共查询到20条相似文献，搜索用时 62 毫秒
1.
In fold-and-thrust belts, shortening is mainly accommodated by thrust faults which are preferential zones for recrystallisation and mass transfer. This study focuses on a detachment fault related to the emplacement of the Monte Perdido thrust unit in the southern Pyrenees. The studied fault zone consists of a 10 m thick intensively foliated phyllonite developed within the Millaris marls, of Eocene age. The lithological homogeneity of the hanging wall and footwall allows us to compare the Millaris marls outside the fault zone with the highly deformed marls located in the fault zone and to quantify the chemical, mineralogical and volumetric changes related to deformation processes along the fault.The Millaris marls are composed of detrital quartz, illite, chlorite, minor albite and pyrite, in a micritic calcite matrix. In the fault zone, the cleavage planes are marked by clay minerals and calcite ± chlorite veins attest to fluid–mineral interactions during deformation.The mineral proportions in all samples from both the fault zone and Millaris marls have been quantified by two methods: (1) X-ray diffraction and Rietveld refinement, and (2) bulk chemical analyses as well as microprobe analyses to calculate modal composition. The excellent agreement between the results of these two methods allows us to estimate mineralogical variations using a modification of the Gresens' equation. During fault activation, up to 45 wt% of calcite was lost while the amounts of quartz and chlorite remained unchanged. Illite content remained constant to slightly enriched. The mineralogical variations were coupled with a significant volume loss (up to 45%) mostly due to the dissolution of micritic calcite grains. Deformation was accompanied by pressure solution and phyllosilicates recrystallisation. These processes accommodated slip along the fault. They required fluids as catalyst, but they did not necessitate major chemical transfers. 相似文献
2.
The Jabal Qusaybah Anticline, in north Oman, is affected by syn-folding strike-slip and extensional fault zones developed during foreland deformation ahead of the Northern Oman Mountains thrust wedge, in Cenozoic times. Migration of fluids in fault-damage zones is recorded in complex calcite vein networks. By employing the microthermometric and compositional microanalysis of the fluid inclusions (crush-leach), two distinct generations of veins have been studied. The aim was to determine the source of elevated salinity in fluids involved in their cementation and explain their compositional evolution through fluid-rock interactions. The ionic ratios (Na/Br and Cl/Br) obtained from crush-leach analysis give supporting evidence that the elevated salinity of fluid inclusions in both vein groups originated from an evaporated seawater beyond the onset of halite precipitation (residual brines). The results reveal a gradual increase in salinity of the fluids, F/Cl molar ratios, as well as Li/Cl molar ratios. These results imply the progressively increasing contribution of evaporitic residual brines and fluids that interacted with, or were derived from siliciclastic rocks. We suggest that the most likely origin of the former fluids is provided by residual brines associated with precipitation of the Ara evaporites (Cambrian). The regional driving mechanism for such a significant fluid migration is believed to be compaction-driven upward flow that was channeled into faults and fractures during major deformational events. 相似文献
3.
The Upper Cretaceous carbonates cropping out in the Murge Plateau are good analogues of the fractured and faulted carbonate oil reservoirs of southern Italy. For this reason, a detailed field analysis focused on structural architecture of fault and fracture networks has been carried out in the Murge Plateau. The well-bedded carbonates exposed there are crosscut by a set of bed-parallel stylolites and two sets of bed-perpendicular cross-orthogonal joints/veins. These structural elements were likely formed under vertical loading during burial diagenesis and flexure of the Apulian foreland of the Southern Apennines fold-and-thrust belt. Bed-parallel stylolites and bed-perpendicular cross-orthogonal joints/veins represent the background deformation that was overprinted by the fault-related localized deformation. The fault sets documented in the study area are arranged in two kinematically-compatible fault networks. The first one is made up of WNW-ESE and NNW-SSE oriented strike-slip faults, right- and left-lateral, respectively, and NW–SE oriented normal faults. The second fault network consists of WNW-ESE oriented left-lateral strike-slip faults, and NE–SW oriented normal faults.First, both architecture and dimensional parameters of the fault and fracture networks have been characterized and computed by means of statistical analysis. Then, the permeability structures associated to the aforementioned networks have been assessed in order to determine the role exerted by fault architecture and dissolution/cementation processes on the fluid storage and migration pathways within the studied platform carbonates. Network 1 faults show a quite variable fluid behavior, in which the fluid flow is strongly affected by inherited structural elements and karst dissolution, whereas network 2 faults show a more uniform, fluid conduit behavior. 相似文献
4.
