共查询到20条相似文献，搜索用时 15 毫秒
1.
This study aims at exploring the void space gas effect of earthquake-triggered slope instability and providing a new method for studying the formation mechanism of earthquake-triggered landslides. We analysed the basic characteristics, kinematic characteristics, initiation mechanisms and physical mechanical parameters of the Daguangbao landslide, generalized a landslide prototype, and established a geological model and performed simulation tests. Based on the seismic wave propagation theory of rock-soil mass, rock fracture mechanics and the effective stress principle, we found that the void space gas effect is due to the occurrence of excess void space gas pressure when the dynamic response of seismic loads impacts the void space gas in weak intercalated layers of the slope. The excess void space gas pressure generated by the vibration(earthquake) damages the rock mass around the void space with a certain regularity. The model test results show that the effective shear strength of the rock mass can be reduced by 4.4% to 21.6% due to the void space gas effect. 相似文献
2.
《山地科学学报》2018,(11)
Shallow slope failures induced by rainfall infiltration occur frequently, and the relevant triggering mechanisms have been widely studied.Rainfall-induced landslides are widely recognized to be caused by increases in soil weight, seepage force and pore water pressure or decreases in soil mechanical properties. However, even when all these factors are considered, some landslides still cannot be explained well. The increased pore water pressure in a slope reduces the effective stress of the soil and may trigger slope failure. Similarly, the pore gas pressure in a slope also reduces the effective stress of the soil but has been neglected in previous studies. As the viscosity of air is nearly negligible when compared with that of water, the pore gas pressure spreads faster, and its influence is wider, which is harmful for the stability of the slope. In this paper, the effects of pore gas pressure are considered in a shallow slope stability analysis, and a self-designed experiment is conducted to validate the force transfer mechanism.Numerical simulation results show that the pore gas pressure in the slope increases sharply at different locations under heavy rainfall conditions and that the pore gas pressure causes a rapid decrease in the slope safety factor. Laboratory experimental results show that the pore gas pressure throughout the whole unsaturated zone has the same value, which indicates that the gas pressure could spread quickly to the whole sample. 相似文献
3.
The stability of rock slope is often controlled by the existing discontinuous surfaces, such as discrete fractures, which are ubiquitously distributing in a geological medium. In contrast with the traditional approaches used in soil slope with a continuous assumption, the simulation methods of jointed rock slope are different from that of in soil slope. This paper presents a study on jointed rock slope stability using the proposed discontinuous approach, which considers the effects of discrete fractures. Comparing with traditional methods to model fractures in an implicit way, the presented approach provides a method to simulate fractures in an explicit way, where grids between rock matrix and fractures are independent. To complete geometric components generation and mesh partition for the model, the corresponding algorithms were devised. To evaluate the stability state of rock slope quantitatively, the strength reduction method was integrated into our analysis framework. A benchmark example was used to verify the validation of the approach. A jointed rock slope, which contains natural fractures, was selected as a case study and was simulated regarding the workflow of our framework. It was set up in the light of the geological condition of the site. Slope stability was evaluated under different loading conditions with various fracture patterns. Numerical results show that fractures have significant contributions to slope stability, and different fracture patterns would lead to different shapes of the slip surface. The devised method has the ability to calculate a non-circular slip surface, which is different from a circular slip surface obtained by classical methods. 相似文献
4.
Cuiling Xu Jens Greinert Matthias Haeckel Jörg Bialas Lyubomir Dimitrov Guangtao Zhao 《中国海洋大学学报(英文版)》2018,17(3):555-562
Seafloor elongated depressions are indicators of gas seepage or slope instability. Here we report a sequence of slopeparallel elongated depressions that link to headwalls of sediment slides on upper slope. The depressions of about 250 m in width and several kilometers in length are areas of focused gas discharge indicated by bubble-release into the water column and methane enriched pore waters. Sparker seismic profiles running perpendicular and parallel to the coast, show gas migration pathways and trapped gas underneath these depressions with bright spots and seismic blanking. The data indicate that upward gas migration is the initial reason for fracturing sedimentary layers. In the top sediment where two young stages of landslides can be detected, the slopeparallel sediment weakening lengthens and deepens the surficial fractures, creating the elongated depressions in the seafloor supported by sediment erosion due to slope-parallel water currents. 相似文献
5.
