首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The efficacy of various ground motion intensity measures (IMs) in the prediction of spatially distributed seismic demands (engineering demand parameters, (EDPs)) within a structure is investigated. This has direct implications to building‐specific seismic loss estimation, where the seismic demand on different components is dependent on the location of the component in the structure. Several common IMs are investigated in terms of their ability to predict the spatially distributed demands in a 10‐storey office building, which is measured in terms of maximum interstorey drift ratios and maximum floor accelerations. It is found that the ability of an IM to efficiently predict a specific EDP depends on the similarity between the frequency range of the ground motion that controls the IM and that of the EDP. An IMs predictability has a direct effect on the median response demands for ground motions scaled to a specified probability of exceedance from a ground motion hazard curve. All of the IMs investigated were found to be insufficient with respect to at least one of magnitude, source‐to‐site distance, or epsilon when predicting all peak interstorey drifts and peak floor accelerations in a 10‐storey reinforced concrete frame structure. Careful ground motion selection and/or seismic demand modification is therefore required to predict such a spatially distributed demands without significant bias. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

2.
The rocking response of large flexible structures to earthquakes   总被引：1，自引：0，他引：1  
The rocking response of structures subjected to strong ground motions is a problem of ‘several scales’. While small structures are sensitive to acceleration pulses acting successively, large structures are more significantly affected by coherent low frequency components of ground motion. As a result, the rocking response of large structures is more stable and orderly, allowing effective isolation from the ground without imminent danger of overturning. This paper aims to characterize and predict the maximum rocking response of large and flexible structures to earthquakes using an idealized structural model. To achieve this, the maximum rocking demand caused by different earthquake records was evaluated using several ground motion intensity measures. Pulse-type records which typically have high peak ground velocity and lower frequency content caused large rocking amplitudes, whereas non-pulse type records caused random rocking motion confined to small rocking amplitudes. Coherent velocity pulses were therefore identified as the primary cause of significant rocking motion. Using a suite of pulse-type ground motions, it was observed that idealized wavelets fitted to velocity pulses can adequately describe the rocking response of large structures. Further, a parametric analysis demonstrates that pulse shape parameters affect the maximum rocking response significantly. Based on these two findings, a probabilistic analysis method is proposed for estimating the maximum rocking demand to pulse-type earthquakes. The dimensionless demand maps, produced using these methods, have predictive power in the near-field provided that pulse period and amplitude can be estimated a priori. Use of this method within a probabilistic seismic demand analysis framework is briefly discussed.  相似文献   

3.
Probabilistic seismic demand models are a common and often essential step in generating analytical fragility curves for highway bridges. With these probabilistic models being traditionally conditioned on a single seismic intensity measure (IM), the degree of uncertainty in the models is dependent on the IM used. Selection of an optimal IM for conditioning these demand models is not a trivial matter and has been the focus of numerous studies. Unlike previous studies that consider a single structure for IM selection, this study evaluates optimal IMs for use when generating probabilistic seismic demand models for bridge portfolios such as would be found in HAZUS‐MH. Selection criteria such as efficiency, practicality, sufficiency, and hazard computability are considered in the selection process. A case study is performed considering the multi‐span simply supported steel girder bridge class. Probabilistic seismic demand models are generated considering variability in the geometric configurations and material properties, using two suites of ground motions—one synthetic and one recorded motion suite. Results show that of the 10 IMs considered, peak ground acceleration (PGA) and spectral acceleration at the fundamental period are the most optimal for the synthetic motions, and that cumulative absolute velocity is also a close contender when using recorded motions. However, when hazard computability is considered, PGA is selected as the IM of choice. Previous studies have shown that spectrally based quantities perform better than PGA for a given structure, but the findings of this study indicate that when a portfolio of bridges is considered, PGA should be used. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

4.
  相似文献   

5.
A fundamental issue in the framework of seismic probabilistic risk analysis is the choice of ground motion intensity measures (IMs). Based on the floor response spectrum method, the present contribution focuses on the ability of IMs to predict non‐structural components (NSCs) horizontal acceleration demand. A large panel of IMs is examined and a new IM, namely equipment relative average spectral acceleration (E‐ASAR), is proposed for the purpose of NSCs acceleration demand prediction. The IMs efficiency and sufficiency comparisons are based on (i) the use of a large dataset of recorded earthquake ground motions; (ii) numerical analyses performed on three‐dimensional numerical models, representing actual structural wall and frame buildings; and (iii) systematic statistical analysis of the results. From the comparative study, the herein introduced E‐ASAR shows high efficiency with respect to the estimation of maximum floor response spectra ordinates. Such efficiency is particularly remarkable in the case of structural wall buildings. Besides, the sufficiency and the simple formulation allowing the use of existing ground motion prediction models make the E‐ASAR a promising IMs for seismic probabilistic risk assessment. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

