共查询到20条相似文献，搜索用时 46 毫秒
1.
The influence of interface geometry,stiffness, and crushing on the dynamic response of masonry collapse mechanisms 
下载免费PDF全文
下载免费PDF全文 Failure of masonry structures generally occurs via specific collapse mechanisms which have been well documented. Using rocking dynamics, equations of motion have been derived for a number of different failure mechanisms ranging from the simple overturning of a single block to more complicated mechanisms. However, most of the equations of motion derived thus far assume that the structures can be modelled as rigid bodies rocking on rigid interfaces with an infinite compressive strength—which is not always the case. In fact, crushing of masonry—commonly observed in larger scale constructions and vertically restrained walls—can lead to a reduction in the dynamic capacity of these structures. This paper rederives the rocking equation of motion to account for the influence of flexible interfaces, characterized by a specific interface stiffness as well as finite compressive strength. The interface now includes a continually shifting rotation point, the location of which depends not only on the material properties of the interface but also on its geometry. Expressions have thus also been derived for interfaces of different geometries, and parametric studies conducted to gauge their influence on dynamic response. The new interface formulations are also implemented within a new analytical modelling tool that provides a novel approach to the dynamic analysis of masonry collapse mechanisms. Finally, this tool is exemplified, along with the importance of the interface formulation, by evaluating the collapse of the Dharahara Tower in Kathmandu, which was almost completely destroyed during the 2015 Gorkha earthquake. 相似文献
2.
A new finite element model to analyze the seismic response of deformable rocking bodies and rocking structures is presented. The model comprises a set of beam elements to represent the rocking body and zero‐length fiber cross‐section elements at the ends of the rocking body to represent the rocking surfaces. The energy dissipation during rocking motion is modeled using a Hilber–Hughes–Taylor numerically dissipative time step integration scheme. The model is verified through correct prediction of the horizontal and vertical displacements of a rigid rocking block and validated against the analytical Housner model solution for the rocking response of rigid bodies subjected to ground motion excitation. The proposed model is augmented by a dissipative model of the ground under the rocking surface to facilitate modeling of the rocking response of deformable bodies and structures. The augmented model is used to compute the overturning and uplift rocking response spectra for a deformable rocking frame structure to symmetric and anti‐symmetric Ricker pulse ground motion excitation. It is found that the deformability of the columns of a rocking frame does not jeopardize its stability under Ricker pulse ground motion excitation. In fact, there are cases where a deformable rocking frame is more stable than its rigid counterpart. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
3.
In structural mechanics there are several occasions where a linearized formulation of the original non‐linear problem reduces considerably the computational effort for the response analysis. In a broader sense, a linearized formulation can be viewed as a first‐order expansion of the dynamic equilibrium of the system about a ‘static’ configuration; yet caution should be exercised when identifying the ‘correct’ static configuration. This paper uses as a case study the rocking response of a rigid block stepping on viscoelastic supports, whose non‐linear dynamics is the subject of the companion paper, and elaborates on the challenge of identifying the most appropriate static configuration around which a first‐order expansion will produce the most dependable results in each regime of motion. For the regime when the heel of the block separates, a revised set of linearized equations is presented, which is an improvement to the unconservative equations published previously in the literature. The associated eigenvalues demonstrate that the characteristics of the foundation do not affect the rocking motion of the block once the heel separates. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
4.
Dynamic response analysis of solitary flexible rocking bodies: modeling and behavior under pulse‐like ground excitation 下载免费PDF全文
下载免费PDF全文 Results obtained for rigid structures suggest that rocking can be used as seismic response modification strategy. However, actual structures are not rigid: structural elements where rocking is expected to occur are often slender and flexible. Modeling of the rocking motion and impact of flexible bodies is a challenging task. A non‐linear elastic viscously damped zero‐length spring rocking model, directly usable in conventional finite element software, is presented in this paper. The flexible rocking body is modeled using a conventional beam‐column element with distributed masses. This model is verified by comparing its pulse excitation response to the corresponding analytical solution and validated by overturning analysis of rocking blocks subjected to a recorded ground motion excitation. The rigid rocking block model provides a good approximation of the seismic response of solitary flexible columns designed to uplift when excited by pulse‐like ground motions. Guidance for development of rocking column models in ordinary finite element software is provided. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
5.
