首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 54 毫秒
1.
SARAL/AltiKa GDR-T are analyzed to assess the quality of the significant wave height (SWH) measurements. SARAL along-track SWH plots reveal cases of erroneous data, more or less isolated, not detected by the quality flags. The anomalies are often correlated with strong attenuation of the Ka-band backscatter coefficient, sensitive to clouds and rain. A quality test based on the 1 Hz standard deviation is proposed to detect such anomalies. From buoy comparison, it is shown that SARAL SWH is more accurate than Jason-2, particularly at low SWH, and globally does not require any correction. Results are better with open ocean than with coastal buoys. The scatter and the number of outliers are much larger for coastal buoys. SARAL is then compared with Jason-2 and Cryosat-2. The altimeter data are extracted from the global altimeter SWH Ifremer data base, including specific corrections to calibrate the various altimeters. The comparison confirms the high quality of SARAL SWH. The 1 Hz standard deviation is much less than for Jason-2 and Cryosat-2, particularly at low SWH. Furthermore, results show that the corrections applied to Jason-2 and to Cryosat-2, in the data base, are efficient, improving the global agreement between the three altimeters.  相似文献   

2.
The resolution of seamount geoid anomalies by the SARAL/AltiKa Ka-band radar altimeter is compared with the Envisat RA2 Ku-band altimeter using cross-spectral analysis of exact-repeat profiles. Noise spectra show white noise floors at root-mean-square levels around 8 mm per root-Hz for AltiKa and 19 mm per root-Hz for RA2, and are colored at wavelengths longer than a few km, with a spectral hump similar to that seen in Jason-2 data. The AltiKa noise level is lower than the RA2 noise level by more than one would expect from the ratio of their pulse repetition frequencies. Large outliers are present in data from both altimeters, always of one sign (range too long), and show little correlation with rain or other error flags. Seamount anomaly signal to noise ratios are 30 to 10 dB for AltiKa and 3 to 8 dB less for RA2, decreasing as seamount size decreases. Seamounts as small as 1.35 km tall are resolved by both instruments, with significantly better performance by AltiKa due to its lower noise level. If AltiKa can fly a geodetic mission, it will find many presently unknown seamounts.  相似文献   

3.
We present an initial assessment of SARAL/AltiKa data in the coastal band. The study focuses on the Ibiza Channel where the north-south water exchanges play a key role in controlling the circulation variability in the western Mediterranean. In this area, the track 16 of SARAL/AltiKa intercepts the domain covered by a coastal high-frequency (HF) radar system, which provides surface currents with a range up to 60 km. We evaluate the performance of the SARAL/AltiKa Ssalto/Duacs delayed-time along-track products compared to the HF radar surface velocity fields. SARAL/AltiKa data are retrieved at a distance of only 7 km from the coast, putting in evidence the emerging capabilities of the new altimeter. The derived velocities resolved the general features of the seasonal mesoscale variability with reasonable agreement with HF radar fields (significant correlations of 0.54). However, some discrepancies appear, which might be caused by instrumental hardware radar errors, ageostrophic velocities as well as inaccurate corrections and editing in the altimeter data. Root mean square (rms) differences between the estimated SARAL/AltiKa and the HF radar velocities are about 13 cm/s. These results are consistent with recent studies in other parts of the ocean applying similar approaches to Topex/Poseidon and Jason-1 missions and using coastal altimeter corrections.  相似文献   

4.
The current study aims to analyze the wind and wave parameters over Indian Ocean region obtained from first Ka –band altimeter AltiKa onboard SARAL, a collaborative mission of Indian Space Research Organization (ISRO) and Centre National d'Etudes Spatiales (CNES), France. It also demonstrates a real time application of SARAL data by assimilating the wave height in a wave model operational at the Space Applications Centre, ISRO. State-of–the art coastal wave model Simulating Wave Near shore (SWAN) is used for this purpose. The well-tested optimal interpolation technique is adopted for assimilation. Before proceeding to the assimilation per se, SARAL/AltiKa Wind and Significant Wave Height (SWH) have been validated using in- situ observations and WAVEWATCH III model. Apart from assessment of wind and wave data quality, this also served the purpose of providing error covariance to be used in assimilation. Supremacy of the assimilation run over parallel control run without assimilation has been judged by comparing the results with buoy observations at Indian National Centre for Ocean Information System (INCOIS). The statistics of validation of the assimilation run has been found to be extremely encouraging and interesting.  相似文献   

