共查询到20条相似文献，搜索用时 437 毫秒
1.
Fracture and in-situ stress studies were conducted for unconventional prospect evaluation in the Silurian Qusaiba Shale, northern Saudi Arabia. Borehole image logs, oriented cores, seismic, and drilling observations were used in the studies. The fractures include natural fractures and induced fractures. The induced fractures were studied to assess the stress regime in terms of directions and magnitudes. The present day maximum horizontal in-situ stress trend varies from NNW-SSE to NNE-SSW, and shows a regional pattern dominated by Arabian plate tectonics. The relative magnitudes of the current day stresses are characteristic of an extensional to strike-slip regime. Natural fractures of microscopic (microfractures) to macroscopic (macrofractures) scales include extension fractures (joints/veins), and faults manifested as shear and hybrid (extensional-shear and compressional-shear) fractures. Joints clustering into zones are rare, unless when associated with fault zones. Over half of the faults (56%) show clustering into fault zones with their widths (thickness) varying by up to 5 orders of magnitude, and lengths and displacements varying by up to 4 orders of magnitudes respectively. The study identified five distinctive, regional, fracture sets: one gently dipping (bedding-parallel or at low angle to bedding) and up to four moderately to steeply dipping fracture sets: an easterly striking set is the oldest, followed by three younger major sets striking NNW-SSE, N-S, and NNE-SSW. The younger fractures are nearly parallel to the present day maximum horizontal in-situ stress. Crack-seal mechanism (natural hydrofracturing) dominates initial fracture growth, some with several phases of partial to complete mineralization or coating, dominated by calcite, quartz, and dolomite. Aqueous and hydrocarbon gaseous and fluid inclusions are common in the fractures' mineral filling. The regional nature of in-situ stresses and natural fractures means their occurrence, orientation, relative dominance, and relative age and relative apertures are easier to predict and manipulate for well planning and completion, including hydrofracturing. Forward modeling shows that natural fracture network are not critically stressed under reservoir conditions but when subjected to massive hydrofracture stimulation they and the bedding discontinuities form the seeds for the growth of a complex hydrofracture network that potentially grows out of presumed stress-barriers. Lack of stress rotation around faults in wells supports the modeling results. Microseismic monitoring gives time-lapse (incremental) microseismic events of two types; random and linear patterns parallel to maximum horizontal in-situ stress and the predominant natural fracture trend. Bulk microseismic cloud has no unique link to fault trends mapped from high resolution borehole images. This finding challenges the usability of uncalibrated microseimic monitoring of massive hydrofracturing to map faults. 相似文献
2.
Fabrizio Storti Fabrizio BalsamoFederico Cappanera Giambattista Tosi 《Marine and Petroleum Geology》2011,28(7):1315-1332
Chalk is exposed in the Heidestrasse quarry at Lägerdorf, at the top of the NE-SW trending Krempe salt ridge. Structural data indicate the presence of two joint sets, striking almost parallel and perpendicular to the salt ridge, respectively, and of a set of conjugate extensional faults and fault zones striking NW-SE, i.e. almost perpendicular to the salt ridge. Within the overall NW-SE trend of joints and faults, strike variations occur from the massive chalk exposed in the lower half of the quarry, to the overlying layered chalk. A large variability characterizes the normalized spacing of both joint sets, which does not show any clear trend with layer dip. In situ measurements indicate that the cross-sectional permeability of tight joints increases 1-2 orders of magnitude with respect to the undeformed chalk. We propose that joint and fault azimuthal variability resulted from changes through time of the stress ellipsoid at the top of the salt ridge, while joint spacing variability is associated with the weak mechanical influence of bedding in chalk. Azimuthal variability improves fracture connectivity and, hence, permeability and fluid flow. 相似文献
3.
