首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 406 毫秒
1.
A probabilistic seismic hazard analysis (PSHA) was conducted to establish the hazard spectra for a site located at Dubai Creek on the west coast of the United Arab Emirates (UAE). The PSHA considered all the seismogenic sources that affect the site, including plate boundaries such as the Makran subduction zone, the Zagros fold-thrust region and the transition fault system between them; and local crustal faults in UAE. PSHA indicated that local faults dominate the hazard. The peak ground acceleration (PGA) for the 475-year return period spectrum is 0.17 g and 0.33 g for the 2,475-year return period spectrum. The hazard spectra are then employed to establish rock ground motions using the spectral matching technique.  相似文献   

2.
In performance-based seismic design, as adopted by several building codes worldwide, the structural performance is verified against ground motions that have predetermined exceedance return periods at the site of interest. Such a return period is evaluated by means of probabilistic seismic hazard analysis (PSHA), and the corresponding ground motion is often represented by the uniform hazard spectrum (UHS). The structural performance for ground motions larger than those considered in this design approach is, typically, not explicitly controlled under the assumption that they are sufficiently rare. On one hand, this does not achieve uniform safety at sites characterized by different design ground motions corresponding to the same return period; on the other hand, exceedances of the design spectra are systematically observed over large areas, for example in Italy. The latter issue is because of the nature of UHS, the exceedance of which is likely-to-almost-certain when the construction site is in the epicentral area of moderate-to-high magnitude earthquakes (ie, the design spectrum may be not conservative at these locations), especially if PSHA is based on seismic source zones. The former is partially because of the systematic difference of ground motions for return periods larger than the design one at the different sites. Quantification of the expected ground motion given the exceedance of the design ground motions (ie, the recently introduced as the expected peak-over-threshold or POT) can be of help in quantitatively assessing these issues. In the study, a procedure to compute the POT distribution is derived first; second, POT spectra are introduced and used to help understanding why and how seismic structural reliability of code-conforming structures decreases as the seismic hazard of the site increases; third, expected and 95th percentile POT maps are shown for Italy to discuss how much high hazard sites are exposed to much larger peak-over-threshold with respect to mid-hazard and low-hazard sites; finally the POT is discussed with respect to the slope of the hazard curve (in log-log scale) at the threshold, a known proxy for ground motion beyond design. All data presented in the maps are made available for the interested reader as a supplemental archive.  相似文献   

3.
A seismic hazard assessment study of continental Ecuador is presented in this paper. The study begins with a revision of the available information on seismic events and the elaboration of a seismic catalog homogenized to magnitude Mw. Different seismic source definitions are revised and a new area-source model, based on geological and seismic data, is proposed. The available ground motion prediction equations for crustal and subduction sources are analyzed and selected for the tectonic environments observed in Ecuador. A probabilistic seismic hazard assessment approach is carried out to evaluate the exceedance probability of several levels of peak ground acceleration PGA and spectral accelerations SA (T) for periods (T) of 0.1, 0.2, 0.5, 1 and 2s. The resulting hazard maps for continental Ecuador are presented, together with the uniform hazard spectra of four province capital cities. Hazard disaggregation is carried out for target motions defined by the PGA values and SA (1s) expected for return periods of 475 and 2475 years, providing estimates for short-period and long-period controlling earthquakes.  相似文献   

4.
Ground-Motion Hazard Values for Northern Algeria   总被引：2，自引：0，他引：2  
This study examines distinctive features of ground motion parameters in northern Algeria. An initial computation of seismic hazard in terms of horizontal peak ground acceleration (PGA) and spectral acceleration (SA) at different periods, damped at 5%, is carried out for three different types of soils (rock, stiff soils and soft soils) for return periods of 100 and 475 years. In addition, uniform hazard spectra (UHS) are computed for these two return periods at several locations in the region. Then, the UHS computed for different soil types are proposed as a starting point to define elastic design spectra for building-code purposes. We have used the well-known Newmark-Hall approach. As proposed in the most recent International Building Codes, the SA (0.2 s) value is used to establish the spectral region for lower periods (region controlled by acceleration), whereas the SA (1.0 s) value is used to establish the spectral region for intermediate periods (region controlled by velocity). We also obtained important relations, dependent on site condition, between SA (0.2 s), SA (1.0 s) or SAmax values, and the PGA, for both return periods of 100 and 475 years. Other relationships between PGA or SAmax values have also been derived for return periods of 100 and 475 years, in this case independent of site condition.  相似文献   

