共查询到20条相似文献，搜索用时 34 毫秒
1.
《Marine and Petroleum Geology》2003,20(6-8):563-586
With abundant well penetrations in proximal and distal settings and 3D seismic coverage, the Auger Basin is an ideal location to study the influence of basin setting and accommodation on the stratigraphic architecture of ancient turbidite systems. Pliocene-age turbidites at Macaroni Field were deposited in ponded accommodation in the distal portion of a salt-bounded intraslope basin, immediately inboard of a sediment spill point to the linked outboard basin. Deposits at Auger Field are contained within point-sourced submarine fans deposited in healed slope accommodation in the more proximal portion of the basin on the flank of a paleo-bathymetric ridge, immediately down depositional dip of a sediment spill point from an inboard basin. Both areas of the basin are distinct in terms of sediment dispersal patterns, rate of sediment fill, and preservation potential of reservoir/seal pairs, and while both fields contain sand-rich deposits and record vertical evolution from older sheet dominated- to younger channel dominated deposits over the Late Pliocene section, there are key differences in the nature in which the fill occurs. The ponded stratigraphic section at Macaroni Field records (1) an early mud-rich phase in which incoming flows are completely captured by confining topography, (2) a brief phase of diminished relief when high frequency fill/spill cycles occur, and ultimately (3) a phase of incision of the former basin sill and large-scale bypass to the outboard basin. Over the same period, the healed-slope section at Auger Field records a fill pattern consisting of alternating episodes of initial sand-rich sheet/lobe deposition followed by intervals of channelization. We acknowledge extra-basinal controls (eustacy, climate) on the timing, rate, and nature of sediment supply to the basin, but there is considerable evidence for paleo-bathymetric control on cyclical fill patterns observed at fourth and higher-order scales. 相似文献
2.
This study focuses on the interpretation of stratigraphic sequences through the integration of biostratigraphic, well log and 3D seismic data. Sequence analysis is used to identify significant surfaces, systems tracts, and sequences for the Miocene succession.The depositional systems in this area are dominantly represented by submarine fans deposited on the slope and the basin floor. The main depositional elements that characterize these depositional settings are channel systems (channel-fills, channel-levee systems), frontal splays, frontal splay complexes, lobes of debrites and mass-transport complexes.Five genetic sequences were identified and eleven stratigraphic surfaces interpreted and correlated through the study area. The Oligocene-lower Miocene, lower Miocene and middle Miocene sequences were deposited in bathyal water depths, whereas the upper Miocene sequences (Tortonian and Messinian) were deposited in bathyal and outer neritic water depths. The bulk of the Miocene succession, from the older to younger deposits consists of mass-transport deposits (Oligocene-lower Miocene); mass transport deposits and turbidite deposits (lower Miocene); debrite deposits and turbidite deposits (middle Miocene); and debrite deposits, turbidite deposits and pelagic and hemipelagic sediments (upper Miocene). Cycles of sedimentation are delineated by regionally extensive maximum flooding surfaces within condensed sections of hemipelagic mudstone which represent starved basin floors. These condensed sections are markers for regional correlation, and the maximum flooding surfaces, which they include, are the key surfaces for the construction of the Miocene stratigraphic framework. The falling-stage system tract forms the bulk of the Miocene sequences. Individual sequence geometry and thickness were controlled largely by salt evacuation and large-scale sedimentation patterns. For the upper Miocene, the older sequence (Tortonian) includes sandy deposits, whereas the overlying younger sequence (Messinian) includes sandy facies at the base and muddy facies at the top; this trend reflects the change from slope to shelf settings. 相似文献
3.
