首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Deuterium and oxygen isotope fractionations between liquid and vapor water were experimentally-determined during evaporation of a NaCl solution (35 g L−1) as a function of water temperature and wind velocity. In the case of a null wind velocity, slopes of δD-δ18O trajectories of residual waters hyperbolically decrease with increasing water temperatures in the range 23-47 °C. For wind velocities ranging from 0.8 to 2.2 m s−1, slopes of the δD-δ18O trajectories linearly increase with increasing wind velocity at a given water temperature. These experimental results can be modeled by using Rayleigh distillation equations taking into account wind-related kinetics effects. Deuterium and oxygen isotope compositions of water inclusions trapped by the precipitated halite crystals were determined by micro-equilibration techniques.These isotopic compositions accurately reflect those of the surrounding residual waters during halite growth. Isotopic compositions of water inclusions in twenty natural halites from the Messinian Realmonte mine in Sicily suggest precipitation temperatures of that match the homogenization temperatures obtained by microthermometry (median = 34 ± 5 °C). The similarity between the measured and experimental slopes of the δD-δ18O evaporation trajectories suggests that the effect of wind was negligible during the genesis of these halite deposits. Hydrogen and oxygen isotope compositions of water inclusions from Realmonte halite also define a linear trend whose extrapolation until intersection with the Mediterranean Meteoric Water Line allows the characterization of the water source with δD and δ18O values of −70 ± 10‰ and −11.5 ± 1.5‰, respectively. These results reveal that the huge amounts of salts deposited in Sicily result from the evaporation of seawater mixed with a dominant fraction (?50%) of meteoric waters most likely deriving from alpine fluvial discharge.  相似文献   

2.
Kaolinite, gibbsite and quartz are the dominant minerals in samples collected from two outcrops of a Cenomanian (∼95 Ma) laterite in southwestern Minnesota. A combination of measured yields and isotope ratios permitted mass balance calculations of the δD and δ18O values of the kaolinite in these samples. These calculations yielded kaolinite δD values of about −73‰ and δ18O values of about +18.7‰. The δD and δ18O values appear to preserve information on the ancient weathering system.If formed in hydrogen and oxygen isotope equilibrium with water characterized by the global meteoric water line (GMWL), the kaolinite δD and δ18O values indicate a crystallization temperature of 22 (±5) °C. A nominal paleotemperature of 22 °C implies a δ18O value for the corresponding water of −6.3‰. The combination of temperature and meteoric water δ18O values is consistent with relatively intense rainfall at that mid-paleolatitude location (∼40°N) on the eastern shore of the North American Western Interior Seaway. The inferred Cenomanian paleosol temperature of ∼22 °C is in general accord with published mid-Cretaceous continental mean annual temperatures (MAT) estimated from leaf margin analyses of fossil plants.When compared with results from a published GCM-based Cenomanian climate simulation which specifies a latitudinal sea surface temperature (SST) gradient that was either near modern or smaller-than-modern, the kaolinite paleotemperature of 22 °C is closer to the GCM-predicted MAT for a smaller equator-to-pole temperature difference in the mid-Cretaceous. Moreover, the warm, kaolinite-derived, mid-paleolatitude temperature of 22 °C is associated with proxy estimates of high concentrations of atmospheric CO2 in the Cenomanian. The overall similarity of proxy and model results suggests that the general features of Cenomanian continental climate in that North American locale are probably being revealed.  相似文献   

3.
Two types of laboratory experiments were used to quantify magnesium isotopic fractionations associated with chemical and thermal (Soret) diffusion in silicate liquids. Chemical diffusion couples juxtaposing a molten natural basalt (SUNY MORB) and a molten natural rhyolite (Lake County Obsidian) were run in a piston cylinder apparatus and used to determine the isotopic fractionation of magnesium as it diffused from molten basalt to molten rhyolite. The thermal diffusion experiments were also run in a piston cylinder apparatus but with a sample made entirely of molten SUNY MORB displaced from the hotspot of the assembly furnace so that the sample would have a temperature difference of about 100-200 °C from one end to the other. The chemical diffusion experiments showed fractionations of 26Mg/24Mg by as much as 7‰, which resulted in an estimate for the mass dependence of the self-diffusion coefficients of the magnesium isotopes corresponding to D26Mg/D24Mg=(24/26)β with β = 0.05. The thermal diffusion experiments showed that a temperature difference of about 100 °C resulted in the MgO, CaO, and FeO components of the basalt becoming slightly enriched by about 1 wt% in the colder end while SiO2 was enriched by several wt% in the hotter end. The temperature gradient also fractionated the magnesium isotopes. A temperature difference of about 150 °C produced an 8‰ enrichment of 26Mg/24Mg at the colder end relative to the hotter end. The magnesium isotopic fractionation as a function of temperature in molten basalt corresponds to 3.6 × 10−2‰/°C/amu.  相似文献   

