共查询到20条相似文献，搜索用时 208 毫秒
1.
A new finite element model to analyze the seismic response of deformable rocking bodies and rocking structures is presented. The model comprises a set of beam elements to represent the rocking body and zero‐length fiber cross‐section elements at the ends of the rocking body to represent the rocking surfaces. The energy dissipation during rocking motion is modeled using a Hilber–Hughes–Taylor numerically dissipative time step integration scheme. The model is verified through correct prediction of the horizontal and vertical displacements of a rigid rocking block and validated against the analytical Housner model solution for the rocking response of rigid bodies subjected to ground motion excitation. The proposed model is augmented by a dissipative model of the ground under the rocking surface to facilitate modeling of the rocking response of deformable bodies and structures. The augmented model is used to compute the overturning and uplift rocking response spectra for a deformable rocking frame structure to symmetric and anti‐symmetric Ricker pulse ground motion excitation. It is found that the deformability of the columns of a rocking frame does not jeopardize its stability under Ricker pulse ground motion excitation. In fact, there are cases where a deformable rocking frame is more stable than its rigid counterpart. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
2.
The influence of interface geometry,stiffness, and crushing on the dynamic response of masonry collapse mechanisms 
下载免费PDF全文
下载免费PDF全文 Failure of masonry structures generally occurs via specific collapse mechanisms which have been well documented. Using rocking dynamics, equations of motion have been derived for a number of different failure mechanisms ranging from the simple overturning of a single block to more complicated mechanisms. However, most of the equations of motion derived thus far assume that the structures can be modelled as rigid bodies rocking on rigid interfaces with an infinite compressive strength—which is not always the case. In fact, crushing of masonry—commonly observed in larger scale constructions and vertically restrained walls—can lead to a reduction in the dynamic capacity of these structures. This paper rederives the rocking equation of motion to account for the influence of flexible interfaces, characterized by a specific interface stiffness as well as finite compressive strength. The interface now includes a continually shifting rotation point, the location of which depends not only on the material properties of the interface but also on its geometry. Expressions have thus also been derived for interfaces of different geometries, and parametric studies conducted to gauge their influence on dynamic response. The new interface formulations are also implemented within a new analytical modelling tool that provides a novel approach to the dynamic analysis of masonry collapse mechanisms. Finally, this tool is exemplified, along with the importance of the interface formulation, by evaluating the collapse of the Dharahara Tower in Kathmandu, which was almost completely destroyed during the 2015 Gorkha earthquake. 相似文献
3.
The three‐dimensional behavior of inverted pendulum cylindrical structures during earthquakes 下载免费PDF全文
下载免费PDF全文 《地震工程与结构动力学》2017,46(14):2261-2280
In order to use rocking as a seismic response modification strategy along both directions of seismic excitation, a three‐dimensional (3D) rocking model should be developed. Since stepping or rolling rocking structural members out of their initial position is not a desirable performance, a rocking design should not involve these modes of motion. To this end, a model that takes the aforementioned constraint into account needs to be developed. This paper examines the 3D motion of a bounded rigid cylinder that is allowed to uplift and sustain rocking and wobbling (unsteady rolling) motion without sliding or rolling out of its initial position (i.e., a 3D inverted pendulum). Thus, the cylinder is constrained to zero residual displacement at the end of its 3D motion. This 3D dynamic model of the rocking rigid cylinder has two DOFs (three when damping is included), making it the simplest 3D extension of Housner's classical two‐dimensional (2D) rocking model. The development of models with and without damping is presented first. They are simple enough to perform extensive parametric analyses. Modes of motion of the cylinder are identified and presented. Then, 3D rocking and wobbling earthquake response spectra are constructed and compared with the classical 2D rocking earthquake response spectra. The 3D bounded rocking earthquake response spectra for the ground motions considered seem to have a very simple linear form. Finally, it is shown that the use of a 2D rocking model may lead to unacceptably unconservative estimates of the 3D rocking and wobbling seismic response. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
4.
An analytical model of a deformable cantilever structure rocking on a rigid surface: experimental validation 下载免费PDF全文
下载免费PDF全文 This paper describes an experimental program to examine the dynamic response of deformable cantilevers rocking on a rigid surface. The primary goal of the tests is to verify and validate a dynamic rocking model that describes the behavior of these structures. The benchmark response data was obtained from shaking‐table tests on deformable rocking specimens with different natural vibration frequencies and different aspect ratios excited by analytical pulses and recorded ground motions. The responses computed using the model are found to be in good agreement with the benchmark test results. Widely used impact, restitution and damping assumptions are revisited based on the experiment results and the analytical model findings. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
5.