Rocking bodies with arbitrary interface defects: Analytical development and experimental verification 下载免费PDF全文
下载免费PDF全文 The rocking response of a rigid, freestanding block in two dimensions typically assumes perfect contact at the base of the block with instantaneous impacts at two distinct, symmetric rocking points. This paper extends the classical two‐dimensional rocking model to account for an arbitrary number of rocking points at the base representing geometric interface defects. The equations of motion of this modified rocking system are derived and presented in general terms. Energy dissipation is modeled assuming instantaneous point impacts, yielding a discrete angular velocity adjustment. Whereas this factor is always less than unity in the classical model, it is possible for this factor to exceed unity in the presented model, yielding a finite increase in the angular velocity at impact and a markedly different rotational response than the classical model predicts. The derived model and the classical model are numerically integrated and compared to the results of recent shake table tests. These comparisons show that the new model significantly enhances agreement in both peak angular displacement and motion decay. The equations of motion and the energy dissipation of the presented model are further investigated parametrically considering the size of the defect, the number of rocking points, and the aspect ratio and size of the block. 相似文献
6.
Predicting the rocking response of structures to ground motion is important for assessment of existing structures, which may be vulnerable to uplift and overturning, as well as for designs which employ rocking as a means of seismic isolation. However, the majority of studies utilize a single rocking block to characterize rocking motion. In this paper, a methodology is proposed to derive equivalence between the single rocking block and various rocking mechanisms, yielding a set of fundamental rocking parameters. Specific structures that have exact dynamic equivalence with a single rocking block, are first reviewed. Subsequently, approximate equivalence between single and multiple block mechanisms is achieved through local linearization of the relevant equations of motion. The approximation error associated with linearization is quantified for three essential mechanisms, providing a measure of the confidence with which the proposed methodology can be applied. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
7.
The seismic response of rocking frames that consist of a rigid beam freely supported on rigid freestanding rectangular piers has received recent attention in the literature. Past studies have investigated the special case where, upon planar rocking motion, the beam maintains contact with the piers at their extreme edges. However, in many real scenarios, the beam‐to‐pier contact lies closer to the center of the pier, affecting the overall stability of the system. This paper investigates the seismic response of rocking frames under the more general case which allows the contact edge to reside anywhere in‐between the center of the pier and its extreme edge. The study introduces a rocking block model that is dynamically equivalent to a rocking frame with vertically symmetric piers of any geometry. The impact of top eccentricity (ie, the distance of the contact edge from the pier's vertical axis of symmetry) on the seismic response of rocking frames is investigated under pulse excitations and earthquake records. It is concluded that the stability of a top‐heavy rocking frame is highly influenced by the top eccentricity. For instance, a rocking frame with contacts at the extreme edges of the piers can be more seismically stable than a solitary block that is identical to one of the frame's piers, while a rocking frame with contacts closer to the centers of the piers can be less stable. The concept of critical eccentricity is introduced, beyond which the coefficient of restitution contributes to a greater reduction in the response of a frame than of a solitary pier. 相似文献
8.
The seismic behaviour of a wide variety of structures can be characterized by the rocking response of rigid blocks. Nevertheless, suitable seismic control strategies are presently limited and consist mostly on preventing rocking motion all together, which may induce undesirable stress concentrations and lead to impractical interventions. In this paper, we investigate the potential advantages of using supplemental rotational inertia to mitigate the effects of earthquakes on rocking structures. The newly proposed strategy employs inerters, which are mechanical devices that develop resisting forces proportional to the relative acceleration between their terminals and can be combined with a clutch to ensure their rotational inertia is only employed to oppose the motion. We demonstrate that the inclusion of the inerter effectively reduces the frequency parameter of the block, resulting in lower rotation seismic demands and enhanced stability due to the well-known size effects of the rocking behaviour. The effects of the inerter and inerter-clutch devices on the response scaling and similarity are also studied. An examination of their overturning fragility functions reveals that inerter-equipped structures experience reduced probabilities of overturning in comparison with uncontrolled bodies, while the addition of a clutch further improves their seismic stability. The concept advanced in this paper is particularly attractive for the protection of rocking bodies as it opens the possibility of nonlocally modifying the dynamic response of rocking structures without altering their geometry. 相似文献
9.