4.
The δ18O of ground water (−13.54 ± 0.05 ‰) and inorganically precipitated Holocene vein calcite (+14.56 ± 0.03 ‰) from Devils Hole cave #2 in southcentral Nevada yield an oxygen isotopic fractionation factor between calcite and water at 33.7 °C of 1.02849 ± 0.00013 (1000 ln αcalcite-water = 28.09 ± 0.13). Using the commonly accepted value of ∂(αcalcite-water)/∂T of −0.00020 K−1, this corresponds to a 1000 ln αcalcite-water value at 25 °C of 29.80, which differs substantially from the current accepted value of 28.3. Use of previously published oxygen isotopic fractionation factors would yield a calcite precipitation temperature in Devils Hole that is 8 °C lower than the measured ground water temperature. Alternatively, previously published fractionation factors would yield a δ18O of water, from which the calcite precipitated, that is too negative by 1.5 ‰ using a temperature of 33.7 °C. Several lines of evidence indicate that the geochemical environment of Devils Hole has been remarkably constant for at least 10 ka. Accordingly, a re-evaluation of calcite-water oxygen isotopic fractionation factor may be in order.Assuming the Devils Hole oxygen isotopic value of αcalcite-water represents thermodynamic equilibrium, many marine carbonates are precipitated with a δ18O value that is too low, apparently due to a kinetic isotopic fractionation that preferentially enriches 16O in the solid carbonate over 18O, feigning oxygen isotopic equilibrium.  相似文献   

5.
Saline groundwaters were recovered from undisturbed (Restigouche deposit) and active (Brunswick #12 mine) Zn-Pb volcanogenic massive sulfide deposits in the Bathurst Mining Camp (BMC), northern New Brunswick, Canada. These groundwaters, along with fresh to brackish meteoric ground and surface waters from the BMC, have been analyzed to determine their major, trace element and stable isotopic (O, H, C, and B) compositions. Saline groundwaters (total dissolved solids = 22-45 g/L) are characterized by relatively high Na/Ca ratios compared to brines from the Canadian Shield and low Na/Clmolar and δ11B isotopic compositions (−2.5‰ to 11.1‰) compared to seawater. Although saline waters from the Canadian Shield commonly have oxygen and hydrogen isotopic compositions that plot to the left of the global meteoric water line, those from the BMC fall close to the water line. Fracture and vein carbonate minerals at the Restigouche deposit have restricted carbon isotopic compositions of around −5‰ to −6‰. The carbon isotopic compositions of the saline waters at the Restigouche deposit (+12‰ δ13CDIC) are the result of fractionation of dissolved inorganic carbon by methanogenesis. We suggest that, unlike previous models for shield brines, the composition of saline waters in the BMC is best explained by prolonged water-rock reaction, with no requirement of precursor seawater. We suggest that elevated Br/Cl ratios of saline waters compared to seawater may be explained by differential uptake of Br and Cl during groundwater evolution through water-rock reaction.  相似文献   

