首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
The Rhine Rift System (RRS) forms part of the European Cenozoic Rift System (ECRIS) and transects the Variscan Orogen, Permo-Carboniferous troughs and Late Permian to Mesozoic thermal sag basins. Crustal and lithospheric thicknesses range in the RRS area between 24–36 km and 50–120 km, respectively. We discuss processes controlling the transformation of the orogenically destabilised Variscan lithosphere into an end-Mesozoic stabilised cratonic lithosphere, as well as its renewed destabilisation during the Cenozoic development of ECRIS. By end-Westphalian times, the major sutures of the Variscan Orogen were associated with 45–60 km deep crustal roots. During the Stephanian-Early Permian, regional exhumation of the Variscides was controlled by their wrench deformation, detachment of subducted lithospheric slabs, asthenospheric upwelling and thermal thinning of the mantle-lithosphere. By late Early Permian times, when asthenospheric temperatures returned to ambient levels, lithospheric thicknesses ranged between 40 km and 80 km, whilst the thickness of the crust was reduced to 28–35 km in response to its regional erosional and local tectonic unroofing and the interaction of mantle-derived melts with its basal parts. Re-equilibration of the lithosphere-asthenosphere system governed the subsidence of Late Permian-Mesozoic thermal sag basins that covered much of the RRS area. By end-Cretaceous times, lithospheric thicknesses had increased to 100–120 km. Paleocene mantle plumes caused renewed thermal weakening of the lithosphere. Starting in the late Eocene, ECRIS evolved in the Pyrenean and Alpine foreland by passive rifting under a collision-related north-directed compressional stress field. Following end-Oligocene consolidation of the Pyrenees, west- and northwest-directed stresses originating in the Alps controlled further development of ECRIS. The RRS remained active until the Present, whilst the southern branch of ECRIS aborted in the early Miocene. Extensional strain across ECRIS amounts to some 7 km. Plume-related thermal thinning of the lithosphere underlies uplift of the Rhenish Massif and Massif Central. Lithospheric folding controlled uplift of the Vosges-Black Forest Arch.  相似文献   

2.
The development of the Alpine mountain belt has been governed by the convergence of the African and European plates since the Late Cretaceous. During the Cenozoic, this orogeny was accompanied with two major kinds of intraplate deformation in the NW-European foreland: (1) the European Cenozoic Rift System (ECRIS), a left-lateral transtensional wrench zone striking NNE-SSW between the western Mediterranean Sea and the Bohemian Massif; (2) long-wavelength lithospheric folds striking NE and located between the Alpine front and the North Sea. The present-day geometry of the European crust comprises the signatures of these two events superimposed on all preceding ones. In order to better define the processes and causes of each event, we identify and separate their respective geometrical signatures on depth maps of the pre-Mesozoic basement and of the Moho. We derive the respective timing of rifting and folding from sedimentary accumulation curves computed for selected locations of the Upper Rhine Graben. From this geometrical and chronological separation, we infer that the ECRIS developed mostly from 37 to 17 Ma, in response to north-directed impingement of Adria into the European plate. Lithospheric folds developed between 17 and 0 Ma, after the azimuth of relative displacement between Adria and Europe turned counter-clockwise to NW–SE. The geometry of these folds (wavelength = 270 km; amplitude = 1,500 m) is consistent with the geometry, as predicted by analogue and numerical models, of buckle folds produced by horizontal shortening of the whole lithosphere. The development of the folds resulted in ca. 1,000 m of rock uplift along the hinge lines of the anticlines (Burgundy–Swabian Jura and Normandy–Vogelsberg) and ca. 500 m of rock subsidence along the hinge line of the intervening syncline (Sologne–Franconian Basin). The grabens of the ECRIS were tilted by the development of the folds, and their rift-related sedimentary infill was reduced on anticlines, while sedimentary accumulation was enhanced in synclines. We interpret the occurrence of Miocene volcanic activity and of topographic highs, and the basement and Moho configurations in the Vosges–Black Forest area and in the Rhenish Massif as interference patterns between linear lithospheric anticlines and linear grabens, rather than as signatures of asthenospheric plumes.
O. BourgeoisEmail:
  相似文献   