Faults and their associated damage zones in sedimentary basins can be sealing, impeding fluid flow and creating permeability barriers, or open, creating fluid pathways. This impacts the reservoir potential of rocks in fault damage zones. Stylolitization and fracturing severely impacted permeability through compartmentalization and cementation of Apium-1, an exploration hole drilled in the northern Perth Basin, Western Australia. Apium-1 is located 1 km into the hanging wall block damage zone of a major NNW-trending normal fault. The drill core consists of fine- to medium-grained quartz arenite overlain by a coarse-grained lag and capped by impermeable shale. It was quantitatively characterized by sedimentary and structural logging, and microstructural and porosity-permeability analysis. Fractures and stylolites in the damage zone of the major fault are shown to have been sealed. Extensional cracks have been sealed by quartz precipitation; shear fractures that locally preserve brecciation are always quartz and siderite cemented; stylolites are common and contain halos of quartz cementation. In each case, porosity was reduced to approximately 1%, with concomitant reduction of permeability to <<0.01 mD. These structures are observed to be interconnected in the core and are likely to form a larger-scale 3D network of steeply-dipping fractures and shallowly-dipping stylolites. The bulk permeability of the damage zone would reflect the permeability of the fractures and stylolites, compartmentalizing the Mesozoic rocks in the northern Perth Basin into elongate NW-SE trending blocks if the magnitude of stress does not exceed the cemented rock strength. 相似文献
4.
Cenozoic structures in the Bohai Bay basin province can be subdivided into eleven extensional systems and three strike-slip systems. The extensional systems consist of normal faults and transfer faults. The normal faults predominantly trend NNE and NE, and their attitudes vary in different tectonic settings. Paleogene rifting sub-basins were developed in the hanging walls of the normal faults that were most likely growth faults. Neogene–Quaternary sequences were deposited in both the rifting sub-basins and horsts to form a unified basin province. The extensional systems were overprinted by three NNE-trending, right-lateral strike-slip systems (fault zones). Although the principal displacement zones (PDZ) of the strike-slip fault zones are developed only in the basement and lower basin sequences in some cross sections, the structural deformation characteristics of the upper basin sequences also indicate that they are basement-involved, right-lateral strike-slip fault zones. According to the relationships between faults and sedimentary sequences, the extensional systems were mainly developed from the middle Paleocene to the late Oligocene, whereas the strike-slip systems were mainly developed from the Oligocene to the Miocene. Strike-slip deformation was intensified as extensional deformation was weakened. Extensional deformation was derived from horizontal tension induced by upwelling of hot mantle material, whereas strike-slip deformation was probably related to a regional stress field induced by plate movement. 相似文献
5.
The assessment of deformation types within the slope of a carbonate platform can be complicated by the possible interaction of rooted (tectonically-induced) and superficial (gravity-driven) structures. An ideal case study to document and distinguish tectonically- and gravity-driven structures is provided by the Cretaceous slope-to-basin carbonates exposed in the Gargano Promontory, southern Italy. These carbonates formed adjacent to the Apulian platform margin, which was oriented approximately NE–SW to NW–SE along the southern and northern edges of the promontory, respectively. Slump-related folds are characterised by axial planes typically oriented either sub-parallel or at small angles to the strike of the inferred paleoslope. In fact, the strike of folds is roughly NE–SW in the southern portion of the study area, whereas it is NW–SE in the northern part. Correspondingly, gravity-driven normal and reverse faults strike sub-parallel and at acute angles to the adjacent Apulian paleoslope. Cretaceous tectonic faults in the slope-to-basin carbonates form two principal sets striking NW–SE and WNW-ESE. The former set is made up of normal faults and the latter one includes mainly oblique-slip normal faults. Neither normal nor oblique-slip normal faults show any relationship with the geometry of the paleoslope. The results obtained from this study may help the interpretation of subsurface data in those geological contexts in which the interplay of gravitational and tectonic processes is responsible for deformation. 相似文献
6.
This article focuses on field- and laboratory-based characterization of vertically persistent fractures that are part of oblique-slip normal fault zones and crosscut the Cretaceous platform and overlaying ramp carbonates outcropping at Maiella Mountain (central Italy). The achieved results show that: (i) fault damage zones are wider and more densely fractured in the platform carbonates than in the ramp ones; (ii) joints and sheared joints composing the fault damage zones are taller, better connected and less spaced within the former rocks than in the ramp carbonates. The aforementioned structural differences are interpreted to be a consequence of the different mechanical properties of the platform and ramp carbonates during failure. At Maiella Mountain, platform carbonates are, indeed, made up of overall stiffer (higher Uniaxial Compressive Strength values) and less porous rocks, due to more abundant intergranular void-filling cement and presence of matrix.In terms of hydrocarbon flow and recovery, geometric and dimensional attributes of fractures suggest that the well-connected network of closely spaced fractures cutting across the platform carbonates may form efficient pathways for both vertical and horizontal hydrocarbon flow. In contrast, the relatively poorly connected and low-density fracture network affecting the ramp carbonates is likely less efficient in providing fairways for flowing hydrocarbons. 相似文献
7.