6.
In the Schwarzwald area, southwest Germany, more than 400 hydrothermal veins hosting different gangue and ore mineral assemblages cross-cut the crystalline basement rocks. Many of the post-Variscan fluorite-barite-quartz veins are considered to have precipitated through mixing of a deep saline brine with meteoric, low salinity waters. This hypothesis was tested using carbon, sulfur, and oxygen isotope data of sulfides, sulfates and calcite, coupled with fluid inclusion studies. Primary hydrothermal calcites from the deposits show a positive correlation of their δ13C (V-PDB) and δ18O (V-SMOW) values, which range from −12 to −3‰ and from 12 to 18.5‰, respectively. Carbon and oxygen isotope compositions of paragenetically young, remobilized calcite types are shifted towards higher values and range from −12 to −1‰ and from 20 to 25‰, respectively. We developed an improved calculation procedure for modeling the covariation of carbon and oxygen isotopes in calcite resulting from mixing of two fluids with different isotopic compositions and total carbon concentrations. In our model, the carbon speciation in the two model fluid end-members and the fluid mixtures are calculated using a speciation and reaction path code. The carbon and oxygen isotope covariation of primary Schwarzwald calcites can effectively be modeled by a mixing trend of a deep saline brine and a meteoric, low salinity water. Sulfur isotope data of barites from 44 hydrothermal fluorite-barite-quartz veins vary from 9 to 18‰ (CDT), sulfide ore minerals show δ34S values between −14.4 and 2.9‰. Calculated sulfide-sulfate equilibrium temperatures are in the range between 300 and 350 °C. These temperatures differ significantly from the formation temperatures of 150 to 200 °C of most of the deposits as estimated from fluid inclusions, and are interpreted as preserved paleotemperatures of the deep aquifer. This assumption has been carefully checked against possible contamination of an equilibrated sulfide-sulfate system from the deep aquifer with sulfate from surface-derived sources, considering also the kinetics of the sulfide-sulfate isotope exchange. A combination of the S isotopic results with microthermometric fluid inclusion data and constraints on the temperature of the meteoric water was used to calculate mixing ratios of the two fluid end-members. The results indicate that mass fractions of the deep saline brine in the mixed fluid were between 0.5 and 0.75. Considering all geologic, geochemical and isotopic information, we propose that the majority of the post-Variscan hydrothermal veins in the Schwarzwald area were precipitated by district-scale mixing of a homogeneous deep saline brine with meteoric waters.  相似文献   

7.
The Reykjanes geothermal system is located on the landward extension of the Mid-Atlantic Ridge in southwest Iceland, and provides an on-land proxy to high-temperature hydrothermal systems of oceanic spreading centers. Previous studies of elemental composition and salinity have shown that Reykjanes geothermal fluids are likely hydrothermally modified seawater. However, δD values of these fluids are as low as −23‰, which is indicative of a meteoric water component. Here we constrain the origin of Reykjanes hydrothermal solutions by analysis of hydrogen and oxygen isotope compositions of hydrothermal epidote from geothermal drillholes at depths between 1 and 3 km. δDEPIDOTE values from wells RN-8, -9, -10 and -17 collectively range from −60 to −78‰, and δ18OEPIDOTE in these wells are between −3.0 and 2.3‰. The δD values of epidote generally increase along a NE trend through the geothermal field, whereas δ18O values generally decrease, suggesting a southwest to northeast migration of the geothermal upflow zone with time that is consistent with present-day temperatures and observed hydrothermal mineral zones. For comparative analysis, the meteoric-water dominated Nesjavellir and Krafla geothermal systems, which have a δDFLUID of ∼ −79‰ and −89‰, respectively, show δDEPIDOTE values of −115‰ and −125‰. In contrast, δDEPIDOTE from the mixed meteoric-seawater Svartsengi geothermal system is −68‰; comparable to δDEPIDOTE from well RN-10 at Reykjanes.Stable isotope compositions of geothermal fluids in isotopic equilibrium with the epidotes at Reykjanes are computed using published temperature dependent hydrogen and oxygen isotope fractionation curves for epidote-water, measured isotope composition of the epidotes and temperatures approximated from the boiling point curve with depth. Calculated δD and δ18O of geothermal fluids are less than 0‰, suggesting that fluids of meteoric or glacial origin are a significant component of the geothermal solutions. Additionally, δDFLUID values in equilibrium with geothermal epidote are lower than those of modern-day fluids, whereas calculated δ18OFLUID values are within range of the observed fluid isotope composition. We propose that modern δDEPIDOTE and δDFLUID values are the result of diffusional exchange between hydrous alteration minerals that precipitated from glacially-derived fluids early in the evolution of the Reykjanes system and modern seawater-derived geothermal fluids. A simplified model of isotope exchange in the Reykjanes geothermal system, in which the average starting δDROCK value is −125‰ and the water to rock mass ratio is 0.25, predicts a δDFLUID composition within 1‰ of average measured values. This model resolves the discrepancy between fluid salinity and isotope composition of Reykjanes geothermal fluids, explains the observed disequilibrium between modern fluids and hydrothermal epidote, and suggests that rock-fluid interaction is the dominant control over the evolution of fluid isotope composition in the hydrothermal system.  相似文献   

