共查询到20条相似文献，搜索用时 281 毫秒
1.
Laboratory measurements of ‘porosity‐free’ intrinsic Vp and Vs in an olivine gabbro of the Oman ophiolite: Implication for interpretation of the seismic structure of lower oceanic crust 
下载免费PDF全文
下载免费PDF全文 In order to determine ‘porosity‐free’ intrinsic ultrasonic compressional (Vp) and shear wave (Vs) velocities and Vp/Vs of an olivine gabbro from the Oman ophiolite, we developed a new experimental system using a piston‐cylinder type high‐pressure apparatus. The new system allowed us to measure velocities at pressures ranging from 0.20 to 1.00 GPa and at temperatures up to 300°C for Vp and 400°C for Vs. At room temperature, the Vp and Vp/Vs increase rapidly with pressure up to 0.40 GPa, while between 0.45 and 1.00 GPa the increase is more gradual. The change in increasing rate is attributed to closure of porosity at pressures above 0.45 GPa. Based on the linear regression of data obtained at higher pressures (0.45–1.00 GPa) and extrapolation to the lower pressures, combined with temperature derivatives of velocities of the sample measured at 1.00 GPa, we determined the intrinsic Vp and Vs of the sample as a function of pressure (P, in GPa) and temperature (T, in °C). The intrinsic velocities can be expressed as Vp (km/s) = 7.004 + 0.096 × P ? 0.00015 × T, and Vs (km/s) = 3.827 + 0.007 × P ? 0.00008 × T. We evaluated the intrinsic Vp and Vs of the olivine gabbro at oceanic crustal conditions and compared them with a velocity depth‐profile of the borehole seismic observatory WP‐2 area in the northwestern Pacific Basin. Although the intrinsic Vp (～7.0 km/s) and Vs (～3.8 km/s) for the olivine gabbro studied are comparable to those of seismic layer 3 in the WP‐2 area, the estimated vertical gradients of intrinsic velocities are significantly smaller than those reported from layer 3. These results suggest that velocity profiles of layer 3 in the WP‐2 area may reflect the presence of a minor porosity in lower oceanic crust, which closes with increasing depth and/or continuous changes in mineralogy of layer 3 rocks. 相似文献
2.
L. P. Vinnik M. Erduran S. I. Oreshin G. L. Kosarev Yu. A. Kutlu Ö Çakir S. G. Kiselev 《Izvestiya Physics of the Solid Earth》2014,50(5):622-631
The P- and S-wave receiver functions and dispersion curves of the fundamental Rayleigh wave are used to study the lithosphere within the Central Anatolian Plateau. The results for eight broadband seismic stations are presented. It is established that within the plateau, the crust with a thickness of about 35 km is underlain by the mantle lid with its bottom at a depth of about 60 km. The velocities of longitudinal (Vp) and shear (Vs) waves in this layer are at most 7.6 and 4.5 km/s, respectively, and the Vp/Vs ratio is close to 1.7 (i.e., by 6% lower than in the standard IASP91 and PREM models). Such a low velocity ratio is characteristic of rocks having high orthopyroxene content. Beneath the high-velocity mantle lid, the S-wave velocity decreases to 4.0–4.2 km/s and the Vp/Vs ratio is close to its standard value (1.8). At most stations, the P-wave receiver functions do not contain seismic phase P410s, which is formed at the global seismic boundary at a depth of 410 km. The seismic boundary at a depth of 410 km is related to the olivine-spinel phase transformation, and its absence can indicate the anomalously low olivine content and high basalt content. This anomaly is probably associated with the subduction of a large amount of oceanic crust during the closure of the Tethys. The results of the study overall indicate the high informativity of the used method. 相似文献
3.