3.
《Earth》2006,74(3-4):127-196
Research on neotectonics and related seismicity has hitherto been mostly focused on active plate boundaries that are characterized by generally high levels of earthquake activity. Current seismic hazard estimates for intraplate domains are mainly based on probabilistic analyses of historical and instrumental earthquake catalogues. The accuracy of such hazard estimates is limited by the fact that available catalogues are restricted to a few hundred years, which, on geological time scales, is insignificant and not suitable for the assessment of tectonic processes controlling the observed earthquake activity. More reliable hazard prediction requires access to high quality data sets covering a geologically significant time span in order to obtain a better understanding of processes controlling on-going intraplate deformation.The Alpine Orogen and the intraplate sedimentary basins and rifts in its northern foreland are associated with a much higher level of neotectonic activity than hitherto assumed. Seismicity and stress indicator data, combined with geodetic and geomorphologic observations, demonstrate that deformation of the Northern Alpine foreland is still on-going and will continue in the future. This has major implications for the assessment of natural hazards and the environmental degradation potential of this densely populated area. We examine relationships between deeper lithospheric processes, neotectonics and surface processes in the northern Alpine Foreland, and their implications for tectonically induced topography.For the Environmental Tectonics Project (ENTEC), the Upper and Lower Rhine Graben (URG and LRG) and the Vienna Basin (VB) were selected as natural laboratories. The Vienna Basin developed during the middle Miocene as a sinistral pull-apart structure on top of the East Alpine nappe stack, whereas the Upper and Lower Rhine grabens are typical intracontinental rifts. The Upper Rhine Graben opened during its Late Eocene and Oligocene initial rifting phase by nearly orthogonal crustal extension, whereas its Neogene evolution was controlled by oblique extension. Seismic tomography suggests that during extension the mantle-lithosphere was partially decoupled from the upper crust at the level of the lower crust. However, whole lithospheric folding controlled the mid-Miocene to Pliocene uplift of the Vosges–Black Forest Arch, whereas thermal thinning of the mantle–lithosphere above a mantle plume contributed substantially to the past and present uplift of the Rhenish Massif. By contrast, oblique crustal extension, controlling the late Oligocene initial subsidence stage of the Lower Rhine Graben, gave way to orthogonal extension at the transition to the Neogene.The ENTEC Project integrated geological, geophysical, geomorphologic, geodetic and seismological data and developed dynamic models to quantify the societal impact of neotectonics in areas hosting major urban and industrial activity concentrations. The response of Europe's intraplate lithosphere to Late Neogene compressional stresses depends largely on its thermo-mechanical structure, which, in turn, controls vertical motions, topography evolution and related surface processes.  相似文献   

4.
《地学前缘(英文版)》2020,11(3):925-942
The Pb isotope composition of the upper mantle beneath Central Europe is heterogeneous due to the subduction of regionally contrasting material during the Variscan and Alpine orogenies.Late Variscan to Cenozoic mantlederived melts allow mapping this heterogeneity on a regional scale for the last ca.340 Myr.Late Cretaceous and Cenozoic anorogenic magmatic rocks of the Bohemian Massif(lamprophyres,volcanic rocks of basanite/tephrite and trachyte/phonolite series) concentrate mostly in the Eger Rift.Cretaceous ultramafic lamprophyres yielded the most radiogenic Pb isotope signatures reflecting a maximum contribution from metasomatised lithospheric mantle,whereas Tertiary alkaline lamprophyres originated from mantle with less radiogenic ~(206)Pb/~(204)b ratios suggesting a more substantial modification of lithospheric source by interaction with asthenosphericderived melts.Cenozoic volcanic rocks of the basanite/tephrite and trachyte/phonolite series define a linear mixing trend between these components,indicating dilution of the initial lithospheric mantle signature by upwelling asthenosphere during rifting.The Pb isotope composition of Late Cretaceous and Cenozoic magmatic rocks of the Bohemian Massif follows the same Pb growth curve as Variscan orogenic lamprophyres and lamproites that formed during the collision between Laurussia,Gondwana,and associated terranes.This implies that the crustal Pb signature in the post-Variscan mantle is repeatedly sampled by younger anorogenic melts.Most Cenozoic mantle-derived rocks of Central Europe show similar Pb isotope ranges as the Bohemian Massif.  相似文献   

