首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 23 毫秒
1.
Miocene strata of the Shadow Valley Basin rest unconformably on the upper plate of the Kingston Range - Halloran Hills detachment fault system in the eastern Mojave desert, California. Basin development occurred in two broad phases that we interpret as a response to changes in footwall geometry. In southern portions of the basin, south of the Kingston Range, phase one began with near synchronous initiation of detachment faulting, volcanism and basin sedimentation shortly after 13.4 Ma. Between c. 13.4 and c. 10 Ma, concordantly bedded phase one strata were deposited onto the subsiding hangingwall of the detachment fault as it was translated 5–9 km south-westward with only limited internal deformation. Phase two (c. 10 to 8–5 Ma) is marked by extensional dismemberment of the detachment fault's upper plate along predominantly west-dipping normal faults. Phase two sediments were deposited synchronously with upper-plate normal faulting and unconformably overlie phase one deposits, displaying progressive shallowing in dip and intraformational onlap. Northern portions of the basin, in the Kingston Range, experienced a similar two-phase development compressed into a shorter interval of time. Here, phase one occurred between c. 13.4 and 12.8–12.5 (?) Ma, whereas phase two probably lasted for no more than a few 100000 years immediately prior to c. 12.4 Ma. Differences in the duration of basin development in and south of the Kingston Range apparently relate to position with respect to the detachment fault's breakaway; northern basin exposures overlie the upper plate adjacent to the breakaway (0–15 km) whereas southern basin exposures occur far from the breakaway (20–40 km). We interpret the phase one to phase two transition as recording breakup of the detachment fault's hangingwall during footwall uplift. We propose a model for supradetachment basin evolution in which early, concordantly bedded basin strata are deposited on the hangingwall as it translates intact above a weakly deforming footwall. With continuing extension, tectonic denudation along the detachment fault leads to an increasing flexural isostatic footwall response. We suggest that isostatic footwall uplift may drive internal breakup of the upper plate as the detachment fault is rotated to a shallow dip, mechanically unfavourable for simple upper-plate translation. Additionally, we argue that continuing hangingwall thinning during phase two places geometrical constraints on the timing, amount and, thus, rate of footwall uplift. Kinematically determined footwall uplift rates (0.5–4.5 mm/yr) are comparable with rates determined independently by thermochronological and geobarometric methods.  相似文献   

2.
ABSTRACT The formation of the North Croatian Basin, which represents the south-western marginal part of the Pannonian Basin System and the Central Paratethys Bioprovince, began during Ottnangian time (early Miocene) by continental rifting. The syn-rift phase lasted until the middle Badenian (middle Miocene), and resulted in the formation of elongated half-grabens characterized by large sediment thicknesses strongly influenced by tectonics and gradually increasing volcanism. Towards the end of the syn-rift phase sinistral strike-slip faulting took place, transverse to oblique to the master faults, which disintegrated the longitudinal structures contemporaneously with volcanic activity. The depositional environments gradually changed from alluvial and lacustrine to marine. The syn- to post-rift boundary was characterized by significant erosion of the uplift fault block footwalls. The post-rift phase extended from the middle Badenian to the end of the Pontian (latest Miocene). Tectonic influence drastically decreased, volcanism ceased, and subsidence of the basin was controlled predominantly by cooling of the lithosphere. Marine connections gradually decreased, resulting in a transition from marine to brackish, 'caspi-brackish' and finally fluvial-marsh environments. By the end of the Miocene the basin was finally infilled. The basin evolution was also complicated by an alternation of phases of extension and compression.  相似文献   

3.
The Oligo-Miocene Most Basin is the largest preserved sedimentary basin within the Eger Graben, the easternmost part of the European Cenozoic Rift System (ECRIS). The basin is interpreted as a part of an incipient rift system that underwent two distinct phases of extension. The first phase, characterised by NNE–SSW- to N–S-oriented horizontal extension between the end of Eocene and early Miocene, was oblique to the rift axis and caused evolution of a fault system characterised by en-échelon-arranged E–W (ENE–WSW) faults. These faults defined a number of small, shallow initial depocentres of very small subsidence rates that gradually merged during the growth and linkage of the normal fault segments. The youngest part of the basin fill indicates accelerated subsidence caused probably by the concentration of displacement at several major bounding faults. Major post-depositional faulting and forced folding were related to a change in the extension vector to an orthogonal position with respect to the rift axis and overprinting of the E–W faults by an NE–SW normal fault system. The origin of the palaeostress field of the earlier, oblique, extensional phase remains controversial and can be attributed either to the effects of the Alpine lithospheric root or (perhaps more likely because of the dominant volcanism at the onset of Eger Graben formation) to doming due to thermal perturbation of the lithosphere. The later, orthogonal, extensional phase is explained by stretching along the crest of a growing regional-scale anticlinal feature, which supports the recent hypothesis of lithospheric folding in the Alpine–Carpathian foreland.  相似文献   