《Marine and Petroleum Geology》2003,20(6-8):733-755
The marine fill of ancient foreland basins is primarily recorded by depositional systems consisting of facies and facies associations deposited by a variety of sediment gravity flows in shallow-marine, slope and basinal settings. Tectonism and climate were apparently the main factors controlling the sediment supply, accommodation and depositional style of these systems. In marginal deltaic systems, sedimentation is dominated by flood-generated hyperpycnal flows that build up impressive accumulations of graded sandstone beds in front of relatively small high-gradient fan-deltas and river deltas. During periods of tectonically forced lowstands of sealevel, these systems may commonly shift basinward to shelfal and slope regions. Instability along the edges of these lowstand deltas and sand-laden hyperpycnal flows generate immature and coarse-grained turbidite systems commonly confined within structural depressions and generally encased in distal delta-front and prodeltaic deposits. Because of the close vertical and lateral stratigraphic relations between deltaic and turbidite-like facies, these marginal systems are herein termed ‘mixed depositional systems’. They are very common in the fill of foreland basins and represent the natural link between deltaic and basinal turbidite sedimentation.Basinal turbidite systems form in deeper water elongate highly subsiding troughs (foredeeps) that developed in front of advancing thrust systems. The impressive volumes of sheet-sandstones that form the fill of these troughs suggest that basinal turbidite systems are likely to form following periods of dramatic tectonic uplift of adjacent orogenic wedges and related high-amplitude tectonically-forced sealevel lowstands. In such deep basinal settings, sediment flux to the sea is dramatically increased by newly formed sediment in fluvial drainage basins and the subaerial and submarine erosion of falling-sealevel deltaic deposits generated during the uplift. Turbidity currents are very likely to be mainly triggered by floods, via hyperpycnal flows and related sediment failures, but can fully develop only in large-scale erosional conduits after a phase of catastrophic acceleration and ensuing bulking produced by bed erosion. This process leads to deepening and widening of the conduits and the formation of large-volume highly efficient bipartite currents whose energy dissipation is substantially reduced by the narrow and elongate basin geometry. These currents can thus carry their sediment load over considerable distances down the basin axis. 相似文献
4.
This study integrates newly acquired stratigraphic data, geologic mapping, and paleocurrent data to constrain the stratigraphic evolution of the oldest channel-lobe complex in the Upper Cretaceous Cerro Toro Formation in the Silla Syncline area of the Magallanes Basin, termed the Pehoe member. The Pehoe member ranges in thickness from 60 m in the north to at least 410 m farther down system and comprises three separate divisions (A, B, and C). A lower conglomerate unit and an upper one, termed Pehoe A and C divisions respectively, represent the fill of major incised submarine channels or channel complexes. These are separated by stratified sandstone of the Pehoe B division, representing a weakly confined lobe complex, either transient or terminal.The integration of new data with observations from previous studies reveal that the three main coarse-grained conglomerate and sandstone members in the Cerro Toro Formation in the Silla Syncline include at least seven distinct submarine channels or channel complexes and two major lobe complexes. The thinning and disappearance of these units along the eastern limb of the syncline reflect confinement of the flows to a narrow trough or mini-basin bounded to the east by a topographic high. This confinement resulted in unidirectional paleocurrents to the south and southeast in all deposits. Changes in depositional geometries are interpreted as reflecting changes in sediment supply and relative confinement. Submarine channels were from 700 m to 3.5 km wide and occupied a fairway that was 4-5 km wide. Flows moving south and southeast in this mini-basin probably crossed the eastern topographic high south of the present exposures and joined those moving southward along the axis of the foreland basin at least 16 km to the east. 相似文献
5.
The deep lacustrine gravity-flow deposits are widely developed in the lower Triassic Yanchang Formation, southeast Ordos Basin, central China. Three lithofacies include massive fine-grained sandstone, banded sandstone, and massive oil shale and mudstone. The massive fine-grained sandstones have sharp upper contacts, mud clasts, boxed-shaped Gamma Ray (GR) log, but no grading and Bouma sequences. In contrast, the banded sandstones display different bedding characteristics, gradational upper contacts, and fine-upward. The massive, fine-grained sandstones recognized in this study are sandy debrites deposited by sandy debris flows, while the banded sandstones are turbidites deposited by turbidity currents not bottom currents. The sediment source for these deep gravity-flow sediments is a sand-rich delta system prograding at the basin margin. Fabric of the debrites in the sandy debris fields indicates initial formation from slope failure caused by the tectonic movement. As the sandy debris flows became diluted by water and clay, they became turbidity currents. The deep lacustrine depositional model is different from the traditional marine fan or turbidite fan models. There are no channels or wide lobate sand bodies. In the lower Triassic Yanchang Formation, layers within the sandy debrites have higher porosity (8–14%) and permeability (0.1–4 mD) than the turbidites with lower porosity (3–8%) and permeability (0.04–1 mD). Consequently, only the sandy debrites constitute potential petroleum reservoir intervals. Results of this study may serve as a model for hydrocarbon exploration and production for deep-lacustrine reservoirs from gravity-flow systems in similar lacustrine depositional environments. 相似文献
6.
