cases detectable tritium. These deeper ground waters may be interpreted as being of 35 to 60 or more years in age, resulting mainly from an admixture of younger with older ground waters and/or indicating the influence of subsurface produced tritium.Geochemical processes involving water-rock-gas interactions have been modeled using ground water compositions, mineralogic data, ion plots and computations of speciation, non-thermodynamic mass balance and thermodynamic mass transfer. The geochemical reaction models can reproduce the water chemistry and mineral occurrences and they were validated by comparing the results of thermodynamic mass transfer calculations (using the PHREEQE program, Parkhurst et al., 1980). The results from the geochemical reaction models reveal that the dominant processes are production of CO2 in the soil zone through aerobic decay of organic matter, dissolution of fluorite, calcite, K-feldspar, albite, chlorite and manganese oxides, oxidation of pyrite and sphalerite, and precipitation of ferric oxides, silica and kaolinite. Gibbsite precipitation can be modeled for the shallow (recharge) water chemistry at Morro do Ferro, consistent with known mineralogy. Recharge waters are undersaturated with respect to barite and discharging waters and deeper ground waters are saturated to supersaturated with respect to barite demonstrating a strong solubility control. Strontium isotope data demonstrate that sources other than calcium-bearing minerals are required to account for the dissolved strontium in the ground waters. These may include K-feldspar, smectite-chlorite mixed-layer clays and goyazite [SrAl3(PO4)2(OH)5·H2O].  相似文献   

16.
We measured archaeal lipid distributions from globally distributed samples of freshwater, marine, and hypersaline suspended particulate matter. Cluster analysis of relative lipid distributions identified four distinct groups, including: (1) marine epipelagic (<100 m) waters, (2) marine mesopelagic (200-1500 m) and upwelling waters, (3) freshwater/estuarine waters, and (4) hypersaline waters. A pronounced difference in lipid composition patterns is the near absence of ring-containing glycerol dialkyl glycerol tetraethers (GDGTs) at high salinity. Different archaeal communities populate marine (mesophilic Crenarchaeota and Euryarchaeota), and hypersaline environments (halophilic Euryarchaeota) and community shifts can regulate differences in lipid patterns between marine and hypersaline waters. We propose that community changes within meosphilic marine Archaea also regulate the lipid patterns distinguishing epipelagic and mesopelagic/upwelling zones. Changes in the relative amounts of crenarchaeol and caldarchaeol and low relative abundances of ringed structures in surface waters differentiate lipids from the epipelagic and mesopelagic/upwelling waters. Patterns of lipids in mesopelagic (and upwelling) waters are similar to those expected of the ammonia-oxidizing Group I Crenarchaeota, with predominance of crenarchaeol and abundant cyclic GDGTs; non-metric multidimensional analysis (NMDS) shows this pattern is associated with high nitrate concentrations. In contrast, limited culture evidence indicates marine Group II Euryarchaeota may be capable of producing mainly caldarchaeol and some, but not all, of the ringed GDGTs and we suggest that these organisms, along with the Crenarchaeota, contribute to lipids in epipelagic marine waters. Calculated TEX86 temperatures in mesopelagic samples (reported here and in published data sets) are always much warmer than measured in situ temperatures. We propose lipids used in the temperature proxy derive from both Euryarchaeaota and Crenarchaeota, and observed values of TEX86 are subject to changes in their ecology as influenced by nutrient fluctuations or other perturbations. Applications of published core-top TEX86-SST correlations require that (1) the surface waters are always composed of similar communities with the same temperature response and (2) that deeper water GDGT production is not transported to the sediments. Our lipid distribution patterns demonstrate both surface-water archaeal community differences (which accompany greater nutrient influxes, shoaling of mesopelagic Crenarchaeota during upwelling periods, and possibly due to an influx of terrestrial Archaea), and changes in organic matter transport through the water column can affect the distribution of lipids recorded in sediments. We therefore suggest that reported temperature shifts in ancient applications indicate TEX86 lipids recorded not only temperature changes, but also changes in archaeal ecology, nutrient concentrations, and possibly oceanographic conditions.  相似文献   

17.
The paper presents data on the specifics of the distributions of chemical elements in natural waters of the Kola North depending on the landscape–geochemical characteristics of the water catchment areas and aerotechnogenic pollution. The territory is subdivided into seven zones with different dominant rock types and typical landscapes. Lakes in the Kola region generally contain elevated concentrations of Cu, Ni, Co, Cr, V, Mo, U, Sb, Bi, Al, Fe, Mn, Sr, Li, Rb, Pb, Zn, Cd, La, and Ce. The waters of lakes in the influence zones of Cu–Ni mines are enriched in La, Ce, Sm, Gd, Pr, and Nd. In waterlogged landscapes, waters are enriched in certain trace elements because of their migration with humic acids. Technogenic acidic precipitation is proved to result in leaching of several elements, first of all Cd, Zn, and As (as well as other elements contained in rocks composing the water catchment areas) and their transfer into the waters.  相似文献   

