首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 140 毫秒
1.
Temporal changes of As concentration in surface waters were observed in some areas of the Czech Republic. Mobilized As originates from past atmospheric deposition. To understand the factors influencing As aqueous concentration and mobility the chemistry and runoff generation of a number of brooks, springs and rivers in the central part of the Elbe River catchment, Czech Republic, were monitored. Seasonal variations of As (from 0.5 to 10.5 μg L−1), Fe (from 0.05 to 3.9 mg L−1) and DOC (dissolved organic C – from 1.2 to 17.5 mg L−1) were observed in monitored stream waters with maximum values of As and Fe in the summer months at pH values 7.6–7.8. The concentration of As in particles with a diameter < 60 μm correlates with the Fe concentration. There is no correlation between Fe and As in filtered samples (<0.45 μm). The As concentration in stream water colloids depends on an increase in DOC concentration and a decrease in ionic strength. The DOC stabilizes As in solution and reduces its re-adsorption on Fe colloids and consequently As concentration in the stream increases.  相似文献   

2.
A multi-proxy study has been performed on a sediment core from the Curuai floodplain, Central Amazonia. The combination of elemental, isotopic and molecular analysis of a 110 cm core (a record of ca. the last 100 yr) allowed reconstruction of the hydrological conditions of organic matter (OM) deposition. Two units could be delineated. The first (UI) was composed of three sub-units: UIa (0–15 cm), composed of highly degraded organic particles originating from the surrounding soil and indicative of restricted transport; UIb (15–48 cm), during which the region was permanently flooded and the material stored came from soil runoff, mainly from alluvial forest; and UIc (48–88 cm) composed of material from Amazon River suspended sediment, itself originating from OM degradation in forest soil. In UII (88–111 cm), the OM originated mainly from the forest soil and other plant remains in the floodplain. The data reveal that, during the four distinct depositional periods, the sedimentary OM alternated between land derived soil and alluvial vegetation due to changes in hydrodynamics.  相似文献   

3.
Some sedimentological characteristics of fluvial environments located in the northeastern region of the Chaco–Pampa plain were analysed in order to determine the possible influence of the loessic headwaters of local basins. Concentrations of suspended sediments, as well as grain size of the river beds, were compared. Unexpectedly, it was found that the suspended load has an inverse relationship with the hydrometric levels, with the exception of highly saline streams (conductivity values between 4300 and 11,000 μS cm−1). The mean concentration of suspended sediments was 63.1 and 206.3 mg l−1 in flood and low water periods, respectively. The grain size of bed sediments was relatively homogeneous along the whole hydrological cycle. Sandy–silty bottoms predominate in channels, followed by silty–sandy and clayey–silty bottom types. Sediment transport mainly occurs in accelerating flow suspension, overcoming the critical erosion velocity. During flood periods, some parameters exceeded by 70% the values recorded during the low water phase.  相似文献   

4.
Suspended solids found in porewaters obtained in waterlogged soil sequences that included representative laterite–podzol transitions, associated brooks and major rivers of the Rio Negro watershed (Brazil) were studied using electron paramagnetic resonance (EPR) and Fourier-transform infrared spectroscopies. The main goal was to ascertain sources and track the evolution of suspended matter using a ubiquitous chemical species, FeIII complexed to organic matter (FeOM). Three size fractions were separated by tangential-flow (ultra)filtration: particulate (> 0.2 μm), dense (P) and light (Ps), and colloidal (5 kD < Col. < 0.2 μm) fractions. Quantitative results were acquired for Col. and Ps fractions which are predominantly organic in nature.FeOM concentration (in ‰ dry weight) was determined to be relatively low in suspended solids found in black waters from podzol porewaters and brooks whereas in the main rivers it was several times higher. FeOM concentrations were also correlated with Fe(II)/Fe(III) ratios in solution; these ratios were high in podzol porewaters and low in the rivers. Considering that organic complexation of Fe(II) is minor when compared to that of Fe(III), two interpretations were proposed to account for the above observation. First, [FeOM] was assumed to be distributed along a mixing line, with the clear waters from laterites and the black waters from podzols being its end-members. Consequently, [FeOM] can be used to trace the source of suspended material. Second, dissolved Fe(II) from podzol areas was considered to be progressively oxidized as pore waters move towards the mainstream. According to this mechanism, iron is complexed by organic matter or precipitated as oxides, thus producing an evolution of colloidal matter. As a result of these mechanisms' action, both the high production of Fe(II) and organic matter at the waterlogged podzol–laterite transition areas are major factors affecting iron export in the Rio Negro watershed.  相似文献   