5.
Probabilistic seismic hazard analysis (PSHA) was performed to determine two alternate magnitude-distance combinations for the 475 yr event, and the worst-case scenario event in Perth, Western Australia. Regional strong ground motion (SGM) time histories on rock sites are used to modify an eastern North America (ENA) seismic model to suit southwest Western Australian (SWWA) conditions. This model is then used to stochastically simulate a set of 475 yr design events and a set of worst-case scenario event for rock sites in the Perth metropolitan area (PMA). The simulated time histories are then used as input to typical soft soil sites in the PMA to estimate surface ground motions. The spectral accelerations of the ground motions on rock and soil sites are calculated and compared with the corresponding design spectra defined in current and previous Australian earthquake loading code. Discussions of the adequacy of the code spectra and the differences to ours, along with implications on structural response and damage are made.  相似文献   

6.
Deterministic and probabilistic seismic hazard analyses should be complementary, in the sense that probabilistic analysis may be used to identify the controlling deterministic design‐level earthquake events, and more sophisticated models of these events may then be developed to account for uncertainties that could not have been included directly in the probabilistic analysis. De‐aggregation of the tentative uniform hazard spectra (UHS) in Hong Kong resulting from a probabilistic seismic hazard assessment (PSHA) indicates that strong and major distant earthquakes, rather than moderate local earthquakes, make the largest contribution to the seismic hazard level within the natural‐period range longer than 0.3 s. Ground‐motion simulations of controlling events located 90 and 340 km from Hong Kong, taking into account uncertainties in the rupture process, reveal that the tentative UHS resulting from the PSHA may have significantly underestimated the mid‐to‐long period components. This is attributed mainly to the adoption of double‐corner source‐spectrum models in the attenuation relationships employed in the PSHA. The results of the simulations indicate clearly that rupture directivity and rupture velocity can significantly affect the characteristics of ground motions, even from such distant earthquakes. The rupture‐directivity effects have profound implications in elongating the second corner period where the constant velocity intersects the constant displacement, thus increasing the associated displacement demand. However, demands for acceleration and velocity are found to be not sensitive to the presence of the directivity pulses. Ground pulses resulting from forward rupture directivity of distant earthquakes have longer predominant periods than the usual near‐fault directivity pulses. These long‐period pulses may have profound implications for metropolises, such as Hong Kong and others in Southeast Asia, having large concentration of high‐rise buildings. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

7.
This research focuses on the evaluation of soil conditions for seismic stations in southern and eastern Romania, their influence on stochastic finite-fault simulations, and the impact of using them on the seismic hazard assessment. First, the horizontal-to-vertical spectral ratios (HVSR) are evaluated using ground motions recorded in 32 seismic stations during small magnitude (M W  ≤ 6.0) Vrancea seismic events. Most of the seismic stations situated in the southern part of Romania exhibit multiple HVSR peaks over a broad period range. However, only the seismic stations in the eastern-most part of Romania have clear short-period predominant periods. Subsequently, stochastic finite-fault simulations are performed in order to evaluate the influence of the soil conditions on the ground motion amplitudes. The analyses show that the earthquake magnitude has a larger influence on the computed ground motion amplitudes for the short- and medium-period range, while the longer-period spectral ordinates tend to be influenced more by the soil conditions. Next, the impact of the previously evaluated soil conditions on the seismic hazard results for Romania is also investigated. The results reveal a significant impact of the soil conditions on the seismic hazard levels, especially for the sites characterized by long-period amplifications (sites situated mostly in southern Romania), and a less significant influence in the case of sites which have clear short predominant periods.  相似文献   