《Marine and Petroleum Geology》2003,20(6-8):789-807
The lower part of the Carboniferous Shannon Basin of Western Ireland contains a deep-water succession which exceeds 1200 m in thickness that comprises five lithologically different units deposited within a confined, relatively narrow basin: (i) a calciclastic debris-flow and turbidite unit formed by resedimentation from nearby carbonate platforms, (ii) a siliciclastic black shale succession with former source potential which onlaps basin margins (Clare Shales), (iii) a sandstone-dominated turbidite formation, controlled by ponded accommodation and deposited axially in the basin (Ross Formation), (iv) a mudstone-rich turbidite-bearing succession, which onlaps basin margins (lower Gull Island Formation), and (v) a mudstone-dominated prograding slope succession (upper Gull Island Formation and lower Tullig Cyclothem), which grades transitionally upwards into deltaic deposits. The top unit records progradation at a time when basin differential subsidence had diminished significantly and local basin topography did not control deposition. The two upper mudstone-dominated units are different in terms of both sandstone content and their genetic significance within the overall basin-fill, and their potential relevance as reservoir analogues.The lower part of the Gull Island Formation contains three principal facies associations: (a) shallow turbidite channels and sheets representing channel margin and levee deposits, (b) mud-rich slumps, and (c) less than 1 m thick, rare, hemipelagic shales. More than 75% is deformed by soft-sediment deformation, but only to a smaller degree affecting sandstone units. The turbidites record transport to the ENE, along the axis of the basin, while the slumps were derived from an unstable northern slope and transported transversely into the basin towards the southeast. The distribution of turbidite sandstone and slumps is inversely proportional. Sandstones decrease in importance away from the basin axis as slumps increase in number and thickness. The lower part of the Gull Island Formation is interpreted to record progressive fill of a deep basin controlled by local, healed slope accommodation with onlap/sidelap of the basin margins. The instability resulted from a combination of fault-controlled differential subsidence between basin margin and basin axis, and high rates of sedimentation.The upper part of the Gull Island Formation is entirely dominated by mudstones, which grade upwards into siltstones. It contains rare, up to 15 m thick, isolated channels filled by turbidites, showing transport towards the east. The upper part records easterly progradation of a deep-water slope genetically tied to overlying deltaic deposits, and controlled by regional accommodation.The contrasts between the lower and upper parts of the Gull Island Formation show that onlapping/sidelapping turbidite successions have reservoir potential near basin axes, but that prograding deep-water slopes are less likely to have reservoir potential of significance. A suggested regional downlap surface between the two parts is a significant break and marker in terms of reservoir potential. 相似文献
7.