Jiahao Wang Xiong Pang Daqing Tang Baojun Liu Donghao Xu 《Marine Geophysical Researches》2013,34(3-4):195-207
The Baiyun Sag, situated at the north continental slope of the South China Sea, is a main sub-unit in the Southern Depression Belt of the Pearl River Mouth Basin. In this Sag, the middle Eocene Wenchang and upper Eocene–lower Oligocene Enping Formations had developed in the evolution stage of continental faulted basin. Seismic stratigraphic sequences and fault structures revealed that the Baiyun Sag was short of long-reaching boundary faults, and that it was a rifted basin greatly influenced by basement faults rather than a typical half-graben. Different from the sags in Northern Depression Belt of the Pearl River Mouth Basin which controlled by large-scale NEE-strike faults, the Baiyun Sag had been controlled by two groups of NWW-strike en echelon fault belts with approximate opposite dips, which developed in the southwest and northeast of this Sag respectively and had played the roles of boundary faults. These en echelon faults, together with narrow synclines, partial flower structures and fluid diapirs, indicated the left-lateral transtensional activities, which had resulted in subsidence center departing to main faults and stretching S-shaped. Moreover, the en echelon faults had constructed many composite transfer zones of relay ramps, and controlled the distribution of sandbodies. The en echelon fault belts are located in accordance with Nw-striking Mesozoic basement faults. Hence the left-lateral transtensional activities were responsible for the Western Pacific Plate subducting and strike slip reactivation of the basement faults. Significantly, NW-striking basement faults had forcefully determined the development of not only the Baiyun Sag but also the Xingning Sag. 相似文献
5.
Fluid flow in fractures and host rocks has been investigated in shallow buried Miocene alluvial fan deposits. A structural, petrographical (optical, CL, SE microscopes and XRD) and geochemical (microprobe and δ18O-δ13C stable isotopes) study has been performed in normal faults affecting Serravalian-Tortonian siliciclastic rocks of the Vallès-Penedès basin. These faults formed during the development of the Vallès-Penedès fault-related syncline, which caused the rotation of the earliest fractures. Faulting occurred continuously before, during and after host rock cementation. Rocks affected by faulting are represented by clay-rich gouges, which formed thanks to the high phyllite clast content within the otherwise clean and mature sandstones and conglomerates. Despite the low permeability of these rocks, cross-fault and fault-parallel fluid flows occurred in most of the faults.Host rocks and veins were cemented by two generations of calcite, i.e. Cc1 and Cc2. Cc1 precipitated from meteoric waters at shallow burial conditions whereas Cc2 precipitated from meteoric waters in a confined aquifer.Palygorskite has been identified in shear zones within the gouges indicating their later formation by interaction of Mg-rich fluids with previous smectites. These fluids probably derived from Miocene seawater expelled from the underlying Transitional–Marine Complex “TMC” by compaction.Sedimentation, fracturing and cementation occurred in a very short lapse time of about 6–7 Ma, between the Serravalian-Tortonian age of the sediments and the end of the extensional tectonics in the Vallès-Penedès fault (Pliocene). 相似文献
6.