8.
Local site conditions can significantly influence the characteristics of seismic ground motions. In this study, site response analyses using one-dimensional linear elastic (LE), equivalent-linear (EQL) and nonlinear (NL) approaches are performed at different seismic hazard levels of Singapore. Two seismic stations, namely, the KAP and BES stations located at soft soil sites, are selected from the national network of Singapore. Firstly, site response estimates using the LE, EQL (SHAKE04) and NL (DEEPSOIL) approaches are compared with the borehole recordings. Results show favorable matches between the predictions and the observations at the KAP site, while under-predictions are observed for all the three site effect approaches at the BES site. Secondly, the applicability of the LE, EQL and NL models is examined at different hazard levels of Singapore. It is found that for the hazard level at a return period of 475 years, the computed maximum strain (γmax) is 0.06% and then the EQL model can provide accurate site response predictions. However, for the hazard level at a return period of 2475 years, the calculated γmax is larger than 2%, resulting in notable differences in the predictions of different site response models. This study highlights the importance of site effects in seismic hazard analysis of Singapore.  相似文献   

9.
In a companion paper, an overview and problem definition was presented for ground motion selection on the basis of the conditional spectrum (CS), to perform risk‐based assessments (which estimate the annual rate of exceeding a specified structural response amplitude) for a 20‐story reinforced concrete frame structure. Here, the methodology is repeated for intensity‐based assessments (which estimate structural response for ground motions with a specified intensity level) to determine the effect of conditioning period. Additionally, intensity‐based and risk‐based assessments are evaluated for two other possible target spectra, specifically the uniform hazard spectrum (UHS) and the conditional mean spectrum (CMS, without variability).It is demonstrated for the structure considered that the choice of conditioning period in the CS can substantially impact structural response estimates in an intensity‐based assessment. When used for intensity‐based assessments, the UHS typically results in equal or higher median estimates of structural response than the CS; the CMS results in similar median estimates of structural response compared with the CS but exhibits lower dispersion because of the omission of variability. The choice of target spectrum is then evaluated for risk‐based assessments, showing that the UHS results in overestimation of structural response hazard, whereas the CMS results in underestimation. Additional analyses are completed for other structures to confirm the generality of the conclusions here. These findings have potentially important implications both for the intensity‐based seismic assessments using the CS in future building codes and the risk‐based seismic assessments typically used in performance‐based earthquake engineering applications. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

10.
An approach that relates results from a regional seismic hazard assessment study with local-scale site-effect characterizations in an area of low-to-moderate seismic activity such as Andalusia (southern Spain), is presented. Results of a previous probabilistic seismic hazard analysis of Andalusia on rock conditions are disaggregated to infer hazard controlling earthquakes for different target motions. A collection of controlling magnitude-distance pairs and the corresponding site-specific response spectra at main capital cities of the region are obtained. These spectra are first-order approximations to expected seismic actions required in local earthquake risk assessments. In addition, results of independent, local-scale studies developed in Almeria City (SE Andalusia) are used to derive an updated seismic zonation of the city. These include predominant soil period estimates and shear-wave velocity profiles at different locations. If a local seismic risk assessment study or an earthquake-resistant structural design is to be developed, it may be recommended the use of different seismic actions on sites characterized by distinct response to seismic shaking (as derived from the seismic zonation). The seismic action related to worst-case scenarios may be modeled through a hazard-consistent response spectrum, obtained by hazard disaggregation at the spectral acceleration with period matching the prevailing resonant period of the target site or structure.  相似文献   

11.
Mexico City high plasticity clays exhibit a small degree of nonlinearity for shear strains as large as 0.1%, which leads to both moderate shear stiffness degradation and small to medium damping increment, even for long duration subduction strong ground motions, such as the 8.1Mw 1985Michoacan earthquake. Nonetheless, current seismic design criteria of strategic infrastructure used worldwide have striven for having larger return periods for establishing the seismic environment, considering recent large magnitude (M>8.5Mw) events. This paper presents the study of the seismic response of typical high plasticity clays found in the so-called Texcoco Lake, in the surrounding of Mexico City valley, for larger to extreme earthquakes. The shear wave velocity profile was characterized using a down-hole test. The seismic environment was established from a set of uniform hazard response spectra developed for a nearby rock outcrop for return periods of 125, 250, 475 and 2475 years. A time-domain spectral matching was used to develop acceleration time histories compatible with each uniform hazard response spectrum. Both frequency and time domain site response analyses were carried out considering each seismic scenario. Ground nonlinearities were clearly observed in the soil response during extreme ground shaken, which increases rapidly with the return period. This fact must be taken into account to avoid costly and potentially unsafe seismic designs.  相似文献   

