共查询到20条相似文献，搜索用时 906 毫秒
1.
土-桩-框架结构非线性相互作用的精细数值模型及其验证 总被引：1，自引：0，他引：1
利用有限元软件ABAQUS,建立了土-桩-框架结构非线性相互作用（SSI）的二维精细有限元模型,分别采用记忆型粘塑性嵌套面模型和损伤塑性模型模拟土体和混凝土材料,采用梁单元和rebar单元模拟RC桩基及其内部纵筋,采用接触面对法模拟桩土接触效应,取得了良好的计算效果。将自由场、框架、土-桩-框架结构模型的分析结果和其它成熟的计算软件进行对比,验证了数值模型的有效性。分析发现：桩基外侧靠近承台处的土体的非线性反应很强烈,而桩基内部土体的非线性反应较小,很大程度上只是跟随群桩一起运动。由于桩土动力接触,桩顶的加速度反应可能超出上部结构,并且桩顶的加速度时程曲线上有非常明显的＂针＂状突变。随着地震动强度的增加,上部框架逐渐表现出单自由度体系的动力特征,加速度反应谱有从多个波峰退化为单一波峰的趋势。 相似文献
2.
A three-dimensional hybrid model for the analysis of soil-structure interaction under dynamic conditions is developed which takes advantage of the desirable features of the finite element and substructure methods and which minimizes their undesirable features. The modelling is achieved by partitioning the total soil-structure system into a near-field and a far-field with a hemispherical interface. The near-field, which consists of the structure to be analysed and a finite region of soil around it, is modelled by finite elements. The semi-infinite far-field is modelled by distributed impedance functions at the interface which are determined by system identification methods. Numerical results indicate that the proposed model makes possible realistic and economical assessment of three-dimensional soil-structure interaction for both surface and embedded structures. 相似文献
3.
A two-dimensional (2D) finite element analytical model is developed to analyze the seismic response of rigid highway bridge abutments, retaining and founded on dry sand. A well verified finite element code named FLEX is used for this purpose. The proposed model has the following characteristics: (1) The soil (dry sand in this study) is modeled by a 2D finite element grid; (2) The bridge abutment is molded as a rigid substructure; (3) The strength and deformation of the soil are modeled using the viscous cap constitutive model. This model consists of a failure surface and hardening cap together with an associated flow rule. The cap surface is activated for the soil under the wall to represent compaction during wall rocking. In addition, viscoelastic behavior is provided for representing the hysteretic-like damping of soil during dynamic loading; (4) Interface elements are used between the wall and the soil (at the backface of the wall and under its base) to allow for sliding and for debonding/recontact behavior; (5) The finite element grid is truncated by using an absorbing boundary approximation. Using this boundary at both sides of the grid simulates the horizontal radiation of energy scattered from the wall and the excavation. Shear beams are placed adjacent to the lateral boundaries from each side which give the far-field ground motion, for comparison with those computed adjacent to the boundaries. The analytical model is verified comparing predictions to results from dynamic centrifuge tests, with satisfactory agreement. The proposed model is used to study the dynamic response of an 8.0 m high and 3.0 m wide rigid bridge abutment (proportioned using the traditional approach to design) for different sinusoidal and earthquake acceleration input motions. The results from the analysis show that outward tilting of rigid bridge abutments is the dominant mode of response during dynamic shaking and that these abutments end up with a permanent outward tilt at the end of shaking. The results from all the analyzed cases of the 8.0 m high gravity retaining wall together with those from the analysis of the tilting wall centrifuge tests are discussed and used for proposing a practical method for evaluating the seismic response of rigid abutments during earthquakes. 相似文献
4.
高速铁路中的桥梁常采用灌注桩基础以控制沉降,地震作用是桩基础的设计工况之一。建立桥梁-桥墩-桩基础-地基为一体的耦合系统非线性三维数值分析模型,以典型地震波为输入,考虑上部结构和基础的共同工作、土-结构动力相互作用、材料非线性和土层对桩的侧阻及端阻作用,开展三向地震作用下的动力有限元计算,并对地基主要土层压缩模量、桩体材料弹性模量、桩径和桩长进行参数敏感性分析。计算结果表明:现行的桩基础设计方案能有效控制地震荷载作用下桥梁的变形;地震过程中的不同时刻,桩侧阻发挥程度不同且不可忽略,以单纯的梁单元模拟桩的动力学行为的适用性值得商榷;桩长和地基主要土层压缩模量对桥梁地震反应影响最大,桩体材料弹性模量的影响次之,桩径的影响最小。 相似文献
5.