8.
There is considerable debate about the mode and age of formation of large (up to ∼200 m long) hematite and goethite ironstone bodies within the 3.2 to 3.5 Ga Barberton greenstone belt. We examined oxygen and hydrogen isotopes and Rare Earth Element (REE) concentrations of goethite and hematite components of the ironstones to determine whether these deposits reflect formation from sea-floor vents in the Archean ocean or from recent surface and shallow subsurface spring systems. Goethite δ18O values range from −0.7 to +1.0‰ and δD from −125 to −146‰, which is consistent with formation from modern meteoric waters at 20 to 25 °C. Hematite δ18O values range from −0.7 to −2.0‰, which is consistent with formation at low to moderate temperatures (40-55 °C) from modern meteoric water. REE in the goethite and hematite are derived from the weathering of local sideritic ironstones, silicified ultramafic rocks, sideritic black cherts, and local felsic volcanic rocks, falling along a mixing line between the Eu/Eu* and shale-normalized HREEAvg/LREEAvg values for the associated silicified ultramafic rocks and felsic volcanic rocks. Contrasting positive Ce/Ce* of 1.3 to 3.5 in hematite and negative Ce/Ce* of 0.2 to 0.9 in goethite provides evidence of oxidative scavenging of Ce on hematite surfaces during mineral precipitation. These isotopic and REE data, taken together, suggest that hematite and goethite ironstone pods formed from relatively recent meteoric waters in shallow springs and/or subsurface warm springs.  相似文献   

9.
Sixteen groundwater samples collected from production wells tapping Lower Cretaceous Nubian Sandstone and fractured basement aquifers in Sinai were analyzed for their stable isotopic compositions, dissolved noble gas concentrations (recharge temperatures), tritium activities, and 14C abundances. Results define two groups of samples: Group I has older ages, lower recharge temperatures, and depleted isotopic compositions (adjusted 14C model age: 24,000–31,000 yr BP; δ18O: − 9.59‰ to − 6.53‰; δ2H: − 72.9‰ to − 42.9‰; < 1 TU; and recharge T: 17.5–22.0°C) compared to Group II (adjusted 14C model age: 700–4700 yr BP; δ18O: − 5.89‰ to − 4.84‰; δ2H: − 34.5‰ to − 24.1‰; < 1 to 2.78 TU; and recharge T: 20.6–26.2°C). Group II samples have isotopic compositions similar to those of average modern rainfall, with larger d-excess values than Group I waters, and locally measurable tritium activity (up to 2.8 TU). These observations are consistent with (1) the Nubian Aquifer being largely recharged prior to and/or during the Last Glacial Maximum (represented by Group I), possibly through the intensification of paleowesterlies; and (2) continued sporadic recharge during the relatively dry and warmer interglacial period (represented by Group II) under conditions similar to those of the present.  相似文献   

10.
Tri-octahedral Li-Mg smectites (hectorites) were synthesized at temperatures ranging from 25 to 250 °C, in the presence of solutions highly enriched in lithium. After removing all the exchangeable lithium from the synthesized clays, Li isotope fractionation (Δ7Liclay-solution) was determined. This fractionation was linked to Li incorporation into the structural octahedral site, substituting for Mg2+. As predicted, experimental Δ7Liclay-solution inversely correlates with temperature, and ranges from −1.6‰ ± 1.3‰ at 250 °C to −10.0‰ ± 1.3‰ at 90 °C, and then stays relatively constant down to 25 °C. The relatively constant isotope fractionation factor below 90 °C may be due to high concentrations of edge octahedra in low crystallinity smectites. The isotopic fractionation factor (α), for a given temperature, does not depend on the solution matrix, nor on the amount of structural Li incorporated into the clay. Empirical linear laws for α as a function of 1/T (K) were inferred. Smectite Li contents and smectite-solution distribution coefficients (DLi/Mg) increase with temperature, as expected for a substitution process. The fractions of dissolved Li incorporated into the smectite octahedral sites are small and do not depend on the duration of the experiment. In a seawater-like matrix solution, less Li is incorporated into the smectites, probably as a result of competition with dissolved Mg2+ ions for incorporation into the octahedral sites. The high Li contents observed in marine smectites are therefore best explained either by a significant contribution from basalts, by adsorption processes, or by the influence of seawater chemical composition on distribution coefficients. We also calculate, using present-day estimates of hydrothermal water and river fluxes, that a steady-state ocean would require a relatively large global clay-water Li isotope fractionation (−12‰ to −21‰). This study demonstrates the ability of laboratory experiments to quantify the impact of secondary phases on the Li geochemical cycle and associated isotope fractionations.  相似文献   