18.
Highly mineralized waters of different chemical types and origin occur in the flysch formations and their bedrocks in the western part of the Polish Carpathians. The marine sedimentation water of the flysch formations is not preserved, as the most mineralized and the heaviest isotopic values of flysch waters are characterized by δ18O and δ2H values in the ranges of 5–7‰ and −(20–30)‰, respectively. Their origin is related to the dehydration of clay minerals during burial diagenesis, with molecules of marine water completely removed by molecules of released bound water. They are relatively enriched in Na+ in respect to the marine water, supposedly due to the release of Na+ during the illitization of smectites and preferable incorporation of other cations from the primary brine into newly formed minerals. In some parts of younger formations, i.e. in the Badenian sediments, brines occur with isotopic composition close to SMOW and Cl− contents greatly exceeding the typical marine value of about 19.6 g/L, supposedly due to ultrafiltration. Most probably, the marine water of the flysch formations was similarly enriched chemically in its initial burial stages. Final Cl− contents in diagenetic waters depend on different Cl− contents in the primary brines and on relationships between diagenetic and further ultrafiltration processes. In some areas, diagenetic waters migrate to the surface along fault zones and mix with young local meteoric waters becoming diluted, with the isotope composition scattering along typical mixing lines. In areas with independent CO2 flow from great depths, they form chloride CO2-rich waters. Common CO2-rich waters are formed in areas without near-surface occurrences of diagenetic waters. They change from the HCO3–Ca type for modern waters to HCO3–Mg–Ca, HCO3–Na–Ca and other types with elevated TDS, Mg2+ and/or Na− contents for old waters reaching even those of glacial age. Bedrocks of the flysch are represented by Mesozoic and Paleozoic mudstones, sandstones and carbonates, and in some areas by Badenian sediments. Brines of the Mesozoic and Paleozoic bedrocks are usually significantly enriched in Ca2+ and Mg2+ in comparison with the Badenian brines. By analogy to the deepest brines in the adjacent Upper Silesian Coal Basin, they are supposed to originate from paleometeoric waters of a hot climate.  相似文献   

19.
Atacamite, a copper hydroxychloride, is an important constituent of supergene oxide zones of copper deposits in northern Chile, whereas in similar deposits elsewhere, it is rare. In Chile, it has generally been assumed to be a primary constituent of the supergene zones. There are two difficulties with this supposition. The first is that atacamite requires saline water for its formation, whereas supergene oxidation was caused by percolating, oxygenated meteoric water, mainly rainwater. The second is that atacamite dissolves rapidly or undergoes phase change when exposed to fresh water. Supergene enrichment of copper deposits in northern Chile extended over a long period, 44 to 9 Ma, being terminated by the onset of hyperaridity. During this period, there was at least intermittent rainfall, exposing previously formed atacamite to dissolution or phase change. Furthermore, atacamite-bearing oxide zones in several deposits are directly overlain by thick Miocene alluvial gravels; the stream waters that transported these gravels would have permeated the oxide zones. In some deposits, atacamite-bearing assemblages occur both in the oxide zones and in contiguous gravels. We suggest that atacamite-bearing oxide assemblages are more likely to have been a replacement of preexisting oxide phases after the onset of hyperaridity at about 9 Ma. A hyperarid climate made possible evaporation and concentration of chloride in meteoric waters. In this paper, we discuss another source of saline waters to modify oxide zones. Dewatering of the Domeyko Basin expelled brines along faults, some of which had earlier guided the location of porphyry deposits. At the Spence porphyry copper deposit, saline waters, which δD vs δ 18O isotope analyses identify as basinal brines, are presently rising through the deposit, then flowing away along the base of the covering gravels. Compositions of these waters lie within the stability fields of atacamite and brochantite, the two minerals that comprise the oxide zone. Evidence is presented for other porphyry deposits, Radomiro Tomic and Gaby Sur, that basinal brines may have been involved in the late formation of atacamite.  相似文献   

20.

Tamborine Mountain, Queensland (Australia), is a prime example of a basalt fractured-rock aquifer. Yet very little is known about the hydrochemistry of this groundwater system. Both analytical (major ions and stable isotopes) and multivariate (hierarchical cluster analysis, principal component analysis and factor analysis) analyses were used in this study to investigate the factors that interact within this aquifer system, in order to determine groundwater hydrogeochemistry. A new approach was applied to the data by classifying hydrographs by water type to clearly identify differing aquifer zones. Three distinct groundwater chemistry types were identified, and they were differentiated by variations in depth. Shallow bores were dominated by Na–Cl waters, deep bores were dominated by Na–HCO3 and Ca–HCO3 waters, and the two deepest bores were dominated by mixed water types. The evaluation of hydrogeochemical data has determined that both mineral weathering processes and groundwater/surface-water interaction had a strong influence on the hydrogeochemistry. Seasonal effects were minimal in the study area based on physicochemical parameters and ion chemistry. However, stable isotopic data show temporal trends. Increased rainfall events during the wet season produced a depletion in δ18O and increased d-excess values. The opposite is found during the dry season as a result of higher evaporation rates that are not hindered by intense rainfall events.

  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号