共查询到20条相似文献，搜索用时 91 毫秒
1.
Failure of masonry structures generally occurs via specific collapse mechanisms which have been well documented. Using rocking dynamics, equations of motion have been derived for a number of different failure mechanisms ranging from the simple overturning of a single block to more complicated mechanisms. However, most of the equations of motion derived thus far assume that the structures can be modelled as rigid bodies rocking on rigid interfaces with an infinite compressive strength—which is not always the case. In fact, crushing of masonry—commonly observed in larger scale constructions and vertically restrained walls—can lead to a reduction in the dynamic capacity of these structures. This paper rederives the rocking equation of motion to account for the influence of flexible interfaces, characterized by a specific interface stiffness as well as finite compressive strength. The interface now includes a continually shifting rotation point, the location of which depends not only on the material properties of the interface but also on its geometry. Expressions have thus also been derived for interfaces of different geometries, and parametric studies conducted to gauge their influence on dynamic response. The new interface formulations are also implemented within a new analytical modelling tool that provides a novel approach to the dynamic analysis of masonry collapse mechanisms. Finally, this tool is exemplified, along with the importance of the interface formulation, by evaluating the collapse of the Dharahara Tower in Kathmandu, which was almost completely destroyed during the 2015 Gorkha earthquake. 相似文献
2.
This paper is concerned with the superficial similarities and fundamental differences between the oscillatory response of a single‐degree‐of‐freedom (SDOF) oscillator (regular pendulum) and the rocking response of a slender rigid block (inverted pendulum). The study examines the distinct characteristics of the rocking spectrum and compares the observed trends with those of the response spectrum. It is shown that the rocking spectrum reflects kinematic characteristics of the ground motions that are not identifiable by the response spectrum. The paper investigates systematically the fundamental differences in the dynamical structure of the two systems of interest and concludes that rocking structures cannot be replaced by ‘equivalent’ SDOF oscillators. The study proceeds by examining the validity of a simple, approximate design methodology, initially proposed in the late 1970s and now recommended in design guidelines to compute rotations of slender structures by performing iteration either on the true displacement response spectrum or design spectrum. This paper shows that the simple design approach is inherently flawed and should be abandoned, in particular for smaller, less‐slender blocks. The study concludes that the exact rocking spectrum emerges as a distinct intensity measure of ground motions. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
3.
A new finite element model to analyze the seismic response of deformable rocking bodies and rocking structures is presented. The model comprises a set of beam elements to represent the rocking body and zero‐length fiber cross‐section elements at the ends of the rocking body to represent the rocking surfaces. The energy dissipation during rocking motion is modeled using a Hilber–Hughes–Taylor numerically dissipative time step integration scheme. The model is verified through correct prediction of the horizontal and vertical displacements of a rigid rocking block and validated against the analytical Housner model solution for the rocking response of rigid bodies subjected to ground motion excitation. The proposed model is augmented by a dissipative model of the ground under the rocking surface to facilitate modeling of the rocking response of deformable bodies and structures. The augmented model is used to compute the overturning and uplift rocking response spectra for a deformable rocking frame structure to symmetric and anti‐symmetric Ricker pulse ground motion excitation. It is found that the deformability of the columns of a rocking frame does not jeopardize its stability under Ricker pulse ground motion excitation. In fact, there are cases where a deformable rocking frame is more stable than its rigid counterpart. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
4.
Strong shaking of structures during large earthquakes may result in some cases in partial separation of the base of the structure from the foundation. A simplified problem of this type, the dynamic response of a rocking rigid block allowed to uplift, is examined here. Two foundation models are considered: the Winkler foundation and the much simpler ‘two-spring’ foundation. It is shown that an equivalence between these two models can be established, so that one can work with the much simpler two-spring foundation. Simple solutions of the equations of motion are developed and simplified methods of analysis are proposed. In general, uplift leads to a softer vibrating system which behaves non-linearly, although the response is composed of a sequence of linear responses. As a result the apparent rocking period increases with the amount of lift-off. The corresponding apparent ratio of critical damping decreases, in general, with the amplitude of the response. Compared to the case without lift-off, the response of the system may increase or decrease because of the uplift, depending on the excitation and the parameters of the system. 相似文献
5.
