共查询到20条相似文献，搜索用时 875 毫秒
1.
Many surviving ancient monuments are freestanding stone masonry structures, which appear to be vulnerable to horizontal dynamic loads such as earthquakes. However, such structures have stood for thousands of years despite numerous historic earthquakes. This study proposes a scaled-down dynamic centrifuge modelling test to study how these masonry structures resist seismic loading. The test is proposed for seismic risk assessments to evaluate risk of damage from a future seismic event. The seismic behaviour of a 3-storey, freestanding stone block structure has been modelled and tested within a centrifuge. Models were made at 3 different scales and dynamic tests were conducted using different centrifugal acceleration fields so that the behaviours could be transformed to an equivalent full-scale prototype and compared. Data from 2 earthquakes and a sweeping signal were used to simulate the effects of earthquake ground motion within the centrifuge. The acceleration and frequency responses at each storey height of the model were recorded in different centrifugal acceleration fields. Similar behaviours appeared when the results of the small-scale models were transformed to a full-size prototype scale. This confirms that the seismic behaviour of stone masonry structures can be predicted using scaled-down models. 相似文献
2.
3.
Miha Tomaevi
《地震工程与结构动力学》1987,15(6):731-749
The dynamic behaviour of a four-storeyed masonry building model subjected to simulated earthquake loading has been investigated. The observations of damage propagation during shaking tests indicated the storey mechanism action of model building. Since the predominant effect of the first natural mode of vibrations has been also observed, the idea of simple mathematical modelling has been followed in the calculations. Two simple analytical models have been compared when evaluating the dynamic response of the model building: a four degrees of freedom shear system and an equivalent single degree of freedom system. Three hysteresis rules have been taken into account for modelling the non-linear behaviour of the model. Satisfactory correlation between the measured and calculated response has been obtained in most cases. 相似文献
4.
Seismic performance of a three-storey unreinforced masonry building which survived the 1992 Erzincan earthquake without damage is evaluated. Mechanical properties of the masonry walls have been determined experimentally by using identical brick and mortar used in construction. An accurate material model is developed for masonry and employed in a computer program for the non-linear dynamic analysis of masonry buildings. The analytical results based on measured material properties indicated that masonry buildings which satisfy basic seismic code requirements possess remarkable lateral strength, stiffness and energy dissipation capacity. Accordingly, a simple elastic design approach is rendered suitable for unreinforced masonry under seismic excitations, provided that realistic material properties are employed in design. 相似文献
5.
Kolkewadi Dam, a masonry gravity dam in India, is under construction at a'site which was considered to be non-seismic at the time of planning and design. Subsequently, some major and minor earthquake shocks have occurred in the area. In view of the earthquake activity in the region, it was necessary to estimate the seismic resistance of the dam. A dynamic analysis of the two highest monoliths of the dam has been carried out, based on the probable ground motion expected at the site, including a simplified analysis, treating the dam as a cantilever beam and a detailed analysis considering two-dimensional behaviour by the finite element method. It is concluded that the dam will be able to safely withstand the severest shock that has occurred in the region. The behaviour of models of one monolith has also been studied experimentally using a shake table. The experimental behaviour of the models compares favourably with the behaviour obtained theoretically, indicating the applicability of the theoretical method of analysis. 相似文献
6.
The determination of displacement demands for masonry buildings subjected to seismic action is a key issue in the performance-based assessment and design of such structures. A technique for the definition of single-degree-of-freedom (SDOF) nonlinear systems that approximates the global behaviour of multi-degree-of-freedom (MDOF) 3D structural models has been developed in order to provide useful information on the dependency of displacement demand on different seismic intensity measures. The definition of SDOF system properties is based on the dynamic equivalence of the elastic properties (vibration period and viscous damping) and on the comparability with nonlinear hysteretic behaviour obtained by cyclic pushover analysis on MDOF models. The MDOF systems are based on a nonlinear macroelement model that is able to reproduce the in-plane shear and flexural cyclic behaviour of pier and spandrel elements. For the complete MDOF models an equivalent frame modelling technique was used. The equivalent SDOF system was modelled using a suitable nonlinear spring comprised of two macroelements in parallel. This allows for a simple calibration of the hysteretic response of the SDOF by suitably proportioning the contributions of flexure-dominated and shear-dominated responses. The comparison of results in terms of maximum displacements obtained for the SDOF and MDOF systems demonstrates the feasibility and reliability of the proposed approach. The comparisons between MDOF and equivalent SDOF systems, carried out for several building prototypes, were based on the results of time-history analyses performed with a large database of natural records covering a wide range of magnitude, distance and local soil conditions. The use of unscaled natural accelerograms allowed the displacement demand to be expressed as a function of different ground motion parameters allowing for the study of their relative influence on the displacement demand for masonry structures. 相似文献
7.