5.
This study was conducted to assess the anthropogenic impact on metal concentrations in the bottom sediments of the Juam reservoir, Korea, and in stream sediments in its catchment, and to estimate the potential mobility of selected metals (Fe, Mn, Cu, Ni, Pb and Zn) using sequential extraction. A comparison of the metal concentrations in the stream sediments with mean background values in sediments collected from first- or second-order creeks shows that Pb, Cu and Ni are the most affected by anthropogenic inputs. The 206Pb/207Pb ratios of the bottom and core sediments (means: 1.2320 ± 0.0502 and 1.2212 ± 0.0040, respectively) suggest that Pb contamination is mainly due to the waste discharge of abandoned coal and metal mines rather than industrial and airborne sources. Considering the proportion of metals bound to the exchangeable, carbonate and reducible fractions, the comparative mobility of metals is suggested to decrease in the order Mn > Pb > Zn > Ni > Fe ≫ Cu.  相似文献   

6.
The abandoned Sn-W Ribeira mine, northeast of Portugal, contained quartz veins with cassiterite, wolframite, scheelite, pyrite, arsenopyrite, sphalerite, chalcopyrite, manganocolumbite, bismuthinite, native bismuth, phosphates and carbonates. The exploration took place on the northern slope of the Viveiros stream, which is an affluent of the Sabor River. The waste-rock dumps and tailings were deposited on the hillside, close to the mine and are nowadays exposed to significant weathering and erosion, as they are not vegetated. The eroded material is transported by the Viveiros stream toward the Sabor River. A seasonal stream drains the tailings. The stream sediments samples were collected along the Viveiros stream, in the seasonal stream, in a seasonal spring at the bottom of the tailings, in the Sabor River and in other streams not affected by mine workings, following the mine influence along the Viveiros stream and in the Sabor River (1.2 km away from the mine workings). The data show that the degree of pollution increases along the Viveiros stream, especially in winter. The highest degree of pollution is for As, In, W, Sn and Bi. The sediments from the drainage of the main tailings are particularly polluted during winter, by Bi, In and Sn. The sedimentary precipitate from the spring is polluted in Cu, As, In, Sn, Ta, W, Bi, Zn, Nb, Ag, Sb and Ta. The sediments from the Sabor River are significantly polluted by As, Ag, In, Sn, W and Bi. The sediments from the regional streams, Viveiros stream and Sabor River have similar REE (NASC normalized) patterns (ΣREE = 131.7–185.9 mg/kg, LaN/LuN = 1.23–1.42 and Eu/Eu* = 1.02), while those from the seasonal stream, crossing the main tailings, are enriched in REE (ΣREE = 250.3–283.6 mg/kg, LaN/LuN = 1.6–2.09 and Eu/Eu* = 0.96). The general decrease in LaN/LuN values with increase in total Fe2O3 can be explained by the partitioning of HREE to the solid Fe-oxides phase. The sedimentary precipitate and coatings, which are mainly formed by Fe-oxy-hydroxides, but also contain jarosite, are impoverished in all REE. The impoverishment can be explained by the release of REE from the surface of the Fe-oxy-hydroxides, which occurs due to a local lowering of pH, caused by jarosite dissolution. During successive alternate cycles of wet and dry conditions, takes place the formation of Fe-oxy-hydroxides and jarosite in the sedimentary precipitate and coatings. The subsequent dissolution of jarosite releases acidity, thus promoting de-sorption of REE from the Fe-oxy-hydroxides mineral phases.  相似文献   

7.
《Applied Geochemistry》2005,20(5):989-1016
Groundwater from the Quaternary loess aquifer of La Pampa, central Argentina, has significant problems with high concentrations of As (up to 5300 μg L−1) as well as other potentially toxic trace elements such as F, B, Mo, U, Se and V. Total As concentrations in 45 loess samples collected from the aquifer have a range of 3–18 mg kg−1 with a mean of 8 mg kg−1. These values are comparable to world-average sediment As concentrations. Five samples of rhyolitic ash from the area have As concentrations of 7–12 mg kg−1. Chemical analysis included loess sediments and extracted porewaters from two specially cored boreholes. Results reveal a large range of porewater As concentrations, being generally higher in the horizons with highest sediment As concentrations. The displaced porewaters have As concentrations ranging up to 7500 μg L−1 as well as exceptionally high concentrations of some other oxyanion species, including V up to 12 mg L−1. The highest concentrations are found in a borehole located in a topographic depression, which is a zone of likely groundwater discharge and enhanced residence time. Comparison of sediment and porewater data does not reveal unequivocally the sources of the As, but selective extract data (acid-ammonium oxalate and hydroxylamine hydrochloride) suggest that much of the As (and V) is associated with Fe oxides. Primary oxides such as magnetite and ilmenite may be partial sources but given the weathered nature of many of the sediments, secondary oxide minerals are probably more important. Extract compositions also suggest that Mn oxide may be an As source. The groundwaters of the region are oxidising, with dissolved O2, NO3 and SO4 normally present and As(V) usually the dominant dissolved As species. Under such conditions, the solubility of Fe and Mn oxides is low and As mobilisation is strongly controlled by sorption–desorption reactions. Desorption may be facilitated by the relatively high-pH conditions of the groundwaters in the region (7.0–8.8) and high concentrations of potential competitors (e.g. V, P, HCO3). PHREEQC modelling suggests that the presence of V at the concentrations observed in the Pampean porewaters can suppress the sorption of As to hydrous Fe(III) oxide (HFO) by up to an order of magnitude. Bicarbonate had a comparatively small competitive effect. Oxalate extract concentrations have been used to provide an upper estimate of the amount of labile As in the sediments. A near-linear correlation between oxalate-extractable and porewater As in one of the cored boreholes investigated has been used to estimate an approximate Kd value for the sediments of 0.94 L kg−1. This low value indicates that the sediments have an unusually low affinity for As.  相似文献   