During basin burial, interstitial fluids initially trapped within the sedimentary pile easily move under thermal and pressure gradients. As the main mechanism is linked to fluid overpressure, such fluids play a significant role on frictional mechanics for fault reactivation and sediment deformation.The Lodève Permian Basin (Hérault, France) is an exhumed half-graben with exceptional outcrop conditions providing access to barite-sulfide mineralized systems and hydrocarbon trapped into syn-rift roll-over faults. Architectural studies show a cyclic infilling of fault zone and associated bedding-parallel veins according to three main fluid events during dextral/normal faulting. Contrasting fluid entrapment conditions are deduced from textural analysis, fluid inclusion microthermometry and sulfur isotope geothermometer. We conclude that a polyphase history of trapping occurred during Permian syn-rift formation of the basin.The first stage is characterized by an implosion breccia cemented by silicifications and barite during an abrupt pressure drop within fault zone. This mechanism is linked to the dextral strike-slip motion on faults and leads to a first sealing of the fault zone by basinal fluid mineralization.The second stage consists of a succession of barite ribbons precipitated under overpressure fluctuations, derived from fault-valve action. This corresponds to periodic reactivations of fault planes and bedding-controlled opening localized at sulphide-rich micro-shearing structures showing a normal movement. This process formed the main mineralized ore bodies by the single action of fluid overpressure fluctuations undergoing changes in local stress distribution.The last stage is associated with the formation of dextral strike-slip pull-apart infilled by large barite and contemporaneous hydrocarbons under suprahydrostatic pressure values. This final tectonic activation of fault is linked to late basinal fluids and hydrocarbon migration during which shear stress restoration on the fault plane is faster than fluid pressure build-up.This integrated study shows the interplay action between tectonic stress and fluid overpressure in fault reactivation during basin burial that clearly impact potential economic reservoirs. 相似文献
8.
南昆嵩地区是万安盆地西部负向构造单元,其中部N–S向断裂贯穿南北,独特的构造特征使其成为研究万安盆地西部构造演化与区域断裂走滑活动的窗口。将研究区沉积地层划分为3套构造层,通过回剥法绘制南昆嵩地区构造–沉积充填剖面,并计算南昆嵩地区构造沉降量以及构造沉降速率,论述南昆嵩地区构造演化史与沉降过程以及控制因素。研究结果表明:下部构造层和中部构造层中断裂组合样式主要为卷心型断层、“Y”型断层、阶梯状断层和高角度花状构造等,断裂延伸方向大致可分为:N–S向、W–E向和NE–SW向3种;上部构造层断裂不发育,为稳定沉积;在区域走滑断裂以及南海扩张运动的控制下,南昆嵩地区始新世以来构造演化经历4个阶段:初始裂谷期、伸展断拗期、走滑改造期和热沉降期,新生代地层构造性质也表现为以伸展与走滑作用为主–走滑断裂控制–热沉降的三段式转变。 相似文献
9.
