共查询到20条相似文献，搜索用时 31 毫秒
1.
M. J. Selby 《地球表面变化过程与地形》1982,7(5):449-467
In identifying controls on rock slope form a distinction is made between: (1) rock slopes with joints which dip steeply out of a cliff and hence are subject to mass failure of the rock mass above a critical joint; and (2) rock slopes with inclinations which are either in equilibrium with the mass strength of their rocks, or have profiles which will develop towards strength equilibrium as cross joints open. In the first class of slope, stability results not just from the basic frictional resistance of the rock but also from the frictional roughness along the critical joint and from the normal stress acting across that joint. Stability may be reduced by weathering and loss of strength of the joint wall rock. As a result of normal stress variations with depth, induced by overburdens, high cliffs which are not undercut have a concave profile. The second group of slopes includes those with inclinations controlled at the scale of individual joint blocks, buttressed slopes and those on unjointed rock masses. Buttressed and unjointed rock masses develop towards a condition of mass strength equilibrium as cross joints open. Strength equilibrium slopes may be recognized by application of a rock mass strength classification proposed for geomorphic purposes. Eleven propositions are formulated which identify controls on rock slope development and some consequences of these controls. 相似文献
2.
Frank Ahnert 《地球表面变化过程与地形》1987,12(1):3-15
The model SLOP3D is used to identify characteristic aspects of slope development under different conditions. A series of slopes along the Kall valley in the northern Eifel is reproduced by a developmental sequence of model slopes. The spatial and temporal variations of the components of slope development systems (relief, slope form, weathering rates, denudation rates) are discussed by means of mass movement and wash denudation models. The negative feedbacks between system components create a tendency towards the establishment of a dynamic equilibrium which is reached, however, only if the endogenic and exogenic conditions remain constant for the required relaxation time. The latter is shown to be a function of slope length, of the rate of uplift, of the denudational process type, and of the intensity of exogenic inputs (e.g. precipitation). Varying rock resistance leads to the development of shield inselbergs only if the rate of denudation becomes higher than the maximum possible weathering rate of the resistant bedrock. 相似文献
3.
Different mountain shapes in sedimentary sequences in the Canadian Rockies were enhanced by glacial erosion and have been modified postglacially by gravity-driven slope processes. Slope modification by both glacial erosion and postglaciation landslides is related to rock structure, particularly bedding dip, rock mass strength and slope geometry. Five mountain peak shapes in monoclinal sequences each fall into different ranges of bedding dips. Castellate (1) and matterhorn (2) mountains occur in sub-horizontal beds and their slopes on all sides follow combinations of bedding planes and joints. The overall slopes are generally 37 to 65° and oblique to both bedding and joints. Slopes in sub-horizontal beds may be controlled by their rock mass strength. Cuestas (3) develop in gently to moderately dipping beds. Dip slopes and steeper, normal escarpments form their cataclinal and anaclinal sides respectively, with the dihedral angle between them about 90°. Hogbacks (4) in moderately to steeply dipping beds have similar slope angles on both cataclinal and anaclinal slopes. Cataclinal slopes are either dip slopes or underdip slopes but anaclinal slopes are often steepened escarpments; the dihedral angle between the slopes is usually less than 90°. Dogtooth (5) mountains occur in steeply dipping to sub-vertical beds and the dihedral angle can be as low as 60°. Slope gradients in inclined beds are closely related to landslides, whose modes are controlled by bedding dips. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
4.
