首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 343 毫秒
1.
In wind‐driven rains, wind velocity and direction are expected to affect not only energy input of rains but also shallow ?ow hydraulics by changing roughness induced by raindrop impacts with an angle on ?ow and the unidirectional splashes in the wind direction. A wind‐tunnel study under wind‐driven rains was conducted to determine the effects of horizontal wind velocity and direction on sediment transport by the raindrop‐impacted shallow ?ow. Windless rains and the rains driven by horizontal wind velocities of 6 m s?1, 10 m s?1, and 14 m s?1 were applied to three agricultural soils packed into a 20 by 55 cm soil pan placed on both windward and leeward slopes of 7 per cent, 15 per cent, and 20 per cent. During each rainfall application, sediment and runoff samples were collected at 5‐min intervals at the bottom edge of the soil pan with wide‐mouth bottles and were determined gravimetrically. Based on the interrill erosion mechanics, kinetic energy ?ux (Ern) as a rainfall parameter and product of unit discharge and slope in the form of qbSco as a ?ow parameter were used to explain the interactions between impact and ?ow parameters and sediment transport (qs). The differential sediment transport rates occurred depending on the variation in raindrop trajectory and rain intensity with the wind velocity and direction. Flux of rain energy computed by combining the effects of wind on the velocity, frequency, and angle of raindrop impact reasonably explained the characteristics of wind‐driven rains and acceptably accounted for the differences in sediment delivery rates to the shallow ?ow transport (R2 ≥ 0·78). Further analysis of the Pearson correlation coef?cients between Ern and qSo and qs also showed that wind velocity and direction signi?cantly affected the hydraulics of the shallow ?ow. Ern had a smaller correlation coef?cient with the qs in windward slopes where not only reverse splashes but also reverse lateral raindrop stress with respect to the shallow ?ow direction occurred. However, Ern was as much effective as qSo in the sediment transport in the leeward slopes where advance splashes and advance lateral raindrop stress on the ?ow occurred. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

2.
Aeolian sand transport is a complicated process that is affected by many factors (e.g. wind velocity, sand particle size, surface microtopography). Under different experimental conditions, erosion processes will therefore produce different results. In this study, we conducted a series of wind tunnel experiments across a range of wind velocities capable of entraining sand particles (8.0, 10.0, 12.0, and 14.0 m s-1) to study the dynamic changes of the shear velocity, aerodynamic roughness length, and sand transport. We found that the shear velocity and aerodynamic roughness length are not constant; rather, they change dynamically over time, and the rules that describe their changes depend on the free-stream air velocity. For wind tunnel experiments without feeding sand into the airflow, the sand bed elevation decreases with increasing erosion time, and this change significantly affected the values of shear velocity and aerodynamic roughness length. A Gaussian distribution function described the relationships between the sand transport rate (qT) and the duration of wind erosion (T). It is therefore necessary for modelers to consider both deflation of the bed and the time scale used when calculating sand transport or erosion rates. © 2018 John Wiley & Sons, Ltd.  相似文献   

3.
Barchans, isolated crescent‐shaped bedforms, are believed to be formed under almost unidirectional wind or water ?ows and limited sand supply. The formation of barchan morphologies under the action of purely oscillatory wave motion has not yet been fully investigated. The present study attempted to form barchan topography in a wave ?ume and to compare this with barchans in the ?eld. Barchan morphologies of ripple size, called the barchan ripples, were generated from a ?at bed by the action of waves. The horn width, the distance between horn tips, of the barchan ripples increased linearly with an increase in the total length, the overall length projected on the centre line of the barchan, with a coef?cient common to barchan dunes in deserts. The ratio of horn length to horn width of the barchan ripples was smaller than that of barchan dunes, but similar to that of subaqueous barchans in the ?eld. The longer the wave period was, the larger the ratio of the body length to horn width became. Most subaqueous barchans formed under waves (in the laboratory) and unidirectional ?ows (in the ?eld) had blunter horns than subaerial barchans. The shape of the barchan ripples changed with wave period. The outer rim became rounder with increasing wave period. The relationship between the base area and the height of barchan morphologies seems to be linear, with a constant coef?cient for the scale from ripples to dunes. The barchan ripples showed a linear relationship between the height and the horn width, similar to that for barchan dunes. The migration speed of the barchan ripples was proportional to the cube of the ?ow velocity and was inversely proportional to height. The same relation with a different value of the coef?cient was obtained for barchan dunes. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