Cenozoic structures in the Bohai Bay basin province can be subdivided into eleven extensional systems and three strike-slip systems. The extensional systems consist of normal faults and transfer faults. The normal faults predominantly trend NNE and NE, and their attitudes vary in different tectonic settings. Paleogene rifting sub-basins were developed in the hanging walls of the normal faults that were most likely growth faults. Neogene–Quaternary sequences were deposited in both the rifting sub-basins and horsts to form a unified basin province. The extensional systems were overprinted by three NNE-trending, right-lateral strike-slip systems (fault zones). Although the principal displacement zones (PDZ) of the strike-slip fault zones are developed only in the basement and lower basin sequences in some cross sections, the structural deformation characteristics of the upper basin sequences also indicate that they are basement-involved, right-lateral strike-slip fault zones. According to the relationships between faults and sedimentary sequences, the extensional systems were mainly developed from the middle Paleocene to the late Oligocene, whereas the strike-slip systems were mainly developed from the Oligocene to the Miocene. Strike-slip deformation was intensified as extensional deformation was weakened. Extensional deformation was derived from horizontal tension induced by upwelling of hot mantle material, whereas strike-slip deformation was probably related to a regional stress field induced by plate movement. 相似文献
7.
The investigation of complex geological setting is still dominated by traditional geo-data collection and analytical techniques, e.g., stratigraphic logging, dip data measurements, structural ground mapping, seismic interpretation, balance section restoration, forward modelling, etc. Despite the advantages of improving our understanding in structural geometry and fault architecture, the geospatial modelling, applying computer-aided three-dimensional geometric design, visualization and interpretation, has rarely been applied to such complex geological setting. This study used the Lenghu fold-and-thrust belt (in Qaidam basin, NE Tibetan Plateau) to demonstrate that the application of geospatial and geomechanical modelling could improve our understanding and provide an effective technique for investigating the fault architecture and strain distribution. The three-dimensional configuration of the Lenghu fold-and-thrust belt was initially derived from traditional analysis techniques, such as regional stratigraphic logging, cross section construction, meso-scale ground mapping and landsat image interpretation. The high-resolution field data and landsat image were integrated to construct the geospatial model, which was subsequently used to quantitatively investigate the fault throw changes along the Lenghu thrust fault zone and to understand its control on the lateral structural variation. The geospatial model was then restored in three dimensions to reveal the kinematic evolution of the Lenghu fold-and-thrust belt. Geomechanical modelling, using a Mass-Spring algorithm, provided an effective three-dimensional tool for structural strain analysis, which was used to predict the strain distribution throughout the overall structure, e.g., normal faults with throws ranging from meters to tens of meters in the hanging-wall. The strain distribution predicted by geomechanical modelling was then validated by the natural normal faults in the hanging-wall. The high accordance between the strain prediction and statistics of natural normal faults demonstrates good applicability of geospatial and geomechanical modelling in the complex geological setting of the Lenghu fold-and-thrust belt. The geospatial models and geomechanical models, therefore, can provide a robust technique for analyzing and interpreting multi-source data within a three-dimensional environment. We anticipate that the application of three-dimensional geospatial modelling and geomechanical modelling, integrating both multi-source geologic data and three-dimensional analytical techniques, can provide an effective workflow for investigating the fault architecture and strain distribution at different scales (e.g., ranging from regional-to meso-scale). 相似文献
8.