The investigation of complex geological setting is still dominated by traditional geo-data collection and analytical techniques, e.g., stratigraphic logging, dip data measurements, structural ground mapping, seismic interpretation, balance section restoration, forward modelling, etc. Despite the advantages of improving our understanding in structural geometry and fault architecture, the geospatial modelling, applying computer-aided three-dimensional geometric design, visualization and interpretation, has rarely been applied to such complex geological setting. This study used the Lenghu fold-and-thrust belt (in Qaidam basin, NE Tibetan Plateau) to demonstrate that the application of geospatial and geomechanical modelling could improve our understanding and provide an effective technique for investigating the fault architecture and strain distribution. The three-dimensional configuration of the Lenghu fold-and-thrust belt was initially derived from traditional analysis techniques, such as regional stratigraphic logging, cross section construction, meso-scale ground mapping and landsat image interpretation. The high-resolution field data and landsat image were integrated to construct the geospatial model, which was subsequently used to quantitatively investigate the fault throw changes along the Lenghu thrust fault zone and to understand its control on the lateral structural variation. The geospatial model was then restored in three dimensions to reveal the kinematic evolution of the Lenghu fold-and-thrust belt. Geomechanical modelling, using a Mass-Spring algorithm, provided an effective three-dimensional tool for structural strain analysis, which was used to predict the strain distribution throughout the overall structure, e.g., normal faults with throws ranging from meters to tens of meters in the hanging-wall. The strain distribution predicted by geomechanical modelling was then validated by the natural normal faults in the hanging-wall. The high accordance between the strain prediction and statistics of natural normal faults demonstrates good applicability of geospatial and geomechanical modelling in the complex geological setting of the Lenghu fold-and-thrust belt. The geospatial models and geomechanical models, therefore, can provide a robust technique for analyzing and interpreting multi-source data within a three-dimensional environment. We anticipate that the application of three-dimensional geospatial modelling and geomechanical modelling, integrating both multi-source geologic data and three-dimensional analytical techniques, can provide an effective workflow for investigating the fault architecture and strain distribution at different scales (e.g., ranging from regional-to meso-scale). 相似文献
10.
During compressive events, deformation in sedimentary basins is mainly accommodated by thrust faulting and related fold growth. Thrust faults are generally rooted in the basement and may act as conduits or barriers for crustal fluid flow. Most of recent studies suggest that fluid flow through such discontinuities is not apparent and depends on the structural levels of the thrust within the fold-and-thrust belt.In order to constrain the paleofluid flow through the Jaca thrust-sheet-top basin (Paleogene southwest-Pyrenean fold-and-thrust belt) this study compares on different thrust faults located at different structural levels. The microstructures in the different fault zones studied are similar and consist of pervasive cleavage, calcite shear veins (SV1), extension veins (EV1) and late dilatation veins (EV3). In order to constrain the nature and the source of fluids involved in fluid-rock interactions within fault zones, a geochemical approach, based on oxygen and carbon stable isotope and trace element compositions of calcite from different vein generations and host rocks was adopted. The results suggest a high complexity in the paleohydrological behaviors of thrust faults providing evidence for a fluid-flow compartmentalization within the basin. Previous studies in the southern part of the Axial Zone (North of the Jaca basin) indicates a circulation of deep metamorphic water, probably derived from the Paleozoic basement, along fault zones related to the major basement Gavarnie thrust. In contrast, in northern part of the Jaca basin, the Monte Perdido thrust fault is affected by a closed hydrological fluid system involving formation water during its activity. The Jaca and Cotiella thrust faults, in turn, both located more to the south in the basin, are characterized by a composite fluid flow system. Indeed, stable isotope and trace element compositions of the first generations of calcite veins suggest a relatively closed paleohydrological system, whereas the late calcite vein generations, which are probably associated with the late tectonic activity of the basin, support a contribution of both meteoric and marine waters. Based on these results, a schematic fluid-flow model is presented. This model allows visualization of three main fluid flow compartments along a N–S transect. 相似文献
11.
The Jabal Qusaybah Anticline, in north Oman, is affected by syn-folding strike-slip and extensional fault zones developed during foreland deformation ahead of the Northern Oman Mountains thrust wedge, in Cenozoic times. Migration of fluids in fault-damage zones is recorded in complex calcite vein networks. By employing the microthermometric and compositional microanalysis of the fluid inclusions (crush-leach), two distinct generations of veins have been studied. The aim was to determine the source of elevated salinity in fluids involved in their cementation and explain their compositional evolution through fluid-rock interactions. The ionic ratios (Na/Br and Cl/Br) obtained from crush-leach analysis give supporting evidence that the elevated salinity of fluid inclusions in both vein groups originated from an evaporated seawater beyond the onset of halite precipitation (residual brines). The results reveal a gradual increase in salinity of the fluids, F/Cl molar ratios, as well as Li/Cl molar ratios. These results imply the progressively increasing contribution of evaporitic residual brines and fluids that interacted with, or were derived from siliciclastic rocks. We suggest that the most likely origin of the former fluids is provided by residual brines associated with precipitation of the Ara evaporites (Cambrian). The regional driving mechanism for such a significant fluid migration is believed to be compaction-driven upward flow that was channeled into faults and fractures during major deformational events. 相似文献
12.