In this paper the rocking response of slender/rigid structures stepping on a viscoelastic foundation is revisited. The study examines in depth the motion of the system with a non‐linear analysis that complements the linear analysis presented in the past by other investigators. The non‐linear formulation combines the fully non‐linear equations of motion together with the impulse‐momentum equations during impacts. The study shows that the response of the rocking block depends on the size, shape and slenderness of the block, the stiffness and damping of the foundation and the energy loss during impact. The effect of the stiffness and damping of the foundation system along with the influence of the coefficient of restitution during impact is presented in rocking spectra in which the peak values of the response are compared with those of the rigid block rocking on a monolithic base. Various trends of the response are identified. For instance, less slender and smaller blocks have a tendency to separate easier, whereas the smaller the angle of slenderness, the less sensitive the response to the flexibility, damping and coefficient of restitution of the foundation. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
6.
A nonlinear macroelement model for the seismic analysis of masonry buildings 总被引：1，自引：0，他引：1 下载免费PDF全文
下载免费PDF全文 The macroelement technique for modelling the nonlinear response of masonry panels is particularly efficient and suitable for the analysis of the seismic behaviour of complex walls and buildings. The paper presents a macroelement model specifically developed for simulating the cyclic in‐plane response of masonry walls, with possible applications in nonlinear static and dynamic analysis of masonry structures. The model, starting from a previously developed macroelement model, has been refined in the representation of flexural–rocking and shear damage modes, and it is capable of fairly simulating the experimental response of cyclic tests performed on masonry piers. By means of two internal degrees of freedom, the two‐node macroelement permits to represent the coupling of axial and flexural response as well as the interaction of shear and flexural damage. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
7.
The investigation of structural single rocking walls (SRWs) continues to gain interest as they produce self-centering lateral load responses with reduced structural damage. The simple rocking model with modifications has been shown to capture these responses accurately if the SRW and its underlying base are infinitely rigid. This paper advances previous rocking models by accounting for (1) the inelastic actions at or near the base of the SRW and (2) the flexural responses within the wall. Included in the proposed advancements are hysteretic and inherent viscous damping associated with these two deformation components so that the total dynamic responses of SRWs can be captured with good accuracy. A system of nonlinear equations of motion is developed, in which the rocking base is discretized into fibers using a zero-length element to locate the associated compressive deformations and damage. The flexural deformations of the rocking body are captured using an elastic term, while the impact events are modeled using impulse-momentum equations. Comparisons with experiments of structural precast concrete and masonry SRWs show that the proposed approach accurately estimates the dynamic responses of different SRWs with and without unbonded posttensioning, for various dynamic excitations and degrees of hysteretic action. Using the proposed approach, a numerical investigation employs different configurations of structural SRWs to quantify the various sources of energy loss, including hysteretic action and impact damping, during various horizontal ground motions. 相似文献
8.
Allowing flexible structures to uplift and rock during earthquakes can significantly reduce the force demands and residual displacements. However, such structures are still susceptible to large deformations and accelerations that can compromise their functionality. In this paper, we examine the dynamic response of elastic rocking oscillators and suggest that their lateral drifts and accelerations can be limited effectively by using inerter devices. To this end, we offer a detailed examination of the effects of structural flexibility on the efficiency of the proposed system. The analytical expressions governing the motion of deformable structures with base uplift are revisited to incorporate the effects of the supplemental rotational inertia. The proposed model is then used to study the structural demands of flexible rocking structures under coherent pulses as well as noncoherent real pulse-like ground motions. Our results show that combining rocking with inerters can be an efficient strategy to control the deformation and acceleration demands in uplifting flexible systems. 相似文献
9.
An analytical model of a deformable cantilever structure rocking on a rigid surface: development and verification 下载免费PDF全文
下载免费PDF全文 This paper extends previously developed models to account for the influence of the column and the foundation masses on the behavior of top‐heavy deformable elastic cantilever columns rocking on a rigid support surface. Several models for energy dissipation at impact are examined and compared. A novel Vertical Velocity Energy Loss model is introduced. Rocking uplift and overturning spectra for the deformable elastic cantilever model excited by sinusoidal ground motions are constructed. The effects of non‐dimensional model parameter variations on the rocking spectra and the overturning stability of the model are presented. It is shown that the remarkable overturning stability of dynamically excited large cantilever columns is not jeopardized by their deformability. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
10.
11.