11.
We present high-precision measurements of Mg and Fe isotopic compositions of olivine, orthopyroxene (opx), and clinopyroxene (cpx) for 18 lherzolite xenoliths from east central China and provide the first combined Fe and Mg isotopic study of the upper mantle. δ56Fe in olivines varies from 0.18‰ to −0.22‰ with an average of −0.01 ± 0.18‰ (2SD, n = 18), opx from 0.24‰ to −0.22‰ with an average of 0.04 ± 0.20‰, and cpx from 0.24‰ to −0.16‰ with an average of 0.10 ± 0.19‰. δ26Mg of olivines varies from −0.25‰ to −0.42‰ with an average of −0.34 ± 0.10‰ (2SD, n = 18), opx from −0.19‰ to −0.34‰ with an average of −0.25 ± 0.10‰, and cpx from −0.09‰ to −0.43‰ with an average of −0.24 ± 0.18‰. Although current precision (∼±0.06‰ for δ56Fe; ±0.10‰ for δ26Mg, 2SD) limits the ability to analytically distinguish inter-mineral isotopic fractionations, systematic behavior of inter-mineral fractionation for both Fe and Mg is statistically observed: Δ56Feol-cpx = −0.10 ± 0.12‰ (2SD, n = 18); Δ56Feol-opx = −0.05 ± 0.11‰; Δ26Mgol-opx = −0.09 ± 0.12‰; Δ26Mgol-cpx = −0.10 ± 0.15‰. Fe and Mg isotopic composition of bulk rocks were calculated based on the modes of olivine, opx, and cpx. The average δ56Fe of peridotites in this study is 0.01 ± 0.17‰ (2SD, n = 18), similar to the values of chondrites but slightly lower than mid-ocean ridge basalts (MORB) and oceanic island basalts (OIB). The average δ26Mg is −0.30 ± 0.09‰, indistinguishable from chondrites, MORB, and OIB. Our data support the conclusion that the bulk silicate Earth (BSE) has chondritic δ56Fe and δ26Mg.The origin of inter-mineral fractionations of Fe and Mg isotopic ratios remains debated. δ56Fe between the main peridotite minerals shows positive linear correlations with slopes within error of unity, strongly suggesting intra-sample mineral-mineral Fe and Mg isotopic equilibrium. Because inter-mineral isotopic equilibrium should be reached earlier than major element equilibrium via chemical diffusion at mantle temperatures, Fe and Mg isotope ratios of coexisting minerals could be useful tools for justifying mineral thermometry and barometry on the basis of chemical equilibrium between minerals. Although most peridotites in this study exhibit a narrow range in δ56Fe, the larger deviations from average δ56Fe for three samples likely indicate changes due to metasomatic processes. Two samples show heavy δ56Fe relative to the average and they also have high La/Yb and total Fe content, consistent with metasomatic reaction between peridotite and Fe-rich and isotopically heavy melt. The other sample has light δ56Fe and slightly heavy δ26Mg, which may reflect Fe-Mg inter-diffusion between peridotite and percolating melt.  相似文献   