6.
A companion paper has investigated the effects of intensity measure (IM) selection in the prediction of spatially distributed response in a multi‐degree‐of‐freedom structure. This paper extends from structural response prediction to performance assessment metrics such as probability of structural collapse; probability of exceeding a specified level of demand or direct repair cost; and the distribution of direct repair loss for a given level of ground motion. In addition, a method is proposed to account for the effect of varying seismological properties of ground motions on seismic demand that does not require different ground motion records to be used for each intensity level. Results illustrate that the conventional IM, spectral displacement at the first mode, Sde(T1), produces higher risk estimates than alternative velocity‐based IM's, namely spectrum intensity, SI, and peak ground velocity, PGV, because of its high uncertainty in ground motion prediction and poor efficiency in predicting peak acceleration demands. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

7.
In this paper, the generalised conditional intensity measure (GCIM) method is extended to ground motion selection for scenario earthquake ruptures. The selection algorithm is based on generating random realisations of the considered intensity measure (IM) distributions for a specific rupture scenario and then finding the prospective ground motions that best fit the realisations using an optimal amplitude scale factor. Using different rupture scenarios and site conditions, two important aspects of the GCIM methodology are scrutinised: (i) different weight vectors for the various IMs considered and (ii) quantifying the importance of replicate selections for ensembles with different numbers of desired ground motions. It is demonstrated that considering only spectral acceleration (SA) ordinates in the selection process, as is common in many conventional selection procedures, may result in selected motions with a biased representation for duration and cumulative ground motion effects. In contrast, considering IMs other than SA ordinates (in particular, significant duration, cumulative absolute velocity, and Arias intensity) results in ensembles with an appropriate representation of these IMs, without a practically significant effect on SA ordinates. The benefit of conducting replicate selections to obtain a suite of motions with an improved representation for the distribution of the considered IMs is demonstrated, and a minimum number of replicates are suggested for different ground motion ensemble sizes. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

8.
Scalar and vector intensity measures are developed for the efficient estimation of limit‐state capacities through incremental dynamic analysis (IDA) by exploiting the elastic spectral shape of individual records. IDA is a powerful analysis method that involves subjecting a structural model to several ground motion records, each scaled to multiple levels of intensity (measured by the intensity measure or IM), thus producing curves of structural response parameterized by the IM on top of which limit‐states can be defined and corresponding capacities can be calculated. When traditional IMs are used, such as the peak ground acceleration or the first‐mode spectral acceleration, the IM‐values of the capacities can display large record‐to‐record variability, forcing the use of many records to achieve reliable results. By using single optimal spectral values as well as vectors and scalar combinations of them on three multistorey buildings significant dispersion reductions are realized. Furthermore, IDA is extended to vector IMs, resulting in intricate fractile IDA surfaces. The results reveal the most influential spectral regions/periods for each limit‐state and building, illustrating the evolution of such periods as the seismic intensity and the structural response increase towards global collapse. The ordinates of the elastic spectrum and the spectral shape of each individual record are found to significantly influence the seismic performance and they are shown to provide promising candidates for highly efficient IMs. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

9.
This short communication introduces a quantitative approach for the engineering validation of ground‐motion simulations based on information theory concepts and statistical hypothesis testing. Specifically, we use the Kullback‐Leibler divergence to measure the similarity of the probability distributions of recorded and simulated ground‐motion intensity measures (IMs). We demonstrate the application of the proposed validation approach to ground‐motion simulations computed by using a variety of methods, including Graves and Pitarka hybrid broadband, the deterministic composite source model, and a stochastic white noise finite‐fault model. Ground‐motion IMs, acting as proxies for the (nonlinear) seismic response of more complex engineered systems, are considered herein to validate the considered ground‐motion simulation methods. The list of considered IMs includes both spectral‐shape and duration‐related proxies, shown to be the optimal IMs in several probabilistic seismic demand models of different structural types, within the framework of performance‐based earthquake engineering. The proposed validation exercise (1) can highlight the similarities and differences between simulated and recorded ground motions for a given simulation method and/or (2) allow the ranking of the performance of alternative simulation methods. The similarities between records and simulations should provide confidence in using the simulation method for engineering applications, while the discrepancies should help in improving the tested method for the generation of synthetic records.  相似文献   