8.
《Applied Geochemistry》2005,20(5):841-848
Electrokinetic remediation is an emerging technology that has generated considerable interest as a technique for the in situ remediation of clay-rich soils and sediments. Despite promising experimental results, however, at present there is no standardised universal electrokinetic soil/sediment remediation approach. Many of the current technologies are technically complex and energy intensive, and geared towards the removal of 90% or more of specific contaminants, under very specific field or laboratory-based conditions. However, in the real environment a low-tech, low-energy contaminant reduction/containment technique may be more appropriate and realistic. Such a technique, FIRS (Ferric Iron Remediation and Stabilisation), is discussed here. The FIRS technique involves the application of a low magnitude (typically less than 0.2 V/cm) direct electric potential between two or more sacrificial, Fe-rich, electrodes emplaced in, or either side of, a contaminated soil or sediment. The electric potential is used to generate a strong pH (and Eh) gradient within the soil column (pH 2–13), and force the precipitation of an Fe-rich barrier or “pan” in the soil between the electrodes. Geochemical and geotechnical data for FIRS-treated sediments from the Ravenglass estuary, Cumbria, UK indicate that the technique can significantly reduce contaminant concentration in treated soil, by remobilisation of contaminants and concentration on, or around, the Fe-rich barrier. Arsenic, in particular, seems highly amenable to the FIRS treatment, due to its solubility under the high pH conditions generated near to the cathode, and its marked geochemical affinity with the freshly precipitated Fe oxides and oxyhydroxides in the Fe barrier. Geotechnical tests indicate that the Fe barrier produced by the technique is practically impervious (permeability = 10−9 m/s or less), and has moderate mechanical strength (UCS ∼11 N/mm2). Notably, a large increase in shear strength in the treated soil near to the anode electrode (due to Fe cementation and/or dewatering) is also observed, without significant loss of porosity. The data indicate that the FIRS technique shows considerable promise as an in situ method for contaminated land remediation and soil water containment, and for improving the mechanical properties of soils (contaminated or otherwise) for civil engineering purposes.  相似文献   

9.
《Applied Geochemistry》2006,21(7):1240-1247
This paper reports the abundance of elemental S in drain sediments associated with acid sulfate soils. The sediments exhibited near-neutral pH (5.97–7.27), high concentrations of pore-water Fe2+ (1.37–15.9 mM) and abundant oxalate-extractable Fe (up to 4300 μmol g−1). Maximum acid-volatile sulfide (AVS) concentrations in each sediment profile were high (118–1019 μmol g−1), with AVS often exceeding pyrite-S. Elemental S occurred at concentrations of 13–396 μmol g−1, with the higher concentrations exceeding previous concentrations reported for other sedimentary systems. Up to 62% of reduced inorganic S near the sediment/water interface was present as elemental S, due to reaction between AVS and oxidants such as O2 and Fe(III). Significant correlation (r = 0.74; P < 0.05) between elemental S and oxalate-extractable Fe(III) is indicative of elemental S formation by in situ oxidation of AVS. The results indicate that AVS oxidation in near-surface sediments is dynamic in acidified coastal floodplain drains, causing elemental S to be a quantitatively important intermediate S fraction. Transformations of elemental S may therefore strongly influence water quality in ASS landscapes.  相似文献   

10.
《Applied Geochemistry》2006,21(7):1093-1108
Peña del Hierro is an abandoned mine site located in the catchment area of the Tinto river (Pyrite Belt, SW Spain). As leaching from the spoils affect the quality of the stream water, the waste dumps have been characterized for mineralogy, geochemistry and granulometry to obtain an estimate of the potential pollution. Waste rock dumps in Peña del Hierro are very heterogeneous and are mainly composed of acid volcanic tuffs > gossan > shales > roasted pyrite ashes > floated pyrite. The volcanic tuffs, the gossan and the shales coexist in the same piles. The roasted pyrite ashes and the floated pyrite form more homogeneous dumps. The dissolution of pyrite concentrated in pyrite ashes and floated pyrite units can generate acid mine drainage. Nevertheless, acid volcanic tuffs, which are rich in pyrite and have no neutralizing minerals, are the main source of these acidic effluents. Only muscovite might partially neutralize the acidity, but the dissolution of this mineral is too slow to compensate for acidity. The occurrence of jarosite in the <2 mm fraction indicates that extreme acid mine drainage occurs. The gossan and roasted pyrite ashes have high contents of trace elements. According to their concentration, As (46–1710 ppm), Pb (113–3455 ppm) and Hg (0–53) are some of the most important toxic trace elements in these wastes. In dumps mainly composed of volcanic tuffs most of the trace elements derive from the gossan mixed in the piles. Gossan is stable in an oxidizing environment, but acidic effluents (pH < 2) can dissolve Fe oxyhydroxides from them and release high amounts of trace elements to the stream water. This research contributes to estimating the production of acid mine drainage and the actual contamination risk of potentially toxic elements in soils and waters of this area, and could be the base for possible future mitigation actions in other areas affected by mining wastes.  相似文献   