As worldwide hydrocarbon exploration has extended from shallowly to deeply buried strata, reservoir quality has attracted substantial and persistent interest in petroleum geology. In particular, deeply buried strata (>5500 m) in the Tarim Basin have attracted considerable attention because carbonate reservoirs that have experienced fracture or dissolution have also been shown to demonstrate considerable hydrocarbon potential. Therefore, it is necessary to determine how these reservoirs are developed and distributed in detail from both scientific and practical standpoints.In this paper, we address this issue using a case study in the southern Tahe area, which is contained within the largest Palaeozoic marine oilfield in China. In the northern Tahe area, mega-paleokarst systems developed in the Ordovician strata; however, the reservoir quality in the southern part of the Tahe area is relatively poor because it is covered by insoluble formations during karstification. Observations of cores and analyses of images of well logging demonstrate that these reservoirs are dominated by caves, vugs and fractures that have developed near faults. We speculate that the faults penetrating insoluble formations represent the main dissolution passages that originally developed these karstic fault systems. Additionally, we analyse a series of outcrops, seismic data, and structures to characterize the spatial geometry of these major faults and their surrounding fractures in detail. Most of these are strike-slip faults, and their subsequent reservoirs can be divided into three categories based on their development, including dendritic, sandwich and slab reservoirs. Recent studies demonstrate that karstic fault reservoirs are most common traps in the study area. Although various types of carbonate karstic fault reservoirs are represented in this region, the dendritic karstic fault reservoir is the most hydrocarbon-rich.Guided by these initial results, 108 wells were drilled from 2013 to 2014, producing 485 thousand tons of oil and yielding success ratios greater than 89%. The average production of dendritic reservoirs is 37.4 tons per day (t/d), while those of sandwich and slab types are 20.2 t/d and 14.0 t/d, respectively. These results represent significant references for future hydrocarbon exploration and the development of similar deeply buried karstic fault reservoirs in the Tarim Basin and elsewhere. 相似文献
13.
莱州湾凹陷位于渤海南部海域,为中生界基底之上发育的新生代半地堑.郯庐断裂带分东西两支穿过莱州湾凹陷东部,在新生代盖层中表现出渤海最复杂最典型的为NNE向的右旋走滑断裂特征.其中东支断裂在渐新世以后活动强烈,发育多条NNE向走滑断层及NE向伴生断层组成的复杂断裂带.走滑断裂带内断层展布符合右旋单剪作用下的脆性走滑剪切模式,地震方差切片存在右旋运动拖拽断裂证据.通过对主断裂活动期次分析表明,研究区主要有三期大的构造活动,同时形成了三期构造反转.应力分布的局域性导致了形变特征的差异性,产生了褶皱、挤压反转、掀斜断块、花状构造等典型的构造类型.研究区首次利用三维地震资料对本区构造特征进行了分析,研究认为走滑活动形成了良好的构造背景、优越的油源及运移等成藏条件,具有较大的油气勘探潜力. 相似文献
14.
15.
Bone Gulf is one of the inter-arm basins of the unusual K-shaped island of Sulawesi. Its age, character and origin are disputed. This study is based on recently acquired 2D seismic lines, seabed multibeam mapping and limited well data, and is linked to stratigraphy on land. The gulf is probably underlain by pre-Neogene volcanogenic, sedimentary, metamorphic and ultramafic rocks, and includes crust of Australian origin. We favour basin initiation in the Miocene rather than Eocene, by extension associated with strike-slip deformation. The main basin trends N–S and is divided into several sub-basins and highs. The highs segment the gulf and their WNW–ESE orientations reflect pre-Neogene basement structures. They are interpreted as strike-slip fault zones active at different times in the Neogene. A southern high was active relatively early, whereas further north there is evidence of young displacements during the Late Neogene. These are visible on the seabed above a high linked to the Kolaka Fault on land. Early basin-bounding faults are oriented NNW–SSE and record extension and strike-slip movements, like the sub-parallel Walanae Fault of South Sulawesi which can be traced offshore into extensional faults bounding the young and narrow Selayar Trough. Sediment in the basins came mainly from the north with contributions from both west and east. Carbonate deposits formed at the margins while deeper marine sediments were deposited in the axial parts of the gulf. An Early Pliocene unconformity can be mapped across the study area marking major uplift of Sulawesi and subsidence of Bone Gulf. This regional event caused major influx of clastic sediments from the north, development of a southward-flowing canyon system, and back-stepping and drowning of carbonates at the basin margins. Hydrocarbons are indicated by seeps, and Bone Gulf has potential sources, reservoirs and seals, but the complex faulting history is a risk. 相似文献
16.