Matthias Benjamin Siewert Michael Krautblatter Hanne Hvidtfeldt Christiansen Markus Eckerstorfer 《地球表面变化过程与地形》2012,37(14):1542-1555
Holocene rockwall retreat rates quantify integral values of rock slope erosion and talus cone evolution. Here we investigate Holocene rockwall retreat of exposed arctic sandstone cliffs in Longyeardalen, central Svalbard and apply laboratory‐calibrated electrical resistivity tomography (ERT) to determine talus sediment thickness. Temperature–resistivity functions of two sandstone samples are measured in the laboratory and compared with borehole temperatures from the talus slope. The resistivity of the higher and lower‐porosity sandstone at relevant borehole permafrost temperatures defines a threshold range that accounts for the lithological variability of the dominant bedrock and debris material. This helps to estimate the depth of the transition from higher resistivities of ice‐rich debris to lower resistivities of frozen bedrock in the six ERT transects. The depth of the debris–bedrock transition in ERT profiles is confirmed by a pronounced apparent resistivity gradient in the raw data plotted versus depth of investigation. High‐resolution LiDAR‐scanning and ERT subsurface information were collated in a GIS to interpolate the bedrock surface and to calculate the sediment volume of the talus cones. The resulting volumes were referenced to source areas to calculate rockwall retreat rates. The rock mass strength was estimated for the source areas. The integral rockwall retreat rates range from 0.33 to 1.96 mm yr–1, and are among the highest rockwall retreat rates measured in arctic environments, presumably modulated by harsh environmental forcing on a porous sandstone rock cliff with a comparatively low rock mass strength. Here, we show the potential of laboratory‐calibrated ERT to provide accurate estimates of rockwall retreat rates even in ice‐rich permafrost talus slopes. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
5.
B. P. Moon 《地球表面变化过程与地形》1984,9(2):189-193
Use of a field technique recently devised by Selby for the measurement of rock mass strength has resulted in the understanding of the relationship between rock mass strength and slope form. It is suggested that the accuracy of rock mass strength assessments may be enhanced by further subdividing the rating scales for intact rock strength and the spacing of partings. The relationship between rock mass strength and gradient is reformulated using southern African data, and statistically based confidence limits for identifying strength equilibrium slopes are proposed. 相似文献
6.
Jeffrey R. Moore Johnny W. Sanders William E. Dietrich Steven D. Glaser 《地球表面变化过程与地形》2009,34(10):1339-1352
Collapse of cliff faces by rockfall is a primary mode of bedrock erosion in alpine environments and exerts a first‐order control on the morphologic development of these landscapes. In this work we investigate the influence of rock mass strength on the retreat rate of alpine cliffs. To quantify rockwall competence we employed the Slope Mass Rating (SMR) geomechanical strength index, a metric that combines numerous factors contributing to the strength of a rock mass. The magnitude of cliff retreat was calculated by estimating the volume of talus at the toe of each rockwall and projecting that material back on to the cliff face, while accounting for the loss of production area as talus buries the base of the wall. Selecting sites within basins swept clean by advancing Last Glacial Maximum (LGM) glaciers allowed us to estimate the time period over which talus accumulation occurred (i.e. the production time). Dividing the magnitude of normal cliff retreat by the production time, we calculated recession rates for each site. Our study area included a portion of the Sierra Nevada between Yosemite National Park and Lake Tahoe. Rockwall recession rates determined for 40 alpine cliffs in this region range from 0·02 to 1·22 mm/year, with an average value of 0·28 mm/year. We found good correlation between rockwall recession rate and SMR which is best characterized by an exponential decrease in erosion rate with increasing rock mass strength. Analysis of the individual components of the SMR reveals that joint orientation (with respect to the cliff face) is the most important parameter affecting the rockwall erosion rate. The complete SMR score, however, best synthesizes the lithologic variables that contribute to the strength and erodibility of these rock slopes. Our data reveal no strong independent correlations between rockwall retreat rate and topographic attributes such as elevation, aspect, or slope angle. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
7.
在研究岩浆岩和变质岩特点的基础上,根据岩浆岩岩体结构体的大小、有无缓倾的结构面及岩浆岩散粒状边坡岩体的特征,将岩浆岩边坡岩体结构划分为4大类7个亚类;根据部分正变质岩边坡岩体结构与岩浆岩边坡岩体结构类似,部分副变质岩中发育的板理、千枚理、片理类似沉积岩中的层理,以及边坡岩体具有似层状岩体结构的特征,把变质岩边坡岩体的结构划分为5大类11个亚类。岩体结构的划分为边坡稳定性研究、边坡病害治理及其工程效果评价提供了依据。 相似文献
8.