Physical property anisotropy of foliated fault rocks: Study from the Nobeoka Thrust,Shimanto Belt,southwest Japan 下载免费PDF全文
下载免费PDF全文 Mari Hamahashi Wataru Tanikawa Yohei Hamada Yoshitaka Hashimoto Saneatsu Saito Gaku Kimura 《Island Arc》2018,27(5)
To investigate the physical property anisotropies of foliated fault rocks in subduction zones, the hanging wall phyllites and footwall cataclasites exhumed along the Nobeoka Thrust, a fossilized out‐of‐sequence‐thrust in the Shimanto Belt, Japan, was focused. Discrete physical property (electric resistivity, P‐ and S‐wave velocities, and porosity) measurements were conducted employing geologic coordinates (depth‐parallel direction, strike direction, and maximum dip direction of foliation), using the core samples obtained from the Nobeoka Thrust Drilling Project and compared the data to borehole geophysical logs. A higher sample P‐wave velocity (Vp), lower S‐wave velocity (Vs), higher Vp/Vs, and lower sample porosity and resistivity compared to the logs, are inferred to have been caused by the larger sampling scale of the logs and lower fluid saturation of the borehole. The phyllites and cataclasites exhibited substantial vertical and horizontal anisotropy of Vp (0.4–17.3 % and 2.7–13.8 %, respectively), Vs (0.5–56 % and 7.7–43 %, respectively), and resistivity (0.9–119 % and 2.0–65.9 %, respectively). The physical property anisotropies are primarily affected by the dip angles of foliation. The fault rocks that have gentler dip angles exhibit a higher Vp in the strike and maximum dip direction and a lower Vp in the depth‐parallel direction. In contrast, the fault rocks that have steeply dipping structures show a higher Vp in the strike and depth‐parallel directions with a lower velocity in the maximum dip direction. Resistivity anisotropy show a trend opposite to that of the Vp in relation to the dip angles. Our results show lower Vp anisotropy than those obtained in previous studies, which measured wave speeds perpendicular or parallel to foliation under confining pressure. This study highlights the significance of dip angles on vertical properties in geophysical surveys across foliated fault rocks. 相似文献
4.
Saeed Parvizi Riyaz Kharrat Mohammad R. Asef Bijan Jahangiry Abdolnabi Hashemi 《Acta Geophysica》2015,63(5):1231-1243
Shear and compressional wave velocities, coupled with other petrophysical data, are very important for hydrocarbon reservoir characterization. In situ shear wave velocity (Vs) is measured by some sonic logging tools. Shear velocity coupled with compressional velocity is vitally important in determining geomechanical parameters, identifying the lithology, mud weight design, hydraulic fracturing, geophysical studies such as VSP, etc. In this paper, a correlation between compressional and shear wave velocity is obtained for Gachsaran formation in Maroon oil field. Real data were used to examine the accuracy of the prediction equation. Moreover, the genetic algorithm was used to obtain the optimal value for constants of the suggested equation. Furthermore, artificial neural network was used to inspect the reliability of this method. These investigations verify the notion that the suggested equation could be considered as an efficient, fast, and cost-effective method for predicting Vs from Vp. 相似文献
5.
The InterPACIFIC project was aimed at assessing the reliability, resolution, and variability of geophysical methods in estimating the shear-wave velocity profile for seismic ground response analyses. Three different subsoil conditions, which can be broadly defined as soft-soil, stiff-soil, and hard-rock, were investigated. At each site, several participants performed and interpreted invasive measurements of shear wave velocity (Vs) and compression wave velocity (Vp) in the same boreholes. Additionally, participants in the project analysed a common surface-wave dataset using their preferred strategies for processing and inversion to obtain Vs profiles. The most significant difference between the invasive borehole methods and non-invasive surface wave methods is related to resolution of thin layers and abrupt contrasts, which is inherently better for invasive methods. However, similar variability is observed in the estimated invasive and non-invasive Vs profiles, underscoring the need to account for such uncertainty in site response studies. VS,30 estimates are comparable between invasive and non-invasive methods, confirming that the higher resolution provided by invasive methods is quite irrelevant for computing this parameter. 相似文献
6.
地震波在各向异性介质中以一个准P波(qP)和两个准S波(qS1和qS2)的形式传播.研究三种波的相速度、群速度以及偏振方向等传播性质能够为各向异性介质中的正反演问题提供有效支撑.具有比横向各向同性(TI)介质更一般对称性的正交各向异性介质通常需要9个独立参数对其进行描述,这使得对传播特征的计算更为复杂.当两个准S波速度相近时具有耦合性,从而令慢度的计算产生奇异性.因此,奇异点(慢度面的鞍点和交叉点)附近的反射与透射(R/T)系数的求解不稳定,会导致波场振幅不准确.本文首次通过结合耦合S波射线理论和基于迭代的各向异性相速度与偏振矢量的高阶近似解,得到了适用于正交各向异性介质以qP波入射所产生的二阶R/T系数的计算方法.与基于一阶近似的结果相比,基于二阶近似的方法提高了qP波R/T系数的精度,能得到一阶耦合近似无法表达的准确的qP-qS转换波的R/T系数解,且方法适用于较强的各向异性介质. 相似文献
7.