4.
The velocity of a wind‐blown sand cloud is important for studying its kinetic energy, related erosion, and control measures. PDA (particle dynamics analyser) measurement technology is used in a wind tunnel to study the probability distribution of particle velocity, variations with height of the mean velocity and particle turbulence in a sand cloud blowing over a sandy surface. The results suggest that the probability distribution of the particle velocity in a blowing sand cloud is stochastic. The probability distribution of the downwind velocity complies with a Gaussian function, while that of the vertical velocity is greatly complicated by grain impact with the bed and particle–particle collisions in the air. The probability distribution of the vertical velocity of ?ne particles (0·1–0·3 mm sands) can be expressed as a Lorentzian function while that of coarse particles (0·3–0·6 mm sands) cannot be expressed by a simple distribution function. The mean downwind velocity is generally one or two orders greater than the mean vertical velocity, but the particle turbulence in the vertical direction is at least two orders greater than that in the downwind direction. In general, the mean downwind velocity increases with height and free‐stream wind velocity, but decreases with grain size. The variation with height of the mean downwind velocity can be expressed by a power function. The particle turbulence of a blowing sand cloud in the downwind direction decreases with height. The variations with height of the mean velocity and particle turbulence in the vertical direction are very complex. It can be concluded that the velocity of a sand cloud blowing over a sandy surface is mainly in?uenced by wind velocity, grain impact with the bed and particle–particle collisions in the air. Wind velocity is the primary factor in?uencing the downwind velocity of a blowing sand cloud, while the grain impact with the bed and particle–particle collisions in the air are the primary factors responsible for the vertical velocity. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

5.
This paper presents results from a study designed to explore the effects of beach surface moisture and fetch effects on the threshold of movement, intensity of sand transport by wind and mass flux. The experiment was carried out over a period of five weeks at Greenwich Dunes, Prince Edward Island, Canada in May and June 2002. Moisture content was measured with a Delta‐T moisture probe over a 50 m by 25 m grid established on the beach. Measurements of wind speed and direction were made with arrays of cup anemometers and a two‐dimensional sonic anemometer. Transport intensity was measured at a height of 2–4 cm above the bed using omnidirectional saltation probes which count the impact of saltating grains on a piezoelectric crystal. Anemometers and saltation probes were sampled at 1 Hz. Sand transport was measured with vertical integrating sand traps over periods of 10–20 minutes. Results show that where there is a considerable supply of dry sand the saltation system responds very rapidly (1–2 s) to fluctuations in wind speed, i.e. to wind gusts. Where sand supply from the surface is limited by moisture, mean transport rates are much lower and this reflects in both a reduction in the instantaneous transport rate and in a transport system that becomes increasingly intermittent. Threshold wind speed is significantly correlated with an increase in surface moisture content near the upwind end of the beach fetch, but the relationship is not significant at the downwind end where sediment transport is initiated primarily by saltation impact from upwind. Mass flux increases with increasing fetch length and the relationship is described best by a power function. Further work is necessary to develop a theoretical function to predict the increase in transport with fetch distance as well as the critical fetch distance. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

6.
A previously published mixing length (ML) model for evaluating the Darcy–Weisbach friction factor for a large‐scale roughness condition (depth to sediment height ratio ranging from 1 to 4) is brie?y reviewed and modi?ed (MML). Then the MML model and a modi?ed drag (MD) model are experimentally tested using laboratory measurements carried out for gravel‐bed channels and large‐scale roughness condition. This analysis showed that the MML gives accurate estimates of the Darcy–Weisbach coef?cient and for Froude number values greater than 0·5 the MML model coincides with the ML one. Testing of the MD model shows limited accuracy in estimating ?ow resistance. Finally, the MML and MD models are compared with the performance of a quasi‐theoretical (QT) model deduced applying the P‐theorem of the dimensional analysis and the incomplete self‐similarity condition for the depth/sediment ratio and the Froude number. Using the experimental gravel‐bed data to calibrate the QT model, a constant value of the exponent of the Froude number is determined while two relationships are proposed for estimating the scale factor and the exponent of the depth/sediment ratio. This indirect estimate procedure of the coef?cients (b0, b1 and b2) of the QT model can produce a negligible overestimation or underestimation of the friction factor. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