The Middle–Late Miocene Utsira Formation of the North Sea Basin contains a fully preserved, regional marine sand deposit that records a stable paleogeographic setting of sand transport and accumulation within a deep, epeiric seaway which persisted for >8 Ma. The sediment dispersal system was defined by (1) input through a marginal prograding strandplain platform, coast-to-basin bypass, transport along a narrow strait, and accumulation in strait-mouth shoal complexes within a shelf sea; (2) a high-energy marine regime; (3) very low time-averaged rates of sediment supply and accumulation; and (4) consequent high sediment reworking ratio. Sand distribution and stratal architectures reflect regional along-strike sediment transport and local to sub-regional landward sediment transport. Plume-shaped, south-building, submarine sand shoals that formed along the recurved arc of the strandplain margin nourished the shoal system. Very low-angle sigmoid clinoforms and down-stepping, aggradational top sets are distinctive architectures of these strike-fed sand bodies. The combination of strong marine currents and slow but long-lived sand supply from the Shetland strandplain created regional, sandy shelf shoal depositional systems that individually covered 3,500 to 6,000 km2 of the basin floor. Defining attributes of the shelf shoal systems include their location within the basin axis, abundance of autochthonous sediment, and sandy marine facies composition. Diagnostic depositional architectures include the along-strike-dipping sigmoidal clinoforms, poly-directional low-angle accretionary bedding at both regional and local scales, and mounded depositional topography. Erosional features include regional hummocky, low-relief shelf deflation surfaces, broad, elongate scours and sub-circular scour pits. 相似文献
8.
Subsurface mass-transport deposits (MTDs) commonly have a chaotic seismic-reflection response. Synthetic seismic-reflection profiles, created from a precise lithological model, are used to interpret reflection character and depositional geometries at multiple frequencies. The lithological model was created from an outcrop of deep-water lithofacies where sandstone deposition was influenced by mass-transport deposit topography. The influence of MTD topography on sandstone distribution should be considered in reservoir characterization and modeling when MTDs underlie the reservoir, especially if the reservoir is thin relative to the scale of the topography. MTD topography up to several tens of meters in both the horizontal and vertical dimensions (relative to local elevation) compartmentalizes significant quantities of sandstone and is not resolved at lower seismic-reflection frequencies. The resolvability of thick (up to 70 m) sandstone packages is hindered when they are encased in MTDs of at least equivalent thickness. Lateral and vertical changes in seismic-reflection character (e.g., amplitude, polarity, geometry) of sandstone packages in the synthetic profiles are due to lithology changes, tuning effects, resolution limits, and depositional geometries, which are corroborated by the lithological model. Similar reflection-character changes are observed in an actual seismic-reflection profile, of comparable scale to the synthetic profiles, from the Gulf of Mexico, which demonstrates similar lithofacies distributions. Synthetic profiles, when constrained by a precise lithological model, are particularly useful analogues for interpretation of lithofacies relationships, and depositional geometries, in complicated depositional environments, such as deep-water slope deposits. 相似文献
9.
This paper re-examines the Upper Miocene Upper Mount Messenger Formation, Taranaki Basin, to characterize its architecture and interpret its environmental evolution. Analysis of stratal architecture, lithofacies distributions, and paleotransport directions over the 250 m thick formation shows the outcrops provide a nearly dip parallel section displaying the lateral relationships between contemporaneous channel-levee and overbank depositional environments. At least five 30–40 m thick upward fining units are recognized in the north-central parts of the outcrop and are interpreted as large-scale overbank avulsion cycles. Each unit consists of thick- to medium-bedded predominantly planar laminated sandstone turbidites at the base that fine upward into thin- to very thin-bedded, planar laminated and ripple cross-laminated mud-rich turbidites. The units are traceable laterally over a distance exceeding 3 km where they are cut by channels that show basal mudstone draped by medium- to thin-bedded sandstone, and onlapped by thick-bedded planar laminated sandstone at the margin. The channels are separated by tapered packages of medium- to thin-bedded turbidites containing climbing-ripple cross-lamination interpreted as levees. The individual channel-levee and overbank avulsion cycles formed through four stages: 1) a channel avulsion spread sand into the overbank as an unconfined splay, 2) preferential scouring in one area of the splay led to development of a channel with small levees that prograded across the splay, 3) a deep incision followed by abandonment of the channel deposited a mud lining. Alternatively, the mud lining was formed during the first stage as the downdip portion of the channel was abandoned. 4) The channel filled at first by thick-bedded planar laminated and then by climbing-ripple cross-laminated sand. At this time, the growth of constructional levees progressively limited sand into the overbank. Ratios of Bouma division thicknesses calculated over a stratigraphic interval present a new method to distinguish deep-water depositional environments. 相似文献
10.