Christian Tueckmantel Quentin J. Fisher Carlos A. Grattoni Andrew C. Aplin 《Marine and Petroleum Geology》2012,29(1):129-142
Understanding the impact of faults on fluid flow in the subsurface is important for the extraction of oil, gas and groundwater as well as the geological storage of waste products. We address two problems present in current industry-standard workflows for fault seal analysis that may lead to fault rocks not being represented adequately in computational fluid flow models. Firstly, fluid flow properties of fault rocks are often measured only for small-scale faults with throws not exceeding a few centimetres. Large seismic-scale faults (throws >20 m) are likely to act as baffles or conduits to flow but they are seldom recovered from subsurface cores and consequently fault rock data for them is sparse. Secondly, experimental two-phase fluid flow data is lacking for fault rocks and, consequently, uncertainties exist when modelling flow across faults in the presence of two or more immiscible phases. We present a data set encompassing both single- and two-phase fluid flow properties of fault and host rocks from the 90-Fathom fault and its damage zone at Cullercoats Bay, NE England. Measurements were made on low-throw single and zones of deformation bands as well as on slip-surface cataclasites present along the ～120 m throw main fault. Samples were analysed using SEM and X-ray tomography prior to petrophysical measurements. We show that single deformation bands, deformation band zones and slip-surface cataclasites exhibit dissimilar single- and two-phase fluid flow properties. This is due to grain-size reduction being more pronounced in slip-surface cataclasites and changes in microstructure being fault-parallel for deformation bands but mostly fault-perpendicular for slip-surface cataclasites. A trend of fault rocks with low absolute permeabilities exhibiting lower relative permeabilities than more permeable rocks at the same capillary pressure is evident. 相似文献
9.
Halokinesis causes a dynamic structural evolution with the development of faults and fractures, which can act as either preferential fluid pathways or barriers. Reconstructing reactive fluid flow in salt dome settings remains a challenge. This contribution presents for the first time a spatial distribution map of diagenetic phases in a salt dome in northern Oman. Our study establishes a clear link between structural evolution and fluid flow leading to the formation of diagenetic products (barite and calcite) in the salt dome roof strata. Extensive formation of diagenetic products occurs along NNE-SSW to NE-SW faults and fractures, which initiated during the Santonian (Late Cretaceous) and were reactivated in the Miocene, but not along the E-W fault, which was generated during Early Paleocene time. We propose that the diagenetic products formed by mixing of a warm (100 °C) saline (17 wt% NaCl eq.) 87Sr enriched (87Sr/86Sr: 0.71023) fluid with colder (35 °C) meteoric fluid during Miocene to Pleistocene. The stable sulphur and strontium isotope composition and fluid inclusion data indicate that a saline fluid, with sulphate source derived from the Ara Group evaporite and Haima Supergroup layers, is the source for barite formation at about 100 °C, predominantly at fault conjunctions and minor faults away from the main graben structure in the dome. In the Miocene, the saline fluid probably ascended along a halokinesis-related fault due to fluid overpressure (due to the rising salt and impermeable layers in the overlying stratigraphic sequence), and triggered the formation of barite due to mixing with barium-rich fluids, accompanied by a drop in temperature. Subsequently, evolving salt doming with associated fault activity and erosion of the Jebel allows progressively more input of colder meteoric fluids, which mix with the saline warmer fluid, as derived from stable isotope data measured in the progressively younger barite-associated calcite, fault zone calcite and macro-columnar calcite. The reconstructed mixing model indicates a 50/50 to 90/10 meteoric/saline fluid mixing ratio for the formation of fault zone calcite, and a 10 times higher concentration of carbon in the saline fluid end member compared to the meteoric fluid end member. The presented mixing model of salt-derived fluids with meteoric fluids is suggested to be a general model applicable to structural diagenetic evolution of salt domes world wide. 相似文献
10.