The seismic behaviour of a wide variety of structures can be characterized by the rocking response of rigid blocks. Nevertheless, suitable seismic control strategies are presently limited and consist mostly on preventing rocking motion all together, which may induce undesirable stress concentrations and lead to impractical interventions. In this paper, we investigate the potential advantages of using supplemental rotational inertia to mitigate the effects of earthquakes on rocking structures. The newly proposed strategy employs inerters, which are mechanical devices that develop resisting forces proportional to the relative acceleration between their terminals and can be combined with a clutch to ensure their rotational inertia is only employed to oppose the motion. We demonstrate that the inclusion of the inerter effectively reduces the frequency parameter of the block, resulting in lower rotation seismic demands and enhanced stability due to the well-known size effects of the rocking behaviour. The effects of the inerter and inerter-clutch devices on the response scaling and similarity are also studied. An examination of their overturning fragility functions reveals that inerter-equipped structures experience reduced probabilities of overturning in comparison with uncontrolled bodies, while the addition of a clutch further improves their seismic stability. The concept advanced in this paper is particularly attractive for the protection of rocking bodies as it opens the possibility of nonlocally modifying the dynamic response of rocking structures without altering their geometry. 相似文献
6.
Dynamic response analysis of solitary flexible rocking bodies: modeling and behavior under pulse‐like ground excitation 
下载免费PDF全文
下载免费PDF全文 Results obtained for rigid structures suggest that rocking can be used as seismic response modification strategy. However, actual structures are not rigid: structural elements where rocking is expected to occur are often slender and flexible. Modeling of the rocking motion and impact of flexible bodies is a challenging task. A non‐linear elastic viscously damped zero‐length spring rocking model, directly usable in conventional finite element software, is presented in this paper. The flexible rocking body is modeled using a conventional beam‐column element with distributed masses. This model is verified by comparing its pulse excitation response to the corresponding analytical solution and validated by overturning analysis of rocking blocks subjected to a recorded ground motion excitation. The rigid rocking block model provides a good approximation of the seismic response of solitary flexible columns designed to uplift when excited by pulse‐like ground motions. Guidance for development of rocking column models in ordinary finite element software is provided. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
7.
The rocking response of large flexible structures to earthquakes 总被引：1，自引：0，他引：1
The rocking response of structures subjected to strong ground motions is a problem of ‘several scales’. While small structures are sensitive to acceleration pulses acting successively, large structures are more significantly affected by coherent low frequency components of ground motion. As a result, the rocking response of large structures is more stable and orderly, allowing effective isolation from the ground without imminent danger of overturning. This paper aims to characterize and predict the maximum rocking response of large and flexible structures to earthquakes using an idealized structural model. To achieve this, the maximum rocking demand caused by different earthquake records was evaluated using several ground motion intensity measures. Pulse-type records which typically have high peak ground velocity and lower frequency content caused large rocking amplitudes, whereas non-pulse type records caused random rocking motion confined to small rocking amplitudes. Coherent velocity pulses were therefore identified as the primary cause of significant rocking motion. Using a suite of pulse-type ground motions, it was observed that idealized wavelets fitted to velocity pulses can adequately describe the rocking response of large structures. Further, a parametric analysis demonstrates that pulse shape parameters affect the maximum rocking response significantly. Based on these two findings, a probabilistic analysis method is proposed for estimating the maximum rocking demand to pulse-type earthquakes. The dimensionless demand maps, produced using these methods, have predictive power in the near-field provided that pulse period and amplitude can be estimated a priori. Use of this method within a probabilistic seismic demand analysis framework is briefly discussed. 相似文献
8.
Numerous structures uplift under the influence of strong ground motion. Although many researchers have investigated the effects of base uplift on very stiff (ideally rigid) structures, the rocking response of flexible structures has received less attention. Related practical analysis methods treat these structures with simplified ‘equivalent’ oscillators without directly addressing the interaction between elasticity and rocking. This paper addresses the fundamental dynamics of flexible rocking structures. The nonlinear equations of motion, derived using a Lagrangian formulation for large rotations, are presented for an idealized structural model. Particular attention is devoted to the transition between successive phases; a physically consistent classical impact framework is utilized alongside an energy approach. The fundamental dynamic properties of the flexible rocking system are compared with those of similar linear elastic oscillators and rigid rocking structures, revealing the distinct characteristics of flexible rocking structures. In particular, parametric analysis is performed to quantify the effect of elasticity on uplift, overturning instability, and harmonic response, from which an uplifted resonance emerges. The contribution of stability and strength to the collapse of flexible rocking structures is discussed. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
9.