12.
A probabilistic seismic hazard assessment of Andalusia (Southern Spain) in terms of peak ground acceleration, PGA, and spectral accelerations, SA(T), is presented in this paper. In contrast to most of the previous studies in the region, which were performed for PGA, making use of Intensity-to-PGA relationships, hazard was here calculated in terms of magnitude, using published spectral ground-motion models. Moreover, we considered different ground-motion models for the Atlantic sources, since the attenuation of those motions seems to be slower, as evidenced in the case of the extensive macroseismic areas of earthquakes like those occurred in the years 1755, 1969 and 2007. A comprehensive review of the seismic catalogue and of the seismogenic models proposed for the region was carried out, including those for Northern Africa, which is part of the influence area. Hazard calculations were performed following the Probabilistic Seismic Hazard Assessment (PSHA) methodology using a logic tree, which accounts for six different seismic source zonings and five different ground-motion attenuation relationships. Hazard maps in terms of PGA and SA (0.2 s) and SA (1 s) and coefficient of variation (COV) maps, for the 475-year return period were first obtained in rock sites. A geotechnical classification and amplification factors were proposed and new hazard maps including local effects were represented, showing PGA values ranging from 24 to 370 cm/s2 for the whole Andalusian territory, with the highest expected values (PGA > 300 cm/s2) in some parts of the Granada Province and in the town of Vélez Málaga. Lowest values (PGA < 50 cm/s2) correspond to some towns of the Huelva and Córdoba provinces. The inclusion of soil effects provides a more detailed picture of the actual hazard the region is subjected to.  相似文献   

13.
Egypt is located in the northeastern corner of Africa within a sensitive seismotectonic location. Earthquakes are concentrated along the active tectonic boundaries of African, Eurasian, and Arabian plates. The study area is characterized by northward increasing sediment thickness leading to more damage to structures in the north due to multiple reflections of seismic waves. Unfortunately, man-made constructions in Egypt were not designed to resist earthquake ground motions. So, it is important to evaluate the seismic hazard to reduce social and economic losses and preserve lives. The probabilistic seismic hazard assessment is used to evaluate the hazard using alternative seismotectonic models within a logic tree framework. Alternate seismotectonic models, magnitude-frequency relations, and various indigenous attenuation relationships were amended within a logic tree formulation to compute and develop the regional exposure on a set of hazard maps. Hazard contour maps are constructed for peak ground acceleration as well as 0.1-, 0.2-, 0.5-, 1-, and 2-s spectral periods for 100 and 475 years return periods for ground motion on rock. The results illustrate that Egypt is characterized by very low to high seismic activity grading from the west to the eastern part of the country. The uniform hazard spectra are estimated at some important cities distributed allover Egypt. The deaggregation of seismic hazard is estimated at some cities to identify the scenario events that contribute to a selected seismic hazard level. The results of this study can be used in seismic microzonation, risk mitigation, and earthquake engineering purposes.  相似文献   

14.
Izmir, the third largest city and one of the major economic centers in Turkey, has more than three million residents and one-half million buildings. The city, located in a seismically active region in western Anatolia, was a subject of the 1997 RADIUS (Risk Assessment Tools for Diagnosis of Urban Areas against Seismic Disaster) project. In this paper, the seismic hazard of Izmir is investigated through probabilistic seismic hazard assessment. First, the seismic setting of Izmir is presented. Considering the statistics of earthquakes that took place in the region during the period 1900–2005, a simple seismic hazard model is used to facilitate the assessment. To account for modeling uncertainties associated with the values of seismicity parameters, a logic tree procedure is employed in carrying out the seismic hazard computations. The resulting weighted average seismic hazard, presented in terms of peak ground acceleration and associated probability of exceedence, could be considered the “best estimate” of seismic hazard for Izmir. Accordingly, for a return period of 475 years, for rock sites, a PGA value of 0.34 g is calculated. This PGA hazard estimate is close to the current code-recommended design acceleration level for Izmir.  相似文献   