The influence of inclined piles on the dynamic response of deep foundations and superstructures is still not well understood and needs further research. For this reason, impedance functions of deep foundations with inclined piles, obtained numerically from a boundary element–finite element coupling model, are provided in this paper. More precisely, vertical, horizontal, rocking and horizontal–rocking crossed dynamic stiffness and damping functions of single inclined piles and 2 × 2 and 3 × 3 pile groups with battered elements are presented in a set of plots. The soil is assumed to be a homogeneous viscoelastic isotropic half‐space and the piles are modeled as elastic compressible Euler–Bernoulli beams. The results for different pile group configurations, pile–soil stiffness ratios and rake angles are presented. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
6.
This paper presents the dynamic soil–structure analysis of the main telescope T250 of the Observatorio Astrofísico de Javalambre (OAJ, Javalambre Astrophysical Observatory) on the Pico del Buitre. Vibration control has been of prime concern in the design, since astrophysical observations may be hindered by mechanical vibration of optical equipment due to wind loading. The telescope manufacturer therefore has imposed a minimal natural frequency of 10 Hz for the supporting telescope pier. Dynamic soil–structure interaction may significantly influence the lowest natural frequency of a massive construction as a telescope pier. The structure clamped at its base has a resonance frequency of 14.3 Hz. A coupled finite element–boundary element (FE–BE) model of the telescope pier that accounts for the dynamic interaction of the piled foundation and the soil predicts a resonance frequency of 11.2 Hz, demonstrating the significant effect of dynamic soil–structure interaction. It is further investigated to what extent the coupled FE–BE model can be simplified in order to reduce computation time. The assumption of a rigid pile cap allows us to account for dynamic soil–structure interaction in a simplified way. A coupled FE–BE analysis with a rigid pile cap predicts a resonance frequency of 11.7 Hz, demonstrating a minor effect of the pile cap flexibility on the resonance frequency of the telescope pier. The use of an analytical model for the pile group results in an overestimation of the dynamic soil stiffness. This error is due to the large difference between the actual geometry and the square pile cap model for which the parameters have been tuned. 相似文献
7.
The present study aims at investigating the nonlinear behavior of single hollow pile in layered soil subjected to varying levels of horizontal dynamic load. A finite element model has been developed using commercially available FEM based software. Mohr–Coulomb plasticity model is used to simulate the soil plasticity whereas the pile-material is idealized as elastic. Numerical results are validated comparing with the experimental results. The experimental investigations were carried out in the field located at IIT Kharagpur. Two types of motion: horizontal and rocking are studied. The effects of various influencing parameters, namely, exciting moment, length and diameter of the pile etc. on the nonlinear dynamic response of piles are investigated. It is found that separation of pile from the surrounding soil considerably affects the resonance frequency and amplitude of the pile foundations. 相似文献
8.
三维土-结构动力相互作用的一种时域直接分析方法 总被引：1，自引：0，他引：1
本文提出了一种分析三维土-结构动力相互作用的时域直接方法。该方法采用集中质量显式有限元和透射人工边界模拟无限域地基,通过编制的FORTRAN程序实现;采用ANSYS软件对上部结构进行建模分析,并通过FORTRAN程序对ANSYS软件的调用,实现了土与结构系统在地震作用下的整体分析。该方法为显隐式相结合的方法,地基和上部结构可采用不同的时间步距进行分析,可大大提高效率。通过两算例,验证了该方法的可行性。 相似文献
9.
The paper presents a numerical model for the dynamic analysis of pile groups with inclined piles in horizontally layered soil deposits. Piles are modelled with Euler–Bernoulli beams, while the soil is supposed to be constituted by independent infinite viscoelastic horizontal layers. The pile–soil–pile interaction as well as the hysteretic and geometric damping is taken into account by means of two‐dimensional elastodynamic Green's functions. Piles cap is considered by introducing a rigid constraint; the condensation of the problem permits a consistent derivation of both the dynamic impedance matrix of the soil–foundation system and the foundation input motion. These quantities are those used to perform inertial soil–structure interaction analyses in the framework of the substructure approach. Furthermore, the model allows evaluating the kinematic stress resultants in piles resulting from waves propagating in the soil deposit, taking into account the pile–soil–pile interactions. The model validation is carried out by performing accuracy analyses and comparing results in terms of dynamic impedance functions, kinematic response parameters and pile stress resultants, with those furnished by 3D refined finite element models. To this purpose, classical elastodynamic solutions are adopted to define the soil–pile interaction problem. The model results in low computational demands without significant loss of precision, compared with more rigorous approaches or refined finite element models. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
10.
