共查询到20条相似文献，搜索用时 15 毫秒
1.
城市桥梁粘滞阻尼器防地震碰撞分析与参数设计 总被引：2，自引：0，他引：2
研究了粘滞阻尼器防止城市梁桥地震碰撞反应的效果并提出了其参数设计方法。分析了线性粘滞阻尼器与非线性粘滞阻尼器阻尼系数的等效关系。运用随机振动理论与随机等效线性化理论建立了邻联间安装粘滞阻尼器后最大相对位移及墩顶最大位移的计算方法。以控制邻联最大相对位移小于实际间隙为目标,提出了防碰撞粘滞阻尼器参数设计方法。对1座4跨隔震连续梁桥进行了仿真分析,结果表明:粘滞阻尼器能有效抑制邻联的碰撞反应且不会显著增大桥墩的延性需求。在相同阻尼系数的情况下,粘滞阻尼器的速度指数越小,其防碰撞效果越好。利用人工波进行的时程分析结果验证了参数设计方法的可行性。 相似文献
2.
Pounding between adjacent bridge structures with insufficient separation distance has been identified as one of the primary causes of damage in many major earthquakes. It takes place because the closing relative movement is larger than the structural gap provided between the structures. This relative structural response is controlled not only by the dynamic properties of the participating structures but also by the characteristics of the ground excitations. The consequence of the spatial variation of ground motions has been studied by researchers; however, most of these studies were performed numerically. The objective of the present research is to experimentally evaluate the influence of spatial variation of ground motions on the pounding behaviour of three adjacent bridge segments. The investigation is performed using three shake tables. The input spatially varying ground excitations are simulated based on the New Zealand design spectra for soft soil, shallow soil and strong rock using an empirical coherency loss function. Results confirm that the spatially nonniform ground motions increase the relative displacement of adjacent bridge girders and pounding forces. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
3.
Seismic pounding between adjacent frames in multiple-frame bridges and girder ends in multi-span simply supported bridges has been commonly observed in several recent earthquakes. The consequences of pounding include damage to piers, abutments, shear keys, bearings and restrainers, and possible collapse of deck spans. This paper investigates pounding in bridges from an analytical perspective. A simplified nonlinear model of a multiple-frame bridge is developed including the effects of inelastic frame action and nonlinear hinge behavior, to study the seismic response to longitudinal ground motion. Pounding is implemented using the contact force-based Kelvin model, as well as the momentum-based stereomechanical approach, Parameter studies are conducted to determine the effects of frame period ratio, column hysteretic behavior, energy dissipation during impact and near source ground motions on the pounding response of the bridge. The results indicate that pounding is most critical for highly out-of-phase frames and is not significant for frame period ratios greater than 0.7. Impact models without energy dissipation overestimate the displacement and acceleration amplifications due to impact, especially for elastic behavior of the frames. Representation of stiffness degradation in bridge columns is essential in capturing the accurate response of pounding frames subjected to far field ground motion. Finally, it is shown that strength degradation and pounding can result in significant damage to the stiffer frames of the bridge when subjected to large acceleration pulses from near field ground motion records. 相似文献
4.
Seismic analysis of a curved bridge considering deck‐abutment pounding interaction: an analytical investigation on the post‐impact response 
下载免费PDF全文
下载免费PDF全文 Horizontal curved bridges are very common at intersections and at the changing angle of bridge alignment. Almost in every previous earthquake report, it can be seen that the columns of a curved segment experience torsional damage, and the curved decks are unseated from the abutment support. The main reason behind that phenomenon is the in‐plane deck rotation which results because of the complex dynamic coupling between two longitudinal directional vibrations. The curved decks are susceptible to deck rotation because in a curved segment, the centre of mass and the centre of stiffness generally lie outside the bridge deck and are not located at the same point. The pounding with the abutment often increases the rotational tendency of the deck. In this paper, a classical mechanics‐based approach is adopted to analytically estimate the deck rotation potential of curved bridge considering the deck‐abutment pounding interaction. The deck‐abutment pounding is modelled using non‐smooth techniques considering the Newton's impact law in the normal and Coulomb's friction in the tangential direction. Within the scope of this paper, a parametric study is performed to get the ideal combination of the column and bent arrangement and the gap distance. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
5.