S.S. Flint D.M. HodgsonA.R. Sprague R.L. BruntW.C. Van der Merwe J. FigueiredoA. Prélat D. BoxC. Di Celma J.P. Kavanagh 《Marine and Petroleum Geology》2011,28(3):658-674
The Laingsburg depocentre of the SW Karoo Basin, South Africa preserves a well-exposed 1200 m thick succession of upper Permian strata that record the early filling of a basin during an icehouse climate. Uniformly fine-grained sandstones were derived from far-field granitic sources, possibly in Patagonia, although the coeval staging and delivery systems are not preserved. Early condensed shallow marine deposits are overlain by distal basin plain siltstone-prone turbidites and volcanic ashes. An order of magnitude increase in siliciclastic input to the basin plain is represented by up to 270 m of siltstone with thin sandstone turbidites (Vischkuil Formation). The upper Vischkuil Formation comprises three depositional sequences, each bounded by a regionally developed zone of soft sediment deformation and associated 20-45 m thick debrite that represent the initiation of a major sand delivery system. The overlying 300 m thick sandy basin-floor fan system (Unit A) is divisible into three composite sequences arranged in a progradational-aggradational-retrogradational stacking pattern, followed by up to 40 m of basin-wide hemipelagic claystone. This claystone contains Interfan A/B, a distributive lobe system that lies 10 m beneath Unit B, a sandstone-dominated succession that averages 150 m thickness and is interpreted to represent a toe of slope channelized lobe system. Unit B and the A/B interfan together comprise 4 depositional sequences in a composite sequence with an overall basinward-stepping stacking pattern, overlain by 30 m of hemipelagic claystone. The overlying 400 m thick submarine slope succession (Fort Brown Formation) is characterized by 10-120 m thick sand-prone to heterolithic packages separated by 30-70 m thick claystone units. On the largest scale the slope stratigraphy is defined by two major cycles interpreted as composite sequence sets. The lower cycle comprises lithostratigraphic Units B/C, C and D while the upper cycle includes lithostratigraphic Units D/E, E and F. In each case a sandy basal composite sequence is represented by an intraslope lobe (Units B/C and D/E respectively). The second composite sequence in each cycle (Units C and E respectively) is characterized by slope channel-levee systems with distributive lobes 20-30 km down dip. The uppermost composite sequence in each cycle (Units D and F respectively) are characterised by deeply entrenched slope valley systems. Most composite sequences comprise three sequences separated by thin (<5 m thick) claystones. Architectural style is similar at individual sequence scale for comparable positions within each composite sequence set and each composite sequence. The main control on stratigraphic development is interpreted as late icehouse glacio-eustasy but along-strike changes associated with changing shelf edge delivery systems and variable bathymetry due to differential substrate compaction complicate the resultant stratigraphy. 相似文献
11.
The sedimentology and sequence stratigraphy of the central Apennine lower Miocene carbonate deposits (Guadagnolo Formation) are the goal of this paper. The Guadagnolo carbonate ramp deposits consist of a thick succession of three main lithofacies: marls, marly limestones and cross-bedded limestones. The lateral and vertical facies distribution, as well as the biota assemblages, suggests a deposition of these sediments along the middle-outer ramp sector of the Latium-Abruzzi carbonate platform. All the data suggest sedimentation under the influence of tidal currents that were responsible of bedforms generation as simple and compound dunes. These bodies are developed on metric and decametric scale, and are stacked one to other to form complex sedimentary bodies extending both in strike and dip section for several tens to hundred meters. The dune system developed in a semiclosed basin (the Paleoadriatic sea), open in the southern and closed in the northern sector respectively. Within this basin a probably amphidromic system developed. The flow sediment transport was dominantly westward, and was conditioned by the ramp paleotopography. From a sequence stratigraphic point of view several high and low rank depositional sequences that were differentiated basing on their relative physical scale (thickness of each unit) and on the lateral extension of the unconformities and the correlative conformities bounding them were recognized. The hierarchy of recognized sequence-stratigraphic units include, from the smallest to the largest: simple depositional sequences, low-rank composite depositional sequences and high-rank composite depositional sequences. In the Guadagnolo succession four high-rank composite depositional sequences having a duration variable from 0.9 to 1.6 Ma, and named Guadagnolo 1, 2, 3, and 4, were recognized. These high-rank composite sequences are internally constituted by a stacking of simple and low-rank composite depositional sequences, having a duration ranging from 40 ka to 200 ka. All these units constitute part of a higher-rank composite sequence developing between 21 and 14.80 Ma that we name “The Guadagnolo Depositional Sequence”. The wedge-shaped geometry, the thickness variation and the stacking pattern of the Guadagnolo succession are the response to eustasy and tectonic subsidence. The glacial eustasy mostly controlled the formation of the high-frequency depositional sequences, tectonic subsidence, related to the roll-back of the hinge west-directed subduction in turn connected to the advancement of the Apennine thrust modulated the accommodation space. 相似文献
12.