Failure mechanisms of post-earthquake bedrock landslides in response to rainfall infiltration 总被引：1，自引：0，他引：1
Among the triggering factors of post-earthquake bedrock landslides,rainfall plays an important role.However,with slope variation,the mechanism of its effects on the failure of rock landslides is not clear.Here,from the viewpoint of fracture mechanics,and based on post-earthquake conditions,the mechanisms of crack propagation,water infiltration and development of the sliding surface were investigated.Then,according to the upper boundary theorem,the effects of water infiltrated into fractures on the stability of rock slopes were analyzed quantitatively.Finally,an example is presented to verify the theory.The results show that the propagation and coalescence of cracks and the lubrication of incipient sliding surfaces are the main causes of the failure of post-earthquake rock landslides in response to rainfall. 相似文献
6.
三峡库区广泛分布侏罗系红砂岩,在水库运行期间红砂岩的渗流-应力耦合特性关乎库区内多数滑坡和岩质边坡的稳定性。借助岩石多场耦合三轴试验系统,对三峡库区侏罗系红砂岩开展了不同围压、不同渗透压下的三轴压缩试验,系统研究了红砂岩的三轴压缩力学特性和渗透率演化特征。研究结果表明：(1)红砂岩的峰前应力-应变曲线可分为孔隙压密阶段、弹性变形阶段、微裂隙稳定发展阶段和非稳定发展阶段。红砂岩的力学参数与渗透压的关系呈负相关,与围压呈正相关。(2)随着围压升高,红砂岩的破坏模式由张拉破坏过渡到剪切破坏。(3)不同渗透压下,渗透率曲线呈平稳发展→缓慢上升→快速上升3阶段演化规律;不同围压下,渗透率曲线先降低后升高。(4)从能量角度分析了渗透压和围压对岩石的作用,验证了渗流对岩石的劣化效应以及围压对裂纹发展的抑制作用。本试验对鲜有报道的侏罗系红砂岩的强度、变形和渗透特性做了系统的研究,对渗流-应力耦合课题有补充意义。其工况根据三峡库区边坡岩体的应力水平来确定,试验结果对分析库区边坡稳定性具有指导意义。 相似文献
7.
Continuum and discrete element coupling approach to analyzing seismic responses of a slope covered by deposits 总被引：1，自引：1，他引：0
Numerical analyses of earthquake effects on the deformation, stability, and load transfer of a slope covered by deposits are
traditionally based on the assumption that the slope is a continuum. It would be problematic, however, to extend these approaches
to the simulation of the slide, collapse and disintegration of the deposits under seismic loading. Contrary to this, a discrete
element method (DEM) provides a means to consider large displacement and rotation of the non-continuum. To take the advantages
of both methods of continuum and non-continuum analyses, seismic responses of a slope covered by deposits are studied by coupling
a two-dimensional (2-D) finite difference method and a 2-D DEM, with the bedrock being modelled by the finite difference grids
and the deposits being represented by disks. A smooth transition across the boundaries of the continuous/discontinuous domains
is obtained by imposing the compatibility condition and equilibrium condition along their interfaces. In the course of computation,
the same time-step value is chosen for both continuous and discontinuous domains. The free-field boundaries are adopted for
lateral grids of bedrock domain to eliminate the radiation damping effect. When the static equilibrium under gravity load
is obtained, dynamic calculation begins under excitation of the seismic wave input from the continuum model bottom. In this
way, responses to the earthquake of a slope covered by deposits are analyzed dynamically. Combined with field monitoring data,
deformation and stability of the slope are discussed. The effects of the relevant parameters of spectrum characteristic, duration,
and peak acceleration of seismic waves are further investigated and explained from the simulations. 相似文献
8.