4.
In the northwestern sector of the Zagros foreland basin, axial fluvial systems initially delivered fine-grained sediments from northwestern source regions into a contiguous basin, and later transverse fluvial systems delivered coarse-grained sediments from northeastern sources into a structurally partitioned basin by fold-thrust deformation. Here we integrate sedimentologic, stratigraphic, palaeomagnetic and geochronologic data from the northwestern Zagros foreland basin to define the Neogene history of deposition and sediment routing in response to progressive advance of the Zagros fold-thrust belt. This study constrains the depositional environments, timing of deposition and provenance of nonmarine clastic deposits of the Injana (Upper Fars), Mukdadiya (Lower Bakhtiari) and Bai-Hasan (Upper Bakhtiari) Formations in the Kurdistan region of Iraq. Sediments of the Injana Formation (~12.4–7.75 Ma) were transported axially (orogen-parallel) from northwest to southeast by meandering and low-sinuosity channel belt system. In contrast, during deposition of the Mukdadiya Formation (~7.75–5 Ma), sediments were delivered transversely (orogen-perpendicular) from northeast to southwest by braided and low-sinuosity channel belt system in distributive fluvial megafans. By ~5 Ma, the northwestern Zagros foreland basin became partitioned by growth of the Mountain Front Flexure and considerable gravel was introduced in localized alluvial fans derived from growing topographic highs. Foredeep accumulation rates during deposition of the Injana, Mukdadiya and Bai-Hasan Formations averaged 350, 400 and 600 m/Myr respectively, suggesting accelerated accommodation generation in a rapidly subsiding basin governed by flexural subsidence. Detrital zircon U-Pb age spectra show that in addition to sources of Mesozoic-Cenozoic cover strata, the Injana Formation was derived chiefly from Palaeozoic-Precambrian (including Carboniferous and latest Neoproterozoic) strata in an axial position to the northwest, likely from the Bitlis-Puturge Massif and broader Eastern Anatolia. In contrast, the Mukdadiya and Bai-Hasan Formations yield distinctive Palaeogene U-Pb age peaks, particularly in the southeastern sector of the study region, consistent with transverse delivery from the arc-related terranes of the Walash and Naopurdan volcano-sedimentary groups (Gaveh-Rud domain?) and Urumieh-Dokhtar magmatic arc to the northeast. These temporal and spatial variations in stratigraphic framework, depositional environments, sediment routing and compositional provenance reveal a major drainage reorganization during Neogene shortening in the Zagros fold-thrust belt. Whereas axial fluvial systems initially dominated the foreland basin during early orogenesis in the Kurdistan region of Iraq, transverse fluvial systems were subsequently established and delivered major sediment volumes to the foreland as a consequence of the abrupt deformation advance and associated topographic growth in the Zagros.  相似文献   

5.
During the Cretaceous, the Neuquén Basin transitioned from an extensional back‐arc to a retroarc foreland basin. We present a multi‐proxy provenance study of Aptian to Santonian (125–84 Ma) continental sedimentary rocks preserved in the Neuquén Basin used to resolve changes of sediment drainage pattern in response to the change in tectonic regime. Sandstone petrology and U–Pb detrital zircon geochronology constrain the source units delivering detritus to the basin; apatite U–Pb and fission track dating further resolve provenance and determine the age and patterns of exhumation of the source rocks. Sandstone provenance records a sharp change from a mixed orogenic source during Aptian time (ca. 125 Ma), to a magmatic arc provenance in the Cenomanian (ca. 100 Ma). We interpret this provenance change as the result of the drainage pattern reorganisation from divergent to convergent caused by tectonic basin inversion. During this inversion and early stages of contraction, a transient phase of uplift and basin erosion, possibly due to continental buckling, caused the pre‐Cenomanian unconformity dividing the Lower from Upper Cretaceous strata in the Neuquén Basin. This phase was followed by the development of a retroarc foreland basin characterised by a volcanic arc sediment provenance progressively shifting to a mixed continental basement provenance during Turonian‐Santonian (90–84). According to multi‐proxy provenance data and lag times derived from apatite fission track analysis, this trend is the result of a rapidly exhuming source within the Cordillera to the west, in response to active compressional tectonics along the western margin of South America, coupled with the increasing contribution of material from the stable craton to the east; this contribution is thought to be the result of the weak uplift and exhumation of the foreland due to eastward migration of the forebulge.  相似文献   