11.
The Weilasituo and Bairendaba Zn–Pb–Ag–Cu–(Sn–W) sulphide deposits are located in the southern part of Great Xing'an Range of Inner Mongolia in China. The deposits are located at shallow depths in the newly discovered Weilasituo porphyry hosting Sn–W–Rb mineralization. The mineralization at Weilasituo and Bairendaba consist of zoned massive sulphide veins within fractures cutting the Xilinhot Metamorphic Complex and quartz diorite. The Weilasituo deposit gradually zones from the Cu-rich Zn–Cu sulphide mineralization in the west to Zn-rich Zn–Cu sulphide mineralization in the east. The Bairendaba deposit has a Cu-bearing and Zn-rich core through a transitional zone devoid of copper to an outer zone of Zn–Pb–Ag mineralization. Three main veins contain more than 50 wt.% of the contained metal in the two deposits with their metal ratios displaying a systematic and gradual increase in Zn/Cu, Pb/Zn and Ag/Zn ratios from the western part of Weilasituo to the eastern part of Bairendaba.Three stages of vein-type mineralization are recognized. Early, sub-economic mineralization consists of a variable proportion of euhedral arsenopyrite, pyrite, quartz, and rare wolframite, scheelite, cassiterite, magnetite and cobaltite. This was succeeded by main stage mineralization with economic concentration of zoned Cu, Zn, Pb and Ag sulphide minerals along strike within the veins. The zones consist of the assemblages: (1) pyrrhotite–Fe-rich sphalerite–chalcopyrite(–quartz–fluorite) at west Weilasituo; (2) pyrrhotite–Fe-rich sphalerite–chalcopyrite(–galena–tetrahedrite–quartz–fluorite) at east Weilasituo; (3) pyrrhotite–Fe-rich sphalerite–chalcopyrite(–galena–tetrahedrite–quartz–fluorite) in the centre of Bairendaba; (4) pyrrhotite–Fe-rich sphalerite–galena(–chalcopyrite–tetrahedrite–quartz–fluorite) in the transition zone of Bairendaba; and (5) pyrrhotite–Fe-rich sphalerite–galena–tetrahedrite(–chalcopyrite–falkmanite–argentite–pyrargyrite–quartz–fluorite) in the outer zone at Bairendaba. Post-main ore stage is devoid of sulphides and characterized overprinting of fluorite, sericite, chlorite, illite, kaolinite and calcite.Zircon SHRIMP U–Pb dating, Zircon LA–ICP–MS U–Pb dating, molybdenite Re–Os isochron dating, and muscovite Ar–Ar dating indicate the Beidashan granitic batholith was intruded at 140 ± 3 Ma (MSWD = 3.3), the porphyritic monzogranite from marginal facies of the Beidashan batholith was intruded at 139 ± 2 Ma (MSWD = 0.75), the mineralized quartz porphyry was intruded at 135 ± 2 Ma (MSWD = 0.91), the greisen mineralization occurred at 135 ± 11 Ma (MSWD = 7.2), and the post-main ore stage muscovite deposited at 129.5 ± 0.9 Ma. The new geochronology data show the porphyry Sn–W–Rb and vein-type sulphide mineralization are contemporaneous with granitic magmatism in the region.The metal zonation at the Weilasituo and Bairendaba deposits is a result of progressive metal deposition. This was during the evolution of a metal-bearing fluid along the strike of the veins and during the main stage of ore formation at the upper part of the deep-seated porphyry Sn–W–Rb system. This progressive zonation indicates that the deposits represent end-numbers formed from one ore-forming fluid, which moved from west to east from the porphyry. The metal zonation patterns of the major veins are consistent with metal-bearing fluid entering the system with the precipitation of chalcopyrite proximally and sphalerite, galena and Ag-bearing minerals more distally. We show that the mechanism of metal deposition is therefore controlled by thermodynamic conditions resulting in the progressive separation of sulphides from the metal-bearing fluid. The temperature gradient between the inflow zone and the outflow zone appears to be one of the key parameters controlling the formation of the metal zonation pattern. The sulphide precipitation sequence is consistent with a low fS2 and low fO2 state of the acidic metal-bearing fluid. The metal zonation pattern provides helpful clues from which it is possible to establish the nature of fluid migration and metal deposition models to locate a possible porphyry mineralization at depth in the Great Xing'an Range, which is consistent with the geology of the newly discovered porphyry Sn–W–Rb system.  相似文献   