《山地科学学报》2015,(1)
The "4.20" Lushan earthquake in Sichuan province, China has induced a large amount of geological hazards and produced abundant loose materials which are prone to post-earthquake rainfalltriggered landslides. A detailed landslide inventory was acquired through post-earthquake emergent field investigation and high resolution remote sensing interpretation. The rainfall analysis was conducted using historical rainfall records during the period from 1951 to 2010. Results indicate that the average annual rainfall distribution is heterogeneous and the largest average annual rainfall occurs in Yucheng district. The Stability Index MAPping(SINMAP)model was adopted to assess and analyze the postearthquake slope stability under different rainfall scenarios(light rainfall, moderate rainfall, heavy rainfall, and rainstorm). The model parameters were calibrated to reflect the significant influence of strong earthquakes on geological settings. The slope stability maps triggered by different rainfall scenarios wereproduced at a regional scale. The effect of different rainfall conditions on the slope stability is discussed.The expanding trend of the unstable area was quantitatively assessed with the different critical rainfall intensity. They provide a new insight into the spatial distribution and characteristics of postearthquake rainfall-triggered landslides in the Lushan seismic area. An increase of rainfall intensity results in a significant increase of unstable area. The heterogeneous distribution of slope instability is strongly correlated with the distribution of earthquake intensity in spite of different rainfall conditions. The results suggest that the both seismic intensity and rainfall are two crucial factors for postearthquake slope stability. This study provides important references for landslide prevention and mitigation in the Lushan area after earthquake. 相似文献
9.
The"5.12"Wenchuan earthquake in 2008 triggered a large number of co-seismic landslides.The rear boundary or cracks of co-seismic landslide are generally located at the steep free surface of thin or thick mountains.Dynamic process of this kind of landslides could be divided into two parts:the seismic dynamic response of the slope and the movement process of rock mass.Taking the Laoyingyan rockslide as an example,the amplification effect was studied by single-degree-of-freedom system analysis method.Besides,the dynamic process of landslide under seismic loading was simulated by the finite difference method(FDM)and discrete element method(DEM).The amplification coefficient of the rockslide to seismic wave is 1.25.The results show that the critical sliding surface of the Laoyingyan rockslide was formed at the 23 th seconds under the action of seismic wave.At the same time,tension failure occurred at the rear edge of the sliding mass and shear failure occurred at the front edge.The maximum displacement was 0.81 m and the initial velocity was 2.78 m/s.During the initiation process of the rockslide,the rock mass firstly broke down along the joints which are along the dip of the rock stratum,and then collapsed bodily along the secondary structural planes.In the process of movement,the maximum velocity of rock mass was 38.24 m/s.After that,the rock mass underwent multiple collisions,including contact,deceleration to 0 and speed recovery after rebound.Finally,due to the constant loss of energy,the rocks stopped and accumulated loosely at the foot of the slope.The longest distance of movement was about 494 m.Besides,the smaller the damping ratio,the farther the rock mass moved.Compared with the results without considering the amplification factor,the movement distance of landslide by considering the amplification factor was more accurate.The study of the Laoyingyan rockslide is helpful to strengthen our field identification of potential co-seismic rockslides.At the same time,understanding its movement and accumulation process can help us better predict the hazard scope of the co-seismic rockslides,and provide a reference for the design of treatment projects. 相似文献
10.
Experimental study of motion characteristics of rock slopes with weak intercalation under seismic excitation 总被引：1，自引：0，他引：1
In order to investigate the effect of a weak intercalation on slope stability, a large-scale shaking table model test was conducted to study the dynamic response of rock slope models with weak intercalation. The dynamic response of the prototype slopes were studied in laboratory with the consideration of law of similitude. The initiation failure was observed in the rock slope model with a counter-tilt thin-weak intercalation firstly, not in the slope model with a horizontal thin-weak intercalation. Furthermore, it was interesting that the fracture site is shifted from crest top to the slope surface near the weak intercalation, which is different with the location of failure position in a normal layered slope. We also discussed the effect of the dip angle and the thickness of weak intercalation on the failure mechanism and instability mode of the layered rock slope. From the experimental result, it was noted that the stability of the slope with a counter-tilt weak intercalation could be worse than that of the other slopes under seismic excitation. The findings showed the difference of failure in slopes with a horizontal and counter weak intercalation, and implicated the further evaluation of failure of layered slopes caused by seismic loads. 相似文献
11.