During basin burial, interstitial fluids initially trapped within the sedimentary pile easily move under thermal and pressure gradients. As the main mechanism is linked to fluid overpressure, such fluids play a significant role on frictional mechanics for fault reactivation and sediment deformation.The Lodève Permian Basin (Hérault, France) is an exhumed half-graben with exceptional outcrop conditions providing access to barite-sulfide mineralized systems and hydrocarbon trapped into syn-rift roll-over faults. Architectural studies show a cyclic infilling of fault zone and associated bedding-parallel veins according to three main fluid events during dextral/normal faulting. Contrasting fluid entrapment conditions are deduced from textural analysis, fluid inclusion microthermometry and sulfur isotope geothermometer. We conclude that a polyphase history of trapping occurred during Permian syn-rift formation of the basin.The first stage is characterized by an implosion breccia cemented by silicifications and barite during an abrupt pressure drop within fault zone. This mechanism is linked to the dextral strike-slip motion on faults and leads to a first sealing of the fault zone by basinal fluid mineralization.The second stage consists of a succession of barite ribbons precipitated under overpressure fluctuations, derived from fault-valve action. This corresponds to periodic reactivations of fault planes and bedding-controlled opening localized at sulphide-rich micro-shearing structures showing a normal movement. This process formed the main mineralized ore bodies by the single action of fluid overpressure fluctuations undergoing changes in local stress distribution.The last stage is associated with the formation of dextral strike-slip pull-apart infilled by large barite and contemporaneous hydrocarbons under suprahydrostatic pressure values. This final tectonic activation of fault is linked to late basinal fluids and hydrocarbon migration during which shear stress restoration on the fault plane is faster than fluid pressure build-up.This integrated study shows the interplay action between tectonic stress and fluid overpressure in fault reactivation during basin burial that clearly impact potential economic reservoirs. 相似文献
11.
4D analogue modelling of transtensional pull-apart basins 总被引：3，自引：0，他引：3
Jonathan E. Wu Ken McClay Paul Whitehouse Tim Dooley 《Marine and Petroleum Geology》2009,26(8):1608-1623
Scaled sandbox models were used to investigate the 4D evolution of pull-apart basins formed above underlapping releasing stepovers in both pure strike-slip and transtensional basement fault systems. Serial sectioning and 3D volume reconstruction permitted analysis of the full 3D fault geometries. Results show that very different pull-apart basins are developed in transtension compared to pure strike-slip. Both types of models produced elongate, sigmoidal to rhomboidal pull-apart systems, but the transtensional pull-apart basins were significantly wider and uniquely developed a basin margin of en-echelon oblique-extensional faults. Dual, opposing depocentres formed in the transtensional model whereas a single, central depocentre formed in pure strike-slip. In transtension, a distinct narrow graben system formed above the principal displacement zones (PDZs). Cross-basin fault systems that linked the offset PDZs formed earlier in the transtensional models.Sequential model runs to higher PDZ displacements allowed the progressive evolution of the fault systems to be evaluated. In cross-section, transtensional pull-aparts initiated as asymmetric grabens bounded by planar oblique-extensional faults. With increasing displacement on the PDZs, basin subsidence caused these faults to become concave-upwards and lower in dip angle due to fault block collapse towards the interior of the basin. In addition, strain partitioning caused fault slip to become either predominantly extensional or strike-slip. The models compare closely with the geometries of natural pull-apart basins including the southern Dead Sea fault system and the Vienna Basin, Austria. 相似文献
12.
Roozbeh Foroozan Derek Elsworth Peter Flemings Frank Bilotti Sankar Muhuri 《Marine and Petroleum Geology》2012,29(1):143-151
We examine the role of basin-shortening on the development of structural compartments in passive margin basins. A coupled flow-deformation model is used to follow the evolution of an idealized prismatic basin during lateral shortening. This includes the deformation-induced generation (lateral compaction) and dissipation (hydraulic fracturing) of pore fluid pressures and the resulting natural evolution of an underlying décollement and subsidiary fault structures. This model is used to examine the influence of strata stiffnesses, strain softening, permeability-strain dependence, permeability contrast between layers, and deformation rate on the resulting basin structure and to infer fluid charge within these structures. For a geometry with a permeability contrast at the base of the basin a basal décollement forms as the basin initially shortens, excess pore pressures build from the impeded drainage and hydrofracturing releases fluid mass and resets effective stresses. As shortening continues, thrust faults form, nucleating at the décollement. Elevated pore pressures approaching the lithostat are localized at the hanging wall boundary of the faults. Faults extend to bound blocks that are vertically offset to yield graben-like structural highs and lows and evolve with distinctive surface topography and separate pore pressure signatures. Up-thrust blocks have elevated fluid pressures and reduced effective stresses at their core, and down-thrust blocks the converse. The development of increased permeability on localized fault structures is a necessary condition to yield this up-thrust and down-thrust geometry. In the anti-physical case where evolution of permeability with shear strain is artificially suppressed, pervasive shear develops throughout the basin depth as fluid pressures are stabilized everywhere to the lithostat. Correspondingly, permeability evolution with shear is an important, likely crucial, feedback in promoting localization. 相似文献
13.