5.
Western Europe is traversed by the Rhinegraben rift system. The stages of graben formation evolved coincidentally with the culminations of compressional folding in the Alps. Rhinegraben rifting has been controlled by mantle diapirism, but the Alpine orogeny by subduction of lithosphere. Presumably, Alpine subduction forced compensating mantle uplift in the foreland. The Middle Eocene to Oligocene crustal spreading of the Rhinegraben implies a state of stress with a maximum horizontal component parallel to the graben axis (about 20?). In the same area, the Recent average direction of maximum compressive stress is of about 320? (NW), as calculated by in-situ stress measurements, fault-plane solutions of earthquakes and Recent crustal movements. The rotation of the stress components relative to the crust of stable Europe evolved subsequent to counterclockwise rotations of microplates in the Mediterranean. A model is proposed which ascribes these rotations to alterating shear motions of the Afro-Arabian macroplates relative to stable Europe exerting a ball-bearing effect to the intervenient microplates. The postulated motions are in accord with the patterns of inhomogeneous ocean floor spreading east and west of the African plate. The stages of Alpine plate collision had induced a significant readjustment of intraplate stress conditions, and deformation in the cratonic foreland of stable Europe.  相似文献   

6.
The presence of two regional seismic networks in southeastern France provides us high-quality data to investigate upper mantle flow by measuring the splitting of teleseismic shear waves induced by seismic anisotropy. The 10 three-component and broadband stations installed in Corsica, Provence, and western Alps efficiently complete the geographic coverage of anisotropy measurements performed in southern France using temporary experiments deployed on geodynamic targets such as the Pyrenees and the Massif Central. Teleseismic shear waves (mainly SKS and SKKS) are used to determine the splitting parameters: the fast polarization direction and the delay time. Delay times ranging between 1.0 and 1.5 s have been observed at most sites, but some larger delay times, above 2.0 s, have been observed at some stations, such as in northern Alps or Corsica, suggesting the presence of high strain zones in the upper mantle. The azimuths of the fast split shear waves define a simple and smooth pattern, trending homogeneously WNW–ESE in the Nice area and progressively rotating to NW–SE and to NS for stations located further North in the Alps. This pattern is in continuity with the measurements performed in the southern Massif Central and could be related to a large asthenospheric flow induced by the rotation of the Corsica–Sardinia lithospheric block and the retreat of the Apenninic slab. We show that seismic anisotropy nicely maps the route of the slab from the initial rifting phase along the Gulf of Lion (30–22 Ma) to the drifting of the Corsica–Sardinia lithospheric block accompanied by the creation of new oceanic lithosphere in the Liguro–Provençal basin (22–17 Ma). In the external and internal Alps, the pattern of the azimuth of the fast split waves follows the bend of the alpine arc. We propose that the mantle flow beneath this area could be influenced or perhaps controlled by the Alpine deep penetrative structures and that the Alpine lithospheric roots may have deflected part of the horizontal asthenospheric flow around its southernmost tip.  相似文献   

7.
The lithosphere of the Northern Alpine foreland has undergone a polyphase evolution during which interacting stress-induced intraplate deformation and upper mantle thermal perturbations controlled folding of the thermally weakened lithosphere. In this paper we address relationships among deeper lithospheric processes, neotectonics and surface processes in the Northern Alpine foreland with special emphasis on tectonically induced topography. We focus on lithosphere memory and neotectonics, paying special attention to the thermo-mechanical structure of the Rhine Graben System and adjacent areas of the northern Alpine foreland lithosphere. We discuss implications for mechanisms of large-scale intraplate deformation and links with surface processes and topography evolution.  相似文献   