The evolution of the North Aegean Sea is studied through the development of three deep basins: the North Aegean Trough, the North Skyros Basin and the Ikaria Basin. Bathymetric data, a 2D seismic dataset and the well-investigated stratigraphic records of the onshore deep basins of northern Greece and Western Turkey were used to make structural and seismic stratigraphic interpretations. The study area shows two sharp unconformities that correspond to the Eocene-Oligocene transition and the Miocene-Pliocene shift. These discontinuities were used as marker horizons for a more detailed structural and seismic stratigraphic interpretation resulting in the identification of several seismic units. A general seismic signature chart was established using onshore basin stratigraphy and well data, which was then used to constrain the ages of the different seismic units. The main features observed in the basins are interpreted as: 1) trans-tensional growth patterns in Pliocene and Quaternary sediments that combine NE–SW trending and steeply dipping fault zones that likely correspond to strike-slip corridors and E-W/WNW-ESE trending normal faults, 2) regional erosional truncations of Miocene sediments, likely related to the Messinian Salinity Crisis (MSC), 3) thick delta-turbidite deposits of Neogene age. Only the North Aegean Trough shows evidence of earlier development and polyphase deformation through inversion structures, and additional seismic units. Extension processes in the Aegean region have been driven by the Hellenic slab rollback since the middle Eocene. The widespread development of Neogene basins at the whole Aegean scale attests to a major tectonic change due to an acceleration of the trench retreat in the middle Miocene. The present study shows that the Neogene basins of the North Aegean Sea developed in dextral transtension with the northward migration of the associated NE-SW trending strike-slip faults. At regional scale, this tectonic pattern indicates that the westward escape of Anatolia started to interact with the trench retreat in the middle Miocene, around 10 Myr before the arrival of the North Anatolian Fault in the North Aegean Sea. 相似文献
17.
The Cenozoic East African Rift System (EARS) is an exceptional example of active continental extension, providing opportunities for furthering our understanding of hydrocarbon plays within rifts. It is divided into structurally distinct western and eastern branches. The western branch comprises deep rift basins separated by transfer zones, commonly localised onto pre-existing structures, offering good regional scale hydrocarbon traps. At a basin-scale, local discrete inherited structures might also play an important role on fault localisation and hydrocarbon distribution. Here, we consider the evolution of the Central basin of the Malawi Rift, in particular the influence of pre-existing structural fabrics.Integrating basin-scale multichannel 2D, and high resolution seismic datasets we constrain the border, Mlowe-Nkhata, fault system (MNF) to the west of the basin and smaller Mbamba fault (MF) to the east and document their evolution. Intra basin structures define a series of horsts, which initiated as convergent transfers, along the basin axis. The horsts are offset along a NE–SW striking transfer fault parallel to and along strike of the onshore Karoo (Permo-Triassic) Ruhuhu graben. Discrete pre-existing structures probably determined its location and, oriented obliquely to the extension orientation it accommodated predominantly strike-slip deformation, with more slowly accrued dip-slip.To the north of this transfer fault, the overall basin architecture is asymmetric, thickening to the west throughout; while to the south, an initially symmetric graben architecture became increasingly asymmetric in sediment distribution as strain localised onto the western MNF. The presence of the axial horst increasingly focussed sediment supply to the west. As the transfer fault increased its displacement, so this axial supply was interrupted, effectively starving the south-east while ponding sediments between the western horst margin and the transfer fault. This asymmetric bathymetry and partitioned sedimentation continues to the present-day, overprinting the early basin symmetry and configuration. Sediments deposited earlier become increasingly dissected and fault juxtapositions changed at a small (10–100 m) scale. The observed influence of basin-scale transfer faults on sediment dispersal and fault compartmentalization due to pre-existing structures oblique to the extension orientation is relevant to analogous exploration settings. 相似文献
18.