10.
The uncertainty in the seismic demand of a structure (referred to as the engineering demand parameter, EDP) needs to be properly characterized in performance‐based earthquake engineering. Uncertainties in the ground motion and in structural properties are responsible for EDP uncertainty. In this study, sensitivity of EDPs to major uncertain variables is investigated using the first‐order second‐moment method for a case study building. This method is shown to be simple and efficient for estimating the sensitivity of seismic demand. The EDP uncertainty induced by each uncertain variable is used to determine which variables are most significant. Results show that the uncertainties in ground motion are more significant for global EDPs, namely peak roof acceleration and displacement, and maximum inter‐storey drift ratio, than those in structural properties. Uncertainty in the intensity measure (IM) of ground motion is the dominant variable for uncertainties in local EDPs such as the curvature demand at critical cross‐sections. Conditional sensitivity of global and local EDPs given IM is also estimated. It is observed that the combined effect of uncertainties in structural properties is more significant than uncertainty in ground motion profile at lower IM levels, while the opposite is true at higher IM levels. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

11.
在基于性能的地震工程学(PBEE)中,建立概率地震需求模型(PSDM)时需要对桥梁结构的工程需求参数(EDP)进行概率估计。其中,强地面运动参数(IM)的选择对EDP的概率估计影响很大,因此需要正确选择IM。分别采用目前最广泛使用的结构第一模态周期弹性谱加速度(5%阻尼比)Sa(T1,5%)和峰值地面加速度PGA作为IM,选择实际地震波并进行合理的调值,对一座钢筋混凝土桥墩进行IDA分析,其计算结果表明:对于不同性质EDP的概率估计值,以PGA作为IM计算所得的结果明显偏于非保守,且离散度一般也更大。说明可以针对不同性质的EDP,根据地面运动强度的大小,选择不同的IM,通过合理的调值对EDP进行概率估计,可以更加精确、高效地建立PSDM。  相似文献   

12.
Earthquake‐induced slope displacement is an important parameter for safety evaluation and earthquake design of slope systems. Traditional probabilistic seismic hazard analysis usually focuses on evaluating slope displacement at a particular location, and it is not suitable for spatially distributed slopes over a large region. This study proposes a computationally efficient framework for fully probabilistic seismic displacement analysis of spatially distributed slope systems using spatially correlated vector intensity measures (IMs). First, a spatial cross‐correlation model for three key ground motion IMs, that is, peak ground acceleration (PGA), Arias intensity, and peak ground velocity, is developed using 2686 ground motion recordings from 11 recent earthquakes. To reduce the computational cost, Monte Carlo simulation and data reduction techniques are utilized to generate spatially correlated random fields for the vector IMs. The slope displacement hazards over the region are further quantified using empirical predictive equations. Finally, an illustrative example is presented to highlight the importance of the spatial correlation and the advantage of using spatially correlated vector IMs in seismic hazard analysis of spatially distributed slopes. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

13.
To estimate the demand of structures, investigating the correlation between engineering demand parameters and intensity measures (IMs) is of prime importance in performance-based earthquake engineering. In the present paper, the efficiency and sufficiency of some IMs for evaluating the seismic response of buried steel pipelines are investigated. Six buried pipe models with different diameter to thickness and burial depth to diameter ratios, and different soil properties are subjected to an ensemble of 30 far-field earthquake ground motion records. The records are scaled to several intensity levels and a number of incremental dynamic analyses are performed. The approach used in the analyses is finite element modeling. Pipes are modeled using shell elements while equivalent springs and dashpots are used for modeling the soil. Several ground motion intensity measures are used to investigate their efficiency and sufficiency in assessing the seismic demand and capacity of the buried steel pipelines in terms of engineering demand parameter measured by the peak axial compressive strain at the critical section of the pipe. Using the regression analysis, efficient and sufficient IMs are proposed for two groups of buried pipelines separately. The first one is a group of pipes buried in soils with low stiffness and the second one is those buried in soils with higher stiffness. It is concluded that for the first group of pipes, \(\sqrt {{\text{VSI}}[\upomega_{1} ({\text{PGD}} + {\text{RMS}}_{\text{d}} )]}\) followed by root mean square of displacement (RMSd) are the optimal IMs based on both efficiency and sufficiency; and for the second group, the only optimal IM is PGD2/RMSd.  相似文献   