15.
A unified probabilistic seismic hazard assessment (PSHA) for the Pyrenean region has been performed by an international team composed of experts from Spain and France during the Interreg IIIA ISARD project. It is motivated by incoherencies between the seismic hazard zonations of the design codes of France and Spain and by the need for input data to be used to define earthquake scenarios. A great effort was invested in the homogenisation of the input data. All existing seismic data are collected in a database and lead to a unified catalogue using a local magnitude scale. PSHA has been performed using logic trees combined with Monte Carlo simulations to account for both epistemic and aleatory uncertainties. As an alternative to hazard calculation based on seismic sources zone models, a zoneless method is also used to produce a hazard map less dependant on zone boundaries. Two seismogenic source models were defined to take into account the different interpretations existing among specialists. A new regional ground-motion prediction equation based on regional data has been proposed. It was used in combination with published ground-motion prediction equations derived using European and Mediterranean data. The application of this methodology leads to the definition of seismic hazard maps for 475- and 1,975-year return periods for spectral accelerations at periods of 0 (corresponding to peak ground acceleration), 0.1, 0.3, 0.6, 1 and 2 s. Median and percentiles 15% and 85% acceleration contour lines are represented. Finally, the seismic catalogue is used to produce a map of the maximum acceleration expected for comparison with the probabilistic hazard maps. The hazard maps are produced using a grid of 0.1°. The results obtained may be useful for civil protection and risk prevention purposes in France, Spain and Andorra.  相似文献   

16.
Located on the Alpine-Himalayan earthquake belt, Iran is one of the seismically active regions of the world. Northern Iran, south of Caspian Basin, a hazardous subduction zone, is a densely populated and developing area of the country. Historical and instrumental documented seismicity indicates the occurrence of severe earthquakes leading to many deaths and large losses in the region. With growth of seismological and tectonic data, updated seismic hazard assessment is a worthwhile issue in emergency management programs and long-term developing plans in urban and rural areas of this region. In the present study, being armed with up-to-date information required for seismic hazard assessment including geological data and active tectonic setting for thorough investigation of the active and potential seismogenic sources, and historical and instrumental events for compiling the earthquake catalogue, probabilistic seismic hazard assessment is carried out for the region using three recent ground motion prediction equations. The logic tree method is utilized to capture epistemic uncertainty of the seismic hazard assessment in delineation of the seismic sources and selection of attenuation relations. The results are compared to a recent practice in code-prescribed seismic hazard of the region and are discussed in detail to explore their variation in each branch of logic tree approach. Also, seismic hazard maps of peak ground acceleration in rock site for 475- and 2,475-year return periods are provided for the region.  相似文献   

17.
A probabilistic seismic hazard assessment of the Province of Murcia in terms of peak ground acceleration (PGA) and spectral accelerations [SA(T)] is presented in this paper. In contrast to most of the previous studies in the region, which were performed for PGA making use of intensity-to-PGA relationships, hazard is here calculated in terms of magnitude and using European spectral ground-motion models. Moreover, we have considered the most important faults in the region as specific seismic sources, and also comprehensively reviewed the earthquake catalogue. Hazard calculations are performed following the Probabilistic Seismic Hazard Assessment (PSHA) methodology using a logic tree, which accounts for three different seismic source zonings and three different ground-motion models. Hazard maps in terms of PGA and SA(0.1, 0.2, 0.5, 1.0 and 2.0 s) and coefficient of variation (COV) for the 475-year return period are shown. Subsequent analysis is focused on three sites of the province, namely, the cities of Murcia, Lorca and Cartagena, which are important industrial and tourism centres. Results at these sites have been analysed to evaluate the influence of the different input options. The most important factor affecting the results is the choice of the attenuation relationship, whereas the influence of the selected seismic source zonings appears strongly site dependant. Finally, we have performed an analysis of source contribution to hazard at each of these cities to provide preliminary guidance in devising specific risk scenarios. We have found that local source zones control the hazard for PGA and SA(T ≤ 1.0 s), although contribution from specific fault sources and long-distance north Algerian sources becomes significant from SA(0.5 s) onwards.  相似文献   