In this paper, a soil–pile–structure model is tested on a shaking table subject to both a sinusoidal wave and the acceleration time history of the scaled 1940 El Centro earthquake. A medium-size river sand is compacted into a 1.7-m-high laminar rectangular tank to form a loose fill with a relative density of 15%. A single-storey steel structure of 2.54 ton is placed on a concrete pile cap, which is connected to the four end-bearing piles. A very distinct pounding phenomenon between soil and pile is observed; and, the acceleration response of the pile cap can be three times larger than that of the structural response. The pounding is due to the development of a gap separation between soil and pile, and the extraordinary large inertia force suffered at the top of the pile also induces cracking in the pile. To explain this observed phenomenon, nonlinear finite element method (FEM) analyses with a nonlinear gap element have been carried out. The spikes in the acceleration response of the pile cap caused by pounding can be modeled adequately by the FEM analyses. The present results suggest that one of the probable causes of pile damages is due to seismic pounding between the laterally compressed soil and the pile near the pile cap level. 相似文献
11.
Scattering of SH waves by an embedded rigid elliptic cylinder of finite length, which is partially debonded from elastic soil is studied. The debonding regions are modeled as multiple elliptic arc-shaped interface cracks with non-contacting faces. The scattered wave field is expressed as a Mathieu function expansion with unknown coefficients. The mixed boundary conditions of the problem lead to a set of singular integral equations of the first type in terms of the dislocation density functions of the cracks. A quadrature method is used to solve these integral equations numerically. The results for dynamic stress intensity factors, far-field pattern of the displacement and scattering cross sections are presented. We particularly discuss the effects of the ratio of the short radius to long radius of the cylinder. 相似文献
12.
A simple analytical solution is developed for computing the dynamic interaction tensor for floating pile groups with batter piles. For this purpose, the governing differential equations are derived for an unloaded batter floating pile closely spaced to another loaded pile with the same properties. The reaction of soil against pile deformation is modeled by the springs and dashpots along the length of the pile. The soil is assumed linear viscous elastic and the pile behavior is linear elastic. The closed form solutions of governing equations are obtained using appropriate boundary conditions. The results are verified and compared with rigorous and approximate analytical solutions for vertical piles. The proposed method can be readily applied by engineers in the design of pile groups with batter piles. 相似文献
13.
This paper presents a parametric study that looks into the influence of pile rake angle on the kinematic internal forces of deep foundations with inclined piles. Envelopes of maximum kinematic bending moments, shear forces and axial loads are presented along single inclined piles and 2 × 2 symmetrical square pile groups with inclined elements subjected to an earthquake generated by vertically incident shear waves. Inclination angles from 0° to 30° are considered, and three different pile–soil stiffness ratios are studied. These results are obtained through a frequency–domain analysis using a boundary element–finite element code in which the soil is modelled by the boundary element method as a homogeneous, viscoelastic, unbounded region, and the piles are modelled by finite elements as Euler–Bernoulli beams. The rotational kinematic response of the pile foundations is shown to be a key factor on the evolution of the kinematic internal forces along the foundations. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
14.
爆破地震作用下桩-土-结构相互作用的数值模拟 总被引：1，自引：0，他引：1
土-结构动力相互作用是地震工程和结构抗震的重要研究内容,但目前对爆破地震作用下土-结构动力相互作用的研究较少。运用大型有限元软件ANSYS/LS-DYNA,建立了桩-土-结构相互作用体系的三维有限元模型,由桩尖输入实测爆破地震波,取得了良好的计算效果。计算结果表明：考虑桩-土-结构相互作用后,群桩基础中每个桩的位移、加速度和剪应力幅值均呈桩顶大、桩尖小的倒三角分布,桩与承台的接合部比较容易受到损坏;桩-土-结构相互作用体系在爆破地震波冲击后,还会发生几次振动,但是这些振动产生的影响要小于爆破地震产生的影响,这与实测结果相符合;爆破地震波冲击下,群桩基础中,角桩顶部表面的桩土接触压力较大,但在爆破地震波冲击后,中心桩顶部表面的桩土接触压力较大,且具有一定的周期性,直至衰减为零。 相似文献
15.