14.
The capacity of a gravity structure to counter seismically induced overturning can only be estimated with good accuracy using a dynamic analysis of the rotational (rocking) motion involving large displacement theory. Seismic assessment employing quasi‐static analysis can be overly conservative if the reserve capacity of this type of rocking structure to displace without overturning is not taken into account. It was revealed through dynamic testing on a shaking table that the overturning hazards of ground shaking are best represented by the peak displacement demand (PDD) parameter and that the vulnerability to overturning instability decreases with the increasing size of the object when the aspect ratio is held constant. This finding has important implications on the engineering of structures for countering moderate ground shaking in regions of low and moderate seismicity. Experimental data were validated and supplemented by computer simulations that involved generating artificial accelerograms of designated earthquake scenarios and non‐linear time‐history analyses of the overturning motions. Based on these simulations, fragility curves were constructed for estimating the probability of overturning for given levels of PDD and for different specimen dimensions. An expression was developed for estimating the level of PDD required to overturn rectangular objects of given dimensions for 5% probability of exceedance. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

15.
The effect of peak ground velocity (PGV) on single‐degree‐of‐freedom (SDOF) deformation demands and for certain ground‐motion features is described by using a total of 60 soil site records with source‐to‐site distances less than 23 km and moment magnitudes between 5.5 and 7.6. The observations based on these records indicate that PGV correlates well with the earthquake magnitude and provides useful information about the ground‐motion frequency content and strong‐motion duration that can play a role on the seismic demand of structures. The statistical results computed from non‐linear response history analyses of different hysteretic models highlight that PGV correlates better with the deformation demands with respect to other ground motion intensity measures. The choice of PGV as ground motion intensity decreases the dispersion due to record‐to‐record variability of SDOF deformation demands, particularly in the short period range. The central tendencies of deformation demands are sensitive to PGV and they may vary considerably as a function of the hysteretic model and structural period. The results provided in this study suggest a consideration of PGV as a stable candidate for ground motion intensity measure in simplified seismic assessment methods that are used to estimate structural performance for earthquake hazard analysis. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

16.
The influence of vertical ground motions on the seismic response of highway bridges is not very well understood. Recent studies suggest that vertical ground motions can substantially increase force and moment demands on bridge columns and girders and cannot be overlooked in seismic design of bridge structures. For an evaluation of vertical ground motion effects on the response of single‐bent two‐span highway bridges, a systematic study combining the critical engineering demand parameters (EDPs) and ground motion intensity measures (IMs) is required. Results of a parametric study examining a range of highway bridge configurations subjected to selected sets of horizontal and vertical ground motions are used to determine the structural parameters that are significantly amplified by the vertical excitations. The amplification in these parameters is modeled using simple equations that are functions of horizontal and vertical spectral accelerations at the corresponding horizontal and vertical fundamental periods of the bridge. This paper describes the derivation of seismic demand models developed for typical highway overcrossings by incorporating critical EDPs and combined effects of horizontal and vertical ground motion IMs depending on the type of the parameter and the period of the structure. These models may be used individually as risk‐based design tools to determine the probability of exceeding the critical levels of EDP for pre‐determined levels of ground shaking or may be included explicitly in probabilistic seismic risk assessments. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

17.
The overturning fragilities of symmetric and asymmetric freestanding blocks, ranging in height from 0.54 to 3.6 m and with height‐to‐width ratios ranging from 2.1 to 6.6, are determined numerically. A probabilistic formulation regularizes the overturning responses when exposed to earthquake‐like random‐vibration waveforms. The peak amplitude of the forcing excitation (peak ground acceleration or PGA) is parameterized as a function of the block size, block shape, overturning probability, and either the PGA normalized peak ground velocity (PGV/PGA), spectral acceleration at 1 s (Sa(1)/PGA), or spectral acceleration at 2 s (Sa(2)/PGA). These later intensity measures are correlated with the duration of the predominant acceleration pulse. The overturning fragilities are compared with shake table experiments using blocks ranging in height from ～0.2 to 1.2 m and with height‐to‐width ratios ranging from ～2 to 10. Excitations utilized in the shake table experiments include recordings of the 1979 Imperial Valley, 1985 Michoacan, 1999 Duzce, 1999 Chi‐Chi, and 2002 Denali Earthquakes along with synthetic waveforms. The overturning fragilities accurately represent the overturning responses of blocks with simple basal contact conditions. Objects with multiple rocking points, such as precariously balanced rocks, are more fragile than predicted. Nondestructive tilting tests are used to account for blocks with complex basal contact conditions, demonstrating that these blocks overturn similarly to more slender blocks with simple contact conditions. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