Luigi Sorrentino Omar AlShawa Luis D. Decanini 《Bulletin of Earthquake Engineering》2011,9(5):1617-1642
Existing unreinforced masonry buildings frequently suffer out-of-plane local collapse mechanisms when undergoing earthquake
ground motion. The energy damping that occurs during the motion, due to impacts of a wall against the foundation or against
other walls, is a relevant parameter on the response. An experimental investigation has been carried out to estimate the dissipation
of kinetic energy that takes place during free oscillations. Restraint conditions allow for two-sided rocking (wall resting
on a foundation) and one-sided rocking (wall resting on a foundation adjacent to transverse walls). Five specimens have been
tested, modelling walls acted out-of-plane (fa?ades). When one-sided rocking is under consideration, different depths of the
contact surface between fa?ade and transverse walls are considered. In the case of two-sided rocking, the experimental coefficient
of restitution is slightly lower than the analytic coefficient. In the case of one-sided rocking, an analytic formulation
is proposed and this is compared against experimental data. Although the coefficient of restitution of one-sided rocking is
less than half that of two-sided rocking, it is not equal to zero. Thus, it cannot induce a sudden stop of the motion. Hence,
nonlinear time history analyses performed under this assumption may prove unsafe. Moreover, a comparison has been carried
out between overturning maps, induced by twenty natural accelerograms, computed for the analytic coefficient of restitution
and those computed for the experimental coefficient of restitution. The increased energy dissipation reduces the frequency
of overturning and causes a more regular behaviour. 相似文献
12.
Abdolrasool Anooshehpoor James N. Brune 《Soil Dynamics and Earthquake Engineering》2002,22(9-12):917-922
Precariously balanced rocks in seismically active regions are effectively upper-limit strong motion seismoscopes that have been in place for thousands of years. Thus, estimates of the dynamic toppling acceleration of these rocks (through rigid body rocking) can provide constraints on the peak ground accelerations experienced during past earthquakes. We have developed a methodology that uses a two-dimensional numerical code to calculate the dynamic rocking response of precarious rocks to realistic ground acceleration time histories. Statistical analyses of the dynamic response of these rocks to a range of synthetic seismograms, as well as strong motion records, can provide important information about the ground motion attenuation curves and seismic hazard maps. We use shake table tests to investigate the dynamic rocking response of 13 wooden rectangular blocks of various sizes and aspect ratios subjected to realistic seismograms and compare the results with those of numerical tests. Our results indicate good agreement between the shake table and numerical results. 相似文献
13.
Tall rigid blocks are prevalent in ancient historical constructions. Such structures are prone to rocking behaviour under strong ground motion, which is recognizably challenging to predict and mitigate. Our study is motivated by the need to provide innovative nonintrusive solutions to attenuate the rocking response of historical buildings and monuments. In this paper, we examine a novel scheme that employs external resonators buried next to the rocking structure as a means to control its seismic response. The strategy capitalizes on the vibration absorbing potential of the structure-soil-resonator interaction. Furthermore, the benefits of combining the resonators with inerters in order to reduce their gravitational mass without hampering their motion-control capabilities are also explored. Advanced numerical analyses of discrete models under coherent acceleration pulses with rocking bodies of different slenderness ratios under various ground motion intensities highlight the significant vibration absorbing qualities of the external resonating system. The influence of key system parameters such as the mass, stiffness, and damping of the resonator and those of the soil-structure-resonator arrangement are studied. Finally, a case study on the evaluation of the response of rocking structures with external resonators under real pulse-like ground-motion records confirms the important reductions in peak seismic rotational demands obtained with the proposed arrangement. 相似文献
14.
The seismic behaviour of a wide variety of structures can be characterized by the rocking response of rigid blocks. Nevertheless, suitable seismic control strategies are presently limited and consist mostly on preventing rocking motion all together, which may induce undesirable stress concentrations and lead to impractical interventions. In this paper, we investigate the potential advantages of using supplemental rotational inertia to mitigate the effects of earthquakes on rocking structures. The newly proposed strategy employs inerters, which are mechanical devices that develop resisting forces proportional to the relative acceleration between their terminals and can be combined with a clutch to ensure their rotational inertia is only employed to oppose the motion. We demonstrate that the inclusion of the inerter effectively reduces the frequency parameter of the block, resulting in lower rotation seismic demands and enhanced stability due to the well-known size effects of the rocking behaviour. The effects of the inerter and inerter-clutch devices on the response scaling and similarity are also studied. An examination of their overturning fragility functions reveals that inerter-equipped structures experience reduced probabilities of overturning in comparison with uncontrolled bodies, while the addition of a clutch further improves their seismic stability. The concept advanced in this paper is particularly attractive for the protection of rocking bodies as it opens the possibility of nonlocally modifying the dynamic response of rocking structures without altering their geometry. 相似文献
15.