5.
On 25 February 2013, the SARAL satellite was launched from the Indian Sriharikota launch site. The key feature of the altimetric payload has been the selection of Ka-band. Using Ka-band avoids the need for a second frequency to correct for the ionosphere delay and eases the sharing of the antenna by the altimeter and the radiometer. The use of the Ka-band also allows the improvement of the range measurement accuracy in a ratio close to 2 due to the use of a wider bandwidth and to a better pulse to pulse echo decorrelation. Eventually, Ka-band antenna aperture is reduced, which limits the pollution within useful ground footprint. A summary of the results obtained during the in-flight assessment phase is given. All the tracking modes have also been gone through. Eventually, a new high data rate mode, called “HD mode” is implemented on AltiKa and has been used. The performance assessment is excellent: the range measurement accuracy is close to 1 cm for 1s averaging and the Significant Wave Height (SWH) noise is less than 5 cm (for a 2m SWH at 1?). The tracking success is close to 100% over oceans and 96% over all surfaces.  相似文献   

6.
This work presents the first calibration results for the SARAL/AltiKa altimetric mission using the Gavdos permanent calibration facilities. The results cover one year of altimetric observations from April 2013 to March 2014 and include 11 calibration values for the altimeter bias. The reference ascending orbit No. 571 of SARAL/AltiKa has been used for this altimeter assessment. This satellite pass is coming from south and nears Gavdos, where it finally passes through its west coastal tip, only 6 km off the main calibration location. The selected calibration regions in the south sea of Gavdos range from about 8 km to 20 km south off the point of closest approach. Several reference surfaces have been chosen for this altimeter evaluation based on gravimetric, but detailed regional geoid, as well as combination of it with other altimetric models.

Based on these observations and the gravimetric geoid model, the altimeter bias for the SARAL/AltiKa is determined as mean value of ?46mm ±10mm, and a median of ?42 mm ±10 mm, using GDR-T data at 40 Hz rate. A preliminary cross-over analysis of the sea surface heights at a location south of Gavdos showed that SARAL/AltiKa measure less than Jason-2 by 4.6 cm. These bias values are consistent with those provided by Corsica, Harvest, and Karavatti Cal/Val sites. The wet troposphere and the ionosphere delay values of satellite altimetric measurements are also compared against in-situ observations (?5 mm difference in wet troposphere and almost the same for the ionosphere) determined by a local array of permanent GNSS receivers, and meteorological sensors.  相似文献   

7.
The significant wave height (SWH) is one of the main parameters that describe wave characteristics and is widely used in wave research fields. Wave parameters measured by radar are influenced by the offshore distance and sea state. Validation and calibration are of great significance for radar data applications. The nadir beam of surface wave investigation and monitoring (SWIM) detects the global-ocean-surface SWH. To determine the product quality of SWIM SWH, this paper carried out time-space matching between SWIM and buoy data. The data qualities were evaluated under different offshore distances and sea states. An improved calibration method was proposed based on sea state segmentation, which considered the distribution of the point collocation numbers in various sea states. The results indicate that (1) the SWIM SWH accuracy at offshore distances greater than 50 km is higher than that at distances less than 50 km, with an root mean squared error (RMSE) of 0.244 4 m, scatter index (SI) of 0.115 6 and relative error (RE) of 9.97% at distances greater than 50 km and those of 0.446 0 m, 0.223 0 and 18.66% at distances less than 50 km. (2) SWIM SWH qualities are better in moderate and rough sea states with RMSEs of 0.284 8 m and 0.316 9 m but are worse in slight and very rough sea states. (3) The effect of the improved calibration method is superior to the traditional method in each sea state and overall data, and the RMSE of SWIM SWH is reduced from the raw 0.313 5 m to 0.285 9 m by the traditional method and 0.198 2 m by the improved method. The influence of spatiotemporal window selection on data quality evaluation was analyzed in this paper. This paper provides references for SWIM SWH product applications.  相似文献   