12.
Although commonly utilized in continental geothermal work, the water-hydrogen and methane-hydrogen isotope geothermometers have been neglected in hydrothermal studies. Here we report δD-CH4 and δD-H2 values from high-temperature, black smoker-type hydrothermal vents and low-temperature carbonate-hosted samples from the recently discovered Lost City Hydrothermal Field. Methane deuterium content is uniform across the dataset at − 120 ± 12‰. Hydrogen δD values vary from − 420‰ to − 330‰ at high-temperature vents to − 700‰ to − 600‰ at Lost City. The application of several geothermometer equations to a suite of hydrothermal vent volatile samples reveals that predicted temperatures are similar to measured vent temperatures at high-temperature vents, and 20-60 °C higher than those measured at the Lost City vents. We conclude that the overestimation of temperature at Lost City reflects 1) that methane and hydrogen are produced by serpentinization at > 110 °C, and 2) that isotopic equilibrium at temperatures < 70 °C is mediated by microbial sulfate reduction. The successful application of hydrogen isotope geothermometers to low-temperature Lost City hydrothermal samples encourages its employment with low-temperature diffuse hydrothermal fluids.  相似文献   

13.
Despite their great importance in low-temperature geochemistry, diffusion coefficients of noble gas isotopes in liquid water (D) have been measured only for the major isotopes of helium, neon, krypton and xenon. Data on the diffusion coefficients of minor noble gas isotopes are essentially non-existent and so typically have been estimated by a kinetic-theory model in which D varies as the inverse square root of the isotopic mass (m): D ∝ m−0.5. To examine the validity of the kinetic-theory model, we performed molecular dynamics (MD) simulations of the diffusion of noble gases in ambient liquid water. Our simulation results agree with available experimental data on the solvation structure and diffusion coefficients of the major noble gas isotopes and reveal for the first time that the isotopic mass-dependence of all noble gas self-diffusion coefficients has the power-law form D ∝ m−β with 0 < β < 0.2. Thus our results call into serious question the widespread assumption that the ‘square-root’ model can be applied to estimate the kinetic fractionation of noble gas isotopes caused by diffusion in ambient liquid water. To illustrate the importance of this finding, we used the diffusion coefficients determined in our MD simulations to reconsider the geochemical modeling of 20Ne/22Ne and 36Ar/40Ar isotopic ratios in three representative hydrologic studies. Our new modeling results indicate that kinetic isotopic fractionation by diffusion may play a significant role in noble gas transport processes in groundwater.  相似文献   

14.
We employed the thin source technique to investigate tracer diffusion of Mg, Ca, Sr, and Ba in glasses and supercooled melts of albite (NaAlSi3O8) and jadeite (NaAlSi2O6) compositions. The experiments were conducted at 1 bar and at temperatures between 645 and 1025°C. Typical run durations ranged between 30 min and 35 days. The analysis of the diffusion profiles was performed with the electron microprobe. Diffusivities of Ca, Sr, and Ba were found to be independent of either duration t of the experiment or tracer concentration M, initially introduced into the sample. Mg exhibits a diffusivity depending on run time and concentration and tracer diffusivity is derived by extrapolation to M/√t = 0. Temperature dependence of the diffusivity D can be represented by an Arrhenius equation D = Do exp(−Ea/RT), yielding the following least-squares fit parameters (with D in m2/s and Ea in kJ/mol): DMg = 1.8 · 10−5 exp(−234 ± 20/RT), DCa = 3.5 · 10−6 exp(−159 ± 6/RT), DSr = 3.6 · 10−6 exp(−160 ± 6/RT), and DBa = 6.0 · 10−6 exp(−188 ± 12/RT) for albite; and DMg = 8.3 · 10−6 exp(−207 ± 18/RT), DCa = 3.8 · 10−6 exp(−153 ± 4/RT), DSr = 2.3 · 10−6 exp(−150 ± 4/RT), and DBa = 3.7 · 10−5 exp(−198 ± 4/RT) for jadeite composition. Ca and Sr diffusivities agree within error in both compositions and exhibit the fastest diffusivities, whereas Mg reveals the lowest diffusivity. The relationship between activation energy and radius shows a minimum at Ca and Sr for albite and jadeite compositions extending the relationship already observed elsewhere for alkalies. With increasing substitution of Si by (Na + Al), diffusivities increase, whereas activation energies decrease. Furthermore, a simple model modified from that of Anderson and Stuart (Anderson O. L. and Stuart D. A., “Calculation of activation energy of ionic conductivity in silica glasses by classical methods,” J. Am. Ceram. Soc.37, 573-580, 1954) is discussed for calculating the activation energies.  相似文献   