Aref M. O. AL-JABALI NIE Lei Abdo S. AL-MAQTARY Hussein AL-AKHALI Mohammed HAZAEA Fadel AL-AGHBARI 《世界地质(英文版)》2009,12(1):5-12
According to topography of Yemen, most areas and villages are located at obligated crest, toe of mountain and under cliffs. Therefore Al-Huwayshah consisting of Tawilah sandstone group is characterized by steep slope reach to 90° in some areas. This area is affected by strong tectonic movements and faults that occurred during the geological epochs. This effect enhances to find out fractures and joints as well as the rocks become brittle and ready to slide depending on the position of area. And there are some fractures and joints on the surface of the areas due to tectonic movement associated with opening the Red Sea and Gulf of Aden. The rainfalls, fractures, joints, earthquakes, gravity, vegetations, temperatures and human activities play a big role in the processes of rockfalls and landslides in this area. All those factors are considered as the basic causes and catalyzed factors for occurrence of rockfall in the studide area. In addition, the authors carried out laboratory test for many rock samples to get the physical properties of the rocks. 相似文献
12.
《山地科学学报》2021,(8)
Tibetan Plateau is known as the roof of the world. Due to the continuous uplift of the Tibetan Plateau, many active fault zones are present. These active fault zones such as the Anninghe fault zone have a significant influence on the formation of special geomorphology and the distribution of geological hazards at the eastern edge of the Tibetan Plateau. The Anninghe fault zone is a key part of the Y-shaped fault pattern in the Sichuan-Yunnan block of China. In this paper, high-resolution topographic data, multitemporal remote sensing images, numerical calculations, seismic records, and comprehensive field investigations were employed to study the landslide distribution along the active part of the Anninghe. The influence of active faults on the lithology, rock mass structures and slope stress fields were also studied. The results show that the faults within the Anninghe fault zone have damaged the structure and integrity of the slope rock mass, reduced the mechanical strength of the rock mass and controlled the slope failure modes. The faults have also controlled the stress field, the distribution of the plastic strain zone and the maximum shear strain zone of the slope, thus have promoted the formation and evolution of landslides. We find that the studied landslides are linearly distributed along the Anninghe fault zone, and more than 80% of these landslides are within 2-3 km of the fault rupture zone. Moreover, the Anninghe fault zone provides abundant substance for landslides or debris flows. This paper presents four types of sliding mode control of the Anninghe fault zone, e.g., constituting the whole landslide body, controlling the lateral boundary of the landslide, controlling the crown of the landslide, and constituting the toe of the landslide. The results presented merit close attention as a valuable reference source for local infrastructure planning and engineering projects. 相似文献
13.
Submarine landslides occur frequently on most continental margins. They are effective mechanisms of sediment transfer but also a geological hazard to seafloor installations. In this paper, submarine slope stability is evaluated using a 2D limit equilibrium method. Considerations of slope, sediment, and triggering force on the factor of safety (FOS) were calculated in drained and undrained (Φ=0) cases. Results show that submarine slopes are stable when the slope is <16° under static conditions and without a weak interlayer. With a weak interlayer, slopes are stable at <18° in the drained case and at <9° in the undrained case. Earthquake loading can drastically reduce the shear strength of sediment with increased pore water pressure. The slope became unstable at >13° with earthquake peak ground acceleration (PGA) of 0.5 g; whereas with a weak layer, a PGA of 0.2 g could trigger instability at slopes >10°, and >3° for PGA of 0.5 g. The northern slope of the South China Sea is geomorphologically stable under static conditions. However, because of the possibility of high PGA at the eastern margin of the South China Sea, submarine slides are likely on the Taiwan Bank slope and eastern part of the Dongsha slope. Therefore, submarine slides recognized in seismic profiles on the Taiwan Bank slope would be triggered by an earthquake, the most important factor for triggering submarine slides on the northern slope of the South China Sea. Considering the distribution of PGA, we consider the northern slope of the South China Sea to be stable, excluding the Taiwan Bank slope, which is tectonically active. 相似文献
14.