6.
The intermontane Quebrada de Humahuaca Basin (Humahuaca Basin) in the Eastern Cordillera of the southern Central Andes of NW Argentina (23°–24°S) records the evolution of a formerly contiguous foreland‐basin setting to an intermontane depositional environment during the late stages of Cenozoic Andean mountain building. This basin has been and continues to be subject to shortening and surface uplift, which has resulted in the establishment of an orographic barrier for easterly sourced moisture‐bearing winds along its eastern margin, followed by leeward aridification. We present new U–Pb zircon ages and palaeocurrent reconstructions suggesting that from at least 6 Ma until 4.2 Ma, the Humahuaca Basin was an integral part of a largely contiguous depositional system that became progressively decoupled from the foreland as deformation migrated eastward. The Humahuaca Basin experienced multiple cycles of severed hydrological conditions and subsequent re‐captured drainage, fluvial connectivity with the foreland and sediment evacuation. Depositional and structural relationships among faults, regional unconformities and deformed landforms reveal a general pattern of intrabasin deformation that appears to be associated with different cycles of alluviation and basin excavation in which deformation is focused on basin‐internal structures during or subsequent to phases of large‐scale sediment removal.  相似文献   

7.
The tectonic evolution of the Tian Shan, as for most ranges in continental Asia is dominated by north‐south compression since the Cenozoic India‐Asia collision. However, precollision governing tectonic processes remain enigmatic. An excellent record is provided by thick Palaeozoic – Cenozoic lacustrine to fluvial depositional sequences that are well preserved in the southern margin of the Junggar Basin and exposed along a foreland basin associated to the Late Cenozoic rejuvenation of the Tian Shan ranges. U/Pb (LA‐ICP‐MS) dating of detrital zircons from 14 sandstone samples from a continuous series ranging in age from latest Palaeozoic to Quaternary is used to investigate changes in sediment provenance through time and to correlate them with major tectonic phases in the range. Samples were systematically collected along two nearby sections in the foreland basin. The results show that the detrital zircons are mostly magmatic in origin, with some minor input from metamorphic zircons. The U‐Pb detrital zircon ages range widely from 127 to 2856 Ma and can be divided into four main groups: 127–197 (sub‐peak at 159 Ma), 250–379 (sub‐peak at 318 Ma), 381–538 (sub‐peak at 406 Ma) and 543–2856 Ma (sub‐peak at 912 Ma). These groups indicate that the zircons were largely derived from the Tian Shan area to the south since a Late Carboniferous basin initiation. The provenance and basin‐range pattern evolution of the southern margin of Junggar Basin can be generally divided into four stages: (1) Late Carboniferous – Early Triassic basin evolution in a half‐graben or post‐orogenic extensional context; (2) From Middle Triassic to Upper Jurassic times, the southern Junggar became a passively subsiding basin until (3) being inverted during Lower Cretaceous – Palaeogene; (4) During the Neogene, a piedmont developed along the northern margin of the North Tian Shan block and Junggar Basin became a true foreland basin.  相似文献   