12.
The newly discovered Handagai skarn Fe–Cu deposit is located in the northern Great Xing'an Range of NE China and is hosted by the Ordovician Luohe Formation. The orebodies that form the deposit are generally concordant with the bedding within these sediments, and are spatially related to areas of skarn development. The Fe–Cu mineralization in this area records four stages of paragenesis, namely prograde skarn, retrograde skarn, quartz–sulfide, and quartz–carbonate stages. The Handagai deposit is a calcic skarn that is dominated by an andradite–diopside–epidote–actinolite assemblage. The mineralogy and geochemistry of the skarn indicate that it formed from a hydrothermal fluid that altered the carbonate units in this area to a garnet (And42–95Grs4–53) and pyroxene (Di71–78Hd22–29Jo0–2) bearing skarn. The epidote within the skarn has an epidote end-member composition, with the chlorite in the skarn dominantly Fe-rich, indicating that these minerals formed in an Fe-rich environment. The petrographic, microthermometric, and Raman spectroscopic analysis of fluid inclusions within garnet, epidote, actinolite, quartz, and calcite precipitated at different stages of formation of the Handagai deposit indicate that mineralization-related fluid inclusions are either liquid-rich two-phase H2O–NaCl (type I), gas-rich two-phase H2O–NaCl (type II), three-phase (liquid + vapor + solid) H2O–NaCl (type III), or CO2–H2O–NaCl inclusions (type IV). The early stages of mineralization are associated with all four types of inclusion, whereas the later stages of mineralization are only associated with type I and II inclusions. Inclusion homogenization temperatures vary between the four stages of mineralization (370 °C–530 °C and > 600 °C, 210 °C–290 °C, 190 °C–270 °C, and 150 °C–230 °C, from early to late, respectively), with salinities also varying between the earlier and later stages of mineralization (11–18 and > 45, 7–15, 6–9, and 3–7 wt.% NaCl equivalent (equiv.), respectively). The majority of the inclusions within the Handagai deposit have homogenization temperatures and salinities of 200 °C–350 °C and 4–14 wt.% NaCl equiv., respectively, indicating that this is a medium–high temperature and medium–low salinity type deposit. The fluid inclusions were trapped at pressures of 11 to 72 MPa, corresponding to depths of 0.4 to 2.9 km. The geology, mineralogy, geochemistry, and fluid inclusions microthermometry indicate that the Handagai deposit formed as a result of contact infiltration metasomatism, with the deposition of ore minerals resulting from a combination of factors that include boiling as a result of reduced pressure, cooling, and fluid mixing.  相似文献   

13.
Serpentinite rocks, high in Mg and trace elements including Ni, Cr, Cd, Co, Cu, and Mn and low in nutrients such as Ca, K, and P, form serpentine soils with similar chemical properties resulting in chemically extreme environments for the biota that grow upon them. The impact of parent material on soil characteristics is most important in young soils, and therefore the incipient weathering of serpentinite rock likely has a strong effect on the development of serpentine soils and ecosystems. Additionally, porosity generation is a crucial process in converting rock into a soil that can support vegetation. Here, the important factors affecting the incipient weathering of serpentinite rock are examined at two sites in the Klamath Mountains, California. Serpentinite-derived soils and serpentinite rock cores were collected in depth profiles from each sampling location. Mineral dissolution in weathered serpentinite samples, determined by scanning electron microscopy, energy dispersive spectrometry, electron microprobe analyses, and synchrotron microXRD, is consistent with the order, from most weathered to least weathered: Fe-rich pyroxene > antigorite > Mg-rich lizardite > Al-rich lizardite. These results suggest that the initial porosity formation within serpentinite rock, impacting the formation of serpentine soil on which vegetation can exist, is strongly affected both by the presence of non-serpentine primary minerals as well as the composition of the serpentine minerals. In particular, the presence of ferrous Fe appears to contribute to greater dissolution, whereas the presence of Al within the parent rock appears to contribute to greater stability. Iron-oxidizing bacteria present at the soil–rock interface have been shown in previous studies to contribute to the transition from rock to soil, and soils and rock cores in this study were therefore tested for iron-oxidizing bacteria. The detection of biological iron oxidation in this study indicates that the early alteration of these Fe-rich minerals may be mediated by iron-oxidizing bacteria. These findings help provide insight into the incipient processes affecting serpentinite rock weathering, important to the development of extreme serpentine soils and the biota that grow on them.  相似文献   