Large-scale shaking table tests were conducted to study the dynamic response of a slope reinforced by double-row anti-sliding piles and prestressed anchor cables. The test results show that the reinforcement suppressed the acceleration amplification effectively. The axial force time histories are decomposed into a baseline part and a vibration part in this study. The baseline part of axial force well revealed the seismic slope stability, the peak vibration values of axial force of the anchor cables changed significantly in different area of the slope under seismic excitations. The peak lateral earth pressure acting on the back of the anti-sliding pile located at the slope toe was much larger than that acting on the back of the anti-sliding pile located at the slope waist. The test results indicate an obvious load sharing ratio difference between these two anti-slide piles, the load sharing ratio between the two anti-sliding piles located at the slope toe and the slope waist varied mainly in a range of 2-5. The anti-slide pile at the slope waist suppressed the horizontal displacement of the slope surface. 相似文献
15.
Weiwei Wang Dawei Wang Shiguo Wu David Völker Hongliu Zeng Guanqiang Cai Qingping Li 《中国海洋大学学报(英文版)》2018,17(1):83-100
Recent and paleo-submarine landslides are widely distributed within strata in deep-water areas along continental slopes, uplifts, and carbonate platforms on the north continental margin of the South China Sea (SCS). In this paper, high-resolution 3D seismic data and multibeam data based on seismic sedimentology and geomorphology are employed to assist in identifying submarine landslides. In addition, deposition models are proposed that are based on specific geological structures and features, and which illustrate the local stress field over entire submarine landslides in deep-water areas of the SCS. The SCS is one of the largest fluvial sediment sinks in enclosed or semi-enclosed marginal seas worldwide. It therefore provides a set of preconditions for the formation of submarine landslides, including rapid sediment accumulation, formation of gas hydrates, and fluid overpressure. A new concept involving temporal and spatial analyses is tested to construct a relationship between submarine landslides and different time scale trigger mechanisms, and three mechanisms are discussed in the context of spatial scale and temporal frequency: evolution of slope gradient and overpressure, global environmental changes, and tectonic events. Submarine landslides that are triggered by tectonic events are the largest but occur less frequently, while submarine landslides triggered by the combination of slope gradient and over-pressure evolution are the smallest but most frequently occurring events. In summary, analysis shows that the formation of submarine landslides is a complex process involving the operation of different factors on various time scales. 相似文献
16.
The Heifangtai platform in Northwest China is famous for irrigation-induced loess landslides. This study conducted a centrifuge model test with reference to an irrigation-induced loess landslide that occurred in Heifangtai in 2011. The loess slope model was constructed by whittling a cubic loess block obtaining from the landslide site. The irrigation water was simulated by applying continuous infiltration from back of the slope. The deformation, earth pressure, and pore pressure were investigated during test by a series of transducers. For this particular study, the results showed that the failure processes were characterized by retrogressive landslides and cracks. The time dependent reductions of cohesion and internal friction angle at basal layer with increasing pore-water pressure were responsible for these failures. The foot part of slope is very important for slope instability and hazard prevention in the study area, where concentration of earth pressure and generation of high pore-water pressures would form before failures. The measurements of earth pressure and pore-water pressure might be effective for early warning in the study area. 相似文献
17.