Subsurface, intra-reservoir faults have subseismic portions (the fault tail) and process zones that must be considered for a complete evaluation of their role in a reservoir setting. In this paper we show that this subseismic fault domain, generally associated with all seismically mappable faults, may extend several hundred meters beyond the seismically mapped tip point, depending on vertical seismic resolution and fault displacement gradients along strike. We use reservoir modelling and fluid flow simulation of a sandstone reservoir analogue to demonstrate how a low-permeable process zone may generate steep pressure gradients in the reservoir and affect the tortuosity of reservoir fluid flow. Results and examples combined show how small adjustments in fault interpretations in the subseismic domain may significantly affect trap definition, prospect volumes, project economics and selection of exploration well locations. For production settings, we demonstrate how low-permeable fault tails and process zones may increase flow tortuosity and delay water breakthrough, thereby enhancing sweep efficiency and recovery from otherwise bypassed pockets of hydrocarbons in the reservoir. The results also indicate that process zones may contribute to pressure compartmentalization. Finally, a simple methodology for the estimation of subseismic fault continuity is presented. 相似文献
14.
We describe (1) bedding-parallel veins of fibrous calcite (beef) and (2) thrust detachments, which we believe provide good evidence for fluid overpressure in source rocks for petroleum. Our examples are from the surface or subsurface of the Magallanes-Austral Basin, which lies at the southern tip of South America. There, the best source rocks for petroleum are of Early Cretaceous age. In the central parts of the basin these source rocks have become overmature, but at the eastern edge, onshore and offshore, they are today either immature or in the oil window.In Tierra del Fuego, the foothills of the Andes consist mainly of sedimentary rocks, which have undergone thin-skinned thrusting. In the Vicuña area (Chile), Early Cretaceous source rocks have reached the surface above thrust detachments, which are visible on seismic data and well data. At the surface, we have found calcite beef, containing hydrocarbons (solid and/or fluid), in the Rio Jackson and Vicuña formations, which have reached the wet gas window. In the Rio Gallegos area (Argentina), the source rocks have not reached the surface, but seismic and well data provide good evidence for thin-skinned thrusting above flat-lying detachments in Early Cretaceous source rock, where it is in the early oil window. In contrast, there is little or no deformation where the source rock is still immature. Thus the deformation front coincides with the maturity front. Next to the central parts of the basin, where the source rocks have reached the surface within the Andes proper, they have undergone low-grade metamorphism. Within these source rocks, we have found beef veins, but of quartz, not calcite. To the east, within the foreland basin, seismic and well data provide evidence for a few compressional structures, including thin-skinned detachments in the deeply buried source rock. Finally, in the northern part of the basin (Santa Cruz province, Argentina), where it is shallower, the source rocks have reached the surface in the foothills, above a series of back-thrusts. At Lago San Martín, the source rocks have reached the oil window and they again contain calcite beef.In conclusion, where we have examined Early Cretaceous source rocks at the surface, they contain either calcite beef (if they have reached the late oil window or wet gas window) or quartz beef (if they are overmature). Independent evidence for overpressure, in the form of source-rock detachments, comes from subsurface data, especially at the southern end of the basin, where the source rocks are not overmature and deformation is relatively intense. Thus we argue that hydrocarbon generation has led to overpressure, as a result of chemical compaction and load transfer, or volume changes, or both. 相似文献
15.