Allowing structures to uplift modifies their seismic response; uplifting works as a mechanical fuse and limits the forces transmitted to the superstructure. However, engineers are generally reluctant to construct an unanchored structure because the system could overturn due to lacking redundancy. Using a safety factor for the design of a flat rocking foundation, ie, designing it wider, goes against the main idea of this seismic modification method as the force demand for the structure increases. We propose to extend the flat base of a rocking block with curved extensions to better protect the block from overturning, yet not prevent its uplifting. After investigating the seismic response of such rocking blocks, we extend the study to investigate the seismic response of rolling and rocking frames comprising columns with curved base extensions. The equations of motion are derived, time history analyses are performed, and rocking spectra are constructed. We draw two important conclusions: (a) the response of a class of rocking oscillators with curved base extensions is equivalent to the response of a flat-base rocking oscillators of the same slenderness, yet larger size; (b) the rotation demand on two negative stiffness rocking and rolling oscillators with the same uplifting acceleration and the same size is roughly the same as long as the rocking oscillators are not close to overturning. The above findings can serve as a basis for the rational seismic design of structures supported on rocking columns with curved bases, a system that has been used since the 1960s. 相似文献
10.
A new modeling for the seismic response assessment of free-standing, rigid or flexible, pure rocking systems is presented. The proposed modeling is based on equivalent single degree-of-freedom (SDOF) oscillators that can be implemented with common engineering software or user-made structural analysis codes. The SDOF models adopted use beam elements that are connected to a nonlinear rotational spring with negative stiffness that describes the self-centering capacity of the rocking member. The loss of energy at impact is treated with an “event-based” approach consistent with Housner's theory. Different variations pertinent to rigid blocks are first presented, and then the concept is extended to the flexible case. The implementation of the method requires some minor programming skills, while thanks to the versatility of the finite element method, it is capable to handle a variety of rocking problems. This is demonstrated with two applications: (a) a vertically restrained block equipped with an elastic tendon and (b) a rigid block coupled with an elastic SDOF oscillator. The accuracy and the efficiency of the proposed modeling is demonstrated using simple wavelets and historical ground motion records. 相似文献
11.
The stochastic rocking of a rigid block due to shaking of its foundation is examined. The foundation is flexible (Winkler) and its independent springs and dashpots separate from the block base when tension is incipient. Modulated white noise is used as a model of horizontal acceleration of the foundation. The statistics of the rocking response are found by an analytical procedure which involves a combination of static condensation and stochastic linearization. The analytical solution is computationally efficient and compares well with pertinent data obtained by numerical simulations. 相似文献
12.
In this paper the rocking response of slender/rigid structures stepping on a viscoelastic foundation is revisited. The study examines in depth the motion of the system with a non‐linear analysis that complements the linear analysis presented in the past by other investigators. The non‐linear formulation combines the fully non‐linear equations of motion together with the impulse‐momentum equations during impacts. The study shows that the response of the rocking block depends on the size, shape and slenderness of the block, the stiffness and damping of the foundation and the energy loss during impact. The effect of the stiffness and damping of the foundation system along with the influence of the coefficient of restitution during impact is presented in rocking spectra in which the peak values of the response are compared with those of the rigid block rocking on a monolithic base. Various trends of the response are identified. For instance, less slender and smaller blocks have a tendency to separate easier, whereas the smaller the angle of slenderness, the less sensitive the response to the flexibility, damping and coefficient of restitution of the foundation. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
13.