8.
A quantitative comparison of the collocated inter-annual significant wave height (SWH) data collected between 2006 and 2009 from buoys and altimeters at nine buoy locations (total n = 2241) in the Northern Indian Ocean is attempted for assessing the validity of daily averaged gridded altimeter significant wave height (ASWH) provided by AVISO for operational use. ASWH is underestimated by 0.20 m, the root-mean-square error (RMSE) is less than 0.30 m, the Scatter Index is less than 20%, and the correlation coefficient is greater than 0.90. Further, at three locations, the examination of the above statistics showed that the bias and RMSE is high during the southwest monsoon season compared with the Northeast monsoon. Scatter Index showed only slight variation (14–18%) for different ranges of SWH. The response of the daily average gridded ASWH data during extreme conditions (cyclones) in the vicinity of the buoy locations is poor at all compared buoy locations. The gridded ASWH from different satellite missions provided by AVISO can be used for basin scale validation experiments of the wave model and for climatological studies in the Indian Ocean, except during cyclone conditions.  相似文献   

9.
The strong increase in altimeter measurement errors near land surfaces is a limiting factor for coastal applications. We analyze the performance of the new Ka-band SARAL/AltiKa (SRL) mission in the northwestern Mediterranean Sea. SRL sea surface height (SSH) measurements are compared with those from the Jason-2 Ku-band satellite mission. The results show a significant increase in both quantity and quality of SSH data available near coastlines when using SRL data. Available edited data are 95.1% of SRL compared with 88.6% for Jason-2. Closer than 10 km to the coastline, available SRL data are still about 60% and only about 31% for Jason-2. Comparisons of the altimeter sea level variations are made with available coastal tide gauge data. The differences obtained between altimeter and tide gauge SLA time series are reduced for SRL (3.3 cm in average) compared with Jason-2 (4.2 cm in average), especially closer than 30 km to the land. It results in higher correlations (by 30%) obtained with SRL data. The coastal circulation derived from altimetry using SRL data shows an offshore meandering, which is more stable in time and with larger velocities close to the coast than that derived from Jason-2 observations.  相似文献   

10.
The focus of this study is the validation of significant wave height (SWH) and sea surface height anomaly (SSHA) obtained from the first Ka-band altimeter AltiKa onboard SARAL (Satellite for ARGOS and Altimeters). It is a collaborative mission of the Indian Space Research Organization and Centre National d'Etudes Spatiales (CNES). This is done using in-situ observations from buoy and Jason-2 measurements. Validation using buoy observations are at particular locations while that using Jason-2 altimeter is an attempt towards global validation of Altika products. The results clearly indicate that the SARAL/AltiKa provide high-quality data and the errors are within a predefined range of accuracy. A parallel validation of SWH from other altimeters, which monitored ocean since last decade, like EnviSAT and Jason-2 was also performed with buoy observations. The results clearly show that the accuracy of AltiKa SWH is much better than EnviSAT and comparable to reference mission Jason-2. The accuracy is quite good for the calm sea while in the rough seas the accuracy degrades some. The inter-comparison of SARAL/AltiKa SSHA with Jason-2 indicates a fair match between them. These validation exercises demonstrate the high quality of AltiKa products, usable for practical applications.  相似文献   

11.
The Kavaratti calibration-validation site in India at Lakshadweep Sea has been improved to carry out absolute calibration of SARAL/AltiKa altimeter. This site is augmented with a down-looking radar gauge and a permanent GPS receiver. The Kavaratti Island is located near a repeating ground track of SARAL/AltiKa and ～12 km away from the point of closest measurement of Jason-2, SARAL/AltiKa crossover point. Additionally, the altimeter and radiometer footprints do not experience any land contamination. This article aims at presenting the initial calibration-validation results over cycles 001-011 of AltiKa. The absolute sea surface height bias has been found to be ?48 mm at Kavaratti calibration site. In this preliminary study the effect of environmental variables such as winds and pressure are not considered in calculations.  相似文献   