18.
The characterisation of the seismic hazard input is a critical element of any seismic design code, not only in terms of the absolute levels of ground motion considered but also of the shape of the design spectrum. In the case of Europe, future revisions of the seismic design provisions, both at a national and a pan‐European level, may implement considerable modifications to the existing provisions in light of recent seismic hazard models, such as the 2013 European Seismic Hazard Model. Constraint of the shape of the long‐period design spectrum from seismic hazard estimates on such a scale has not been possible, however, owing to the limited spectral period range of existing ground motion models. Building upon recent developments in ground motion modelling, the 2013 European Seismic Hazard Model is adapted here with a new ground motion logic tree to provide a broadband Probabilistic Seismic Hazard Analysis for rock sites across a spectral period range from 0.05 seconds to 10.0 seconds. The resulting uniform hazard spectra (UHS) are compared against existing results for European and broadband Probabilistic Seismic Hazard Analysis and against a proposed formulation of a generalised design spectrum in which controlling parameters can be optimised to best fit the uniform hazard spectra in order to demonstrate their variability on a European scale. Significant variations in the controlling parameters of the design spectrum are seen both across and within stable and active regions. These trends can help guide recalibrations of the code spectra in future revisions to seismic design codes, particularly for the longer‐period displacement spectrum.  相似文献   

19.
The accurate evaluation and appropriate treatment of uncertainties is of primary importance in modern probabilistic seismic hazard assessment (PSHA). One of the objectives of the SIGMA project was to establish a framework to improve knowledge and data on two target regions characterized by low-to-moderate seismic activity. In this paper, for South-Eastern France, we present the final PSHA performed within the SIGMA project. A new earthquake catalogue for France covering instrumental and historical periods was used for the calculation of the magnitude-frequency distributions. The hazard model incorporates area sources, smoothed seismicity and a 3D faults model. A set of recently developed ground motion prediction equations (GMPEs) from global and regional data, evaluated as adequately representing the ground motion characteristics in the region, was used to calculate the hazard. The magnitude-frequency distributions, maximum magnitude, faults slip rate and style-of-faulting are considered as additional source of epistemic uncertainties. The hazard results for generic rock condition (Vs30 = 800 m/s) are displayed for 20 sites in terms of uniform hazard spectra at two return periods (475 years and 10,000 years). The contributions of the epistemic uncertainties in the ground motion characterizations and in the seismic source characterization to the total hazard uncertainties are analyzed. Finally, we compare the results with existing models developed at national scale in the framework of the first generation of models supporting the Eurocode 8 enforcement, (MEDD 2002 and AFPS06) and at the European scale (within the SHARE project), highlighting significant discrepancies at short return periods.  相似文献   

20.
This paper aims at implementing and introducing the use of conditional mean spectrum (CMS) and conditional spectrum (CS) as the main input parameters in the practice of seismic safety evaluation (SSE) in China, instead of the currently used uniform hazard spectrum (UHS). For this purpose, a procedure for M-R-epsilon seismic hazard deaggregation in China was first developed. For illustration purposes, two different typical sites in China, with one to two dominant seismic zones, were considered as examples to carry out seismic hazard deaggregation and illustrate the construction of CMS/CS. Two types of correlation coefficients were used to generate CMS and the results were compared over a vibration period range of interest. Ground motion records were selected from the NSMONS (2007–2015) and PEER NGA-West2 databases to correspond to the target CMS and CS. Hazard consistency of the spectral accelerations of the selected ground motion records was evaluated and validated by computing the annual exceedance probability rate of the response spectra and comparing the results to the hazard curve corresponding to each site of concern at different periods. The tools developed in this work and their illustrative application to specific case studies in China are a first step towards the adoption of CMS and CS into the practice of seismic safety evaluation in this country.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号