Heather A. Viles 《地球表面变化过程与地形》2013,38(1):62-70
Weathering is linked complexly to the erosion and evolution of rock slopes. Weathering influences both the strength of rock slopes and the stresses that act upon them. While weathering has often been portrayed in an over‐simplified way by those studying rock slope instability, in reality it consists of multiple processes, acting over different spatial and temporal scales, with many complex inter‐linkages. Through a demonstration of the sources of non‐linearities in rock slope weathering systems and their implications for rock slope instability, this paper proposes five key linkages worthy of further study. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
9.
Seismicity is known to contribute to landscape denudation through its role in earthquake‐triggered slope failure; but little is known about how the intensity of seismic ground motions, and therefore triggering of slope failures, may change through time. Topography influences the intensity of seismic shaking – generally steep slopes amplify shaking more than flatter slopes – and because glacial erosion typically steepens and enlarges slopes, glaciation may increase the intensity of seismic shaking of some landforms. However, the effect of this may be limited until after glaciers retreat because valley ice or ice‐caps may damp seismic ground motions. Two‐dimensional numerical models (FLAC 6.0) were used to explore how edifice shape, rock stiffness and various levels of ice inundation affect edifice shaking intensity. The modelling confirmed that earthquake shaking is enhanced with steeper topography and at ridge crests but it showed for the first time that total inundation by ice may reduce shaking intensity at hill crests to about 20–50% of that experienced when no ice is present. The effect is diminished to about 80–95% if glacier ice level reduces to half of the mountain slope height. In general, ice cover reduced shaking most for the steepest‐sided edifices, for wave frequencies higher than 3 Hz, and when ice was thickest and the rock had shear stiffness well in excess of the stiffness of ice. If rock stiffness is low and shear‐wave velocity is similar to that of ice, the presence of ice may amplify the shaking of rock protruding above the ice surface. The modelling supports the idea that topographic amplification of earthquake shaking increases as a result of glacial erosion and deglaciation. It is possible that the effect of this is sufficient to have influenced the distribution of post‐glacial slope failures in glaciated seismically active areas. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
10.
11.
12.
Due to various decay processes associated with weathering, the stability of artificial slopes in weak rocks may be affected well within their envisaged engineering lifetime. Conceptually, the decay following the initial stress release after excavation can be described as a process seeking equilibrium between weathering and erosion. The extent to which such an equilibrium is actually reached influences the outcome of the weathering‐erosion decay process as well as the effects that the decay has on the geotechnical properties of the exposed rock mass, and thus ultimately the stability of slopes affected by erosion and weathering. This paper combines two conceptual models for erosion and weathering, and derives a numerical model which predicts the resulting slope development. This can help to predict the development of a slope profile excavated in a weak rock in time, and can be extended with the addition of strength parameters to the weathering profile to enable prediction of slope stability as a function of time. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
13.
以往对平面破坏模式的岩质边坡稳定性评价,主要关注潜在滑坡体在自重、坡体内静水压力和地震荷载耦合作用下沿破坏面的抗滑稳定性,并未涉及各类外荷载作用线不通过潜在滑体重心而引起的绕坡趾倾覆稳定性。针对这一问题,提出地震与张裂缝水压耦合作用下的岩质边坡倾覆稳定性解析方法,基于力矩平衡原理推导出岩质边坡抗倾覆稳定性系数的一般表达式;通过深入的变动参数比较研究,探讨张裂缝水压和地震荷载对抗倾覆安全系数的影响,认为水压是控制岩质边坡倾覆破坏的决定性因素,而地震荷载处于次要因素,其在一定程度上增加或减小抗倾覆稳定性。在此基础上建立不同参数组合下的岩质边坡抗倾覆稳定图,为工程技术人员快速评估饱水岩质边坡地震倾覆稳定性提供直接依据。 相似文献
14.