12.
中国HY-2卫星雷达高度计有效波高真实性检验   总被引：9，自引：5，他引：4  
Chinese Haiyang-2(HY-2) satellite is the first Chinese marine dynamic environment satellite. The dual-frequency(Ku and C band) radar altimeter onboard HY-2 has been working effective to provide operational significant wave height(SWH) for more than three years(October 1, 2011 to present).We validated along-track Ku-band SWH data of HY-2 satellite against National Data Buoy Center(NDBC) in-situ measurements over a time period of three years from October 1, 2011 to September 30, 2014, the root mean square error(RMSE) and mean bias of HY-2SWH is 0.38 m and(–0.13±0.35) m, respectively. We also did cross validation against Jason-2 altimeter SWH data,the RMSE and the mean bias is 0.36 m and(–0.22±0.28) m, respectively. In order to compare the statistical results between HY-2 and Jason-2 satellite SWH data, we validated the Jason-2 satellite radar altimeter along-track Ku-band SWH data against NDBC measurements using the same method. The results demonstrate the validation method in this study is scientific and the RMSE and mean bias of Jason-2 SWH data is 0.26 m and(0.00±0.26) m,respectively. We also validated both HY-2 and Jason-2 SWH data every month, the mean bias of Jason-2 SWH data almost equaled to zero all the time, while the mean bias of HY-2 SWH data was no less than –0.31 m before April2013 and dropped to zero after that time. These results indicate that the statistical results for HY-2 altimeter SWH are reliable and HY-2 altimeter along-track SWH data were steady and of high quality in the last three years. The results also indicate that HY-2 SWH data have greatly been improved and have the same accuracy with Jason-2SWH data after April, 2013. SWH data provided by HY-2 satellite radar altimeter are useful and acceptable for ocean operational applications.  相似文献   

13.
On 25 February 2013, the Satellite for Argos and AltiKa (SARAL) was launched from the Indian Sriharikota launch site. The AltiKa payload consisted of an altimeter and a radiometer. This paper describes the AltiKa radiometer. This instrument has been studied for several years by CNES, TAS-F, ASTRIUM-F and a set of science laboratories, and AltiKa is the first compact instrument embedding simultaneously the altimeter and radiometer functions. AltiKa radiometer is a dual frequency instrument working in K (23.8 GHz) and Ka band (37 GHz), it is based on the total power principle, with direct detection receivers. On-ground acceptance tests exhibited a very high level of performance: less than 0.2 dB has been estimated for both sensitivity and absolute accuracy in both frequencies. This paper focuses on the in-flight performances that have been observed since the launch. All the instrument observable characterizations are nominal, and in-flight sensitivity has been estimated lower than 0.2 K.  相似文献   

14.
The accuracy of the marine gravity field derived from satellite altimetry depends on dense track spacing as well as high range precision. Here, we investigate the range precision that can be achieved using a new shorter wavelength Ka-band altimeter AltiKa aboard the SARAL spacecraft. We agree with a previous study that found that the range precision given in the SARAL/AltiKa Geophysical Data Records is more precise than that of Ku-band altimeter by a factor of two. Moreover, we show that two-pass retracking can further improve the range precision by a factor of 1.7 with respect to the 40 Hz-retracked data (item of range_40 hz) provided in the Geophysical Data Records. The important conclusion is that a dedicated Ka-band altimeter-mapping mission could substantially improve the global accuracy of the marine gravity field with complete coverage and a track spacing of <6 km achievable in ～1.3 years. This would reveal thousands of uncharted seamounts on the ocean floor as well as important tectonic features such as microplates and abyssal hill fabric.  相似文献   

15.
In the absence of many gauging stations in the major and mighty river systems, there is a need for satellite-based observations to estimate temporal variations in the river water storage and associated water management. In this study, SARAL/AltiKa application for setting up hydraulic model (HEC-RAS) and river flow simulations over Tapi River India has been discussed. Waveform data of 40 Hz from Ka band altimeter has been used for water levels retrieval in the Tapi river. SARAL/AltiKa retrieved water levels were converted to discharge in the upstream location (track-926) using the rating curve available for the nearby gauging site and using linear spatial interpolation technique. Steady state simulations were done for various flow conditions in the upstream. Validation of river flow model was done in the downstream location (track-367) by comparing simulated and altimeter retrieved water levels (RMSE 0.67 m). Validated model was used to develop rating curve between water levels and simulated discharge for the downstream location which enables to monitor discharge variations from satellite platform in the absence of in situ observations. It has been demonstrated that SARAL/AltiKa data has potential for river flow monitoring and modeling which will feed for flood disaster forecasting, management and planning.  相似文献   