Implications of seismic pounding on the longitudinal response of multi-span bridges - an analytical perspective 总被引：2，自引：0，他引：2
ReginaldDesRoches SusendarMuthukumar 《地震工程与工程振动(英文版)》2004,3(1):57-65
Seismic pounding between adjacent frames in multiple-frame bridges and girder ends in multi-span simply supported bridges has been commonly observed in several recent earthquakes. The consequences of pounding include damage to piers, abutments, shear keys, bearings and restrainers, and possible collapse of deck spans. This paper investigates pounding in bridges from an analytical perspective. A simplified nonlinear model of a multiple-frame bridge is developed including the effects of inelastic frame action and nonlinear hinge behavior, to study the seismic response to longitudinal ground motion. Pounding is implemented using the contact force-based Kelvin model, as well as the momentum-based stereomechanical approach. Parameter studies are conducted to determine the effects of frame period ratio, column hysteretic behavior, energy dissipation during impact and near source ground motions on the pounding response of the bridge. The results indicate that pounding is most critical for highly out-of-phase frames and is not significant for frame period ratios greater than 0.7. Impact models without energy dissipation overestimate the displacement and acceleration amplifications due to impact, especially for elastic behavior of the frames. Representation of stiffness degradation in bridge columns is cssential in capturing the accurate response of pounding frames subjected to far field ground motion. Finally, it is shown that strength degradation and pounding can result in significant damage to the stiffer frames of the bridge when subjected to large acceleration pulses from near field ground motion records. 相似文献
6.
Bridges with deck supported on either sliding or elastomeric bearings are very common in mid‐seismicity regions. Their main seismic vulnerabilities are related to the pounding of the deck against abutments or between the different deck elements. A simplified model of the longitudinal behavior of those bridges will allow to characterize the reaction forces developed during pounding using the Pacific Earthquake Engineering Research Center framework formula. In order to ensure the general applicability of the results obtained, a large number of system parameter combinations will be considered. The heart of the formula is the identification of suitable intermediate variables. First, the pseudo acceleration spectral value for the fundamental period of the system (Sa(Ts)) will be used as an intensity measure (IM). This IM will result in a very large non‐explained variability of the engineering demand parameter. A portion of this variability will be proved to be related to the relative content of high‐frequency energy in the input motion. Two vector‐valued IMs including a second parameter taking this energy content into account will then be considered. For both of them, a suitable form for the conditional intensity dependence of the response will be obtained. The question of which one to choose will also be analyzed. Finally, additional issues related to the IM will be studied: its applicability to pulse‐type records, the validity of scaling records and the sufficiency of the IM. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
7.
Pounding of adjacent superstructure segments in elevated bridges during severe earthquakes can result in significant structural damage. The aim of this paper is to analyse several methods of reduction of the negative effects of collisions induced by the seismic wave propagation effect. The analysis is conducted on a detailed three‐dimensional structural component model of an isolated highway bridge. The results show that the influence of pounding on the structural response is significant in the longitudinal direction of the bridge and significantly depends on the gap size between superstructure segments. The smallest response can be obtained for very small gap sizes and for gap sizes large enough to prevent pounding. Further analysis indicates that the bridge behaviour can be effectively improved by placing hard rubber bumpers between segments and by stiff linking the segments one with another. The experimental results show that, for the practical application of such connectors, shock transmission units can be used. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
8.