13.
In a broader application of sequence stratigraphic concept to a tectonically active margin setting, this study presents a sequence model that considers all three controls on sequence development (i.e. eustasy, tectonic movement and sediment supply) as independent variables. The model introduces six sequence types (A to F) including type 1 and type 2 sequences defined in the original Exxon scheme. Each sequence shows a variety in number and stacking pattern of its constituent parasequence sets reflecting combined effects of accommodation change and sediment supply. This model is applied to a seismic sequence analysis of the shelf–slope system (middle to upper Miocene) in the southwestern margin of Ulleung Basin which has experienced significant crustal deformation during the Tertiary back-arc opening and subsequent closing of the East Sea (Sea of Japan). The model application delineates four sequence types whose development is closely associated with the tectonic evolution of the Ulleung Basin margin. During the back-arc opening (early to middle Miocene), type A and B sequences were emplaced as a result of steady creation of accommodation space due to a rapid subsidence combined with a tectonic-controlled high to moderate rate of sediment supply. The sequences associated with the extensional tectonism are characterized by active progradation and aggradation without forced regressive phases. In the initiation stage of back-arc closure (middle to late Miocene), subsidence rates were significantly reduced because of a widespread contractional deformation, while subaerial erosion of the uplifted thrust belt resulted in an increase in sedimentation rate. As a result, steady prograding type-E sequences were formed by alternating normal and forced regressions. During the quiescent phase of back-arc closure in the late Miocene, rise-dominant fluctuating relative sea-level change and moderate to low sediment supply gave rise to type-F sequences (similar to type-1 sequences of the Exxon group) reflecting a major control of eustatic sea-level change. 相似文献
14.
Franco Ricci Lucchi Albina Colella Gianni Gabbianelli Sergio Rossi William R. Normark 《Geo-Marine Letters》1984,3(2-4):71-77
The Crati Fan is located in the tectonically active submerged extension of the Apennines chain and foretrough. The small fan
system is growing in a relatively shallow (200 to 450 m), elongate nearshore basin receiving abundant input from the Crati
River. The fan is characterized by a short, steep, channelized section (inner or upper fan) and a smooth, slightly bulging
distal section (outer or lower fan). The numerous subparallel channels head in the shelf or littoral zone and do not form
branching distributary patterns. Sand and mud depositional lobes of the outer fan stretch over more than 60% of fan length.
Margin setting represents fan and/or source area 相似文献
15.