本文给出了对共振现象出现概率的理论分析与实验数据间关系的思考。样品取自位于半空间的硬化粗质冻土地基,包括石质冻层。参考从三个场地14次地震记录的纵、横波速求得的土层相对频率特征,进行了对其共振频率的评估。纵、横波速在前贝加尔和后贝加尔地区的粗质冻土层中随湿度和温度而变化。将这些概括化的速度值与一个共振频率和纵、横波度之间的关系式结合起来,用于评估被调查土层的纵、横波速的概率值。结果显示,通过综合在实验室尺度获得的速度值和现场测量获得的速度值的数据,则利用地震记录波来确定在松散土层内传播速度的概率值是可能的。 相似文献
8.
Tapendra Nath Maulik 《Pure and Applied Geophysics》1964,58(1):49-62
Summary It has been found that when seismic energy propagates along the surface of the homogeneous crust beside usual Rayleigh waves, it produces certain instability in layers through which it propagates. In the light of this instability, a type of motion corresponding to longitudinal wave will be prominent in horizontal component compared to the vertical component; while transverse wave will be prominent in the vertical component but weak in the horizontal component, a contradiction with the existing knowledge. This has been identified withP
F
phase. On taking the medium of propagation as slightly heterogeneous which allows existence of low velocity layer, a few larger number of such instabilities have been found. Velocity equation for Rayleigh waves for such media reveals existence of different velocities corresponding to vertical and horizontal components. Table for these velocities has been furnished. 相似文献
9.
10.
G. Zandt M. Leidig J. Chmielowski D. Baumont X. Yuan 《Pure and Applied Geophysics》2003,160(3-4):789-807
— The Altiplano-Puna Volcanic Complex (APVC) in the central Andes is the product of an ignimbrite “flare-up” of world class proportions (de Silva, 1989). The region has been the site of large-scale silicic magmatism since 10 Ma, producing 10 major eruptive calderas and edifices, some of which are multiple-eruption resurgent complexes as large as the Yellowstone or Long Valley caldera. Seven PASSCAL broadband seismic stations were operated in the Bolivian portion of the APVC from October 1996 to September 1997 and recorded teleseismic earthquakes and local intermediate-depth events in the subducting Nazca plate. Both teleseismic and local receiver functions were used to delineate the lateral extent of a regionally pervasive ～20-km-deep, very low-velocity layer (VLVL) associated with the APVC. Data from several stations that sample different parts of the northern APVC show large amplitude Ps phases from a low-velocity layer with Vs ≤ 1.0 km/s and a thickness of ～1 km. We believe the crustal VLVL is a regional sill-like magma body, named the Altiplano–Puna magma body (APMB), and is associated with the source region of the Altiplano–Puna Volcanic Complex ignimbrites (Chmielowski et al., 1999).¶Large-amplitude P–SH conversions in both the teleseismic and local data appear to originate from the top of the APMB. Using the programs of Levin and Park (1998), we computed synthetic receiver functions for several models of simple layered anisotropic media. Upper-crustal, tilted-axis anisotropy involving both Vp and Vs can generate a “split Ps” phase that, in addition to the Ps phase from the bottom of a thin isotropic VLVL, produces an interference waveform that varies with backazimuth. We have forward modeled such an interference pattern at one station with an anisotropy of 15%–20% that dips 45° within a 20-km-thick upper crust. We develop a hypothesis that the crust above the “magma body” is characterized by a strong, tilted-axis, hexagonally symmetric anisotropy. We speculate that the anisotropy is due to aligned, fluid-filled cracks induced by a “normal-faulting” extensional strain field associated with the high elevations of the Andean Puna. 相似文献
11.
Patrick N.J. Rasolofosaon 《Geophysical Prospecting》2010,58(4):637-655
Seismic anisotropy in geological media is now widely accepted. Parametrizations and explicit approximations for the velocities in such media, considered as purely elastic and moderately anisotropic, are now standards and have even been extended to arbitrary types of anisotropy. In the case of attenuating media, some authors have also recently published different parametrizations and velocity and attenuation approximations in viscoelastic anisotropic media of particular symmetry type (e.g., transversely isotropic or orthorhombic). This paper extends such work to media of arbitrary anisotropy type, that is to say to triclinic media. In the case of homogeneous waves and using the so‐called ‘correspondence principle’, it is shown that the viscoelastic equations (for the phase velocities, phase slownesses, moduli, wavenumbers, etc.) are formally identical to the corresponding purely elastic equations available in the literature provided that all the corresponding quantities are complex (except the unit vector in the propagation direction that remains real). In contrast to previous work, the new parametrization uses complex anisotropy parameters and constitutes a simple extension to viscoelastic media of previous work dealing with non‐attenuating elastic media of arbitrary anisotropy type. We make the link between these new complex anisotropy parameters and measurable parameters, as well as with previously published anisotropy parameters, demonstrating the usefulness of the new parametrization. We compute the explicit complete directional dependence of the exact and of the approximate (first and higher‐order perturbation) complex phase velocities of the three body waves (qP, qS1 and qS2). The exact equations are successfully compared with the ultrasonic phase velocities and phase attenuations of the three body waves measured in a strongly attenuating water‐saturated sample of Vosges sandstone exhibiting moderate velocity anisotropy but very strong attenuation anisotropy. The approximate formulas are checked on experimental data. Compared to the exact solutions, the errors observed on the first‐order approximate velocities are small (<1%) for qP‐waves and moderate (<10%) for qS‐waves. The corresponding errors on the quality factor Q are moderate (<6%) for qP‐waves but critically large (up to 160%) for the qS‐waves. The use of higher‐order approximations substantially improves the accuracy, for instance typical maximum relative errors do not exceed 0.06% on all the velocities and 0.6% on all the quality factors Q, for third‐order approximations. All the results obtained on other rock samples confirm the results obtained on this rock. The simplicity of the derivations and the generality of the results are striking and particularly convenient for practical applications. 相似文献
12.