Location of the southern Caribbean plate boundary has been hindered mainly because it is in large part submerged. Analysis of 28 acoustic reflection profiles along the north-central Venezuelan borderland, and a review of published data, suggest that this borderland is the site of a complex fault zone, formally defined as the Morón fault zone, which encompasses the nodal region of the Boconó-Oca-El Pilar fault system. The Morón fault zone consists of: (1) an eastward extension of the Oca-Chirinos fault zone at about 10° 50′ N latitude; (2) a probable eastward continuation of the Boconó-Morón faults along the Venezuelan coast, which splits into the Avila and Macuto faults, north and east of Caracas; (3) the Tacagua fault, which is a southeastward trending splinter fault of the Oca-Chirinos fault zone; (4) and the westward extension of the Cariaco pull-apart basin and the El Pilar fault zone. All of these faults and fault zones are active, as shown by offset sea bottom, offset Pleistocene-Holocene features, and seismicity. It is suggested that the Oca-Chirinos fault zone represents a formerly more active part of the plate boundary. Since the Late Tertiary (?) or Quaternary, the Boconó fault zone was incorporated into the plate boundary, and the northwestern block (Bonaire block) was thrust northeastward over the Caribbean crust. 相似文献
16.
基底断裂与盆地是一对相互影响的伴生构造,断裂活动控制盆地内沉积填充和构造样式以及后期资源的分布。本文利用琼东南盆地2′×2′的自由空间重力异常,在进行地形校正、布格异常校正得到布格重力异常的基础上求得重力水平梯度矢量。尝试利用重力水平梯度矢量对基底断裂进行划分并取得良好效果:在盆地基底划分出48条断裂,并将其分为3个等级,其中一级断裂5条,二级断裂8条,三级断裂35条;将确定的断裂与其他地质、地球物理方法(地震剖面)确定的断裂进行比较,发现在主要格架上具有一致性;重力水平梯度矢量法与其他解释方法比较具有成本低廉、方法简单、结果直观的优点。 相似文献
17.
In this paper, the diagenesis from either side of a major Cenozoic reverse fault in the Northern Oman Mountains is documented. Detailed petrographical and geochemical analysis of calcite-filled fractures in carbonate strata of Late Triassic and Early Cretaceous age in the hanging wall and footwall in Wadi Ghalilah reflect a different diagenetic history. In both hanging wall and footwall most of the fractures are pre-burial, extensional in origin, formed by a crack-seal mechanism, and the calcite vein infill has a host-rock buffered signature. In the hanging wall, the fluid responsible for calcite precipitation of these extensional fractures was a marine fluid at 60 °C. These veins predate deep burial and contractional tectonic deformation and consequently do not provide any information about syntectonic fluid flow. Neither do the pre-burial extension fractures in the footwall which are also host-rock buffered. The fractures post-dating the tectonic stylolitization in the footwall, by contrast, show evidence of syntectonic migration of saline formation waters at temperatures between 80 and 160 °C during contractional deformation. These fluids probably were sourced from the subsurface via the reverse fault, which acted as a fluid conduit. At the same time, however, this fault functioned as a permeability barrier towards the hanging wall, since no evidence of syntectonic fluid flow is present here. In this way compartmentalization of the hanging wall and footwall block was realized. 相似文献
18.
Continental collision between Iranian and Arabian plates resulted in the formation of the Zagros fold–thrust belt and its associated foreland basin. During convergence, pre-existing faults in the basement were reactivated and the sedimentary cover was shortened above two different types of basal decollement (viscous/frictional). This led to heterogeneous deformation which segmented not only the Zagros fold–thrust belt but also its foreland basin into different compartments resulting in variation in facies, thickness and age of the sediment infill.Based on this concept, a new tectono-sedimentary model is proposed for one of the most important syn-tectonic sedimentary unit, the Gachsaran salt in the Zagros foreland basin. In this proposed model, it is argued that differential propagation of the deformation front above decollements with different mechanical properties (viscous versus frictional) results in along-strike irregularity of the Zagros deformation front whereas movement along pre-existing basement faults leads to development of barriers across the Zagros basin. The irregularity of the deformation front and the cross-basin barriers divided the Zagros foreland basin into six almost alternating sub-basins where Gachsaran salt and its non-salt equivalents are deposited. In the salt sub-basins, two different processes were responsible for the deposition of Gachsaran salt: (1) evaporation, and (2) dissolution of extruding Hormuz salt and its re-precipitation as Gachsaran salt. Re-precipitation was probably the most significant process responsible for the huge deposit of Gachsaran salt in the extreme south-east part of the Zagros foreland basin. 相似文献
19.