8.
We integrated new field observations, two-dimensional (2-D) seismic profiles and new and previously reported chronological data to understand the effects of pre-orogenic structures on the tectonic evolution of the Salar de Punta Negra in the Central Andes. For first time a series of restored geological cross-sections are presented, thus showing the pre-orogenic tectonic architecture of the region and new ideas about the tectonic evolution of the inner forearc of the Central Andes. Our results show a series of east-dipping normal faults as the main pre-orogenic structures in the region, which resulted from lithospheric stretching of the western continental margin during the Paleozoic to Mesozoic (Triassic–Jurassic). These were later incorporated into the Andean orogen by tectonic inversion, forming west-verging inversion anticlines. The beginning of the tectonic inversion is constrained by the first on-lap of the Upper Cretaceous-Palaeocene syn-kinematic deposits on the top of the Mesozoic syn-rift successions, highlighting that inversion occurred during this period. These syn-kinematic deposits display zircons with older age peaks between ca. 200 and 300 Ma, thus indicating that some Carboniferous to Triassic sources of sediments were eroded during the uplift of the orogen. Other basement reverse faults affect the footwalls of normal inverted faults and the shoulders of ancient half-graben structures. These truncate and decapitate previous inverted faults and completely cut the infill of the basin, leading to exhumation of the pre-rift basement rocks. We propose that the propagation of these structures was favoured by the modified thermal-tectonic state of the lithosphere from the eastward migration of the volcanic arc, and not by the previous pre-orogenic structures. The structural and stratigraphic relationships recognized both in the field and 2-D seismic profiles indicate that many reverse faults originated after the initial tectonic inversion and continued to be active from the Eocene until the Pleistocene period.  相似文献   

9.
This integrated study (field observations, micropalaeontology, magnetostratigraphy, geochemistry, borehole data and seismic profiles) of the Messinian–Zanclean deposits on Zakynthos Island (Ionian Sea) focuses on the sedimentary succession recording the pre‐evaporitic phase of the Messinian salinity crisis (MSC) through the re‐establishment of the marine conditions in a transitional area between the eastern and the western Mediterranean. Two intervals are distinguished through the palaeoenvironmental reconstruction of the pre‐evaporitic Messinian in Kalamaki: (a) 6.45–6.122 Ma and (b) 6.122–5.97 Ma. Both the planktonic foraminifer and the fish assemblages indicate a cooling phase punctuated by hypersalinity episodes at around 6.05 Ma. Two evaporite units are recognized and associated with the tectonic evolution of the Kalamaki–Argassi area. The Primary Lower Gypsum (PLG) unit was deposited during the first MSC stage (5.971–5.60 Ma) in late‐Messinian marginal basins within the pre‐Apulian foreland basin and in the wedge‐top (<300 m) developed over the Ionian zone. During the second MSC stage (5.60–5.55 Ma), the PLG evaporites were deeply eroded in the forebulge–backbulge and the wedge‐top areas, and supplied the foreland basin's depocentre with gypsum turbidites assigned to the Resedimented Lower Gypsum (RLG) unit. In this study, we propose a simple model for the Neogene–Pliocene continental foreland‐directed migration of the Hellenide thrusting, which explains the palaeogeography of the Zakynthos basin. The diapiric movements of the Ionian Triassic evaporites regulated the configuration and the overall subsidence of the foreland basin and, therefore, the MSC expression in this area.  相似文献   

10.
Important aspects of the Andean foreland basin in Argentina remain poorly constrained, such as the effect of deformation on deposition, in which foreland basin depozones Cenozoic sedimentary units were deposited, how sediment sources and drainages evolved in response to tectonics, and the thickness of sediment accumulation. Zircon U‐Pb geochronological data from Eocene–Pliocene sedimentary strata in the Eastern Cordillera of northwestern Argentina (Pucará–Angastaco and La Viña areas) provide an Eocene (ca. 38 Ma) maximum depositional age for the Quebrada de los Colorados Formation. Sedimentological and provenance data reveal a basin history that is best explained within the context of an evolving foreland basin system affected by inherited palaeotopography. The Quebrada de los Colorados Formation represents deposition in the distal to proximal foredeep depozone. Development of an angular unconformity at ca. 14 Ma and the coarse‐grained, proximal character of the overlying Angastaco Formation (lower to upper Miocene) suggest deposition in a wedge‐top depozone. Axial drainage during deposition of the Palo Pintado Formation (upper Miocene) suggests a fluvial‐lacustrine intramontane setting. By ca. 4 Ma, during deposition of the San Felipe Formation, the Angastaco area had become structurally isolated by the uplift of the Sierra de los Colorados Range to the east. Overall, the Eastern Cordillera sedimentary record is consistent with a continuous foreland basin system that migrated through the region from late Eocene through middle Miocene time. By middle Miocene time, the region lay within the topographically complex wedge‐top depozone, influenced by thick‐skinned deformation and re‐activation of Cretaceous rift structures. The association of the Eocene Quebrada del los Colorados Formation with a foredeep depozone implies that more distal foreland deposits should be represented by pre‐Eocene strata (Santa Barbara Subgroup) within the region.  相似文献   