8.
Intraplate compressional features, such as inverted extensional basins, upthrust basement blocks and whole lithospheric folds, play an important role in the structural framework of many cratons. Although compressional intraplate deformation can occur in a number of dynamic settings, stresses related to collisional plate coupling appear to be responsible for the development of the most important compressional intraplate structures. These can occur at distances of up to ±1600 km from a collision front, both in the fore-arc (foreland) and back-arc (hinterland) positions with respect to the subduction system controlling the evolution of the corresponding orogen. Back-arc compression associated with island arcs and Andean-type orogens occurs during periods of increased convergence rates between the subducting and overriding plates. For the build-up of intraplate compressional stresses in fore-arc and foreland domains, four collision-related scenarios are envisaged: (1) during the initiation of a subduction zone along a passive margin or within an oceanic basin; (2) during subduction impediment caused by the arrival of more buoyant crust, such as an oceanic plateau or a microcontinent at a subduction zone; (3) during the initial collision of an orogenic wedge with a passive margin, depending on the lithospheric and crustal configuration of the latter, the presence or absence of a thick passive margin sedimentary prism, and convergence rates and directions; (4) during post-collisional over-thickening and uplift of an orogenic wedge. The build-up of collision-related compressional intraplate stresses is indicative for mechanical coupling between an orogenic wedge and its fore- and/or hinterland. Crustal-scale intraplate deformation reflects mechanical coupling at crustal levels whereas lithosphere-scale deformation indicates mechanical coupling at the level of the mantle-lithosphere, probably in response to collisional lithospheric over-thickening of the orogen, slab detachment and the development of a mantle back-stop. The intensity of collisional coupling between an orogen and its fore- and hinterland is temporally and spatially variable. This can be a function of oblique collision. However, the build-up of high pore fluid pressures in subducted sediments may also account for mechanical decoupling of an orogen and its fore- and/or hinterland. Processes governing mechanical coupling/decoupling of orogens and fore- and hinterlands are still poorly understood and require further research. Localization of collision-related compressional intraplate deformations is controlled by spatial and temporal strength variations of the lithosphere in which the thermal regime, the crustal thickness, the pattern of pre-existing crustal and mantle discontinuities, as well as sedimentary loads and their thermal blanketing effect play an important role. The stratigraphic record of collision-related intraplate compressional deformation can contribute to dating of orogenic activity affecting the respective plate margin.  相似文献   

9.
The Pyrenees is a young mountain belt formed as part of the larger Alpine collision zone. This excursion explores the development of the Pyrenean Mountain Belt in southern France, from its early extensional phase in the mid‐Cretaceous and subsequent collisional phase, through its uplift and erosion in the Late Cretaceous and again in the Eocene, which led to the development of the Aquitaine‐Languedoc foreland basin. One of the complexities of the Pyrenean Belt is that thrusting, uplift and erosion during the Pyrenean orogeny exposed older Variscan basement rocks in the central core of the mountains, rocks which were metamorphosed during an earlier event in the late Carboniferous. Thus, this orogenic belt also tells the story of an earlier collision between Laurussia in the north and Gondwana in the south at c. 300 Ma, prior to the onset of the Pyrenean events at c. 100 Ma. Here we seek to unravel these two separate orogenic stories.  相似文献   

10.
The complete gravity data set from France and part of the neighboring countries has been analyzed to compute the topography of the Moho undulations. This work is based on an improved filtering technique and an appropriate assumed density contrast between the crust and the upper mantle. Comparison with deep seismic refraction data reveals that this relief map expresses the continuity and geometry of the Moho undulations better than the sparsely distributed seismic refraction data in France. This gravity Moho map, though may not give absolute depths at places, provides a far better correlation with surface geology than the result from other geophysical techniques. Four domains have been recognized: (a) the Alpine domain where all the Moho undulations are concentric with the Alps; (b) the Armorican domain in which all the undulations are north-west/south-east oriented; (c) the Pyrenean domain, in which the undulations are parallel with the Mountain chain; and (d) the Massif Central Domain which does not show clear structural orientation because of the influence of the strong heat flow located at the lower crust/upper mantle interface. Study of the topography and of the superficial structures associated with these undulations reveals that the undulations delineated in the Alpine Domain result from the Tertiary compression which shaped the Alps. The Armorican Domain was first created during the Lower to Middle Cretaceous opening of the Bay of Biscay. It is now slightly affected by the Tertiary to Quaternary closure of this Bay. The Pyrenean Domain was successively shaped by the Lower Cretaceous oblique opening of the Bay of Biscay and by the Upper Cretaceous to Eocene northward displacement of Spain. Comparison between the Moho undulations map and the stress map of France reveals that most of the undulations are perpendicular to the actual shortening directions. This observation suggests that the Mesozoic, Cenozoic and Quaternary stress directions were roughly the same. Massif Central is characterized by the convergence of these three sets of undulations. Its Post-Oligocene uplift was probably the result of the converging stresses recognized in the three surrounding domains. When the Moho undulations and the topography are compared, two types of periodic crustal instabilities can be recognized. One corresponds to the buckling of the crust developed under compression, the other to boudinage which was associated with extension. Both phenomena show a typical wavelength of 200–250 km which is in agreement with the results of the actual physical and numerical modeling currently available.  相似文献   