The Wollaston Forland Basin, NE Greenland, is a half-graben with a Middle Jurassic to Lower Cretaceous basin-fill. In this outcrop study we investigate the facies, architectural elements, depositional environments and sediment delivery systems of the deep marine syn-rift succession. Coarse-grained sand and gravel, as well as large boulders, were emplaced by rock-falls, debris flows and turbulent flows sourced from the immediate footwall. The bulk of these sediments were point-sourced and accumulated in a system of coalescing fans that formed a clastic wedge along the boundary fault system. In addition, this clastic wedge was supplied by a sand-rich turbidite system that is interpreted to have entered the basin axially, possibly via a prominent relay ramp within the main fault system. The proximal part of the clastic wedge consists of a steeply dipping, conformable succession of thick-bedded deposits from gravity flows that transformed down-slope from laminar to turbulent flow behaviour. Pervasive scour-and-fill features are observed at the base of the depositional slope of the clastic wedge, c. 5 km into the basin. These scour-fills are interpreted to have formed from high-density turbulent flows that were forced to decelerate and likely became subject to a hydraulic jump, forming plunge pools at the base of slope. The distal part of the wedge represents a basin plain environment and is characterised by a series of crude fining upward successions that are interpreted to reflect changes in the rate of accommodation generation and sediment supply, following from periodic increases in fault activity. This study demonstrates how rift basin physiography directly influences the behaviour of gravity flows. Conceptual models for the stratigraphic response to periodic fault activity, and the transformation and deposition of coarse-grained gravity flows in a deep water basin with strong contrasts in slope gradients, are presented and discussed. 相似文献
16.
《Marine and Petroleum Geology》2003,20(6-8):587-600
A regional study of the Veracruz Basin provided an excellent view of long-term deepwater sedimentation patterns from an evolving foreland-type basin. The regional seismic and well-log data set allows for an accurate reconstruction of slope and basin-floor depositional patterns, lithologic compositions, and paleogradients from a continuous succession of bathyal strata that span the Miocene to the lower Pliocene. Variations in Miocene and Pliocene deepwater reservoirs can be linked to prevailing slope characteristics. The Miocene basin had a high-gradient, tectonically generated slope, and the Pliocene basin had a low-gradient constructional slope. The Miocene basin owes its steep margin to the tectonic stacking of early Tertiary, Laramide-age thrust sheets. The Miocene margin shed a mixture of coarse elastic sediments (sands, gravels, and cobbles) and fines (silts and clays) that were transported into the deep basin via turbidity currents and debris flows. Channelized deposits dominate the Miocene slope, and reservoirs occur in long-lasting basement-confined canyons and shorter-lived shallower erosional gulleys. Thick and areally-extensive basin-floor fans exist outboard of the strongly channelized Miocene slope. Fan distribution is strongly controlled by synsedimentary contractional anticlines and synclines. In contrast, the latest Miocene to early Pliocene basin development was dominated by a strongly prograding wedge of shelf and slope deposits that was induced by volcanogenic uplift and increased sediment supply. During this phase, turbidite reservoirs are limited to narrow and sinuous deepwater channels that reside at the toe of the constructional clinoforms and areally limited, thinner basinal fans. 相似文献
17.
The Plio-Pleistocene stratigraphic record of the Peri-Adriatic basin (eastern central Italy) is well exposed along the uplifted western margin of the basin and consists of a series of coarse-grained slope canyon fills encased in a thick succession of hemipelagic mudstones. This study deals with the detailed sedimentology, stratal architecture, and sequence-stratigraphic interpretation of two of these submarine canyon-fills (namely CMC1 and CMC2) exposed at Colle Montarone. These strata contain widespread evidence of gravity-driven sedimentation processes, with high- and low-density turbidity currents, slumps and cohesive debris flows being responsible for most of the sediment transport and deposition. Beds are organised into four recurrent lithofacies, each corresponding to a specific deep-water depositional element: (i) clast-supported conglomerates (channel complexes); (ii) thin-bedded sandstones and mudstones (levee-overbank); (iii) very thinly-bedded mudstones (tributary channels); (iv) pebbly mudstones and chaotically bedded mudstones (mass-transport complexes). 相似文献
18.