7.
The vertical distribution of sand transport characteristics is an important issue in aeolian research. Surface characteristics affect sand transport processes, but their effects are not yet fully understood. To provide more data on this subject, we observed sand transport in 16 field experiments above surfaces covered by fine, medium and coarse sand. The sand transport rate over relatively coarser‐grained medium and coarse surfaces could be expressed as a Gaussian peak function: q z = a + b exp (?0.5[(|z – C h|)/d ]e), where q z is the measured sediment transport at height z above the bed and a , b , C h, d , and e are regression coefficients. The measured sand transport flux peak values (H h) were linearly related to C h, and both values were significantly related to the mean surface grain size. However, for the relatively finer‐grained medium and fine sand surfaces, the sediment transport could be expressed as an exponential function. The cumulative sand transport below 0.1 m was directly related to the mean surface grain size, and the relationship could be expressed as the following exponential function: C z = f + g exp –M z/i , where C z is the cumulative sand transport at height z above the bed, M z is the mean grain size and f , g , and i are regression coefficients. Above 0.1 m, there were no significant relationships between the cumulative sand transport and the mean surface grain size. The mean grain size decreased with increasing height below the peak height and then increased with increasing height. The surface grain size distribution and proportions of the particles in different grain size categories controlled the mean grain size as a function of height. The observed changes in the sand transport rate and grain size with height will provide support for sand disaster mitigation, numerical modelling and studies of dune formation. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

8.
Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

9.
Soil surface microtopography produces non‐uniform surface run‐off, in which narrow threads of relatively deep and fast ?ow move within broader, shallower, slower‐moving regions. This kind of ?ow is probably widespread, given that microtopography is itself common. Methods used to record the properties of surface run‐off include grid‐ or transect‐based depth observations, with a single mean ?ow speed derived by calculation from V = Q/WD, and the use of dye timing to estimate velocity, with an effective mean depth calculated from D = Q/WV. Because these methods allow only single, ?ow‐?eld mean values to be derived for V or D, neither is well suited to non‐uniform ?ows. The use of depth data to derive a ?ow‐?eld mean V furthermore implicitly applies area weighting to the depth data; likewise, the use of dye speeds for V inherently overestimates mean V because dye dominantly follows the faster ?ow threads. The associated errors in derived parameters such as friction coef?cients are not readily quanti?ed and appear not to have been addressed previously. New ?eld experiments made on untilled soil surfaces in arid western NSW, Australia, explore these circumstances and the implications for deriving meaningful measures of ?ow properties, including friction coef?cients. On surfaces deliberately chosen for their very subtle microtopography, average thread velocities are shown to be commonly 2·5 times greater than the ?ow‐?eld mean, and locally 6–7 times greater. On the other hand, non‐thread ?ow speeds lie below the ?ow‐?eld mean, on average reaching only 84 per cent of this value, and often considerably less. Flow‐?eld means conceal the existence of regions of the ?ow ?eld whose properties are statistically distinct. Results con?rm that a reliance on ?ow‐?eld average depths yields estimates of friction coef?cients that are biased toward the shallower, high‐roughness parts of the ?ow, while if dye speeds are relied upon the results are biased toward the deeper, smoother threads of ?ow. A new approach to the evaluation of friction coef?cients in non‐uniform ?ows is advanced, involving the determination of separate coef?cients for threads and non‐thread zones of the ?ow ?eld. In contrast, ?ow‐?eld friction coef?cients as they are customarily derived in run‐off plot experiments subsume these distinct coef?cients in proportions that are generally unknown. The value of such coef?cients is therefore questionable. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