Unseating of bridge girders/decks during earthquakes is very harmful to the safety and serviceability of bridges. Evidence from recent severe earthquakes indicates that in addition to damage along longitudinal direction, lateral displacement and rotation of bridge girders caused by pounding to adjacent girders can also lead to unseating. To simulate this effect, 3D modelling of the dynamic performance of whole bridge structures, including pounding, is needed strongly. This paper presents a 3D model that is practically suitable to precisely analyse pounding between bridge girders. Experiments have been conducted to verify the proposed pounding model. The 3D non‐linear modelling of steel elevated bridges is also discussed. A general‐purpose dynamic analysis program for bridges, namely dynamic analysis of bridge systems (DABS) has been developed. Seismic analyses on a chosen three‐span steel bridge are conducted for several cases including pounding as a case study. The applicability of the proposed pounding model is illustrated by the computations. The effects of poundings on the response of bridge girders are discussed and the computation results are given. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
9.
针对曲线匝道桥梁伸缩缝地震碰撞破坏现象,依托某市多层互通式立交体系中一座独立、单支、多联、曲线、箱梁匝道桥,用Kelvin接触单元模拟了伸缩缝处地震和碰撞效应,建立了全桥空间动力分析模型。利用非线性时程分析法,分别输入单维(X方向、Y方向)和多维共8种地震动工况,分析了曲线匝道桥梁伸缩缝的地震碰撞响应差异。结果表明:曲线匝道桥梁由于曲率的影响,不同方向地震动响应存在耦合效应,其伸缩缝碰撞响应的最不利值应考虑多维地震输入工况,并用碰撞力和碰撞位移双指标控制伸缩缝的地震碰撞响应。 相似文献
10.
Pounding between adjacent superstructures has been a major cause of highway bridge damage in the past several earthquakes. This paper presents an experimental and analytical study on pounding reduction of highway bridges subjected to earthquake ground motions by using magnetorheological (MR) dampers. An analytical model, which incorporates structural pounding and MR dampers, is developed. A series of shaking table tests on a 1:20 scaled base‐isolated bridge model are performed to investigate the effects of pounding between adjacent superstructures on the dynamics of the structures. Based on the test results, the parameters of the linear and the nonlinear viscoelastic impact models are identified. Performance of the semiactive system for reducing structural pounding is also investigated experimentally, in which the MR dampers are used in conjunction with the proposed control strategy, to verify the effectiveness of the MR dampers. Structural responses are also simulated by using the established analytical model and compared with the shaking table test results. The results show that pounding between adjacent superstructures of the highway bridge significantly increases the structural acceleration responses. For the base‐isolated bridge model considered here, the semiactive control system with MR dampers effectively precludes pounding. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
11.
12.
Effects of seismic isolation on the seismic response of a California high‐speed rail prototype bridge with soil‐structure and track‐structure interactions 下载免费PDF全文
下载免费PDF全文 With the launch of the high‐speed train project in California, the seismic risk is a crucial concern to the stakeholders. To investigate the seismic behavior of future California High‐Speed Rail (CHSR) bridge structures, a 3D nonlinear finite‐element model of a CHSR prototype bridge is developed. Soil‐structure and track‐structure interactions are accounted for in this comprehensive numerical model used to simulate the seismic response of the bridge and track system. This paper focuses on examining potential benefits and possible drawbacks of the a priori promising application of seismic isolation in CHSR bridges. Nonlinear time history analyses are performed for this prototype bridge subjected to two bidirectional horizontal historical earthquake ground motions each scaled to two different seismic hazard levels. The effect of seismic isolation on the seismic performance of the bridge is investigated through a detailed comparison of the seismic response of the bridge with and without seismic isolation. It is found that seismic isolation significantly reduces the deck acceleration and the force demand in the bridge substructure (i.e., piers and foundations), especially for high‐intensity earthquakes. However, seismic isolation increases the deck displacement (relative to the pile cap) and the stresses in the rails. These findings imply that seismic isolation can be promisingly applied to CHSR bridges with due consideration of balancing its beneficial and detrimental effects through using appropriate isolators design. The optimum seismic isolator properties can be sought by solving a performance‐based optimum seismic design problem using the nonlinear finite‐element model presented herein. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
13.