14.
The original ore-fluid of the Huogeqi Cu–Pb–Zn deposit in Inner Mongolia, northern China, was enriched in heavy oxygen isotopes with δ18O values ranging from 9.9 to 11.4 per mil, which is characteristic of the metamorphic devolatilization of pelitic rocks. The δD values determined by direct measurement of syn-ore hydrothermal tremolite range from − 116 to − 82 per mil, lying between the domains of typical metamorphic fluid and meteoric water, which is in equilibrium with organic matter. Oxygen and hydrogen isotope ratios indicate that the ore-fluid was derived from deep-sourced metamorphic fluid and interacted with organic-rich shale during fluid migration, which is consistent with the fluid evolution history revealed by a previous fluid inclusion study. Sulfides in the deposit are characteristically enriched in heavy S isotopes, with an average δ34S value of 13.4 ± 6.2 per mil (1σ, n = 103). The S-isotope ratios are identical to stratabound sulfides generated through the non-bacterial reduction of Neoproterozoic marine sulfate (with δ34S values of ~ 17 per mil). Previous studies on lead isotopes of sulfides revealed that the ore-forming metals (Cu, Pb, and Zn) at the Huogeqi deposit were also remobilized from a stratabound source. This source was syngenetically elevated in its Cu-, Pb-, and Zn-sulfide content as a result of submarine hydrothermal activities forming sulfide-rich layers within a rift tectonic setting. The Fe isotope ratios for sulfides are consistent with those of an intercalated iron-formation within the ore-hosting rocks, suggesting that the Fe in the sulfides was derived from local host rocks during sulfide precipitation and the Fe-rich rocks are favorable lithological units for high-grade mineralization. The heterogeneous sources of ore-fluid, S, ore-forming metals, and Fe are explained by a multistage genetic model, which is supported by the geological characteristic of the deposit. The enriched sulfides were subsequently remobilized and enriched by metamorphic devolatilization during the Permian and Triassic periods. The metamorphic ore-fluid ascended along a shear zone and interacted with organic-rich shale. Sulfides eventually precipitated within the shear zone at a shallower crustal level, especially where the shear zone intersected Fe-rich host rocks. This multistage genetic model has implications for mineral exploration. Greenschist to amphibolite facies terranes containing thick Neoproterozoic rift sequences are ideal regions for potential Cu–Pb–Zn mineralization. In particular, intercalated volcanic rocks within the rift sequences are indicative of high heat-flow and are ideal for the development of submarine hydrothermal systems. The primary structures hosting mineralization and ore shoots in the Huogeqi area are jogs in the shear zones. In addition, Fe-rich lithological units, such as iron-formations, are ideal hosts for high-grade ore.  相似文献   

15.
Arsenic species including arsenite, arsenate, and organic arsenic were measured in the porewaters collected from Poyang Lake, the largest freshwater lake of China. The vertical distributions of dissolved arsenic species and some diagenetic constituents [Fe(II), Mn(II), S(−II)] were also obtained in the same porewater samples in summer and winter. In sediments the concentration profiles of total As and As species bound to Fe–Mn oxyhydroxides and to organic matter were also determined along with the concentrations of Fe, Mn and S in different extractable fractions. Results indicate that, in the summer season, the concentrations of total dissolved As varying from 3.9 to 55.8 μg/L in sediments were higher than those (5.3–15.7 μg/L) measured in the winter season, while the concentrations of total As species in the solid phase varied between 10.97 and 25.32 mg/kg and between 7.84 and 30.52 mg/kg on a dry weight basis in summer and winter, respectively. Seasonal profiles of dissolved As suggest downward and upward diffusion, and the flux of dissolved As across the sediment–water interface (SWI) in summer and winter were estimated at 3.88 mg/m2 a and 0.79 mg/m2 a, respectively. Based on porewater profiles and sediment phase data, the main geochemical behavior of As was controlled by adsorption/desorption, precipitation and molecular diffusion. The solubility and migration of inorganic As are controlled by Fe–Mn oxyhydroxides in summer whereas they appear to be more likely controlled by both amorphous Fe–Mn oxyhydroxides and sulfides in winter. A better knowledge of the cycle of As in Poyang Lake is essential to a better management of its hydrology and for the environmental protection of biota in the lake.  相似文献   

16.
We report the presence of greenockite from the chromite–PGE–base metal sulfide association in the Bangur Gabbro, Baula-Nuasahi mafic–ultramafic complex. The CdS phase occurs, sans any precursor Cd-bearing phase, as minute grains within siderite micro-veins in close proximity to chlorite in the chalcopyrite + pyrrhotite + pentlandite + violarite assemblage. Using various calibrations, chlorite compositions yielded temperature ranges of 245 to 325 °C. The associated siderite might have formed at or little below the above temperature. Electron probe micro-analyses (EPMA) of greenockite reveal small amounts of Fe (1.01–1.61 wt.%), Zn (1.89–4.54 wt.%), and substitution of Zn for Cd. Laser-ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) analysis of chalcopyrite nearer to and away from siderite micro-veins that host greenockite confirms maximum Cd concentrations of 78 and 144 ppm, respectively, entailing possible derivation of Cd from chalcopyrite. We propose the transport of Cd as bisulfide complex in a low temperature alkaline and reducing fluid and the simultaneous precipitation of greenockite and siderite by reaction with Fe-rich minerals, aided by decrease in pH and/or increase in fO2.  相似文献   