11.
Mantle-induced dynamic topography (i.e., subsidence and uplift) has been increasingly recognized as an important process in foreland basin development. However, characterizing and distinguishing the effects (i.e., location, extent and magnitude) of dynamic topography in ancient foreland basins remains challenging because the spatio-temporal footprint of dynamic topography and flexural topography (i.e., generated by topographic loading) can overlap. This study employs 3D flexural backstripping of Upper Cretaceous strata in the central part of the North American Cordilleran foreland basin (CFB) to better quantify the effects of dynamic topography. The extensive stratigraphic database and good age control of the CFB permit the regional application of 3D flexural backstripping in this basin for the first time. Dynamic topography started to influence the development of the CFB during the late Turonian to middle Campanian (90.2–80.2 Ma) and became the dominant subsidence mechanism during the middle to late Campanian (80.2–74.6 Ma). The area influenced by >100 m dynamic subsidence is approximately 400 by 500 km, within which significant (>200 m) dynamic subsidence occurs in an irregular-shaped (i.e., lunate) subregion. The maximum magnitude of dynamic subsidence is 300 ± 100 m based on the 80.2–74.6 Ma tectonic subsidence maps. With the maximum magnitude of dynamic uplift being constrained to be 200–300 m, the gross amount of dynamic topography in the Late Cretaceous CFB is 500–600 m. Although the location of dynamic subsidence revealed by tectonic subsidence maps is generally consistent with isopach map trends, tectonic subsidence maps developed through 3D flexural backstripping provide more accurate constraints of the areal extent, magnitude and rate of dynamic topography (as well as flexural topography) in the CFB through the Late Cretaceous. This improved understanding of dynamic topography in the CFB is critical for refining current geodynamic models of foreland basins and understanding the surface expression of mantle processes.  相似文献   

12.
The spatial and temporal organization of depositional environments in drainage networks of foreland basins reflect the tectonic and erosional dynamics associated with the development of mountain belts. We provide field evidences for the initiation and evolution of a complex drainage system in the French South Alpine Foreland Basin related to Western Alps exhumation. Sedimentological and structural analyses of the Eocene–Early Miocene succession were investigated in the (1) Argens/Peyresq, (2) Barrême/Blieux/Taulanne and (3) Montmaur/St‐Disdier sectors. Combined with the existing structural data set, we propose a new model that integrates the regional tectonic activity, the palaeovalley orientation and their dynamics through time. The Eocene–Miocene deposits clearly show the existence of N–S‐oriented palaeovalleys. The systematic presence of early NE–SW‐ to N–S‐oriented strike‐slip and extensional faults in the palaeovalleys suggests that these tectonic structures were responsible for the formation of the initial N–S‐oriented basin‐floor topographies. The vertical offset of the strike‐slip faults induced sufficient accommodation space for the Cenozoic sedimentation since the Middle Eocene. It implies the creation of N–S‐oriented palaeovalleys during the northward Pyrenean‐Provençal phase, pre‐dating westward Alpine compression. Later, the Oligocene Alpine tectonic phase induced drainage expansion toward the orogenic wedge and the erosion of the exhumed internal massifs by transverse streams. The establishment of new connections between the old topographic lows formed a longitudinal drainage pattern that remains the locus of deposition in a regional sedimentary routing system. In this model, former strike‐slip faults correspond to weakness zones overprinted by the westward Alpine shortening that allowed the formation of the modern piggyback basin structure of the foreland and the long‐time preservation of the palaeovalley geometry.  相似文献   

13.
The lateral propagation of faults and folds is known to be an important process during the development of mountain belts, but little is known about the manner in which along‐strike fault–fold growth is expressed in pre‐ and syntectonic (growth) strata. We use a coupled tectonic and stratigraphic model to investigate the along‐strike stratigraphic expression of fault‐related folds/uplifts that grow in both the transport and strike directions. We consider faults that propagate following a quadratic (nonself‐similar evolution) or linear (self‐similar evolution) scaling law, using different slip distributions per episode of fault propagation, under general background sedimentation. We find that the long‐strike geometry of pre‐ and syntectonic strata and the geometry of growth axial surfaces reflect the mode of fault propagation. The geometry of strata observed in the model is similar to that observed in natural contractional structures when: (1) the evolution of the fault is nonself‐similar, or (2) the fault grows as a result of thrust faulting events with similar displacements along strike that are terminated abruptly at the fault tips.  相似文献   