Rocking (overturning) instability analyses of rigid blocks based on the assumption that the friction between the block and the ground is sufficiently large to exclude the effect of sliding, are reconsidered by including the effect in question. Both modes of overturning instability – without impact and after one impact – are thoroughly discussed in connection with small sliding, whose value depends on the values of kinetic (dry) friction coefficient and the external frequency excitation. Using an energy approach the analytical derivation of the nonlinear differential equations of motion of free-standing rigid blocks under one-sine ground pulse including the effect of sliding, are comprehensively established. The serious difficulties in solving this problem on one hand the change of the kinetic friction coefficient during the motion and on the other hand the reliable evaluation of the actual friction effect when rocking is included, are effectively confronted. This is achieved through a reliable approximation of an equivalent (reduced) coefficient assuming that the major part of friction takes place from the initiation of motion and terminates shortly after the onset of rocking. In cases of slender blocks closed form solutions for overturning due to simultaneous rocking–sliding without or after one impact, are conveniently derived. Among other findings, it was explored that the single block in question for small values of the external frequency (long periods of excitation) the sliding effect is beneficial (stabilizing the block), while for large values of external frequency this effect is detrimental (destabilizing the block). 相似文献
10.
Stiff, unattached structures are highly vulnerable to damage and failure during an earthquake, as evidenced following numerous past events. This class of structures encompasses a wide range of objects and systems such as electrical transformers, radiation shields, office furniture, and marble statues. The vulnerability of these objects is exacerbated when it is highly asymmetric and unattached. Although a number of studies have focused on rigid blocks, few have concentrated on blocks with asymmetric geometries. In an effort to better understand the implications of asymmetries, an extensive shake table testing campaign including more than 150 tests was conducted. These tests incorporate a systematic variation of the mass eccentricities of stiff, unattached structures. The primary modes of rocking, sliding, and twisting as well as interactive modes were recorded for the duration of numerous earthquake motions. The magnitude and direction of response are experimentally correlated with the geometric variations in the various models. These tests indicate that even for symmetric structures with uniaxial shaking, multiple modes and three‐dimensional responses are probable. Furthermore, certain asymmetric geometries exhibited both increased rocking (and overturning) as well as increased sliding when compared with their symmetric counterparts. A final aspect of this study compared the free rocking response of symmetric and asymmetric structures to classical, two‐dimensional rocking analysis. While the theoretical values for the coefficient of restitution yielded a significant overestimation in the simulation (up to ≈90%), reduced coefficients greatly improved the performance of the model. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
11.
In this paper the rocking response of slender/rigid structures stepping on a viscoelastic foundation is revisited. The study examines in depth the motion of the system with a non‐linear analysis that complements the linear analysis presented in the past by other investigators. The non‐linear formulation combines the fully non‐linear equations of motion together with the impulse‐momentum equations during impacts. The study shows that the response of the rocking block depends on the size, shape and slenderness of the block, the stiffness and damping of the foundation and the energy loss during impact. The effect of the stiffness and damping of the foundation system along with the influence of the coefficient of restitution during impact is presented in rocking spectra in which the peak values of the response are compared with those of the rigid block rocking on a monolithic base. Various trends of the response are identified. For instance, less slender and smaller blocks have a tendency to separate easier, whereas the smaller the angle of slenderness, the less sensitive the response to the flexibility, damping and coefficient of restitution of the foundation. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
12.
By now, it is well known that long‐period surface waves can induce resonant response in high‐rise buildings, in particular those located in sedimentary basins. Rayleigh wave passage has been reported to induce rocking motion at the base of the buildings which can increase displacement demands significantly. However, the building behavior to base rocking has not been extensively studied because commercially available instruments do not record rotational components of ground motion, and thus, rocking time histories have not been available to the analysts. In a recent study, we proposed an effective method for estimating the rocking associated with Rayleigh waves, which takes into account their frequency‐dependent phase velocities. In the present work, we select a number of recorded seismic motions which include surface waves on sedimentary basins from recent well‐recorded earthquake events. Then, we proceed to identify and extract the recorded surface waves by using the technique mentioned above. Using realistic soil‐structure analytical models that have been proposed in the published literature for high‐rise buildings, we study their response to Rayleigh waves as they respond to both translational and rocking motions. Of particular interest is to compare the response of such structures with and without the presence of rotational motions due to surface waves. Using the roof displacement and the building interstory drift as response quantities, our results indicate that demands are controlled by rotational (rocking) motions associated with Rayleigh waves. 相似文献
13.