An improvement is first suggested to the modal pushover analysis (MPA) procedure for bridges initially proposed by the writers (Earthquake Engng Struct. Dyn. 2006; 35 (11):1269–1293), the key idea being that the deformed shape of the structure responding inelastically to the considered earthquake level is used in lieu of the elastic mode shape. The proposed MPA procedure is then verified by applying it to two actual bridges. The first structure is the Krystallopigi bridge, a 638 m‐long multi‐span bridge, with significant curvature in plan, unequal pier heights, and different types of pier‐to‐deck connections. The second structure is a 100 m‐long three‐span overpass bridge, typical in modern motorway construction in Europe, which, although ostensibly a regular structure, is found to exhibit a rather unsymmetric response in the transverse direction, mainly due to torsional irregularity. The bridges are assessed using response spectrum, ‘standard’ pushover (SPA), and MPA, and finally using non‐linear response history analysis (NL‐RHA) for a number of spectrum‐compatible motions. The MPA provided a good estimate of the maximum inelastic deck displacement for several earthquake intensities. The SPA on the other hand could not predict well the inelastic deck displacements of bridges wherever the contribution of the first mode to the response of the bridge was relatively low. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
14.
Transient responses of girder bridges with vertical poundings under near‐fault vertical earthquake 下载免费PDF全文
下载免费PDF全文 Previous studies on pounding responses of bridge structures mainly focus on the horizontal pounding between adjacent structures. However, the vertical pounding responses of bridge are rarely studied. The aim of this paper is develop a theoretical approach to investigate the transient behavior of continuous bridge under near‐fault vertical ground motions. The transient behavior of bridge manifests as the earthquake‐induced response wave and pounding‐induced response wave travel throughout bridge. Based on a new continuous model of beam–spring–rod, the theoretical solution of bridge responses involving multiple vertical poundings is derived by the expansion of transient wave functions in a series of eigenfunctions. A new theoretical solving approach of the multiple vertical pounding forces is presented based on the transient internal force on the contact surface of the girder and bearing. The numerical results show that the present method can reasonably capture the propagations of the earthquake‐induced response wave and pounding‐induced response wave. The calculations of pounding force by the present method are convergence of the time‐step size and truncation number of wave modes. As the effect of transient wave is taken into account, the numerical results show several transient phenomena involving the vertical pounding, the high pounding force, the multiple‐pounding phenomenon, the vertical separation of girder from the bearing, the dependence of poundings on earthquake period and the narrow period window of poundings. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
15.
In this paper the dynamic response of two and three pounding oscillators subjected to pulse‐type excitations is revisited with dimensional analysis. Using Buckingham's Π‐theorem the number of variables that govern the response of the system is reduced by three. When the response is presented in the dimensionless Π‐terms remarkable order emerges. It is shown that regardless of the acceleration level and duration of the pulse all response spectra become self‐similar and follow a single master curve. This is true despite the realization of finite duration contacts with increasing durations as the excitation level increases. All physically realizable contacts (impacts, continuous contacts, and detachments) are captured via a linear complementarity approach. The study confirms the existence of three spectral regions. The response of the most flexible among the two oscillators amplifies in the low range of the frequency spectrum (flexible structures); whereas, the response of the most stiff among the two oscillators amplifies at the upper range of the frequency spectrum (stiff structures). Most importantly, the study shows that pounding structures such as colliding buildings or interacting bridge segments may be most vulnerable for excitations with frequencies very different from their natural eigenfrequencies. Finally, by applying the concept of intermediate asymptotics, the study unveils that the dimensionless response of two pounding oscillators follows a scaling law with respect to the mass ratio, or in mathematical terms, that the response exhibits an incomplete self‐similarity or self‐similarity of the second kind with respect to the mass ratio. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
16.