Strength equilibrium slopes are rock slopes whose gradient θ and rock mass strength (RMS) are in adjustment. The identification of such slopes depends on the accurate specification of the strength equilibrium envelope. Previous attempts to delimit the envelope are reviewed and modifications are proposed that permit its more rigorous statistical definition. Because θ can be measured much more reliably than RMS, the structural relation between these variables is estimated by regressing RMS on θ, and the strength equilibrium envelope is defined by the 95 per cent confidence limits. The analysis is performed on a data set of 268 rock slopes, representing all the data on RMS and θ hitherto employed in published studies of strength equilibrium slopes. 相似文献
15.
高边坡在水平动荷载作用下的动力响应规律研究 总被引：4，自引：1，他引：4
高岩石边坡在水平动荷载作用下的动力响应规律是有关工程界十分关心的问题。本文通过大量的数值模拟分析对边坡的动力响应规律进行研究，发现了高岩石边坡在水平动荷载下动力响应的加速度、速度、位移三量放大系数等值线在边坡剖面上分布的规律性特点。对于一定的岩土体材料，当边坡高度在一定时，边坡动力响应的加速度、速度、位移三量会随着边坡角度的增大而减小；当边坡的角度一定时，边坡动力响应的加速度、速度、位移三量会随着边坡高度的增加而放大；边坡的下覆岩层的材料特性对于边坡的动力响应的加速度、速度、位移三量的放大作用的影响具有一定的规律性；边坡动力响应的加速度、速度二量受动荷载的特征周期影响较位移明显，具有一定的规律性。边坡的边缘部位对振动的反应幅值较之内部存在放大现象，坡度决定了三量分布的等值线方向的走向。其结论性成果体现了高岩石边坡的地震动力响应特征，为高边坡工程提供理论基础和实践依据。 相似文献
16.
Rock slope instability assessment using spatially distributed structural orientation data in Darjeeling Himalaya (India) 总被引：1，自引：0，他引：1
Saibal Ghosh Andreas Günther Emmanuel John M. Carranza Cees J. van Westen Victor G. Jetten 《地球表面变化过程与地形》2010,35(15):1773-1792
We discuss a geographic information system (GIS)‐based methodology for rock slope instability assessment based on geometrical relationships between topographic slopes and structural discontinuities in rocks. The methodology involves (a) regionalization of point observations of orientations (azimuth and dip) of structural discontinuities in rocks in order to generate a digital structural model (DStM), (b) testing the kinematical possibility of specific modes of rock slope failures by integrating DStMs and digital elevation model (DEM)‐derived slope and aspect data and (c) computation of stability scenarios with respect to identified rock slope failure modes. We tested the methodology in an area of 90 km2 in Darjeeling Himalaya (India) and in a small portion (9 km2) within this area with higher density of field structural orientation data. The results of the study show better classification of rock slope instability in the smaller area with respect to known occurrences of deep‐seated rockslides than with respect to shallow translational rockslides, implying that structural control is more important for deep‐seated rockslides than for shallow translational rockslides. Results of scenario‐based analysis show that, in rock slopes classified to be unstable, stress‐induced rock slope instability tends to increase with increasing level of water saturation. The study demonstrates the usefulness of spatially distributed data of orientations of structural discontinuities in rocks for medium‐ to small‐scale classification of rock slope instability in mountainous terrains. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
17.
考虑崩塌堆积体边坡岩土体参数随机性和模糊性,以及地震力双向性,建立一种边坡地震动力模糊可靠度计算方法,针对竖向地震力对崩塌堆积体边坡稳定可靠性的影响进行进一步研究。首先,选用动力有限元时程分析法计算出双向地震工况下崩塌堆积体边坡的响应特征,并运用模糊理论对强度参数进行模糊性处理;然后,根据Mohr-Coulumb强度准则构建边坡安全系数与可靠度的时程计算模型;最后,采用边坡地震可靠性评价新方法,通过MATLAB编写相应程序,实现计算和分析结果的快速输出。案例结果表明:新方法计算结果更加合理,对工程而言也更加安全;竖向地震作用均对崩塌堆积体边坡整体可靠性存在影响,但影响程度需根据工程实际情况进行分析。在算例工况下,竖向地震对崩塌堆积体边坡的可靠性影响很小,仅使得可靠度降低3.55%,因此,可仅考虑水平地震的影响。 相似文献
18.