17.
Abra is a blind, sedimentary rock-hosted polymetallic Fe–Pb–Zn–Ba–Cu ± Au ± Ag ± Bi ± W deposit, discovered in 1981, located within the easterly trending Jillawarra rift sub-basin of the Mesoproterozoic Edmund Basin, Capricorn Orogen, Western Australia. The Edmund Basin contains a 4–10 km thick succession of siltstone, sandstone, dolomitic siltstone, and stromatolitic dolomite. The age of the Edmund Group is between 1.66 and 1.46 Ga. The Abra polymetallic deposit is hosted in siltstone, dolostone, sandstone and conglomerate of the Irregully and Kiangi Creek Formations, but the mineralised zones do not extend above an erosion surface marking the change from fluvial to marine facies in the lower part of the Kiangi Creek Formation. The Abra deposit is characterised by a funnel-shaped brecciated zone, interpreted as a feeder pipe, overlain by stratiform–stratabound mineralisation. The stratiform–stratabound mineralisation includes a Red Zone and an underlying Black Zone. The Red Zone is characterised by banded jaspilite, hematite, galena, pyrite, quartz, barite, and siderite. The jaspilite and hematite cause the predominant red colouration. The Black Zone consists of veins and rhythmically banded sulphides, laminated and/or brecciated hematite, magnetite, Fe-rich carbonate and scheelite. In both zones, laminations and bands of sulphide minerals, Fe oxides, barite and quartz commonly exhibit colloform textures. The feeder pipe (Stringer Zone) merges with Black Zone and consists of a stockwork of Fe-carbonate-quartz, barite, pyrite, magnetite and chalcopyrite, exhibiting fluidised and/or jigsaw textures.The Abra mineral system is characterised by several overprinting phases of hydrothermal activity, from several stages of brecciation and fluidisation, barite and sulphide veining to barren low-temperature chalcedonic (epithermal regime) veining. Hydrothermal alteration minerals include multi-stage quartz, chlorite, prehnite, Fe-rich carbonate and albite. Albite (Na metasomatism) is an early alteration phase, whereas Fe-rich carbonate is a late phase. Fluid inclusion studies indicate that the ore fluids had temperatures ranging from 162 to 250 °C, with salinities ranging from 5.8 to about 20 wt.% NaCl. In the course of our studies, microthermometric and Raman microprobe analyses were performed on fluid inclusions in carbonate, quartz and barite grains. Fluid inclusions in quartz show homogenisation temperatures ranging from 150 to 170 °C with calculated salinities of between 3.7 and 13.8 wt.% NaCl.The sulphur isotopic system shows δ34S values ranging from 19.4 to 26.6‰ for sulphides and from 37.4 to 41.9‰ for barite (Vogt and Stumpfl, 1987, Austen, 2007). Sulphur isotope thermometry between sulphides and sulphide–barite pairs yields values ranging from 219 to 336 °C (Austen, 2007).Galena samples were analysed for Pb isotope ratios, which have been compared with previous Pb isotopic data. The new Pb isotope systematics show model ages of 1650–1628 Ma, consistent with the formation of the host Edmund Basin.Re–Os dating of euhedral pyrite from the Black Zone yielded an age of ~ 1255 Ma. This age corresponds to the 1320–1170 Ma Mutherbukin tectonic event in the Gascoyne Complex. This event is manifested primarily along a WNW-trending structural corridor of amphibolite facies rocks, about 250 km to the northwest of the Abra area. It is possible that the Re–Os age represents a younger re-activation event of an earlier SEDEX style system with a possible age range of 1640–1590 Ma.A genetic model for Abra is proposed based on the above data. The model involves two end-members ore-forming stages: the first is the formation of the SEDEX style mineral systems, followed by a second multi-phase stage during which there was repeated re-working of the mineral system, guided by seismic activity along major regional faults.  相似文献   

18.
《Applied Geochemistry》2006,21(11):1837-1854
Total dissolved and total particulate Hg mass balances were estimated during one hydrological period (July 2001–June 2002) in the Thur River basin, which is heavily polluted by chlor-alkali industrial activity. The seasonal variations of the Hg dynamics in the aquatic environment were assessed using total Hg concentrations in bottom sediment and suspended matter, and total and reactive dissolved Hg concentrations in the water. The impact of the chlor-alkali plant (CAP) remains the largest concern for Hg contamination of this river system. Upstream from the CAP, the Hg partitioning between dissolved and particulate phases was principally controlled by the dissolved fraction due to snow melting during spring high flow, while during low flow, Hg was primarily adsorbed onto particulates. Downstream from the CAP, the Hg partitioning is controlled by the concentration of dissolved organic and inorganic ligands and by the total suspended sediment (TSS) concentrations. Nevertheless, the particulate fluxes were five times higher than the dissolved ones. Most of the total annual flux of Hg supplied by the CAP to the river is transported to the outlet of the catchment (total Hg flux: 70 μg m−2 a−1). Downstream from the CAP, the bottom sediment, mainly composed of coarse sediment (>63 μm) and depleted in organic matter, has a weak capacity to trap Hg in the river channel and the stock of Hg is low (4 mg m−2) showing that the residence time of Hg in this river is short.  相似文献   