The objective of this research was to assess the characteristics of seismic induced damage and the deformation patterns of pre-stressed cement-grouted cables that are used for rock slope stabilization projects subjected to quasi-static cyclic loading. The experimental configuration includes the installation of 15 pre-stressed cables in a slope model made of concrete blocks (theoretically rigid rock mass) on top of a pre-existing sliding surface. The study showed that: (i) The pre-stressed cables exhibited great seismic performance. Rapid displacement of the model blocks was observed after the complete loss of the initial pre-stress load under continued applied cyclic loads and exceedance of the state of equilibrium, which implies the higher the initial pre-stress load, the better the seismic performance of the rock anchor; (ii) The failure of the pre-stressed cables was due to fracture at the connection of the tendons and cable heads under cyclic loading. The sequence of failure had a distinct pattern. Failure was first observed at the upper row of cables, which experienced the most severe damage, including the ejection of cable heads. No evidence of de-bonding was observed during the cyclic loading; (iii) The stress distribution of the bond length for pre-stressed cables was highly non-uniform. High stress concentrations were observed at both the fixed end and the free end of the bond length both before and immediately after the state of equilibrium is exceeded. The results obtained can be used to evaluate the overall performance of pre-stressed rock anchors subject to seismic loading and their potential as rockfall prevention and stabilization measures. 相似文献
18.
Submarine landslides have been observed in the Baiyun Depression of the South China Sea. The occurrence of hydrates below these landslides indicates that these slope instabilities may be closely related to the massive release of methane. In this study, we used a simple Monte-Carlo model to determine the first-order deformation pattern of a gravitationally destabilizing slope. The results show that a stress concentration occurs due to hydrate dissociation on the nearby glide surface and on top of a gas chimney structure. Upon the dissolution of the gas hydrate, slope failure occurs due to the excess pore pressure generated by the dissociation of the gas hydrates. When gas hydrates dissociate at shallow depths, the excess pore pressure generated can be greater than the total stress acting at those points, along with the forces that resist sliding. Initially, the failure occurs at the toe of the slope, then extends to the interior. Although our investigation focused only on the contribution of hydrate decomposition to submarine landslide, this process is also affected by both the slope material properties and topography. 相似文献
19.
岩坡稳定性优势面分析法--以太湖度假区休体公园渔洋山边坡为例 总被引：1，自引：0，他引：1
运用优势面理论层次分析法。确定岩坡的控稳优势面．通过对太湖度假区休体公园渔洋山边坡的研究得出F1和软弱夹层是控稳优势面。通过优势面组合分析．得出4组优势分离体。其中F1、软弱夹层和边坡临空面组合为试算安全系数最小优势分离体。最后用Sarma法进行稳定性计算．得出各种优势分离体组合模型在考虑地下水和地震加速度为0．15g的情况下均是不稳定的。结果表明，采用层次分析法对岩坡稳定性进行评价的方法是可行的。 相似文献
20.
动水驱动型顺层岩质滑坡数量多、灾害频发、危害大, 是滑坡地质灾害领域的研究重点, 但目前对于滑坡启滑机制的认识仍不充分, 滑坡的准确预报还面临巨大挑战。鉴于此, 以含软弱夹层的中倾角顺层岩质滑坡为研究对象, 通过构建理想的单层滑带滑坡物理模型, 开展了一系列动水作用下的滑坡模型试验研究。结果表明, 动水作用下顺层岩质滑坡从开始变形至失稳滑动需经历初始变形、缓慢变形、加速变形和失稳破坏4个阶段, 而各个阶段的演化特征与滑面粗糙度和倾角密切相关。滑面倾角越大或粗糙度越小, 滑坡体从开始变形至失稳滑动所需的时间则越短; 相应地, 坡体加速变形阶段越不明显, 滑坡破坏的突发性越强。滑带内的渗流冲蚀作用会使滑带土中的骨料流失, 导致其抗剪强度降低, 进而引发坡体滑动。与此同时, 上覆坡体的压剪作用以及变形演化过程亦将反过来影响冲蚀强度。基于滑带土黏聚力随水力梯度和冲蚀时间的变化关系, 提出了渗流驱动下滑带土黏聚力演化模型, 可较好地描述滑带土黏聚力的退化过程。滑面粗糙度的存在不仅显著影响了滑带的冲蚀劣化规律, 还改变了滑带不同区域的破坏模式。此外, 通过考虑滑面粗糙度对滑带不同区域破坏模式的影响, 开展了动水多效应关联分析, 建立了滑坡地质体力学分析模型, 实现了动水作用下顺层岩质滑坡动态稳定性的有效评估。本研究成果可为实际动水驱动型顺层岩质滑坡的预测和防治提供理论参考。 相似文献