Rayleigh wave dispersion can be induced in an anisotropic medium or a layered isotropic medium. For a layered azimuthally anisotropic structure, traditional wave equation of layered structure can be modified to describe the dispersion behavior of Rayleigh waves. Numerical stimulation results show that for layered azimuthal anisotropy both the dispersion velocities and anisotropic parameters depend principally on anisotropic S-wave velocities. The splitting S-wave velocities may produce dispersion splitting of Rayleigh waves. Such dispersion splitting appears noticeable at azimuthal angle 45°. This feature was confirmed by the measured results of a field test. The fundamental mode splits into two branches at azimuthal angle 45° to the symmetry axis for some frequencies, and along the same direction the difference of splitting-phase velocities of the fundamental model reaches the maximum. Dispersion splitting of Rayleigh waves was firstly displayed for anisotropy study in dispersion image by means of multichannel analysis of surface waves, the image of which provides a new window for studying the anisotropic property of media. 相似文献
13.
—Reflectivity synthetic seismograms demonstrate that the type, layering and orientation of 1-D anisotropy influences strongly the coda of teleseismic P waves at periods T > 1 sec, particularly P-SH converted waves. We assume the simplest form of anisotropy described by an elastic tensor with a symmetry axis ? of arbitrary orientation. The resulting phase velocities vary as cos 2ξ with respect to that axis. Using three families of simple crustal models, we compare the effects of an anisotropic surface layer with reverberations caused by both "thick" and "thin" layers of anisotropy at depth. If anisotropy in the surface layer is significant, the polarization of direct P can be distorted to generate a transverse component, followed by Ps and a prominent shear reverberation converted from direct P at the free surface. If the anisotropic layer is buried, the first, and often the most prominent, arrival on the transverse component is the P-to-SH conversion at its upper surface. If the anisotropic layer is sufficiently thin, P-to-SH conversions from its boundaries interfere to form a derivative pulse shape on the transverse component, which could be mistaken as the signature of shear-wave splitting. If ? is horizontal, compressional (P) and shear (S) anisotropy both produce similar waveform perturbations with four-lobed azimuthal patterns, suggesting that a weighted stack of P coda from different back-azimuths would improve signal-to-noise. For ? tilted between the horizontal and vertical, however, the effects of P- and S-anisotropy differ greatly. The influence of P-anisotropy on P-to-S conversion is greatest for a symmetry axis tilted at 45° to the vertical, where its azimuthal pattern has two lobes, rather than four. Combinations of P- and S-anisotropy typically lead to a composite azimuthal dependence in the P-coda reverberations. 相似文献
14.
E. Lüschen 《Pure and Applied Geophysics》1999,156(1-2):83-95
—Shear (S) waves differ from compressional (P) waves because of their lower propagation velocities, their lower frequencies and due to the different character of their particle motion. The move-out of travel-time branches of S-wave reflections is different from P waves owing to the difference in the propagation velocities. To distinguish between P and S waves requires broadband-frequency acquisition, long receiver arrays and three-component recording. S-wave generation at the source and P-to-S-wave conversion at crustal interfaces can be very efficient, implying that there is a real danger of misinterpreting signals if only vertical components are used. On the other hand, integrated P- and S-wave studies promise to provide very efficient lithological discriminators in the crystalline crust, in particular concerning the quartz content, and indicators for rock anisotropy, which can be interpreted for the existence of fine layering, the direction of the recent stress regime (alignments of micro-fractures) or for the direction of palaeo-stress (alignments of minerals). 相似文献
15.