Seismic stability of slopes has been traditionally analyzed with vertically propagated earthquake waves. However, for rock slopes, the earthquake waves might approach the outcrop still with a evidently oblique direction. To investigate the impact of obliquely incident earthquake excitations, the input method for SV and P waves with arbitrary incident angles is conducted, respectively, by adopting the equivalent nodal force method together with a viscous-spring boundary. Then, the input method is introduced within the framework of ABAQUS software and verified by a numerical example. Both SV and P waves input are considered herein for a 2D jointed rock slope. For the jointed rock mass, the jointed material model in ABAQUS software is employed to simulate its behavior as a continuum. Results of the study show that the earthquake incident angles have significance on the seismic stability of jointed rock slopes. The larger the incident angle, the greater the risk of slope instability. Furthermore, the stability of the jointed rock slopes also is affected by wave types of earthquakes heavily. P waves induce weaker responses and SV waves are shown to be more critical. 相似文献
19.
John Barlow 《地球表面变化过程与地形》2002,27(10):1125-1135
This work addresses the post‐glacial development of the Niagara Escarpment, specifically the east‐facing scarp slopes between Hamilton and Collingwood. The escarpment is one of a series of scarps that shape the Great Lakes Basin. One interpretation suggests that the escarpment has evolved through homoclinal recession to the west. It is therefore viewed as an erosional feature brought about due to fluvial action on the weaker shale formations that underlie the cap rock. However, the deposition of large amounts of drift during the Pleistocene glaciation has resulted in the disruption of the preglacial drainage pattern within the Great Lakes Basin. Therefore, the current drainage is typically orthogonal to the scarp face with an absence of fluvial action along the base. Consequently, the cuesta is experiencing an extremely slow rate of retreat. Conventional thinking on the evolution of the present morphology suggests that it developed rapidly following deglaciation due to periglacial processes. The concept of the escarpment as a relict feature during the Holocene therefore pervades the modern literature. However, the cambering of the cap rock towards the scarp face and the apparent motion of individual joint‐bounded blocks indicates that in the absence of exogenetic processes, a slow development due to endogenetic processes has dominated the modern development of the escarpment. It has been proposed that the present morphology of the cliffed sections may be due to deformation within the shale layers. In order to test this hypothesis, the rheology of the rocks that form the escarpment was tested and compared to the gravitational stresses that would be expected within the rock mass. The results indicate that the compressive strength of the shale layers of the Cabot Head Formation is lower than the expected effective stresses. It is therefore concluded that in the absence of high confining stresses, as would be expected near the cliff face, slow plastic deformation within this formation is occurring. The morphological expression of this deformation is seen in the cambering of the escarpment, the dilation of pre‐existing joints, and the rotation of joint‐bounded blocks. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
20.
Seismic performance of natural slopes, earth structures and solid-waste landfills can be evaluated through displacement-based methods in which permanent displacements induced by earthquake loading are assumed to progressively develop along the critical sliding surface as a result of transient activation of plastic mechanisms within the soil mass. For sliding mechanisms of general shape the earthquake-induced displacements should be computed using a model that provides a closer approximation of sliding surface. When large permanent displacement are induced by seismic actions, due to substantial shear strength reduction, and significant changes in ground surface occur, an improved estimate of permanent displacement can be obtained using a model which accounts for shear strength reduction and mass transfer between adjacent portions of the slope resulting from geometry changes of ground surface during the seismic event.In this paper, a GLE-based model is proposed for seismic displacement analysis of slopes that accounts for shear strength degradation and for geometry rearrangement. Model accuracy is validated against experimental results obtained from shaking table tests carried out on small scale model slopes. Comparison of computed and experimental results demonstrates the capability of the proposed approach in capturing the main features of the observed seismic response of the model slopes. 相似文献