A boundary element formulation for the dynamic analysis of axially and laterally loaded single piles and pile groups is presented. The piles are represented by compressible beam-column elements and the soil as a hysteretic elastic half-space. The governing equations of motion for the pile domain have been solved exactly for distributed periodic loading intensities. These solutions are then coupled with a numerical solution for the motion of the soil domain by satisfying equilibrium and compatibility at the pile-soil interface. The results obtained from the analysis compare favourably with those from alternative analyses, e.g. finite element, but at greatly reduced computational costs. 相似文献
16.
Some structures may be very massive and may have to be located on relatively soft soil. In such cases, the soil adjacent to the structure behaves in a non-linear fashion and affects the response of the structure to the dynamic loading. An approximate hybrid approach to analyse soil–structure systems accounting for soil non-linearities has been developed in this paper. The approach combines the consistent infinitesimal finite-element cell method (CIFECM) and the finite-element method (FEM). The CIFECM is employed to model the non-linear (near-field) zone of the soil supporting the structure as a series of bounded media. The material properties of the bounded media are selected so that they are compatible with the average effective strains over the whole bounded medium during the excitation. The linear zone of soil away from the foundation, the far-field, is modelled as an unbounded medium using the CIFECM for unbounded media. The structure itself is represented by the FEM. The proposed method is used to model the dynamic response of a one-mass structure and a TV-tower supported on a homogenous stratum and excited by an earthquake. It was found that the secondary soil non-linearity might increase or decrease the base forces of tall slender structures depending on the type of structure, frequency content of the input motion and the dynamic properties of the near-field soil. 相似文献
17.
当前桩基础的抗震设计仅采取构造措施来保证其抗震性能,有可能会过高或过低地估计桩基础的抗震性能。针对某桥梁桩基础的抗震设计,建立全桥的三维有限元模型,计算在桩-土-结构共同工作情况下桩基础的地震响应,通过输入不同地震波来进行对比分析,并对结果进行复核,得出:(1)桩身内力响应与所输入地震动的频谱特性有关,桩身沿横桥方向的内力最大;(2)对于该场地的桥梁桩基础,桩-土-结构共同工作的有限元分析结果与m法结果差别不大;(3)当承台埋深为0时,桩身内力基本都偏大,要对承台侧土体做相应的加固处理。 相似文献
18.
Dynamic effects of moving loads on road pavements: A review 总被引：3，自引：0，他引：3
This review paper deals with the dynamic response of road pavements to moving loads on their surface. The road pavement can be modeled as a beam, a plate, or the top layer of a layered soil medium. The foundation soil can be modeled as a system of elastic springs and dashpots or a homogeneous or layered half-space. The material behavior of the pavement can be elastic or viscoelastic, while that of the foundation layers elastic, viscoelastic, water-saturated poroelastic or even inelastic. The loads are concentrated or distributed of finite extent, may vary with time and move with constant or variable speed. The analysis is done by analytical, analytical/numerical and purely numerical methods, such as finite element and boundary element methods, under conditions of plane strain or full three-dimensionality. A number of representative examples is presented in order to illustrate the problem and the methods of analysis, demonstrate the dynamic effects of moving loads on the layered soil medium and indicate the implications of the results on road and airport pavement design. 相似文献
19.
The influence of nonlinearity on the dynamic response of cast-in-situ reinforced concrete piles subjected to strong vertical excitation was studied. Forced vibration test of single piles (L/d=10, 15, 20) and 2×2 pile groups (s/d=2, 3, 4 for each L/d) were conducted in the field for two different embedded conditions of pile cap. From the measured nonlinear response curves, the effective pile–soil system mass, stiffness and damping were determined and the nonlinear response curves were back-calculated using the theory of nonlinear vibration. The test results were compared with the continuum approach of Novak with dynamic interaction factor approach using both linear and linear-equivalent numerical methods. Reasonable match between the measured and predicted response was found for linear-equivalent methods by introducing a weak boundary-zone around the pile to approximately account for the nonlinear behaviour of pile–soil system. The test data were used to establish the empirical relationship in order to estimate the extent of soil separation around the pile with soil under vertical vibration. 相似文献