10.
  相似文献   

11.
Maps are presented of the spatial distribution of two‐dimensional bedload transport velocity vectors. Bedload velocity data were collected using the bottom tracking feature of an acoustic Doppler current pro?ler (aDcp) in both a gravel‐bed reach and a sand‐bed reach of Fraser River, British Columbia. Block‐averaged bedload velocity vectors, and bedload velocity vectors interpolated onto a uniform grid, revealed coherent patterns in the bedload velocity distribution. Concurrent Helley‐Smith bedload sampling in the sand‐bed reach corroborated the trends observed in the bedload velocity map. Contemporaneous 2D vector maps of near‐bed water velocity (velocity in bins centered between 25 cm and 50 cm from the bottom) and depth‐averaged water velocity were also generated from the aDcp data. Using a vector correlation coef?cient, which is independent of the choice of coordinate system, the bedload velocity distribution was signi?cantly correlated to the near‐bed and depth‐averaged water velocity distributions. The bedload velocity distribution also compared favorably with variations in depth and estimates of the spatial distribution of shear stress. Published in 2004 by John Wiley & Sons, Ltd.  相似文献   

12.
Point of the Mountain spit and Fingerpoint spit are two of the largest geomorphic features of Pleistocene Lake Bonneville of the western Great Basin, USA. The spits and their associated shorelines show distinctly different geomorphic expression and genesis; this is a function of their positions within the lake and the dynamics of the waves and storms that formed them. Mapping of geomorphic features, geometry of erosional features, and detailed lithologic analysis of shoreline deposits are used to determine dominant modes of sediment erosion and deposition. The Point of the Mountain spit, located in the eastern portion of the basin, was formed as a result of highly fractured bedrock in a salient of the Wasatch Front being exposed to wave trains that approached from the north‐northwest causing north‐to‐south longshore sediment transport. Shoreline development and sediment transport on the southern portion of the spit were minimal. The Fingerpoint spit, located on an island in the northwest portion of the basin, was formed by bidirectional longshore sediment transport as the result of waves that approached from both the north‐northeast and the south‐southwest. Spit development is a function of surface wave energy and direction which in turn is the integrated result of wind direction, wind intensity, and fetch. Wave transport direction determined from ?eld measurements at Point of the Mountain spit corresponds very well to the direction of maximum fetch (c. 200 km). For the Fingerpoint spit, the hypothesized wave transport direction from the south corresponds with the direction of maximum fetch (c. 350 km). However, wave energy transport from the north had limited fetch (c. 100 km), implying that wind intensity from the north was relatively large. The geometry of the two large Bonneville spits suggests the predominant wind direction from storms during the Pleistocene was from the north and points the way for future studies that can aid in further understanding the nature of Pleistocene wind ?elds in the Great Basin. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

13.
Estimates of the wind shear stress exerted on Earth's surface using the fully rough form of the law‐of‐the‐wall are a function of the aerodynamic roughness length, z0. Accurate prediction of aeolian sediment transport rates, therefore, often requires accurate estimates of z0. The value of z0 is determined by the surface roughness and the saltation intensity, both of which can be highly dynamic. Here we report field measurements of z0 values derived from velocity profiles measured over an evolving topography (i.e. sand ripples). The topography was measured by terrestrial laser scanning and the saltation intensity was measured using a disdrometer. By measuring the topographic evolution and saltation intensity simultaneously and using available formulae to estimate the topographic contribution to z0, we isolated the contribution of saltation intensity to z0 and document that this component dominates over the topographic component for all but the lowest shear velocities. Our measurements indicate that the increase in z0 during periods of saltation is approximately one to two orders of magnitude greater than the increase attributed to microtopography (i.e. evolving sand ripples). Our results also reveal differences in transport as a function of grain size. Each grain‐size fraction exhibited a different dependence on shear velocity, with the saltation intensity of fine particles (diameters ranging from 0.125 to 0.25 mm) saturating and eventually decreasing at high shear velocities, which we interpret to be the result of a limitation in the supply of fine particles from the bed at high shear velocities due to bed armoring. Our findings improve knowledge of the controls on the aerodynamic roughness length and the grain‐size dependence of aeolian sediment transport. The results should contribute to the development of improved sediment transport and dust emission models. © 2018 John Wiley & Sons, Ltd.  相似文献   