16.
HY-2 has been launched by China on August 16, 2011 which assembles multi-microwave remote sensing payloads in a body and has the ability of monitoring ocean dynamic environments. The HY-2 satellite data need to be calibrated and validated before being put into use. Based on the in-situ buoys from the Nation- al Data Buoy Center （NDBC）, Ku-band significant wave heights （SWH, hs） of HY-2 altimeter are validated. Eleven months of HY-2 altimeter Level 2 products data are chose from October 1, 2011 to August 29, 2012. Using NDBC 60 buoys yield 902 collocations for HY-2 by adopting collocation criteria of 30 min for tempo- ral window and 50 km for a spatial window. An overall RMS difference of the SWH between HY-2 and buoy data is 0.297 m. A correlation coefficient between these is 0.964. An ordinary least squares （OLS） regression is performed with the buoy data as an independent variable and the altimeter data as a dependent vari- able. The regression equation of hs is hs （HY-2）=0.891 × hs （NDBC）＋0.022. In addition, 2016 collocations are matched with temporal window of 30 rain at the crossing points of HY-2 and Jason-2 orbits. RMS difference of Ku-band SWH between the two data sets is 0.452 m.  相似文献   

17.
基于浮标数据的卫星雷达高度计海浪波高数据评价与校正   总被引：1，自引：1，他引：0  
卫星雷达高度计是海浪有效波高（significant wave height,SWH）观测的重要手段之一,本文利用时空匹配方法对T/P、Jason-1、Envisat、Jason-2、Cryosat-2和HY-2A共6颗卫星雷达高度计SWH数据与NDBC（National Data Buoy Center,NDBC）浮标SWH数据进行对比验证,并对雷达高度计SWH数据进行校正。全部卫星雷达高度计SWH数据时间跨度为1992年9月25日到2015年9月1日,对比验证NDBC浮标共53个,包括7个大洋浮标。精度评价发现除T/P外,各卫星雷达高度计SWH的RMSE都在0.4~0.5 m之间,经过校正后,RMSE都有显著下降,下降程度最大为13.82%;对于大洋浮标,评价结果RMSE在0.20~0.28 m之间,结果明显优于全部NDBC浮标的精度评价结果;HY-2A卫星雷达高度计SWH在经过校正后数据质量与国外其他5颗卫星雷达高度计SWH数据质量差异较小。  相似文献   

18.
HY-2A卫星高度计有效波高信息提取业务化算法   总被引：1，自引：0，他引：1  
2011年8月16日我国成功发射了第一颗自主海洋动力环境卫星HY-2A,有效波高是其搭载的雷达高度计可获取的重要海洋动力环境参数之一。本文详细介绍了应用于HY-2A雷达高度计的有效波高信息提取业务化算法,该算法通过迭代最小二乘拟合方法提取有效波高信息。同时,基于HY-2A雷达高度计业务化运行获取的有效波高数据,分别与Jason-2卫星高度计有效波高和NDBC浮标海浪波高数据进行了比对分析。比较结果表明,HY-2A雷达高度计与Jason-2有效波高的标准偏差为-0.26m,RMS为0.58m;HY-2A高度计与NDBC浮标数据间的标准偏差为-0.22m,RMS为0.37m。结果证明了目前应用于HY-2A雷达高度计业务化运行中的有效波高信息提取算法的可行性。  相似文献   

19.
The SARAL/AltiKa project is based on a single Ka band altimeter (35.75 GHz), which is the first oceanography altimeter to operate at such a high frequency. Ka band offers reduced radar footprint in comparison to traditional Ku band altimeters and negligible ionospheric effects. In this paper we present and evaluate benefits of AltiKa altimeter applied in the study of lakes in Andean chain in South America. Water levels time series obtained with Envisat/RA-2 and SARAL/AltiKa altimeters over 17 lakes of various sizes are calculated and compared to in situ observations. SARAL/AltiKa measurements tend to be extremely well correlated with in situ measurements and offer significant improvements compared to the Envisat mission.  相似文献   

20.
Sea ice leads play an essential role in ocean-ice-atmosphere exchange, in ocean circulation, geochemistry, and in ice dynamics. Their precise detection is crucial for altimetric estimations of sea ice thickness and volume. This study evaluates the performance of the SARAL/AltiKa (Satellite with ARgos and ALtiKa) altimeter to detect leads and to monitor their spatio-temporal dynamics. We show that a pulse peakiness parameter (PP) used to detect leads by Envisat RA-2 and ERS-1,-2 altimeters is not suitable because of saturation of AltiKa return echoes over the leads. The signal saturation results in loss of 6–10% of PP data over sea ice. We propose a different parameter—maximal power of waveform—and define the threshold to discriminate the leads. Our algorithm can be applied from December until May. It detects well the leads of small and medium size from 200 m to 3–4 km. So the combination of the high-resolution altimetric estimates with low-resolution thermal infra-red or radiometric lead fraction products could enhance the capability of remote sensing to monitor sea ice fracturing.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号