15.
The diffusion coefficients of Fe2+ and Mg in aluminous spinel at ∼20 kb, 950 to 1325°C, and at 30 kb, 1125°C have been determined via diffusion couple experiments and numerical modeling of the induced diffusion profiles. The oxygen fugacity, fO2, was constrained by graphite encapsulating materials. The retrieved self-diffusion coefficients of Fe2+ and Mg at ∼20 kb, 950 to 1325°C, fit well the Arrhenian relation, D = D0exp(−Q/RT), where Q is the activation energy, with D0(Fe) = 1.8 (±2.8) × 10−5, D0(Mg) = 1.9 (±1.4) × 10−5 cm2/s, Q(Fe) = 198 ± 19, and Q(Mg) = 202 ± 8 kJ/mol. Comparison with the data at 30 kb suggests an activation volume of ∼5 cm3/mol. From analysis of compositional zoning in natural olivine-spinel assemblages in ultramafic rocks, previous reports concluded that D(Fe-Mg) in spinel with Cr/(Cr + Al) ≤0.5 is ∼10 times that in olivine. The diffusion data in spinel and olivine have been applied to the problems of preservation of Mg isotopic inhomogeneity in spinel within the plagioclase-olivine inclusions in Allende meteorite and cooling rates of terrestrial ultramafic rocks.  相似文献   

16.
Samples produced in piston cylinder experiments were used to document the thermal isotopic fractionation of all the major elements of basalt except for aluminum and the fractionation of iron isotopes by chemical diffusion between a natural basalt and rhyolite. The thermal isotopic fractionations are summarized in terms of a parameter Ωi defined as the fractionation in per mil per 100 °C per atomic mass units difference between the isotopes. For molten basalt we report ΩCa = 1.6, ΩFe = 1.1, ΩSi = 0.6, ΩO = 1.5. In an earlier paper we reported ΩMg = 3.6. These fractionations represent a steady state balance between thermal diffusion and chemical diffusion with the mass dependence of the thermal diffusion coefficient being significantly larger than the mass dependence of the chemical diffusion coefficients for isotopes of the same element. The iron isotopic measurements of the basalt-rhyolite diffusion couple showed significant fractionation that are parameterized in terms of a parameter βFe = 0.03 when the ratio of the diffusion coefficients D54 and D56 of 54Fe and 56Fe is expressed in terms of the atomic mass as D54/D56 = (56/54)βFe. This value of βFe is smaller than what we had measured earlier for lithium, magnesium and calcium (i.e., βLi = 0.215, βCa = 0.05, βMg = 0.05) but still significant when one takes into account the high precision with which iron isotopic compositions can be measured (i.e., ±0.03‰) and that iron isotope fractionations at magmatic temperatures from other causes are extremely small. In a closing section we discuss technological and geological applications of isotopic fractionations driven by either or both chemical and thermal gradients.  相似文献   

17.
Ultramafic rocks of the Duke Island Complex in southeastern Alaska crystallized in a supra-subduction zone setting, but the serpentinization of olivine-bearing rocks involved the incursion of late-stage meteoric waters. Three textural types of serpentine (primarily lizardite) have been identified which in part reflect progress in reactions during multiple stages of fluid infiltration. The overall mesh texture of serpentine has been subdivided into a massive-type, found in dunites and wehrlites, and a dendritic-type found in wehrlites and olivine clinopyroxenites. Serpentine veins represent a late-stage in the hydrothermal alteration process. Both FeO contents and δ18O values of the three textural types of serpentine are variable at the centimeter scale. Magnetite abundance in association with serpentine is also variable with up to 5 vol% of magnetite found in samples with dendritic serpentine. Continued reaction of FeO-bearing serpentine with fluid appears to control the formation of most magnetite. Oxygen isotope ratios of the three textural types of serpentine are distinct, with the massive variety characterized by δ18O values between −3‰ and 3‰, the dendritic variety showing values between 2‰ and 6‰ and the veins having the highest values between 4‰ and 10‰. Although the δ18O values may vary by as much as 5‰ on the centimeter scale, δD values tend to show relatively less variation with over 90% of the measured values between −100‰ and −120‰. The O and H isotopic values are consistent with the involvement of meteoric water that had undergone variable degrees of isotopic exchange with country rocks prior to reacting with olivine in the Duke Island Complex. Small-scale variability in both serpentine FeO content and δ18O values suggests that chemical and isotopic equilibria may have not been attained at larger than centimeter scales. Oxygen isotopic variability in serpentine produced during relatively low-temperature hydrothermal alteration is in large part a function of exchange mediated via fluid flow through microfractures.  相似文献   