14.
The outer Adriatic zones of the central Apennines (Italy) provide good conditions for analysing geometry and kinematics of the earliest normal faults, superposed onto the thrust belt. During the latest stages of thrusting onto the Adriatic foreland (late Pliocene–early Pleistocene), the outermost imbricates of the thrust belt were subjected to normal faulting, coeval with differential uplift. Crosscutting normal faults get younger towards the foreland, thus the easternmost normal faults record the latest stages of fault propagation and growth. The Caramanico fault, on the western flank of Mt. Maiella, is the largest outcropping normal fault of the outer zones. This high‐angle fault (dip > 70°) has cumulative offsets ≤ €4.2 km, and propagated with slip rates of 2.6 mm/year in a short time interval (≤ 1.6 Ma), concomitant with intense uplift of Mt. Maiella. In contrast with normal faults in a more internal position, the Caramanico fault maintains a high‐angle planar geometry, and does not reach the major basal detachment of the thrust belt. Thus the fault did not cause large extensional displacements; its major role was rather to accommodate ongoing components of vertical uplift of the overthickened thrust wedge. Downfaulting of the thrust belt on the western flank of Mt. Maiella represents the youngest end member of the same processes that have operated since 11 Ma in the Tyrrhenian hinterland, where large extensional strains and crustal thinning of the orogenic belt were achieved by long‐lasting activity of listric normal faults detached at lower crustal depths.  相似文献   

15.
Reactivation of intraplate structures and weak zones within the foreland lithosphere disrupt the modelled geometry and pattern of migration of the flexural wave in foreland basins. In the southern Appalachians (USA), the Middle Ordovician unconformity, irregular Middle Ordovician distal foreland deposition and backstepping of Middle–lower Upper Ordovician carbonate strata have been related to migration of the flexural wave. However, integration of stratigraphy, tectonic subsidence history and composition of palinspastically restored distal foreland strata, using a map of subsurface basement structures as reference, allows us to distinguish an early event of inversion from two events of flexural migration. Sections restoring at very short distances outside the boundaries of a former basement graben have the youngest passive‐margin strata preserved beneath Middle Ordovician (～466 Ma) peritidal to deep lagoonal carbonates with gravel‐size chert clasts. In contrast, sections restoring inside the graben record >470 m of truncation of pre‐Middle Ordovician passive‐margin strata, late onset of deposition (～456 Ma), and subaerial features in carbonate and siliciclastic strata. The lacuna geometry and early patterns of distal foreland uplift and carbonate deposition indicate that inversion of a basement graben in response to Middle Ordovician convergence, rather than a migrating or semi‐fixed forebulge, was the primary control on the early evolution of the distal foreland. Drowning of the carbonate platform in more proximal settings, northeastward onset of deposition on upthrown blocks, and thick accumulation of carbonates in downthrown blocks record northwestward and northeastward flexural wave migration at the Middle–Late Ordovician boundary. In early Late Ordovician, the overall shoaling of carbonate and siliciclastic depocentres and the rise of tectonic subsidence curves indicate hinterlandward migration of flexural uplift. Both events of flexural migration were accompanied by influx of volcanic ash and synorogenic sediments.  相似文献   