Dong-Lim Choi Han-Joon Kim Hyeong-Tae Jou Seom-Kyu Jeong Yong-Kuk Lee Tae-Hee Lee 《Ocean Science Journal》2013,48(1):59-66
Multi-channel seismic profiles and swath bathymetric data were used to investigate the tectonic evolution of the South Korea Plateau (SKP) associated with the opening of the East Sea (Japan Sea). The SKP is a deformed fragment of continental crust with numerous horsts and sediment-filled grabens. Three sedimentary units in the plateau were identified, which consist of the lower sequence (Unit I) interpreted as syn-rifting deposition during the early to middle Miocene, and the middle and upper sequences (Units II and III) considered as post-rifting deposition since the late Miocene. The fault system in the SKP includes the South Korea Plateau Fault (SKPF) trending NNW-SSE and smaller en echelon normal faults oriented NE-SW. We interpreted the information to postulate that the formation of the SKPF is the result of divergent right-lateral strike-slip movement in the SKP. This study suggests that the dextral movement of the SKP was induced by WSW-ward propagation of the spreading center located in the Japan Basin from the early to middle Miocene times. 相似文献
19.
Christian Tueckmantel Quentin J. Fisher Rob J. Knipe Henry Lickorish Samir M. Khalil 《Marine and Petroleum Geology》2010
A study of normal faults in the Nubian Sandstone Sequence, from the eastern Gulf of Suez rift, has been conducted to investigate the relationship between the microstructure and petrophysical properties of cataclasites developed along seismic-scale faults (slip-surface cataclasites) and smaller displacement faults (deformation bands) found in their damage zones. The results help to quantify the uncertainty associated with predicting the fluid flow behaviour of seismic-scale faults by analysing small faults recovered from core, a common procedure in the petroleum industry. The microstructure of the cataclasites was analysed as well as their single-phase permeability and threshold pressure. Faulting occurred at a maximum burial depth of ∼1.2 km. The permeability of deformation band and slip-surface cataclasites varies over ∼1.5 orders of magnitude for a given fault. Our results suggest that the lowest measured deformation band permeabilities provide a good estimate for the arithmetic-mean permeability of the major slip-surface cataclasites. This is because the cataclastic permeability reduction is mostly established early in the deformation history. Stress at the time of faulting rather than final strain appears to be the critical factor determining fault rock permeability. For viable predictions it is important that the slip-surface cataclasites and deformation bands originate from the same host. On the other hand, a higher uncertainty is associated with threshold pressure predictions, as the arithmetic-mean slip-surface cataclasite threshold pressure exceeds the highest measured deformation band threshold pressure by at least a factor of 4. 相似文献
20.
We studied the active deformation zone of the middle strand of the North Anatolian Fault Zone through the southern part of
the Sea of Marmara by means of high-resolution as well as deep seismic reflection data. Our main objective was to investigate
the active deformation within the uppermost sedimentary layers at high resolution as well as deeper sedimentary layers, focusing
on the tectonic and stratigraphic setting between Gemlik and Bandırma. The middle strand of the North Anatolian Fault reaching
the Gulf of Gemlik is a main fault which has a lazy-S shape in the Gulf of Gemlik, and extends westwards to Bandırma as a
main fault which is an E–W-trending single right-lateral fault controlling the zone along the Gemlik and Bandırma sub-basins.
Small-scale faults, consistent with a dextral shear regime, are present in the vicinity of the main fault. Several oblique
fault groups parallel to the main fault were detected. The deformation in the Gulf of Gemlik is characterized by a series
of synthetic and antithetic faults emanating from the main fault. The boundary faults in the Gulf of Gemlik have a compressive
component, which indicates the sill areas of the gulfs of Gemlik and Bandırma to be push-up structures. Four seismic stratigraphic
units were identified in the sediments of the gulfs of Gemlik and Bandırma, providing evidence of tectonic influence. The
present tectonic structure between Gemlik and Bandırma is not a pull-apart structure. The microseismic study in this area
has shown that fault planes are either strike-slip or compressional, and that the stress tensor is compatible with pure strike-slip
in the E–W fault system. 相似文献