Seismic upgrading of old masonry buildings by seismic isolation and CFRP laminates: a shaking-table study of reduced scale models 总被引：2，自引：2，他引：0
The efficiency of improving the seismic resistance of old masonry buildings by means of seismic isolation and confining the
structure with CFRP laminate strips has been investigated. Five models of a simple two-story brick masonry building with wooden
floors without wall ties have been tested on the shaking table. The control model has been built directly on the foundation
slab. The second model has been separated from it by a damp-proof course in the form of a PVC sheet placed in the bed-joint
between the second and the third course, whereas the third model has been isolated by rubber isolators placed between the
foundation slab and structural walls. Models four and five have been confined with CFRP laminate strips, simulating the wall
ties placed horizontally and vertically at floor levels and corners of the building, respectively. One of the CFRP strengthened
models has been placed on seismic isolators. Tests have shown that a simple PVC sheet damp-proof course cannot be considered
as seismic isolator unless adequately designed. Tests have also shown that the isolators alone did not prevent the separation
of the walls. However, both models confined with CFRP strips exhibited significantly improved seismic behavior. The models
did not collapse even when subjected to significantly stronger shaking table motion than that resisted by the control model
without wall ties. 相似文献
8.
The evaluation of the out‐of‐plane behaviour of unreinforced walls is one of the most debated topics in the seismic assessment of existing masonry buildings. The discontinuous nature of masonry and its interaction with the remainder of the building make the dynamic modelling of out‐of‐plane response troublesome. In this paper, the results of a shaking table laboratory campaign on a tuff masonry, natural scale, U‐shaped assemblage (façade adjacent to transverse walls) are presented. The tests, excited by scaled natural accelerograms, replicate the behaviour of external walls in existing masonry buildings, from the beginning of rocking motion to overturning. Two approaches have been developed for modelling the out‐of‐plane seismic behaviour: the discrete element method and an SDOF analytic model. Both approaches are shown to be capable of reproducing the experimental behaviour in terms of maximum rotation and time history dynamic response. Finally, test results and numerical time history simulations have been compared with the Italian seismic code assessment procedures. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
9.
提出了带竖向构造钢筋再生混凝土砖砌体结构,进行了2个两层再生混凝土砖砌体房屋结构1/2缩尺模型的模拟地震振动台试验研究,2个结构模型的墙体厚度均为120 mm,一层设有门洞和窗洞,二层设有窗洞。2个模型中,1个为带竖向构造钢筋再生混凝土砖砌体房屋,1个为普通无竖向构造钢筋再生混凝土砖砌体房屋。试验中输入El Centro地震动,测试分析了台面加速度反应、一层和二层顶板加速度反应、结构层间位移反应以及各阶段结构损伤与破坏特征等。研究表明:带竖向构造钢筋再生混凝土砖砌体房屋比普通再生混凝土砖砌体房屋的破坏程度轻,墙体裂缝位置相对错动小,抗震性能显著提高;带竖向构造钢筋再生混凝土砖砌体房屋可用于地震区村镇建筑。 相似文献
10.
11.
砌体建筑群在地震中往往破坏严重损失巨大,合理评估地震作用对不同种类砌体结构造成破坏的风险变得至关重要。传统基于后验概率的地震危险性分析方法忽略了砌体建筑个体差异性的影响,未深入考虑多种震害因子的耦合作用。本文以华南地区砌体建筑群为例,开发了一种集成概率方法来对城市砌体结构的破坏风险进行建模,考虑建筑年代、层数、使用用途和墙厚四类震害因子的耦合影响,采用(Kolmogorov-Smirnov)K-S检验,在设定地震动参数下选取Gaussian分布、Log-Normal分布、Gumbel分布和Beta分布四种概率分布对该地区砌体建筑物的破坏状态概率分布参数进行拟合。通过均方根误差(Root Mean Square Error)RMSE进行拟合优度评价,最终建立基于Gaussian分布和Log-Normal分布的砌体建筑物破坏联合概率模型。最后,以华南地区三个城市典型砌体建筑物为例进行实例对比验证,将基于本文建立的建筑破坏概率模型推算出的砌体建筑群震害矩阵与基于单体结构分析得到的震害矩阵进行对比,与理论值最大偏差为0.033 3。研究表明：本文构建的集成概率方法能够获得更加合理的城市砌体建筑... 相似文献
12.