16.
The Santa Rosa basin of northeastern Baja California is one of several transtensional basins that formed during Neogene oblique opening of the Gulf of California. The basin comprises Late Miocene to Pleistocene sedimentary and volcanic strata that define an asymmetric half‐graben above the Santa Rosa detachment, a low‐angle normal fault with ca. 4–5 km of SE‐directed displacement. Stratigraphic analysis reveals systematic basin‐scale facies variations both parallel and across the basin. The basin‐fill exhibits an overall fining‐upward cycle, from conglomerate and breccia at the base to alternating sandstone‐mudstone in the depocentre, which interfingers with the fault‐scarp facies of the detachment. Sediment dispersal was transverse‐dominated and occurred through coalescing alluvial fans from the immediate hanging wall and/or footwall of the detachment. Different stratigraphic sections reveal important lateral facies variations that correlate with major corrugations of the detachment fault. The latter represent extension‐parallel folds that formed largely in response to the ca. N‐S constrictional strain regime of the transtensional plate boundary. The upward vertical deflection associated with antiformal folding dampened subsidence in the northeastern Santa Rosa basin, and resulted in steep topographic gradients with a high influx of coarse conglomerate here. By contrast, the downward motion in the synform hinge resulted in increased subsidence, and led to a southwestward migration of the depocentre with time. Thus, the Santa Rosa basin represents a new type of transtensional rift basin in which oblique extension is partitioned between diffuse constriction and discrete normal faulting. 40Ar/39Ar geochronology of intercalated volcanic rocks suggests that transtensional deformation began during the Late Miocene, between 9.36 ± 0.14 Ma and 6.78 ± 0.12 Ma, and confirms previous results from low‐temperature thermochronology (Seiler et al., 2011). Two other volcanic units that appear to be part of a conformable syn‐rift sequence are, in fact, duplicates of pre‐rift volcanics and represent allochthonous, gravity‐driven slide blocks that originated from the hanging wall.  相似文献   

17.
Three successive zones of fault‐related folds disrupt the proximal part of the northern Tian Shan foreland in NW China. A new magnetostratigraphy of the Taxi He section on the north limb of the Tugulu anticline in the middle deformed zone clarifies the chronology of both tectonic deformation and depositional evolution of this collisional mountain belt. Our ～1200‐m‐thick section encompasses the upper Cenozoic terrigenous sequence within which ～300 sampling horizons yield an age span of ～8–2 Ma. Although the basal age in the Taxi He section of the Xiyu conglomerate (often cited as an indicator of initial deformation) is ～2.1 Ma, much earlier growth of the Tugulu anticline is inferred from growth strata dated at ～6.0 Ma. Folding of Neogene strata and angular unconformities in anticlines in the more proximal and distal deformed zones indicate deformation during Miocene and Early Pleistocene times, respectively. In the Taxi He area, sediment‐accumulation rates significantly accelerate at ～4 Ma, apparently in response to encroaching thrust loads. Together, growth strata, angular unconformities, and sediment‐accumulation rates document the northward migration of tectonic deformation into the northern Tian Shan foreland basin during the late Cenozoic. A progradational alluvial–lacustrine system associated with this northward progression is subdivided into two facies associations at Tugulu: a shallow lacustrine environment before ～5.9 Ma and an alluvial fan environment subsequently. The lithofacies progradation encompasses the time‐transgressive Xiyu conglomerate deposits, which should only be recognized as a lithostratigraphic unit. Along the length of the foreland, the locus of maximum shortening shifts between the medial and proximal zones of folding, whereas the total shortening across the foreland remains quite homogeneous along strike, suggesting spatially steady tectonic forcing since late Miocene times.  相似文献   

18.
The western North China Craton (W-NCC) comprises the Alxa Terrane in the west and the Ordos Block in the east; they are separated by the Helanshan Tectonic Belt (HTB). There is an extensive debate regarding the significant Ordovician tectonic setting of the W-NCC. Most paleogeographic reconstructions emphasized the formation and rapid subsidence of an aulacogen along the HTB during the Middle–Late Ordovician, whereas paleomagnetic and geochronologic results suggested that the Alxa Terrane and the Ordos Block were independent blocks separated by the HTB. In this study, stratigraphic and geochronologic methods were used to constrain the Ordovician tectonic processes of the W-NCC. Stratigraphic correlations show that the Early Ordovician strata comprise ~500-m-thick tidal flat and lagoon carbonate successions with a progressive eastward onlap, featuring a west-deepening shallow-water carbonate shelf. In contrast, the Late Ordovician strata are composed of ~3,000-m-thick abyssal turbidites in the west and ~400-m-thick shallow-water carbonates in the east, defining an eastward-tapering basin architecture. Early Ordovician detrital zircons with ages of ~2,800–1,700 Ma were derived from the Ordos Block; the Late Ordovician turbidites were sourced from the western Alxa Terrane, based on zircon ages clustered at ~1,000–900 Ma. The petrographic modal composition and zircon age distribution imply a provenance shift from a stable craton to a recycled orogen in the Middle Ordovician. These shifts define a tectonic conversion from a passive continental margin to a foreland basin at ~467 Ma, resulting in the eastward progradation of the turbidite wedge around the HTB, the eastward backstepping of the carbonate platform in the east and the eastward expansion of orogenic thrusting in the western Alxa Terrane. This tectono-sedimentary shift coincided with the advancing subduction of the southern Paleo-Asian Ocean beneath the Alxa Terrane, generating the western Alxa continental arc and the paired retro-arc foredeep in the east under a compressional tectonic regime.  相似文献   