14.
During bedload movement by saltation, streamwise momentum is transferred from the ?ow to the saltating grains. When the grains collide with other grains on the bed or in the ?ow, streamwise momentum is reduced, and there is a decrease in streamwise ?ow velocity and an increase in ?ow resistance, herein termed bedload transport resistance fbt. Based on experiments in two ?umes with ?xed and mobile plane beds and previously published data, an equation is developed that may be used to predict fbt for both capacity and non‐capacity ?ows. The variables in this equation are identi?ed by dimensional analysis and the coef?cients are determined by non‐linear regression. This equation applies to rough turbulent open‐channel ?ows, where the relative submergence is between 1 and 20 and the entire sediment load moves by saltation. An investigation of the relative magnitudes of fbt and grain resistance fc suggests that where dimensionless shear stress θ is less than 1 and saltation is the dominant mode of bedload transport, fbt/fc increases with θ but never exceeds 1. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

15.
Experiments were conducted on Magilligan Strand, Northern Ireland, to assess the influence of the fetch effect on aeolian sediment transport. During each experiment surface sediments were uniformly dry and unhindered by vegetation or debris. The leading edge of erodible material was well defined, with the limit of wave up‐rush demarcating the wet–dry boundary; the work was conducted during low tides. A number of electronic and integrating traps were utilised, with two ultrasonic anemometers used to measure wind direction and velocity at 1 Hz. The combination of 1o direction data and trap locations resulted in a range of fetch distances, from 2 to 26 m. Data integrated over 15‐minute intervals (corresponding to the integrating trap data) revealed a distinct trend for all the experiments. An initial rapid increase in the transport rate occurred over a short distance (4–9 m). This maximum transport rate was maintained for a further 5–6 m before a steady decay in the flux followed, as fetch distance increased. A measured reduction in wind speed (6–8%) across the beach suggests a negative feedback mechanism may be responsible for the diminishing transport rate: the saltating grains induce energy dissipation, thus reducing the capability of the wind to maintain transport. For one experiment, the presence of compact sediment patches may also have contributed to the reduction of the transport rate. The decay trend calls into question the utility of the fetch effect as an important parameter in aeolian studies that seek to understand sediment budgets of the foredune‐beach zone. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

16.
A two‐dimensional numerical model of the saltation process was developed on a parallel computer in order to investigate the temporal behaviour of transport rate as well as its downwind distribution. Results show that the effects of unsteady flow on the transportation of particulates (sediment) have to be considered in two spatial dimensions (x, y). Transport rate Q(x, t) appears in the transport equation for mass M(x, t): where A = ΔxW denotes unit area composed of unit streamwise length Δx and width W. S(x, t) (units kg m−2 s−1) stands for the balance over the splash process. A transport equation for transport rate itself is suggested with U c (x, t) a mean particle velocity at location x as the characteristic velocity of the grain cloud. For a steadily blowing wind over a 50 m long sediment bed it was found that downwind changes in Q cease after roughly 10–40 m, depending on the strength of the wind. The onset of stationarity (∂/∂t=0) was found to be a function of the friction velocity and location. The local equilibrium between transport rate and wind was obtained at different times for different downstream locations. Two time scales were found. One fast response (in the order of 1) to incipient wind and a longer time for equilibrium to be reached throughout the simulation length. Transport rate also has different equilibrium values at different locations. A series of numerical experiments was conducted to determine a propagation speed of the grain cloud. It was found that this velocity relates linearly to friction velocity. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

17.
During bed‐load transport by overland ?ow, momentum is transferred from the ?ow to the bed via grain collisions, resulting in a decrease in ?ow velocity and an increase in ?ow resistance, herein termed bed‐load transport resistance. In overland ?ow on mobile plane beds, total ?ow resistance f consists of grain resistance fg and bed‐load transport resistance fbt. In order to identify and evaluate the relative importance of the factors controlling fbt, 38 ?ume experiments were performed on slopes of 2·7 and 5·5° using sediment with median diameters of 0·74 and 1·16 mm. All ?ows were supercritical and turbulent. This study is an extension of a recent study by Gao and Abrahams (Earth Surface Processes and Landforms 2004, vol. 29, pp. 423–435). These authors found that fbt is controlled by three factors: sediment concentration C, dimensionless sediment diameter D*, and relative submergence h/D, where h is ?ow depth, D is median sediment diameter. However, a new dimensional analysis identi?es two additional factors: Froude number F and slope S. Multiple regression analyses reveal (1) that these ?ve factors together explain 97 per cent of the variance of fbt, and (2) that S controls fbt entirely through C. The variable C is therefore redundant, and a new functional equation relating fbt to D*, h/D, S and F is developed. This equation may be used to predict fbt. An advantage of this equation is that it may be used to predict fbt without measuring bed‐load transport rate. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