A high-fidelity PC-based control system has been developed to improve the tracking characteristics of a small-scale seismic motion simulator used for testing structural control designs. This work outlines the development and testing of the control system. First, the simulator hardware is described in detail. The process of constructing a mechanistic model of the system and identifying model parameters is then described. Next, a closed-loop feedback/feed-forward control algorithm, based on an optimal receding horizon formulation, is developed. The control design was tested and the results indicate that the seismic shake table precisely tracked reference seismic motions. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
13.
A pushover-based seismic risk assessment and loss estimation methodology for masonry buildings is introduced. It enables estimation of loss by various performance measures such as the probability of exceeding a designated economic loss, the expected annual loss, and the expected loss given a seismic intensity. The methodology enables the estimation of the economic loss directly from the results of structural analysis, which combines pushover analysis and incremental dynamic analysis of an equivalent SDOF model. The use of the methodology is demonstrated by means of two variants of a three-storey masonry building both of which have the same geometry, but they are built, respectively, from hollow clay masonry (model H) and solid brick masonry (model S). The probability of collapse given the selected design earthquake corresponding to a return period of 475 years was found to be negligible for model H, which indicates the proper behaviour of such a structure when designed according to the current building codes. However, the corresponding probability of collapse of model S was very high (46%). The expected total loss given the design earthquake was estimated to amount to 28 000 € and 290 000 €, respectively, for models H and S. The expected annual loss per 100 m2 of gross floor area was estimated to amount to 75 € and 191 €, respectively, for models H and S. For the presented examples, it was also observed that nonstructural elements contributed more than 50% of the total loss. 相似文献
14.
Displacement capacity of masonry buildings as a basis for the assessment of behavior factor: an experimental study 总被引：3，自引：2，他引：1
The results of shaking table tests of a series of 1:5 scale masonry building models have been used for the assessment of values
of structural behavior factor q for masonry structures, seismic force reduction factors proposed for the calculation of design seismic loads by Eurocode
8, European standard for the design of structures for earthquake resistance. Six models have been tested, representing prototype
buildings of two different structural configurations and built with two different types of masonry materials. The study indicated
that the reduction of seismic forces for the design depends not only on the type of masonry construction system, but also
on structural configuration and mechanical characteristics of masonry materials. It has been also shown that besides displacement
and energy dissipation capacity, damage limitation requirement should be taken into account when evaluating the values of
behavior factor. On the basis of analysis of experimental results a conclusion can be made, that the values at the upper limit
of the proposed range of values of structural behavior factor q for unreinforced and confined masonry construction systems are adequate, if pushover methods are used and the calculated
global ductility of the structure is compared with the displacement demand. In the case where elastic analysis methods are
used and significant overstrength is expected, the proposed values are conservative. However, additional research and parametric
studies are needed to propose the modifications. 相似文献
15.
组合墙结构房屋抗震性能的振动台试验研究 总被引：1，自引：0，他引：1
通过三个组合墙模型房屋的振动台试验，分析了组合墙结构体系房屋的动力性能和抗震能力，比较了底一层和底两层框架组合墙房屋和普通组合墙房屋的抗震性能。结果表明，八层组合墙房屋的抗震能力远远超过设计能力，可用于八度地区，底框架组合墙房屋的抗震性能优于普通组合墙房屋，底两层框架组合墙房屋也优于底一层框架组合墙房屋。 相似文献
16.
Seismic assessment of existing unreinforced masonry buildings represents a current challenge in structural engineering. Many historical masonry buildings in earthquake regions were not designed to withstand seismic loading; thus, these structures often do not meet the basic safety requirements recommended by current seismic codes and need to be strengthened considering the results from realistic structural analysis. This paper presents an efficient modelling strategy for representing the nonlinear response of unreinforced masonry components under in‐plane cyclic loading, which can be used for practical and accurate seismic assessment of masonry buildings. According to the proposed strategy, generic masonry perforated walls are modelled using an equivalent frame approach, where each masonry component is described utilising multi‐spring nonlinear elements connected by rigid links. When modelling piers and spandrels, nonlinear springs are placed at the two ends of the masonry element for describing the flexural behaviour and in the middle for representing the response in shear. Specific hysteretic rules allowing for degradation of stiffness and strength are then used for modelling the member response under cyclic loading. The accuracy and the significant potential of the proposed modelling approach are shown in several numerical examples, including comparisons against experimental results and the nonlinear dynamic analysis of a building structure. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
17.