The paleokarst-unconformity at the top of the Ordovician Yingshan Formation in the central Tarim basin was exposed to air for at least 10 Ma, providing favorable conditions for the later formation of high-quality reservoirs. During the karstification process, the fault system plays an important role in controlling the development of paleokarst. This study characterized the fault system through the paleokarst features on the northern slope of the Tazhong High and examined in detail the impacts of the fault system on paleokarst distribution. Formation Micro-Imager logs and seismic curvature change rate were used for characterizing the fault system in different scales. The results revealed three sets of faults in this region. Cross-cutting relationships, unconformities, and relation between faults and karstification indicate Mid-to-Late Ordovician thrust faults, Silurian-Devonian strike-slip faults, and Permian tension faults. “Bright spots” in seismic records calibrated by Formation Micro-Imager logs were used for indicating paleokarst features and different depth distributions, respectively. Furthermore, the study employed spectral decomposition technique to characterize the morphology of paleocave complexes in detail. The results show the Mid-Late Ordovician thrust faults heavily impacted the distribution of paleokarst mainly distributed along master and secondary thrust faults in shallow areas, as well as along master basement-involved thrust faults in deep strata, and along the most pronounced area of paleokarst, Tazhong No. 10 fault zone bounded by back thrusts. The data provides new forecasting information for deep hydrocarbon exploration in paleokarst-related reservoirs of the Yingshan Formation. 相似文献
20.
Chun-Feng Li Zuyi Zhou Jiabiao Li Bing Chen Jianhua Geng 《Marine Geophysical Researches》2008,29(4):223-238
We made a systematic investigation on major structures and tectonic units in the South China Sea basin based on a large magnetic
and seismic data set. For enhanced magnetic data interpretation, we carried out various data reduction procedures, including
upward continuation, reduction to the pole, 3D analytic signal and power spectrum analyses, and magnetic depth estimation.
Magnetic data suggest that the South China Sea basin can be divided into five magnetic zones, each with a unique magnetic
pattern. Zone A corresponds roughly to the area between Taiwan Island and a relict transform fault, zone B is roughly a circular
feature between the relict transform fault and the northwest sub-basin, and zones C, D, and E are the northwest sub-basin,
the east sub-basin, and the southwest sub-basin, respectively. This complexity in basement magnetization suggests that the
South China Sea evolved from multiple stages of opening under different tectonic settings. Magnetic reduction also fosters
improved interpretation on continental margin structures, such as Mesozoic and Cenozoic sedimentary basins and the offshore
south China magnetic anomaly. We also present, for the first time, interpretations of three new 2D reflection seismic traverses,
which are of ~2,000 km in total length and across all five magnetic zones. Integration of magnetic and seismic data enables
us to gain a better 3D mapping on the basin structures. It is shown that the transition from the southwest sub-basin to the
east sub-basin is characterized by a major ridge formed probably along a pre-existing fracture zone, and by a group of primarily
west-dipping faults forming an exact magnetic boundary between zones D and E. The northwest sub-basin has the deepest basement
among the three main sub-basins (i.e., the northwest sub-basin, the southwest sub-basin, and the east sub-basin). Our seismic
data also reveal a strongly faulted continent–ocean transition zone of about 100 km wide, which may become wider and dominated
with magmatism or transit to an oceanic crust further to the northeast. 相似文献