19.
Knowledge of the permeability structure of fault‐bearing reservoir rocks is fundamental for developing robust hydrocarbon exploration and fluid monitoring strategies. Studies often describe the permeability structure of low porosity host rocks that have experienced simple tectonic histories, while investigations of the influence of faults with multiple‐slip histories on the permeability structure of porous clastic rocks are limited. We present results from an integrated petrophysical, microstructural, and mineralogical investigation of the Eumeralla Formation (a tight volcanogenic sandstone) within the hanging wall of the Castle Cove Fault which strikes 30 km NE–SW in the Otway Basin, southeast Australia. This late Jurassic to Cenozoic‐age basin has experienced multiple phases of extension and compression. Core plugs and thin sections oriented relative to the fault plane were sampled from the hanging wall at distances of up to 225 m from the Castle Cove Fault plane. As the fault plane is approached, connected porosities increase by ca. 10% (17% at 225 m to 24% at 0.5 m) and permeabilities increase by two orders of magnitude (from 0.04 mD at 225 m to 1.26 mD at 0.5 m). Backscattered Scanning Electron Microscope analysis shows that microstructural changes due to faulting have enhanced the micrometre‐scale permeability structure of the Eumeralla Formation. These microstructural changes have been attributed to the formation of microfractures and destruction of original pore‐lining chlorite morphology as a result of fault deformation. Complex deformation, that is, formation of macrofractures, variably oriented microfractures, and a hanging wall anticline, associated with normal faulting and subsequent reverse faulting, has significantly influenced the off‐fault fluid flow properties of the protolith. However, despite enhancement of the host rock permeability structure, the Eumeralla Formation at Castle Cove is still considered a tight sandstone. Our study shows that high‐resolution integrated analyses of the host rock are critical for describing the micrometre‐scale permeability structure of reservoir rocks with high porosities, low permeabilities, and abundant clays that have experienced complex deformation.  相似文献   

20.
Miocene strata in the southern Taranaki Basin (STB), up to 3 km thick, provide a distal record of erosion associated with plate boundary deformation in New Zealand. 2D and 3D seismic reflection data tied to drillhole stratigraphy have been used to constrain four main phases of basin development. These are: (a) Early Miocene (22–19 Ma) subsidence, dominantly bathyal water depths and deposition of minor submarine fans along the eastern basin margin. (b) Middle Miocene (19–14 Ma) widespread submarine fan deposition on a bathyal basin floor in the central STB. (c) Rapid Middle–Late Miocene (14–7 Ma) progradation of the shelf break northwards across the STB. (d) Widespread uplift and erosion of the STB during the latest Miocene–Pliocene (7–4.5 Ma). Bathyal water depths and fan deposition in the Early Miocene were influenced by vertical motions on major reverse faults and regional subsidence produced by subduction of the Pacific plate beneath northern New Zealand. Subsequent submarine fan deposition and northward shelf‐break progradation reflect increasing input of terrigenous material, primarily eroded from an uplifting region to the south of the STB. Sedimentation patterns in the STB are consistent with the age and locations of conglomerates deposited in onshore West Coast basins, related to this uplift and erosion. Sediment transport in the West Coast region was mainly parallel to NNE trending active reverse faults, and in the STB was perpendicular to the NE‐SW orientated shelf break, especially from ca. 14–7 Ma, when sedimentation rates exceeded fault‐displacement rates. Increases in sedimentation rates in the STB coincide with regional increases in the rates of shortening that appear to reflect plate boundary‐wide events and have been attributed to, or correlated with, increases in the plate convergence rate. Miocene sedimentation patterns in the STB thus reflect both intra‐basinal deformation and tectonic signals from the wider developing New Zealand plate boundary.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号