Klaus-G. Hinzen 《Journal of Seismology》2012,16(4):797-814
Vertically oriented objects, such as tombstones, monuments, columns, and stone lanterns, are often observed to shift and rotate during earthquake ground motion. Such observations are usually limited to the mesoseismal zone. Whether near-field rotational ground motion components are necessary in addition to pure translational movements to explain the observed rotations is an open question. We summarize rotation data from seven earthquakes between 1925 and 2009 and perform analog and numeric rotation testing with vertically oriented objects. The free-rocking motion of a marble block on a sliding table is disturbed by a pulse in the direction orthogonal to the rocking motion. When the impulse is sufficiently strong and occurs at the ‘right’ moment, it induces significant rotation of the block. Numeric experiments of a free-rocking block show that the initiation of vertical block rotation by a cycloidal acceleration pulse applied orthogonal to the rocking axis depends on the amplitude of the pulse and its phase relation to the rocking cycle. Rotation occurs when the pulse acceleration exceeds the threshold necessary to provoke rocking of a resting block, and the rocking block approaches its equilibrium position. Experiments with blocks subjected to full 3D strong motion signals measured during the 2009 L’Aquila earthquake confirm the observations from the tests with analytic ground motions. Significant differences in the rotational behavior of a monolithic block and two stacked blocks exist. 相似文献
14.
The classical problem of rocking of a rigid, free-standing block to earthquake ground shaking containing distinct pulses, as is the case of near-fault earthquake motions, is revisited. A rectangular block resting on a rigid base is considered, subjected to a range of idealized single-lobe ground acceleration pulses expressed by a generalized function controlled by a single shape parameter. The problem is treated analytically in the realm of the linearized equations of motion under the assumption of slender block geometry and rocking without slipping. Peak rocking response and overturning criteria for different waveforms are presented in terms of dimensionless closed-form expressions and graphs. Two parameters are employed to this end: dimensionless pulse duration f (i.e., actual pulse duration times characteristic block frequency) and dimensionless uplift strength η (i.e., ratio of minimum required acceleration for initiation of uplift over peak pulse acceleration). The linearized response is compared analytically with the fully non-linear one using an ad hoc energy formulation leading to an approximate closed-form solution. It is shown that the non-linear equations of motion yield more stable response than their linearized counterparts. A brief discussion on scaling laws is provided. 相似文献
15.
Systems of unattached, or freestanding, structures are highly vulnerable to damage and/or collapse during an earthquake, as evidenced during numerous past events. This class of structural system includes statue–pedestal systems, multidrum columns, radiation shields, unreinforced masonry walls, and other mechanical and electrical equipment. While a number of studies have analyzed the response of the single rocking block, very few have tested the response of multiple block systems subjected to earthquakes. Therefore, this paper details an extensive shake table testing campaign in which the seismic response of a pair of stiff, unattached blocks, herein referred to as a dual‐body system, was evaluated. Experimental variables include the geometry, including asymmetry, of both top (tower) and bottom (pedestal) bodies, input motion, and the coefficient of friction beneath the system. Furthermore, the tower structures were tested both in dual‐body configurations as well as in single‐body configurations allowing an understanding of the effect of the pedestal. The tests indicate that the presence of a pedestal increases the likelihood of collapse and amplitude of rocking demands, in general. However, certain geometric and interface combinations yield a more stable tower in a dual‐body configuration compared to a single‐body configuration, because of the dependence of the pedestal response on the geometry of the tower. Furthermore, a low‐friction interface beneath the pedestal reduces demands on the tower. However, this low‐friction interface may still transfer long‐period contributions of the input motion to the tower, which may be detrimental to its response. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
16.
This investigation deals with the rocking response of rigid blocks subjected to earthquake ground motion. A numerical procedure and computer program are developed to solve the non-linear equations of motion governing the rocking motion of rigid blocks on a rigid base subjected to horizontal and vertical ground motion. The response results presented show that the response of the block is very sensitive to small changes in its size and slenderness ratio and to the details of ground motion. Systematic trends are not apparent: The stability of a block subjected to a particular ground motion does not necessarily increase monotonically with increasing size or decreasing slenderness ratio. Overturning of a block by a ground motion of particular intensity does not imply that the block will necessarily overturn under the action of more intense ground motion. In contrast, systematic trends are observed when the problem is studied from a probabilistic point of view with the ground motion modelled as a random process. The probability of a block exceeding any response level, as well as the probability that a block overturns, increases with increase in ground motion intensity, increase in slenderness ratio of the block and decrease in its size. It is concluded that probabilistic estimates of the intensity of ground shaking may be obtained from its observed effects on monuments, minarets, tombstones and other similar objects provided suitable data in sufficient quantity is available, and the estimates are based on probabilistic analyses of the rocking response of rigid blocks, considering their non-linear dynamic behaviour. 相似文献
17.