18.
Diffusive isotopic fractionation factors are important in order to understand natural processes and have practical application in radioactive waste storage and carbon dioxide sequestration. We determined the isotope fractionation factors and the effective diffusion coefficients of chloride and bromide ions during aqueous diffusion in polyacrylamide gel. Diffusion was determined as functions of temperature, time and concentration. The effect of temperature is relatively large on the diffusion coefficient (D) but only small on isotope fractionation. For chlorine, the ratio, D35Cl/D37Cl varied from 1.00128 ± 0.00017 (1σ) at 2 °C to 1.00192 ± 0.00015 at 80 °C. For bromine, D79Br/D81Br varied from 1.00098 ± 0.00009 at 2 °C to 1.0064 ± 0.00013 at 21 °C and 1.00078 ± 0.00018 (1σ) at 80 °C. There were no significant effects on the isotope fractionation due to concentration. The lack of sensitivity of the diffusive isotope fractionation to anything at the most common temperatures (0 to 30 °C) makes it particularly valuable for application to understanding processes in geological environments and an important natural tracer in order to understand fluid transport processes.  相似文献   

19.
Some recent studies have suggested that the hydrogen isotopic composition (δD) of hydrothermal fluids, released in vacuo by thermal decrepitation of quartz, are not always accurately revealed. We report the results of a step-heating δD value study of vein quartz, hosted by Lower Palaeozoic rocks in SW England, which was analyzed by micro-FT-IR for hydrogen speciation, before and after fluid extraction at temperatures between 750 and 1500 °C. The δD values of individual aliquots of released water vary between −3‰ and −208‰, with the lowest values generally corresponding to the highest temperature fractions and samples of relatively low yield. The data show significant departures from geologically reasonable δD. Micro-FT-IR analyses show that a variety of OH species are present within the vein quartz, with significant intra and inter sample variation. Typically a broad absorption due to molecular water, in the region 3400 cm−1 is observed, along with bands attributed to Li-OH and Al-OH. On heating, the broad absorption due to molecular water is reduced, accompanied by a measurable loss of Li-OH species. The latter becomes more pronounced in the higher temperature fractions (>750 °C). These data support earlier studies which indicated that contributions from the contrasting OH reservoirs in quartz can significantly influence the reported δD values. These new data also suggest that the incorporation of OH released from Li-OH sites in the quartz may be the most important factor in the generation of the anomalous values for these samples.  相似文献   

20.
An Early Eocene Oxisol in the Ione Formation of California formed in a coastal continental weathering environment at a paleolatitude of ∼38°N. The dominant minerals in the Oxisol are goethite, quartz, and kaolinite. Material balance calculations were applied to new measurements of chemical composition, D/H, and 18O/16O ratios of Oxisol samples to determine the δD (−150 ± 3‰) and δ18O (−2.4 ± 0.3‰) values of the goethite (α-FeOOH). These data, in combination with the global meteoric water line (MWL), yielded an isotopic temperature of 21(±4) °C. The nominal value of 21 °C contrasts with the modern mean annual temperature (MAT) of 16 °C in that area. The warmer temperature is consistent with formation of the goethite during the Early Eocene climatic optimum. The isotopic composition of the goethite and a temperature of 21 °C imply ancient water with a δD value of −61(±4)‰ and a δ18O value of −8.9(±0.5)‰. This Early Eocene δ18O (or δD) value is more negative than values in the range of isotopic scatter observed for modern global precipitation at sites with a MAT of 21 °C.At times of warm global climates, the location of a near-surface atmospheric isotherm would generally shift relative to its location under modern climatic conditions. A simple Rayleigh-type condensation model indicates that, if one “follows the isotherm”, the associated scatter in δD and δ18O of precipitation in very warm global climates should shift (for a given isotherm) to more negative values that may be detectable in proxy records. The isotopic results from the goethite of the Early Eocene Oxisol appear to add to evidence in support of this idea.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号