11.
The mapped stress field of Western Europe reflects the tectonic process active there. A traverse of stress measurements from the Alps and through their northern foreland to the southern border of the Lower Rhine Embayment identifies three distinct stress sub-provinces; the Western Alps, the blocks on both flanks of the Rhinegraben, and the Rhenish Shield. The Alps have high magnitude stresses up to 35 MPa in the direction of maximum compression, here called δ1h. The general direction of δ1h is about 140°. The foreland has the same directional trend of δ1h with a magnitude reduced to about 2.0 MPa. Local anomalies in magnitude and direction occur along the course of the Rhinegraben which is a site of active sinistral shear. The Rhenish Shield shows an internal zonation of the stress field. The magnitudes of the stresses are low (usually negative) along the axis connecting the northern end of the Rhinegraben with the rifting of the Lower Rhine Embayment. The direction there is about 150°. On the eastern and western flanks of the shield the stress directions are essentially the same as in the southern blocks. These zones are distant from the belt of active strain release, consequently stresses of up to 4.0 MPa have accumulated.  相似文献   

12.
Balanced and restored cross-sections through the central and eastern Pyrenees, constructed using both surface and borehole data, demonstrate the presence of c.18km of shortening above a flat lying N-directed Alpine décollement surface. Hangingwall diagrams show how the North Pyrenean satellite massifs are culminations within this thrust system. Pre-thrusting structures such as subhorizontal stretching lineations in the North Pyrenean Fault zone became rotated above these culminations as the North Pyrenean Fault was cut by Alpine thrusts. Stratigraphic evidence demonstrates that N-directed thrust movements occurred between mid Eocene and Oligocene time, and this is similar to the age of major S-directed thrust movements on the south side of the Axial Zone. The N-directed thrust system probably originated as a series of backthrusts to the dominant S-directed structures.  相似文献   

13.
Basic concepts of structural restoration are applied to crustal cross-sections through mountain belts to explore large-scale tectonic models and deep structure. However, restored sections should account for variations in pre-orogenic crustal thicknesses. Crustal balancing approaches are reviewed and applied to two Alpine sections, coinciding with deep seismic experiments: NRP-20 East (Central Alps) and ECORS-CROP (Western Alps). Existing studies assume large (>300 km) orogenic contraction and only moderately thinned pre-orogenic crust. The resulting restored sections contain more crust than is imaged beneath the present-day Alps, the missing crust generally assumed to be subducted. Two kinematic modifications reduce the requirement for subduction: thinning and buoyancy-driven return flow of ultra-high-pressure metamorphic rocks during orogenesis; and pre-orogenic hyperextension. Using large stretching factors for the pre-orogenic crust negates crustal subduction on both Alpine transects. If the lower crust was approximately rigid, restorations of the Central Alps require strongly depth-heterogeneous stretching of upper and lower crust during Mesozoic rifting. Relaxing this requirement allows uniform lithospheric stretching, a corollary consistent with published subsidence estimates. Restorations make implicit statements on the form of pre-orogenic basins and the structure of continental margins incorporated into mountain belts that can in turn provide tests of tectonic models.  相似文献   

14.
From surface and subsurface data, line-length and area balancing were used to construct four balanced and restored sections of the Pyrenees. In the Mesozoic cover, a thin-skinned tectonic model is used. In the basement an anticlinal stack geometry is applied for the foreland part of the thrust nappes. We present and discuss three possible models for the deep structures of the belt: a thin-skinned tectonic model, a thick-skinned tectonic model and an inhomogeneous strain model. The thrusts steepen downwards and the displacements die out in ductile deformation deep in the section. Therefore, we use the inhomogeneous strain model and we equal-area balance the surface of the continental crust.Hanging-wall sequence diagrams are constructed taking into account (1) the strong N-S thickness variations of the Mesozoic cover related to the Cretaceous drift of Spain and (2) the related crustal thinning of the North Pyrenean Zone superimposed upon a previous late Hercynian rise of the lower crust.The Moho step at the vertical of the North Pyrenean Fault results from the thinning of the North Pyrenean Zone. The thickening of both the Axial Zone and the North Pyrenean Zone during the Eocene compressional event preserved the step geometry.Calculated values of the minimum shortening range from 55 km in the western part of the belt to 80 km in the eastern part. Most of the shortening occurs south of the North Pyrenean Fault in the eastern part (Axial Zone) and north of the North Pyrenean Fault in the western part (Labourd thrust).  相似文献   