Allowing flexible structures to uplift and rock during earthquakes can significantly reduce the force demands and residual displacements. However, such structures are still susceptible to large deformations and accelerations that can compromise their functionality. In this paper, we examine the dynamic response of elastic rocking oscillators and suggest that their lateral drifts and accelerations can be limited effectively by using inerter devices. To this end, we offer a detailed examination of the effects of structural flexibility on the efficiency of the proposed system. The analytical expressions governing the motion of deformable structures with base uplift are revisited to incorporate the effects of the supplemental rotational inertia. The proposed model is then used to study the structural demands of flexible rocking structures under coherent pulses as well as noncoherent real pulse-like ground motions. Our results show that combining rocking with inerters can be an efficient strategy to control the deformation and acceleration demands in uplifting flexible systems. 相似文献
18.
The seismic response of rocking frames that consist of a rigid beam freely supported on rigid freestanding rectangular piers has received recent attention in the literature. Past studies have investigated the special case where, upon planar rocking motion, the beam maintains contact with the piers at their extreme edges. However, in many real scenarios, the beam‐to‐pier contact lies closer to the center of the pier, affecting the overall stability of the system. This paper investigates the seismic response of rocking frames under the more general case which allows the contact edge to reside anywhere in‐between the center of the pier and its extreme edge. The study introduces a rocking block model that is dynamically equivalent to a rocking frame with vertically symmetric piers of any geometry. The impact of top eccentricity (ie, the distance of the contact edge from the pier's vertical axis of symmetry) on the seismic response of rocking frames is investigated under pulse excitations and earthquake records. It is concluded that the stability of a top‐heavy rocking frame is highly influenced by the top eccentricity. For instance, a rocking frame with contacts at the extreme edges of the piers can be more seismically stable than a solitary block that is identical to one of the frame's piers, while a rocking frame with contacts closer to the centers of the piers can be less stable. The concept of critical eccentricity is introduced, beyond which the coefficient of restitution contributes to a greater reduction in the response of a frame than of a solitary pier. 相似文献
19.
J. A. Bachmann M. Strand M. F. Vassiliou M. Broccardo B. Stojadinović 《地震工程与结构动力学》2018,47(2):535-552
An argument of engineers and researchers against the use of rocking as a seismic response modification technique is that the rocking motion of a structure is chaotic and the existing models are incapable of predicting it well. This argument is supported by the documented inability of rocking models to predict the motion of a specimen excited by a single ground motion. A statistical comparison of the experimental and the numerical responses of a rigid rocking oscillator not to a specific ground motion, but to ensembles of ground motions that have the same statistical properties, is presented. It is shown that the simple analytical model proposed by Housner in 1963 is capable of predicting the statistics of seismic response of a rigid rocking oscillator. 相似文献
20.
This paper characterizes the ability of natural ground motions to induce rocking demands on rigid structures. In particular, focusing on rocking blocks of different size and slenderness subjected to a large number of historic earthquake records, the study unveils the predominant importance of the strong‐motion duration to rocking amplification (ie, peak rocking response without overturning). It proposes original dimensionless intensity measures (IMs), which capture the total duration (or total impulse accordingly) of the time intervals during which the ground motion is capable of triggering rocking motion. The results show that the proposed duration‐based IMs outperform all other examined (intensity, frequency, duration, and/or energy‐based) scalar IMs in terms of both “efficiency” and “sufficiency.” Further, the pertinent probabilistic seismic demand models offer a prediction of the peak rocking demand, which is adequately “universal” and of satisfactory accuracy. Lastly, the analysis shows that an IM that “efficiently” captures rocking amplification is not necessarily an “efficient” IM for predicting rocking overturning, which is dominated by the velocity characteristics (eg, peak velocity) of the ground motion. 相似文献