In this study the inelastic behavior of steel arch bridges subjected to strong ground motions from major earthquakes is investigated by dynamic analyses of a typical steel arch bridge using a three‐dimensional (3D) analytical model, since checking seismic performance against severe earthquakes is not usually performed when designing such kinds of bridge. The bridge considered is an upper‐deck steel arch bridge having a reinforced concrete (RC) deck, steel I‐section girders and steel arch ribs. The input ground motions are accelerograms which are modified ground motions based on the records from the 1995 Hyogoken‐Nanbu earthquake. Both the longitudinal and transverse dynamic characteristics of the bridge are studied by investigation of time‐history responses of the main parameters. It is found that seismic responses are small when subjected to the longitudinal excitation, but significantly large under the transverse ground motion due to plasticization formed in some segments such as arch rib ends and side pier bases where axial force levels are very high. Finally, a seismic performance evaluation method based on the response strain index is proposed for such steel bridge structures. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
17.
针对非规则人字形桥梁在地震作用下灾变严重的问题,以一座非规则人字形桥梁为研究对象,建立其空间分析模型,研究综合考虑支座摩擦滑移、结构碰撞对非规则人字形桥梁地震响应的影响。结果表明:邻梁间的碰撞作用可使得桥梁墩顶位移及内力相比不考虑时有所减小,但同时也使梁体产生了较大的加速度脉冲效应;当考虑支座摩擦滑移和结构碰撞时,固定墩墩顶位移和邻梁相对位移峰值有一定程度增大,然而对梁体加速度脉冲效应结果影响并无统一规律;纵向地震波作用下,非规则人字形桥梁不仅存在顺桥向的碰撞,横桥向的碰撞响应也不容忽视。非规则人字形桥梁进行抗震设计计算时应选取符合实际情况的计算模型,考虑支座摩擦滑移及结构间的碰撞。 相似文献
18.
为研究近断层地震动对曲线连续梁桥地震响应及碰撞效应的影响,采用非线性时程分析法,分别研究脉冲效应、上盘效应及方向性效应对某三跨曲线连续梁桥支座位移、桥墩内力及邻梁间碰撞力的影响;通过支座隔震率的对比分析,探究不同类型近断层地震动下地震响应产生差异的原因。研究结果表明:脉冲效应、上盘效应和方向性效应均会增大曲线连续梁桥地震响应,脉冲效应的影响尤为显著;脉冲效应和方向性效应削弱了高阻尼橡胶支座的隔震特性,而上盘效应对桥梁响应的影响仅与上盘地震动自身特性有关;综合来看,脉冲效应对曲线梁碰撞响应影响最明显,上盘效应影响不大。 相似文献
19.
针对地震作用下公路桥梁的碰撞问题,采用接触单元法模拟桥梁之间的碰撞作用,并在此基础上研究了采用磁流变阻尼器的公路桥梁碰撞的半主动控制方法。通过对某公路桥梁的数值模拟发现,地震作用下桥梁之间的相互碰撞,将大幅增加桥梁的绝对加速度响应。采用磁流变阻尼器的半主动控制系统能够较好地降低结构的地震响应和消除地震作用下的碰撞。 相似文献
20.
It is commonly understood that earthquake ground excitations at multiple supports of large dimensional structures are not the same. These ground motion spatial variations may significantly influence the structural responses. Similarly, the interaction between the foundation and the surrounding soil during earthquake shaking also affects the dynamic response of the structure. Most previous studies on ground motion spatial variation effects on structural responses neglected soil–structure interaction (SSI) effect. This paper studies the combined effects of ground motion spatial variation, local site amplification and SSI on bridge responses, and estimates the required separation distances that modular expansion joints must provide to avoid seismic pounding. It is an extension of a previous study (Earthquake Engng Struct. Dyn. 2010; 39 (3):303–323), in which combined ground motion spatial variation and local site amplification effects on bridge responses were investigated. The present paper focuses on the simultaneous effect of SSI and ground motion spatial variation on structural responses. The soil surrounding the pile foundation is modelled by frequency‐dependent springs and dashpots in the horizontal and rotational directions. The peak structural responses are estimated by using the standard random vibration method. The minimum total gap between two adjacent bridge decks or between bridge deck and adjacent abutment to prevent seismic pounding is estimated. Numerical results show that SSI significantly affects the structural responses, and cannot be neglected. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献