Numerous structures uplift under the influence of strong ground motion. Although many researchers have investigated the effects of base uplift on very stiff (ideally rigid) structures, the rocking response of flexible structures has received less attention. Related practical analysis methods treat these structures with simplified ‘equivalent’ oscillators without directly addressing the interaction between elasticity and rocking. This paper addresses the fundamental dynamics of flexible rocking structures. The nonlinear equations of motion, derived using a Lagrangian formulation for large rotations, are presented for an idealized structural model. Particular attention is devoted to the transition between successive phases; a physically consistent classical impact framework is utilized alongside an energy approach. The fundamental dynamic properties of the flexible rocking system are compared with those of similar linear elastic oscillators and rigid rocking structures, revealing the distinct characteristics of flexible rocking structures. In particular, parametric analysis is performed to quantify the effect of elasticity on uplift, overturning instability, and harmonic response, from which an uplifted resonance emerges. The contribution of stability and strength to the collapse of flexible rocking structures is discussed. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
16.
Predicting the rocking response of structures to ground motion is important for assessment of existing structures, which may be vulnerable to uplift and overturning, as well as for designs which employ rocking as a means of seismic isolation. However, the majority of studies utilize a single rocking block to characterize rocking motion. In this paper, a methodology is proposed to derive equivalence between the single rocking block and various rocking mechanisms, yielding a set of fundamental rocking parameters. Specific structures that have exact dynamic equivalence with a single rocking block, are first reviewed. Subsequently, approximate equivalence between single and multiple block mechanisms is achieved through local linearization of the relevant equations of motion. The approximation error associated with linearization is quantified for three essential mechanisms, providing a measure of the confidence with which the proposed methodology can be applied. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
17.
As far as the dynamics of multibody systems is concerned, a brief review has been performed in order to frame the dynamic response of a trilith (the simplest scheme of a colonnade belonging to a temple) into a wide theoretical background. Under the assumption of rigid bodies, two different approaches can be found in the literature: rigid or deformable contacts formulation. In this paper, an effort is made at outlining the principle of rigid contact formulation and of deformable contact formulation. The latter approach can be assumed within the framework of the distinct element method; for this purpose a model of deformable contact has been proposed in order to simulate the real behaviour of stone joints. The sample application referred to the trilith will be presented in Part 2. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
18.
Performance-based earthquake engineering requires accurate estimation of structural response associated with different damage states because of strong ground motion. In recent work (Meza-Fajardo and Papageorgiou, 2018, EESD), we demonstrated that a significant contribution to the response of elastic soil-structure systems for high-rise buildings is attributed to base rocking associated with Rayleigh waves. The present paper presents results of a study investigating the effects of Rayleigh waves on the response of soil-structure systems with nonlinear behavior at the level of the superstructure. By introducing a rigid-elastic rotational spring at the base of the building, we take into account the stiffness reduction due to damage to the lateral load-resisting system at its root, and with it, increased displacement demands. Considering different levels of ductility and post-yield stiffness, we investigate the impact of rocking because of Rayleigh waves on maximum and residual interstory drift ratios. Our results indicate that rocking due to surface waves should be an important consideration for design and evaluation of tall buildings, as inelastic action elongates their effective natural period, and consequently, they are more prone to be damaged by resonance and excitation of extended duration because of Rayleigh waves. 相似文献
19.
In structural mechanics there are several occasions where a linearized formulation of the original non‐linear problem reduces considerably the computational effort for the response analysis. In a broader sense, a linearized formulation can be viewed as a first‐order expansion of the dynamic equilibrium of the system about a ‘static’ configuration; yet caution should be exercised when identifying the ‘correct’ static configuration. This paper uses as a case study the rocking response of a rigid block stepping on viscoelastic supports, whose non‐linear dynamics is the subject of the companion paper, and elaborates on the challenge of identifying the most appropriate static configuration around which a first‐order expansion will produce the most dependable results in each regime of motion. For the regime when the heel of the block separates, a revised set of linearized equations is presented, which is an improvement to the unconservative equations published previously in the literature. The associated eigenvalues demonstrate that the characteristics of the foundation do not affect the rocking motion of the block once the heel separates. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
20.
The present study explores analytically the concept of rocking isolation in bridges considering for the first time the influence of the abutment-backfill system. The dynamic response of rocking bridges with free-standing piers of same height and same section is examined assuming negligible deformation for the substructure and the superstructure. New relationships for the prediction of the bridge rocking motion are derived, including the equation of motion and the restitution coefficient at each impact at the rocking interfaces. The bridge structure is found to be susceptible to a failure mode related to the failure of the abutment-backfill system, which can occur prior to the well-known overturning of the rocking piers. Thus, a new failure spectrum is proposed called Failure Minimum Acceleration Spectrum (FMAS) which extends the overturning spectrum put forward in previous studies, and it differs in principle from the latter. The comparison with the dynamic response of bridges modelled as rocking frames without abutments reveals not only that seat-type abutments and their backfill have a generally beneficial effect on the seismic performance of rocking pier bridges by suppressing the free rocking motion of the frame system, but also that the simple frame model cannot capture all salient features of the rocking bridge response as it misses potential failure modes, overestimating the rocking bridge's safety when these modes are critical. 相似文献