18.
Velocity measurements carried out by an acoustic doppler velocimeter (ADV) in a rectangular laboratory ?ume having a gravel bed are presented. The velocity pro?les are measured in six verticals of the channel cross‐section having an increasing distance (from 4 to 38·5 cm) from the ?ume wall. The experimental runs are carried out for ?ve different bed arrangements, characterized by different concentrations of coarser elements, and for the two conditions of small‐ and large‐scale roughness. For both hydraulic conditions, the velocity measurements are ?rst used to test the applicability of the Dean pro?le and of the logarithmic pro?le corrected by a divergence function proposed in this paper. Then, for each value of the depth sediment ratio h/d84, the non‐dimensional friction factor parameter is calculated by integration of the measured velocity distributions in the different verticals of the cross‐section. Finally a semi‐logarithmic ?ow resistance equation is empirically deduced. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

19.
Near‐surface airflow over a morphologically simple, vegetated, 8 m high foredune with a small wave‐cut scarp was measured for onshore to oblique‐onshore conditions during a low‐moderate (5–6 m s‐1 ) wind event and a high velocity (11–18 m s‐1) sand‐transporting gale event. Flow across the foredune was characterized by significant flow compression and acceleration up and across the foredune during both events. During the gale, a pronounced jet (speed bulge) developed at the foredune crest, which increased in magnitude with increasing wind speed. The vertical (W) velocity component of the 3D flow field was positive (upwards) across the stoss slope under low wind conditions but negative (downwards) during gale wind conditions, with upslope acceleration. During the low velocity event, there was speed‐down within the vegetation canopy, as would be expected for a porous roughness cover. During the strong wind event there was speed‐up in the lower portion of the vegetation canopy, and this was found up the entire stoss slope. Sediment transport during the gale force event was substantial across the beach and foredune despite the moderate vegetation cover and minimum fetch. Aeolian suspension was evident in the lee of the dune crest. The observations presented herein show that strong storm winds are an effective mechanism for translating sediment landwards across a high vegetated foredune, contributing sediment to the stoss slope, crest and leeward slopes of the foredune and backing dunes. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

20.
The effect of large roughness elements on sand transport efficiency was evaluated on a coastal sand sheet by measuring sand flux with two types of sand traps [Big Spring Number Eight (BSNE) and the Cox Sand Catcher (CSC)] at 30 positions through a 100 m‐long × 50 m‐wide roughness array comprised of 210 elements each with the dimensions 1·17 m long × 0·4 m high × 0·6 m wide. The 210 elements were used to create a roughness density (λ) of 0·022 (λ = n bh/S, where n is the number of elements, b the element breadth, h the element height, and S is the area of the surface that contains all the elements) in an area of 5000 m2. The mean normalized saltation flux (NSF) values (NSF = outgoing sand flux/incoming sand flux) at the furthest downwind distance for the two trap types were 0·44 and 0·41, respectively. This is in excellent agreement with an empirical model prediction of 0·5. The reduction in saltation flux is similar to an earlier separate study for an equivalent λ composed of elements of similar height (0·36 m), even though the roughness element forms were different (rectangular in this study as opposed to circular) as were the horizontal porosity of the arrays (49% versus 16%). This corroborates earlier results that roughness element height is a critical parameter that enhances reduction in sand transport by wind for similar λ configurations. The available data suggest the form of the relationship between transport reduction efficiency and height is likely a power relationship with two limiting conditions: (1) for elements ≤ 0·1 m high the effect is minimized, and (2) as element height matches and then exceeds the maximum height of the saltation layer (≥ 1 m), the effect will stabilize near a maximum of NSF ≈ 0·32. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号