F. F. Gorbatsevich V. R. Vetrin O. M. Trishina M. V. Kovalevsky 《Izvestiya Physics of the Solid Earth》2014,50(4):514-527
Based on the experimental and calculated data, the model of depth variations in density, as well as the velocities of longitudinal (P) and transverse (S) waves, within the upper, middle, and lower crusts of the Kola-Norwegian block down to a depth of about 40 km is suggested. The variations in density and the velocities of the P- and S-waves are primarily caused by the changes in the mineral composition of the rocks. The relative reduction in the velocities of the P- and S-waves under the action of the increasing pressure and temperature in the depth interval from 5 to 37 km is estimated at ～2%. 相似文献
16.
T. Bohlen W. Rabbel T. Weiss S. Siegesmund M. Pohl 《Pure and Applied Geophysics》1999,156(1-2):123-138
—Studies of seismic anisotropy in situ can help to discriminate between different rock types for the lower crust. In this context we investigate the sensitivity of an iterative linearized 3-D travel-time inversion scheme for transversely isotropic media with respect to two types of systematic errors wrong velocities and interface topography of the hanging wall of the lower crust. The computations simulate realistic field conditions such as found for the Variscan crust at the Urach geothermal anomaly. The study focusses on the possible information content of split S M ?S arrivals observed along two orthogonal expanding spread profiles. It ensues that an imperfect knowledge of the layer geometry is of minor importance compared to errors in the velocities of the hanging wall. In particular, upper crust anisotropy has to be considered carefully. Generally, the anisotropy of transversely polarized shear waves (SH waves) was recovered with higher accuracy than the anisotropy of vertically polarized shear waves (SV waves). 相似文献
17.
Munirdin Tohti Yibo Wang Evert Slob Yikang Zheng Xu Chang Yi Yao 《Geophysical Prospecting》2020,68(6):1927-1943
Seismoelectric coupling in an electric isotropic and elastic anisotropic medium is developed using a primary–secondary formulation. The anisotropy is of vertical transverse isotropic type and concerns only the poroelastic parameters. Based on our finite difference time domain algorithm, we solve the seismoelectric response to an explosive source. The seismic wavefields are computed as the primary field. The electric field is then obtained as a secondary field by solving the Poisson equation for the electric potential. To test our numerical algorithm, we compared our seismoelectric numerical results with analytical results obtained from Pride's equation. The comparison shows that the numerical solution gives a good approximation to the analytical solution. We then simulate the seismoelectric wavefields in different models. Simulated results show that four types of seismic waves are generated in anisotropic poroelastic medium. These are the fast and slow longitudinal waves and two separable transverse waves. All of these seismic waves generate coseismic electric fields in a homogenous anisotropic poroelastic medium. The tortuosity has an effect on the propagation of the slow longitudinal wave. The snapshot of the slow longitudinal wave has an oval shape when the tortuosity is anisotropic, whereas it has a circular shape when the tortuosity is isotropic. In terms of the Thomsen parameters, the radiation anisotropy of the fast longitudinal wave is more sensitive to the value of ε, while the radiation anisotropy of the transverse wave is more sensitive to the value of δ. 相似文献
18.
19.
地震各向异性介质的群速度是关于相角的复杂函数,将其表示成射线角形式较为困难,这给地震各向异性分析以及走时正演模拟等带来诸多不便;另一方面,观测资料表明实际地球介质的地震各向异性通常较弱,这为用射线角近似表示地震波群速度提供了可能.本文基于以射线角近似表示相角的思想,提出了一种弱各向异性条件下,群速度射线角近似表示的新方法.计算表明,在弱地震各向异性条件下,新方法在很宽的射线角范围内,对三种地震波的群速度都能很好地近似,在准SV波计算精度方面显著优于目前通常使用的近似方法. 相似文献
20.
深层-超深层油气地震勘探涉及高温介质地震波传播问题,热弹介质参数对地震波传播有重要影响.含弛豫时间修正项的Lord-Shulman双曲型耦合热弹波动方程从理论上预测了热弹性介质中存在快纵波、慢纵波(一种准静态慢纵波,简称热波)和横波的传播,两个纵波为热耗散衰减波而横波不受介质热特性的影响.本文结合平面波频散分析和格林函数法数值模拟,详细研究两个热耗散衰减波的频散和衰减特征,着重分析热导率、热膨胀系数及比热的变化对波速和衰减的影响.研究表明热导率作为主要参数决定了波速与衰减的临界变化,热膨胀系数对波速和衰减的幅度有明显影响,比热则兼顾了前两个热弹系数的影响特征.最后,利用热弹性动力学频率域的二阶格林函数进行波场快照数值模拟,展示热弹性介质中纵波、横波和热波的传播行为. 相似文献