15.
The main steps of the sedimentary evolution of the west Lombardian South Alpine foredeep between the Eocene and the Early Miocene are described. The oldest is a Bartonian carbonate decrease in hemipelagic sediments linked with an increase in terrigenous input, possibly related to a rainfall increase in the Alps. Between the Middle Eocene and the early Chattian, a volcanoclastic input is associated with an extensional tectonic regime, coeval with magma emplacement in the southern-central Alps, and with volcanogenic deposits of the European foredeep and Apennines, suggesting a regional extensional tectonic phase leading to the ascent of magma. During Late Eocene to Early Oligocene, two periods of coarse clastic sedimentation occurred, probably controlled by eustasy. The first, during Late Eocene, fed by a local South Alpine source, the second, earliest Oligocene in age, supplied by the Central Alps. In the Chattian, a strong increase in coarse supply records the massive erosion of Central Alps, coupled with a structures growth phase in the subsurface; it was followed by an Aquitanian rearrangement of the Alpine drainage systems suggested by both petrography of clastic sediments and retreat of depositional systems, while subsurface sheet-like geometry of Aquitanian turbidites marks a strong decrease in tectonic activity.  相似文献   

16.
More than 50% of the Alps expose fragments of Palaeozoic basement which were assembled during the Alpine orogeny. Although the tectonic and metamorphic history of the basement units can be compared to that of the Variscan crust in the Alpine foreland, most of the basement pieces of the Alps do not represent the direct southern continuation of Variscan structural elements evident in the Massif Central, the Vosges–Black Forest or the Bohemian massif. The basement units of the Alps all originated at the Gondwana margin. They were derived from a Precambrian volcanic arc suture fringing the northern margin of Gondwana, from which they were rifted during the Cambrian–Ordovician and Silurian. A short-lived Ordovician orogenic event interrupted the general rifting tendency at the Gondwana active margin. After the Ordovician, the different blocks drifted from the Gondwana margin to their Pangea position, colliding either parallel to Armorica with Laurussia or with originally peri-Gondwanan blocks assembled presently in Armorica. From the Devonian onwards, many basement subunits underwent the complex evolution of apparently oblique collision and nappe stacking. Docking started in the External massifs, the Penninic and Lower and middle Austroalpine units in approximately Devonian/early Carboniferous times, followed by the Upper Austroalpine and the South Alpine domains, in the Visean and the Namurian times, respectively. Wrenching is probably the best mechanism to explain all syn and post-collisional phenomena since the Visean followed by post-orogenic collapse and extension. It explains the occurrence of strike-slip faults at different crustal levels, the formation of sedimentary troughs as well as the extrusion and intrusion of crustal and mantle-derived magmas, and allows for contemporaneous rapid uplift of lower crustal levels and their erosion. From the Stephanian onwards, all regions were deeply eroded by large river systems.  相似文献   

17.
New petrographic, isotopic-geochemical, and mineralogical data are presented for the volcanic rocks of the Chichinautzin region of the Trans-Mexican volcanic belt (TMVB). The geological setting and the peculiarities of the composition of the volcanic rocks from different regions of the belt are compared to the plume-related volcanic rocks from the areas of the Gulf of California, Central America, and the Galapagos hot spot. It was concluded that the composition of the intraplate rocks from the western and eastern parts of the TMVB was subjected to the Californian and Galapagos plumes, respectively. In its turn, the ascending mantle plumes provoke melting of the subcontinental lithospheric mantle related to the formation of islandarc rocks. The model of the consecutive propagating rifting in the eastward direction suggested by some researchers (Marquez et al., 1999; Verma, 2001) instead of the subduction hypothesis is in agreement with the geological and geophysical data and the isotopic-geochemical peculiarities of the volcanic rocks within the TMVB.  相似文献   

18.
Abstract

Positive structural inversion involves the uplift of rocks on the hanging-walls of faults, by dip slip or oblique slip movements. Controlling factors include the strike and dip of the earlier normal faults, the type of normal faults — whether they were listric or rotated blocks, the time lapsed since extension and the amount of contraction relative to extension. Steeply dipping faults are difficult to invert by dip slip movements; they form buttresses to displacement on both cover detachments and on deeper level but gently inclined basement faults. The decrease in displacement on the hanging-walls of such steep buttresses leads to the generation of layer parallel shortening, gentle to tight folds — depending on the amount of contractional displacement, back-folds and back-thrust systems, and short-cut thrust geometries — where the contractional fault slices across the footwall of the earlier normal fault to enclose a “floating horse”. However, early steeply dipping normal faults readily form oblique to strike slip inversion structures and often tramline the subsequent shortening into particular directions.