This paper characterizes the ability of natural ground motions to induce rocking demands on rigid structures. In particular, focusing on rocking blocks of different size and slenderness subjected to a large number of historic earthquake records, the study unveils the predominant importance of the strong‐motion duration to rocking amplification (ie, peak rocking response without overturning). It proposes original dimensionless intensity measures (IMs), which capture the total duration (or total impulse accordingly) of the time intervals during which the ground motion is capable of triggering rocking motion. The results show that the proposed duration‐based IMs outperform all other examined (intensity, frequency, duration, and/or energy‐based) scalar IMs in terms of both “efficiency” and “sufficiency.” Further, the pertinent probabilistic seismic demand models offer a prediction of the peak rocking demand, which is adequately “universal” and of satisfactory accuracy. Lastly, the analysis shows that an IM that “efficiently” captures rocking amplification is not necessarily an “efficient” IM for predicting rocking overturning, which is dominated by the velocity characteristics (eg, peak velocity) of the ground motion. 相似文献
14.
The evaluation of the dynamic behaviour of rocking elements is directly correlated to the energy dissipated because of the impacts at the base interface, which can be represented by means of a coefficient of restitution. This schematization is commonly accepted as representative of the out‐of‐plane response of stone masonry walls. An experimental campaign (in a lab environment) aiming at assessing the value of this coefficient for a sacco granite masonry wall is presented in this work. The rocking motion at a predefined bed joint level was induced in the tested specimens in order to validate a novel test setup designed to assess the coefficient of restitution value by means of a realistic reproduction of the rocking behaviour of a single element, under the hypothesis of an infinitely stiff system above the bed joint level. As the main objective of the work was to assess the rocking behaviour of a masonry wall that looses energy at the impacts at a certain joint level, the flexural behaviour was not desirable and had to be avoided. For this purpose, a test setup based on the equivalent block approach was developed. In the final section of this work, comparisons between experimental and numerical results are presented together with some preliminary conclusions on the appropriate modelling strategy and the values of the coefficient of restitution to be used for the seismic assessment of the out‐of‐plane rocking behaviour of this type of sacco stone masonry walls. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
15.
This paper deals with the earthquake response of wine barrel stacks using a physical model of rigid‐body components with discrete flexible and damped contact elements. An analytical 3D formulation of the complex dynamic behavior of different barrel stack configurations is presented. Such behavior includes the real geometry of the bodies, large displacements and rotations, the use of non‐linear contact elements to account for impact and sliding between bodies, and the resulting local energy dissipation at contact. The parameters defining the physical and mathematical model were calibrated experimentally, and the dynamic behavior of a benchmark barrel stack configuration was compared with the experimental results obtained from the literature. It was found that the model is able to predict the exact mode of collapse and the overall behavior of the system. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
16.
Shaking table tests were conducted to investigate the response of rectangular wooden blocks and block assemblies of various sizes and slenderness to harmonic and earthquake base excitation. The shaking tests were followed by an analytical and a numerical study of response of single blocks and block assemblies. The analytical study was aimed at establishing criteria for the initiation of rocking and of overturning in response to harmonic base motion and consisted of solving numerically the differential equations of motion of a rigid block on a rigid foundation. The numerical study, in the course of which the response of both single blocks and block assemblies was examined, was implemented by means of the Distinct Element Method (DEM). Prior to the DE simulation of actual shaking tests, preliminary analyses were conducted to confirm numerical stability and to evaluate material and damping parameters. Comparing the recorded time histories with those given by the analytical study and the DE simulation, good agreement was found. The distinct element model in use appeared to follow the highly non-linear motion of rigid body assemblies faithfully to reality. On the basis of the results, provided that the necessary parameters are carefully estimated, the employed DE model can be regarded as an appropriate tool to simulate response of rigid body assemblies to dynamic base excitation. 相似文献
17.