19.
Copper and iron skarn deposits are economically important types of skarn deposits throughout the world, especially in China, but the differences between Cu and Fe skarn deposits are poorly constrained. The Edong ore district in southeastern Hubei Province, Middle–Lower Yangtze River metallogenic belt, China, contains numerous Fe and Cu–Fe skarn deposits. In this contribution, variations in skarn mineralogy, mineralization-related intrusions and sulfur isotope values between these Cu–Fe and Fe skarn deposits are discussed.The garnets and pyroxenes of the Cu–Fe and Fe skarn deposits in the Edong ore district share similar compositions, i.e., dominantly andradite (Ad29–100Gr0–68) and diopside (Di54–100Hd0–38), respectively. This feature indicates that the mineral compositions of skarn silicate mineral assemblages were not the critical controlling factors for variations between the Cu–Fe and Fe skarn deposits. Intrusions associated with skarn Fe deposits in the Edong ore district differ from those Cu–Fe skarn deposits in petrology, geochemistry and Sr–Nd isotope. Intrusions associated with Fe deposits have large variations in their (La/Yb)N ratios (3.84–24.6) and Eu anomalies (δEu = 0.32–1.65), and have relatively low Sr/Y ratios (4.2–44.0) and high Yb contents (1.20–11.8 ppm), as well as radiogenic Sr–Nd isotopes (εNd(t) = − 12.5 to − 9.2) and (87Sr/86Sr)i = 0.7067 to 0.7086. In contrast, intrusions associated with Cu–Fe deposits are characterized by relatively high Sr/Y (35.0–81.3) and (La/Yb)N (15.0–31.6) ratios, low Yb contents (1.00–1.62 ppm) without obvious Eu anomalies (δEu = 0.67–0.97), as well as (87Sr/86Sr)i = 0.7055 to 0.7068 and εNd(t) = − 7.9 to − 3.4. Geochemical evidence indicates a greater contribution from the crust in intrusions associated with Fe skarn deposits than in intrusions associated with Cu–Fe skarn deposits. In the Edong ore district, the sulfides and sulfates in the Cu–Fe skarn deposits have sulfur isotope signatures that differ from those of Fe skarn deposits. The Cu–Fe skarn deposits have a narrow range of δ34S values from − 6.2‰ to + 8.7‰ in sulfides, and + 13.2‰ to + 15.2‰ in anhydrite, while the Fe skarn deposits have a wide range of δ34S values from + 10.3‰ to + 20.0‰ in pyrite and + 18.9‰ to + 30.8‰ in anhydrite. Sulfur isotope data for anhydrite and sedimentary country rocks suggest that the formation of skarns in the Edong district involved the interaction between magmatic fluids and variable amounts of evaporites in host rocks.  相似文献   

20.
Between March 2008 and August 2009, 65,445 tonnes of ∼75 mol% CO2 gas were injected in a depleted natural gas reservoir approximately 2000 m below surface at the Otway project site in Victoria, Australia. Groundwater flow and composition were monitored biannually in two overlying aquifers between June 2006 and March 2011, spanning the pre-, syn- and post-injection periods. The shallower (∼0–100 m), unconfined, porous and karstic aquifer of the Port Campbell Limestone and the deeper (∼600–900 m), confined and porous aquifer of the Dilwyn Formation contain valuable fresh to brackish water resources. Groundwater levels in either aquifer have not been affected by the drilling, pumping and injection activities that were taking place, or by the rainfall increase during the project. In terms of groundwater composition, the Port Campbell Limestone groundwater is brackish (electrical conductivity = 801–3900 μS cm−1), cool (temperature = 12.9–22.5 °C), and near-neutral (pH = 6.62–7.45), whilst the Dilwyn Aquifer groundwater is fresher (electrical conductivity = 505–1473 μS cm−1), warmer (temperature = 42.5–48.5 °C), and more alkaline (pH = 7.43–9.35). Carbonate dissolution, evapotranspiration and cation exchange control the composition of the groundwaters. Comparing the chemical and isotopic composition of the groundwaters collected before, during and after injection shows no statistically significant changes; even if they were statistically significant, they are mostly not consistent with those expected if CO2 addition had taken place. The monitoring program reveals no impact on the groundwater resources attributable to the C storage demonstration project.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号