Examples are given from the strongly inverted structures of the western Alps and the weakly inverted structures of the Alpine foreland. Extensional faulting developed during the Triassic to Jurassic, during the initial opening of the central Atlantic, while the main phases of inversion date from the end Cretaceous when spreading began in the north Atlantic and there was a change of relative motion between Europe and Africa. During the mid-Tertiary well over 100 km of Alpine shortening took place; Alpine thrusts, often detached along, or close to, the basement-cover interface, stacking the late Jurassic to Cretaceous sediments of the post-extensional subsidence phase. These high level detachments were joined and breached by lower level faults in the basement which, in the external zones of the western Alps, generally reactivated and rotated the earlier east dipping half-graben bounding faults. The external massifs are essentially uplifted half-graben blocks. There was more reactivation and stacking of basement sheets in the eastern part of this external zone, where the faults had been rotated into more gentle dips above a shallower extensional detachment than on the steeper faults to the west.

There is no direct relationship between the weaker inversion of the Alpine foreland and the major orogenic contraction of the western Alps; the inversion structures of southern Britain and the Channel were separated from the Alps by a zone of rifting from late Eocene to Miocene which affected the Rhone, Bresse and Rhine regions. Though they relate to the same plate movements which formed the Alps, the weaker inversion structures must have been generated by within plate stresses, or from those emanating from the Atlantic rather than the Tethyan margin.  相似文献   

19.
The significance of late-stage fracturing in the European Alps in a large geodynamic context is reappraised by studying brittle deformations over the entire belt. In the internal Western Alps, paleostress datasets display a major occurrence of orogen-parallel extension resulting in normal faulting and associated strike-slip mode. There the direction of subhorizontal extension rotates with the bending of the Alpine belt. In the Central Alps, paleostress tensors also indicate orogen-parallel extensional regimes, both in the Bergell area and the Lepontine Dome, where the brittle structures are associated with ductile structures related to the formation of large-scale upright folds that accommodate most of the collisional shortening due to the north-directed component of the movement of the South-Alpine indenter. This brittle deformation phase is of Miocene age and is coeval with the propagation of the Alpine front toward the external Alpine domains. In the Eastern Alps, brittle deformation of the Tauern Window displays an overwhelming occurrence of orogen-parallel normal faulting and associated strike-slip regimes again, which is inferred to be driven by lateral extrusion of the orogenic wedge toward the Pannonian basin, partly due to indentation on the Dolomites indenter. The major orogen-parallel extensional signal of the brittle Cenozoic deformations appears remarkably stable all over the internal Alps. Extensional brittle structures are part of a late phase of collisional deformation, during which the propagation of the Alpine front of the Western Alps and the northward movement of the Southern Alpine and the Dolomites indenters in the Central and Eastern Alps were accommodated by orogen-parallel extension in the inner zones, at the scale of the entire chain.  相似文献   

20.
New structural and stratigraphic data for a selected area of the Ligurian Alps are combined in order to assess and discuss the role played by extensional structures in the southernmost segment of the Western Alps during thrusting. Restored cross-sections and field data suggest that the structural style in the external sector of the chain may depend upon the presence of pre-orogenic normal faults ascribed to three extensional events linked to different geodynamic contexts: (i) Permian post-Variscan plate reorganisation, (ii) Mesozoic rifting–drifting phases leading to the opening of the Alpine Tethys, and (iii) Eocenic development of the European foreland basins. During positive inversion in Eocene times, a thin-skinned thrust system developed in this area, followed by a thick-skinned phase. In both situations the inherited extensional structures played fundamental roles: during the thin-skinned phase they conditioned the thrusting sequence, also producing large-scale buckle folds and partial reactivations; during the thick-skinned phase the strain was compartmentalized and partitioned by pre-existing faults.The kinematic model of the external sectors of the Ligurian chain also allows the re-assessment of the Alpine evolution of the front-foreland transition, including: (i) indirect confirmation that in the Eocene the Ligurian Briançonnais and Dauphinois domains were not separated by the Valais-Pyrenean oceanic basin; (ii) that the thin-skinned phase progressively changed into thick-skinned; (iii) the assertion that there were no significant deformations from the Oligocene to the present-day, and the Corsica–Sardinia block rotation only produced a change in orientation of previously formed structures and normal fault system development.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号