A rocking podium structure is a class of structures consisting of a superstructure placed on top of a rigid slab supported by free‐standing columns. The free‐standing columns respond to sufficiently strong ground motion excitation by uplifting and rocking. Uplift works as a mechanical fuse that limits the forces transmitted to the superstructure, while rocking enables large lateral displacements. Such ‘soft‐story’ system runs counter to the modern seismic design philosophy but has been used to construct several hundred buildings in countries of the former USSR following Polyakov's rule‐of‐thumb guidelines: (i) that the superstructure behave as a rigid body and (ii) that the maximum lateral displacement of the rocking podium frame be estimated using elastic earthquake displacement response spectra. The objectives of this paper are to present a dynamic model for analysis of the in‐plane seismic response of rocking podium structures and to investigate if Polyakov's rule‐of‐thumb guidelines are adequate for the design of such structures. Examination of the rocking podium structure response to analytical pulse and recorded ground motion excitations shows that the rocking podium structures are stable and that Polyakov's rule‐of‐thumb guidelines produce generally conservative designs. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
18.
This paper investigates the dynamic response of an elastic single‐degree‐of‐freedom oscillator coupled with a rocking wall. Both configurations of a stepping rocking wall and a pinned rocking wall that have been reported in the literature are examined. The full nonlinear equations of motions are derived, and the paper shows through a comprehensive parametric analysis that the coupling with a rocking wall has mixed results on suppressing the dynamic response of the elastic oscillator. The stepping rocking wall is most effective in suppressing displacements of relative flexible structures with a heavier wall being most effective. In contrast, the pinned wall amplifies the displacements along a wide range of the spectrum with a heavier wall being most detrimental. This happens partly because in a pinned wall the moment from its weight works against stability. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
19.
On the seismic performances of rigid block‐like structures coupled with an oscillating mass working as a TMD 下载免费PDF全文
下载免费PDF全文 Giorgia Simoneschi Alessandro Geniola Andrea M. de Leo Angelo Di Egidio 《地震工程与结构动力学》2017,46(9):1453-1469
In this paper, the effects of a mass damper on the rocking motion of a non‐symmetric rigid block‐like structure, subject to different seismic excitation, are investigated. The damper is modelled as a single degree of freedom oscillating mass, running at the top of the block and connected to it by a linear visco‐elastic device. The equations of rocking motion, the uplift and the impact conditions are derived. A nondimensionalisation of the governing equations is performed with the aim to obtain an extensive parametric analysis. The results are achieved by numerical integration of these equations. The slenderness and the base of the rigid block, and the eccentricity of the centre of mass are taken as variable parameters in the analyses. The main objective of the study is to check the performance of the damper versus the spectral characteristics of the seismic input. Three earthquake registrations with different frequency contents are used in the analyses. The results show that the presence of the mass damper leads to different levels of improvement of the response of the system, depending on the spectral characteristics of the seismic input. Curves providing the overturning slenderness of blocks of specific sizes versus the characteristics of the TMD are obtained. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
20.
Lydell Wiebe Constantin Christopoulos Robert Tremblay Martin Leclerc 《地震工程与结构动力学》2013,42(7):1053-1068
Controlled rocking steel frames have been proposed as an efficient way to avoid the structural damage and residual deformations that are expected in conventional seismic force resisting systems. Although the base rocking response is intended to limit the force demands, higher mode effects can amplify member design forces, reducing the viability of the system. This paper suggests that seismic forces may be limited more effectively by providing multiple force‐limiting mechanisms. Two techniques are proposed: detailing one or more rocking joints above the base rocking joint and providing a self‐centring energy dissipative (SCED) brace at one or more levels. These concepts are applied to the design of an eight‐storey prototype structure and a shake table model at 30% scale. A simple numerical model that was used as a design tool is in good agreement with frequency characterization and low‐amplitude seismic tests of the shake table model, particularly when multiple force‐limiting mechanisms are active. These results suggest that the proposed mechanisms can enable better capacity design by reducing the variability of peak seismic force demands without causing excessive displacements. Similar results are expected for other systems that rely on a single location of concentrated nonlinearity to limit peak seismic loads. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献