18.
Vector-valued fragility functions for seismic risk evaluation   总被引：4，自引：4，他引：0  
This article presents a method for the development of vector-valued fragility functions, which are a function of more than one intensity measure (IM, also known as ground-motion parameters) for use within seismic risk evaluation of buildings. As an example, a simple unreinforced masonry structure is modelled using state-of-the-art software and hundreds of nonlinear time-history analyses are conducted to compute the response of this structure to earthquake loading. Dozens of different IMs (e.g. peak ground acceleration and velocity, response spectral accelerations at various periods, Arias intensity and various duration and number of cycle measures) are considered to characterize the earthquake shaking. It is demonstrated through various statistical techniques (including Receiver Operating Characteristic analysis) that the use of more than one IM leads to a better prediction of the damage state of the building than just a single IM, which is the current practice. In addition, it is shown that the assumption of the lognormal distribution for the derivation of fragility functions leads to more robust functions than logistic, log-logistic or kernel regression. Finally, actual fragility surfaces using two pairs of IMs (one pair are uncorrelated while the other are correlated) are derived and compared to scalar-based fragility curves using only a single IM and a significant reduction in the uncertainty of the predicted damage level is observed. This type of fragility surface would be a key component of future risk evaluations that take account of recent developments in seismic hazard assessment, such as vector-valued probabilistic seismic hazard assessments.  相似文献   

19.
A spectral-velocity-based combination-type ground motion intensity measure (IM), which is inspired by the superior sensitivity of spectral velocity to structural response compared with other two spectral quantities, is proposed for super high-rise building structures with the consideration of the characteristics of ground motions and structures themselves. Two super high-rise buildings with typical frame/core-tube/outrigger lateral resisting system and a wide range of structural height (H = 258 m~660 m) are deliberately selected to identify the correlation between the maximum inter-story drift ratio and nineteen IMs developed in recent decade together with the proposed IM, with sixty chosen far-field and near-field pulse-like ground motions. With the suggested optimal number of lower vibration modes and corresponding combination factors, the efficiency, sufficiency and the scaling robustness of the proposed IM is further demonstrated. In addition, the relative sufficiency measures of other IMs with respect to the proposed IM are investigated. The results from the study indicate that, the proposed IM is believed, from the standpoint of efficiency, sufficiency, relative sufficiency measure and scaling robustness, to be a more specialized and desirable tool for super high-rise buildings, either for far-field or near-field ground motions.  相似文献   

20.
The use of a seismic intensity measure (IM) is paramount in decoupling seismic hazard and structural response estimation when assessing the performance of structures. For this to be valid, the IM needs to be sufficient;that is, the engineering demand parameter (EDP) response should be independent of other ground motion characteristics when conditioned on the IM. Whenever non‐trivial dependence is found, such as in the case of the IM being the first‐mode spectral acceleration, ground motion selection must be employed to generate sets of ground motion records that are consistent vis‐à‐vis the hazard conditioned on the IM. Conditional spectrum record selection is such a method for choosing records that are consistent with the site‐dependent spectral shape conditioned on the first‐mode spectral acceleration. Based on a single structural period, however the result may be suboptimal, or insufficient, for EDPs influenced by different period values, for example, peak interstory drifts or peak floor accelerations at different floors, potentially requiring different record suites for each. Recently, the log‐average spectral acceleration over a period range, AvgSA, has emerged as an improved scalar IM for building response estimation whose hazard can be evaluated using existing ground motion prediction equations. Herein, we present a recasting of conditional spectrum record selection that is based on AvgSA over a period range as the conditioning IM. This procedure ensures increased efficiency and sufficiency in simultaneously estimating multiple EDPs by means of a single IM. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号