Charalambos Mouzakis Chrissy-Elpida Adami Lucia Karapitta Elizabeth Vintzileou 《Bulletin of Earthquake Engineering》2018,16(2):803-829
The present work focuses on the seismic behaviour of timber-laced masonry buildings with timber floors, before and after the application of intervention techniques. A two-storey building with timber ties (scale 1:2) was subjected to biaxial seismic actions. Prior to the execution of shaking table tests, the dynamic characteristics of the model were identified. The base acceleration was increased step-wise until the occurrence of significant but repairable damages. Afterwards, the masonry was strengthened by means of grouting, whereas the diaphragm action of the top floor of the building was enhanced and the model was re-tested. The tests on the timber reinforced model before strengthening show that the presence of timber ties within the masonry elements contributes to improved seismic behaviour. The performance of the model after strengthening shows that the selected intervention techniques led to a significant improvement of the seismic behaviour of the building model. 相似文献
18.
The aim of this paper is to adjust behaviour models for each class of structure for vulnerability assessment by using ambient vibration. A simple model based on frequencies, mode shapes and damping, taken from ambient vibrations, allows computation of the response of the structures and comparison of inter‐storey drifts with the limits found in the literature for the slight damage grade, considered here as the limit of elastic behaviour. Two complete methodologies for building fragility curves are proposed: (1) using a multi‐degree of freedom system including higher modes and full seismic ground‐motion and (2) using a single‐degree of freedom model considering the fundamental mode f0 of the structure and ground‐motion displacement response spectra SD(f0). These two methods were applied to the city of Grenoble, where 60 buildings were studied. Fragility curves for slight damage were derived for the various masonry and reinforced concrete classes of buildings. A site‐specific earthquake scenario, taking into account local site conditions, was considered, corresponding to an ML = 5.5 earthquake at a distance of 15 km. The results show the benefits of using experimental models to reduce variability of the slight damage fragility curve. Moreover, by introducing the experimental modal model of the buildings, it is possible to improve seismic risk assessment at an overall scale (the city) or a local scale (the building) for the first damage grade (slight damage). This level of damage, of great interest for moderate seismic‐prone regions, may contribute to the seismic loss assessment. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
19.
汶川8.0级特大地震发生时,前山断裂从彭州市白鹿中学两栋教学楼中间穿过,断层距离两栋教学楼仅数米,造成前楼严重破坏,破坏现象非常典型。该结构为外廊式单跨约束砌体结构教学楼,抗震设防烈度为7度,承重墙体的构造特点有别于当地的普通砌体结构,本文采用现场测试、震害考察和弹塑性地震反应计算分析等手段对该结构的抗震性能进行了详细的研究,旨在揭示具有这类构造形式的砌体结构在不同烈度影响场下的破坏特点和抗震能力,为指导今后砌体结构的设计和抗震规范的修改提供参考。 相似文献
20.
带裙房高层建筑地震反应控制振动台试验研究 总被引：1，自引：1，他引：0
2002年9月在香港理工大学成功地进行了带裙房高层建筑地震反应控制试验研究。设计和制作的结构模型是带3层裙房的12层高楼剪切模型,在裙房顶层与主楼之间安装单MR阻尼器形成MR阻尼器耦联结构模型。MR阻尼器采用美国LORD公司摩擦型MR阻尼器,并且选用其配套产品计算机电流控制器对其进行控制,控制系统采用德国dSPACE公司实时控制系统。对独立主楼、独立裙房和原结构模型的动力特性进行了辨识;对结构模型进行了El Centro地震动作用下的地震反应振动台试验;以作者提出的MR阻尼器半主动逻辑控制算法,对MR阻尼器耦联的结构模型进行了地震反应振动台试验。试验结果表明：用MR阻尼器耦联主楼与裙房,采用半主动逻辑控制方法进行控制,能有效抑制主楼的鞭梢效应并使主楼和裙房的地震反应减小。 相似文献