The Upper Cretaceous and Paleocene Gottero Sandstone was deposited as a small deep-sea fan on ophiolitic crust in a trench-slope
basin. It was thrust northeastward as an allochthonous sheet in Early and Middle Cenozoic time. The Gottero, as thick as 1500
m, was probably derived from erosion of Hercynian granites and associated metamorphic rocks in northern Corsica. Outcrops
of inner-fan channel, middle-fan channel and interchannel, outer-fan lobe, fan-fringe, and basin-plain facies associations
indicate that the depositional model of Mutti and Ricci Lucchi for mixed-sediment deep-sea fans can be used. The original
fan had a radius of 30 to 50 km.
Margin setting represents fan and/or source area 相似文献
19.
Basin floor fans contain some of the largest deep-water hydrocarbon accumulations discovered, however they also demonstrate extremely complex stratigraphic architecture, understanding of which is crucial for maximum recovery. Here we develop a new method, based upon palynofacies analysis, for the distinction of the different depositional environments that are commonly associated with basin floor fans. Previous studies and our sedimentological analysis allow good confidence in the discrimination of the different depositional environments of the outcropping Marnoso-Arenacea Formation fan system. One hundred and thirty-five samples were collected from mudstones in conjunction with sedimentary logging of 871 m of outcrops. Six lithofacies associations are described and interpreted to represent lobe axis, lobe fringe, fan fringe, contained interlobe, basin plain, and starved high depositional sub-environments. Palynofacies of these elements demonstrate turbidites to be rich in terrestrial organic matter, with sixteen categories of matter recognised. The abundances and proportions of particles varies between sub-environments, with lobe axis deposits containing the largest, densest particles, with a transition to ever smaller and lighter particles moving toward the basin plain. Fuzzy C-means statistical analysis was used to explore this trend. Distribution of organic matter is not random, but is dominated by hydrodynamic sorting and sequential fall-out of particles as turbidity currents passed across the basin. This allows a palynofacies classification scheme to be constructed to assist the identification of depositional environments of submarine fans, which may be combined with subsurface data to assist reservoir characterisation. 相似文献
20.
The 380 m thick fine-grained Vischkuil Formation comprises laterally extensive hemipelagic mudstones, separated by packages of graded sandstone and siltstone turbidites, and volcanic ash beds, and is an argillaceous precursor to a 1 km thick sand-prone basin floor fan to shelf succession. The Vischkuil Formation provides an insight into the process by which regional sand supply is initiated and for testing sequence stratigraphic principles in a basin plain setting. Regionally mapped 1–2 m thick hemipelagic mudstone units are interpreted as condensed drapes that represent the starved basin plain equivalents of transgressive systems tracts and maximum flooding surface on the coeval shelf (now removed during later uplift). The section above each mudstone drape comprises siltstone turbidites interpreted as highstand systems tract deposits and a surface of regional extent, marked by an abrupt grain size shift to fine sandstone. These surfaces are interpreted as sequence boundaries, related to abrupt increases in flow volume and delivery of sand grade material to the basin-plain. The interpreted lowstand systems tract comprises sandstone-dominated turbidites and is overlain by another hemipelagic mudstone drape. The upper Vischkuil Formation is marked by three 20–45 m thick debrites, with intraformational sandstone clasts up to 20 cm in diameter that can be mapped over 3000 km2. In each case, debrite emplacement resulted in widespread deformation of the immediately underlying 3–10 m of silty turbidites. A sequence boundary is interpreted at the base of each deformation/debrite package. Six depositional sequences are recognised and the interfered energy shift across each successive sequence boundary and LSTs include a larger volume of sandstone increases up section. The lower two sequences thin to the NW and show NW-directed palaeocurrents. The four overlying sequences show a polarity switch in palaeocurrent directions and thinning, to the E and SE. Sequence 6 is overlain sharply by the 300 m thick sandstone dominated Fan A of the Laingsburg Formation. The LST debrites may indicate gradual development of major routing conduits that subsequently fed Fan A. The polarity shift from westward flowing turbidity currents to an eastward prograding deepwater to shelf system represents establishment of a long term feeder system from the west. Sand supply to the Karoo basin floor was established in an incremental, stepwise manner. Given the early post-glacial setting in an icehouse climate, glacio-eustatic sea-level changes are considered to have been the main control on sequence development. 相似文献